XC-ES50/ES30 XC-ES50CE/ES30CE XC-EI50/EI30 XC

XC_ES50/30.QXP
99.12.20 11:30 AM
Page 1
B/W VIDEO CAMERA MODULE
XC-ES50/ES30
XC-ES50CE/ES30CE
XC-EI50/EI30
XC-EI50CE/EI30CE
Preliminary
Component/OEM
FEATURES
OUTLINE
The XC-ES50/50CE and XC-ES30/30CE are compact, light-weight
one-piece black and white camera modules incorporating the
latest 1/2" Interline (IT) CCD which produces new levels of
picture detail. With dimensions of 29mm x 29mm x 32mm, these
units can easily be installed in places where installation was
previously difficult for other larger cameras.
Similar to the XC-ES50/ES30 cameras, the XC-EI50/50CE and
XC-EI30/30CE cameras also have near-infrared sensitivity.
When used with an IR LED illuminator, these cameras can
capture clear images in very low light environments. All four
models have identical dimensions and controls, making it easy
to interchange them. A variety of settings are available for
differing subject and lighting conditions. All camera control
switches are accessible from the outside of the camera.
Excellent vibration and shock characteristics make these
cameras ideal for demanding machine vision applications.
●
●
●
●
●
●
●
●
●
●
●
●
XC-ES50/EI50/CE: 1/2" IT CCD
XC-ES30/EI30/CE: 1/3" IT CCD
Small and light weight: 29mm x 29mm x 32mm, 60g
Infrared capability (XC-EI50/EI50CE, XC-EI30/EI30CE)
Sensitivity at F1.4
0.3 lx (XC-ES50/ES50CE, XC-ES30/ES30CE)
0.1 lx (XC-EI50/EI50CE)
0.2 lx (XC-EI30/EI30CE)
High S/N Ratio: 60 dB
Flexible trigger shutter functions
2:1 interlace/non-interlace
Frame/field exposure
Restart/Reset function
Synchronization: internal/external (HD/VD, VS)
High shock and vibration tolerance
ACCESSORIES
Compact camera adaptor
12 pin camera cable (CE standard)
Tripod adaptor
DC-700/700CE
CCXC-12P02N (2m)
VCT-ST333I
● Compact, lightweight
(700 g)
CCXC-12P05N (5m)
● Two video outputs
CCXC-12P10N (10m)
● External sync IN / OUT
CCXC-12P25N (25m)
● Isolated type
● Approx. 6.1 g
● Dimensions:
27(W)x18(H)x25(D)mm
● Trigger input / WEN output
● New EIAJ standard 12 pin connector
● Dimensions: 110(W) x 53(H) x 160(D) mm
XC_ES50/30.QXP
99.12.20 11:30 AM
Page 2
SPECIFICATIONS
XC-ES50
Image device
XC-ES50CE
1/2"
XC-ES30
IT CCD
XC-ES30CE
1/3"
XC-EI50
IT CCD
XC-EI50CE
1/2"
XC-EI30
IT CCD
XC-EI30CE
1/3"
IT CCD
Effective picture elements
768 (H) x 494 (V)
752 (H) x 582 (V)
768 (H) x 494 (V)
752 (H) x 582 (V)
768 (H) x 494 (V)
752 (H) x 582 (V)
768 (H) x 494 (V)
752 (H) x 582 (V)
Signal system
EIA (standard)
CCIR (standard)
EIA (standard)
CCIR (standard)
EIA (standard)
CCIR (standard)
EIA (standard)
CCIR (standard)
15.734 kHz
15.652 kHz
15.734 kHz
15.652 kHz
15.734 kHz
15.652 kHz
15.734 kHz
15.652 kHz
59.94 Hz
50 Hz
59.94 Hz
50 Hz
59.94 Hz
50 Hz
59.94 Hz
50 Hz
8.4 x 9.8 µm
8.6 x 8.3 µm
6.35 x 7.4 µm
6.5 x 6.25 µm
8.4 x 9.8 µm
8.6 x 8.3 µm
6.35 x 7.4 µm
6.5 x 6.25 µm
560 TV lines
570 TV lines
560 TV lines
Horizontal frequency
Vertical frequency
Cell Size
Lens mount
C mount
Flange back
17.526 mm
Sync system
Internal / External (auto)
External Sync system
HD / VD (2 ~ 5 Vp-p), VS
External Sync frequency
+/- 1%
Jitter
less than +/- 50 nsec
Scanning system
2:1 Interlaced
1.0 Vp-p, negative, 75 Ω unbalanced
Video output
Horizontal resolution
570 TV lines
Minimum illumination*
560 TV lines
570 TV lines
0.3 lx
560 TV lines
570 TV lines
0.3 lx
0.1 lx
S/N ratio
0.2 lx
60 dB
Gain
AGC (0-18 dB) / Manual (0-18 dB) Selectable
Gamma
ON / OFF
1/100
Normal shutter
External trigger shutter
1/4
~ 1/10,000 s
1/120
~ 1/10,000 s
1/4
~ 1/10,000 s
1/100
~ 1/8,000 s
1/4
~ 1/10,000 s
1/120
~ 1/10,000 s
1/4
Power requirements
~ 1/10,000 s
1/100
~ 1/8,000 s
1/4
~ 1/10,000 s
1/120
~ 1/10,000 s
1/4
~ 1/10,000 s
~ 1/8,000 s
1/100
1/4
~ 1/10,000 s
1/120
~ 1/10,000 s
1/4
~ 1/10,000 s
~ 1/8,000 s
DC12 V (+9 ~ 16 V)
Power consumption
1.6 W
1.4 W
1.6 W
1.4 W
29 (W) x 29 (H) x 32 (D) mm (1 3/16 x 1 3/16 x 1 5/16 inches)
Dimensions
Mass
60 g (2 oz)
Operation temp./mois.
-10 ~ +50°C / 20 ~ 80%
Storage temp./mois.
-20 ~ +60°C / 20 ~ 95%
Vibration
10 G (20 ~ 200 Hz)
Shock resistance
70 G
Regulations
UL1492, FCC Class A Digital Device, CE (EN50081-2 + EN50082-2), AS4251.1 + AS4252.2
Supplied accessories
Lens mount cap (1), Operating instructions (1)
* (F1.4, AGC ON, without IR cut filter)
DIMENSIONS & REAR PANEL
29
12 pin multi-connector
Manual GAIN control
C
29
29
5
0.
0.
5
C
Mode select switch
6.5
29
10
Dip switch 1 - 4 : Shutter speed
Dip switch 5 :
FRAME / FIELD
Dip switch 6 - 8 : External trigger
shutter mode, restart,
reset mode
Dip switch 9 :
Gamma ON / OFF
Dip switch 10 :
GAIN (AGC, Manual)
5.5
32
C
0.
29
12
5
Internal / External sync switch
6.5
22
75 Ω termination select switch (75 Ω / High)
Unit:mm
●
Sony Electronics Inc. (USA) HQ
1 Sony Drive Park Ridge, NJ 07656
●
●
Sony of Canada Ltd. (CANADA)
Sony Broadcast & Professional Europe HQ
115 Gordon Baker Rd, Toronto, Ontario M2H 3R6
15, rue Floreal F-75831 Paris Cedex 15, France
Germany
France
UK
Nordic
Italy
MK7495V1IW99DEC
Hugo-Eckener-Strasse 20 D-50829 Koln
15, rue Floreal F-75831 Paris Cedex 15
The Heights, Brooklands, Weybridge, Surrey KT13 0XW
Per Albin Hanssons vag 20 S-214 32 Malmo Sweden
Via Galileo Galilei 40 I-20092 Cinisello Balsamo, Milano
http://www.sony.co.jp/ISP/
(TEL:+1-800-686-7669)
http://www.sony.com/professional
(TEL:+1-416-499-1414)
(FAX:+1-416-497-1774)
(TEL:+33-1-55-90-35-11)
(FAX:+33-1-55-90-35-17)
http://www.pro.sony-europe.com
(TEL:+49-221-5966-322)
(FAX:+49-221-5966-491)
(TEL:+33-1-55-90-41-58)
(FAX:+33-1-55-90-42-20)
(TEL:+44-990-331122)
(FAX:+44-1932-817011)
(TEL:+46-40-190-800)
(FAX:+46-40-190-450)
(TEL:+39-2-618-38-431)
(FAX:+39-2-618-38-402)
©1999 Sony Corporation. All rights reserved.
Reproduction in whole or in part without written permission is prohibited.
Design and specifications are subject to change without notice.
Printed in Japan.
Download PDF
Similar pages