Design for Rugged Excellence
V0.52
RGS-P9000 Series
Industrial modular rack mount managed
Gigabit Ethernet switch with 4 slots
Features
Modular designed makes network planning easy
Supports O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) for Ethernet
Redundancy
Open-Ring support the other vendor’s ring technology in open architecture
O-Chain allow multiple redundant network rings
Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function
Support IEEE 1588v2 clock Synchronization
Supports IPv6 new internet protocol version
Support Modbus TCP protocol
Provided HTTPS/SSH protocol to enhance network security
Support IEEE 802.3az Energy-Efficient Ethernet
technology
Supports SMTP client
Supports IP-based bandwidth management
Supports application-based QoS management
Supports Device Binding security function
Supports DOS/DDOS auto prevention
IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
Supports SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
Support ACL, TACACS+ and 802.1x User Authentication for security
Supports 10K Bytes Jumbo Frame
Multiple notification for warning of unexpected event
Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configuration
Support LLDP Protocol
Supports redundant power inputs with optional voltage range
19 inches rack mountable design
Introduction
RGS-P9000 is modular managed redundant ring Ethernet switch with 4 slots.
With completely support of Ethernet
Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can
protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery
technology.
And support wide operating temperature from -40 oC to 70 oC (If use 10G SFP module then operating
temperature is -20 oC ~ 60 oC).
RGS-P9000 can also be managed centralized and convenient by Open-Vision, Except the
Web-based interface, Telnet and console (CLI) configuration.
Therefore, the switch is one of the most reliable choice for
highly-managed and Fiber Ethernet power substation and rolling stock application.
* All specifications are subject to change without notice.
Design for Rugged Excellence
V0.52
Ring : O-Ring is ORing’s proprietary redundant ring technology, with recovery time of less 30 milliseconds and up to 250
nodes.
The O-Ring redundant ring technology can protect mission-critical application from network interruptions or
temporary malfunction with its fast recover technology.
Open-Ring : Open-Ring is an enhanced redundant technology that makes ORing’s switches compatible with other vendor’s
proprietary redundant ring technologies.
It enables ORing’s switches to form a single ring with other vendor’s switch.
In
cases where the ring is setup using proprietary technology, ORing offers a compatibility service where ORing can make its
switches compatible with your particular network requirements.
O-Chain : O-Chain is the revolutionary network redundancy technology that provides the add-on network redundancy
topology for any backbone network, O-Chain allows multiple redundant network rings of different redundancy protocols to join
and function together as a larger and more robust compound network topology.
O-Chain providing ease-of-use while
maximizing fault-recovery swiftness, flexibility, compatibility, and cost-effectiveness in one set of network redundancy
topology.
MRP : Media Redundancy Protocol (MRP) is a data network protocol standardized by the IEC 62439-2. It allows rings of
Ethernet switches to overcome any single failure with recovery time much faster than achievable with Spanning Tree Protocol.
IP-based Bandwidth Management : The switch provide advanced IP-based bandwidth management which can limit the
maximum bandwidth for each IP device.
User can configure IP camera and NVR with more bandwidth and limit other device
bandwidth.
Application-Based QoS : The switch also support application-based QoS.
Application-based QoS can set highest priority
for data stream according to TCP/UDP port number.
Device Binding Function : ORing special Device Binding function can only permit allowed IP address with MAC address to
access the network.
Hacker cannot access the IP surveillance network without permission.
It can avoid hacker from
stealing video privacy data and attacking IP camera, NVR and controllers.
Advanced DOS/DDOS Auto Prevention : The switch also provided advanced DOS/DDOS auto prevention.
If there is any
IP flow become big in short time, the switch will lock the source IP address for certain time to prevent the attack. It’s
hardware based prevention so it can prevent DOS/DDOS attack immediately and completely.
Modbus TCP : This is a Modbus variant used for communications over TCP/IP networks.
IEEE 802.3az Energy-Efficient Ethernet: This is a set of enhancements to the twisted-pair and backplane Ethernet family
of networking standards that will allow for less power consumption during periods of low data activity. The intention was to
reduce power consumption by 50% or more.
IEEE 1588v2 Technology : The IEEE 1588v2 technology can fulfill precision time synchronization requirements for
protection and control applications.
Modular Designed : Modular designed can makes network planning easy and allow greater flexibility by letting you install
other Ethernet/Optical fiber modular.
* All specifications are subject to change without notice.
Design for Rugged Excellence
V0.52
Open-Vision
ORing’s switches are intelligent switches.
Different from other traditional redundant switches, ORing provides a set of
Windows utility (Open-Vision) for user to manage and monitor all of industrial Ethernet switches on the industrial network.
Commander
Host Monitor
Topology View
Dimension
* All specifications are subject to change without notice.
Design for Rugged Excellence
V0.52
Specifications
ORing Switch Model
RGS-P9000-LV
RGS-P9000-HV
Physical Ports
Slot Number
4 (up to 3 slots for 8x1G ports and 1 slot for 4x10G port)
Technology
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
IEEE 802.z for 1000Base-X
IEEE 802.3ae for 10Gigabit Ethernet
IEEE 802.3x for Flow control
Ethernet Standards
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table
8k
Priority Queues
8
Processing
Store-and-Forward
Switching latency: 7 us
Switching bandwidth: 128Gbps
Switch Properties
Max. Number of Available VLANs: 256
IGMP multicast groups: 128 for each VLAN
Port rate limiting: User Define
Jumbo frame
Up to 10K Bytes
Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
Single 802.1x and Multiple 802.1x
MAC-based authentication
QoS assignment
Guest VLAN
Security Features
MAC address limit
TACACS+
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security
Web and CLI authentication and authorization
Authorization (15 levels)
IP source guard
IEEE 1588v2 clock synchronization
IEEE 802.1D Bridge, auto MAC address learning/aging and MAC address (static)
Multiple Registration Protocol (MRP)
MSTP (RSTP/STP compatible)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging
IGMP v2/v3 Snooping
Software Features
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client
DHCP Relay
Modbus TCP
DNS client proxy
SMTP Client
Modbus TCP
Network Redundancy
O-Ring
Open-Ring
* All specifications are subject to change without notice.
Design for Rugged Excellence
V0.52
O-Chain
MRP
MSTP (RSTP/STP compatible)
RS-232 Serial Console Port
RS-232 in RJ-45 connector with console cable.
115200bps, 8, N, 1
LED Indicators
System Ready Indicator (PWR)
Green : Indicates that the system ready.
Power Indicator (PWR1 / PWR2)
Green : Power LED x 2
Ring Master Indicator (R.M.)
Green : Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator (Ring)
Fault Indicator (Fault)
Reset To Default Running Indicator
(DEF)
Supervisor Login Indicator (RMT)
The LED is blinking when the system is upgrading firmware
Green : Indicates that the system operating in O-Ring mode
Green Blinking : Indicates that the Ring is broken.
Amber : Indicate unexpected event occurred
Green : System resets to default configuration
Green : System is accessed remotely
Link/Act(LK/ACT) / Speed(SPD) / Duplex(FDX) / Remote (RMT) green LED indicator x 4
Smart LED Display system
Mode select Button (MODE) :
Link/Act(LK/ACT) / Speed(SPD) / Duplex(FDX)
/ Remote (RMT) mode select
button
Port 1 ~ 28 Link/Act(LK/ACT) LED show : Green x 28
Fault Contact
Relay
Relay output to carry capacity of 1A at 24VDC
Power
Dual 24/48VDC (20~72VDC) power inputs at terminal
Dual 88~264VAC / 100~370VDC power inputs at
block
terminal block
Power consumption (Typ.)
46Watts max.
43.5Watts max.
Overload current protection
Present
Redundant power input modular
Physical Characteristic
Enclosure
19 inches rack mountable
Weight (g)
6450g
Dimension (W x D x H)
440 (W) x 325 (D) x 44 (H) mm (17.32x12.8x1.73 inches)
6600g
Environmental
Storage Temperature
Operating Temperature
Operating Humidity
-40 to 85oC (-40 to 185oF)
10G SFP+ module absent : -40 to 70oC (-40 to 158oF )
10G SFP+ module used: -20 to 60 oC (-4 to 140oF )
5% to 95% Non-condensing
Regulatory Approvals
EMI
FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
EN61000-4-2 (ESD)
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EMS
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Warranty
5 years
* All specifications are subject to change without notice.
Design for Rugged Excellence
V0.52
Ordering Information
Model Name
RGS-P9000-LV
Description
Industrial modular rack mount managed Gigabit Ethernet switch with 4 slots, low-voltage
power input
Available
Model
RGS-P9000-HV_US
Industrial modular rack mount managed Gigabit Ethernet switch with 4 slots, high-voltage
power input, US power cord
RGS-P9000-HV_EU
Industrial modular rack mount managed Gigabit Ethernet switch with 4 slots, high-voltage
power input, EU power cord
Packing List
RGS-P9000 x 1
ORing Tool CD x 1
Rack-mount Kit x 1
Console Cable x 1
Quick Installation Guide x 1
Optional Accessories
Open-Vision M500 : Powerful Network Management Windows Utility Suit, 500 IP devices
SFP100 series : 100Mbps SFP optical transceiver
SFP 1G series : 1Gbps SFP optical transceiver
SFP 10G series : 10Gbps SFP optical transceiver
DR-75 series : 75 Watts DIN-Rail power supply
DR-120 series : 120 Watts DIN-Rail power supply
Optional Module
For 10G slot:
SWM-02GP+
Industrial 2-port 10G SFP+ module with 2x10GBase-X, SFP+ socket
For 10G slot:
SWM-04GP+
Industrial 4-port 10G SFP+ module with 4x10GBase-X SFP+ ports
* All specifications are subject to change without notice.
Design for Rugged Excellence
V0.52
For 1G slot:
SWM-80GT
Industrial 8-port Gigabit Ethernet switch module with 8x10/100/1000Base-T(X) ports
For 1G slot:
SWM-08GP
Industrial 8-port Gigabit fiber module with 8x100/1000Base-X, SFP socket
For 1G slot:
SWM-04GF-MM/SS-SC
Industrial 4-port Gigabit fiber module with 4x1000Base-FX SC Fiber ports
For 1G slot:
SWM-04FX-MM/SS-SC
Industrial 4-port fiber module with 4x100Base-FX SC Fiber ports
For 1G slot:
SWM-04GF-MM/SS-ST
Industrial 4-port Gigabit fiber module with 4x1000Base-FX ST Fiber ports
For 1G slot:
SWM-04FX-MM/SS-ST
Industrial 4-port fiber module with 4x100Base-FX ST Fiber ports
For 1G slot:
SWM-04GF-MM/SS-LC
Industrial 4-port Gigabit fiber module with 4x1000Base-FX LC Fiber ports
For 1G slot:
SWM-04FX-MM/SS-LC
Industrial 4-port fiber module with 4x100Base-FX LC Fiber ports
* All specifications are subject to change without notice.
Download PDF
Similar pages