XPress-Pro SW Series Hardened
Ethernet Switches
Enabling Communication for the Demanding
Industrial Environment
Part of the DeviceLinx™ family of network-
Combined with our industrial device servers,
enablement products, XPress-Pro™ SW series
this complete line of rugged, dependable and
managed and unmanaged Ethernet switches are
affordable switches delivers a robust industrial
designed to give you performance you can count
device networking solution.
on in harsh industrial environments.
Whether they’re on the factory floor or in the
field, XPress-Pro switches will provide flawless
communication when you need it most.
DEVICE NETWORKING
Programmable
Logic Control
Alarm
SE
100BA
Din Rail 24VDC
Redundant power
supply
PWR1
PWR2
AC
XPress-Pro SW
94000
SE
00BA
10/1
SCADA
PWR1
AC
XPress-Pro SW
94000
PWR2
E
0BAS
10/10
0BASE
10/10
Workstations
Auto Packing
Machine
Conveyor Belt
Server
Workstation
10/100BASE Copper
100BASE
100BASE Fiber
RSTP
Backup
Path
XPress-Pro 8-port models feature redundant power inputs
and a relay for power failure alarms.
XPress-Pro Industrial
Ethernet Switches are DIN-rail
mountable and offer:
Compliant with IEC61000-6-2 EMC generic immunity standard
for the industrial environment
Full wire-speed forwarding rate
Alarms for power failure by relay output (8-port only)
Fiberoptic interfaces
XPress-Pro SW Series Hardened Ethernet Switches
If the PWR1 fails, the Power
Alarm will be Activated, and
PWR2 will backup automatically.
XPress-Pro SW 94000 Series
The XPress-Pro SW 94000 is a managed Ethernet switch, allowing the user to log in and create virtual LANs,
configure ports, mirror ports and more. SW 94000 switches deliver the flexibility of eight 10/100 Ethernet
ports with an optional fiberoptic interface. XPress-Pro SW 94000 switches can be DIN-rail, shelf or wall
mounted, and come with dual redundant power inputs via a terminal block.
4K MAC addresses
256 KB buffer memory
Redundant 2A max, 10 to 30 VDC power inputs
-34° to 74° C (-29° to 165° F) operating temperature range
Hardened aluminum case
Supports DIN-rail, panel, or rack-mounting installation
Complies with NEMA TS1 and TS2 environmental requirements
for traffic control equipment
IEEE802.1w RSTP and IEEE802.1D STP compatible
XPress-Pro SW 94000 Series
IP multicast filtering through IGMP snooping
Supports port-based VLAN and IEEE802.1Q VLAN tagging and GVRP
IEEE802.1p QOS classification based on port-based priority, VLAN priority
field in VLAN-tagged frame, DS/TOS field in IP packet, UDP/TCP logical ports
8-port-based trunking groups with up to 8 ports per group
Rate control
Packet filtering and port security: destination MAC and static MAC address
are not subject to aging; secure mode freezes MAC address learning
Port mirroring
Alarms for power failure by relay output
UL 1604: Class 1, Division 2 classified for use in hazardous locations
> 94000 Diagram
XPress-Pro SW 92000 Series
XPress-Pro SW 92000 switches offer eight 10/100 Ethernet ports and an optional fiberoptic interface.
They can be DIN-rail, shelf or wall mounted, and come with dual redundant power inputs to fit applications
requiring a tough, environmentally hardened Ethernet switch.
2048 MAC addresses
768 kilobit buffer memory
Redundant 2A max, 10 to 48 VDC power inputs
-34° to 74° C (-29° to 165° F) operating temperature range
Hardened aluminum case
Supports DIN-rail, panel, or rack-mounting installation
Comply with NEMA TS1 and TS2 environmental requirements
for traffic control equipment
Alarms for power and port link failure by relay output
> 92000 Diagram
XPress-Pro SW 92000 Series
UL 1604: Class 1, Division 2 classified for use in
hazardous locations
XPress-Pro SW 52000 Series
The XPress-Pro SW 52000 compact, fast Ethernet switches are equipped with 5-port 10/100Base-TX or 4-port
10/100Base-TX plus a fiberoptic interface. By using standard auto-negotiation and the inclusion of auto-MDIX,
Lantronix delivers a cost-effective way of integrating legacy 10 Mbps networks with 100 Mbps fast Ethernet
networks.
SW 52000 TX ports auto-negotiate for 10/100 Mbps speed and auto detect full or half-duplex mode.
The fiber port on the SW 52012F accommodates multimode SC with a fiberoptic connection between two nodes
that can reach up to two kilometers. SW 52000 series switches can be DIN-rail mounted and are equipped with
terminal block power input to accommodate just about any application that requires an Ethernet switch.
2048 MAC addresses
384 kilobit buffer memory
.1A max, 12 to 48 VDC power input
-10° to 60° C (14° to 140° F) operating temperature range
XPress-Pro SW 52000 Series
Industrial plastic case supports DIN-rail mounting
> 52000 Diagram
XPress-Pro SW Model:
Designation
Typical Distance
Nominal Wavelength
Cable Type
Connector
Optical Budget
Serial Interface
Forward and Filtering Rate
Address Table Size
Latency
Reverse Polarity Protection
Network Interface
LED Indicators
Management
Alarm Contact
Standards
Power
Environmental
Protocols Supported
Packet Buffer Memory
Packaging
Dimensions:
Weight:
Processing Types
52000
92000
94000
100Base-FX
2 Km
1310 nm
62.5/125 mm
SC
15 dB
5-port 10/100Base-TX or 4-port 10/100Base-TX
plus 1-port 100Base-FX
14,880 pps for 10 Mbps
148,810 pps for 100 Mbps
2048 MAC addresses
Less than 5.1 µs
n/a
10/100 Mbps full/half-duplex, auto negotiation,
auto MDI/MDIX
Per Unit: Power Status
Per Port:10/100TX,100FX:Link/Activity (Green),Speed (Yellow)
n/a
8-port 10/100Base-TX
148,810 pps for 100 Mbps
14,880 pps for 10 Mbps
2048 MAC addresses
Less than 7.1 µs
n/a
10/100 Mbps full/half-duplex, auto negotiation,
auto MDI/MDIX
Per Unit: Power Status (Power 1, Power 2)
Per Port:10/100TX,100FX:Link/Activity (Green),
Speed (Yellow),Fault (Red)
n/a
8-port 10/100Base-TX, plus 1-port
100Base-FX (optional)
14,880 pps for 10 Mbps
148,810 pps for 100 Mbps
4K MAC addresses
Less than 9.6 µs
Yes
10/100 Mbps full/half-duplex, auto negotiation,
auto MDI/MDIX
Per Unit: Power Status (Power 1, Power 2)
Per Port:10/100TX,100FX:Link/Activity (Green),Speed (Yellow)
RS-232 console,Telnet, SNMP V1 & V2, RMON,
Web browser,TFTP
n/a
One relay output with current 1A @ 24 VDC
One relay output with current 1A @ 24 VDC
IEEE802.3 10Base-T,IEEE802.3u 100 Base-TX/100Base-FX,IEEE802.3x IEEE802.3 10Base-T,IEEE802.3u 100 Base-TX/100Base-FX,IEEE802.3x IEEE802.3 10Base-T,IEEE802.3u 100 Base-TX/100Base-FX
IEEE802.3x,IEEE802.1Q,IEEE802.1p,IEEE802.1w
Input Voltage: 12 to 48 VDC
Input Voltage: 10 to 48 VDC
Input Voltage: 10 to 30 VDC
Input Current: 0.1A max.
Input Current: 1.5A max.
Input Current: 2A max.
Power Consumption: 2.4W max.
Power Consumption: 24 VDC @ 0.55A, 18.48 W max.
Power Consumption: 24 VDC @ 0.77A, 18.48 W max.
Operating Temperature: -10° to 60° ° C (-14° to 140° F)
Operating Temperature: -34° to 74° ° C (-29° to 165° F)
Operating Temperature: -34° to 74° ° C (-29° to 165° F)
Storage Temperature:-25° to 85° C (-13° to 185° F)
Storage Temperature:-40° to 85° C (-40° to 185° F)
Storage Temperature: -40° to 85° C (-40° to 185° F)
Humidity: 10% to 90% relative humidity (non-condensing)
Humidity: 10% to 95% relative humidity (non-condensing)
Humidity: 10% to 95% relative humidity (non-condensing)
n/a
n/a
IGMP, GVRP, SNMP V1/V2, RMON,TFTP
384 kilobit
768 kilobit
256 KB
Plastic case with DIN-rail mounting
Aluminum case with DIN-rail, or panel mounting
Aluminum case with DIN-rail, panel or rack mounting
25 mm W x 70 mm D x 110 mm H
50 mm W x 110 mm D x 136 mm H
50 mm W x 125 mm D x 135 mm H
(0.99" W x 2.76" D x 4.33" H)
(1.97" W x 4.33" D x 5.35" H)
(1.97" W x 4.92" D x 5.31" H)
0.2 Kg (0.44 lbs.)
0.8 Kg (1.76 lb)
0.8 Kg (1.76 lb)
Store-and-forward
Half-duplex back-pressure and IEEE802.3x full-duplex flow control
Standards
IEEE802.3 10Base-T, IEEE802.3u 100 Base-TX/100Base-FX, IEEE802.3x
Regulatory Approvals:
Emission Compliance
ISO
Safety
UL 60950
CE Approval
ESD Standards (IEC 61000-4-2)
Radiated FRI Standards (IEC 61000-4-3)
Burst Standards (IEC 61000-4-4)
Surge Standards (IEC 61000-4-5)
n/a
n/a
n/a
n/a
n/a
Induced RFI Standards (IEC 61000-4-6)
n/a
FCC Part 15, Class A
Magnetic Field Standards (IEC 61000-4-8) n/a
Voltage Dip Standards (IEC 61000-4-11) n/a
Environmental Test Compliance
n/a
NEMA TS1/2 Environ.Requirements n/a
for Traffic Control Equipment
Installation Type:
DIN Rail (mounting kit is included)
Manufactured in an ISO9001 facility
UL 60950, EN 60950, IEC 60950, IEC 61000-6-2, UL 1604: Classified for ITE Equipment for use in hazardous locations:
Class 1, Division 2 group A, B, C & D:Temp Code T4A; -25C° < Tamb < 74C°
EN55022 (CISPR22 Class A), EN55024 (CISPR24 Class A)
Enclosure Contact: + / - 4 KV; Criteria B, Enclosure Air: + / - 8 KV; Criteria B
Enclosure Ports:10 V/m,80 to 1000 MHz;Criteria A
Enclosure Ports: + / - 4 KV @ 2.5 KHz; Criteria B, DC Power Ports: + / - 4 KV; Criteria B, AC Power Ports: + / - 4 KV; Criteria B
Signal Ports: + / - 1 KV; Line-to-earth; Criteria B, DC Power Ports: + / - 0.5 KV; Line-to-earth; Criteria B
AC Power Ports: + / - 2 KV; Line-to-earth; Criteria B
Signal Ports: 10V @ 0.15 - 80 MHz; Criteria A, DC Power Ports: 10V @ 0.15 - 80 MHz; Criteria A
AC Power Ports: 10V @ 0.15 - 80 MHz; Criteria A, Earth Ground Ports: 10V @ 0.15 - 80 MHz; Criteria A
Enclosure Ports: 30 A/m @ 50, 60 Hz; Criteria A
AC Power Ports: 30% Reduction for 0.5 period; Criteria B
(IEC 60068-2-6) Vibration Resistance: 5G @ 150 Hz; Criterion 3 (Operation/Storage/Transport)
(IEC 60068-2-27) Shock:
• 5 G @ 11 ms (Half-Sine Shock Pulse; Operation)
• 50 G @ 11 ms (Half-Sine Shock Pulse; Storage/Transport)
(IEC 60068-2-32) Free Fall: 1 M (3.281 ft.)
Yes
DIN Rail (mounting kit is included)
Optional wall-mount kit, ordered separately (X9294PMKT-01)
DIN Rail (mounting kit is included)
Optional wall-mount or rack-mount kit,ordered separately
(X9294DRKT-01), (X9294PMKT-01)
XPress-Pro Industrial Power Supply
Product Description:
30W / 1.5A DIN-rail 24 VDC industrial power supply
Input:
85 to 264 VAC (47 to 63 Hz) or 120 to 370 VDC
Output:
36W, 24 VDC, 0 to 1.5A
Overvoltage Protection:
27.6 to 32.4 Volts
Overload Protection:
105 to 160% rated output power
Protection Type:
Constant current limiting, recovers automatically
Inrush Current:
15A/115 VAC or 30A/230 VAC
Environmental:
Operating Temperature: -20° to 60° C (-4° to 140° F)
Storage Temperature: -40° to 85° C (-40° to 185° F)
Working Humidity: 10% to 95% non-condensing
Storage Humidity: 20% to 90% non-condensing
Dimensions:
78 mm W x 56 mm D x 93 mm H ( 3.17" W x 2.2" D x 3.66" H)
Regulatory Approvals:
Safety: UL60950-1, TUV EN60950-1 approved, design refer to EN50178
EMI conduction & radiation: EN55011, EN55022 (CISPR22) Class B
EMS immunity: EN61000-4-2, 3, 4, 5, 6, 8, 11, ENV50204, EN55024,EN61000-6-2, EN61204-3 heavy industry level, criteria A
Ordering Information
Part Number
Description
X52000001-01
X52012011-01
X92000001-01
X92012011-01
X94000001-01
X94012011-01
X3024DR00-01
XPress-Pro SW 52000; Industrial -10 -60°C 5-Port 10/100TX Ethernet Switch with DIN Rail
XPress-Pro SW 52012F; Industrial -10 -60°C 4-Port 10/100TX, 1-Port 100BaseFX MM SC Connector Ethernet Switch with DIN Rail
XPress-Pro SW 92000; hardened -34-74°C 8-Port 10/100TX Ethernet Switch with DIN Rail
XPress-Pro SW 92012F; hardened -34-74°C 8-Port 10/100TX, 1-Port 100BaseFX MM SC Connector Ethernet Switch with DIN Rail
XPress-Pro SW 94000; hardened manageable -34-74°C 8-Port 10/100TX Ethernet Switch with DIN Rail
XPress-Pro SW 94012F; hardened manageable -34-74°C 8-Port 10/100TX, 1-Port 100BaseFX MM SC Connector Ethernet Switch with DIN Rail
30 Watts 24VDC output, hardened DIN Rail power supply
Accessories:
X9294DRKT-01
X9294PMKT-01
15353 Barranca Parkway
19" Rack Mount Kit for 94000 series
Wall Mount Kit for 92000, 94000 series
|
Irvine
|
CA 92618
|
USA
|
Tel: 800.422.7055
|
Fax: 949.450.7232
|
www.lantronix.com
©2007, Lantronix, Inc. Lantronix is a registered trademark and XPress-Pro and DeviceLinx are trademarks of Lantronix, Inc. All other trademarks are the property of their respective owners.
Specifications subject to change without notice. All rights reserved.
910-524 01/08 PDF
Download PDF
Similar pages