STEREO HEADPHONES & ACCESSORIES “THE ULTIMATE” DIGITAL STEREO HEADPHONES The Philmore No. ATA-1035, our top-of-the-line model features samarium cobalt magnets and ultra thin polyester film diaphragm to produce the finest possible audio reproduction. The adjustable headband, soft ear cushion is designed for maximum wearing comfort. This headphone is supplied with 1/4” stereo adaptor to allow use with all personal or home stereo equipment • Frequency Range: 20-22,000 Hz • Impedance: 32 ohms • Sensitivity: 105db • Cord Length: 9 ft. STEREO HEADPHONE LUXURY MODEL BUILT-IN VOLUME CONTROLS STEREO/MONO SWITCH A luxury model for a Professional Listener: Volume controls on each phone permit the selective reproduction of sound levels to personal preference on both right and left channels. A mono switch is provided for TV, radio and musical instruments. Two moving coil driver transducers are used for speakers, producing a full range frequency response of 2020,000Hz power handling capacity of 0.5 watts. Impedance: 8 ohms. Sensitivity: 110 db at 1000Hz with 1mW. No. HD3030 MINI STEREO HEADPHONES STEREO HEADPHONES with EXTENSION CABLE This quality headphone is the perfect replacement for all personal stereo, cassette and CD players. The adjustable headband provides for comfortable use and is provided with an adaptor (1/4” to 3.5mm) to allow easy hook-up to regular stereo equipment. No. SP26 - 4 Ft. cord • Type: 27mm Mylar Speaker • Frequency Range: 20-18,000 Hz • Impedance: 32 ohms • Sensitivity: 96db S.P.I. at 1 KHz • Max. Input Power: 100mW No. SP26-10 - 10 Ft. cord No. 40-430 98 The perfect replacement cushions for ministereo headphones. Made of the same quality material as cushions supplied with standard headphones to take the extra wear and tear that mini-headphones are subject to. They slip over ear cups 1-3/4” diameter. 2 per package, in charcoal gray color. O.D. size of cushion is 1.90”. No. EP1 No. EP4 - Larger than No. EP1 (2.05” O.D.) Slip over ear cups 2-1/2” diameter REPLACEMENT FOAM EAR PADS Use for several types of mini headphones. Choose from selection below. No. ATA-1035 WITH EAR CUSHIONS for MINI STEREO HEADPHONES Stereo Mini Headphones with 10 ft. extension cable. (Blister Card Packing) No. EP2 - Charcoal Gray No. EP3 - Orange REPLACEMENT FOAM EAR PADS For ear buds (in-the-ear-style) type earphones. Fits Media Star earbuds (No.71-1834, No. 711836 & No. 71-1837) and others, including most earphones for MP3 player. Color is light Grey. No. EP5 - Package of 4 EARPHONE AND MICROPHONE ACCESSORIES FOR FRS, PERSONAL RADIOS EARPHONE/ MICROPHONE for Cobra FRS Radios (secret service style, black color) Specifically designed for use with FRS two way radios made by Cobra. Provides private listening via a single, monaural No. 70-233 - 47” cord earbud that will fit into either ear. The microphone may be clipped on to the users collar with a built - in clip and is activated by a Pushto-talk (PTT) switch on the microphone assembly. The radio could be worn on the users belt or hidden in a pocket; run the wire under a shirt or jacket to keep it out of the way (cord is long enough for a loop at the Microphone). This is a very convenient arrangement for hikers, fishermen, spies and other outdoorsmen; as well as for keeping in touch with each other at the mall, in the city etc. Standard 32 ohm impedance. UNIVERSAL MONAURAL EARBUD FOR FRS, GMRS, WALKMAN, TV etc.. Made to be used with just about any portable radio, some two - way radios and TV; use for private listening (also saves battery power). Compatible with Cobra FRS and Ham radio HT’s if they have a separate 3.5mm earphone jack. Use with a walkman or other portable stereo radio when listening to news, talk shows or other broadcasts. Comfortable No. 70-222 - 42” cord foam earpad, fits either ear. The 3.5 mm plug fits the earphone jack on almost any portable; 42” cord is plenty long to reach to a beltmounted radio or one stashed in pant’s pocket. Standard 32 ohm impedance, color Black.