Ty-Rap - Pneumatic Cable Tie Installation Tool

Boost Productivity and Reduce User Fatigue in
Demanding, High-Volume Cable Tie Installations!
Pneumatic Cable Tie
Installation Tool
3
1
2
3
5
6
1
2
3
4
5
6
7
8
Easy-access tension wheel sets
tensile strength up to 50 lb
4
Locking mechanism enables constant
tension for repetitive work
Dual hangers for organized storage
Handy access to spare cutting blade
in handle
Over-sized trigger for easy activation
Soft, over-molded hand grip
Narrow-shaped nose rotates 360˚
for tight spaces
9-ft. air hose included with tool
8
7
Ty-Rap® Pneumatic Cable Tie
Installation Tool
360˚ Rotating Nose
Maximizes Flexibility
in Tight Spaces —
No Twisting Required!
For fast, consistent installation of cable ties in highvolume applications, you can’t beat the new Ty-Rap®
Pneumatic Cable Tie Installation Tool. Pneumatic power
combined with ergonomic design enables you to tension and
trim large quantities of Ty-Rap® cable ties in rapid succession with
accuracy and one-button ease.
High on operator comfort, this tool packs performance features as well. Rotate
the narrow nose 360˚ to maneuver in the tightest of spaces with ease. Set the tension
with a quick twist of the tension-adjustment wheel — located near the nose for convenient
access. For repetitive work requiring a constant tension, use the tension lock to prevent
accidental change of setting when you put down and pick up the tool again.
A storage slot in the handle even keeps a spare cutting blade readily at hand.
Use the Ty-Rap® Pneumatic Cable Tie Installation Tool to install Ty-Rap® cable ties
from 18 to 50 lb in tensile strength.
Typical Applications
• Panel building
• Wiring-harness assembly
• Other OEM applications involving high-volume
installation of cable ties
Specifications
Dimensions:
10"L x 6-1/4"H x 1-5/8"D
Weight:
14 oz.
Operating Pressure:
85–100 psi (non-lubricated air)
Cable Tie
Tensile-Strength
Range:
18–50 lb
Designed for Convenience and Productivity
Designed for Comfort and Safety
• Easy, one-step tensioning and cut-off
of a wide range of cable ties
• Narrow-shaped nose rotates 360˚ for optimum
maneuverability in tight spaces
• Tension-adjustment wheel at nose enables easy
access and quick setting up to 50 lb
• For repetitive-tension applications, built-in locking
mechanism maintains constant tension setting —
even when tool is frequently put down and picked
up again
• Storage in handle keeps spare cutting blade
readily at hand
• Holds cut-off tails captive until ejected
by operator — no mess to clean up
• Wide cable-tie insertion gap speeds
installation — no fumbling to insert tie
• Two built-in hangers facilitate easy storage
of tool when not in use
• Nine-foot air hose included for fast connection
to your air supply
• Balanced, ergonomic design reduces user strain
and fatigue
• Soft, over-molded grip cushions user’s hand
• Over-sized trigger enables easy activation
• Impact-resistant polymer housing yields maximum
durability, minimum weight
• Cuts tail off flush — no sharp ends to injure
installers or damage cables
Tightens cable tie and
cuts flush in one step
360° rotating nose
for maximum flexibility
Narrow-shaped nose for easy
reach in tight spaces
Ty-Rap® Pneumatic
Cable Tie Installation
Tool
Ty-Rap® Pneumatic Cable Tie Installation Tool
Cat.
Number
ERG50P
Std. Pkg.
Qty.
Description
Pneumatic Cable Tie Installation Tool
for 18–50 lb. Ties (includes 9-ft. air hose)
1
UPC
Number
78620989207
The Ty-Rap® Cable Tie Installation Tool is Designed
for Use with All Ty-Rap® Cable Ties
Ty-Rap® Cable Ties
Industrial Strength for the Most Demanding Work!
• Infinitely adjustable design ensures the right fit
• 316 stainless steel locking device for The Grip of Steel® holding power
• Oval, low-profile head and smooth, molded body —
no notches to create stress points or snag during pulling
• Available in materials to suit a variety
of applications/environments
• UL and Military Listed
Ty-Rap® Natural Nylon 6.6 Cable Ties
Cat.
Number
TY23M
TYB2315M
TY232M
TY234M
TY24M
TY242M
TY26M
TY244M
TY25M
TY253M
TY28M
Body Width
(in.)
0.09
0.09
0.09
0.09
0.14
0.14
0.14
0.14
0.19
0.19
0.19
Atlantic Region
Thomas & Betts Limited
106 Chain Lake Drive, Unit 2C
Halifax, Nova Scotia B3S 1A8
Tel.: (902) 450-1307
Toll Free: 1-877-862-4357
Fax: (902) 450-1309
Length
(in.)
3.62
7.00
8.00
14.00
5.50
8.19
11.10
14.50
7.31
11.60
14.20
Max. Wire.
Bundle Dia (in.)
Tensile Strength
(lb)
Bulk Pkg.
Qty.
UPC
Number
0.63
1.50
2.00
4.00
1.13
2.00
3.00
4.00
1.75
3.00
4.00
18
18
18
18
40
40
30
30
50
50
50
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
78621082436
78621088355
78621083069
78621083070
78621082447
78621083071
78621082468
78621083072
78621082457
78621083990
78621082479
Quebec Region
Ontario Region
Western Region
Thomas & Betts Limited
7900 Taschereau Boulevard
Building D, Suite 108
Brossard, Quebec J4X 1C2
Tel.: (450) 466-1102
Toll Free: 1-800-465-1399
Fax: (450) 466-1163
Thomas & Betts Limited
2000 Argentia Road
Plaza 5, Suite 500
Mississauga, Ontario L5N 2R7
Tel.: (905) 858-1010
Toll Free: 1-877-291-7771
Fax: (905) 858-1080
Thomas & Betts Limited
6531-148th Street, #1
Surrey, British Columbia
V3S 3C5
Tel.: (604) 598-9811
Toll Free: 1-866-540-8220
Fax: (604) 598-9840
www.tnb-canada.com
©2009 Thomas & Betts Limited. All rights reserved. Printed in Canada 01/09/2500. Order No. TYRAPPNEU-E
Thomas & Betts Limited
4836 Eleniak Road
Edmonton, Alberta T6B 2S1
Tel.: (780) 424-7092
Toll Free: 1-888-664-5666
Fax: (780) 424-7093
Toll Free: 1-866-424-4082
Download PDF
Similar pages