Industrial 1-Port Ultra PoE to 2-Port 802.3bt/at Gigabit PoE Extender

IPOE-E172
Industrial 1-Port Ultra PoE to 2-Port 802.3bt/at
Gigabit PoE Extender
Physical Port
• 3 10/100/1000BASE-T Gigabit RJ45 interfaces
–– 1-port data + power input
–– 2-port data + power output
Power over Ethernet
• 1-port data + power input
–– Complies with IEEE 802.3bt/at Power over Ethernet endspan/mid-span PD
–– Supports PoE input power up to 95 watts
Ultra PoE Solution for Breaking RJ45 100m Limitation
PLANET IPOE-E172 is an industrial IP63-rated 1-port Ultra PoE to 2-port
802.3bt/at Gigabit PoE Extender designed especially for point to multipoint PoE
• 2-port data + power output
–– Complies with IEEE 802.3af/802.3at/802.3bt Power over
application. The IPOE-E172 can obtain a maximum of 95-watt PoE power from
Ethernet/end-span + mid-span PSE
ultra PoE input port and supplies a maximum of 60-watt PoE power budget
–– Up to 1 IEEE 802.3bt device powered
for 2 PoE output ports, extending both the Gigabit Ethernet Data and IEEE
–– Up to 2 IEEE 802.3af/802.3at devices powered
802.3bt/802.3at Power over Ethernet over the UTP cable. The IPOE-E172
provides a simple solution for adding PoE ports without running more cabling and
achieves more flexible network applications without requiring an external power
adapter.
1 In 1 Out
60W
50W
Power
100m
• Extends the range of PoE to an additional 100 meters
(328ft.)
PoE PTZ IP Camera
PoE Extender
25W+25W
1 In 2 Out
IEEE 802.3at
100m
UPoE
100m
IEEE 802.3at
100m
802.3bt PoE+ Injector/Switch
Layer 2 Features
• Hardware-based 10/100Mbps, half/full duplex and 1000Mbps
Power
Data
–– Auto detects powered device (PD)
device
IEEE 802.3bt
802.3bt PoE+ Injector/Switch
60W
output ports
• Forwards both Ethernet data and PoE power to remote
UPoE
100m
Data
–– Supports total PoE budget up to 60 watts for 2 PoE
PoE Dome IP Camera
PoE Extender
full duplex mode, flow control, auto-negotiation and auto
MDI/MDI-X
• Features Store-and-Forward mode with wire-speed filtering
and forwarding rates
30W
10W+10W
1 In 2 Out
pressure for half duplex operation
Power
IEEE 802.3af
Data
100m
PoE+
100m
IEEE 802.3af
100m
802.3at PoE+ Injector/Switch
PoE Extender
• IEEE 802.3x flow control for full duplex operation and back
PoE Dome IP Camera
• Integrates address look-up engine, supporting 2K absolute
MAC addresses
• 9K jumbo frame support in 1000Mbps duplex mode
• Automatic address learning and address aging
• Supports CSMA/CD protocol
Data Sheet
1
1
IPOE-E172
Weather-proof RJ45 Ethernet Connector and Shielded Plug
Industrial Case and Installation
The IPOE-E172 is ideal for installing an extended range of outdoor PoE devices
• IP63-rated aluminum case
such as outdoor PoE wireless access points, outdoor PoE IP cameras, outdoor
• Wall-mount design
PoE IP intercoms and much more. The IPOE-E172 is equipped with 3-port
• Waterproof and dustproof
10/100/1000BASE-T auto-negotiation weather-proof RJ45 connectors and 3
• Supports 2000 VDC Ethernet ESD protection
shielded RJ45 plugs for direct attach applications. These shielded RJ45 plugs can
make the general UTP cable weather-proof. When connected to the weather-proof
• -40 to 75 degrees C operating temperature
RJ45 connector, it provides tight and strong connection, and ensures it comes with
• No external power cable required for installation
the industrial protection rating of IP63 capable of withstanding humidity, dirt, dust,
• Plug and Play installation
shock, vibrations, heat and cold.
+
+
=
Environmentally Hardened Design
With industrial-level IP63-rated aluminum case, the IPOE-E172 provides a high level of immunity against electromagnetic interference, and is able to protect
itself from dust and water ingress and to operate under the temperature range from -40 to 75 degrees C. All these features ensure the highest level of
reliability for mission-critical applications in any difficult environment.
2
IPOE-E172
Intelligent PoE Power Budget Alert
The IPOE-E172 helps users to monitor the current status of PoE power usage easily via its advanced LED indication, which is called “Budget Alert” on the
front panel of the IPOE-E172. When the PoE output power reaches 50 watts, this Budget Alert LED will light up.
Plug and Play, and Easy Cabling Installation
The IPOE-E172 is quite easy to be installed by simply Plug and Play. It is used between a power source equipment (PSE) and a powered device (PD). The
IPOE-E172 injects power to the PD without affecting the data transmission performance. The IPOE-E172 offers a cost-effective and quick solution to doubling
the standard range of PoE from 100 to 200 meters. The IPOE-E172 is designed in a compact box containing three RJ45 ports, of which one "PoE IN" port
functions as PoE (Data and Power) input and the other two "PoE OUT" ports on the other side function as PoE (Data and Power) output. The "PoE OUT"
port is also the power injector that transmits DC voltage over the Cat5/5e/6 cable and transfers data and power simultaneously between the PSE and PD.
Applications
One Power Sourcing for Multi Powered Devices Solution
To achieve the benefits of IP surveillance and the long-distance IP camera distribution, PLANET IPOE-E172 is quite a useful device for users who have
most of their network already set up, and wish to expand network communications and overcome cable distance limitations offering connections to devices in
locations where traditional networking does not allow.
Control Center
PoE
802.3at/bt
PSE/PoE+ Switch
IPOE-E172
100m
PoE
PoE
PoE
100m
100m
PoE
PoE
IP Camera
IP Camera
3
IPOE-E172
The IPOE-E172 industrial 1-port ultra PoE to 2-port 802.3bt/at Gigabit PoE Extender, powered by a PSE over standard RJ45 cable, requires very little
installation time and does not require any additional setup or programming. The ultra PoE injector port of the PSE supplies IEEE 802.3bt PoE power to the
IPOE-E172 and then the IPOE-E172 converts the power for 2 powered devices that are IEEE 802.3af/at PoE standard compliant, meaning any additional
power adapter for IP cameras and wireless access points is not necessary.
PoE
PoE
20m
20m
PoE
PoE
PoE
802.3af/at PoE+ Out
IPOE-E172
802.3at/bt PoE+ In
PoE
100m
Specifications
Model
IPOE-E172
Hardware Specifications
Network Connector
PoE In Port
1 x 10/100/1000BASE-T Ethernet with 802.3bt/at PoE “Data + Power” in, auto MDI/MDI-X,
auto-negotiation RJ45 connector
PoE Out Port
2 x 10/100/1000BASE-T Ethernet with IEEE 802.3af/at/bt PoE “Data + Power” out, auto MDI/MDI-X, auto-negotiation
RJ45 connector
Switch Architecture
Store-and-Forward switch architecture
MAC Address Table
2K MAC address table with auto learning function
Data Buffer
1Mbit
Switch Fabric
6Gbps
Switch Throughput
4.46Mpps @ 64 bytes
Flow Control
IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Jumbo Frame
9KB
ESD Protection
2KV DC
Enclosure
IP63 aluminum case
Installation
Wall-mount kit
LED Display
System: PWR (green)
Budget Alert (Red)
PoE Input Port: LNK/ACT (green)
1000 (green)
Per PoE Output Port: LNK/ACT (green)
PoE-in-Use (orange)
4
IPOE-E172
Cable
Twisted-pair cable :
10BASE-T: 2-pair UTP Cat3, 4, 5 up to 100 meters
100BASE-TX: 2-pair UTP Cat5, 5e up to 100 meters
1000BASE-T: 4-pair UTP Cat5e, 6 up to 100 meters
Dimensions (W x D x H)
199.6 x 81 x 40 mm
Weight
373g
Power Consumption
60 watts/204BTU (Full loading with PoE function)
Power over Ethernet
PoE Standard
PoE In Port
IEEE 802.3bt/at Power over Ethernet end-span/mid-span PD class 4 PD
Per PoE Out Port
IEEE 802.3bt 4-pair Power over Ethernet end-span + mid-span PSE
IEEE 802.3at Power over Ethernet Plus end-span + mid-span PSE
IEEE 802.3af Power over Ethernet end-span + mid-span PSE
PoE Power Supply Type
PoE In Port
44~57V DC, max. 95 watts
Per PoE Out Port
44~55V DC, max. 60 watts
Power Pin Assignment
PoE In Port
1/2 (+), 3/6 (-); 4/5 (+), 7/8 (-)
Per PoE Out Port
1/2 (-), 3/6 (+); 4/5 (+), 7/8 (-)
Standards Conformance
Regulatory Compliance
FCC Part 15 Class A, CE
Stability Testing
IEC 60068-2-32 (free fall)
IEC 60068-2-27 (shock)
IEC 60068-2-6 (vibration)
Standards Compliance
IEEE
IEEE
IEEE
IEEE
IEEE
IEEE
IEEE
802.3 Ethernet
802.3u Fast Ethernet
802.3ab Gigabit Ethernet
802.3x Flow Control
802.3af Power over Ethernet
802.3at Power over Ethernet Plus
802.3bt 4-pair Power over Ethernet
Environment
Operating
Storage
Temperature: -40 ~ 75 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Temperature: -40 ~ 85 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Accessory
Standard Accessories
User’s Manual x 1
Waterproof RJ45 Connector x 3
Wall-mounted Kit x 1
5
IPOE-E172
Three View Diagram
IPOE-E172
PWR
LNK/ACT
10/100/1000T
1000
Budget Alert
PoE IN
PoE 1 Out
PoE 2 Out
LNK
ACT
PoE In-use
Ordering Information
IPOE-E172
Industrial 1-Port Ultra PoE to 2-Port 802.3bt/at Gigabit PoE Extender
PLANET Technology Corporation
11F., No.96, Minquan Rd., Xindian Dist., New Taipei City
231, Taiwan (R.O.C.)
Tel: 886-2-2219-9518 Fax: 886-2-2219-9528
Email: sales@planet.com.tw www.planet.com.tw
IPOE-E172
PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of
their respective owners. Copyright © 2017 PLANET Technology Corp. All rights reserved.
6
Download PDF
Similar pages