QuickSpecs
HP 1950 Switch Series
Overview
Models
HP 1950-24G-2SFP+-2XGT Switch
JG960A
HP 1950-48G-2SFP+-2XGT Switch
JG961A
HP 1950-24G-2SFP+-2XGT-PoE+(370W) Switch
JG962A
HP 1950-48G-2SFP+-2XGT-PoE+(370W) Switch
JG963A
Key features
Four 10G uplinks for fast connection to servers and storage
Two SFP+ and two 10GBASE-T ports -- supports fiber and cost-effective copper connectivity
Four-high stacking allows for redundancy while simplifying administration
Customized operation using intuitive Web interface
Limited Lifetime warranty
Product overview
The HP 1950 Switch Series consists of smart web-managed Gigabit Ethernet switches with 10-Gigabit uplinks, for
advanced small business customers needing high-performance connections to servers and network storage.
The 1950 Switch Series includes four switches: two standard models and two PoE+ models in 24- and 48-port
configurations. The switches each have two 10GBASE-T ports supporting copper-based Category 5e-based cabling,
and two 10G SFP+ ports for fiber connectivity. The PoE+ models both have a PoE power budget of 370W to power up
PoE/PoE+ compliant client devices.
The 1950 Switch Series has an intuitive Web-based interface for simple customization of network operation. It supports
true-stacking, allowing up to four devices to be logically administered as a single entity, simplifying administration while
supporting greater network redundancy. Models support both rack mounting and desktop operation. They have IPv4
and IPv6 operation, with Layer 2 switching as well as Layer 3 static routing. Other features include: link aggregation to
boost link performance; VLANs, Access Control Lists, and 802.1X network login for enhanced security; and three
versions of Spanning Tree Protocol for added network resiliency. The switches come with a limited lifetime warranty
covering the unit, fans, and power supplies, as well as 24X7 phone support for the first three years of ownership.
DA - 15191
Worldwide QuickSpecs — Version 1 — 5.5.2015
Page 1
QuickSpecs
HP 1950 Switch Series
Overview
Features and benefits
Management
•
Four-high true stacking
simplifies administration of multiple devices. Create a single logical managed unit with up to four 1950
switches. Balance connections across multiple units with standard Link Aggregation (LACP) for enhanced
network resiliency. Stack using affordable Cat 5e, or long distance fiber, or localized DAC cables. Stacked
units can co-located or separated physically.
•
Intuitive Web browser-based management
allows for easy customization of the switch -- even by non-technical users.
•
Secure Web-management sessions with HTTPS / SSL
encrypts and otherwise protects management sessions through HTTP Secure (HTTPS). Prevents snooping of
sensitive management information such as passwords.
•
SNMPv1, v2c, and v3
facilitates remote management of the switch, as the device can be discovered and monitored from an SNMP
management station
•
Complete session logging
provides detailed information for problem identification and resolution
•
Dual flash images
provides independent primary and secondary operating system files for backup while upgrading
•
Port mirroring
enables traffic on a port to be simultaneously sent to a network analyzer for monitoring
•
Network Time Protocol (NTP)
synchronizes timekeeping among distributed time servers and clients; keeps timekeeping consistent among all
clock-dependent devices within the network so that the devices can provide diverse applications based on the
consistent time
•
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
advertises and receives management information from adjacent devices on a network, facilitating easy
mapping by network management applications
•
Limited Command Line Interface (CLI)
facilitates in the deployment and initial configuration of the unit. Supports troubleshooting actions as well.
•
RMON
provides advanced monitoring and reporting capabilities for statistics, history, alarms, and events
•
Default DHCP client modes
simplifies device deployment. Connect a new out-of-the box switch to a network with a DHCP server and the
device will obtain its IP address automatically with plug-and-play operation. In the absence of a DHCP server,
the switch will fall-back to a unique static address determined by the switch's MAC address.
•
Cable diagnostic tool
use to remotely detect cable issues with cables attached to the switch.
Quality of Service (QoS)
Broadcast control
allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
Rate limiting
sets per-port ingress enforced maximums and per-port, per-queue minimums
Traffic prioritization
makes it possible to prioritize important and/or time-sensitive traffic ahead of less important traffic. Use with VoIP
or video to optimize its performance on the network. Recognizes both IEEE 802.1p and DSCP prioritization
DA - 15191
Worldwide QuickSpecs — Version 1 — 5.5.2015
Page 2
QuickSpecs
HP 1950 Switch Series
Overview
tagging. Packets are mapped to four hardware queues for more effective throughput.
Connectivity
Auto-MDI/MDIX
adjusts automatically to straight-through or crossover cables on all 10/100/1000 and 10GBASE-T ports.
IEEE 802.3X flow control
provides a configurable flow throttling mechanism propagated through the network to prevent packet loss at a
congested node.
Packet storm protection
protects against broadcast, multicast, or unicast storms with user-defined thresholds
Jumbo frame support up to 10-kilobyte frames
improves efficiency of data transfers by allowing more data into a given packet. This especially useful for transfers
of large amounts of data. HP 1950 Switches support up to 10 kilobyte frame sizes.
IEEE 802.3at Power over Ethernet (PoE+)
delivers power to compliant devices over Ethernet cabling, greatly simplifying installation of those devices. The
1950 Series has two PoE+ enabled models. The PoE+ 802.3at standard supports delivery of up to 30 Watts of
power to the attached devices, enough to support the latest models of IP phones, Wireless Access Points, video
surveillance cameras, or other PoE/PoE+ enabled devices. HP 1950 PoE+ models support 370W of total PoE
power.
IEEE 802.3af Power over Ethernet (PoE) ready
delivers power to compliant devices over Ethernet cabling, greatly simplifying installation of those devices. HP
1950 PoE+ models are fully backward compliant with the older PoE standard which provides up to 15.4 Watts of
PoE power per port to attached devices.
Available redundant power for PoE+ models
optional Redundant Power System is available to add power redundancy and to supplement the PoE power of the
PoE+ switches. With the optional RPS, the PoE+ power budget can be increased to 740 Watts; additionally, the
switch will continue operating and powering downstream PoE devices even if the unit internal power supply should
fail. Order the HP RPS1600 Redundant Power System (JG136A).
Fully IPv6 capable
IPv6 host
enables switches to be managed and deployed at the IPv6 network's edge
IPv6 routing
supports IPv6 static routes
MLD snooping
forwards IPv6 multicast traffic to the appropriate interface, preventing traffic flooding
IPv6 ACL/QoS
supports ACL and QoS for IPv6 network traffic
Security
Access Control Lists (ACLs)
gives granular control over what traffic goes where in the network. Allows for traffic filtering. ACLs rules can be
based on MAC-address or IP-address. ACL rules can be time-based to implement access control during certain
hours or days.
IEEE 802.1X and RADIUS network logins
controls port-based access for authentication and accountability
Automatic VLAN assignment
assigns users automatically to the appropriate VLAN based on their identity, location and time of day
STP BPDU port protection
blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
STP root guard
protects the root bridge from malicious attacks or configuration mistakes
Automatic denial-of-service protection
protects the network by blocking malicious DoS attacks aimed at the switch itself.
Management password
provides security so that only authorized access to the Web browser interface is allowed
Performance
Half-/full-duplex auto-negotiating capability on every port
doubles the throughput of every port
DA - 15191
Worldwide QuickSpecs — Version 1 — 5.5.2015
Page 3
QuickSpecs
HP 1950 Switch Series
Overview
Selectable queue configurations
allows for increased performance by selecting the number of queues and associated memory buffering that best
meet the requirements of the network applications
IGMP / MLD Snooping
improves network performance by filtering multicast traffic when there is no multicast receiver on a connection.
Without this, multicast traffic is flooded to all ports. IGMP snooping is used in IPv4 networks. The IPv6 equivalent - MLD Snooping -- is also supported.
10-Gigabit SFP+ based Fiber Uplinks
supports high-bandwidth connections over fiber. HP 1950 Switches each have two SFP+ transceiver slots
supporting 10-Gigabit fiber-based connections using optional 10G transceivers. Fiber is particularly suited for
connecting at distances beyond the 100 Meter limitation of copper-based Cat 5e cabling. Alternatively use the
SFP+ ports for redundant stacking of up to four units using Direct Attached Cables (DAC).
10-Gigabit 10GBASE-T RJ45 Uplinks
supports high-bandwidth connections over Cat 5e cabling. HP 1950 Switches each have two 10GBASE-t RJ45
ports supporting 10-Gigabit copper-based connections. Cat 5e is economical and practical for distances up to 100
Meters. Alternatively use the 10GBASE-T ports for redundant stacking of up to four units.
Layer 2 switching
VLAN support and tagging
supports IEEE 802.1Q (4,094 VLAN IDs) and 256 VLANs simultaneously
Spanning Tree Protocol (STP)
supports standard IEEE 802.1D STP, IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) for faster convergence,
and IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
BPDU filtering
improves network efficiency by filtering unnecessary BPDU packets on a port. When Spanning Tree Protocol
(STP) is enabled globally but disabled on specific ports, BPDU packets are not sent out the ports where STP is
disabled.
Layer 3 services
Address Resolution Protocol (ARP)
determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows
detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets
are separated by a Layer 2 network
DHCP relay
simplifies management of DHCP addresses in networks with multiple subnets
Layer 3 routing
Static IPv4/IPv6 routing
provides basic routing (supporting up to 32 static routes and 8 virtual VLAN interfaces); allows manual routing
configuration
Resiliency and high availability
Link aggregation
groups together multiple ports (up to a maximum of two ports) automatically using Link Aggregation Control
Protocol (LACP), or manually, to form an ultra-high-bandwidth connection to the network backbone; helps prevent
traffic bottlenecks
Convergence
LLDP-MED (Media Endpoint Discovery)
defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically
configure network devices such as IP phones
Auto voice VLAN
recognizes IP phones and automatically assigns voice traffic to dedicated VLAN for IP phones
PoE Models For Converged Voice / Data Networks
simplifies and lowers the cost of installing a converged infrastructure. Power IP phones, Access Points, Video
Surveillance cameras, or other PoE-enabled devices. HP 1950 Switches support multiple methods of allocating
PoE power -- IEEE 802.3af class, LLDP-MED, or user-specified -- for more efficient energy useage.
Additional information
Green initiative support
DA - 15191
Worldwide QuickSpecs — Version 1 — 5.5.2015
Page 4
QuickSpecs
HP 1950 Switch Series
Overview
provides support for RoHS and WEEE regulations
Green IT and power
improves energy efficiency through the use of the latest advances in silicon development; shuts off unused ports
and utilizes variable-speed fans, reducing energy costs
Warranty and support
Limited Lifetime Warranty 2.0
advance hardware replacement with next-business-day delivery (available in most countries). See
www.hp.com/networking/warrantysummary for duration details.
Electronic and telephone support (for Limited Lifetime Warranty 2.0)
limited 24x7 telephone support is available from HP for the first 3 years; limited electronic and business hours
telephone support is available from HP for the entire warranty period; to reach our support centers, refer to
www.hp.com/networking/contact-support; for details on the duration of support provided with your product
purchase, refer to www.hp.com/networking/warrantysummary
DA - 15191
Worldwide QuickSpecs — Version 1 — 5.5.2015
Page 5
QuickSpecs
HP 1950 Switch Series
Configuration
Build To Order: BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO
or Rack-Shippable solution.
HP 1950-24G-2SFP+-2XGT Switch
JG960A
24 RJ-45 auto-negotiating 10/100/1000 ports
2 SFP+ fixed 1000/10000 SFP+ ports
min=0 \ max=2 SFP+ Transceivers
2 RJ-45 1/10GBASE-T port
1U - Height
See
Configuration
Note:1, 2
JG960A
#B2B
PDU Cable NA/MX/TW/JP
C15 PDU Jumper Cord (NA/MX/TW/JP)
JG960A
#B2C
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
HP 1950-48G-2SFP+-2XGT Switch
JG961A
48 RJ-45 auto-negotiating 10/100/1000 ports
2 SFP+ fixed 1000/10000 SFP+ ports
min=0 \ max=2 SFP+ Transceivers
2 RJ-45 1/10GBASE-T ports
1U - Height
See
Configuration
Note:1, 2
JG961A
#B2B
PDU Cable NA/MX/TW/JP
C15 PDU Jumper Cord (NA/MX/TW/JP)
JG961A
#B2C
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
HP 1950-24G-2SFP+-2XGT-PoE+ Switch
JG962A
24 RJ-45 auto-negotiating 10/100/1000 PoE+ ports
2 SFP+ fixed 1000/10000 SFP+ ports
min=0 \ max=2 SFP+ Transceivers
2 RJ-45 1/10GBASE-T ports
1U - Height
PDU Cable NA/MX/TW/JP
See
Configuration
Note:1, 2
JG962A#B2B
C15 PDU Jumper Cord (NA/MX/TW/JP)
PDU Cable ROW
JG962A#B2C
C15 PDU Jumper Cord (ROW)
HP 1950-48G-2SFP+-2XGT-PoE+ Switch
JG963A
48 RJ-45 auto-negotiating 10/100/1000 PoE+ ports
2 SFP+ fixed 1000/10000 SFP+ ports
min=0 \ max=2 SFP+ Transceivers
2 RJ-45 1/10GBASE-T ports
1U - Height
DA - 15191
Worldwide QuickSpecs — Version 1 — 5.5.2015
See
Configuration
Note:1, 2
Page 6
QuickSpecs
HP 1950 Switch Series
Configuration
PDU Cable NA/MX/TW/JP
JG963A#B2B
C15 PDU Jumper Cord (NA/MX/TW/JP)
PDU Cable ROW
JG963A#B2C
C15 PDU Jumper Cord (ROW)
Configuration Rules:
Note 1
The following Transceivers install into this switch:
J4858C - HP X121 1G SFP LC SX Transceiver
J4859C - HP X121 1G SFP LC LX Transceiver
J8177C - HP X121 1G SFP RJ45 T Transceiver
JD118B - HP X120 1G SFP LC SX Transceiver
JD119B - HP X120 1G SFP LC LX Transceiver
JD089B - HP X120 1G SFP RJ45 T Transceiver
JD092B - HP X130 10G SFP+ LC SR Transceiver
JD094B - HP X130 10G SFP+ LC LR Transceiver
J9150A - HP X132 10G SFP+ LC SR Transceiver
J9151A - HP X132 10G SFP+ LC LR Transceiver
JD095C - HP X240 10G SFP+ SFP+ 0.65m DAC Cable
JD096C - HP X240 10G SFP+ SFP+ 1.2m DAC Cable
JD097C - HP X240 10G SFP+ SFP+ 3m DAC Cable
JG081C - HP X240 10G SFP+ SFP+ 5m DAC Cable
Note 2
Localization (Wall Power Cord) required on orders without #B2B or #B2C (PDU Power
Cord). (See Localization Menu)
Remarks:
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico,
Taiwan, and Japan or #B2C ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for
BTO and Box Level CTO)
Transceivers
SFP Transceivers
HP X121 1G SFP LC SX Transceiver
J4858C
HP X121 1G SFP LC LX Transceiver
J4859C
HP X121 1G SFP RJ45 T Transceiver
J8177C
HP X120 1G SFP LC SX Transceiver
JD118B
HP X120 1G SFP LC LX Transceiver
JD119B
HP X120 1G SFP RJ45 T Transceiver
JD089B
SFP+ Transceivers
HP X130 10G SFP+ LC SR Transceiver
JD092B
HP X130 10G SFP+ LC LR Transceiver
JD094B
HP X132 10G SFP+ LC SR Transceiver
J9150A
HP X132 10G SFP+ LC LR Transceiver
J9151A
HP X240 10G SFP+ SFP+ 0.65m DAC Cable
JD095C
HP X240 10G SFP+ SFP+ 1.2m DAC Cable
JD096C
HP X240 10G SFP+ SFP+ 3m DAC Cable
JD097C
HP X240 10G SFP+ SFP+ 5m DAC Cable
JG081C
DA - 15191
Worldwide QuickSpecs — Version 1 — 5.5.2015
Page 7
QuickSpecs
HP 1950 Switch Series
Configuration
Cables
Multi-Mode Cables
HP .5m Multi-mode OM3 LC/LC FC Cable
AJ833A
HP 1m Multi-mode OM3 LC/LC FC Cable
AJ834A
HP 2 m Multimode OM3 LC/LC FC Cable
AJ835A
HP 5 m Multimode OM3 LC/LC FC Cable
AJ836A
HP 15 m Multimode OM3 LC/LC FC Cable
AJ837A
HP 30 m Multimode OM3 LC/LC FC Cable
AJ838A
HP 50 m Multimode OM3 LC/LC FC Cable
AJ839A
HP Premier Flex LC/LC OM4 2f 1m Cbl
QK732A
HP Premier Flex LC/LC OM4 2f 2m Cbl
QK733A
HP Premier Flex LC/LC OM4 2f 5m Cbl
QK734A
HP Premier Flex LC/LC OM4 2f 15m Cbl
QK735A
HP Premier Flex LC/LC OM4 2f 30m Cbl
QK736A
HP Premier Flex LC/LC OM4 2f 50m Cbl
QK737A
Switch Enclosure Options
External/Redundant Power Supplies
HP RPS1600 Redundant Power System
JG136A
Height = 1U
includes 1 x c13, 1600w and Power Supply port
See
Configuration
Note:2, 3, 4
HP RPS1600 1600W AC Power Supply
JG137A
Installs into JG136A only
See
Configuration
Note:1, 3
Configuration Rules:
Note 1
If this power supply is selected, The JG136A - HP A-RPS1600 Redundant Power System
must be on order or onsite.
Note 2
Localization required.
Note 3
Each switch will only support 1 JG136A and 1 JG137A Power supply systems.
Note 4
This power supply only supported on switches JG962A and JG963A.
External/Redundant Power Cables
HP X290 1000 A JD5 2m RPS Cable
JD187A
See
Configuration
Note:1
Remarks:
These cables are used to connect the External Power System to Switch.
DA - 15191
Worldwide QuickSpecs — Version 1 — 5.5.2015
Page 8
QuickSpecs
HP 1950 Switch Series
Configuration
Configuration Rules:
Note 1
This Cable is only supported on switches JG962A and JG963A when used with the RPS
1600 (JG136A)
DA - 15191
Worldwide QuickSpecs — Version 1 — 5.5.2015
Page 9
QuickSpecs
HP 1950 Switch Series
Technical Specifications
HP 1950-24G-2SFP+-2XGT Switch (JG960A)
I/O ports and slots
24 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
2 SFP+ fixed 1000/10000 SFP+ ports
2 RJ-45 1/10GBASE-T ports
Additional ports and
slots
1 RJ-45 console port to access limited CLI port
Physical
characteristics
Dimensions
17.17(w) x 6.3(d) x 1.73(h) in (43.6 x 16 x 4.4 cm) (1U height)
Weight
6.61 lb (3 kg)
Memory and
processor
128 MB flash; Packet buffer size: 1.5 MB, 1 GB SDRAM
Mounting and
enclosure
Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
10 Gbps Latency
< 1.5 µs
Throughput
up to 95.2 Mpps (64-byte packets)
Routing/Switching
capacity
128 Gbps
Routing table size
32 entries (IPv4), 32 entries (IPv6)
MAC address table
size
16384 entries
Reliability
MTBF (years)
87.2
Environment
Operating temperature 32°F to 113°F (0°C to 45°C)
Electrical
characteristics
Operating relative
humidity
10% to 90%, noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%, noncondensing
Altitude
up to 16,404 ft (5 km)
Acoustic
Low-speed fan: 19.0 dB, High-speed fan: 44.5 dB; ISO 7779 Dual
speed fan
Frequency
50/60 Hz
Voltage
100 - 240 VAC, rated
(depending on power supply chosen)
Maximum power rating 34 W
Notes
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all
ports plugged in, and all modules populated.
Safety
UL 60950; IEC 60950-1; EN 60950-1; GB 4943.1
Emissions
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN
61000-3-2 2000, 61000-3-3; ICES-003 Class A
Management
IMC - Intelligent Management Center; Limited command-line interface; Web browser; SNMP
Manager; HTTPS; RMON1; FTP; Supported by HP IMC and generic SNMP management
platforms. Refer to documentation for MIB support details.
Notes
Transceivers under accessories are recommended versions. Here is the list of fully supported
transceivers. 10G SFP+: JD092B, JD093B, JD094B, JG234A, J9150A, J9151A, J9152A,
J9153A. GE SFP: JD118B, JD119B, JD089B, J4858C, J4859C, J8177C.
DA - 15191
Worldwide QuickSpecs — Version 1 — 5.5.2015
Page 10
QuickSpecs
HP 1950 Switch Series
Technical Specifications
Services
Refer to the HP website at www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your
area, please contact your local HP sales office.
HP 1950-48G-2SFP+-2XGT Switch (JG961A)
I/O ports and slots
48 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
2 SFP+ fixed 1000/10000 SFP+ ports
2 RJ-45 1/10GBASE-T ports
Additional ports and
slots
1 RJ-45 console port to access limited CLI port
Physical
characteristics
Dimensions
17.32(w) x 10.63(d) x 1.73(h) in (44 x 27 x 4.4 cm) (1U height)
Weight
11.02 lb (5 kg)
Memory and
processor
128 MB flash; Packet buffer size: 3 MB, 1 GB SDRAM
Mounting and
enclosure
Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
10 Gbps Latency
< 1.5 µs
Throughput
up to 130.9 Mpps (64-byte packets)
Routing/Switching
capacity
176 Gbps
Routing table size
32 entries (IPv4), 32 entries (IPv6)
MAC address table
size
16384 entries
Reliability
MTBF (years)
51
Environment
Operating temperature 32°F to 113°F (0°C to 45°C)
Electrical
characteristics
Operating relative
humidity
10% to 90%, noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%, noncondensing
Altitude
up to 16,404 ft (5 km)
Acoustic
Low-speed fan: 38.4 dB, High-speed fan: 47.0 dB; ISO 7779 Dual
speed fan
Frequency
50/60 Hz
Voltage
100 - 240 VAC, rated
(depending on power supply chosen)
Maximum power rating 54 W
Notes
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all
ports plugged in, and all modules populated.
Safety
UL 60950; IEC 60950-1; EN 60950-1; GB 4943.1
Emissions
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN
61000-3-2 2000, 61000-3-3; ICES-003 Class A
Management
IMC - Intelligent Management Center; Limited command-line interface; Web browser; SNMP
Manager; HTTPS; RMON1; FTP; Supported by HP IMC and generic SNMP management
platforms. Refer to documentation for MIB support details.
DA - 15191
Worldwide QuickSpecs — Version 1 — 5.5.2015
Page 11
QuickSpecs
HP 1950 Switch Series
Technical Specifications
Notes
Transceivers under accessories are recommended versions. Here is the list of fully supported
transceivers. 10G SFP+: JD092B, JD093B, JD094B, JG234A, J9150A, J9151A, J9152A,
J9153A. GE SFP: JD118B, JD119B, JD089B, J4858C, J4859C, J8177C.
Services
Refer to the HP website at www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your
area, please contact your local HP sales office.
HP 1950-24G-2SFP+-2XGT-PoE+(370W) Switch (JG962A)
I/O ports and slots
24 RJ-45 auto-negotiating 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE, IEEE
802.3at)
2 SFP+ fixed 1000/10000 SFP+ ports
2 RJ-45 1/10GBASE-T ports
Additional ports and
slots
1 RJ-45 console port to access limited CLI port
Physical
characteristics
Dimensions
17.32(w) x 14.17(d) x 1.73(h) in (44 x 36 x 4.4 cm) (1U height)
Weight
13.23 lb (6 kg)
Memory and
processor
128 MB flash; Packet buffer size: 1.5 MB, 1 GB SDRAM
Mounting and
enclosure
Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
10 Gbps Latency
< 1.5 µs
Throughput
up to 95.2 Mpps (64-byte packets)
Routing/Switching
capacity
128 Gbps
Routing table size
32 entries (IPv4), 32 entries (IPv6)
MAC address table
size
16384 entries
Reliability
MTBF (years)
44.4
Environment
Operating temperature 32°F to 113°F (0°C to 45°C)
Electrical
characteristics
Operating relative
humidity
10% to 90%, noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%, noncondensing
Altitude
up to 16,404 ft (5 km)
Acoustic
Low-speed fan: 37.3 dB, High-speed fan: 47.1 dB; ISO 7779 Dual
speed fan
Frequency
50/60 Hz
Voltage
100 - 240 VAC, rated
(depending on power supply chosen)
Maximum power rating 425 W
PoE power
370 W PoE+
Notes
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all
ports plugged in, and all modules populated.
PoE power is the power supplied by the internal power supply. It is
dependent on the type and quantity of power supplies and may be
DA - 15191
Worldwide QuickSpecs — Version 1 — 5.5.2015
Page 12
QuickSpecs
HP 1950 Switch Series
Technical Specifications
supplemented with the use of an external power supply (EPS).
When supplemented with the use of an HP RPS1600 Redundant
Power System, up to 720W of PoE+ can be supplied. Unit max.
power consumption with RPS is 750W.
Safety
UL 60950; IEC 60950-1; EN 60950-1; GB 4943.1
Emissions
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN
61000-3-2 2000, 61000-3-3; ICES-003 Class A
Management
IMC - Intelligent Management Center; Limited command-line interface; Web browser; SNMP
Manager; HTTPS; RMON1; FTP; Supported by HP IMC and generic SNMP management
platforms. Refer to documentation for MIB support details.
Notes
Transceivers under accessories are recommended versions. Here is the list of fully supported
transceivers. 10G SFP+: JD092B, JD093B, JD094B, JG234A, J9150A, J9151A, J9152A,
J9153A. GE SFP: JD118B, JD119B, JD089B, J4858C, J4859C, J8177C.
Services
Refer to the HP website at www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your
area, please contact your local HP sales office.
HP 1950-48G-2SFP+-2XGT-PoE+(370W) Switch (JG963A)
I/O ports and slots
48 RJ-45 auto-negotiating 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE, IEEE
802.3at)
2 SFP+ fixed 1000/10000 SFP+ ports
2 RJ-45 1/10GBASE-T ports
Additional ports and
slots
1 RJ-45 console port to access limited CLI port
Physical
characteristics
Dimensions
17.32(w) x 16.54(d) x 1.73(h) in (44 x 42 x 4.4 cm) (1U height)
Weight
15.43 lb (7 kg)
Memory and
processor
128 MB flash; Packet buffer size: 3 MB, 1 GB SDRAM
Mounting and
enclosure
Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
10 Gbps Latency
< 1.5 µs
Throughput
up to 130.9 Mpps (64-byte packets)
Routing/Switching
capacity
176 Gbps
Routing table size
32 entries (IPv4), 32 entries (IPv6)
MAC address table
size
16384 entries
Reliability
MTBF (years)
26.8
Environment
Operating temperature 32°F to 113°F (0°C to 45°C)
Electrical
Operating relative
humidity
10% to 90%, noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%, noncondensing
Altitude
up to 16,404 ft (5 km)
Acoustic
Low-speed fan: 47.3 dB, High-speed fan: 50.0 dB; ISO 7779 Dual
speed fan
Frequency
50/60 Hz
DA - 15191
Worldwide QuickSpecs — Version 1 — 5.5.2015
Page 13
QuickSpecs
HP 1950 Switch Series
Technical Specifications
characteristics
Voltage
100 - 240 VAC, rated
(depending on power supply chosen)
Maximum power rating 470 W
PoE power
370 W PoE+
Notes
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all
ports plugged in, and all modules populated.
PoE power is the power supplied by the internal power supply. It is
dependent on the type and quantity of power supplies and may be
supplemented with the use of an external power supply (EPS).
When supplemented with the use of an HP RPS1600 Redundant
Power System, up to 800W of PoE+ can be supplied. Unit max.
power consumption with RPS is 910W.
Safety
UL 60950; IEC 60950-1; EN 60950-1; GB 4943.1
Emissions
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN
61000-3-2 2000, 61000-3-3; ICES-003 Class A
Management
IMC - Intelligent Management Center; Limited command-line interface; Web browser; SNMP
Manager; HTTPS; RMON1; FTP;; Supported by HP IMC and generic SNMP management
platforms. Refer to documentation for MIB support details.
Notes
Transceivers under accessories are recommended versions. Here is the list of fully supported
transceivers. 10G SFP+: JD092B, JD093B, JD094B, JG234A, J9150A, J9151A, J9152A,
J9153A. GE SFP: JD118B, JD119B, JD089B, J4858C, J4859C, J8177C.
Services
Refer to the HP website at www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your
area, please contact your local HP sales office.
Standards and
protocols
(applies to all products
in series)
Device management
RFC 2819 RMON
General protocols
IEEE 802.1D MAC Bridges
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1s Multiple Spanning Trees
IEEE 802.1W Rapid Spanning Tree Protocol
IEEE 802.1X
IEEE 802.3 Type 10BASE-T
IEEE 802.3ab 1000BASE-T
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
IEEE 802.3af Power over Ethernet
IEEE 802.3at PoE+
IEEE 802.3i 10BASE-T
IEEE 802.3x Flow Control
IEEE 802.3z 1000BASE-X
MIBs
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 2021 RMONv2 MIB
RFC 2233 Interface MIB
RFC 2233 Interfaces MIB
RFC 2571 SNMP Framework MIB
DA - 15191
Worldwide QuickSpecs — Version 1 — 5.5.2015
Page 14
QuickSpecs
HP 1950 Switch Series
Technical Specifications
RFC 2572 SNMP-MPD MIB
RFC 2573 SNMP-Notification MIB
RFC 2573 SNMP-Target MIB
RFC 2613 SMON MIB
RFC 2618 RADIUS Client MIB
RFC 2620 RADIUS Accounting MIB
RFC 2665 Ethernet-Like-MIB
RFC 2667 IP Tunnel MIB
RFC 2668 802.3 MAU MIB
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
RFC 2737 Entity MIB (Version 2)
RFC 3414 SNMP-User based-SM MIB
RFC 3415 SNMP-View based-ACM MIB
RFC 3418 MIB for SNMPv3
Network management
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1D (STP)
RFC 1215 SNMP Generic traps
QoS/Cos
IEEE 802.1p (CoS)
Security
IEEE 802.1X Port Based Network Access Control
DA - 15191
Worldwide QuickSpecs — Version 1 — 5.5.2015
Page 15
QuickSpecs
HP 1950 Switch Series
Accessories
HP 1950 Switch Series Transceivers
accessories
HP X121 1G SFP LC SX Transceiver
J4858C
HP X121 1G SFP LC LX Transceiver
J4859C
HP X121 1G SFP RJ45 T Transceiver
J8177C
HP X132 10G SFP+ LC SR Transceiver
J9150A
HP X132 10G SFP+ LC LR Transceiver
J9151A
HP X132 10G SFP+ LC LRM Transceiver
J9152A
Cables
HP 0.5 m Multimode OM3 LC/LC Optical Cable
AJ833A
HP 1 m Multimode OM3 LC/LC Optical Cable
AJ834A
HP 2 m Multimode OM3 LC/LC Optical Cable
AJ835A
HP 5 m Multimode OM3 LC/LC Optical Cable
AJ836A
HP 15 m Multimode OM3 LC/LC Optical Cable
AJ837A
HP 30 m Multimode OM3 LC/LC Optical Cable
AJ838A
HP 50 m Multimode OM3 LC/LC Optical Cable
AJ839A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
QK732A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
QK733A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
QK734A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
QK735A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
QK736A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
QK737A
DA - 15191
Worldwide QuickSpecs — Version 1 — 5.5.2015
Page 16
QuickSpecs
HP 1950 Switch Series
Accessory Product Details
NOTE: Details are not available for all accessories. The following specifications were available at the time of
publication.
HP X121 1G SFP LC
SX Transceiver
(J4858C)
A small form-factor
pluggable (SFP) Gigabit
SX
transceiver that provides
a full-duplex Gigabit
solution
up to 550 m on
multimode fiber.
Ports
1 LC 1000BASE-SX port; Duplex: full only
Physical
characteristics
Dimensions: 2.24(d) x 0.54(w) x 0.48(h) in. (5.69 x 1.37 x 1.22 cm)
Weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP
Environment
Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 203°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)
Electrical
characteristics
Power consumption typical: 0.4 W
Cabling
Type:
Power consumption maximum: 0.7 W
62.5/125 µm or 50/125 µm (core/cladding) diameter, gradedindex, low metal content, multimode fiber optic, complying with
ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively;
Maximum distance:
2-220
2-275
2-500
2-550
m
m
m
m
(62.5 µm core diameter, 160 MHz*km bandwidth
(62.5 µm core diameter, 200 MHz*km bandwidth
(50 µm core diameter, 400 MHz*km bandwidth)
(50 µm core diameter, 500 MHz*km bandwidth)
Cable length: 2-550m
Fiber type: Multi Mode
HP X121 1G SFP LC
LX Transceiver
(J4859C)
Services
Refer to the HP website at www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For
details about services and response times in your area, please
contact your local HP sales office.
Ports
1 LC 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX); Duplex:
full only
Physical
characteristics
Dimensions: 2.24(d) x 0.54(w) x 0.486(h) in. (5.69 x 1.37 x 1.23 cm)
Weight:0.04 lb. (0.02 kg)
HP X121 1G SFP LC LX
Environment
Transceiver: An SFP
format
gigabit transceiver with
LC connectors using LX
Cabling
technology.
Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 212°F (-40°C to 100°C)
Altitude: up to 10,000 ft. (3 km)
Type:
Either single mode or multimode; 62.5/125 µm or 50/125 µm
(core/cladding) diameter, graded-index, low metal content,
multimode fiber optic, complying with ITU-T G.651 and ISO/IEC
793-2 Type A1b or A1a, respectively; Low metal content, singlemode fiber-optic, complying with ITU-T G.652 and ISO/IEC 7932 Type B1;
Maximum distance:
2-550 m (multimode 62.5 µm core diameter, 500 MHz*km
bandwidth)
2-550 m (multimode 50 µm core diameter, 400 MHz*km
DA - 15191
Worldwide QuickSpecs — Version 1 — 5.5.2015
Page 17
QuickSpecs
HP 1950 Switch Series
Accessory Product Details
bandwidth)
2-550 m (multimode 50 µm core diameter, 500 MHz*km
bandwidth)
2-10,000 m (single-mode fiber)
Notes
A mode conditioning patch cord may be needed in some multimode
fiber installations.
Wavelength: 1310nm
Power Consumption: < 500mW Typical
Services
Refer to the HP website at www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For
details about services and response times in your area, please
contact your local HP sales office.
HP X121 1G SFP RJ45 Ports
T Transceiver
(J8177C)
Physical
characteristics
HP X121 1G SFP RJ45
Environment
T Transceiver: An SFP
format
gigabit transceiver with
RJ45 connectors using
1000BaseT technology.
1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T);
Duplex: full only
Dimensions: 2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x 1.4 cm)
Weight: 0.06 lb. (0.03 kg)
Operating temperature: 32°F to 158°F (0°C to 70°C); with 100 LFM
airflow over the SFP module
Operating relative humidity: 0% to 95% @ 75°F (25°C),
noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 0% to 95% @ 77°F (25°C),
noncondensing
Altitude: up to 10,000 ft. (3000 km)
Cabling
Cable type:
1000BASE-T: Category 5 (5E or better recommended), 100 Ù
differential 4-pair unshielded twisted pair (UTP) or shielded twisted
pair (STP) balanced, complying with IEEE 802.3ab 1000BASE-T;
Maximum distance:
100 m
Notes
Power consumption is nominally 1 watt.
For supported platforms and minimum software requirements to
support this product, see the document titled "Support for the
J8177C 1000Base-T Mini-GBIC" on the "HP Mini-GBICs and SFPs"
Manuals Web page.
The J8177C Gigabit copper mini-GBIC is not supported on dualpersonality ports.
The J8177C is capable of 100 Mb operation. This is supported on
only the HP E8200zl, E5400zl, and HP E6200-24G-mGBIC yl
Switches using software version K.12.21 or later. Use the "auto-100"
port setting to enable 100 Mb operation.
Important: The earlier J8177B does not support 100 Mb operation.
When used in the Switch gl 20-Port 10/100/1000 Module (J4908A),
the J8177C mini-GBIC can be installed in either the upper or lower
mini-GBIC
port, but will block access to the other port.
Services
Refer to the HP website at www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For
details about services and response times in your area, please
contact your local HP sales office.
DA - 15191
Worldwide QuickSpecs — Version 1 — 5.5.2015
Page 18
QuickSpecs
HP 1950 Switch Series
Accessory Product Details
HP 0.5 m Multimode
OM3 LC/LC Optical
Cable (AJ833A)
Cabling
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA492AAAC for distances of up to 300 m
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Notes
Cable Specs: Tight buffered duplex fiber optic multimode OM3
50/125 um fiber optic cable and Ethernet assembly with LC duplex
connectors on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125
± 2.0um Coating diameter: 245 ± 10um
Optical glass: Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical glass: Bandwidth: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: 600 / 600 meters
@850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber and designed to work in both the 850
and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km
@ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Services
Refer to the HP website at www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For
details about services and response times in your area, please
contact your local HP sales office.
DA - 15191
Worldwide QuickSpecs — Version 1 — 5.5.2015
Page 19
QuickSpecs
HP 1950 Switch Series
Accessory Product Details
HP 1 m Multimode
OM3 LC/LC Optical
Cable (AJ834A)
Cabling
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA492AAAC for distances of up to 300 m
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Notes
Cable Specs: Tight buffered duplex fiber optic multimode OM3
50/125 um fiber optic cable and Ethernet assembly with LC duplex
connectors on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125
± 2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both
the 850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km
@ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
HP 2 m Multimode
OM3 LC/LC Optical
Cable (AJ835A)
Services
Refer to the HP website at www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For
details about services and response times in your area, please
contact your local HP sales office.
Cabling
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA492AAAC for distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Notes
Cable Specs: Tight buffered duplex fiber optic multimode OM3
50/125 um fiber optic cable and Ethernet assembly with LC duplex
connectors on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125
± 2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both
the 850 and 1300 nm wavelength windows.
DA - 15191
Worldwide QuickSpecs — Version 1 — 5.5.2015
Page 20
QuickSpecs
HP 1950 Switch Series
Accessory Product Details
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km
@ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
HP 5 m Multimode
OM3 LC/LC Optical
Cable (AJ836A)
Services
Refer to the HP website at www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For
details about services and response times in your area, please
contact your local HP sales office.
Cabling
Cable type:
50/125 µm core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA492AAAC for distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Notes
Cable Specs: This specification defines the detail requirements for a
tight buffered duplex fiber optic multimode OM3 50/125 um fiber
optic cable and Ethernet assembly with LC duplex connectors on
one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125
± 2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both
the 850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km
@ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Services
Refer to the HP website at www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For
details about services and response times in your area, please
contact your local HP sales office.
DA - 15191
Worldwide QuickSpecs — Version 1 — 5.5.2015
Page 21
QuickSpecs
HP 1950 Switch Series
Accessory Product Details
HP 15 m Multimode
OM3 LC/LC Optical
Cable (AJ837A)
Cabling
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA492AAAC for distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Notes
Cable Specs: Tight buffered duplex fiber optic multimode OM3
50/125 um fiber optic cable and Ethernet assembly with LC duplex
connectors on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125
± 2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both
the 850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km
@ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
HP 30 m Multimode
OM3 LC/LC Optical
Cable (AJ838A)
Services
Refer to the HP website at: www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For
details about services and response times in your area, please
contact your local HP sales office.
Cabling
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA492AAAC for distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Notes
Cable Specs: Tight buffered duplex fiber optic multimode OM3
50/125 um fiber optic cable and Ethernet assembly with LC duplex
connectors on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125
± 2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both
the 850 and 1300 nm wavelength windows.
DA - 15191
Worldwide QuickSpecs — Version 1 — 5.5.2015
Page 22
QuickSpecs
HP 1950 Switch Series
Accessory Product Details
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km
@ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
HP 50 m Multimode
OM3 LC/LC Optical
Cable (AJ839A)
Services
Refer to the HP website at: www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For
details about services and response times in your area, please
contact your local HP sales office.
Cabling
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA492AAAC for distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Notes
Cable Specs: Tight buffered duplex fiber optic multimode OM3
50/125 um fiber optic cable and Ethernet assembly with LC duplex
connectors on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125
± 2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both
the 850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km
@ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Services
Refer to the HP website at: www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For
details about services and response times in your area, please
contact your local HP sales office.
DA - 15191
Worldwide QuickSpecs — Version 1 — 5.5.2015
Page 23
QuickSpecs
HP 1950 Switch Series
Accessory Product Details
HP Premier Flex
LC/LC Multi-mode
OM4 2 fiber 1m Cable
(QK732A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core Diameter: 50um ±3um, Cladding diameter: 125um ±2um;
Coating diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable
also has a longitudinal white stripe that runs the entire length of the
cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
HP Premier Flex
LC/LC Multi-mode
OM4 2 fiber 2m Cable
(QK733A)
Services
Refer to the HP website at www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For
details about services and response times in your area, please
contact your local HP sales office.
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um;
Coating diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable
also has a longitudinal white stripe that runs the entire length of the
cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Services
Refer to the HP website at www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For
details about services and response times in your area, please
contact your local HP sales office.
DA - 15191
Worldwide QuickSpecs — Version 1 — 5.5.2015
Page 24
QuickSpecs
HP 1950 Switch Series
Accessory Product Details
HP Premier Flex
LC/LC Multi-mode
OM4 2 fiber 5m Cable
(QK734A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um;
Coating diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable
also has a longitudinal white stripe that runs the entire length of the
cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Services
Refer to the HP website at www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For
details about services and response times in your area, please
contact your local HP sales office.
HP Premier Flex
Notes
LC/LC Multi-mode
OM4 2 fiber 15m Cable
(QK735A)
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um;
Coating diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable
also has a longitudinal white stripe that runs the entire length of the
cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Services
Refer to the HP website at www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For
details about services and response times in your area, please
contact your local HP sales office.
DA - 15191
Worldwide QuickSpecs — Version 1 — 5.5.2015
Page 25
QuickSpecs
HP 1950 Switch Series
Accessory Product Details
HP Premier Flex
Notes
LC/LC Multi-mode
OM4 2 fiber 30m Cable
(QK736A)
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um;
Coating diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable
also has a longitudinal white stripe that runs the entire length of the
cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Services
Refer to the HP website at www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For
details about services and response times in your area, please
contact your local HP sales office.
HP Premier Flex
Notes
LC/LC Multi-mode
OM4 2 fiber 50m Cable
(QK737A)
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um;
Coating diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable
also has a longitudinal white stripe that runs the entire length of the
cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Services
Refer to the HP website at www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For
details about services and response times in your area, please
contact your local HP sales office.
DA - 15191
Worldwide QuickSpecs — Version 1 — 5.5.2015
Page 26
QuickSpecs
HP 1950 Switch Series
Accessory Product Details
To learn more, visit: www.hp.com/networking
© Copyright 2015 Hewlett-Packard Development Company, L.P. The information contained herein is subject to
change without notice. The only warranties for HP products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should be construed as constituting an
additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
DA - 15191
Worldwide QuickSpecs — Version 1 — 5.5.2015
Page 27
Download PDF
Similar pages