Item # Fluke-360, Leakage Current Clamp Meter Leakage Current

Weschler Instruments
16900 Foltz Parkway, Cleveland OH, 44149
Phone: 440.238.2550 • Fax: 440.238.0660
E-Mail: sales@weschler.com • Web site: www.weschler.com
Item # Fluke-360, Leakage Current Clamp Meter
Leakage Current Clamp Meter
• Measure leakage current with 1 µA resolution, for monitoring of insulation erosion
• Measure to 60 A, for general installation needs
• Perform tests without powering down the installation or disconnecting equipment
• Advanced shielding ensures accurate results when measuring near other conductors
• Easy-to-carry, pocket-sized clamp with 40 mm (1.5") jaw size
• Handy “Display-Hold” button for capturing readings in hard-to-reach places
• Auto power-off, with warning buzzer, saves battery life
• Meets safety standard VDE0404-4 and VDE0702 for leakage current and differential current measurement of electrical
appliances
SPECIFICATIONS
Ranges
Resolution
3 ma, 30 mA, 30 A, 60 A
0.001 mA, 0.01 mA, 0.01 A, 0.1 A
Accuracy
± 1% rdg ± 5d (≤ 50 A)
Accuracy (50/60 Hz)
± 5% rdg ± 5d (>50 A)
Frequency Range
15-150 Hz
Maximum Current
60 A rms
Digital Display
3200 count LCD
Bargraph Display
32 segment LCD
Measurement Cycle
Range Switching
Environment
2/sec. (digital display), 12 /sec. (bargraph display)
Auto-range
0-50°C,
Temperature Coefficient
Influence of External Magnetic Field
0.0005 % typical (on current value of adjacent cable)
3/31/2018 | Page 1 of 2
Influence of Conductor Position
Circuit Voltage
Safety Standard
Battery Type
Battery Life
Max. Conductor Diameter
Dimensions
Within accuracy
≤300 Vrms
EN 61010-1, EN 61010-2-032. 300 V CAT II, Pollution Degree 2
3 V Lithium battery (CR2032)
Approx. 90 hours (continuous use)
1.57 in
40 mm
6.9 x 2.8 x 1 in
176 x 70 x 25 mm
3/31/2018 | Page 2 of 2
Download PDF
Similar pages