155Mbps ATM-Single Mode Transceiver

155Mbps ATM-Single Mode Transceiver
SFP, Duplex LC Connector, 1310nm FP LD for Single Mode Fiber, RoHS Compliant
Digital Diagnostics Functions
Features
Applications





Fast Ethernet
FDDI
ATM/SONET OC-3/SDH STM-1
Single mode fiber links
Optical-Electrical Interface Conversion
RoHS Pb

1310nm FP LD

Data Rate: 155Mbps, NRZ

Single +3.3V Power Supply

RoHS Compliant and Lead-free

AC/AC Differential Electrical Interface

Compliant with Multi-Source Agreement (MSA)
Small Form Factor Pluggable (SFP)

Compliant with SFF-8472 Digital Diagnostic
Monitoring Interface

Duplex LC Connector

Compliance with 100Base-FX of IEEE802.3u
Standard

Compliance with FDDI PMD Standard

Compliance with ATM Standard
Description
The CT-0155TSP-MB5L-D from Coretek Opto Corp. is the high performance and cost-effective module for
serial optical data communication applications specified for single mode of 155 Mb/s. It operates with +3.3V
power supply. The module is intended for Single-mode fiber, operates at a nominal wavelength of 1310nm and
complies with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP). Each module is integrated
digital diagnostics functions via an I2C serial interface.
The module is a duplex LC connector transceiver designed to provide an ATM/SONET OC-3/SDH STM-1
compliant link for 155 Mb/s intermediate reach applications. The characteristics are performed in accordance with
Telcordia Specification GR-468-CORE.
EMC
Most equipment utilizing high-speed transceivers will be required to meet the following requirements:
1) FCC in the United States
2) CENELEC EN55022 (CISPR 22) in Europe
To assist the customer in managing the overall equipment EMC performance, the transceivers have been
designed to satisfy FCC class B limits and provide good immunity to radio-frequency electromagnetic fields.
Eye Safety
The transceivers have been designed to meet Class 1 eye safety and comply with EN 60825-1.
Coretek Opto Corp.
http://www.coretek.com.tw
1F,10 Industry E. Rd. IV., Science-Based Industrial Park, Hsinchu, Taiwan, R.O.C.
Tel:886-3-5787871
Fax:886-3-5645105
Page 1 of 5
02/02/2007
Version:D
155Mbps ATM-Single Mode Transceiver
Product Information
Model Number
CT-0155TSP-MB5L-D
Operating Voltage
& SD Output
3.3V TTL AC/AC
ABSOLUTE MAX RATINGS
PARAMETER
Storage Temperature
Supply Voltage
Data Input Voltage
OPERATING CONDITIONS
PARAMETER
Case Operating Temperature
Supply Voltage
Data Input Voltage Swing
ELECTRICAL CHARACTERISTICS
PARAMETER
Transmitter
Transmitter Supply Current
Tx_ Disable Input Voltage - Low
Tx_ Disable Input Voltage - High
Tx_ Fault Output Voltage - Low
Tx_ Fault Output Voltage - High
Receiver
Receiver Supply Current
Receiver Data Output Differential Voltage
Rx_LOS Output Voltage - Low
Rx_LOS Output Voltage - High
MOD_DEF (1) , MOD_DEF (2) - Low
MOD_DEF (1) , MOD_DEF (2) - High
LD Type &
Wavelength
1310 nm FP
Distance
15 km
SYMBOL
TS
VCC
---
MIN
-40
0
0
SYMBOL
TA
VCC
VID
MIN.
0
3.1
400
Spectral Width (RMS)
Optical Rise time ( 10%-90% )
Optical Fall time ( 10%-90% )
Output Eye
Coretek Opto Corp.
http://www.coretek.com.tw
Sensitivity
-15 ~ -8 dBm
≦-32 dBm
MAX
85
6
Vcc
TYP.
UNIT
℃
V
V
NOTE
MAX.
70
3.5
1600
UNIT
℃
V
mV
SYMBOL
MIN
MAX
UNIT
ICCT
VIL
VIH
VOL
VOH
0
2.0
0
2.0
200
0.8
Vcc
0.8
Vcc
mA
V
V
V
V
ICCR
VOD
VOL
VOH
VIL
VIH
0.4
0
2.0
-0.6
Vcc × 0.7
100
1.3
0.8
Vcc
Vcc × 0.3
Vcc + 0.5
mA
V
V
V
V
V
TRANSMITTER ELECTRO-OPTICAL CHARACTERISTICS
PARAMETER
Optical Output Power
Extinction Ratio
Center Wavelength
Output Power
SYMBOL
Po
ER
λc
Δλ
tr
tf
MIN
-15
8.2
1263
TYP.
MAX
-8
NOTE
UNIT
dBm
dB
1310
1360
nm
7.7
nm
2.0
ns
2.0
ns
Compliant with ITU recommendation G.957
1F,10 Industry E. Rd. IV., Science-Based Industrial Park, Hsinchu, Taiwan, R.O.C.
Tel:886-3-5787871
Fax:886-3-5645105
NOTE
NOTE
1
Page 2 of 5
02/02/2007
Version:D
155Mbps ATM-Single Mode Transceiver
RECEIVER ELECTRO-OPTICAL CHARACTERISTICS
PARAMETER
Maximum Input Optical Power
Receiver Sensitivity
Operating Wavelength
Loss of Signal - Asserted
Loss of Signal - Deasserted
Loss of Signal - Hysteresis
SYMBOL
Pmax
Pmin
λ
PA
PD
P D- P A
MIN
-3
TYP.
MAX
-32
1600
1100
-45
PA +0.5
0.5
-31
4
UNIT
dBm
dBm
nm
dBm
dBm
dB
NOTE
2
2
Notes:
1. Measured average power coupled into 9/125μm single mode fiber.
2. Measured with 223-1 PRBS at BER<10-10
TIMING CHARACTERISTICS
PARAMETER
TX_DISABLE Assert Time
TX_DISABLE Negate Time
Time to initialize, include reset of TX_FAULT
TX_FAULT from fault to assertion
TX_DISABLE time to start reset
Receiver Loss of Signal Assert Time (off to on)
Receiver Loss of Signal Assert Time (on to off)
SYMBOL
t_off
t_on
t_init
t_fault
t_reset
tA,RX_LOS
tD,RX_LOS
MIN
TYP.
10
MAX
10
1
300
100
100
100
UNIT
μs
ms
ms
μs
μs
μs
μs
NOTE
BLOCK DIAGRAM OF TRANSCEIVER
E le c tric a l S u b -a s s e m b ly
TD+
TD-
L D D riv e r
LD
T X D is a b le
T X F a u lt
(0 )
(1 )
(2 )
M O D _D EF
RD+
RD-
P o s t-A m p
O p tic a l
S u b -a s s e m b ly
D u p le x L C
R e c e p ta c le
P re Amp
RX _LO S
Coretek Opto Corp.
http://www.coretek.com.tw
1F,10 Industry E. Rd. IV., Science-Based Industrial Park, Hsinchu, Taiwan, R.O.C.
Tel:886-3-5787871
Fax:886-3-5645105
Page 3 of 5
02/02/2007
Version:D
155Mbps ATM-Single Mode Transceiver
PIN OUT DIAGRAM OF TRANSCEIVER
20
V
19
T
1
V
TD-
2
Tx Fault
18
TD+
3
Tx Disable
17
V
EE
T
4
MOD-DEF2
16
V
CC
T
5
MOD-DEF1
15
V
CC
R
6
MOD-DEF0
14
V
EE
R
7
Rate Select
13
RD+
8
LOS
12
RD-
9
V
EE
R
11
V
10
V
EE
R
EE
EE
R
Top of Board
EE
T
Buttom of Board (As Viewed
through Top of Board
PIN OUT TABLE
Pin
1
Symbol
Functional Description
VeeT
Transmitter Ground
2
TX Fault
Transmitter Fault Indication
3
TX Disable
Transmitter Disable – Module disables on high or open
4
MOD-DEF(2)
Module Definition 2 – Two wire serial ID interface
5
MOD-DEF(1)
Module Definition 1 – Two wire serial ID interface
6
MOD-DEF(0)
Module Definition 0 – Grounded in module
7
Rate Select
Not Connected
8
LOS
Loss of Signal
9
VeeR
Receiver Ground
10
VeeR
Receiver Ground
11
VeeR
Receiver Ground
12
RD-
Inverse Received Data Out
13
RD+
Received Data Out
14
VeeR
Receiver Ground
15
VccR
Receiver Power
16
VccT
Transmitter Power
17
VeeT
Transmitter Ground
18
TD+
Transmitter Data In
19
TD-
Inverse Transmitter Data In
20
VeeT
Transmitter Ground
Coretek Opto Corp.
http://www.coretek.com.tw
1F,10 Industry E. Rd. IV., Science-Based Industrial Park, Hsinchu, Taiwan, R.O.C.
Tel:886-3-5787871
Fax:886-3-5645105
Page 4 of 5
02/02/2007
Version:D
155Mbps ATM-Single Mode Transceiver
RECOMMENDED CIRCUIT SCHEMATIC
RES
Vcc
VEET
VCCT
RES
Tx Fault
Tx Disable
130
LD
Driver
TD+
Z o  50 
TD-
Z o  50 
82
130
82
VCCT
VCCR
Pre
Amp
Post
Amp
L1
C2
Vcc
L2
C3
C1
RD-
Z o  50 
RD+
Z o  50 
System
100
Vcc
RES
RES
RES
EEPROM
RES
RX_LOS
MOD-DEF(2)
MOD-DEF(1)
MOD-DEF(0)
Note : 4.7 K  RES  10K
L1, L2 1H
C110F
C2,C3  0.1F
MECHANICAL DIMENSIONS
Units in mm
All dimensions are ±0.2mm unless otherwise specified.
Claim:
CORETEK Opto Corp. reserves the right to make changes in the specification described hereinafter without prior notice.
Coretek Opto Corp.
http://www.coretek.com.tw
1F,10 Industry E. Rd. IV., Science-Based Industrial Park, Hsinchu, Taiwan, R.O.C.
Tel:886-3-5787871
Fax:886-3-5645105
Page 5 of 5
02/02/2007
Version:D
Download PDF
Similar pages