QuickSpecs
HP 4510G Switch Series
Overview
Models
HP 4510-48G Switch
HP 4510-24G Switch
JF428A
JF847A
Key features
Enterprise-class security features
Wire-speed switching capacity up to 176 Gbps
Dual-personality copper/fiber ports
Single IP address management
IEEE 802.1X network access control
Product overview
The HP 4510G Switch Series provides advanced Gigabit Ethernet access and distribution for medium-sized businesses and smaller
enterprise organizations seeking to build a secure converged network. HP 4510G switches support security, and management
features, and accommodate up to four optional 10 GbE high-speed links, enabling connectivity to a core network or highperformance servers. The combination of high-performance Gigabit Ethernet switching, quality of service (QoS), and traffic
management features help ensure that essential applications receive appropriate priority for efficient utilization of network resources.
The series also offers single address management.
Features and benefits
Quality of Service (QoS)
Layer 4 prioritization:
prioritization enables prioritization based on TCP/UDP port numbers
Traffic prioritization (IEEE 802.1p): allows real-time traffic classification into eight priority levels mapped to eight queues
Class of Service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol,
TCP/UDP port number, source port, and DiffServ
Rate limiting:
limiting sets per-port ingress enforced maximums and per-port, per-queue guaranteed minimums
Bandwidth shaping:
shaping
Rate limiting: provides per-port, ingress-based enforced bandwidth maximums
Guaranteed minimums: provides per-port, per-queue egress-based guaranteed bandwidth minimums
Broadcast control:
control allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
Management
Remote configuration and management:
management is available through a secure Web browser or a command-line interface (CLI)
Manager and operator privilege levels:
levels enable read-only (operator) and read-write (manager) access on CLI and Web
browser management interfaces
Management VLAN:
VLAN segments traffic to and from management interfaces, including CLI/telnet, a Web browser interface, and
SNMP
RADIUS accounting support:
support separates RADIUS accounting server support per SSID; provides detailed session, usage, and
billing information for each client activity
Multiple configuration files:
files can be stored to the flash image
Dual flash images:
images provide independent primary and secondary operating system files for backup while upgrading
Secure Web GUI:
GUI provides a secure, easy-to-use graphical interface for configuring the module via HTTPS
Command-line interface (CLI): provides a secure, easy-to-use command-line interface for configuring the module via SSH or
DA - 13796
Worldwide — Version 4 — October 27, 2011
Page 1
QuickSpecs
HP 4510G Switch Series
Overview
a switch console; provides direct real-time session visibility
SNMPv1, v2c, and v3:
v3 facilitate centralized discovery, monitoring, and secure management of networking devices
Port mirroring:
mirroring enables traffic on a port to be simultaneously sent to a network analyzer for monitoring
3Com-heritage Comware Operating System:
System CLI and Web user interface in common with HP E4xxx and E55xxx series
switches
Connectivity
Auto-MDIX:
Auto-MDIX automatically adjusts for straight-through or crossover cables on all 10/100 and 10/100/1000 ports
Dual-personality functionality:
functionality includes four 10/100/1000 ports or SFP slots for optional fiber connectivity such as GigabitSX, -LX, and -LH, or 100-FX
IEEE 802.3af Power over Ethernet (PoE): provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices
such as IP phones, wireless access points, and security cameras
Optional 10 Gigabit Ethernet ports:
ports allow the addition of 10 Gigabit Ethernet connections for uplinks or high-bandwidth
server connections; flexibly supports XFP, SFP+, or CX4 local connections
Manageability
RMON (remote monitoring): provides advanced monitoring and reporting capabilities for statistics, history, alarms, and events
Dual flash images:
images provides independent primary and secondary operating system files for backup while upgrading
Full-featured console:
console provides complete control of the switch with a familiar command-line interface (CLI)
Web interface:
interface allows configuration of the switch from any Web browser on the network
Multiple configuration files:
files allow multiple configuration files to be stored to a flash image
Software updates:
updates free downloads from the Web
sFlow (RFC 3176): wire-speed traffic accounting and monitoring
IEEE 802.1AB Link Layer Discovery Protocol (LLDP): automated device discovery protocol provides easy mapping using
network management applications
Layer 2 switching
VLAN support and tagging:
tagging support IEEE 802.1Q with 4,094 simultaneous VLAN IDs
GARP VLAN Registration Protocol:
Protocol allows automatic learning and dynamic assignment of VLANs
IP multicast snooping and data-driven IGMP:
IGMP automatically prevents flooding of IP multicast traffic
Jumbo packet support:
support supports up to 9220-byte frame size to improve the performance of large data transfers
IEEE 802.1ad QinQ:
QinQ increases the scalability of an Ethernet network by providing a hierarchical structure; connects multiple
LANs on a high-speed campus or metro network
Layer 3 routing
Static IP routing:
routing provides manually configured routing; includes ECMP capability
Routing Information Protocol (RIP): provides RIPv1 and RIPv2 routing
Security
Access control lists (ACLs): provide IP Layer 3 filtering based on source/destination IP address/subnet and source/destination
TCP/UDP port number
RADIUS/TACACS+:
RADIUS/TACACS+ eases switch management security administration by using a password authentication server
Secure Shell:
Shell encrypts all transmitted data for secure remote CLI access over IP networks
Secure Web management with HTTPS and SSL:
SSL encrypts all HTTP traffic, allowing secure access to the browser-based
management GUI in the switch
IEEE 802.1X and RADIUS network logins:
logins control port-based access for authentication and accountability
Port security:
security allows access only to specified MAC addresses, which can be learned or specified by the administrator
MAC address lockout:
lockout prevents particular configured MAC addresses from connecting to the network
DA - 13796
Worldwide — Version 4 — October 27, 2011
Page 2
QuickSpecs
HP 4510G Switch Series
Overview
Secure FTP:
FTP allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized
copying of a switch configuration file
Switch management logon security:
security can require either RADIUS or TACACS+ authentication for secure switch CLI logon
Secure management access:
access securely encrypts all access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3
Custom banner:
banner displays security policy when users log in to the switch
Automatic VLAN assignment:
assignment automatically assigns users to the appropriate VLAN based on their identity and location and
the time of day
Management password:
password provides security so that only authorized access to the Web browser interface is allowed
STP BPDU port protection:
protection blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged
BPDU attacks
Dynamic IP lockdown:
lockdown works with DHCP protection to block traffic from unauthorized hosts, preventing IP source address
spoofing
DHCP protection:
protection blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
Dynamic ARP protection:
protection blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data
STP Root Guard:
Guard protects the root bridge from malicious attacks or configuration mistakes
Convergence
IEEE 802.1AB Link Layer Discovery Protocol (LLDP): is an automated device discovery protocol that provides easy mapping
of network management applications
Automated voice VLAN assignment:
assignment recognizes IP phones and automatically assigns voice traffic to a dedicated VLAN for IP
phones
Warranty and support
Lifetime warranty:
warranty for as long as you own the product with advance replacement and next-business-day delivery (available in
most countries)*
Electronic and telephone support:
support limited electronic and telephone support is available from HP; refer to:
www.hp.com/networking/warranty for details on the support provided and the period during which support is available
Software releases:
releases refer to: www.hp.com/networking/warranty for details on the software releases provided and the period
during which software releases are available for your product(s)
* Hardware warranties replacement for as long as you own the product, with next business day advance replacement (available in
most countries). The disk drive included with HP Alliance One Advanced Services and Services zl Modules, HP Threat Management
Services zl Module, HP AllianceOne Ext zl Mod w/Rvrbd Stlhd, HP E-MSM765zl Mobility Controller and HP Surv Brch Com zl Mod
pwrby Msft Lync has a five-year hardware warranty. For details, refer to the Software license and hardware warranty statements at:
www.hp.com/networking/warranty.
DA - 13796
Worldwide — Version 4 — October 27, 2011
Page 3
QuickSpecs
HP 4510G Switch Series
Technical Specifications
HP 4510-48G Switch (JF428A)
2 open module slots
Ports
44 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
4 SFP dual-personality 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASETX, IEEE 802.3ab Type 1000BASE-T)
16.54(d) x 17.32(w) x 1.72(h) in. (42.0 x 44.0 x 4.37 cm) (1U height)
Physical characteristics
Dimensions
11.02 lb. (5 kg)
Weight
Power PC @ 200 MHz, 16 MB flash, 128 MB SDRAM; packet buffer size: 4
Memory and processor
Processor
MB shared packet buffer
Performance
Reliability
Environment
Electrical characteristics
Safety
Emissions
Management
Services
1000 Mb Latency
10 Gbps Latency
Throughput
Switching capacity
MAC address table size
MTBF (years)
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Voltage
Maximum power rating
Notes
< 3.2 µs
< 2.6 µs
131 million pps
176 Gbps
16000 entries
14.9
32°F to 113°F (0°C to 45°C)
10% to 90%, noncondensing
-40°F to 158°F (-40°C to 70°C)
5% to 95%, noncondensing
100-240 VAC
120 W
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
IEC 60950-1; EN 60950; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55022; EN 55024;
ICES-003 Class A; EN 61000-3-2; EN 61000-3-3; EN 61000-4-2; EN 61000-4-3; EN 61000-4-4;
EN 61000-4-5; EN 61000-4-6
IMC - Intelligent Management Center; command-line interface; Web browser; out-of-band management
(serial RS-232C); SNMP Manager; Telnet
3-year, 4-hour onsite, 13x5 coverage for hardware (UV834E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV837E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (UV840E)
3-year, 24x7 SW phone support, software updates (UV843E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR668E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR669E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR670E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV835E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV838E)
DA - 13796
Worldwide — Version 4 — October 27, 2011
Page 4
QuickSpecs
HP 4510G Switch Series
Technical Specifications
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV841E)
4-year, 24x7 SW phone support, software updates (UV844E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV836E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV839E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV842E)
5-year, 24x7 SW phone support, software updates (UV845E)
3 Yr 6 hr Call-to-Repair Onsite (UW434E)
4 Yr 6 hr Call-to-Repair Onsite (UW435E)
5 Yr 6 hr Call-to-Repair Onsite (UW436E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR672E)
1-year, 24x7 software phone support, software updates (HR671E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS714E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS715E)
3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS716E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS717E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS718E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS719E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS720E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS721E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your
local HP sales office.
HP 4510-24G Switch (JF847A)
2 open module slots
Ports
20 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
4 SFP auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASETX, IEEE 802.3ab Type 1000BASE-T)
11.81(d) x 17.32(w) x 1.72(h) in. (30.0 x 44.0 x 4.37 cm) (1U height)
Physical characteristics
Dimensions
9.92 lb. (4.5 kg)
Weight
Power PC @ 200 MHz, 16 MB flash, 128 MB SDRAM; packet buffer size: 2
Memory and processor
Processor
MB shared packet buffer
< 3.2 µs
Performance
1000 Mb Latency
< 2.6 µs
10 Gbps Latency
93.2 million pps
Throughput
128 Gbps
Switching capacity
MAC address table size 16000 entries
23
Reliability
MTBF (years)
32°F to 113°F (0°C to 45°C)
Environment
Operating temperature
10% to 90%, noncondensing
Operating relative
humidity
DA - 13796
Worldwide — Version 4 — October 27, 2011
Page 5
QuickSpecs
HP 4510G Switch Series
Technical Specifications
Electrical characteristics
Safety
Emissions
Management
Services
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Voltage
Maximum power rating
Notes
-40°F to 158°F (-40°C to 70°C)
5% to 95%, noncondensing
100-240 VAC
80 W
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
IEC 60950-1; EN 60950; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55022; EN 55024;
ICES-003 Class A; EN 61000-3-2; EN 61000-3-3; EN 61000-4-2; EN 61000-4-3; EN 61000-4-4;
EN 61000-4-5; EN 61000-4-6
IMC - Intelligent Management Center; command-line interface; Web browser; out-of-band management
(serial RS-232C); SNMP Manager; Telnet
3-year, 4-hour onsite, 13x5 coverage for hardware (UX198E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UX201E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UX204E)
3-year, 24x7 SW phone support, software updates (UX207E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR663E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR664E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UX199E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UX202E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UX205E)
4-year, 24x7 SW phone support, software updates (UX208E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UX200E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UX203E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UX206E)
5-year, 24x7 SW phone support, software updates (UX209E)
3 Yr 6 hr Call-to-Repair Onsite (UX210E)
4 Yr 6 hr Call-to-Repair Onsite (UX211E)
5 Yr 6 hr Call-to-Repair Onsite (UX212E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR667E)
1-year, 24x7 software phone support, software updates (HR666E)
1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support and software updates
(HR665E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS730E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS731E)
3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS732E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS733E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS734E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS735E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS735E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS737E)
DA - 13796
Worldwide — Version 4 — October 27, 2011
Page 6
QuickSpecs
HP 4510G Switch Series
Technical Specifications
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your
local HP sales office.
Standards and protocols
(applies to all products in
series)
General protocols
IEEE 802.1ag Service Layer OAM
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q (GVRP)
IEEE 802.1s Multiple Spanning Trees
IEEE 802.1v VLAN classification by Protocol and
Port
IEEE 802.1w Rapid Reconfiguration of Spanning
Tree
IEEE 802.1X PAE
IEEE 802.3ad Link Aggregation (LAG)
IEEE 802.3ae 10-Gigabit Ethernet
IEEE 802.3x Flow Control
RFC 768 UDP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 TELNET
RFC 925 Multi-LAN Address Resolution
RFC 951 BOOTP
RFC 1058 RIPv1
RFC 1350 TFTP Protocol (revision 2)
RFC 1519 CIDR
RFC 1542 Clarifications and Extensions for the
Bootstrap Protocol
RFC 2131 DHCP
RFC 2453 RIPv2
RFC 3046 DHCP Relay Agent Information Option
RFC 3576 Ext to RADIUS (CoA only)
RFC 4675 RADIUS VLAN & Priority
IPv6
RFC 2080 RIPng for IPv6
RFC 2460 IPv6 Specification
RFC 2710 Multicast Listener Discovery (MLD) for
IPv6
RFC 2740 OSPFv3 for IPv6
RFC 2925 Definitions of Managed Objects for
Remote Ping, Traceroute, and Lookup Operations
(Ping only)
RFC 3019 MLDv1 MIB
RFC 3162 RADIUS and IPv6
RFC 3315 DHCPv6 (client and relay)
RFC 3513 IPv6 Addressing Architecture
RFC 3810 MLDv2 (host joins only)
RFC 4022 MIB for TCP
RFC 4251 SSHv6 Architecture
DA - 13796
MIBs
IEEE 8021-PAE-MIB
IEEE 8023-LAG-MIB
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 1724 RIPv2 MIB
RFC 2011 SNMPv2 MIB for IP
RFC 2013 SNMPv2 MIB for UDP
RFC 2233 Interface MIB
RFC 2452 IPV6-TCP-MIB
RFC 2454 IPV6-UDP-MIB
RFC 2465 IPv6 MIB
RFC 2466 ICMPv6 MIB
RFC 2571 SNMP Framework MIB
RFC 2572 SNMP-MPD MIB
RFC 2573 SNMP-Notification MIB
RFC 2573 SNMP-Target MIB
RFC 2665 Ethernet-Like-MIB
RFC 2819 RMON MIB
RFC 2925 Ping MIB
RFC 3414 SNMP-User based-SM MIB
RFC 3415 SNMP-View based-ACM MIB
RFC 3418 MIB for SNMPv3
RFC 3826 AES for SNMP's USM MIB
RFC 4133 Entity MIB (Version 3)
LLDP-EXT-DOT1-MIB
LLDP-EXT-DOT3-MIB
LLDP-MIB
Network management
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
RFC 2819 Four groups of RMON: 1 (statistics), 2
(history), 3 (alarm) and 9 (events)
RFC 3176 sFlow
ANSI/TIA-1057 LLDP Media Endpoint Discovery
(LLDP-MED)
SNMPv1/v2c/v3
Security
IEEE 802.1X Port Based Network Access Control
RFC 1492 TACACS+
RFC 2865 RADIUS Authentication
RFC 2866 RADIUS Accounting
Secure Sockets Layer (SSL)
SSHv2 Secure Shell
Worldwide — Version 4 — October 27, 2011
Page 7
QuickSpecs
HP 4510G Switch Series
Technical Specifications
RFC 4252 SSHv6 Authentication
RFC 4253 SSHv6 Transport Layer
RFC 4254 SSHv6 Connection
RFC 4293 MIB for IP
RFC 4419 Key Exchange for SSH
RFC 4443 ICMPv6
RFC 4541 IGMP & MLD Snooping Switch
RFC 4861 IPv6 Neighbor Discovery
RFC 4862 IPv6 Stateless Address Autoconfiguration
DA - 13796
Worldwide — Version 4 — October 27, 2011
Page 8
QuickSpecs
HP 4510G Switch Series
Accessories
HP 4510G Switch Series Modules
accessories
HP 4500/4800 1-port 10GbE XFP Module
HP 4500/4800 2-port 10GbE XFP Module
HP 5500/5120 2-port 10GbE SFP+ Module
HP 4500/4800 2-port 10GbE LCM Module
HP 5500 2-port 10GbE Local Connect Module
Transceivers
HP X110 100M SFP LC FX Dual Mode Transceiver
HP X110 100M SFP LC LX Dual Mode Transceiver
HP X125 1G SFP RJ45 T Transceiver
HP X124 1G SFP LC SX Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X130 SC LR XFP Transceiver
HP X130 LC SR XFP Transceiver
HP X135 LC ER XFP Transceiver
HP X130 CX4 XFP Transceiver
HP X130 SFP+ LC SR Transceiver
HP X130 SFP+ LC LRM Transceiver
HP X130 SFP+ LC LR Transceiver
HP X240 SFP+ SFP+ 0.65 m Direct Attach Cable
HP X240 SFP+ SFP+ 1.2 m Direct Attach Cable
HP X240 SFP+ SFP+ 3 m Direct Attach Cable
Cables
HP 50 cm CX4 Cable
HP 100 cm CX4 Cable
HP 300 cm CX4 Cable
HP 0.5 m Multimode OM3 LC/LC Optical Cable
HP 1 m Multimode OM3 LC/LC Optical Cable
HP 2 m Multimode OM3 LC/LC Optical Cable
HP 5 m Multimode OM3 LC/LC Optical Cable
HP 15 m Multimode OM3 LC/LC Optical Cable
HP 30 m Multimode OM3 LC/LC Optical Cable
HP 50 m Multimode OM3 LC/LC Optical Cable
HP X230 Local Connect 50cm CX4 Cable
HP X230 Local Connect 100cm CX4 Cable
HP X230 CX4 to CX4 3m Cable
HP 4510-48G Switch (JF428A)
NEW HP 1 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 2 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 5 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 15 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 30 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 50 m PremierFlex OM3+ LC/LC Optical Cable
BK838A
BK839A
BK840A
BK841A
BK842A
BK843A
DA - 13796
Page 9
Worldwide — Version 4 — October 27, 2011
JE053A
JE049A
JD368B
JE051A
JD360B
JD497A
JD498A
JD089B
JD493A
JD063B
JD108B
JD117B
JD121A
JD506A
JD092B
JD093B
JD094B
JD095B
JD096B
JD097B
JE054A
JE055A
JE056A
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
JD363B
JD364B
JD365A
QuickSpecs
HP 4510G Switch Series
Accessory Product Details
NOTE: Details are not available for all accessories. The following specifications were available at the time of publication.
HP 4500/4800 1-port
10GbE XFP Module
(JE053A)
Ports
Services
1 XFP 10-GbE port; Duplex: full only
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 4500/4800 2-port
10GbE XFP Module
(JE049A)
Ports
Services
2 XFP 10-GbE ports; Duplex: full only
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 4500/4800 2-port
10GbE LCM Module
(JE051A)
Ports
Services
2 CX4 10-GbE ports; Duplex: full only
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP X110 100M SFP LC
FX Dual Mode
Transceiver(JD497A)
Transceiver
Ports
Connectivity
1 LC 100 Mbps port
Connector type
Wavelength
Dimensions
Physical characteristics
A small form-factor
pluggable (SFP) 100 MB/s
Dual mode transceiver that
provides a full duplex
Electrical characteristics
100Mb/s solution up to
2km on a multi mode
fiber.
Cabling
Services
DA - 13796
LC
1310 nm
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
1.17 cm)
Full configuration weight 0.04 lb. (0.02 kg)
Power consumption
0.8 W
typical
1.0 W
Power consumption
maximum
2km
Cable length
Multi Mode
Fiber type
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
Worldwide — Version 4 — October 27, 2011
Page 10
QuickSpecs
HP 4510G Switch Series
Accessory Product Details
HP X110 100M SFP LC Ports
LX10 Transceiver(JD498A)
Transceiver
Connectivity
A small form-factor
pluggable (SFP) 100Mb/s Physical characteristics
transceiver that provides a
full duplex 100Mb/s
solution for up to 10km on Electrical characteristics
a single mode cable.
Cabling
HP X125 1G SFP RJ45 T Ports
Transceiver (JD089B)
Connectivity
Physical characteristics
A small form factor
pluggable (SFP) Gigabit
1000Base-T transceiver
that provides a full duplex Electrical characteristics
Gigabit solution up to
100m on a Cat-5+ cable.
Services
DA - 13796
LC
1310 nm
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
1.17 cm)
Full configuration weight 0.04 lb. (0.02 kg)
Power consumption
0.8 W
typical
1.0 W
Power consumption
maximum
10km
Cable length
Fiber type
Single Mode
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
Services
Cabling
1 LC 100 Mbps port
Connector type
Wavelength
Dimensions
1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T)
RJ-45
Connector type
2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x
Dimensions
1.4 cm)
Full configuration weight 0.07 lb. (0.03 kg)
0.8 W
Power consumption
typical
1.0 W
Power consumption
maximum
Cable type:
1000BASE-T: Category 5 (5E or better recommended), 100 Ù differential 4pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced,
complying with IEEE 802.3ab 1000BASE-T;
Maximum distance:
• 100m
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
Worldwide — Version 4 — October 27, 2011
Page 11
QuickSpecs
HP 4510G Switch Series
Accessory Product Details
HP X124 1G SFP LC SX
Transceiver (JD493A)
Ports
Connectivity
JD493A HP X124 1G SFP
Physical characteristics
LC SX Transceiver that
provides a full duplex
Gigabit solution up to
550m on Multi Mode
Electrical characteristics
fiber.
Cabling
Services
HP X125 1G SFP LC
LH70 Transceiver
(JD063B)
Ports
Connectivity
A small form-factor
pluggable (SFP) Gigabit
LH70 transceiver that
provides a full-duplex
Gigabit solution up to
70km on a single-mode
fiber.
Physical characteristics
Electrical characteristics
Cabling
Services
DA - 13796
1 LC 1000BASE-SX port
Connector type
Wavelength
Dimensions
LC
850 nm
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
1.17 cm)
Full configuration weight 0.04 lb. (0.02 kg)
Power consumption
0.8 W
typical
1.0 W
Power consumption
maximum
Maximum distance:
• 220m-550m
Fiber type
Multi Mode
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)
LC
Connector type
1550 nm
Wavelength
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
Dimensions
1.17 cm)
Full configuration weight 0.04 lb. (0.02 kg)
0.8 W
Power consumption
typical
1.0 W
Power consumption
maximum
Cable type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
• 70km
Fiber type
Single Mode
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
Worldwide — Version 4 — October 27, 2011
Page 12
QuickSpecs
HP 4510G Switch Series
Accessory Product Details
HP X130 10G XFP CX4
Transceiver (JD506A)
An XFP 10 Gigabit CX4
transceiver that provides
full duplex 10G solution
using CX4 cabling.
HP 0.5 m Multimode
OM3 LC/LC Optical
Cable (AJ833A)
Ports
Connectivity
Cabling
Services
1 CX4 10-GbE port; Duplex: full only
CX4
Connector type
15m Max CX4 cables
Cable length
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
Cabling
Cable type:
type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Notes
Services
DA - 13796
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical glass: Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical glass: Bandwidth: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: 600 / 600 meters
@850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber and designed to work in both the 850 and
1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Worldwide — Version 4 — October 27, 2011
Page 13
QuickSpecs
HP 4510G Switch Series
Accessory Product Details
HP 1 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ834A)
Cable type:
type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Notes
Services
DA - 13796
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the 850
and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Worldwide — Version 4 — October 27, 2011
Page 14
QuickSpecs
HP 4510G Switch Series
Accessory Product Details
HP 2 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ835A)
Cable type:
type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Notes
Services
DA - 13796
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the 850
and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Worldwide — Version 4 — October 27, 2011
Page 15
QuickSpecs
HP 4510G Switch Series
Accessory Product Details
HP 5 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ836A)
Cable type:
type
50/125 µm core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: This specification defines the detail requirements for a tight
buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable
and Ethernet assembly with LC duplex connectors on one end and LC duplex
connectors on other end.
Notes
Services
DA - 13796
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the 850
and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Worldwide — Version 4 — October 27, 2011
Page 16
QuickSpecs
HP 4510G Switch Series
Accessory Product Details
HP 15 m Multimode
OM3 LC/LC Optical
Cable (AJ837A)
Cabling
Cable type:
type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Notes
Services
DA - 13796
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the 850
and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Worldwide — Version 4 — October 27, 2011
Page 17
QuickSpecs
HP 4510G Switch Series
Accessory Product Details
HP 30 m Multimode
OM3 LC/LC Optical
Cable (AJ838A)
Cabling
Cable type:
type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Notes
Services
DA - 13796
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the 850
and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Worldwide — Version 4 — October 27, 2011
Page 18
QuickSpecs
HP 4510G Switch Series
Accessory Product Details
HP 50 m Multimode
OM3 LC/LC Optical
Cable (AJ839A)
Cabling
Cable type:
type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Notes
Services
DA - 13796
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the 850
and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Worldwide — Version 4 — October 27, 2011
Page 19
QuickSpecs
HP 4510G Switch Series
Accessory Product Details
HP 1 m PremierFlex
OM3+ LC/LC Optical
Cable (BK838A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
Services
HP 2 m PremierFlex
OM3+ LC/LC Optical
Cable (BK839A)
Notes
• Core Diameter: 50um ±3um, Cladding diameter: 125um ±2um;
Coating diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a
longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
Services
DA - 13796
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a
longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Worldwide — Version 4 — October 27, 2011
Page 20
QuickSpecs
HP 4510G Switch Series
Accessory Product Details
HP 5 m PremierFlex
OM3+ LC/LC Optical
Cable (BK840A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
Services
HP 15 m PremierFlex
OM3+ LC/LC Optical
Cable (BK841A)
Notes
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a
longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
Services
DA - 13796
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a
longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Worldwide — Version 4 — October 27, 2011
Page 21
QuickSpecs
HP 4510G Switch Series
Accessory Product Details
HP 30 m PremierFlex
OM3+ LC/LC Optical
Cable (BK842A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
Services
HP 50 m PremierFlex
OM3+ LC/LC Optical
Cable (BK843A)
Notes
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a
longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
Services
DA - 13796
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a
longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Worldwide — Version 4 — October 27, 2011
Page 22
QuickSpecs
HP 4510G Switch Series
Accessory Product Details
To learn more, visit: www.hp.com/networking
© Copyright 2011 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without
notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
DA - 13796
Worldwide — Version 4 — October 27, 2011
Page 23
Download PDF
Similar pages