HP ProLiant ML110 Generation 6

QuickSpecs
HP ProLiant ML110 Generation 6
Overview
Front View:
1.
DVD-ROM Drive
2.
Power LED
3.
Drive Activity LED
4.
Front Bezel
5.
SAS Cable (SAS model only)
6.
CPU Heatsink
7.
Hard Drive Controller Card (Optional)
8.
System Fan
9.
System Board
10. 300W Power Supply
Rear View:
1. Kensington lock notch
2. Cable lock provision notch
3. Access panel thumbscrew
4. Expansion slot cover retainer thumb screw
5. Expansion slot cover
6. Expansion slot 1
7. Expansion slot 2
8.. Expansion slot 3
9. Expansion slot 4
10. Management NIC port (RJ-45)
11. Video port
12. Serial port
13. USB ports
14. Embedded NIC port (RJ-45)
15. PS/2 keyboard port
16. PS/2 mouse port
17. Power supply cable socket
What's New
Support for Intel® i3-550 FIO Processor Kit and Intel® Xeon® X3470 FIO Processor Kit
Support for 2TB non hot-plug SATA drive
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
Page 1
QuickSpecs
HP ProLiant ML110 Generation 6
Standard Features
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration
Information - Factory Integrated Models" section.
Processor
Quad-Core Processors
One of the following
Intel® Xeon® processor X3470 (2.93GHz, 95W, 8MB, 1333, HT, Turbo 1/1/4/5)
depending on Model
NOTE: Available through Configure To Order only. See Factory Integration Models section for
more details.
Intel® Xeon® processor X3460 (2.80GHz, 95W, 8MB, 1333, HT, Turbo 1/1/4/5)
NOTE: Available through Configure To Order only. See Factory Integration Models section for
more details.
Intel® Xeon® processor X3450 (2.66GHz, 95W, 8MB, 1333, HT, Turbo 1/1/4/4)
Intel® Xeon® processor X3440 (2.53GHz, 95W, 8MB, 1333, HT, Turbo 1/1/2/3)
NOTE: Available through Configure To Order only. See Factory Integration Models section for
more details.
Intel® Xeon® processor X3430 (2.40GHz, 95W, 8MB, 1333, Turbo 1/1/2/3)
Dual-Core Processors
Intel® Core™ processor i3-550 (3.20GHz, 73W, 4MB, 1333, HT)
NOTE: Available through Configure To Order only. See Factory Integration Models section for
more details.
Intel® Core™ processor i3-540 (3.06GHz, 73W, 4MB, 1333, HT)
NOTE: Available through Configure To Order only. See Factory Integration Models section for
more details.
Intel® Core™ processor i3-530 (2.93GHz, 73W, 4MB, 1333, HT)
NOTE: Available through Configure To Order only. See Factory Integration Models section for
more details.
Intel® Pentium® processor G6950 (2.80GHz, 73W, 3MB, 1066)
Intel® Celeron® processor G1101 (2.26GHz, 73W, 2MB, 1066)
NOTE: Available through Configure To Order only. See Factory Integration Models section for
more details.
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using Intel® Turbo
Boost Technology, with 4, 3, 2, and 1 cores active.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed
may depend on the quantity and type of DIMMs installed.
Cache Memory
Integrated 8MB Intel® Smart Cache (Xeon 3400 series)
Integrated 4MB Intel® Smart Cache (Core i3 series)
Integrated 3MB Intel® Smart Cache (Pentium G6950)
Integrated 2MB Intel® Smart Cache (Celeron G1101)
Chipset
Intel® 3420 chipset
NOTE: For more information regarding Intel chipsets, please see the following URL:
http://www.intel.com/products/server/chipsets/
Memory Protection
ECC
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
Page 2
QuickSpecs
HP ProLiant ML110 Generation 6
Standard Features
Memory
Type
DIMM Slots
Standard
Maximum
Network Controller
Embedded NC107i PCI Express Gigabit Ethernet Server Adapter
Expansion Slots #
Technology
PC3-10600E unbuffered DDR3 ECC up to 1333MHz
Total 4 DIMM slots
2GB (1x2GB) or 4GB (2x2GB)
16GB
Bus
Width***
X1
Connector
Width
X4
Bus
Number*
16
Device
Number**
0
Form
Notes
Factor
1
PCIe
Full height, Gen.1, NHP
half length
slot
2
PCI
32 bit
N/A
48
0
Full height & 33MHz/3.3V,
Full-length
NHP
slot
3
PCIe
X4
X8
32
0
Full height & Gen.1, NHP
Full-length
slot
4
PCIe
X16
X16
1
0
Full height & Gen.2, NHP
Full-length
slot
*Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment number.
** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting
with the lowest bus).
*** Indicates the number of physical electrical lanes running to a PCI-e connector.
Storage Controller
HP Embedded Smart Array B110i SATA RAID Controller (RAID 0/1/10)
NOTE: Supports up to four (4) 3.0Gb/s SATA hard disk drives only
NOTE: For set up instructions, please refer to the HP ProLiant ML100 series server user guide
at:
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01708878/c01708878.pdf
NOTE: For general information about HP Smart Array B110i SATA RAID Controller, please go
to:
http://h18004.www1.hp.com/products/servers/proliantstorage/arraycontrollers/smartarrayb110i/
index.html
Internal Storage
Devices
Optical Drive
Hard Drives
HP Half-Height SATA DVD-ROM Optical Drive ships standard
1x160 GB NHP SATA 7200 rpm Drive (Entry Model)
1x250 GB NHP SATA 7200 rpm Drive (Base Model)
2x250 GB NHP SATA 7200 rpm Drive (Performance Model)
Maximum Internal
Storage
Non-Hot Plug SAS
Non-Hot Plug SATA
2.4TB (4 x 600GB) 3.5" SAS
8.0TB (4 x 2TB) 3.5" SATA
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
Page 3
QuickSpecs
HP ProLiant ML110 Generation 6
Standard Features
Interfaces
Parallel
Serial
Pointing Device
(Mouse, PS2)
Graphics
Keyboard (PS2)
USB 2.0 Ports
0
1
1
1
1
8 total (4 rear, 2 front panel, 2 internal (one for USB Tape
connectivity))
NOTE: 1 Dedicated USB port available for internal USB tape connectivity
NOTE: Please see the following URL for additional information regarding USB support
http://h18004.www1.hp.com/products/servers/platforms/usb-support.html
Network RJ-45
1(10/100/1000 bits/s)
(Ethernet)
Remote Management HP Lights-Out 100i
Industry Standard
Compliance
ACPI V3.0a Compliant
PCI 2.3 Compliant
PXE Support
WOL Support
IPMI 2.0 compliance
DCMI 1.0
Microsoft® Logo certifications
Red Hat Enterprise Linux Logo certifications
SUSE Linux Enterprise Server Logo certifications
USB 2.0
Server Power Cords
6' country specific, lowline NEMA power cord.
Power Supply
300 Watts Non-Hot Plug, Non redundant Power Supply (80% efficiency)
System Fans
One (1) - Non-redundant system fan ships standard
One (1) - Non-redundant CPU heatsink fan ships standard
Operating Systems
and Virtualization
Software Support for
ProLiant Servers
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and
Virtualization Software and latest listing of software drivers available for your server, please
visit our Support Matrix at: http://www.hp.com/go/supportos and our driver download page
http://www.hp.com/support/ML110G6
Graphics
64MB shared supporting all display resolutions up to 1600 x 1200 16bpp @ 75Hz
NOTE: 8MB is dedicated to video memory.
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
Page 4
QuickSpecs
HP ProLiant ML110 Generation 6
Standard Features
Form Factor
Micro ATX Tower (4U)
NOTE: Rack mounting available via HP Tower to Rack Conversion Tray, Universal Kit. Please
see the options section in this QuickSpecs.
Embedded
Manageability
HP LO100i Advanced HP LO100i Lights-Out 100 with Optional LO100i Advanced Licenses
for Virtual KVM and Virtual Media.
Features:
Embedded IPMI standard reporting
System event log access
Remote Serial console (serial redirection)
Browser, Telnet access
SMASH-CLP compliant
DCMI 1.0 compliant
IPMI 2.0 compliant
Secure Socket Layer Encryption
Secure Shell Encryption
Virtual media (Floppy, CD, DVD, ISO image, USB 2.0) with
Advanced License
Virtual KVM with Advanced License
NOTE: For more information, please refer to the QuickSpecs for the
LO100i found at: www.hp.com/go/lo100
Core Infrastructure
Management
HP ProLiant ML110 G6 The HP ProLiant Easy Set-up CD optimizes single-server setup,
Easy Set-up CD
providing a simple way to deploy reliable and consistent server
configurations. The HP ProLiant 100 Series Easy Set-up CD ships
standard with the ML110 G6.
It offers essential single-server deployment tools for HP ProLiant 100
series servers that simplify HP entry server setup, providing a
repeatable way to deploy reliable and consistent single-server
configurations. The HP ProLiant Easy Set-up CD assists with the OS
installation process by preparing the system for installing "off-theshelf" versions of Windows operating system software and
automatically integrating optimized HP ProLiant server software
drivers and utilities. Users enjoy the following benefits:
An easy-to-use, intuitive graphical interface that prepares your
system for the OS installation process.
Integration of key server software drivers with assisted
installation.
Dependency and validity checks to ensure that all supported
ProLiant software can be installed.
NOTE: For the latest information about other related software;
please visit the HP Insight Control Management Software Portfolio
at: http://h18004.www1.hp.com/products/servers/management/ and
the HP ProLiant Easy Set-up CD Web site at:
www.hp.com/servers/easysetup
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
Page 5
QuickSpecs
HP ProLiant ML110 Generation 6
Standard Features
Manageability
HP Integrated Lights-Out 100i with optional LO100i Advanced Licenses for Virtual KVM and
Virtual Media
Embedded Lights Out 100 IPMI 2.0 standard reporting
Standard HP ProLiant ML110 G6 Easy Set-Up CD
Array Configuration Utility (ACU)
Array Diagnostics Utility (ADU)
HP Insight Diagnostics
HP Insight Management Agents and Insight Management Providers for Systems Insight
Manager (SIM) Integration
Security
Power-on password
Setup password
Secure Sockets Layer (SSL)
Secure Shell (SSH)
Warranty
This product is covered by a global limited warranty and supported by HP Services and a
worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and
repair are available for one year from date of purchase. Support for software and initial setup
is available for 90 days from date of purchase. Enhancements to warranty services are
available through HP Care Pack services or customized service agreements. Hard drives
have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for
details.
NOTE: Server Warranty includes 1 year parts, 1 year labor, 1-year on-site support with next
business day response. (3-1-1 warranty offered in Brazil only). Warranty repairs may be
accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two
categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor
charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR
parts are also designed for easy replacement but may involve added complexity. Customers
may choose to have HP replace Optional CSR parts at no charge. Additional information
regarding worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
Page 6
QuickSpecs
HP ProLiant ML110 Generation 6
Optional Features
Factory Express
Portfolio for Servers
and Storage
HP Factory Express offers configuration, customization, integration and deployment services
for HP servers and/or storage products. Customers can choose how their factory solutions are
built, tested, integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation,
complex configuration and design services as well as individual factory services, such as
image loading, asset tagging and custom packaging HP products supported through Factory
Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant
Server Blades, HP BladeSystem, HP 9000 servers, as well as, the MSAxxxx, VA7xxx, EVA,
XP, rackable tape libraries and configurable network switches.
For more information on Factory Express services for your specific server model please
contact your sales representative or go to: http://www.hp.com/go/factory-express
HP Enterprise
Configurator
The HP eConfigure Enterprise Configurator now provides factory default racking for our HP
hardware portfolio. This approach is aligned with our strategic direction to meet the needs and
expectations of our valued customers. If you require "custom" rack configuration, please
contact HP's Customer Business Center or an Authorized Partner for assistance.
http://www.hp.com/products/configurator.
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
Page 7
QuickSpecs
HP ProLiant ML110 Generation 6
Service and Support
Service and Support
For increased uptime, productivity and ROI - HP Care Pack packaged services for
Servers
These days, you need to get the most out of your server investment - you can't afford not to.
When you buy HP server products and solutions, it's also a good time to think about what
levels of service and support you may need. To help take the worry out of deploying,
designing, maintaining, and managing your environment, we've designed a portfolio of service
options that are as: flexible, reliable and scalable as your server. Unlike server-only vendors,
we take a holistic approach to your entire environment, bridging storage, servers, blades,
software and network infrastructures with our HP Care Pack packaged services for Servers.
Protect your business beyond the warranty
When it comes to robustness and reliability, standard warranties on today's computing
equipment have matured just as the technologies have matured. Good news on some fronts but also a source of potential problems and subsequent consequences that come from
depending on standard warranties alone. Standard warranty protects against product defects
and some causes of downtime - but not the business. By using a standard approach to
warranty uplifts, such as HP Care Pack Services, you can reduce downtime risks and be more
certain of operational consistency for both mission-critical and standard business computing.
Simply put, HP Care Pack Services normalize the warranty of combined products - helping
you proactively guard against unplanned downtime.
Extending warranties with HP Care Pack Services
For cost-effective upgrading or extending your standard warranty, HP Care Pack Services
offer a suite of standard reactive hardware and software support services that are sold
separately, or combined as with our Support Plus and Support Plus 24 services. The portfolio
also provides a combination of proactive and reactive services, such as Proactive 24 Service
and Critical Service. In addition, with HP Proactive Select we offer an innovative approach to
service delivery that gives you the flexibility to acquire the specific proactive services you need
today, then add services as your needs evolve. HP Proactive Select offers a broad set of
technical or per-event type service options - including server, storage, and network, SAN
device, and software, environment, installation and education services. Services that you can
mix and match depending on your specific requirements, from preliminary planning and
equipment delivery to installation, configuration, integration, and testing, through every level of
ongoing support. Our HP Care Pack packaged services for Servers assures help when you
need it most. And for many products, post-warranty HP Care Pack Services are available
when your original warranty has expired.
HP Server Services: Offering reliability, flexibility and value - just like your storage
HP Server Services offers a full spectrum of customer care, from technology support to
complex migrations to complete completely managed services. HP Factory Express provides
customization, integration and deployment services for turnkey solutions. HP Education offers
flexible, comprehensive training on server networking and server software to help your IT staff
get the most out of your investments. And HP Financial solutions extend innovative financing
and asset management programs to cost-effective buy, manage and eventually retire your
older equipment.
HP Server Services, the trusted business technology experts who manage your technology in
action, because when technology works, business works. http://www.hp.com/services/servers,
http://www.hp.com/services/storage
HP Care Pack Services are sold by HP and HP Authorized Service Partners:
Services for customers purchasing from HP or an enterprise reseller are quoted using
HP order configuration tools.
Customers purchasing from a commercial reseller can find HP Care Pack Services at:
http://www.hp.com/go/lookuptool
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
Page 8
QuickSpecs
HP ProLiant ML110 Generation 6
Service and Support
NOTE: Care Pack Services availability may vary by product and country.
Recommended HP Care Pack Services for optimal satisfaction with your HP
product
Recommended
Services
3-Year HP Hardware Support Onsite Service, 4-hour response, 13x5
Delivering increased equipment availability and productivity with rapid-response onsite and
remote support for your HP hardware, as well as selected multivendor equipment, this flexible
HP Care Pack Service covers desktops, workstations, servers, storage systems, network
equipment, and printing.
Choose 4-Hour Same Business Day Hardware Support when you need to:
Extend your hardware warranty coverage with prompt service for key systems and
devices
Obtain easy-to-buy, easy-to-use onsite services
Improve hardware performance and uptime
Increase the return on your HP and multivendor hardware investments
Enjoy consistent service coverage across geographically dispersed sites
Optional Defective Media Retention Service
Service feature highlights
Help improve or maintain system uptime
Convenient onsite support
Committed response time
http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE
3-Year HP Hardware Support Onsite Service, Next-day response (9x5)
HP ProLiant services: Our integrated service portfolio covers the entire solution lifecycle for
x86 server environments - from installation and support through the design, deployment, and
management of complex IT environments - so that you can confidently address any IT and
business need.
HP Hardware Support Onsite Service provides high-quality remote assistance and onsite
support for your covered hardware, helping you to improve product time.
Service feature highlights
Help improve or maintain system uptime
Convenient onsite support
Reliable response time
http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE
HP ProLiant Server Hardware Installation
HP Installation Service provides for the basic installation of HP branded servers, workstations,
desktop systems, notebook PCs, thin clients, storage devices, printers, networking, and
software products. The Installation Service is part of a suite of HP deployment services that
are designed to give you the peace of mind that comes from knowing your HP and HPsupported products have been installed by an HP specialist in accordance with the
manufacturer's product documentation.
Expedited installation, with all service prerequisites met before the installation is
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
Page 9
QuickSpecs
HP ProLiant ML110 Generation 6
Service and Support
performed
Installation in accordance with manufacturer's specifications, enhancing the
supportability of your HP-installed hardware and software
Service delivery at a mutually scheduled time
Allows your IT resources to stay focused on their core tasks and priorities
Availability of an HP service specialist to answer questions during the onsite delivery of
this service
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN
Optional HP Care Pack Services that will enhance your HP product experience
Optional Services
3-Year HP Hardware Support Onsite Service, 4-hour response, 24x7
As an alternative to our recommended support level, for customers who need same day
response server level 24x7.
Provides high-quality remote assistance and onsite support for your covered hardware,
helping you to improve product uptime.
Service benefits:
Help improved system uptime
Convenient onsite support
Reliable response time
Remote problem diagnosis and support
Onsite hardware support
Materials included
Service-level options with different coverage windows and response times
Work to completion
Escalation management
Access to electronic support information and services
HP electronic remote monitoring and support solution (for eligible products only)
http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE
3-Year HP Hardware Support Onsite Call-to-Repair (CTR) Service - 24-hour CTR
As an alternative to our recommended support level, for customers who need committed callto-repair for server hardware.
HP Hardware Support Onsite 24x7 24-Hour Call-to-Repair Service provides your IT manager
access to a team of support specialists. They will quickly begin troubleshooting the system to
help return the hardware to operating condition within a maximum of 24 hours from the initial
service request.
HP is committed to repairing your hardware within a maximum of six hours. The benefits
include:
Improved system uptime
Predictable repair times
More effective IT resource planning
Consistent level of hardware support across your multi-technology systems
Optional defective media retention service
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6636ENN
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
Page 10
QuickSpecs
HP ProLiant ML110 Generation 6
Service and Support
3-Year HP Hardware Support Onsite Call-to-Repair (CTR) Service - 6-hour CTR
As an alternative to our recommended support level, for customers who need committed callto-repair for server hardware.
HP Hardware Support Onsite 24x7 6-Hour Call-to-Repair Service provides your IT manager
access to a team of support specialists. They will quickly begin troubleshooting the system to
help return the hardware to operating condition within a maximum of six hours from the initial
service request.
HP is committed to repairing your hardware within a maximum of six hours. The benefits
include:
Improved system uptime
Predictable repair times
More effective IT resource planning
Consistent level of hardware support across your multi-technology systems
Optional defective media retention service
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6636ENN
eSupport
HP eSupport is a portfolio of technology-based services that assist you with managing your
business environment - from the desktop to the data center.
Support Portal
The HP support portal provides one-stop access to the information, tools and services you
need to manage the daily operations of your IT environment.
Features include:
Access to self-solve tools (including search technical knowledge base)
Efficient logging and tracking of support cases
Collaboration with other business and IT professionals
Download of patches and drivers
Access to diagnostic tools
Proactive notification of relevant information
Access to certain features of the support portal requires an HP service agreement. To access
the support portal, visit: http://www.hp.com/support
HP Insight Remote Support software delivers secure remote support for your HP Servers and
Storage, 24 X 7, so you can spend less time solving problems and more time focused on your
business. You can have your systems remotely monitored for hardware failure using secure
technology that's been proven at thousands of companies around the world. In many cases,
you can avoid problems before they occur.
Customer Technical
Training
HP Services continues to be recognized for service and support excellence by customers,
partners, industry organizations and publications around the world. Recent honors and award
reflect our services team's dedications, technical expertise, professionalism and
uncompromising commitment to customer satisfaction. For a list of all our awards, please visit:
http://h20219.www2.hp.com/services/cache/433028-0-0-225-121.htm
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
Page 11
QuickSpecs
HP ProLiant ML110 Generation 6
Service and Support
HP Services Awards
HP Services continues to be recognized for service and support excellence by customers,
partners, industry organizations and publications around the world. Recent honors and award
reflect our services team's dedications, technical expertise, professionalism and
uncompromising commitment to customer satisfaction. For a list of all our awards, please visit:
http://h20219.www2.hp.com/services/cache/433028-0-0-225-121.htm
Additional Services
Information
For more information about HP Care Pack Services for Servers, please visit:
http://www.hp.com/services/servers
To learn more on HP ProLiant servers and HP BladeSystem, please contact your HP sales
representative or HP Authorized Channel Partner, or visit: www.hp.com/services/proliant or
www.hp.com/services/bladesystem.
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
Page 12
QuickSpecs
HP ProLiant ML110 Generation 6
Pre-configured Models
SATA Models
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration
Information - Factory Integrated Models" section.
NOTE: Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional
options section of this QuickSpecs.
NOTE: HP does not allow factory integration of options into pre-configured models. Any additional options purchased
will be shipped separately.
NOTE: If you desire a custom configuration please see "Configuration Information - Factory Integrated Models" section
of this QuickSpecs.
NOTE: Not all models are available in all regions. Check with your local country HP offices for availability.
NOTE: HP NHP Internal SAS/SATA 4 port cable kit (487734-B21) is required when Smart Array Controller is ordered
with a BTO configuration
NOTE: For general information about HP Smart Array B110i SATA RAID Controller, please visit:
http://h18004.www1.hp.com/products/servers/proliantstorage/arraycontrollers/smartarrayb110i/index.html
Entry Model
Processor
(1) Intel® Pentium® processor G6950 (2.80GHz, 73W, 3MB,
1066)
HP ML110 G6 G6950 Cache Memory
3MB Intel® Smart Cache
NHP SATA Server
Memory
2GB (1x2GB) PC3-10600E DDR3 UB ECC
506666-xx1
NOTE: Total 4 DIMM slots.
Network Controller
Embedded NC107i PCI Express Gigabit Ethernet Server Adapter
Storage Controller
HP Embedded Smart Array B110i SATA RAID Controller (RAID
0/1/10)
(4 ports for HDD)
Hard Drive
1 x 160GB Non-hot-plug LFF SATA
Internal Storage
8.0TB (4 x 2.0TB) Non-hot plug LFF SATA (Maximum)
Optical Drive
HP Half-Height 16x SATA DVD-ROM
Power Supply
300W Non-Hot Plug, Non-Redundant Power Supply (80%
efficiency)
Fans
One (1) - Non-redundant system fan ships standard
One (1) - Non-redundant CPU heatsink fan ships standard
Management
Integrated HP ProLiant 100 G6 Lights Out 100i Remote
Management
Form Factor
Micro ATX Tower (4U)
Warranty
Server Warranty includes 1 year parts, 1 year labor, 1-year on-site
support with next business day response. (3-1-1 warranty offered
in Brazil only).
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
Page 13
QuickSpecs
HP ProLiant ML110 Generation 6
Pre-configured Models
Base Model
Processor
HP ML110 G6 X3430
NHP SATA Server
506667-xx1
Cache Memory
Memory
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive
Power Supply
Fans
Management
Form Factor
(1) Intel® Xeon® processor X3430 (2.40GHz, 95W, 8MB, 1333,
Turbo 1/1/2/3)
8MB Intel® Smart Cache
2GB (1x2GB) PC3-10600E DDR3 UB ECC
NOTE: Total 4 DIMM slots.
Embedded NC107i PCI Express Gigabit Ethernet Server Adapter
HP Embedded Smart Array B110i SATA RAID Controller (RAID
0/1/10)
(4 ports for HDD)
1 x 250GB Non-hot-plug LFF SATA
8.0TB (4 x 2.0TB) Non-hot plug LFF SATA (Maximum)
HP Half-Height 16x SATA DVD-ROM
300W Non-Hot Plug, Non-Redundant Power Supply (80% efficiency)
One (1) - Non-redundant system fan ships standard
One (1) - Non-redundant CPU heatsink fan ships standard
Integrated HP ProLiant 100 G6 Lights Out 100i Remote Management
Micro ATX Tower (4U)
Warranty
Server Warranty includes 1 year parts, 1 year labor, 1-year on-site
support with next business day response. (3-1-1 warranty offered in
Brazil only).
Performance model
Processor
HP ML110 G6 X3450
NHP SATA Server
506668-xx1
Cache Memory
Memory
(1) Intel® Xeon® processor X3450 (2.66GHz, 95W, 8MB, 1333, HT,
Turbo 1/1/4/4)
8MB Intel® Smart Cache
4GB (2x2GB) PC3-10600E DDR3 UB ECC
NOTE: Total 4 DIMM slots.
Embedded NC107i PCI Express Gigabit Ethernet Server Adapter
HP Embedded Smart Array B110i SATA RAID Controller (RAID
0/1/10)
(4 ports for HDD)
2 x 250GB Non-hot-plug LFF SATA
8.0TB (4 x 2.0TB) Non-hot plug LFF SATA (Maximum)
HP Half-Height 16x SATA DVD-ROM
300W Non-Hot Plug, Non-Redundant Power Supply (80% efficiency)
One (1) - Non-redundant system fan ships standard
One (1) - Non-redundant CPU heatsink fan ships standard
Integrated HP ProLiant 100 G6 Lights Out 100i Remote Management
Micro ATX Tower (4U)
Server Warranty includes 1 year parts, 1 year labor, 1-year on-site
support with next business day response. (3-1-1 warranty offered in
Brazil only).
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive
Power Supply
Fans
Management
Form Factor
Warranty
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
Page 14
QuickSpecs
HP ProLiant ML110 Generation 6
Pre-configured Models
Country Code Key
xx=00
xx=01
xx=03
xx=04
xx=05
xx=37
xx=42
xx=AA
NA
Australia
UK
Germany
France
AP
Euro
PRC (Excludes P/N 506666-xx1)
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
Page 15
QuickSpecs
HP ProLiant ML110 Generation 6
Configuration Information-Factory Integrated Models
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration
Information - Factory Integrated Models" section.
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on configurable product offerings and requirements.
NOTE: Configure-to-order (CTO) servers must start with a CTO Chassis.
NOTE: FIO indicates that this option is only available as a factory installable option.
Step 1: Base Configuration
HP Models
HP ProLiant ML110 G6 Configure-to-order Server
Factory Integrated Models ship with:
Embedded NC107i PCI Express Gigabit Ethernet Server Adapter
Integrated HP ProLiant 100 G6 Lights Out 100i Remote Management
HP Embedded Smart Array B110i SATA RAID Controller (RAID 0/1/10), 4
ports for HDD
NOTE: For set up instructions for HP Smart Array B110i SATA Controller
please refer to the HP ProLiant ML100 series server user guide at:
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01708878/
c01708878.pdf
NOTE: For general information about HP Smart Array B110i SATA RAID
Controller, please visit:
http://h18004.www1.hp.com/products/servers/proliantstorage/arraycontrollers/
smartarrayb110i/index.html
Non hot-plug SAS/SATA 4 port cable
Easy set up CD
PCA
Power cord
Micro ATX Tower (4U)
510078-B21
Step 2: Choose Required Options (only one of the following from each list
unless otherwise noted)
HP Processors
Quad-Core Processor
HP ML110G6 Intel® Xeon® X3470 (2.93GHz/4-core/8MB/95W) FIO
Processor Kit
HP ML110 G6 Intel® Xeon® X3460 (2.80GHz/4-core/8MB/95W) FIO
Processor Kit
HP ML110 G6 Intel® Xeon® X3450 (2.66GHz/4-core/8MB/95W) FIO
Processor Kit
HP ML110 G6 Intel® Xeon® X3440 (2.53GHz/4-core/8MB/95W) FIO
Processor Kit
HP ML110 G6 Intel® Xeon® X3430 (2.40GHz/4-core/8MB/95W) FIO
Processor Kit
Dual-Core Processor
HP ML110G6 Intel® Xeon® i3-550 (3.20GHz/2-core/4MB/73W) FIO
Processor Kit
HP ML110 G6 Intel® Core™ i3-540 (3.06GHz/2-core/4MB/73W) FIO
Processor Kit
HP ML110 G6 Intel® Core™ i3-530 (2.93GHz/2-core/4MB/73W) FIO
Processor Kit
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
622187-L21
578348-L21
578347-L21
578346-L21
578345-L21
622185-L21
578352-L21
578351-L21
Page 16
QuickSpecs
HP ProLiant ML110 Generation 6
Configuration Information-Factory Integrated Models
HP Memory
HP Optical Drives
HP Hard Drives
HP Storage
Controllers
HP ML110 G6 Intel® Pentium® G6950 (2.80GHz/2-core/3MB/73W) FIO
Processor Kit
HP ML110 G6 Intel® Celeron G1101 (2.26GHz/2-core/2MB/73W) FIO
Processor Kit
578350-L21
HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS9 Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For
detailed memory configuration rules and guidelines, please use the Online
DDR3 Memory Configuration Tool at: www.hp.com/go/ddr3memoryconfigurator.
500672-B21
HP Half-Height SATA DVD-ROM Optical Drive
447326-B21
HP Half-Height SATA DVD-RW Optical Drive
447328-B21
SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives
HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr
Warranty Hard Drive
HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr
Warranty Hard Drive
HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr
Warranty Hard Drive
SATA Non-Hot Plug LFF (3.5-inch) Entry (ETY) Drives
HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr
Warranty Hard Drive
HP 160GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr
Warranty Hard Drive
SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
NOTE: Support for SAS non-hot plug drives requires HP SAS/Smart Array
Controller. See Step 3 below.
HP 600GB 6G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port
Enterprise 3yr Warranty Hard Drive
HP 450GB 6G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port
Enterprise 3yr Warranty Hard Drive
HP 300GB 6G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port
Enterprise 3yr Warranty Hard Drive
SAS Controller
NOTE: Support for SAS hard drives/tape drive requires selection of a SAS
controller.
NOTE: Support for hardware RAID requires selection of a SAS controller.
Smart Array P212 Controller
HP Smart Array P212/256 1-ports Int/1-ports Ext PCIe x8 FIO SAS Controller
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
578349-L21
500670-B21
500668-B21
507774-B21
507772-B21
458941-B21
571232-B21
458947-B21
516830-B21
516826-B21
516824-B21
491191-B21
Page 17
QuickSpecs
HP ProLiant ML110 Generation 6
Configuration Information-Factory Integrated Models
Step 3: Choose Additional Factory Integratable Options (only one of the
following from each list unless otherwise noted)
HP USB and SD
Options
HP ProLiant Server PS/2 Mouse, FIO
HP ProLiant Server PS/2 Keyboard, FIO
AC105A
AC110A
Step 4: Choose Additional Options for Factory Integration
NOTE: For additional "Core Options" and "Additional Options", please refer to the "Options" sections below.
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
Page 18
QuickSpecs
HP ProLiant ML110 Generation 6
Core Options
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP
recommends the use of an HP approved configurator. Contact your local sales representative for additional
information.
HP Memory
HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
500672-B21
Memory Kit
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
500670-B21
Memory Kit
HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS500668-B21
9 Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For
detailed memory configuration rules and guidelines, please use the Online
DDR3 Memory Configuration Tool at: www.hp.com/go/ddr3memoryconfigurator.
HP Optical Drives
HP Half-Height SATA DVD-ROM Optical Drive
HP Half-Height SATA DVD-RW Optical Drive
HP Hard Drives
NOTE: The components of a storage subsystem (e.g. the drive, the
HBA/controller, and firmware) should operate at the same data transfer rate
or the system bandwidth will be negotiated down to an acceptable level for all
components.
NOTE: Hard drives have either a one year or three year warranty; refer to the
specific hard drive QuickSpecs for details.
SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives
HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr
Warranty Hard Drive
HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr
Warranty Hard Drive
HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr
Warranty Hard Drive
SATA Non-Hot Plug LFF (3.5-inch) Entry (ETY) Drives
HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr
Warranty Hard Drive
HP 160GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr
Warranty Hard Drive
NOTE: Please see the QuickSpecs for Technical Specifications and
additional information:
http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html
(Worldwide)
SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
NOTE: Support for SAS non-hot plug drives requires HP SAS/Smart Array
Controller.
HP 600GB 6G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port
Enterprise 3yr Warranty Hard Drive
HP 450GB 6G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port
Enterprise 3yr Warranty Hard Drive
HP 300GB 6G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port
Enterprise 3yr Warranty Hard Drive
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
447326-B21
447328-B21
507774-B21
507772-B21
458941-B21
571232-B21
458947-B21
516830-B21
516826-B21
516824-B21
Page 19
QuickSpecs
HP ProLiant ML110 Generation 6
Core Options
NOTE: Please see the QuickSpecs for Technical Specifications and
additional information:
http://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html
(Worldwide)
HP Networking
HP NC112T PCI Express Gigabit Server Adapter
HP NC360T PCI-E Dual Port Gigabit Server Adapter
HP NC373T PCI-E Multifunction Gigabit Server Adapter
HP NC382T PCI Express Dual Port Multifunction Gigabit Server Adapter
NOTE: Please see the QuickSpecs for Technical Specifications and
additional information: www.hp.com/go/ProLiantNICs
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
503746-B21
412648-B21
394791-B21
458492-B21
Page 20
QuickSpecs
HP ProLiant ML110 Generation 6
Additional Options
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP
recommends the use of an HP approved configurator. Contact your local sales representative for additional
information.
HP Entry-Level Server HP Lights-Out 100i (LO100i) Advanced including 1yr 24x7 Support Single
530521-B21
Management
Server License
NOTE: For additional License Kits please see the Lights-Out 100i
QuickSpecs at: www.hp.com/go/lo100.
HP Security (TPM)
HP Trusted Platform Module Option
NOTE: The TPM (Trusted Platform Module) is a microcontroller chip that can
securely store artifacts used to authenticate the server platform. These
artifacts can include passwords, certificates and encryption keys. Windows®
BitLocker™ Drive Encryption (BitLocker) is a data protection feature available
in Windows Server® 2008. BitLocker leverages the enhanced security
capabilities of a Trusted Platform Module (TPM) version 1.2. The TPM works
with BitLocker to help protect user data and to ensure that a server running
Windows Server 2008 has not been tampered with while the system was
offline.
NOTE: For more information about TPM, please visit: www.hp.com/go/TPM
NOTE: ProLiant OS pre-installed units will come with the partition required for
TPM deployment.
NOTE: The TPM key is unique to every TPM deployed server and must be
retained. Misplacing or losing the key could result in data loss.
HP Storage
Controllers
SAS Controllers
NOTE: Support for SAS hard drives/tape drive requires selection of a SAS
controller.
NOTE: Support for hardware RAID requires selection of a SAS controller.
Smart Array P212 Controller
HP Smart Array P212/ZM 1-ports Int/1-ports Ext PCIe x8 SAS Controller
HP Smart Array P212/256 1-ports Int/1-ports Ext PCIe x8 SAS Controller
Optional Upgrades
HP 256MB P-series Cache Upgrade
HP 650 mAh P-Series Battery
NOTE: Required to enable BBWC on the 256MB cache.
NOTE: Please see the following QuickSpecs for Technical Specifications and
additional information:
http://h18000.www1.hp.com/products/quickspecs/13203_div/13203_div.html
(Smart Array P212 Controller)
HP Non-Hot Plug Internal SAS/SATA 4 Port Cable Kit
NOTE: This cable will only be required when Smart Array Controller is
ordered with a BTO configuration.
SCSI HBA
HP SC11Xe Ultra320 Single Channel/ PCIe x4 SCSI Host Bus Adapter
NOTE: Supports SCSI Tapes only, no RAID support.
NOTE: HBA is recommended for SCSI tape drive support.
NOTE: Please see the following QuickSpecs for Technical Specifications and
additional information:
http://h18004.www1.hp.com/products/quickspecs/12566_div/12566_div.html
(SC11Xe HBA)
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
488069-B21
462828-B21
462834-B21
462968-B21
462969-B21
487734-B21
412911-B21
Page 21
QuickSpecs
HP ProLiant ML110 Generation 6
Additional Options
HP Backup &
Recovery Software
Data Protector Express
HP Data Protector Express V5.0 for 1 Server E-LTU
HP Data Protector Express V5.0 for 3 Servers E-LTU
HP Data Protector Express V5.0 for 10 Servers E-LTU
HP Basic Upgrade to Data Protector Express V5 for 1 Server E-LTU
NOTE: Only one of these Data Protector Express base products is required.
To see available options: http://www.hp.com/go/dataprotectorexpress
HP Tape Backup
NOTE: For the complete range of StorageWorks tape drives, autoloaders,
libraries and media see: http://www.hp.com/go/tape. For hardware and
software compatibility of HP StorageWorks tape backup products see:
http://www.hp.com/go/connect.
HP StorageWorks DAT 320 USB Internal Tape Drive
HP StorageWorks DAT 320 SAS Internal Tape Drive
NOTE: Connection using HP P212 Smart Array Controller SAS (462828-B21)
recommended.
HP StorageWorks Ultrium 448 SAS Internal Drive
NOTE: Connection using HP P212 Smart Array Controller SAS (462828-B21)
recommended.
HP StorageWorks Ultrium 920 SAS Internal Tape Drive
NOTE: Connection using HP P212 Smart Array Controller SAS (462828-B21)
recommended.
HP StorageWorks 1/8 G2 Ultrium 920 SAS Autoloader
NOTE: Requires HP 1U Tape Autoloader Rack-Mount Kit (AH166A) for rack
installation. Connection using HP P212 Smart Array Controller SAS (462828B21) recommended.
HP StorageWorks MSL2024 Ultrium 920 SAS Tape Library
NOTE: Connection using HP P212 Smart Array Controller SAS (462828-B21)
recommended.
HP Disk Backup
NOTE: For the complete range of StorageWorks D2D Backup Systems see:
http://www.hp.com/go/d2d. For the complete range of StorageWorks RDX
drives and media see: http://www.hp.com/go/rdx. For hardware and software
compatibility of HP StorageWorks disk backup products see:
http://www.hp.com/go/connect.
HP StorageWorks D2D Backup Systems with Backup Data Deduplication
NOTE: These are network connected appliances with connectivity using the
iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic
QLA4050 Host Bus Adapter is recommended.
HP StorageWorks D2D2502i Backup System
NOTE: 1.5TB of usable network disk backup capacity. Network connected
appliance with connectivity using the iSCSI protocol. If the server requires a
hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is
recommended.
HP StorageWorks D2D2504i Backup System
NOTE: 3.0TB of usable network disk backup capacity. Network connected
appliance with connectivity using the iSCSI protocol. If the server requires a
hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is
recommended.
USB Removable Media RDX Disk Backup Systems
HP StorageWorks RDX320 Internal Removable Disk Backup System
NOTE: 320GB of disk capacity per data cartridge.
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
TC330AAE
TC331AAE
TC332AAE
TC333AAE
AJ825A
AJ830A
DW085A
EH847A
AH558A
AH559A
EJ001B
EJ002B
AJ767A
Page 22
QuickSpecs
HP ProLiant ML110 Generation 6
Additional Options
HP StorageWorks RDX500 Internal Removable Disk Backup System
NOTE: 500GB of disk capacity per data cartridge.
HP StorageWorks RDX750 Internal Removable Disk Backup System
NOTE: 750GB of disk capacity per data cartridge.
HP Uninterruptible
Power Systems
HP Rack Series
HP Tower UPS
HP T750 G2 UPS Models
HP T750 G2 750VA INTL Tower Uninterruptible Power System
HP T750 G2 750VA NA Tower Uninterruptible Power System
HP T750J JP Uninterruptible Power System
HP T1000 G3 UPS Models
HP T1000 G3 1000VA INTL Tower Uninterruptible Power System
HP T1000 G3 1000VA NA Tower Uninterruptible Power System
HP T1000J JP Uninterruptible Power System
NOTE: For additional information regarding HP Uninterruptable Power
Systems, please see the following URL: www.hp.com/go/rackandpower
(Worldwide)
NOTE: For additional information on sizing your server, please reference:
http://www.upssizer.com
NOTE: Please see the UPS and PDU cable matrix's on the HP Power
Protection and Management page. Under Power Cords, click on the "HP
Power Cord Matrix" link. That link will list cable descriptions, requirements,
and specifications for UPS and PDU units. Please see the following link:
www.hp.com/products/powercords.
HP Rack 10000 G2 Series (Graphite Metallic)
HP 10642 G2 Pallet Universal Rack
HP 10642 G2 Shock Universal Rack
NOTE: It is mandatory to use a shock pallet when shipping racks with
equipment installed.
NOTE: Please see the Rack 10000 G2 QuickSpecs for Technical
Specifications such as height, width, depth, weight, and color:
http://h18000.www1.hp.com/products/quickspecs/12402_div/12402_div.html
(Worldwide)
NOTE: For additional information regarding Rack Cabinets, please see the
following URL: http://www.hp.com/go/rackandpower (Worldwide)
NOTE: The increasing power of new high-performance processor technology
requires increased cooling efficiency for rack-mounted servers. The 10000
G2 Series Racks provide enhanced airflow for maximum cooling, allowing
these racks to be fully loaded with servers using the latest processors.
AJ934A
AW577A
AF447A
AF446A
AF456A
AF449A
AF448A
AF457A
AF001A
AF002A
CAUTION: If a third-party rack is used, observe the following additional
requirements to ensure adequate airflow and to prevent damage to the
equipment:
Front and rear doors: If your 42U server rack includes closing front and
rear doors, you must allow 830 square inches (5,350 sq cm) of hole
evenly distributed from top to bottom to permit adequate airflow
(equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the
side panels of the rack must be a minimum of 2.75 inches (7 cm).
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
Page 23
QuickSpecs
HP ProLiant ML110 Generation 6
Additional Options
CAUTION: Always use blanking panels to fill all remaining empty front panel
U-spaces in the rack. This arrangement ensures proper airflow. Using a rack
without blanking panels results in improper cooling that can lead to thermal
damage.
NOTE: HP ProLiant DL rack models have fixed rails which provide support
for racks with round mounting holes and tool-free support for racks with
square mounting holes (including Compaq/HP 7000, 9000, 10000 and HP
series), with an adjustment range of 26" - 36".
NOTE: Support for all 2 and 4 post Telco racks and threaded hole racks
requires an additional option kit from Rack Solutions. The Rack Solutions
brackets can be purchased at: www.hp.com/go/rackandpower.
HP Rack Options
HP KVM Switch Options
Server console switch 0x2x8
Server console switch 0x2x16
0x2x16 KVM Server Console G2 Switch with Virtual Media and CAC
0x2x32 KVM Server Console G2 Switch with Virtual Media and CAC
1x1Ex8 KVM IP Console Switch G2 with Virtual Media and CAC
2x1Ex16 KVM IP Console Switch G2 with Virtual Media and CAC
4x1Ex32 KVM IP Console Switch G2 with Virtual Media and CAC
NOTE: For additional information regarding KVM Switches, Serial Console
servers, rack mount monitors, keyboards and all related options please see
the following URL: http://www.hp.com/go/kvm.
HP Rack Options
HP Tower to Rack Conversion Tray Universal Kit
HP USB and SD
Options
HP USB 2-Button Optical Mouse ALL
HP USB 04 Standard Keyboard
NOTE: For the installation of Windows and other OS's, a floppy drive or the
HP USB Floppy Drive Key may be required to complete driver installation. A
standard USB drive key may not work to complete driver installation.
HP Care Pack Services Hardware Services Next Business Day On-Site Service
9-Hour x 5-Day Coverage, 3 Years, Electronic
Hardware Services - 4-Hour On-site Service
13-Hour x 5-Day Coverage, 3 Years, Electronic
24-Hour x 7-Day Coverage, 3 Years, Electronic
Hardware Services 6-Hour Call to Repair On-Site Service
6-Hour Call to Repair, On-Site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Hardware Installation
Hardware Installation, Electronic
NOTE: For more information, customer/resellers can contact:
http://www.hp.com/services/carepack.
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
AF616A
AF617A
AF618A
AF619A
AF620A
AF621A
AF622A
417705-B21
DC172B
DT528A#xxx
U4433E
U4434E
U4435E
U4436E
U4444E
Page 24
QuickSpecs
HP ProLiant ML110 Generation 6
Memory
HP ProLiant ML110 G6 Models
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
Standard Memory
SATA Models:
2GB or 4 GB of PC3-10600E DDR3 UDIMM running up to 1333MHz with memory kits installed.
Standard Memory with Optional Memory
Up to 8GB of memory is available with the installation of standard and optional memory, 4x 2 GB PC3-10600E unbuffered ECC DDR3 SDRAM DIMM Memory kits.
NOTE: The below chart does not represent all possible memory configurations.
NOTE: For best performance, it is recommended that customer installs memory in identical pairs (Slots 1C and 3D are
interleaving pair. Slots 2A and 4B are interleaving pair).
Memory
Standard (Entry
Model)
Standard (Base
Model)
Standard
(Performance
Model)
Maximum
Slot
2 GB
DIMM1C
Empty
DIMM2A
2 GB
DIMM3D
Empty
DIMM4B
Empty
2 GB
Empty
2 GB
Empty
Empty
4 GB
Empty
2 GB
Empty
2 GB
16 GB
4 GB
4 GB
4 GB
4 GB
Following are memory options available from HP:
HP Memory
HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS9 Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For
detailed memory configuration rules and guidelines, please use the Online
DDR3 Memory Configuration Tool: www.hp.com/go/ddr3memoryconfigurator.
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
500672-B21
500670-B21
500668-B21
Page 25
QuickSpecs
HP ProLiant ML110 Generation 6
Storage
1.
1st removable media drive
2.
2nd removable media drive
3.
4th SAS/SATA hard drive
4.
3rd SAS/SATA hard drive
5.
2nd SAS/SATA hard drive
6.
1st SAS/SATA hard drive
7.
HDD spare screws
8.
Removable media drive spare screws
Drive Support
Removable Media
DVD Drive
DVD-RW Drive
Quantity
Supported
Position
Supported
2
2
1 or 2
1 or 2
Controller
Integrated SATA
Integrated SATA
Hard Drives (SATA Models only)
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, and firmware) should operate at the
same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives
Quantity
Position
Supported
Supported Controller
2TB 3G 7.2K
Up to 4
3,4,5,6
Smart Array B110i SATA RAID Controller (RAID 0/1/10)
1TB 3G 7.2K
NOTE: Hardware RAID support requires purchase of HP Smart
500GB 3G 7.2K
Array P212 Controller.
SATA Non-Hot Plug LFF (3.5-inch) Entry (ETY) Drives
Quantity
Position
Supported
Supported Controller
250GB 3G 7.2K
Up to 4
3,4,5,6
Smart Array B110i SATA RAID Controller (RAID 0/1/10)
160GB 3G 7.2K
NOTE: Hardware RAID requires purchase of HP Smart Array
P212 Controller.
Hard Drives (SAS Models only)
SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
NOTE: SAS non-hot plug drives require HP SAS/Smart Array Controller.
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
Page 26
QuickSpecs
HP ProLiant ML110 Generation 6
Storage
600GB 6G 15K DP
450GB 6G 15K DP
300GB 6G 15K DP
Quantity
Supported
Up to 4
Position
Supported
3,4,5,6
Controller
Smart Array P212 Controller
NOTE: Transfer rates of drives are dependent on the maximum
transfer rate supported by the Controller. Refer to the
Controller technical specifications for details.
Maximum Storage Capacity - SATA/SAS Models
Internal
SATA
8.0TB (4 x 2TB)
SAS
2.4TB (4 x 600GB)
Tape and Disk-Based Backup
NOTE: For the complete range of StorageWorks tape drives, autoloaders, libraries and media, including the internal fitting
models, see: http://www.hp.com/go/tape. For the complete range of StorageWorks D2D Backup Systems see:
http://www.hp.com/go/d2d. For the complete range of StorageWorks RDX drives and media see: http://www.hp.com/go/rdx.
For hardware and software compatibility of HP StorageWorks disk and tape backup products see:
http://www.hp.com/go/connect.
Position
Internal or
External
Recommended Controller
HP SC11Xe Ultra320 Single Channel/ PCIe x4 SCSI Host Bus
Adapter
Part Number
412911-B21
HP StorageWorks SCSI
Rack Mount Kits
1U Rack-Mount Kit
3U Rack-Mount Kit
External
HP SC11Xe Ultra320 Single Channel/ PCIe x4 SCSI Host Bus
Adapter
412911-B21
HP StorageWorks USB
Tape Drives
DAT 40
DAT 72
DAT 160
DAT 320
Internal or
External
USB 2.0 Port
N/A
HP StorageWorks USB
Rack Mount Kits
1U USB Rack-Mount Kit
External
USB 2.0 Port
N/A
HP StorageWorks SAS
Tape Drives
DAT 160
DAT 320
LTO-2 Ultrium 448
LTO-3 Ultrium 920
Internal or
External
HP StorageWorks SCSI
Tape Drives
LTO-1 Ultrium 232
LTO-2 Ultrium 448
LTO-3 Ultrium 920
LTO-3 Ultrium 960
LTO4 Ultrium 1760
LTO-4 Ultrium 1840
DAT 40
DAT 72
DAT 160
HP Smart Array P212/ZM 1-ports Int/1-ports Ext PCIe x8 SAS
Controller
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
462828-B21
Page 27
QuickSpecs
HP ProLiant ML110 Generation 6
Storage
LTO-4 Ultrium 1760
LTO-4 Ultrium 1840
LTO-5 Ultrium 3000
LTO-5 Ultrium 3280
HP StorageWorks SAS
Rack Mount Kits
1U Rack-Mount Kit
3U Rack-Mount Kit
External
HP Smart Array P212/ZM 1-ports Int/1-ports Ext PCIe x8 SAS
Controller
462828-B21
HP StorageWorks SCSI
Tape Autoloaders
DAT 72x10 Autoloader
1/8 G2 Autoloader
External
HP SC11Xe Ultra320 Single Channel/ PCIe x4 SCSI Host Bus
Adapter
412911-B21
HP StorageWorks SCSI
Tape Libraries
MSL2024
MSL4048
MSL8096
MSL6000
External
HP StorageWorks U320e SCSI Dual Channel Host Bus
Adapter
HP StorageWorks SAS
Tape Autoloaders and
Libraries
1/8 G2 Autoloader
MSL2024
MSL4048
MSL8096
External
HP Smart Array P212/ZM 1-ports Int/1-ports Ext PCIe x8 SAS
Controller
HP StorageWorks Fibre
Channel Tape Libraries
MSL2024
MSL4048
MSL8096
MSL6000
External
Please consult the EBS connectivity matrix at:
http://www.hp.com/go/ebs for connectivity information and the
supported Fibre Channel HBAs shown in this QuickSpecs.
HP StorageWorks USB
RDX Removable Disk
Backup System
RDX160
RDX320
RDX500
RDX750
Internal or
External
HP StorageWorks D2D
Backup Systems, iSCSI
D2D2500i
D2D4000i
External
Embedded Network Controller. If the server requires a
hardware iSCSI initiator, the QLogic QLA4050 Host Bus
Adapter is recommended.
HP StorageWorks D2D
Backup Systems, Fibre
Channel
D2D4000fc
External
Direct server attach is not supported, requires connection via
SAN fabric. See: http://www.hp.com/go/connect
AH627A
462828-B21
USB 2.0 port
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
N/A
Page 28
QuickSpecs
HP ProLiant ML110 Generation 6
Power Specifications
300 Watts Non-Hot Plug, Non redundant Power Supply
Part Number
445067-001
Operational Input Voltage Range 100 to 127 and 200 to 240 V auto ranging
(Vrms)
Frequency Range (Nominal) (Hz) 50 to 60 Hz
Nominal Input Voltage (Vrms)
Max Rated Output Wattage Rating
Nominal Input Current (A rms)
Max Rated Input Wattage Rating
(Watts)
Max. Rated VA (Volt-Amp)
Efficiency (%)
Power Factor
Leakage Current (mA)
Maximum Inrush Current (A peak)
Maximum Inrush Current duration
(mS)
100
300
5
400
120
300
5
N/A
200
300
2.5
N/A
230
300
2.5
400
240
300
2.5
N/A
400
80%
0.9
3.5mA
N/A
N/A
80%
N/A
N/A
No component
was damaged
and input fuse
shall not blow
N/A
N/A
80%
N/A
N/A
N/A
400
80%
0.9
N/A
No component
was damaged
and input fuse
shall not blow
N/A
N/A
80%
N/A
N/A
N/A
N/A
N/A
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
N/A
Page 29
QuickSpecs
HP ProLiant ML110 Generation 6
System Specifications
Power **
HP ProLiant ML110 G6 Fully
(see **)
Configured
Fully Loaded System output Wattage 300W
(W)
Fully Loaded System Input Current 5A @ 100V, 2.5A @ 200V
(A rms)
Fully Loaded System Thermal (BTU- 1277BTU
Hr)
Fully Loaded System VA (Volt-Amp) 400 VA
System Leakage with all power
3.5mA@110V
supplies loaded (mA)
3.5mA@220V
System Inrush Current with all power <150A@240Vac
supplies loaded (A)
Power cord requirements
Nema 5-15P to IEC320-C13
IEC320-C13 to IEC320-C14
**Power shown is for a fully configured system consisting of (1) CPU, (4) double-sided
DIMMs, (4) HDDs, (1) DVD-ROM, (4) PCI cards, and (1) power supply.
Power Cords (13 Cord Sets)
Country
Taiwan
Japan
India
Brazil
Australia
Euro
PRC
UK
US
ITL
Power Cord Part Number
393312-001
139867-005
397138-002
285052-001
100661-001
100614-009
286496-001
100613-008
121565-001
109197-008
NOTE: To review typical system power ratings use the Active Answers HP Power Advisor which is available via the online
tool located at URL: http://www.hp.com/go/hppoweradvisor
To drill down to calculators:
- Click on: "ProLiant Servers"
- Click on the Server of interest. Example: ML110 G6
- Click on: "Power Calculator" link. (You may need to scroll down to see it)
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
Page 30
QuickSpecs
HP ProLiant ML110 Generation 6
Technical Specifications
System Unit
Dimensions (HxWxD)
(with feet)
Weight (approximate)
Input Requirements
(per power supply)
Power Specifications
Power Supply Output
(per power supply)
System Inlet
Temperature
Relative Humidity
(non-condensing)
Altitude
Acoustic Noise
14.38 x 6.9 x 16.8 in (36.52 x 17.5 x 42.6 cm)
Maximum
30.53 lb (13.85 kg)
(all hard drives, power
supplies, and processors
installed)
Minimum
25.13 lb (11.4 kg)
(one hard drive, power
supply, and processor
installed)
Rated Line Voltage
90 to 132 VAC,
180 to 264 VAC
Rated Input Current
5 A (at 100 VAC),
2.5 A (at 200 VAC)
Rated Input Frequency 47 to 63 Hz
Rated Input Power
400 W (at 100 VAC),
400 W (at 200 VAC)
To review typical power ratings use the Power Advisor which is
available via the online tool located at URL:
http://www.hp.com/go/hppoweradvisor
Rated Steady-State
300 W (at 100 VAC),
Power
300 W (at 200 VAC)
Maximum Peak Power 300 W (at 100 VAC),
300 W (at 200 VAC)
Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 304.8 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3048 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change
is 10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed.
System may shut down if operating with a fan
fault or above 42°C °(107.6°F).
Non-operating
-35° to 65°C (-31° to 149°F). Maximum rate of
change is 20°C/hr (36°F/hr).
Operating
10% to 90% relative humidity (Rh), 28°C
(82.4°F) maximum wet bulb temperature, noncondensing.
Non-operating
10% to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature,
non-condensing.
Operating
3048 m (10,000 ft). This value may be limited
by the type and number of options installed.
Maximum allowable altitude change rate is
609 m/min (2000 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable
altitude change rate is 609 m/min (2000
ft/min).
Listed are the declared A-Weighted sound power levels (LWAd) and
declared average bystander position A-Weighted sound pressure levels
(LpAm) when the product is operating in a 23°C ambient environment.
Noise emissions were measured in accordance with ISO 7779 (ECMA
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
Page 31
QuickSpecs
HP ProLiant ML110 Generation 6
Technical Specifications
Emissions
Classification (EMC)
HP 160GB 3G SATA
458947-B21
7.2K rpm LFF (3.5-inch)
Non-hot Plug Entry 1yr
Warranty Hard Drive
74) and declared in accordance with ISO 9296 (ECMA 109).
Idle
L WAd
4.32 Bels
24.9 dBA
L pAm
Operating
L WAd
4.41 Bels
L pAm
25 dBA
NOTE: The listed sound levels above apply to standard SATA
configurations. Additional options may result in increased sound levels.
FCC Rating
Class B
Normative Standards CISPR 22; EN55022; EN55024; FCC CFR 47,
Pt 15; ICES-003; CNS13438; GB9254; EN
61000-3-2; EN 61000-3-3; EN 60950-1; IEC
60950-1
NOTE: Product conformance to cited product specifications is based on
sample (type) testing, evaluation, or assessment. This product or family
of products is eligible to bear the appropriate compliance logos and
statements.
Capacity
Height
Maximum drive
dimension
Width
Depth
Maximum drive
dimension
Interface
Transfer Rate
(Maximum)
Native Command
Queuing
Seek Time
(typical reads, including
settling)
160,041MB
1.028 in. (26.1 mm)
4.00 in (101.6 mm)
5.787 in (147.0 mm)
Serial ATA
3Gb/s
Supported
Single Track
2.0 ms
Average
<11 ms
Full-Stroke
22.0 ms
Rotational Speed
7,200 rpm
Physical Configuration Bytes/Sector
512
Logical Blocks
312,581,808
Operating Temperature50° to 95° F (10° to 35° C)
(system inlet air
temperature)
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
Page 32
QuickSpecs
HP ProLiant ML110 Generation 6
Technical Specifications
HP 250GB 3G SATA
571232-B21
7.2K rpm LFF (3.5-inch)
Non-hot Plug Entry 1yr
Warranty Hard Drive
Capacity
Height
Maximum drive
dimension
Width
Depth
Maximum drive
dimension
Interface
Transfer Rate
(Maximum)
Native Command
Queuing
Seek Time
(typical reads, including
settling)
250,059MB
1.028 in. (26.1 mm)
4.00 in (101.6 mm)
5.787 in (147.0 mm)
Serial ATA
3Gb/s
Supported
Single Track
Average
Full-Stroke
Rotational Speed
2.0 ms
11 ms
21.0 ms
7,200 rpm
Physical Configuration Bytes/Sector
512
Logical Blocks
488,397,168
Operating Temperature50° to 95° F (10° to 35° C)
(system inlet air
temperature)
HP Half-Height 16X MaxDisk
SATA DVD-ROM
Optical Drive
Applicable Disk
Capacity
Block Size
Interface
Access Times (typical)
DVD Media
SATA
Random
Full-Stroke
Data Transfer Rate
Sustained
Cache Buffer
128 KB
Start-up Time (typical) < 7 seconds
Stop Time
< 4 seconds
Laser Parameters
Type
Wave Length
Operating Conditions Temperature
Humidity
Dimensions
(HxWxD, maximum)
Weight
CD-ROM, CD-XA, CD-DA
(Mode 1, Mode 2, Form 1 and 2)
Photo CD (Single and Multi-session)
Mixed Mode (Audio and Data combined)
CD-R, CD-RW, DVD-ROM, DVD+R,
DVD+RW
4.7 GB (DVD-5)
8.54 GB (DVD-9)
2,048 bytes
3Gb/s
<140 ms
<250 ms
8100 to 21600 KB/s (6X to 16X)
Semiconductor Laser GaA1As
780 ± 25 nm
41° to 122° F (5° to 50° C)
10% to 90%
1.7 x 5.85 x 8.11 in (42.9 x 150 x 195 mm)
2.64 lb (1.2 kg)
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
Page 33
QuickSpecs
HP ProLiant ML110 Generation 6
Technical Specifications
Embedded NC107i PCIe Network Interface
Gigabit Server Adapter
(Embedded)
Integrated 10/100/1000BASE-T Transceiver
Combines a triple-speed IEEE 802.3TM - Compliant Media Access
Controller (MAC) with a triple-speed Ethernet transceiver.
Data Transfer Method Compliant to x1 PCIe Specification
Controller
BCM5723
Network Transfer Rate 10Base-T (Half-Duplex) 10 Mb/s
10Base-T (Full-Duplex) 20 Mb/s
100Base-TX (Half100 Mb/s
Duplex)
100Base-TX (Full200 Mb/s
Duplex)
1000Base-TX (Half and 2000Mb/s
Full-Duplex)
Connector
RJ-45 connector
Cable Support
Performs all the physical layer functions for 10BASE-T, 100BASE-T,
and 1000BASE-T Ethernet on standard Category 5 UTP
Environment-friendly
Products and
Approach
End-of-life
Management and
Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and
recycling programs in many geographic areas. For trade-in information,
please go to: http://www.hp.com/go/green. To recycle your product,
please go to: http://www.hp.com/go/green or contact your nearest HP
sales office. Products returned to HP will be recycled, recovered or
disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to
provide treatment information for each product type for use by treatment
facilities. This information (product disassembly instructions) is posted
on the Hewlett Packard web site at: http://www.hp.com/go/green. These
instructions may be used by recyclers and other WEEE treatment
facilities as well as HP OEM customers who integrate and re-sell HP
equipment.
© Copyright 2010 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon
Inside are trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
DA - 13477 Worldwide QuickSpecs — Version 15 — 12.17.2010
Page 34
Download PDF
Similar pages