4.05.2017
1
4250140353702
NC-01
Technical Data
Logistical Data
Case Type
Mid-Tower
Form Factor
ATX, Micro-ATX, Mini-ITX
5,25" inch drive bay external
1x
3,5" inch drive bay internal
2x
2,5" inch drive bay internal
3x
Case fan (front)
opt. 2 x 120/140 mm
Case fan (rear)
1 x 120 mm
Case fan (top)
opt. 2 x 120 mm
High
ca. 458 mm
Width
ca. 205 mm
Depth
ca. 453 mm
Weight
ca. 5,9 kg
Material
Steel, aluminum, plastics
Maximum VGA Card Length
415 mm
Maximum height of CPU coolers 163 mm
Maximum height of radiators
240 mm (front), 120 mm (rear)
Maximum thickness of radiators
35 mm with fans (front)
Code
4250140353702
Manufacturer Number
CT NC-01
4.05.2017
2
4250140353702
Cooltek NC-01, ATX Midi Tower, 1 x 120 mm (hinten), MESH-Front mit Aluminium-Elementen, 2 x USB 3,0, 2 x USB 2.0, Fan Controller, schwarz
With the NC-01, we add a solid and versatile mid-tower to our product range. It is perfect for both high-quality office computers and high-performance
gaming systems.
Both sides of the subtle MESH front are decorated with brushed aluminum elements and one 5.25 inch drive bay is available for external use. On the
upper part of the front, you can find the I/O-Panel with 2 x USB 2.0, 1 x USB 3.0 and a fan control with two channels, as well as the obligatory audio
connections. In addition, you will find the Power and HDD LEDs, as well as the power and reset buttons here.
The case is characterized by a stable and high quality steel frame - folded and deburred edges prevent the danger of cuts during the installation of
the hardware. The interior is completely black and offers a generous cable management. The cover for the power supply offers several openings for
cable routing as well.
The open interior design allows the easy installation of powerful hardware. A PSU cover separates the power supply and the HDD cage from the
motherboard area. The guarantees the case an outstanding stability and offers a thermal separation of the power supply area and the motherboard
zone with the CPU and VGA card. Finally, it offers a very tidy interior design.
A hard disk cage for two 2.5 inch or 3.5 inch HDD / SSD is hidden under the power supply cover. 3.5 inch drives can be attached tool less, smaller
drives are screwed. Three additional mounting points are available for installing SSDs. Two mounting points are attached to the mainboard tray
below the optical drive and one on the back of the tray.
A 120 mm fan is preinstalled at the rear of the NC-01. The ventilation system offers a lot of expansion possibilities, to provide sufficient cooling for a
particularly powerful system. Behind the inner front two 120 or 140 mm fans can be installed. Two additional mounting slots for 120 mm fans are
located under the top cover. A magnetic filter on the outside ensures that no dust will enter the interior. Further dust filters can be found behind the
front and on the bottom.
We also considered the needs of fans of water cooling systems. The NC-01 allow the easy installation of 240 mm or 280 mm radiators. In addition,
there are mounting points at the rear of the case for a compact water cooling system with a 120 mm radiator.
For the installation of the graphics cards, up to 415 mm are available in the NC-01. The maximum height for CPU coolers is 163 mm. Thus,
high-performance gaming systems can be installed easily.
The NC-01 is designed for all conventional ATX power supplies. Both ATX, Micro-ATX and Mini-ITX motherboards can be installed. Seven PCI slots
for expansion cards are available at the back.
Depicted hardware and LED fans are not included.
Download PDF
Similar pages