Anti-Vandal Backlit PIN & Prox Standalone Controller
This advanced anti-vandal, 500 user standalone controller features shiny blue illuminated
metal keys for PIN code and a built-in proximity reader for RFID user credentials. AC-Q42HB
has a rugged metal construction ideal for high traffic environments. This model comes with
removable terminal blocks, for quick installation, and has advanced programming options.
General Description
The AC-Q42HB anti-vandal controller has a unique
combination of large backlit metal keys and a builtin heater. It offers a higher level of user
accessibility in low light areas.
AC-Q42HB has an attractive profile, free from sharp
edges, ideal for installations where style and
functionality are highly important.
This feature-rich unit offers all weather operation,
with flexible programming capabilities including a
unique “code search” for simple user management.
Non-volatile memory protects the storage of user
database, modes and parameters.
Main Features
Built-in 125 kHz RFID card reader
500 users can have PIN and / or RFID
credentials for granting access.
Smooth attractive design, with anti-vandal
Highly-visible blue backlit keypad.
Optical tamper detection output.
Automatic internal heater prevents key freeze at
-20˚C (4˚F).
10 programmable modes for auxiliary input and
output (2 Amp Form C Relay.)
3 operational Security Levels can be selected
with special PIN codes.
2 Amp Form C Lock Strike Relay, for fail-safe and
fail-secure, with input for REX.
Supports up to 8-digit PIN codes, with timed
wrong code lockout after 3 wrong attempts.
Supports: Door Ajar, Forced, Shunt, Monitor, and
Secure mode.
2 tri-colored LEDs and integral sounder for
programming and operation.
Door bell key feature operation (from '¿' bell
key), with Rosslare's accessory BLD40.
Removable terminal blocks are used for
connecting the wires to the unit.
Anti-Vandal Backlit PIN & Prox Standalone Controller
Product Specifications
Operating Voltage Range:
Input Current:
Relay Outputs:
Proximity Card Reader:
12 to 24VDC, from a regulated power supply
16 to 24VAC, from a transformer
(Heater Off) Standby: 85mA, Maximum: 145mA, at 12VDC
(Heater On) Standby: 565mA, Maximum: 625mA, at 12VDC
Lock Strike: 2A, N.O. and N.C.
Auxiliary: 2A, N.O. and N.C.
Optical back tamper sensor, O.C. active low 32mA max sink current
REX: N.O. Dry Contact
Auxiliary (In/Monitor): N.O. Dry Contact. 10 Programmable modes
Maximum read range*: 65mm (2.5")
Modulation: ASK at 125 kHz
Compatible cards: All 26-Bit EM Cards
* Measured using Rosslare Prox Card AT-R14 or equivalent. Range also depends on electrical
environment and proximity to metal.
• Capacity:
• Keypad:
• User Levels:
• Security Modes:
• Audio/Visual:
500 Users, single / dual code each
3x4 Keys for local programming and 4 to 8 digit PIN codes entry
Normal / Secure, Master
Normal, Bypass and Secure
Interface for BL-D40 (bell, chime and siren enunciator)
Two tri-color LED indicators, Built-in sounder
Rugged metal enclosure, highly strong construction, blue backlit metallic
keys. Suitable for extremely harsh environments.
• Operating Environment:
• Operating Temperature:
• Operating Humidity:
• RFI Protection:
Water resistant, suitable for outdoor use, meets IP54
-20oC to 60oC (-4oF to 140oF). Built-in heater to prevent key freezing
0 to 95% (non-condensing)
> 20 V/m up to 1000 MHz
• Dimensions:
• Weight:
120mm x 76mm x 27mm (4.72" x 3" x 1.06")
440g (1 lbs)
System Components
A variety of Rosslare's proximity
cards and tags is available for use
with this unit.
The BL-D40 alarm, chime and door
bell enunciator / strobe unit can
be interfaced to the unit, as well
as the EX-01 Push to Exit button.
Additional Information
The AC-Q42HB is covered by Rosslare’s 2-year Limited Product Warranty.
For sales information or product documentation, please visit our website:
Distributed by:
© Copyright Rosslare 2005-2006
Download PDF
Similar pages