Speco Manual1 - Tristate Telecom

Intensifier™ Series
Cameras
HTINTB8/9/10
Please read this manual throughly before operation and keep
it handy for further reference.
CONTENTS
Package Contents
P3
Precautions
P4
O S D Menu
P5
Operating Your Camera
P6
MENU SET UP
P6
LENS SET UP
SHUTTER SPEED
MANUAL
ELC
BLC
P7
P9
P10
P11
P12
P13
AGC
WHITE BAL.
SLC
P14
P16
P17
P18
P19
INTENSIFIER
NEXT
CAMERA TITLE
COLOR
P21
SYNC
P22
P23
P25
P27
MOTION DET.
PRIVACY
REVERSE
P28
DETAIL
Troubleshooting
P30
Specification
P32
Camera Set Up
P33
How to Install
P34
Warranty
P35
2
PACKAGE CONTENTS
Please make up sure that the following items are
included in the package:
1
1
HT - INTB CAMERA
HT - INTB8 CAMERA
1
SUNSHIELD
4
MOUNTING SCREW
1
MOUNTING BASE
1
L - WRENCH
1
USER'S MANUAL
1
VIDEO TEST CABLE
1
POWER PIGTAIL
3
PRECAUTIONS
TO PREVENT A FIRE OR ELECTRONICAL HAZARD PLEASE
USE PROPER POWER CABLE
INSTALLATION SHOULD BE PERFORMED BY QUALIFIED
PERSONNEL
PLEASE USE A UL APPROVED REGULATED 24 VOLT AC
OR 12 VOLT DC POWER SUPPLY
PLEASE USE APPROPRIATE LOW VOLTAGE POWER
CABLE TO PREVENT FIRE OR ELECTRICAL SHOCK.
PLEASE INSURE THAT YOUR INSTALLATION AREA CAN
SUPPORT THE WEIGHT OF THE CAMERA
PLEASE HANDLE THIS CAMERA CAREFULLY:
- DON'T USE A STRONG OR ABRASIVE DETERGENT WHEN
CLEANING THE CAMERA.
- USE A SOFT TISSUE OR LENS CLOTH TO CLEAN THE
FRONT GLASS.
- DON'T EXPOSE THE CAMERA TO DIRECT SUN
4
OSD MENU
◈ Function
SET UP MENU
LENS OPTION
● DC ● MANUAL
SHUTTER
● OFF ● F/L
● MANUAL
WHITE BALANCE
● ATW ● AWC ● MANUAL
SLC - ( Speco Light Compensation )
● OFF ● LOW ● MIDDLE ● HIGH
AUTO GAIN
● OFF ● LOW ● MIDDLE ● HIGH
REDUCE NOISE
● OFF ● LOW ● MIDDLE ● HIGH
INTENSIFIER
● AUTO
● OFF
NEXT PAGE
● CAMERA TITLE ● DAY/ NIGHT ● SYNC
● MOTION
● PRIVACY
● REVERSE
● DETAIL
● DEFAULT ● PAGE1
EXIT
5
MENU SET UP
Menu is adjusted by the OSD button on the camera
1. Press the SET button to access the SETUP mode.
● SETUP menu should be displayed on the monitor screen.
SPECO TECH
LENS TYPE
DC IRIS
SHUTTER SPEED
MANUAL
WHITE BAL
ATW
SLC
HIGH
AUTO GAIN
OFF
REDUCE NOISE
-----
INTENSIFIER
-----
NEXT PAGE
EXIT
2. Select the desired feature using the UP or DOWN buttons
● Move the arrow indicator UP or Down to indicate onto desired feature
by pressing the UP or Down button.
SPECO TECH
Select
desired
LENS TYPE
MANUAL
SHUTTER SPEED
MANUAL
WHITE BAL
ATW
SLC
HIGH
AUTO GAIN
OFF
REDUCE NOISE
-----
INTENSIFIER
-----
NEXT PAGE
EXIT
6
Changr the adjustment
By Left or Right Button
3. MENU SETUP change by using button
● Available value or status should be displayed by pressing the Left or Right button.
● Please press the button until desired features appears.
4. When adjustment is completed, move the arrow indicator to " EXIT " and press the
"SET" button.
CAUTION
Access to submenu by moving
arrow to desired feature
Access is not available to submenu on the mode of " -----".
LENS SETUP
Select the lens by pressing the RIGHT button
1. Move the arrow indicator to " LENS " by UP or Down button on the
SETUP menu.
SPECO TECH
LENS TYPE
MANUAL
SHUTTER SPEED
ELC
WHITE BAL
ATW
SLC
HIGH
AUTO GAIN
OFF
REDUCE NOISE
-----
INTENSIFIER
-----
NEXT PAGE
EXIT
MANUAL : Manual Lens
7
LENS SETUP
2. Select the desired lens type by LEFT or RIGHT button.
SPECO TECH
LENS TYPE
DC IRIS
SHUTTER SPEED
ELC
WHITE BAL
ATW
SLC
HIGH
AUTO GAIN
OFF
REDUCE NOISE
-----
INTENSIFIER
-----
NEXT PAGE
EXIT
DC / VIDEO : DC Auto IRIS Lens
CAUTION
You can control the brightness when DC is selected, Brightness control range will be 1~70.
LENS
BRIGHTNESS
1--------1---------1 35
Press Set to Return
MANUAL : Manual Lens
CAUTION
Color mode is not available when AGC OFF
8
SHUTTER SPEED CONTROL
You can control brightness of screen by the shutter speed.
① Press the SET button to display the setup menu and move the arrow
indicator to " SHUTTER " by the UP or DOWN button.
② Set " SHUTTER " to the desired mode by the LEFT or RIGHT button
OFF : Deactivation
SPECO TECH
LENS TYPE
DC LENS
SHUTTER SPEED
WHITE BAL
ATW
SLC
HIGH
AUTO GAIN
OFF
REDUCE NOISE
-----
INTENSIFIER
-----
NEXT PAGE
EXIT
FLK (1/100):Flicker mode
SPECO TECH
LENS TYPE
MANUAL
SHUTTER SPEED
MANUAL
WHITE BAL
ATW
SLC
HIGH
AUTO GAIN
OFF
REDUCE NOISE
-----
INTENSIFIER
-----
NEXT PAGE
EXIT
9
MANUAL
When setting the shutter speed manually,
You can select from " 1/60 " to " 1/200,000" sec
SPECO TECH
LENS TYPE
MANUAL
SHUTTER SPEED
MANUAL
WHITE BAL
ATW
SLC
HIGH
AUTO GAIN
OFF
REDUCE NOISE
-----
INTENSIFIER
-----
NEXT PAGE
EXIT
SHUTTER TYPE
MANUAL
1/60
Press SET to Return
10
ELC
You can control the BRIGHTNESS.
SPECO TECH
LENS TYPE
MANUAL
SHUTTER SPEED
ELC
WHITE BAL
ATW
SLC
HIGH
AUTO GAIN
OFF
REDUCE NOISE
-----
INTENSIFIER
-----
NEXT PAGE
EXIT
Brightness
BRIGHTNESS
I
I
I 35
Press SET to Return
③ When completed, press " SET "
CAUTION
CAUTION
Avoid pointing the camera directly at a fluorescent lamp.
When the SUTTER menu is set to FLK mode, the INTENSIFIER will not work.
11
BLC( Back Light )
3) SLC ( Speco Light Compensation )
A built - in SR chip provides intelligent light level control to overcome
severe Backlight conditions.
① Press the SET button to display the SETUP menu and move the arrow
indicator to " SLC " by the UP or DOWN button.
② SET " SLC " to desired mode by the LEFT or RIGHT button.
OFF
MIDDLE
LOW
HIGH
SPECO TECH
LENS TYPE
DC
SHUTTER SPEED
WHITE BAL
ATW
SLC
HIGH
AUTO GAIN
OFF
REDUCE NOISE
-----
INTENSIFIER
-----
NEXT PAGE
EXIT
BLC ON
BLC OFF
12
AGC(Auto Gain
4) AGC ( Auto Gain Control )
AGC allows a brighter picture in low light conditions. Higher GAIN level will
yield a brighter screen, but you might notice an increase in noise.
① Press the SET button to display the SETUP menu and move the arrow
indicator to " SLC " by the UP or DOWN button.
② SET " SLC " to desired mode by the LEFT or RIGHT button.
OFF
MIDDLE
LOW
SPECO TECH
LENS TYPE
DC
SHUTTER SPEED
WHITE BAL
ATW
SLC
HIGH
AUTO GAIN
OFF
REDUCE NOISE
-----
INTENSIFIER
-----
NEXT PAGE
EXIT
13
HIGH
WHITE BAL.
5) WHITE BALANCE
① Press the SET button to display the SETUP menu and move the arrow
indicator to " WHITE BALANCE " by the UP or DOWN button.
② SET " WHITE BAL " to desired mode by the LEFT or RIGHT button.
SPECO TECH
LENS TYPE
DC
SHUTTER SPEED
WHITE BAL
AWC
SLC
HIGH
AUTO GAIN
OFF
REDUCE NOISE
-----
INTENSIFIER
-----
NEXT PAGE
EXIT
ATW(Auto Tracking White Balance)
: When color temperature is 2400 ~ 12000K, select this mode.
(ex. A fluorescent lamp, or outdoors)
AWC(Auto White Balance Control)
: The white balance is automatically adjusted in a specific environment.
In order to obtain the best result, press the set button while the camera
focuses on the white paper. If the environment including the light source
is changed, you have to adjust the white balance again.
14
WHITE BAL.
MANUAL : To fine adjust, select the manual mode.
You can increase the red or blue factor while monitoring the difference
on the screen. Set the "MANUAL" mode and press the SET button.
Increase or decrease the value for RED(R-Gain) and BLUE(B-Gain),
watching the color of the picture and press the SET button when you
obtain the best color.
CAUTION
Proper White Balance may not be obtained under the following conditions.
in these case, select the AWC mode.
- When the scene contains mostly high color temperature object, such as
bule sky or sunset.
- When the scene is dim.
- If your camera faces a fluorescent lamp directly or is installed in an area
with constantly changing illumination.
15
DNR
6) REDUCE NOISE ( Digital Noise Redution )
DNR reduce the video noise on the screen.
① Press the SET button to display the SETUP menu and move the arrow
indicator to " REDUCE NOISE " by the UP or DOWN button.
② SET " REDUCE NOISE " to desired mode by the LEFT or RIGHT button.
SPECO TECH
LENS TYPE
DC
SHUTTER TYPE
WHITE BAL
AWC
SLC
HIGH
AUTO GAIN
OFF
REDUCE NOISE
INTENSIFIER
-----
NEXT PAGE
EXIT
OFF : Deactivation
LOW : Low reduction of the noise
MIDDLE : Middle reduction of the noise
HIGH : High reduction of the noise
CAUTION
If you change the "GAIN" menu from AGC-L to AGC-H, sensitivity is increased
as well as noise on the screen.
When the selected "GAIN" menu is OFF, REDUCE NOISE will not work.
16
INTENSIFIER
7) INTENSIFIER
Allows you to get clear images with this function under night or low light conditions.
① Press the SET button to display the SETUP menu and move the arrow
indicator to " INTENSIFIER " by the UP or DOWN button.
② SET " INTENSIFIER " to desired mode by the LEFT or RIGHT button.
SPECO TECH
LENS TYPE
DC
SHUTTER TYPE
WHITE BAL
AWC
SLC
HIGH
AUTO GAIN
OFF
REDUCE NOISE
INTENSIFIER
NEXT PAGE
EXIT
AUTO : When your camera is under night or low light conditions,
select this mode. This mode allows the camera to switch
into B/W in low light conditions.
OFF : Deactivation
CAUTION
If you press"AUTO" button in the intensifier mode, you can control
the amount of intesification from 2X ~ X128.
Increasing the amount of intensification results in brighter pictures under
low light conditions, and may increase image lag.
Increasing the amount of intensification may cause image noise which is to
be expected as a normal condition.
17
NEXT PAGE
8) NEXT PAGE
① Press the SET button to display the SETUP menu and move the arrow
indicator to " NEXT PAGE " by the UP or DOWN button.
② SET " NEXT PAGE " to desired mode by the LEFT or RIGHT button.
SPECO TECH
LENS TYPE
DC
SHUTTER TYPE
WHITE BAL
AWC
SLC
HIGH
AUTO GAIN
OFF
REDUCE NOISE
INTENSIFIER
NEXT PAGE
EXIT
1) CAMERA TILTE
① Press the SET button to display the SETUP menu and move the arrow
indicator to " CAMERA TITLE " by the UP or DOWN button.
② SET " ON " to desired mode by the LEFT or RIGHT button.
CAUTION
If the CAMERA TITLE feature is set to " OFF", the name will not be
displayed on the monitor.
18
CAMERA TITLE
NEXT PAGE
CAMERA TITLE
ON
DAY / NIGHT
SYNC
INT
MOTION
OFF
PRIVACY
OFF
REVERSE
OFF
DETAIL
ON
DEFAULT
PAGE 1
③ Press SET button to access the SETUP mode.
④ You can enter up to 15 characters.
Ⓐ Move the cursor to character-enter location by using LEFT
or RIGHT button.
Ⓑ Select the desired character by using UP or DOWN button.
Ⓒ Press the SET button to confirm the blinking charactor. The first
character is saved and the cursor in the bottom of the screen
moves to the next position.
19
CAMERA TITLE
ⓓ Repeat above steps until you creat the full name you want.
ⓔ Select the position at which the CAMERA TITLE will be located
on the screen.
- Move the cursor to "POS" and press SET button.
- Select the position by using the 4-directional buttons, then press
the SET button to confirm the position.
ⓕ When completed, move the cursor to "END" and press SET button.
CAMERA TITLE
A BCDEFGHIJKLM
NOPQRSTUVWXYZ
a b c d e f g h I j k l m
n o p q r s t u v w x y z
0 1 2 3 4 5 6 7 8 9
CLR POS END
Press
SET
to
Return
CAUTION
If you make a mistake while entering a name, move the cursor to " CLR", press "SET"
button.
After erasing the character from right to left, correct the character again.
20
COLOR
2) COLOR
① Press the SET button to display the SETUP menu and move the arrow
indicator to " COLOR " by the UP or DOWN button.
② SET " COLOR " to desired mode by the LEFT or RIGHT button.
NEXT PAGE
CAMERA TITLE
ON
DAY / NIGHT
SYNC
INT
MOTION
OFF
PRIVACY
OFF
REVERSE
OFF
DETAIL
ON
DEFAULT
PAGE 1
COLOR : The camera will always display a color picture
AUTO : The camera will switch Into B/W in the low light
conditions.
CAUTION
OSD key may not work for 3 seconds when COLOR /BW mode
is changed
21
SYNC
3) SYNC
① Press the SET button to display the SETUP menu and move the arrow
indicator to " SYNC " by the UP or DOWN button.
② SET to desired mode by the LEFT or RIGHT button.
NEXT PAGE
CAMERA TITLE
ON
DAY / NIGHT
SYNC
INT
MOTION
OFF
PRIVACY
OFF
REVERSE
OFF
DETAIL
ON
DEFAULT
PAGE 1
INT : Internal synchronization
L/L : If you choose "L/L", you can adjust the desired phase.
- Press the SET button.
- You can adjust the desired phase from 0 to 270.
CAUTION
When it used in AC power, L/L mode can be used.
In 12V DC, the SYNC menu defaults to "INTERNAL".
22
MOTION DETECTION
4) Whenever your camera detects motion, The words "motion detected"
will appear on the screen.
① Press the SET button to display the SETUP menu and move the arrow
indicator to " MOTION " by the UP or DOWN button.
② SET " MOTION" to desired mode by the LEFT or RIGHT button.
NEXT PAGE
CAMERA TITLE
ON
DAY / NIGHT
SYNC
INT
MOTION
OFF
PRIVACY
OFF
REVERSE
OFF
DETAIL
ON
DEFAULT
PAGE 1
MOTION
AREA SEL
AREA1
AREA STATE
ON
TOP
DOWN
l
l
l
l
l 10
l 25
LEFT
l
l
l
20
RIGHT
l
l
l
40
Press
SET
to
23
Return
MOTION DETECTION
OFF : Deactivation
ON : Activated
- Press the SET button.
- Move the arrow indicator to " AREA SET " using UP and DOWN
button. And then press the SET button.
- Set the areas you want to observe.
MOTION
AREA SEL
AREA1
AREA STATE
ON
TOP
l
l
l
10
DOWN
l
l
l
25
LEFT
l
l
l
20
RIGHT
l
l
l
40
Press
SET
to
Return
6
18
13
5
Max.
Min.
24
PRIVACY
5) PRIVACY: To make an area that you want to be private.
① Press the SET button to display the SETUP menu and move the arrow
indicator to " PRIVACY " by the UP or DOWN button.
② SET " PRIVACY " to desired mode by the LEFT or RIGHT button.
NEXT PAGE
CAMERA TITLE
ON
DAY / NIGHT
SYNC
INT
MOTION
ON
PRIVACY
OFF
REVERSE
OFF
DETAIL
ON
DEFAULT
PAGE 1
PRIVACY
AREA SEL
AREA1
AREA STATE
ON
AREA TONE
l
l
l
80
TOP
DOWN
l
l
l
l
l
l
10
LEFT
l
l
l
20
RIGHT
l
l
l
40
Press
SET
to
25
Return
25
PRIVACY
NEXT PAGE
CAMERA TITLE
ON
DAY / NIGHT
SYNC
INT
MOTION
ON
PRIVACY
ON
REVERSE
OFF
DETAIL
ON
DEFAULT
PAGE 1
OFF : Deactivation
ON : Activated
- Press the SET button.
- Move the arrow to the area you want to mask.
- Set "ON" using LEFT or RIGHT button.
- Press the SET button and then set the area's
bounds as for MOTION detection.
26
REVERSE
6) REVERSE:
① Press the SET button to display the SETUP menu and move the arrow
indicator to " REVERSE " by the UP or DOWN button.
② SET " REVERSE " to desired mode by the LEFT or RIGHT button.
NEXT PAGE
CAMERA TITLE
ON
DAY / NIGHT
SYNC
INT
MOTION
ON
PRIVACY
OFF
REVERSE
ON
DETAIL
ON
DEFAULT
PAGE 1
OFF : Deactivation
ON : Reverse the Image RIGHT or LEFT such as mirror.
REVERSE ON
REVERSE OFF
27
DETAIL
7) DETAIL:
① Press the SET button to display the SETUP menu and move the arrow
indicator to " DETAIL " by the UP or DOWN button.
② SET " DETAIL " to desired mode by the LEFT or RIGHT button.
NEXT PAGE
CAMERA TITLE
ON
DAY / NIGHT
SYNC
INT
MOTION
ON
PRIVACY
OFF
REVERSE
ON
DETAIL
ON
DEFAULT
PAGE 1
DETAIL
LEVEL
Press
I
SET
to
28
I
Return
I8
DETAIL
OFF : Deactivation
ON : DETAIL control mode ( level 0 ~ 31 )
When the level is up, the sharpness will increase.
Control this level to get your best picture quality.
If the level is to high, you can get an unnatural image.
RESET / RETURN
8) DEFAULT : Use to reset your camera to FACTORY DEFAULT setting.
9) PAGE 1: Save the setting of NEXT PAGE function and then move
to SETUP menu.
29
TROUBLE SHOOTING
If you have trouble when operating your camera, please check the following
PROBLEM
SOLUTION
● Check the power cable and line connection
Nothing appears on
the screen
Between the camera and monitor.
● Check that you have properly connected the
VIDEO cables
● Is the camera lens stained with dirt?
Clean the lens with a soft and clean cloth.
The image on the
screen is dim.
● Adjust the monitor as required.
● If the camera is exposed to very strong light,
Change the camera position.
● Adjust the lens focus properly.
The image on the
screen is dark.
The camera is not
working properly
and the surface of
the camera is hot.
MOTION DETECTION
function is not active.
● Adjust the contrast feature of the monitor
● If you have an interediate device, set the
75Ω / Hi-z properly.
● Check that you have properly connected the
Camera to an appropriate power source.
● Have you set " MOTION DET" menu to off?
● Have you set " MD AREA " properly?
30
TROUBLE SHOOTING
If you have trouble when operating your camera, please check the following
PROBLEM
The color of the
picture is not
matched.
The image on the
screen flickers.
L/L mode isn't able
to be selected.
SOLUTION
● Check that you have properly set the "WHITEBAL" menu
● Is the camera facing direct sunlight or fluorecent
lighting? Change the camera position.
● Have you connected the camera to DC power
source? Connect it to AC power source.
31
SPECIFICATION
LOW LIGHT INTENSIFIER / BUILT IN - SELECTABLE TO 128 X
MODEL
HT - INTB8
Image Pick-Up Device
1/3" SONY SUPER HAD CCD - 410K
TV System
NTSC
Total Pixels
NTSC = 811(H) * 508(V)
Effective Pixels
NTSC = 768(H) * 494(V)
Scanning Frequency
NTSC = 15.734KHz(H) / 59.94Hz(V)
Scanning System
2:1 Interlaced
Synchronization
Internal / Line Lock
Resolution
560 TV Lines
Minimum Illumination
0.002 LUX Intensifier @ 128 X
S / N Ratio
More than 50db ( Weight On )
White Balance
ATW / AWC / MANUAL ( 1800'K ~ 10,500'K )
Video Output
Composite Video 1.0Vp - p75ohm / Test Connection
Electronic Shutter Speed
NTSC = Auto / Manual ( 1/60 sec ~ 1/120,000 sec )
OSD
Built - In - Controlled by Internal Buttons
SLC( Speco Light Compensation )
Low - Middle - High - Off Selectable
Auto Gain
Low - Middle - High - Off Selectable
Reduce Noise
Low - Middle - High - Off Selectable
Day & Night ( Color )
On / Auto Selectable ( Electrical )
Sharpness
On / Off ( Level Adjustable )
Privacy
On / Off ( 4 Programmable Zone )
Power Supply
Dual Voltage 12 V DC & 24V AC
Power Comsumption
350mA
Lens
DC Auto iris Varifocal Lens ( 2.8mm ~ 12mm )
Operation Temp.
- 10 ~ 50 Deg C., RH 95% Max.
Storage Temp.
- 20 ~ 60 Deg C., RH 95% Max.
Demension
100mm(W) * 125mm(H) * 208mm(D)
Weight
Approx. 1400(g)
32
HOW TO INSTALL
Dimension & Installation
How to install
Camera adjustment
34
WARRANTY
LIMITED WARRANTY
VIDEO
CAMERA
MONITOR
IR LEDs
Time Labse VCR
Drum Assembly & Heads
DVRs
TN, TT,TS, PC Series
AUDIO
5 Years
1 Year
90 Days
1 Year
3 Years
In Door Speaker
Out Door / Weatherproof Speaker
Amplifiers
PA Horns, Micro Phones,
Metal Detectors, Volume Controls
Megaphones
Electrical Equipment, Not Listed
Above & Balance of Line
15 Years
2 Years
5 Years
2 Years
90 Days
90 Days
Warranty
We warranty all products to be free from any manufacturing or material defects.
This warranty will not extend to any products which have been subjected to
misuse, neglect, accident, or improper installation, used in violation of
instructions furnished by us; or to units which have been repaired or altered
outside of the factory. this limited warranty does not apply to broken cases,
batteries, or other physically damaged parts. Upon request by the customer, the
company will at the customer's expense repackage merchandise in new cartons,
replace missing accessories, and return in resalable conditional. Unless
requested, the company will replace and return all merchandise in the
packaging in which it was received. This warranty is in lieu of all expressed
warranties, expressed or implied, and of all obligations or liability on our part,
And we neither assume nor authorize any representative or other person to
assume for us any obligation or liability. In no event shall we be liable for
incidental or consequential damages arising from the use of the product, or for
any delay in the use of this product do to causes beyond our control. Some
states do not allow limitations of how long an implied warranty lasts and/or do
not allow the exclusion or limitation of consequential damages. The above
limitations on implied warranty and consequential damages may not apply to
you. This warranty gives you specific legal rights. You may have other rights
which vary from state to state. See actual warranty statement included with
product for limitations and exclusions where applicable. This limited warranty
extends to products listed in the company's current price schedule.
35
MEMO
36
MEMO
37
MEMO
38
Download PDF
Similar pages