Fitel Ninja NJ001 - Fiber Optic Cables, Connectors, &

FUSION SPLICERS
Fitel Ninja NJ001
Handheld, Single Fiber Fusion Splicer
Features and Benefits
•
•
Enhanced Ease of Use - The NJ001
features a proportionately wide
splicing chamber for easier fiber
loading.When compared with the
S123C unit, the NJ001 offers 400%
more space around the fiber holders,
making this one of the most userfriendly splicers available.
Improved Visibility - Three LED
lights illuminate the entire splicing
chamber with more than 300 Lux.
This light intensity improves visibility,
making it easier to perform work in
low-light environments. In addition, the
light on the V-groove is 600% brighter
than that of the S123C unit.
•
Industry-First Detachable V-Groove
- The NJ001’s V-groove is detachable
for easy cleaning and optimal
maintenance.
Overview
The FITEL NINJA NJ001 Handheld, Single Fiber Fusion Splicer delivers fast and reliable
fiber splicing under even harsh environmental conditions. Combining portability and ease of
use in a ruggedized body, the NJ001 offers powerful splicing performance with the durability
needed for use in the field.
Product Description
While the NJ001 design is compact and low profile, its large battery capacity helps save on
time by allowing 100 splicing and heating cycles in one charge. Offering consistent splicing
and outstanding ease of use, the NJ001 is suitable for use with all Metro, LAN and FTTx
fibers (including ultra-bend insensitive fibers).
Authorized Distributor of FITEL Products
in the Americas
www.ofsoptics.com
FUSION SPLICERS
Other Features
•
•
•
•
•
•
•
•
•
•
Wider splicing chamber for easier fiber loading
Three LED Lamps - Enhanced illumination for easier splicing in low-light environments
High propulsion motor - A powerful motor with a propulsion of 8N helps ensure stable splicing even for highly rigid cables
including drop and indoor cables
Ruggedized design - The ruggedized body is designed to endure shocks and impact along with exposure to water and dust
Compatibility with Splice-on-Connector (SOC) - The detachable heater clamp allows work with SOC
100 cycles (Splicing and Heating) 1
Available for ALL Metro/LAN/FTTx fibers, including ultra-bend insensitive fibers
Easy maintenance - The industry’s first detachable V-groove allows ease of cleaning and maintenance. The NJ001 also features
toolless electrode replacement and a mirror-free alignment system.
PC interface software - Easy software upgrades, splice management, program editing and export of splice results
Auto Start Function - Heating and splicing processes
Compatible with Splice-on-Connectors
FITEL Splicer SOC partners
CONNECTORS
Under Tough Environments
•
•
•
1
Drop resistant – 76 cm drop tests from 5 different angles
Water resistant – Equivalent to IPX2 rating drip proof 4
Dust resistant – Equivalent to IP5X rating dust proof 4
Drop Resistant
2 | www.ofsoptics.com
4
2
3
4
In semi-auto splicing mode and regular heating mode
“fis” is a registered trademark of Fiber Instrument Sales, Inc.
S
eikoh Giken is a registered trademark of SEIKOH GIKEN CO., LTD
S
tandard operations could be properly carried out after having conducted the
above tests. These tests were performed at the Furukawa Electric Lab with no
significant damage. This does not guarantee that the machine will always be
undamaged under these conditions
Water Resistant
Dust Resistant
Fitel Ninja NJ001
Product Specifications
Applicable Fibers
SM (ITU-T G.652), MM (ITU-T G.651), DSF (ITU-T G.653),
NZD (ITU-T G655), BIF/UBIF (Bend Insensitive Fiber ITU-T G.657)
Cladding Diameter
125 μm
Coating Diameter
250 ~ 900 μm
Fiber Cleave Length
5 to 10 mm or 16 mm
Average Splice Loss
SM: 0.05 dB, MM: 0.02 dB, DSF 0.08 dB, NZD 0.08 dB, BIF/UBIF: 0.05 dB
Splice Time
13 seconds
Heat Time
17 seconds (40 mm sleeve 5 ) , 20 seconds (60 mm sleeve 5 ) (Pre-heat mode 5 )
31 seconds (S922: 40 mm sleeve, S921: 60 mm sleeve) (Regular mode 6 )
Splice Programs
Max. 150
Heat Programs
Max. 30
Automatic Heating Start
Available
Applicable Sleeves
20/40/60 mm
Fiber Holder
Tight holder (Loose tube applicable) or Removal fiber holder system
Tension Test
1.96 N
Splice Return Loss
60 dB or more
Fiber Image Magnification
58X
Splice Memory
Max. 1500
Image Capture Capacity
Last 100 images to be automatically captured + Up to 24 images to be stored permanently
Dimension
124W × 161D × 64.5H mm (not including rubber pad)
139W × 176D × 71H mm (including rubber pad)
Weight
970 g (with battery)
Monitor
3.5” color LCD monitor
Propulsion (motor)
8 N (Designed value)
Data Output
USB ver. 2.0 mini
Battery Capacity7
Typically 100 splice/heat cycles 7
Wind Protection
Max. wind velocity of 15 m/s.
Operating Temperature
-10° to +50°C (without excessive humidity)
Storage Temperature
-40° to +60°C (without excessive humidity)
Humidity
0 to +95% RH (non condensing)
Power Source
AC input 100 to 240 V (50/60 Hz), DC Input 11 to 17 V without any change of hardware
5
T
he heating time may vary depending on the type of sleeves.
6
The first heating cycle after turning the power on can be longer than the standard heating time.
7
T
he number of splicing and heating cycles the machine can perform with a fully charged battery at 20˚C in semi-auto splicing mode and regular
heating mode. The number of cycles may vary depending on the battery status and operating conditions.
Fitel Ninja NJ001 | 3
Fitel Ninja NJ001
Optional Components
Item
1.) Cooling Tray
2.) USB Cable
3.) Battery Pack
P/N
CTX-01
USB-01
S946
Quantity
1
1
1
4.) Tight Holder:
S712T-016
S712T-010
1 pair
1 pair
S712S-160
S712S-250
S712S-500
S712S-900
S712S-LT-L
S712S-LT-R
16 mm Cleave length
10 mm Cleave length
5.) Fiber Holder 160 µm coated fiber
250 µm coated fiber
500 µm coated fiber
900 µm coated fiber
6.) Fiber Holder Loose Tube Fiber (Left side)
Loose Tube Fiber (Right side)
7). SOC Holders
Seiko Giken FC/SC ferrule (9 mm)
Seiko Giken FC/SC ferrule (5 mm)
Seiko Giken LC ferrule (9 mm)
Seiko Giken LC ferrule (5 mm)
Seiko Giken TOUCH Plus SC (9 mm)
Diamond E-2000/F-3000™ LC/SC connector
Seiko Giken Cordage (5 mm)
Seiko Giken Cordage (9 mm)
Diamond Cordage (5 mm)
S712C-SGS9-L
S712C-SGS5-L
S712C-SGL9-L
S712C-SGL5-L
S712C-SGS9C-R
S712C-DM25-L
S712C-SGC5-R
S712C-SGC9-R
S712C-DMC5-R
1 pair
1 pair
1 pair
1 pair
1 pair
1 pair
1
1
1
1
1
1
1
1
1
1
8.) Drop/Indoor Cable Holders
Drop/Indoor Cable Holder
Low-friction Indoor Cable Holder
S712S-1SM-D
S712S-1SM-ST
1 pair
1 pair
9.) Fiber and Cordage Common Holder
S712F-CM
1 pair
Smart Fuse
Software Interface for Machine
4 | www.ofsoptics.com
SF-01
1









Standard Package










Item
1.) F
ITEL NINJA NJ001 Main body
(including battery)
P/N
NJ001-X-A-0001
1
2.) Hard Carrying Case
HCC-03
1
3.)
4.)
5.)
6.)
7.)
ELR-01
S978A
—
D5111
VGC-01
UMC-01
FTS - 347
Spare Electrodes
AC Adapter
AC Cable Cord
Electrode Sharpener
Cleaning Brush
User Manual (CD)
User Manual
Quantity
1 pair
1
1
1
1
1
1
Standard Package
Ordering Information
Code
Description
NJ001-1-V1
Splicer with 16 mm Fiber Holder S712T-016
NJ001-2-V1
Splicer with 10 mm Fiber Holder S712T-010
NJ001-2-EX-10-V1
NJ001-EX-900-V1
For additional information please contact
your sales representative.
Splicer with cleaver, S712T-010 holder, S211B stripper, S943B
battery, wipes and fluid
Splicer with cleaver, S712S-250 and S712S-900 fiber holders,
S211B stripper, S943B battery, wipes and fluid
You can also visit our website at
www.ofsoptics.com or call 1-888-fiberhelp
(1-888-342-3743) USA or 1-770-798-5555
outside the USA.
Fusion Splicer Customer Service,
Training and Service Center
Toll Free: 866-452-9516
Phone: 678-783-1090
Fax: 678-783-1093
Email: splicers@ofsoptics.com
OFS Corporate Headquarters
2000 Northeast Expressway
Norcross, Georgia 30071, USA
Toll Free: 888-Fiber-Help
Intl. Phone: 770-798-5555
Copyright © 2017 OFS Fitel, LLC.
All rights reserved, printed in USA.
OFS Marketing Communications
Doc ID: FITEL-NJ001 D
ate: 11/17
“Bound to Innovate” is a registered
trademark of Furukawa Electric Co., Ltd.
FITEL is a registered trademark of Furukawa
Denki Kogyo Kabushiki Kaisha
DBA Furukawa Electric Co., Ltd.
Furukawa reserves the right to make changes
to the prices and product(s) described in this
document at any time without notice. This
document is for informational purposes only
and is not intended to modify or supplement
any Furukawa warranties or specifications
relating to any of its products or services.
Fitel Ninja NJ001 | 5
Download PDF
Similar pages