HP ProLiant BL460c Generation 6 Server Blade

QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Overview
HP ProLiant BL460c G6 Server Blade
1. Two (2) mezzanine I/O expansion slots
5. Two (2) small form factor (SFF) hot-plug drive bays
2. Internal USB connector
6. Local I/O Connector
3. Twelve (12) DDR3 Registered or Unbuffered DIMM
7. Internal SD card slot
Memory Slots
8. Up to two (2) Intel® Xeon® 5500 series processors
4. HP Smart Array P410i Controller
9. Access Panel
At A Glance
This document covers the HP ProLiant BL460c G6 server blade only. For more information on HP BladeSystems c-Class
Infrastructure and HP BladeSystem c-Class Interconnect Components, please see the following QuickSpecs:
HP BladeSystem c-Class Enclosures QuickSpecs:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html
HP BladeSystem c-Class Interconnect Components QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12524_div/12524_div.html
The HP ProLiant BL460c G6 provides greater 2P x86 server blade density without compromise and maximum powerefficiency with flexibility and choice.
HP ProLiant BL460c G6 server blade includes:
Processor:
Up to two (2) Intel® Xeon® 5500 Series processors, up to 2.93GHz
Intel® 5500 Chipset
DA - 13238 Worldwide QuickSpecs — Version 2 — 4.3.2009
Page 1
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Overview
Memory:
Twelve (12) DIMM slots
Up to 96GB, using PC3-8500 DDR3Registered (RDIMM) memory, operating at 1066MHz when fully populated
at 2 DIMMs per Channel in 12 slots
Up to 24GB, using PC3-10600 DDR3Unbuffered (UDIMM) memory, operating at 1066MHz when fully populated
at 2 DIMMs per Channel in 12 slots
Storage Controller:
HP Smart Array P410i Controller (RAID 0/1)
Internal Drive Support:
Up to two (2) small form factor (SFF) SAS or SATA hot plug hard disk drives
Network Controller:
Embedded NC532i Dual Port Flex-10 10GbE Multifunction Server Adapter
NOTE: Each port is autosensing 1 Gb/10Gb, and can interoperate with 1Gb HP BladeSystem c-Class
interconnect components.
One (1) additional 10/100 server adapter dedicated to iLO 2 Management
Mezzanine Support:
Two (2) I/O expansion mezzanine slots
Supports up to (2) mezzanine cards
Dual-Port Fibre Channel Mezzanine options for SAN connectivity (Choice of Emulex or QLogic)
iSCSI Ethernet mezzanine option for optimized iSCSI connectivity
Ethernet server adapter mezzanine options for additional network ports
4X DDR InfiniBand (IB) Mezzanine (20 Gb/s) options for low latency server interconnectivity (based on
Mellanox technology)
Ports:
One (1) internal USB 2.0 connector for security key devices and USB drive keys
One (1) internal SD-HC Card slot
Security - Trusted Platform Module:
One (1) internal TPM 1.2 module connector
VMware ESX Server 3i and Citrix XenServer virtualization technology:
Integrated Hypervisors: (Optional)
VMware ESX Server 3i virtualization technology
Citrix XenServer virtualization technology
Form Factor:
HP ProLiant BL460c G6 is a half-height server blade that plugs into the HP BladeSystem c3000 and c7000
enclosures
Management:
HP ProLiant Onboard Administrator (powered by the Integrated Lights-Out 2 management processor) provides
virtual KVM graphical remote console, virtual media, simplified server setup, and core server control functions
out of the box.
Unlock the full capabilities of the HP ProLiant Onboard Administrator with iLO Advanced for BladeSystem to
take advantage of capabilities such as boot and failure sequence replay, on-demand video record and playback,
and multi-user console for up to four users. Learn more at www.hp.com/go/iLO
HP Insight Control suite delivers essential management, including proactive health management, lights out
remote control, optimization of power usage, rapid server deployment, performance analysis, vulnerability
scanning and patch management and virtual machine management. Now with Dynamic Power Capping
technology, ICE can potentially triple the capacity of your data center by reclaiming trapped power and cooling
capacity. For more information, go to: www.hp.com/go/ice
Operating Systems:
Supports Windows, RHEL, SLES, OEL, Solaris, NetWare, VMware, and Citrix XenServer
Enclosures:
HP offers three different c-Class server blade enclosures to meet your individual needs:
The HP BladeSystem c7000 rack enclosure is 10U high and holds up to sixteen (16) ProLiant BL460c G6
servers plugged vertically.
The HP BladeSystem c3000 rack enclosure is 6U high and holds up to eight (8) HP ProLiant BL460c G6
servers plugged horizontally.
The HP BladeSystem c3000 tower enclosure is designed with casters for sites without racks and holds up
to eight (8) HP ProLiant BL460c G6 servers plugged vertically.
Server blades, storage blades, interconnect modules, power supplies, fans, and redundant Onboard
DA - 13238 Worldwide QuickSpecs — Version 2 — 4.3.2009
Page 2
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Overview
Administrator modules are all designed to fit into the c3000 and c7000 enclosures.
For additional enclosure information, please see:
http://h18004.www1.hp.com/products/blades/components/enclosures/c-class/index.html.
Warranty:
This product is covered by a global limited warranty and supported by HP Services and a worldwide network of
HP Authorized Channel Partners. Hardware diagnostic support and repair is available for three years from date
of purchase. Support for software and initial setup is available for 90 days from date of purchase.
Enhancements to warranty services are available through HP Care Pack services or customized service
agreements. Certain restrictions and exclusions apply. SATA hard drives have a one year warranty. SAS drives
have a 3 year warranty.
NOTE: Server warranty includes 3 year Parts, 3 year Labor, 3-year on-site support. Warranty repairs may be
accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1)
Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers
decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but
may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge.
Additional information regarding worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
DA - 13238 Worldwide QuickSpecs — Version 2 — 4.3.2009
Page 3
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Standard Features
Processor
Quad-Core Processors
Intel® Xeon® Processor X5570 (2.93 GHz, 8MB L3 Cache, 95W, DDR3-1333, HT, Turbo 2/2/3/3)
Intel® Xeon® Processor X5560 (2.80 GHz, 8MB L3 Cache, 95W, DDR3-1333, HT, Turbo 2/2/3/3)
Intel® Xeon® Processor X5550 (2.66 GHz, 8MB L3 Cache, 95W, DDR3-1333, HT, Turbo 2/2/3/3)
Intel® Xeon® Processor E5540 (2.53 GHz, 8MB L3 Cache, 80W, DDR3-1066, HT, Turbo 1/1/2/2)
Intel® Xeon® Processor E5530 (2.40 GHz, 8MB L3 Cache, 80W, DDR3-1066, HT, Turbo 1/1/2/2)
Intel® Xeon® Processor E5520 (2.26 GHz, 8MB L3 Cache, 80W, DDR3-1066, HT, Turbo 1/1/2/2)
Intel® Xeon® Processor E5506 (2.13 GHz, 4MB L3 Cache, 80W, DDR3-800)
Intel® Xeon® Processor E5504 (2.00 GHz, 4MB L3 Cache, 80W, DDR3-800)
Intel® Xeon® Processor L5520 (2.26 GHz, 8MB L3 Cache, 60W, DDR3-1066, HT, Turbo 1/1/2/2)
Intel® Xeon® Processor L5506 (2.13 GHz, 4MB L3 Cache, 60W, DDR3-800)
Dual-Core Processors
Intel® Xeon® Processor E5502 (1.86 GHz, 4MB L3 Cache, 80W, DDR3-800)
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using Intel® Turbo
Boost Technology, with 4, 3, 2, and 1 cores active.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may
depend on the quantity and type of DIMMs installed.
NOTE: For the Intel 5500 Series, the letter preceding the model number indicates the
performance/wattage of the processor. "X" denotes High Performance/Wattage; "E" denotes
Enterprise Performance/Wattage (Mainstream); and "L" denotes Lower Wattage.
Upgradeability
Upgradeable to two (2) processors
Cache Memory
4MB shared L3 cache
8MB shared L3 cache
Chipset
Intel® 5500 Chipset
Memory
Type
DDR3 Registered (RDIMM) or Unbuffered (UDIMM)
Standard
6 GB (3 x 2GB) RDIMM
Maximum(RDIMM)
96GB (12 x 8 GB) for Registered Memory configurations
Maximum (UDIMM)
24 GB (12 x 2 GB) for Unbuffered Memory configurations
NOTE: Depending on the memory configuration and processor model the memory speed may run at
1333MHz, 1066MHz or 800MHz. Please see the Online Memory Configuration Tool for details:
www.hp.com/go/ddr3memory-configurator
DDR3 memory options part number decoder
DA - 13238 Worldwide QuickSpecs — Version 2 — 4.3.2009
Page 4
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Standard Features
Network Controller
Embedded NC532i Dual Port Flex-10 10GbE Multifunction Server Adapter
One (1) additional 10/100 NIC dedicated to iLO 2 Management
I/O Expansion Slots
Two (2) I/O expansion mezzanine slots (x8 PCI Express)
Integrated
Manageability
ProLiant Onboard Administrator (powered by the Integrated Lights-Out 2 management processor)
Storage Controller
Type
HP Smart Array P410i Controller (RAID 0/1)
Available Options: 256MB cache, Battery-Backed Write Cache (BBWC) module for 256MB cache,
512MB cache with Battery Backed Write Cache (BBWC), and Smart Array Advanced Pack.
NOTE: 3Gb (6Gb Capable) SAS / 1.5Gb (3Gb Capable) SATA.
NOTE: Supports two (2) Small Form Factor (SFF) Hot Plug drive bays.
Maximum Internal
Storage
Hot Plug SAS
Hot Plug SATA
Graphics
Integrated ATI RN-50 1600x1280x64K 16M color (32 MB DDR1 memory)
Graphics Resolution
Supported
Resolution Color Depths 1600 x 1280, 64K, 256, 16
1280 x 1024, 16.7M, 64k, 256, 16
1024 x 768, 16.7M, 64k, 256,16
800 x 600, 16.7M, 64k, 256, 16
640 x 480, 16.7M, 64k, 256, 16
600GB
500GB
2 x 300GB Serial SCSI
2 x 250GB Serial ATA
DA - 13238 Worldwide QuickSpecs — Version 2 — 4.3.2009
Page 5
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Standard Features
Fibre Channel Support Two (2) optional Fibre Channel HBAs are supported by the HP ProLiant BL460c G6. Both
mezzanine circuit boards connect directly to the server blade system board. These Fibre Channel
HBAs are available via option kits and must be ordered separately.
Emulex LPe1105-HP 4Gb FC HBA for HP c-Class BladeSystem (403621-B21)
Based on the same field-proven ASIC, firmware, and driver technology as Emulex's
renowned LPe1150 HBA, the Emulex LPe1105-HP is fully driver compatible with all Emulex
HBAs
QLogic QMH2462 4Gb FC HBA for HP c-Class BladeSystem (403619-B21)
Uses common drivers which means that customers can standardize on one QLogic driver
whether they are using the QMH2462 or other 4Gb and 2Gb HBAs powered by QLogic
Emulex and QLogic Fibre Channel HBAs feature:
Optimal performance utilizing PCI Express
4/2/1Gb/s auto negotiating speeds
Dual-ports for redundant path connections
Up to two FC HBAs per server blade providing redundant FC HBA support
Optimized for HP StorageWorks and supported by third party SAN vendors
Support for Microsoft® Windows® and Linux operating systems environments
Compatible SAN
HP ProLiant BL460c G6 server blades are optimized for HP StorageWorks MSA, EVA and XP.
HP ProLiant 460c G6 server blades are compatible with select 3rd party SANs (please see blade
storage page for more details: http://h18000.www1.hp.com/products/servers/proliant-bl/cclass/storage.html
HP Insight Control
suite
HP Insight Control suite delivers essential management for HP BladeSystem lifecycles, including
proactive health management, lights out remote control, optimization of power usage, rapid server
deployment, performance analysis, patch management and virtual machine management.
HP Insight Control suite installs and licenses the following components by default using a wizardbased integrated installer:
HP Systems Insight Manager
HP iLO Advanced for BladeSystem or iLO Advanced
NOTE: iLO Advanced license will be enable when ICE is purchased as standalone software
HP Insight Power Manager software
HP Insight Rapid Deployment software
HP Insight Performance Manager module
HP Insight Vulnerability and Patch Manager module
HP Insight Virtual Machine Manager software for ProLiant
NOTE: The Insight Control Environment for BladeSystem suite is no longer being sold as
standalone software. You can continue to purchase Insight Control Environment for BladeSystem
with the c-Class enclosure as before. For standalone software, you can purchase the Insight
Control suite starting January 26, 2009. The standalone Insight Control suite license will license
HP ProLiant ML, DL and BL servers.
ICE standalone license covers iLO Advanced, SIM, RDP, IPM, PMP, VPM, VMM
ICE license purchased with a c-Class enclosure covers iLO Advanced for BladeSystem,
SIM, RDP, IPM, PMP, VPM and VMM
Additional Insight Software products included on the Insight Software media kit can be installed
manually:
DA - 13238 Worldwide QuickSpecs — Version 2 — 4.3.2009
Page 6
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Standard Features
HP Insight Server Migration software for ProLiant
NOTE: HP Insight Server Migration software for ProLiant is licensed separately from the
Insight Control Environment Suite. HP Insight Remote Support Standard
HP Insight Remote Support Advanced (previously Service Essentials Remote Support
Pack)
NOTE: HP Insight Server Migration software for ProLiant can be installed from the SMP-Universal
CD included in the Insight Software media kit.
NOTE: HP Insight Control suite can be installed from the Insight Software DVDs, which can be
delivered with HP BladeSystem c-Class enclosures with a choice of licensing options. Licensing
options include a free 30 day evaluation license for 8 servers (default option for every enclosure
order), a full purchased license for 8 blade servers or a full purchased license for 16 blade
servers). For additional information on HP c-Class Infrastructure please visit HP BladeSystem cClass Enclosures QuickSpecs:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html
NOTE: For additional product and licensing information about Insight Control suite, HP Systems
Insight Manager and Insight Software refer to: http://www.hp.com/servers/proliantessentials.
HP Insight Control Environment for Linux (ICE-Linux) provides comprehensive discovery, imaging
& deployment, monitoring, and management for Linux-based ProLiant server platforms. Built on
the industry-leading HP Systems Insight Manager framework, this solution integrates open source
technology with experience leveraged from HP's Linux products in HP ICLE and HP XC Clusters,
while providing paths to the future with developing management technologies.
NOTE: As of February. 1, 2009, HP iLO Power Management Pack for BladeSystem is being
discontinued. Customer can either purchase HP Insight Control suite which contains all the
components of IPMP or the standalone components: iLO Advanced, HP Insight Power Manager
software and HP Systems Insight Manager.
HP Insight Control suite and most Insight Software products include one year of 24 x 7 HP
Software Technical Support and Update Service ensuring rapid access to HP support staff and
proactive delivery of software updates. From more information about this service, please visit:
http://www.hp.com/services/insight.
HP ProLiant Onboard
Administrator
HP ProLiant Onboard Administrator (powered by the Integrated Lights-Out 2 management
processor) simplifies server setup, health monitoring, power and thermal control, and lights-out
remote administration of ProLiant ML, DL, and BL servers. HP ProLiant Onboard Administrator
functions without additional software, and can be accessed from any location via a web browser. It
works hand-in-hand with the HP BladeSystem Onboard Administrator, HP Systems Insight
Manager, Insight Control, and Insight Dynamics- VSE suite helping customers unlock the value of
the ProLiant platform and deliver the highest possible quality of IT service to the business.
Capabilities of the HP ProLiant Onboard Administrator embedded in ProLiant BL servers include,
but are not limited to the following:
Rom-based Setup Utility (RBSU) and Option Rom Configuration for Arrays (ORCA)
IML and iLO event logging
Automatic Server Recover (ASR)
OS independent hardware health status
Present server power consumption
Virtual Unit ID control
Virtual KVM based remote console
Virtual media (single server, browser based access only)
DA - 13238 Worldwide QuickSpecs — Version 2 — 4.3.2009
Page 7
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Standard Features
Remote serial console
Virtual power button control
Dynamic Sector Repairing (with Smart Array controller)
Drive Parameter Tracking (with Smart Array controller)
Integrated remote console (ActiveX Control client)
Single Sign-on from BladeSystem Onboard Administrator
Unlock the full capabilities of the HP ProLiant Onboard Administrator with iLO Advanced for
BladeSystem.
Server Management HP Systems Insight
Stand Alone Software Manager
Products
iLO Advanced for
BladeSystem
HP Insight Rapid
Deployment Software
Insight Power Manager
software (IPM)
HP Insight Dynamics VSE suite for ProLiant
HP Systems Insight Manager (HP SIM) provides a unified, secure and
extensible standards-based environment to centrally manage servers,
storage and other infrastructure devices, (both HP and non-HP) across
multiple operating system platforms.
For additional information, please see: http://www.hp.com/go/insight.
Unlock the full capabilities of the ProLiant Onboard Administrator with
enhanced console sharing and replay, virtual media (floppy, CD/DVD,
USB key), virtual folders, historical power reporting, power capping and
enterprise security (directory services and two-factor authentication) for
servers managed using remote consoles available in iLO 2 Standard
Blade Edition.
For additional information, please see: www.hp.com/go/iLO
HP Insight Rapid Deployment Software (RDP) extends HP Systems
Insight Manager with a complete deployment solution for HP ProLiant
blade servers. RDP provides a central location to configure server
hardware, deploy Windows, Linux and VMware ESX operating
environments and install HP ProLiant Support Pack drivers using
images and scripted profiles.
For more information, visit: http://www.hp.com/go/rdp.
Upgrades the single-server remote management capabilities of iLO
Advanced for BladeSystem to include centralized reporting and policybased management of power consumption and thermal output provided
by the Insight Power Manager. IPM unifies all of this functionality within
a single user interface - HP Systems Insight Manager.
For additional information, please see: www.hp.com/go/ipm.
The HP Insight Dynamics - VSE suite for ProLiant is advanced
infrastructure management software that allows you to analyze and
optimize your adaptive infrastructure to manage physical and virtual
resources in the same way. HP Insight Dynamics - VSE gives you a
powerful toolkit to accelerate complex technology projects and simplify
daily operations. It enables you to plan capacity and power continuously,
balance across physical and virtual resources, ensure cost-effective
high availability and provision infrastructure consistently.
HP Insight Orchestration, an optional extension to Insight Dynamics VSE, enables IT organizations to provision infrastructure consistently
and automatically from pools of shared resources using a self-service
portal. Resources provisioned can range from a single virtual machine
to complex multi-tier environments and their associated physical and
virtual resource requirements. HP Insight Recovery, also an optional
extension for Insight Dynamics - VSE, enables cost-effective disaster
recovery for physical and virtual environments. Application
environments can be reactivated in minutes with the touch of a button to
a remote location
NOTE: For more information, visit:
DA - 13238 Worldwide QuickSpecs — Version 2 — 4.3.2009
Page 8
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Standard Features
HP Insight Server
Migration software for
ProLiant
http://www.hp.com/go/insightdynamics,
http://www.hp.com/go/insightorchestration,
http://www.hp.com/go/insightrecovery
Upgrading, replacing, or virtualizing your existing server? Effortlessly
transition to new virtual or physical HP ProLiant servers or BladeSystem
with automated, accurate and affordable migration of OS, application
and data. SMP Universal automates the manual processes required for
migrating servers between physical or virtual platforms, whether
migrating to VMware or Microsoft virtual machines. SMP Universal
allows all of the following migrations:
physical to ProLiant
physical to virtual
virtual to virtual
virtual to ProLiant
HP Virtual Machine
Manager software for
ProLiant
Core Infrastructure
Management
HP ProLiant Essentials
Foundation Pack
NOTE: For more information, visit: http://www.hp.com/go/migrate.
HP Insight Virtual Machine Manager software - provides central
management and control of virtual machines from Microsoft and
VMware. Integrated approach provides the ability to manage both
physical and virtual resources from a single management console.
For additional information, please see: www.hp.com/go/vm-manage.
NOTE: Flexible and volume quantity license kits are available for Insight
Software products. Refer to: http://www.hp.com/go/insightcontrol or the
various Insight Software product QuickSpecs for more information.
Managing the growing number of servers can be complex and
expensive for your organization. IT managers need to address changing
business needs with tools that meet the challenges of managing today's
complex Datacenters.
HP provides management solutions that are designed to simplify a
server's installation, configuration and maintenance throughout the
entire server lifecyle. This provides the customer with higher levels of
operational efficiency and highly reliable systems:
www.hp.com/go/foundation.
The foundation pack includes:
HP SmartStart
HP Management
HP ProLiant Firmware Maintenance
Insight Management
Providers (WBEM)
SmartStart version supported (minimum): SmartStart 8.20
http://www.hp.com/servers/smartstart
The HP Insight Management WBEM Providers leverage the rich set of
base-level instrumentation provided by the system management
controllers and drivers, I/O controllers and drivers, and system firmware
interfaces delivering in-depth hardware management, including
hardware inventory data, system state, and event notifications.
Key Benefits Include:
Heightened Security
Single integrated Security Model
Built using industry standard secure protocols and
encryption algorithms (SSL, SSH)
Reduce the number of entry points into internal network
DA - 13238 Worldwide QuickSpecs — Version 2 — 4.3.2009
Page 9
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Standard Features
Reduced complexity of setup and configuration
Delivers standards-based management across vendor platforms
Robust in-depth and usable data that is provided to the HP
System Management Homepage and Central Management
Console
Guaranteed event delivery
Reduces overall load on the server by smaller agent footprint and
maintenance burden
Provides in-depth hardware management, inventory data, system
state, and event notifications
The Insight Management Providers are included on ProLiant Support
Packs.
Insight Management
Agents (SNMP)
For additional information about the Management Providers please visit:
http://www.hp.com/go/HPwbem
The Insight Management Agents should be installed on all HP servers to
present system instrumentation, health and configuration information
into HP Systems Insight Manager and the HP System Management
Homepage. The HP System Management Homepage aggregates
systems data from Insight Management Agents and other HP
management tools, providing a consolidated browser-based interface for
managing individual servers.
Insight Management Agents and The HP System Management
Homepage are included on ProLiant Support Packs, and can also be
installed using the server profiles provided with the HP Insight Rapid
Deployment software.
For additional information about the Management Agents and the HP
System Management Homepage please visit the management Web site
at: http://www.hp.com/servers/manage.
Subscriber's Choice
Subscriber's Choice Driver and Support Alerts/Notifications is a webbased email subscription service that provides software and driver
change notifications for ProLiant products. Sign up at:
http://www.hp.com/go/subscriberschoice
and customize your profile to receive various new alerts as they become
available, on a weekly or monthly basis.
ProLiant Support Packs The latest software, drivers, and firmware fully optimized and tested for
and ROMPaq software your ProLiant server and options, available through ProLiant Support
Packs the HP Insight Rapid Deployment software, SmartStart or
downloaded from software and drivers download pages website at:
http://www.hp.com/go/support.
DA - 13238 Worldwide QuickSpecs — Version 2 — 4.3.2009
Page 10
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Standard Features
HP Serviceguard for
Linux (SGLX)
HP Serviceguard for Linux is a high availability clustering solution designed to protect applications
and services from a wide variety of software and hardware failures, monitoring the health of each
server (node) and quickly responding to failures such as those that affect system processes,
system memory, LAN media and adapters, and application processes.
The following is a quick summary of HP Serviceguard for Linux features and support. For the most
recent list of Linux distributions & kernels, servers and storage supported with Serviceguard for
Linux, see the Serviceguard for Linux Datasheet, available at: http://www.hp.com/go/sglx/info.
Supported Linux Distributions:
Red Hat EL 4
Red Hat EL 5
SUSE SLES10
Supported Server Platforms
HP Integrity BladeSystem to Superdome
HP ProLiant BladeSystem p-Class & c-Class
HP ProLiant DL
HP ProLiant ML
IBM System x
Dell PowerEdge
Sun x64
Fujitsu Siemens PRIMERGY
Supported Virtual Machines
SG/LX in HP Integrity Virtual Machines guests
SG/LX in VMware ESX guests
SG/LX in Red Hat and SUSE Xen hosts (DOM0)
Application Integration Toolkits
HP Serivceguard for Linux Oracle Database Toolkit
HP Serviceguard Extension for SAP on Linux (SGeSAP/LX)
Free Application Integration Toolkits:
Apache
MySQL
NFS
PostgreSQL
Samba
Tomcat
Sendmail
Disaster Tolerant Solutions
HP Serviceguard for Linux Extended Distance Cluster (XDC) extends cluster
distances up to 100 km, utilizes software RAID mirroring for data replication and is
storage array independent
HP StorageWorks XP/EVA Cluster Extension Software for Linux (CLX) works
seamlessly with HP Serviceguard for Linux, HP StorageWorks Continuous Access,
and HP Disk Arrays to automate failover and failback between sites
Software updates are distributed by HP Services to customers with support contracts
NOTE: The above is not a complete list of all HP Serviceguard for Linux product numbers. For a
detailed list of supported configuration/certification options for HP Serviceguard for Linux, please
refer to the HP Serviceguard for Linux Configuration & Ordering Guide available at:
http://www.hp.com/go/sglx/info.
DA - 13238 Worldwide QuickSpecs — Version 2 — 4.3.2009
Page 11
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Standard Features
OS Support
Microsoft Windows Server
Microsoft Windows Server Hyper-V
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Oracle Enterprise Linux (OEL)
Solaris 10 for x86/x64 based Systems
VMware
HP Citrix Essentials for XenServer
NetWare
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and
Virtualization Software and latest listing of software drivers available for your server, please visit
our Support Matrix at: http://www.hp.com/go/ossupport and our driver download page
http://www.hp.com/support/BL460cG6
Availability
Industry Standard
Compliance
Security
Security - Trusted
Platform Module
Dual-Port Fibre Channel Mezzanine Card options for redundant SAN connection
Dual-port embedded 10 Gigabit Ethernet adapters for redundant LAN connections
Two (2) hot-plug SAS/SATA hard drive bays and integrated RAID (HP Smart Array P410i
Controller)
Optional Battery-backed write cache module for integrated RAID controller
Redundant ROM
Advanced ECC Memory
Support for Memory Mirroring and Memory Lock-Step Mode
Network adapter teaming (network fault tolerance, transmit load balancing, switch-assisted
load balancing)
ACPI 2.0 Compliant
PCI 2.2 Compliant
WOL Support
Microsoft® Logo certifications
USB 2.0 Support
Power-on password
Administrator's password
Integrated Lights-Out 2 has 12 customizable user accounts and SSL encryption
Integrated Lights-Out 2 can be disabled via a Global Setting
The TPM (Trusted Platform Module) is a microcontroller chip that can securely store artifacts used
to authenticate the server platform. These artifacts can include passwords, certificates and
encryption keys. Windows® BitLocker™ Drive Encryption (BitLocker) is a data protection feature
available in Windows Server® 2008. BitLocker leverages the enhanced security capabilities of a
Trusted Platform Module (TPM) version 1.2. The TPM works with BitLocker to help protect user
data and to ensure that a server running Windows Server 2008 has not been tampered with while
the system was offline.
NOTE: For more information about TPM, including a white paper, go to
http://www.hp.com/go/TPM
NOTE: ProLiant OS pre-installed units will come with the partition required for TPM deployment.
NOTE: The TPM key is unique to every TPM deployed server and must be retained. Misplacing or
losing the key could result in data loss.
DA - 13238 Worldwide QuickSpecs — Version 2 — 4.3.2009
Page 12
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Standard Features
Factory Express
Portfolio for Servers
and Storage
HP Factory Express offers configuration, customization, integration and deployment services for
HP servers and storage products. Customers can choose how their factory solutions are built,
tested, integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading,
asset tagging, and custom packaging. HP products supported through Factory Express include a
wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP
BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries
and configurable network switches.
For more information on Factory Express services on your specific server model please contact
your sales representative or go to: http://www.hp.com/go/factory-express.
HP Enterprise
Configurator
The HP e-Configure Enterprise Configurator now provides factory default racking for our HP
hardware portfolio. This approach is aligned with our strategic direction to meet the needs and
expectations of our valued customers. If you require "custom" rack configuration, please contact
HP's Customer Business Center or an Authorized Partner for assistance.
Service and Support
HP Care Pack services provide total care and support expertise with committed response
designed to meet your IT and business needs.
The HP Care Pack service for HP ProLiant BL c-Class server blades, cover the server blade and
all HP branded hardware options qualified for the server, purchased at the same time or
afterwards, internal to the server.
To fully capitalize on your HP BladeSystem servers' capabilities requires a service partner who
thoroughly understands your server technology and systems environment. HP Services, an
industry leader in provision of multi vender support solutions provides a range of support services
designed to meet the varying needs of business. Whether an SMB or large global corporation HP
has a HP BladeSystem server support offer to help you speedily deploy and maximize system
uptime.
Recommended Service - Simplify ProLiant solution implementation, maintenance and
management.
Support Service - 4-Hour Response Coverage, 3-Year, 24 x 7, Same Business Day
Deployment Service - Installation and Start Up for HP BladeSystem Infrastructure
Enhanced Service - Optimize service level to increase IT performance and availability
Support Service - HP Proactive BladeSystem Service, 1-Year
Deployment Service - Enhanced Network Installation and Start-up for HP BladeSystem
Switches
Installation & Start-Up service for HP BladeSystem Infrastructure plus HP BladeSystem Enhanced
Network Installation and Start-UP as per the Customer Description and/or Data Sheet. To be
delivered on a scheduled basis 8am-5pm, M-F, excluding HP holidays.
For a complete listing of service offerings and information visit:
http://www.hp.com/services/bladesystemservices
http://www.hp.com/go/proliant/carepack
DA - 13238 Worldwide QuickSpecs — Version 2 — 4.3.2009
Page 13
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Models
Quad-Core Models
HP BL460c G6 X5550
6GB (1P)
507778-B21
Processor(s)
One of the following
depending on model
HP BL460c G6 E5540
6GB (1P)
507779-xx1
HP BL460c G6 E5530
6GB (1P)
507780-B21
HP BL460c G6 E5520
6GB (1P)
507782-B21
HP BL460c G6 E5506
6GB (1P)
507783-B21
Cache Memory
Memory
Network Adapter
HP BL460c G6 E5502
6GB (1P)
507784-B21
Storage Controller
Hard Drives
Internal Storage
HP BL460c G6 L5520
6GB (1P)
507781-B21
Optical Drive
Form Factor
Country Code
XX=Worldwide
XX=Brazil
(1) Intel® Xeon® Processor X5550 (2.66 GHz, 8MB L3 Cache, 95W,
DDR3-1333, HT, Turbo 2/2/3/3)
(1) Intel® Xeon® Processor E5540 (2.53 GHz, 8MB L3 Cache, 80W,
DDR3-1066, HT, Turbo 1/1/2/2)
(1) Intel® Xeon® Processor E5530 (2.40 GHz, 8MB L3 Cache, 80W,
DDR3-1066, HT, Turbo 1/1/2/2)
(1) Intel® Xeon® Processor E5520 (2.26 GHz, 8MB L3 Cache, 80W,
DDR3-1066, HT, Turbo 1/1/2/2)
(1) Intel® Xeon® Processor E5506 (2.13 GHz, 4MB L3 Cache, 80W,
DDR3-800)
(1) Intel® Xeon® Processor L5520 (2.26 GHz, 8MB L3 Cache, 60W,
DDR3-1066, HT, Turbo 1/1/2/2)
(1) Intel® Xeon® Processor E5502 (1.86 GHz, 4MB L3 Cache, 80W,
DDR3-800)
4MB or 8MB shared L3 cache
6 GB (3 x 2 GB) PC3-10600 (DDR3-1333) Registered DIMMs
Embedded NC532i Dual Port Flex-10 10GbE Multifunction Server
Adapter and one (1) additional 10/100 server adapter dedicated to iLO 2
management
HP Smart Array P410i Controller (RAID 0/1)
None ship standard
SAS: 600GB (2 x 300GB SAS)
SATA: 500GB (2 x 250GB SATA)
None
Up to eight (8) half-height blades supported in the HP BladeSystem
c3000 Enclosure
Up to sixteen (16) half-height blades supported in HP BladeSystem
c7000 Enclosure
Rack Code Key
-B21
-201
DA - 13238 Worldwide QuickSpecs — Version 2 — 4.3.2009
Page 14
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on CTO product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order server blades must start with a CTO Blade.
NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Server Blade Configuration (Select a configurable Blade)
Models
HP ProLiant BL460c G6 CTO Blade
Configurable Model ships with:
Embedded NC532i Dual Port Flex-10 10GbE Multifunction Server Adapter and
one (1) additional 10/100 server adapter dedicated to iLO 2 management
Integrated Lights-Out 2 Standard Blade Edition
507864-B21
Step 2: Choose Required Options (one of the following from each list unless
otherwise noted)
Processors
For single processor configuration choose:
Quad-Core Processor Option Kits
Intel® Xeon® Processor X5570 (2.93 GHz, 8MB L3 Cache, 95W, DDR3-1333,
HT, Turbo 2/2/3/3) BL460c G6 Kit, FIO
NOTE: If two processors are desired, select one 507791-L21 and one 507791B21.
Intel® Xeon® Processor X5560 (2.80 GHz, 8MB L3 Cache, 95W, DDR3-1333,
HT, Turbo 2/2/3/3) BL460c G6 Kit, FIO
NOTE: If two processors are desired, select one 507792-L21 and one 507792B21.
Intel® Xeon® Processor X5550 (2.66 GHz, 8MB L3 Cache, 95W, DDR3-1333,
HT, Turbo 2/2/3/3) BL460c G6 Kit, FIO
NOTE: If two processors are desired, select one 507793-L21 and one 507793B21.
Intel® Xeon® Processor E5540 (2.53 GHz, 8MB L3 Cache, 80W, DDR3-1066,
HT, Turbo 1/1/2/2) BL460c G6 Kit, FIO
NOTE: If two processors are desired, select one 507794-L21 and one 507794B21.
Intel® Xeon® Processor E5530 (2.40 GHz, 8MB L3 Cache, 80W, DDR3-1066,
HT, Turbo 1/1/2/2) BL460c G6 Kit, FIO
NOTE: If two processors are desired, select one 507797-L21 and one 507797B21.
Intel® Xeon® Processor L5520 (2.26 GHz, 8MB L3 Cache, 60W, DDR3-1066,
HT, Turbo 1/1/2/2) BL460c G6 Kit, FIO
NOTE: If two processors are desired, select one 507798-L21 and one 507798B21.
Intel® Xeon® Processor E5520 (2.26 GHz, 8MB L3 Cache, 80W, DDR3-1066,
HT, Turbo 1/1/2/2) BL460c G6 Kit, FIO
NOTE: If two processors are desired, select one 507799-L21 and one 507799B21.
Intel® Xeon® processor HP L5506 (2.13 GHz, 4MB L3 Cache, 60W, DDR3-800)
BL460c G6 Kit, FIO
NOTE: If two processors are desired, select one 513859-L21 and one 513859B21.
DA - 13238 Worldwide QuickSpecs — Version 2 — 4.3.2009
507791-L21
507792-L21
507793-L21
507794-L21
507797-L21
507798-L21
507799-L21
513859-L21
Page 15
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Configuration Information - Factory Integrated Models
Memory
Intel® Xeon® processor HP E5506 (2.13 GHz, 4MB L3 Cache, 80W, DDR3-800)
BL460c G6 Kit, FIO
NOTE: If two processors are desired, select one 507800-L21 and one 507800B21.
Intel® Xeon® processor HP E5504 (2.00 GHz, 4MB L3 Cache, 80W, DDR3-800)
BL460c G6 Kit, FIO
NOTE: If two processors are desired, select one 507801-L21 and one 507801B21.
Dual-Core Processor Option Kits
Intel® Xeon® processor HP E5502 (1.86 GHz, 4MB L3 Cache, 80W, DDR3-800)
BL460c G6 Kit, FIO
NOTE: If two processors are desired, select one 507802-L21 and one 507802B21.
Registered DIMMS (RDIMMs)
HP 2GB 2Rx8 PC3-10600R -9 Kit
HP 4GB 2Rx4 PC3-10600R-9 Kit
HP 4GB 4Rx8 PC3-8500R-7 LP Kit
HP 8GB 2Rx4 PC3-8500R-7 Kit
Unbuffered with ECC DIMMs (UDIMMs)
HP 1GB 1Rx8 PC3-10600E-9 Kit
HP 2GB 2Rx8 PC3-10600E-9 Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3
Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Kits described as LP include Low Power DIMMs. For more information on
ProLiant Energy Efficient Features, see:
http://h18004.www1.hp.com/products/servers/platforms/energyefficient/
507800-L21
507801-L21
507802-L21
500656-B21
500658-B21
500660-B21
516423-B21
500668-B21
500670-B21
Step 3: Choose Additional Factory Integratable Options (one of the following from
each list unless otherwise noted)
VMware ESXi
NOTE: HP VMware ESXi free download from: www.software.hp.com - select
Virtualization.
HP VMware 3i Enterprise 2p Lic SW
NOTE: For additional information and options kits, please see the QuickSpecs
at: www.hp.com/go/vmware
HP Citrix Essentials for HP XenServer Select Edition free Download from:
XenServer
http://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?
productNumber
=HPXS
HP Essentials -XenServer Platinum Nm Lic
HP ProLiant Virtual Console Full License
XenServer HP Ent Upg iSW Lic
HP Citrix Essentials for XenServer Enterprise Edition
NOTE: For additional information and options kits, please see the HP Citrix
Essentials for XenServer QuickSpecs at: http://www.hp.com/go/citrix
DA - 13238 Worldwide QuickSpecs — Version 2 — 4.3.2009
430341-B21
530753-B21
508293-B21
464676-B21
508294-B21
Page 16
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Configuration Information - Factory Integrated Models
Storage Controller
256 MB Cache Module
Battery Kit Upgrade (for BBWC)
NOTE: Requires 256 MB Cache Module.
512 MB BBWC Cache Module
462968-B21
462969-B21
462967-B21
Step 4: Choose Additional Options for Factory Integration
NOTE: For additional options, including server blade enclosures interconnect options and power subsystem options; please
see the Core Options and Additional sections below; or the following QuickSpecs:
HP BladeSystem c-Class Enclosures QuickSpecs:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html
and HP BladeSystem c-Class Interconnect Components QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12524_div/12524_div.html.
DA - 13238 Worldwide QuickSpecs — Version 2 — 4.3.2009
Page 17
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Core Options
Ethernet Mezzanine
Options
Fiber Channel
Mezzanine Options
Gigabit Ethernet Mezzanines
HP NC325m PCI Express Quad Port 1Gb Server Adapter for c-Class
BladeSystem
NOTE: If the NC325m is installed in mezzanine slot 1 of a half-height server,
connectivity will be provided on 2 of the 4 ports.
HP NC326m PCI Express Dual Port 1Gb Server Adapter for c-Class
BladeSystem
HP NC360m Dual Port 1GbE BL-c Adapter
HP NC364m Quad Port 1GbE BL-c Adapter
NOTE: If the NC364m is installed in mezzanine slot 1 of a half-height server,
connectivity will be provided on only 2 of the 4 ports.
HP NC382m Dual Port 1GbE Multifunction BL-c Adapter
QLogic QMH4062 1Gb E iSCSI Adapter for HP BladeSystem c-Class
NOTE: The Gigabit Ethernet adapters above transmit from the server at 2000
Mbps, full duplex per port only. For more information, see the "Network
Controller" segment in the Standards Features section.
10 Gigabit Ethernet Mezzanines
416585-B21
406771-B21
445978-B21
447883-B21
453246-B21
488074-B21
HP NC512m Dual Port 10GbE Multifunction BL-c Adapter
NOTE: The NC512m is supported in type II x8 PCI Express mezzanine slots;
maximum two adapters per server. For more information, see the Mezzanine
Slot Compatibility matrix within the HP NC512m Dual Port 10GbE Multifunction
BL-c Adapter QuickSpecs:
http://h18004.www1.hp.com/products/servers/networking/nc512m/index.html.
NOTE: A minimum of 2 GB of server memory is required per NC512m and
supports a maximum of 32 GB for Windows and 64 GB for Linux.
NOTE: The NC512m adapter transmits from the server only at 20 Gbps, full
duplex per port.
HP NC532m Dual Port 10GbE BL-c Adapter
NOTE: The NC532m network adapter card is required for each server blade
connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000
Enclosure) or bays 3-4 (HP BladeSystem c3000 Enclosure).
NOTE: The NC532m requires a minimum of 2 GB of server memory.
NOTE: The NC532m will downspeed to 1Gb if paired with a 1Gb interconnect.
440910-B21
Emulex LPe1105 FC Dual Channel 4Gb, PCI-E-to-Fibre Channel Host Bus
Adapter
QLogic QMH2462 4Gb FC HBA for HP c-Class BladeSystem
403621-B21
DA - 13238 Worldwide QuickSpecs — Version 2 — 4.3.2009
467799-B21
403619-B21
Page 18
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Core Options
Processors
Memory
Quad-Core Process Option Kits
Intel® Xeon® Processor X5570 (2.93 GHz, 8MB L3 Cache, 95W, DDR3-1333,
HT, Turbo 2/2/3/3) BL460c G6 Kit
Intel® Xeon® Processor X5560 (2.80 GHz, 8MB L3 Cache, 95W, DDR3-1333,
HT, Turbo 2/2/3/3) BL460c G6 Kit
Intel® Xeon® Processor X5550 (2.66 GHz, 8MB L3 Cache, 95W, DDR3-1333,
HT, Turbo 2/2/3/3) BL460c G6 Kit
Intel® Xeon® Processor E5540 (2.53 GHz, 8MB L3 Cache, 80W, DDR3-1066,
HT, Turbo 1/1/2/2) BL460c G6 Kit
Intel® Xeon® Processor E5530 (2.40 GHz, 8MB L3 Cache, 80W, DDR3-1066,
HT, Turbo 1/1/2/2) BL460c G6 Kit
Intel® Xeon® Processor L5520 (2.26 GHz, 8MB L3 Cache, 60W, DDR3-1066,
HT, Turbo 1/1/2/2) BL460c G6 Kit
Intel® Xeon® Processor E5520 (2.26 GHz, 8MB L3 Cache, 80W, DDR3-1066,
HT, Turbo 1/1/2/2) BL460c G6 Kit
Intel® Xeon® processor HP L5506 (2.13 GHz, 4MB L3 Cache, 60W, DDR3-800)
BL460c G6 Kit
Intel® Xeon® processor HP E5506 (2.13 GHz, 4MB L3 Cache, 80W, DDR3-800)
BL460c G6 Kit
Intel® Xeon® processor HP E5504 (2.00 GHz, 4MB L3 Cache, 80W, DDR3-800)
BL460c G6 Kit
Dual-Core Process Option Kits
Intel® Xeon® processor HP E5502 (1.86 GHz, 4MB L3 Cache, 80W, DDR3-800)
BL460c G6 Kit
Registered DIMMS (RDIMMs)
HP 2GB 2Rx8 PC3-10600R -9 Kit
HP 4GB 2Rx4 PC3-10600R-9 Kit
HP 4GB 4Rx8 PC3-8500R-7 LP Kit
HP 8GB 2Rx4 PC3-8500R-7 Kit
Unbuffered with ECC DIMMs (UDIMMs)
HP 1GB 1Rx8 PC3-10600E-9 Kit
HP 2GB 2Rx8 PC3-10600E-9 Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3
Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Kits described as LP include Low Power DIMMs. For more information on
ProLiant Energy Efficient Features, see:
http://h18004.www1.hp.com/products/servers/platforms/energyefficient/
DA - 13238 Worldwide QuickSpecs — Version 2 — 4.3.2009
507791-B21
507792- B21
507793- B21
507794- B21
507797-B21
507798-B21
507799-B21
513859-B21
507800-B21
507801-B21
507802-B21
500656-B21
500658-B21
500660-B21
516423-B21
500668-B21
500670-B21
Page 19
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Core Options
Hard Drives
SAS Hot Plug SFF Enterprise (ENT) Drives
HP 300GB 6G SAS 10K SFF DP ENT HDD
HP 300GB 3G SAS 10K SFF DP HDD
HP 146GB 6G SAS 10K SFF DP ENT HDD
HP 146GB 3G SAS 10K SFF DP HDD
HP 146GB 3G SAS 15K SFF DP ENT HDD
HP 72GB 3G SAS 15K SFF DP HDD
HP 72GB 3G SAS 10K SFF DP HDD
HP 36GB 3G SAS 15K SFF DP HDD
NOTE: SAS drives have a 3 year warranty.
NOTE: Please see QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html
(Worldwide)
NOTE: The hard drive options are not required when configuring a Drive-less
Model.
SATA SFF Hot Plug Entry (ETY) Drives
HP 250GB 3G SATA 5.4K SFF ETY HDD
HP 120GB 1.5G SATA 5.4K SFF ETY HDD
NOTE: SATA drives have a 1 year warranty. Please see the QuickSpecs for
Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html
(Worldwide)
DA - 13238 Worldwide QuickSpecs — Version 2 — 4.3.2009
507127-B21
492620-B21
507125-B21
418367-B21
504062-B21
418371-B21
384842-B21
418369-B21
460355-B21
458924-B21
Page 20
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Additional Options
HP Insight Control
suite (ICE)
NOTE: Electronic licensing options are available for Insight Control suites
software products. Please see the appropriate Insight Control QuickSpecs for
additional information.
HP Insight Control suite
HP Insight Control suite, No Media 1-Server License including 1 year of 24x7
Technical Support and Updates
NOTE: Customer will receive a printed license entitlement certificate via physical
shipment. The license entitlement certificate must be redeemed online or via fax
in order to obtain the license activation key(s). Includes one year of 24 x 7 HP
Software Technical Support and Update Service.
HP Insight Software Media Kit
NOTE: Insight Software DVD media without licenses. Contains Insight Software
suites, standalone software products and components licensed by Insight
Control Environment suites. Uses an integrated installer to perform quick and
accurate software installation and updates.
NOTE: For additional License Kits, please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12631_div/12631_div.html
HP Insight Control Environment for Linux
HP Insight Control Environment for Linux, No Media, 1-Server license, including
one year of 24x7 Technical Support and Updates
NOTE: This part number can be used to purchase one (1) license with a single
activation key. Customer will receive a printed license entitlement certificate via
physical shipment. The license entitlement certificate must be redeemed online
or via fax in order to obtain the license activation key(s). Includes one year of 24
x 7 HP Software Technical Support and Update Service.
NOTE: One certificate is shipped for each license.
HP Insight Control Environment for Linux, Media pack (DVD) - No licenses
included
NOTE: This optional Media pack DVD contains the ISO image for HP Insight
Control Environment for Linux, HP System Insight Manager, HP Insight Power
Manager software, HP Virtual Machine Manager software for ProLiant, and an
integrated installer. Servers must be acquired separately.
NOTE: This Media pack is optional because the latest ISO image and latest
updates may be downloaded at no cost from: http://www.hp.com/go/ice-linux
(click on Download button).
NOTE: For additional License Kits, please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/13019_div/13019_div.html
Server Management NOTE: Electronic licensing options are available for Insight Control suites and
Stand Alone Software select Insight Software products. Please see the appropriate Insight Control and
Products
Insight Software product QuickSpecs for additional information.
Deploy
HP Insight Rapid Deployment software
HP Insight Rapid Deployment software, No Media 1-Server License including 1
year of 24x7 Technical Support and Updates
NOTE: This license allows 1 server to be deployed and managed via RDP.
Customer will receive a printed license entitlement certificate via physical
shipment. The license entitlement certificate must be redeemed online or via fax
in order to obtain the license activation key(s). Includes one year of 24 x 7 HP
Software Technical Support and Update Service.
NOTE: This license formerly known as ProLiant Essentials Rapid Deployment
Pack.
DA - 13238 Worldwide QuickSpecs — Version 2 — 4.3.2009
452148-B22
436222-B21
464423-B22
464422-B22
452151-B21
Page 21
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Additional Options
NOTE: For additional License Kits- please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11053_div/11053_div.html
HP Insight Server Migration software for ProLiant
HP Insight Server Migration software for ProLiant, No Media, Physical / Virtual to
ProLiant Single Migration License, including 1 year of 24x7 Technical Support
NOTE: This license allows 1 physical to ProLiant or virtual to ProLiant migration.
Customer will receive a printed license entitlement certificate and documentation
via physical shipment. The license entitlement certificate must be redeemed
online or via fax in order to obtain the license activation key(s). Includes one
year of 24 x 7 HP Software Technical Support Service.
HP Insight Server Migration software for ProLiant, No Media, Physical / Virtual to
Virtual Single Migration License, including 1 year of 24x7 Technical Support
NOTE: This license allows 1 physical to virtual or virtual to virtual migration.
Customer will receive a printed license entitlement certificate and documentation
via physical shipment. The license entitlement certificate must be redeemed
online or via fax in order to obtain the license activation key(s). Includes one
year of 24 x 7 HP Software Technical Support Service.
HP Insight Server Migration software for ProLiant, No Media, 1-Year Unlimited
Migration License, including 1 year of 24x7 Technical Support
NOTE: This license allows unlimited migrations (physical to ProLiant, physical to
virtual, virtual to virtual, and virtual to ProLiant) for one year. Customer will
receive a printed license entitlement certificate and documentation via physical
shipment. The license entitlement certificate must be redeemed online or via fax
in order to obtain the license activation key(s). Includes one year of 24 x 7 HP
Software Technical Support Service.
NOTE: For additional License Kits please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12855_div/12855_div.html
Monitor
HP Insight Dynamics - VSE suite for ProLiant
HP Insight Dynamics-VSE with Insight Control Environment, 1-server license
including 1 year of 24x7 Technical Support and Updates
NOTE: This license supports HP ProLiant ML/DL and c-Class Blade servers.
Customer will receive a printed license entitlement certificate via physical
shipment.
HP Insight Dynamics-VSE without Insight Control Environment, 1-server license
including 1 year of 24x7 Technical Support and Updates
NOTE: This license supports HP ProLiant ML/DL and c-Class Blade servers.
Customer will receive a printed license entitlement certificate via physical
shipment.
NOTE: For additional license kits, please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/13050_div/13050_div.html
Control
HP iLO Advanced for BladeSystem
HP Integrated Lights-Out Advanced for BladeSystem, No Media, 1-Server
License, including 1 year of 24x7 Technical Support and Updates
NOTE: For additional License Kits, please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12362_div/12362_div.html
Featuring: Sophisticated remote control and security features for HP
BladeSystem servers and ProLiant ML/DL servers.
NOTE: For additional License Kits please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12362_div/12362_div.html
Optimize
HP Insight Power Manager software (IPM)
DA - 13238 Worldwide QuickSpecs — Version 2 — 4.3.2009
460750-B21
460753-B21
460756-B21
483527-B21
483531-B21
512488-B21
Page 22
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Additional Options
HP Insight Power Manager, No Media, 1-Server License, including 1 year of
24x7 Technical Support and Updates
NOTE: Customers purchasing this upgrade must already have an iLO Advanced
or Select license on each managed server. Customer will receive a printed
license entitlement certificate via physical shipment. The license entitlement
certificate must be redeemed online or via fax in order to obtain the license
activation key(s). Includes one year of 24 x 7 HP Software Technical Support
and Update Service.
NOTE: For additional License Kits please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12623_div/12623_div.html
HP Insight Virtual Machine Manager software for ProLiant
HP Insight Virtual Machine Manager software, No Media, 1-Server License,
including 1 year of 24x7 Technical Support and Updates
NOTE: Customer will receive a printed license entitlement certificate via physical
shipment. The license entitlement certificate must be redeemed online or via fax
in order to obtain the license activation key(s). Includes one year of 24 x 7 HP
Software Technical Support and Update Service.
NOTE: For additional License Kits please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12328_div/12328_div.html
452677-B21
452153-B21
NOTE: Flexible and volume quantity license kits are available for Insight
Software products. Refer to: http://www.hp.com/servers/insightcontrol or the
various Insight Software product QuickSpecs for more information.
Security
HP Trusted Platform Module (TPM) Kit
NOTE: The TPM key is unique to every TPM deployed server and must be
retained. Misplacing or losing the key could result in data loss.
488069-B21
Storage Controller
HP Smart Array P700M/512 Controller
HP Smart Array P700M/256 Controller
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13175_div/13175_div.html
(Worldwide)
256 MB Cache Module
Battery Kit Upgrade (for BBWC)
NOTE: Requires 256 MB Cache Module.
512 MB BBWC Cache Module
HP Smart Array Advanced Pack (SAAP)
NOTE: A license key, a minimum of 256MB cache, and battery kit is required to
enable Smart Array Advanced Pack features. For more information go to:
http://www.hp.com/go/saap
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13203_div/13203_div.html
(Worldwide)
508226-B21
507925-B21
HP 4X QDR IB Dual Port Mezzanine HCA for HP BladeSystem c-Class
HP 4X DDR IB Dual Port Mezzanine HCA for HP BladeSystem c-Class
HP 4X DDR IB Mezzanine HCA for HP BladeSystem c-Class
492303-B21
448262-B21
410533-B21
HP InfiniBand
Mezzanine Options
DA - 13238 Worldwide QuickSpecs — Version 2 — 4.3.2009
462968-B21
462969-B21
462967-B21
516471-B21
Page 23
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Additional Options
HP c-Class Tape
Blades
HP StorageWorks SB1760c Tape Blade
NOTE: LTO-4 Ultrium tape technology.
HP StorageWorks SB920c Tape Blade
NOTE: LTO-3 Ultrium technology.
HP StorageWorks Ultrium 448c Tape Blade
NOTE: LTO-2 Ultrium technology.
NOTE: The HP PCI Express Mezzanine Pass-Thru Card for HP BladeSystem
(431643-B21) is required when installing a tape blade adjacent to a full-height
server blade.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12729_div/12729_div.html
AQ697A
AJ401A
440947-B21
HP StorageWorks
SB40c Storage Blade
HP StorageWorks SB40c Storage Blade
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12587_div/12587_div.html
(Worldwide)
411243-B21
HP PCI Expansion
Blade
HP PCI Expansion Blade
NOTE: Ships with one pre-installed PCI-X connect board. Also includes one
PCIe connect board which requires installation.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12753_div/12753_div.html
448018-B21
High Availability
Cluster Options
HP Serviceguard for Linux
HP Serviceguard Linux for HP ProLiant/x86 Servers
Licensed per physical server
Includes media and One Year 24x7 Software Support & Updates
HP Serviceguard Linux Oracle Database Toolkit for HP ProLiant/x86 Servers
Licensed per cluster
Includes media and One Year 24x7 Software Support & Updates
HP Serviceguard Extension for SAP on Linux for HP ProLiant/x86 Servers
Licensed per physical server
Includes media and One Year 24x7 Software Support & Updates
HP Serviceguard Linux Extended Distance Cluster (XDC) for HP ProLiant/x86
Servers
Licensed per physical server
Includes media and One Year 24x7 Software Support & Updates
NOTE: The above is not a complete list of all HP Serviceguard for Linux product
numbers. For a detailed list of supported configuration/certification options for
HP Serviceguard for Linux, please refer to the HP Serviceguard for Linux
Configuration & Ordering Guide available at: http://www.hp.com/go/sglx/info.
NOTE: HP Serviceguard for Linux products running on x86 platforms now
include one year of 24 x 7 Software Technical Support and Updates. Please see
the Support Information section of the HP Serviceguard for Linux QuickSpecs for
details.
NOTE: For additional information including a complete list of Product Numbers
for HP Serviceguard for Linux, please see the following QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11518_div/11518_div.html
(Worldwide)
DA - 13238 Worldwide QuickSpecs — Version 2 — 4.3.2009
463831-B21
463833-B21
463834-B21
463835-B21
Page 24
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Additional Options
USB Options
HP USB 2-Button Optical Scroll Mouse (Carbonite/Silver)
Service and Support NOTE: The HP Care Pack service part numbers below for ProLiant BL c-Class
Offerings
server blades, cover the server blade and all HP branded hardware options
(HP Care Pack Services) qualified for the server, purchased at the same time or afterwards, internal to the
server.
Hardware Services On-site Service
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Support Plus 24
Onsite HW support 24x7, 4hr response and Microsoft O/S SW Tech support
offsite, onsite at HP's discretion, 24x7 2hr response time incl. HP holidays,
Electronic
DA - 13238 Worldwide QuickSpecs — Version 2 — 4.3.2009
DC172B
UK065E
UK066E
UK067E
UE473E
Page 25
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Memory
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
Memory Population Guidelines
For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
www.hp.com/go/ddr3memory-configurator
Some DIMM installation guidelines are summarized below:
For the HP ProLiant BL460c G6 server with twelve (12) memory slots:
There are three (3) channels per processor; six (6) channels per server
There are two (2) DIMM slots for each memory channel; twelve (12) total slots.
Memory channel 1 consists of the two (2) DIMMs that are closest to the processor
Memory channel 3 consists of the two (2) DIMMs that are furthest from the processor
DIMM slots that are white should be populated first
Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs).
Do not install DIMMs if the corresponding processor is not installed
If only one processor is installed in a 2CPU system, only half of the DIMM slots are available
To maximize performance, balance the total memory capacity between all installed processors
It is not required, but it is recommended to load the channels similarly if possible
You can only have up to eight (8) ranks installed per channel
You can only install two quad-rank DIMMs per channel
You can only install two UDIMMs per channel; if available, the third slot in the channel must remain empty
Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel
Heaviest load (DIMM with most ranks) within a channel goes furthest from the chipset
For memory mirroring mode, channel 3 must be unpopulated. Channels 1 and 2 are populated identically
For lock-step mode, channel 3 must be unpopulated. DIMMs in channels 1 and 2 will be installed in pairs. The paired
slots will be 1,4; 2,5; 3;6 on a 3DPC system or 1,4; 2,5; on a 2DPC system
No mixing DIMM voltage; all DIMMs must be the same voltage
DIMM slot/capacity/populated speed table
DIMM Type
Registered DIMMS (RDIMMs)
DIMM Rank
Dual Rank (2R)
Quad Rank (4R)
DIMM Capacity
2GB
4GB
8GB
2GB
4GB
8GB
DIMM Native Speed
1333
1333
1066
*
1066
*
(MHz)
Unbuffered with ECC DIMMs (UDIMMs)
Single Rank (1R)
Dual Rank (2R)
1GB
2GB
1GB
2GB
1333
*
*
1333
SLOTS THAT CAN BE POPULATED
12 slot servers
12
12
12
*
12
*
12
*
*
12
MAXIMUM CAPACITY (GB)
24
96
*
48
*
12
*
*
24
1066
*
1066
*
1333
*
*
1333
1066
*
800
*
1066
*
*
1066
48
POPULATED DIMM SPEED (MHz)
1 DIMM Per
1333
1333
Channel
2 DIMM Per
1066
1066
Channel
* - not supported by HP at this time.
NOTES:
Mixing DIMM speeds is allowed, but the system processor speed rules always override the DIMM capabilities
If you do mix DIMM speeds, the memory bus will default to the minimum clock rate of all DIMMs in the system - even if
the slower DIMM is on the other processor
If you install 1x 1066MHz DIMM in channel 1 and 1x 1333MHz DIMM in channel 2, you still run at 1066MHz
If you install 1x 1066MHz DIMM in channel 1 and 5x 1333MHz DIMMs with 1 DIMM Per Channel (DPC) in each of the
other channels, you run at 1066MHz
DA - 13238 Worldwide QuickSpecs — Version 2 — 4.3.2009
Page 26
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Memory
If you install 3DPC in one channel (if applicable) and 1DPC in all other channels, you run at 800MHz
95 Watt CPU's are required for 1333MHz DIMM speeds
References to the above MHz speeds are for the various speeds of DDR3 DIMMs; 1333 refers to DDR3-1333, etc.
HP ProLiant BL460c G6 Server Blade DIMM slot and configuration diagrams
Basic memory slot and population diagram
Population order; start with "A" first, "B" second, "C" third, etc.
Chnl 1
slot #
1
2
12 DIMM SLOTS (6 per CPU node)
CPU1
CPU2
population order
slot #
population order
D
1
D
A
2
A
Chnl 1
Chnl 2
3
4
E
B
3
4
E
B
Chnl 2
Chnl 3
5
6
F
C
5
6
F
C
Chnl 3
HP ProLiant BL460c G6 Server Blade (1P Model)
Standard memory configuration (1 CPU model)
6GB (3 x 2GB) of PC3-10600 (DDR3-1333) RDIMMs
Chnl 1
slot #
1
2
CPU1
population order
D: empty
A: 2GB DIMM
slot #
1
2
CPU2
population order
D: empty
A: empty
Chnl 1
Chnl 2
3
4
E: empty
B: 2GB DIMM
3
4
E: empty
B: empty
Chnl 2
Chnl 3
5
6
F: empty
C: 2GB DIMM
5
6
F: empty
C: empty
Chnl 3
Standard Memory Plus Optional Memory (1 CPU model)
30 GB of PC3-10600 (DDR3-1333) RDIMMs (3 x 2GB plus 3 x 8GB)
Chnl 1
slot #
1
2
CPU1
population order
D: 2GB DIMM
A: 8GB DIMM
slot #
1
2
CPU2
population order
D: empty
A: empty
Chnl 1
Chnl 2
3
4
E: 2GB DIMM
B: 8GB DIMM
3
4
E: empty
B: empty
Chnl 2
Chnl 3
5
6
F: 2GB DIMM
C: 8GB DIMM
5
6
F: empty
C: empty
Chnl 3
DA - 13238 Worldwide QuickSpecs — Version 2 — 4.3.2009
Page 27
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Memory
Standard Memory Replaced with Optional Memory (1 CPU model)
48GB of PC3-8500 Dual-Rank RDIMMs (6 x 8GB)
Chnl 1
slot #
1
2
CPU1
population order
D: 8GB DIMM
A: 8GB DIMM
slot #
1
2
CPU2
population order
D: empty
A: empty
Chnl 1
Chnl 2
3
4
E: 8GB DIMM
B: 8GB DIMM
3
4
E: empty
B: empty
Chnl 2
Chnl 3
5
6
F: 8GB DIMM
C: 8GB DIMM
5
6
F: empty
C: empty
Chnl 3
UDIMM maximum configuration (1 CPU model)
12GB, consisting of six (6) 2GB dual-rank PC3-10600 UDIMMs
Chnl 1
slot #
1
2
CPU1
population order
D: 2GB DIMM
A: 2GB DIMM
slot #
1
2
CPU2
population order
D: empty
A: empty
Chnl 1
Chnl 2
3
4
E: 2GB DIMM
B: 2GB DIMM
3
4
E: empty
B: empty
Chnl 2
Chnl 3
5
6
F: 2GB DIMM
C: 2GB DIMM
5
6
F: empty
C: empty
Chnl 3
Standard Memory Replaced with Optional Memory (2 CPU Model)
RDIMM maximum configuration
96GB, consisting of twelve (12) 8GB dual-rank PC3-8500 RDIMMs
Chnl 1
slot #
1
2
CPU1
population order
D: 8GB DIMM
A: 8GB DIMM
slot #
1
2
CPU2
population order
D: 8GB DIMM
A: 8GB DIMM
Chnl 1
Chnl 2
3
4
E: 8GB DIMM
B: 8GB DIMM
3
4
E: 8GB DIMM
B: 8GB DIMM
Chnl 2
Chnl 3
5
6
F: 8GB DIMM
C: 8GB DIMM
5
6
F: 8GB DIMM
C: 8GB DIMM
Chnl 3
UDIMM maximum configuration (2 CPU model)
24GB, consisting of twelve (12) 2GB dual-rank PC3-10600 UDIMMs
DA - 13238 Worldwide QuickSpecs — Version 2 — 4.3.2009
Page 28
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Memory
Chnl 1
slot #
1
2
CPU1
population order
D: 2GB DIMM
A: 2GB DIMM
slot #
1
2
CPU2
population order
D: 2GB DIMM
A: 2GB DIMM
Chnl 1
Chnl 2
3
4
E: 2GB DIMM
B: 2GB DIMM
3
4
E: 2GB DIMM
B: 2GB DIMM
Chnl 2
Chnl 3
5
6
F: 2GB DIMM
C: 2GB DIMM
5
6
F: 2GB DIMM
C: 2GB DIMM
Chnl 3
NOTE: Capacity references are rounded to the common Gigabyte values.
1GB = 1024MB
2GB = 2048MB
4GB = 4096MB
8GB = 8192MB
Following are memory options available from HP:
Registered DIMMs (RDIMMs)
HP 2GB 2Rx8 PC3-10600R-9 Kit
HP 4GB 2Rx4 PC3-10600R-9 Kit
HP 4GB 4Rx8 PC3-8500R-7 LP Kit
HP 8GB 2Rx4 PC3-8500R-7 Kit
Unbuffered with ECC DIMMs (UDIMMs)
HP 1GB 1Rx8 PC3-10600E-9 Kit
HP 2GB 2Rx8 PC3-10600E-9 Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules
and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.com/go/ddr3memoryconfigurator.
DA - 13238 Worldwide QuickSpecs — Version 2 — 4.3.2009
500656-B21
500658-B21
500660-B21
516423-B21
500668-B21
500670-B21
Page 29
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Storage
1-2
Hard Drives
SAS Hot Plug SFF Enterprise (ENT) Drives
Quantity
Position
Supported
Supported
300GB 6G SAS 10K
2
1-2
300GB 3G SAS 10K
146GB 6G SAS 10K
146GB 3G SAS 10K
146GB 3G SAS 15K
72GB 3G SAS 15K
72GB 3G SAS 10K
36GB 3G 15K SAS
SATA SFF Hot Plug Entry (ETY) Drives
Quantity
Supported
250GB 3G SATA 5.4K
2
120GB 1.5 G SATA 5.4K
Position
Supported
1-2
2 x SFF SAS or SATA Hot Plug Hard Drives
Controller
HP Smart Array P410i Controller
Controller
HP Smart Array P410i Controller
External Storage
Quantity
Position
Supported
Supported Host Controller or Adapter
XP Disk Array Systems Please see the
External
Please see the XP Disk Array Systems Quick Specs for the
XP Disk Array
latest list of supported HBAs
Systems
QuickSpecs
below to
determine
configuration
requirements
HP StorageWorks XP10000 Disk Array:
http://h18006.www1.hp.com/products/storageworks/xp10000/index.html (Worldwide)
Enterprise Virtual Array Please see the
External
Please see the XP Disk Array Systems Quick Specs for the
Systems
XP Disk Array
latest list of supported HBAs
Systems
QuickSpecs
below to
determine
configuration
requirements
HP StorageWorks Enterprise Virtual Array Family:
http://h18006.www1.hp.com/products/quickspecs/12408_div/12408_div.html (Worldwide)
DA - 13238 Worldwide QuickSpecs — Version 2 — 4.3.2009
Page 30
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Storage
System Unit
Dimensions (H x W x D) 7.154 x 2.19 x 20.058 in (18.17 x 5.56 x 50.95 cm)
(with bezel)
Weight
Maximum
14.20 lb (6.44 kg)
(approximate)
(all hard drives and
processors installed)
Minimum
10.75 lb (4.87 kg)
(one hard drive and
processor installed)
Power Specifications For power specifications including Input Requirements, BTU Rating, and
Power Supply Output, please see the HP BladeSystem c-Class
Enclosures QuickSpecs located at URL:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/
12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/
12810_div.html
System Inlet
Temperature
Relative Humidity
(non-condensing)
Altitude
Acoustic Noise
To review typical system power ratings use the HP BladeSystem Power
Sizer which is available via the online tool located at URL:
http://www.hp.com/go/bladesystem/powercalculator
Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change
is 10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed.
System performance may be reduced if
operating with a fan fault or above 30°C
(86°F).
Non-operating
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
Operating
10 to 90% relative humidity (Rh), 28°C
(82.4°F) maximum wet bulb temperature, noncondensing.
Non-operating
5 to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature,
non-condensing.
Operating
3050 m (10,000 ft). This value may be limited
by the type and number of options installed.
Maximum allowable altitude change rate is
457 m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500
ft/min).
For acoustic noise specifications, please see the HP BladeSystem cClass Enclosures QuickSpecs located at URL:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/
12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
DA - 13238 Worldwide QuickSpecs — Version 2 — 4.3.2009
Page 31
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Technical Specifications
http://h18000.www1.hp.com/products/quickspecs/12810_div/
12810_div.html
HP Smart Array P410i Disk Drive Interface
Controller
Server Interface
Cache Memory
3Gb (6Gb Capable) SAS (Serial Attached SCSI)
1.5Gb (3Gb Capable) SATA (Serial Advanced Technology Attachment)
x4 PCI Express host interface
0 MB (none) standard
Optional 256MB or 512MB Cache Memory
2 (with standard 0MB cache)
Logical Drives
Supported
Maximum Logical Drive32 (with optional 256MB cache)
Capacity
64 (with optional 512MB cache)
Host Memory
64-bit, supporting servers memory space greater than 4 GB
Addressing
RAID Support
RAID 1( Mirroring)
RAID 0 (Striping)
Upgradeable Firmware Controller: Upgradeable Firmware with Recovery ROM feature
Online Drive Flash (with SAS drives) requires 256MB or 512MB module
Embedded NC532i Dual Type
Port Flex-10 10GbE
Network Processor
Multifunction Server
Data Transfer Method
Adapter
Network Transfer Rate
IEEE Compliance
Environment-friendly
Products and
Approach
End-of-life
Management and
Recycling
Integrated dual-port KR 10GbE
Broadcom 57711
x4 PCI Express Generation 2
Two ports, each at 20 Gbps full duplex; 40 Gbps aggregate full duplex
theoretical bandwidth
NOTE: Each port is autosensing 1 Gb / 10 Gb, and can interoperate
with 1 Gb HP BladeSystem c-Class interconnect components.
NOTE: Each port on the NC532i adapter transmits from the server at
only 20 Gbps (theoretical) full duplex.
802.1p, 802.1q, 802.3u, 802.3ad, 802.3ae, 802.3ap (10GBase-KX4),
802.3x and 802.3z
Hewlett-Packard offers end-of-life HP product return, trade-in, and
recycling programs in many geographic areas. For trade-in information,
please go to: http://www.hp.com/go/green. To recycle your product,
please go to: http://www.hp.com/go/green or contact your nearest HP
sales office. Products returned to HP will be recycled, recovered or
disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to
provide treatment information for each product type for use by treatment
facilities. This information (product disassembly instructions) is posted
on the Hewlett Packard web site at: http://www.hp.com/go/green. These
instructions may be used by recyclers and other WEEE treatment
facilities as well as HP OEM customers who integrate and re-sell HP
equipment.
DA - 13238 Worldwide QuickSpecs — Version 2 — 4.3.2009
Page 32
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Technical Specifications
© Copyright 2009 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon
Inside are trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
DA - 13238 Worldwide QuickSpecs — Version 2 — 4.3.2009
Page 33
Download PDF
Similar pages