Cisco UCS C220 M3 High-Density Large Form Factor Rack

Spec Sheet
Cisco UCS C220 M3
High-Density Rack Server
(Large Form Factor Hard
Disk Drive Model)
CISCO SYSTEMS
170 WEST TASMAN DR
SAN JOSE, CA, 95134
WWW.CISCO.COM
PUBLICATION HISTORY
REV B.4
JULY 14, 2014
OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
DETAILED VIEWS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Chassis Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Chassis Rear View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
BASE SERVER STANDARD CAPABILITIES and FEATURES . . . . . . . . . . . . . . . . . 8
CONFIGURING the SERVER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
STEP
STEP
STEP
STEP
STEP
STEP
STEP
STEP
STEP
STEP
STEP
STEP
STEP
STEP
STEP
STEP
1 VERIFY SERVER SKU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2 SELECT CPU(s) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3 SELECT MEMORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4 SELECT RAID CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
5 SELECT HARD DISK DRIVES (HDDs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
6 SELECT PCIe OPTION CARD(s) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
7 ORDER OPTIONAL NETWORK CARD ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . 34
8 ORDER POWER SUPPLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
9 SELECT AC POWER CORD(s) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
10 ORDER OPTIONAL REVERSIBLE CABLE MANAGEMENT ARM . . . . . . . . . . . . . . . . . 42
11 ORDER A TRUSTED PLATFORM MODULE (OPTIONAL) . . . . . . . . . . . . . . . . . . . . . 43
12 ORDER CISCO FLEXIBLE FLASH SD CARD MODULE (OPTIONAL) . . . . . . . . . . . . . . . 44
13 ORDER USB 2.0 DRIVE (OPTIONAL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
14 SELECT OPERATING SYSTEM AND VALUE-ADDED SOFTWARE . . . . . . . . . . . . . . . . 46
15 SELECT OPERATING SYSTEM MEDIA KIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
16 SELECT SERVICE and SUPPORT LEVEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
OPTIONAL STEP - ORDER RACK(s) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
OPTIONAL STEP - ORDER PDU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
SUPPLEMENTAL MATERIAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
CHASSIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
CPUs and DIMMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Physical Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Memory Population Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
DIMM Population Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Recommended Memory Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Additional DIMM Populations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Low-Voltage DIMM Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
RAID Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
RAID Option ROM (OPROM) Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Serial Port Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Upgrade and Servicing-Related Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Drive Blanking Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Upgrading your Server from Intel Xeon E5-2600 to Intel Xeon E5-2600 v2 CPUs (or downgrading from
Intel Xeon E5-2600 v2 to Intel Xeon E5-2600 CPUs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Adding an Additional CPU (with CPU heat sink) . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Motherboard Lithium Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
CPU Removal and Installation (“pick n place”) Tool Set . . . . . . . . . . . . . . . . . . . . . 72
Thermal Grease (with syringe applicator) for CPU to Heatsink Seal . . . . . . . . . . . . . . 72
Air Baffle Replacement Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
CPU Heat Sink Cleaning Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
RACKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
PDUs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
KVM CABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Motherboard USB and SD Ports, and RAID Card Backup Location . . . . . . . . . . . . . . . . . . . . 78
TECHNICAL SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Dimensions and Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
2
Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
CONTENTS
Power Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Compliance Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
3
4
Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
OVERVIEW
OVERVIEW
The Cisco® UCS C220 M3 rack server is designed for performance and density over a wide range of business
workloads from web serving to distributed database.
The enterprise-class UCS C220 M3 server extends the capabilities of Cisco’s Unified Computing System
portfolio in a 1U form factor with the addition of the Intel® Xeon E5-2600 v2 and E5-2600 series processor
family CPUs that deliver significant performance and efficiency gains. In addition, the UCS C220 M3 server
provides 16 DIMM slots, four 3.5-inch drives and 2 x 1 GbE LOM ports delivering outstanding levels of density
and performance in a compact 1U package.
Figure 1
Cisco UCS C220 M3 High-Density LFF Rack Server
Front View
Rear View
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
5
DETAILED VIEWS
DETAILED VIEWS
Chassis Front View
Figure 2 shows the Cisco UCS C220 M3 High-Density LFF Rack Server.
Figure 2
Chassis Front View
1
5
3
4
6
7
8
HDD1
HDD2
HDD3
9
HDD4
331684
2
10
1
Power button/power status LED
6
Power supply status LED
2
Identification button/LED
7
Network link activity LED
3
System status LED
8
Asset tag (serial number)
4
Fan status LED
9
KVM connector (used with KVM cable that
provides two USB, one VGA, and one serial
connector)
5
Temperature status LED
10
Drives (up to four hot-swappable 3.5-inch
drives)
For more information about the KVM cable connection, see KVM CABLE, page 77.
6
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
DETAILED VIEWS
Chassis Rear View
Figure 3 shows the external features of the rear panel.
Chassis Rear View
1
PSU1
2
3
PCIe1
PCIe2
PSU2
4
5
331683
Figure 3
6
7
8
9
1
Power supplies (up to two)
6
One 10/100/1000 Ethernet dedicated
management port
2
Slot 2: Low-profile PCIe slot on riser:
7
Dual 1-GbE ports
(half-height, half-length, x16 connector, x8
lane width)
3
Slot 1: Standard-profile PCIe slot on riser:
(LAN1 and LAN2)
8
USB ports
(full-height, half-length, x24 connector, x16
lane width) (supports Cisco Virtual Interface
Card (VIC)
4
VGA video connector
9
Rear Identification button/LED
5
Serial port (RJ-45 connector)1
—
—
Notes . . .
1. Serial port pinout details are given in Serial Port Details, page 69.
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
7
BASE SERVER STANDARD CAPABILITIES and FEATURES
BASE SERVER STANDARD CAPABILITIES and FEATURES
Table 1 lists the capabilities and features of the base server. Details about how to configure the server for
a particular feature or capability (for example, number of processors, disk drives, or amount of memory)
are provided in CONFIGURING the SERVER, page 11.
Table 1 Capabilities and Features
Capability/Feature
Description
Chassis
One rack unit (1RU) chassis
CPU
One or two Intel® Xeon E5-2600 v2 or E5-2600 series processor family CPUs
Chipset
Intel® C600 series chipset
Memory
16 slots for registered or unbuffered ECC DIMMs (RDIMMs or UDIMMs) or
load-reduced DIMMs (LRDIMMs)
Multi-bit Error
Protection
This server supports multi-bit error protection.
NIC
Embedded dual-port Intel i350 PCIe-based Gigabit Ethernet controller, supporting
the following:
Expansion slots
Internal storage
devices
Cisco Flexible
Flash drives
■
Pre-Execution Boot (PXE boot)
■
iSCSI boot
■
Checksum and segmentation offload
■
NIC teaming
Two PCIe slots (on a riser card)
■
One full-height profile, half-length slot with x24 connector and x16 lane
■
One half-height profile, half-length slot with x16 connector and x8 lane
Drives are installed into front-panel drive bays that provide hot-pluggable access.
■
Large Form Factor (LFF) drives. Up to four 3.5-inch SAS or SATA
hot-swappable hard disk drives (HDDs).
■
The server also contains one internal USB 2.0 port on the motherboard that
you can use with a USB thumb drive for additional storage.
■
UCS Storage Accelerator are also available. These PCIe flash storage devices
provide independent high-speed storage.
The server supports up to two internal Cisco Flexible Flash drives (SD cards).
■
■
■
8
The first SD card is pre-loaded with four virtual drives. The four virtual drives
contain, respectively, the Cisco Server Configuration Utility, the Cisco Host
Upgrade Utility, the Cisco C-Series server drivers set, and a blank virtual drive
on which you can install an OS or a hypervisor.
4 GB is available for general use
The second SD card is blank and can be used to mirror the first SD card. It can
be used to protect the Hypervisor Partition with RAID1.
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
BASE SERVER STANDARD CAPABILITIES and FEATURES
Capability/Feature
Video
Storage controllers
Description
The Emulex Pilot 3 Integrated Baseboard Management Controller provides video:
■
Matrox G200e video controller
■
Integrated 2D graphics core with hardware acceleration
■
Supports all display resolutions up to 1920 x 1200 x 16 bpp resolution at 60 Hz
■
24-bit color depth for all resolutions less than 1600x1200
■
256 MB video memory
■
Embedded RAID (3 Gbs)
• Embedded SATA-only RAID controller, supporting up to four SATA-only
drives (RAID 0, 1, 10), or
• LSI ROM1 RAID upgrade, supporting up to four SAS+SATA drives (RAID 0, 1, 10), or
• LSI ROM15 RAID upgrade, supporting up to four SAS+SATA drives (RAID 0, 1, 5, 10).
■
Mezzanine Cards (6 Gbs) - two versions
• Cisco UCSC RAID SAS 2008M-8i Mezzanine Card supports up to eight
SAS+SATA drives (limited to four drives for the C220 M3 LFF chassis)
supporting RAID 0, 1, 5, 10, and 50. This card has a product ID (PID) of
UCSC-RAID-11-C220.
• Cisco UCSC RAID SAS 2008M-8i Mezzanine Card supports up to eight
SAS+SATA drives (limited to four drives for the C220 M3 LFF chassis)
supporting RAID 0, 1, and 10. This card has a product ID (PID) of
UCSC-RAID-MZ-220.
■
PCIe RAID COntrollers (6 Gbs)
• LSI MegaRAID SAS 9271-8i or 9271CV-8i RAID 8-port PCIe RAID controllers
with on-board 1 GB data cache and chassis-mounted (remote) supercap for
data cache power backup (supercap not present on 9271-8i), supporting
RAID levels 0, 1, 5, 6, 10, 50, 60 and up to eight internal SAS+SATA drives
(limited to four drives for the C220 M3 LFF chassis).
• LSI MegaRAID 9285CV-8e, or 9286CV-8e PCIe RAID controllers with on-board
1 GB cache and chassis-mounted (remote) supercap for data cache power
backup, supporting RAID levels 0, 1, 5, 6, 10, 50, 60. Supports 8 external
SAS ports (up to 240 external drives).
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
9
BASE SERVER STANDARD CAPABILITIES and FEATURES
Capability/Feature
Interfaces
Description
■
Rear panel
• One RJ45 serial port connector
• Two USB 2.0 port connectors
• One DB15 VGA connector
• Two RJ-45 10/100/1000 Ethernet port connectors
• One RJ-45 10/100/1000 Ethernet management port, using Cisco Integrated
Management Controller (CIMC) firmware
■
Various PCIe card ports (dependent on which cards are installed)
• Converged Network Adapter (CNA) ports
• Network Interface Card (NIC) ports
• Host Bus Adapter (HBA) ports
■
Front panel
• One KVM console connector (supplies two USB, one VGA, and one serial
connector)
WoL
The 1-Gb Base-T Ethernet LAN ports support the wake-on-LAN (WoL) standard.
InfiniBand
The bus slots in this server support the InfiniBand architecture.
Front Panel
A front panel controller provides status indications and control buttons
Power subsystem
Up to two 450 W (AC) , 650 W, (AC), or 930 W (DC) power supplies. One is
mandatory; one more can be added for 1 + 1 redundancy.
ACPI
This server supports the advanced configuration and power interface (ACPI) 4.0
standard.
Fans
Chassis:
■
Five hot-swappable fans for front-to-rear cooling
Power supply:
■
Integrated
management
processor
10
Each power supply is equipped with a fan.
BMC running Cisco Integrated Management Controller (CIMC) firmware.
Depending on your CIMC settings, the CIMC can be accessed through the 1-GbE
dedicated management port, the 1-GbE LOM ports, or a Cisco virtual interface
card (VIC).
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
CONFIGURING the SERVER
CONFIGURING the SERVER
Follow these steps to configure the Cisco UCS C220 M3 High-Density LFF Rack Server:
■
STEP 1 VERIFY SERVER SKU, page 12
■
STEP 2 SELECT CPU(s), page 13
■
STEP 3 SELECT MEMORY, page 16
■
STEP 4 SELECT RAID CONFIGURATION, page 22
■
STEP 5 SELECT HARD DISK DRIVES (HDDs), page 29
■
STEP 6 SELECT PCIe OPTION CARD(s), page 31
■
STEP 7 ORDER OPTIONAL NETWORK CARD ACCESSORIES, page 34
■
STEP 8 ORDER POWER SUPPLY, page 38
■
STEP 9 SELECT AC POWER CORD(s), page 39
■
STEP 10 ORDER OPTIONAL REVERSIBLE CABLE MANAGEMENT ARM, page 42
■
STEP 11 ORDER A TRUSTED PLATFORM MODULE (OPTIONAL), page 43
■
STEP 12 ORDER CISCO FLEXIBLE FLASH SD CARD MODULE (OPTIONAL), page 44
■
STEP 13 ORDER USB 2.0 DRIVE (OPTIONAL), page 45
■
STEP 14 SELECT OPERATING SYSTEM AND VALUE-ADDED SOFTWARE, page 46
■
STEP 15 SELECT OPERATING SYSTEM MEDIA KIT, page 49
■
STEP 16 SELECT SERVICE and SUPPORT LEVEL, page 50
■
OPTIONAL STEP - ORDER RACK(s), page 55
■
OPTIONAL STEP - ORDER PDU, page 56
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
11
CONFIGURING the SERVER
STEP 1
VERIFY SERVER SKU
Verify the product ID (PID) of the server as shown in Table 2.
Table 2 PID of the C220 M3 High-Density LFF Rack Base Server
Product ID (PID)
UCSC-C220-M3L
Description
UCS C220 M3 LFF, no CPU, memory, HDD, power supply, SD card, or PCIe cards,
with rail kit
The Cisco C220 M3 server:
■
Includes one tool-less rail kit (UCSC-RAIL1)
■
Does not include power supply, CPU, memory, hard disk drives (HDDs), SD cards, or plug-in
PCIe cards.
NOTE: Use the steps on the following pages to configure the server with
the components that you want to include.
12
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
CONFIGURING the SERVER
STEP 2
SELECT CPU(s)
The standard CPU features are:
■
Intel Xeon E5-2600 v2 and E5-2600 series processor family CPUs (see the following link for
instructions on how to upgrade your server from Intel Xeon E5-2600 to Intel Xeon E5-2600 v2
CPUs:
http://preview.cisco.com/en/US/docs/unified_computing/ucs/c/CPU/IVB/install/IVB-C.html
■
Intel C600 series chipset
■
Cache size of up to 30 MB
Select CPUs
The available CPUs are listed in Table 3.
Table 3 Available Intel CPUs: E5-2600 and E5-2600 v2 Series Processor Family CPUs
Intel
Number
Product ID (PID)
Clock
Freq
(GHz)
Power
(W)
Cache
Size
(MB)
Cores
QPI
Highest DDR3
DIMM Clock
Support
(MHz)1
Intel Xeon E5-2600 v2
UCS-CPU-E52697B
E5-2697B v2
2.70
130
30
12
8 GT/s
1866
UCS-CPU-E52695B
E5-2695B v2
2.40
115
30
12
8 GT/s
1866
UCS-CPU-E52690B
E5-2690B v2
3.00
130
25
10
8 GT/s
1866
UCS-CPU-E52680B
E5-2680B v2
2.80
115
25
10
8 GT/s
1866
UCS-CPU-E52670B
E5-2670B v2
2.50
115
25
10
8 GT/s
1866
UCS-CPU-E52667B
E5-2667B v2
3.30
130
25
8
8 GT/s
1866
UCS-CPU-E52660B
E5-2660B v2
2.20
95
25
10
8 GT/s
1866
UCS-CPU-E52650B
E5-2650B v2
2.60
95
20
8
8 GT/s
1866
UCS-CPU-E52640B
E5-2640B v2
2.00
95
20
8
7.2 GT/s
1600
UCS-CPU-E52637B
E5-2637B v2
3.50
130
15
4
8 GT/s
1866
UCS-CPU-E52630B
E5-2630B v2
2.60
80
15
6
7.2 GT/s
1600
UCS-CPU-E52620B
E5-2620B v2
2.10
80
15
6
7.2 GT/s
1600
UCS-CPU-E52643B
E5-2643B v2
3.50
130
25
6
8 GT/s
1866
UCS-CPU-E52650LB
E5-2650LB v2
1.70
70
25
10
8 GT/s
1600
UCS-CPU-E52630LB
E5-2630LB v2
2.40
60
15
6
7.2 GT/s
1600
UCS-CPU-E52609B
E5-2609B v2
2.50
80
10
4
6.4 GT/s
1333
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
13
CONFIGURING the SERVER
Table 3 Available Intel CPUs: E5-2600 and E5-2600 v2 Series Processor Family CPUs (continued)
Intel
Number
Clock
Freq
(GHz)
Power
(W)
Cache
Size
(MB)
Cores
QPI
Highest DDR3
DIMM Clock
Support
(MHz)1
UCS-CPU-E5-2690
E5-2690
2.90
135
20
8
8 GT/s
1600
UCS-CPU-E5-2680
E5-2680
2.70
130
20
8
8 GT/s
1600
UCS-CPU-E5-2670
E5-2670
2.60
115
20
8
8 GT/s
1600
UCS-CPU-E5-2667
E5-2667
2.90
130
15
6
8 GT/s
1600
UCS-CPU-E5-2665
E5-2665
2.40
115
20
8
8 GT/s
1600
UCS-CPU-E5-2660
E5-2660
2.20
95
20
8
8 GT/s
1600
UCS-CPU-E5-2650
E5-2650
2.00
95
20
8
8 GT/s
1600
UCS-CPU-E5-2650L
E5-2650L
1.80
70
20
8
8 GT/s
1600
UCS-CPU-E5-2643
E5-2643
3.30
130
10
4
8 GT/s
1600
UCS-CPU-E5-2640
E5-2640
2.50
95
15
6
7.2 GT/s
1333
UCS-CPU-E5-2630
E5-2630
2.30
95
15
6
7.2 GT/s
1333
UCS-CPU-E5-2630L
E5-2630L
2.00
60
15
6
7.2 GT/s
1333
UCS-CPU-E5-2620
E5-2620
2.00
95
15
6
7.2 GT/s
1333
UCS-CPU-E5-2609
E5-2609
2.40
80
10
4
6.4 GT/s
1066
Product ID (PID)
Intel Xeon E5-26002
Notes . . .
1. If higher or lower speed DIMMs are selected than what is shown in the table for a given CPU, the DIMMs will be
clocked at the lowest common denominator of CPU clock and DIMM clock.
2. 1866-MHz DIMMs cannot be used with Sandy Bridge CPUs
14
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
CONFIGURING the SERVER
Approved Configurations
(1) 1-CPU configurations:
■
Select any one CPU listed in Table 3.
(2) 2-CPU Configurations:
■
Select two identical CPUs from any one of the rows of Table 3 on page 13.
Caveats
■
You can select either one processor or two identical processors.
■
For optimal performance, select DIMMs with the highest clock speed for a given processor
(see Table 3 on page 13). If you select DIMMs whose speeds are lower or higher than that
shown in the tables, suboptimal performance will result.
■
For configurations that use 130 W or 135 W CPUs, the minimum power supply required is
650 W (UCSC-PSU-650W). See STEP 8 ORDER POWER SUPPLY, page 38.
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
15
CONFIGURING the SERVER
STEP 3
SELECT MEMORY
The standard memory features are:
■
■
Figure 4
16
DIMMs
—
Clock speed: 1866, 1600, or 1333 MHz
—
Ranks per DIMM: 1, 2, or 4
—
Operational voltage: 1.5 V or 1.35 V
—
Registered or unbuffered ECC DDR3 DIMMs (RDIMMs or UDIMMs) or load-reduced
DIMMs (LRDIMMs)
Memory is organized with four memory channels per CPU, with up to two DIMMs per channel,
as shown in Figure 4.
C220 M3 LFF Memory Organization
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
CONFIGURING the SERVER
Select DIMMs and Memory Mirroring
Select the memory configuration and whether or not you want the memory mirroring option.
The available memory DIMMs and mirroring option are listed in Table 4.
NOTE: When memory mirroring is enabled, the memory subsystem simultaneously
writes identical data to two channels. If a memory read from one of the channels
returns incorrect data due to an uncorrectable memory error, the system
automatically retrieves the data from the other channel. A transient or soft error in
one channel does not affect the mirrored data, and operation continues unless there
is a simultaneous error in exactly the same location on a DIMM and its mirrored
DIMM. Memory mirroring reduces the amount of memory available to the operating
system by 50% because only one of the two populated channels provides data.
Table 4 Available DDR3 DIMMs
PID Description
Voltage
Ranks
/DIMM
UCS-ML-1X324RY-A
32 GB DDR3-1600-MHz LR DIMM/PC3-12800/4R/x4/1.35v
1.5/1.35 V2
4
UCS-ML-1X324RZ-A
32 GB DDR3-1866-MHz LR DIMM/PC3-14900/4R/4x/1.5v
1.5 V
4
UCS-MR-1X162RY-A
16 GB DDR3-1600-MHz RDIMM/PC3-12800/2R/x4/1.35v
1.5/1.35 V2
2
UCS-MR-1X162RZ-A
16 GB DDR3-1866-MHz RDIMM PC3-14900/2R/x4/
1.5 V
2
UCS-MR-1X082RY-A
8 GB DDR3-1600-MHz RDIMM/PC3-12800/2R/x4/1.35v
1.5/1.35 V2
2
UCS-MR-1X082RX-A3
8 GB DDR3-1333-MHz RDIMM/PC3-10600/2R/x4/1.35v
1.5/1.35 V2
2
UCS-MR-1X082RZ-A
8 GB DDR3-1866-MHz RDIMM/PC3-14900/2R/x4/
1.5 V
2
UCS-MR-1X041RY-A
4 GB DDR3-1600-MHz RDIMM/PC3-12800/1R/x4/1.35v
1.5/1.35 V2
1
UCS-MR-1X041RX-A3
4 GB DDR3-1333-MHz RDIMM/PC3-10600/1R/x4/1.35v
1.35 V
1
UCS-MU-1X042RE-A3
4 GB DDR3-1600-MHz ECC UDIMM/PC3-12800/2R/x8/1.35v
1.35 V
2
Product ID (PID)
DIMM Options1
Memory Mirroring Option
N01-MMIRROR
Memory mirroring option
Notes . . .
1. 1866-MHz DIMMs cannot be used with Intel Xeon E5-2600 CPUs
2. Dual voltage DIMM (operates at 1.5 V with BIOS is set for memory performance mode (default), or 1.35 V when
BIOS is set for power-savings mode).
3. No longer shipping as of November, 2013
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
17
CONFIGURING the SERVER
Approved Configurations
(1) 1-CPU configuration without memory mirroring:
■
Select from 1 to 8 DIMMs. Refer to Memory Population Rules, page 60, for more detailed
information.
(2) 1-CPU configuration with memory mirroring:
■
Select 2, 4, 6, or 8 identical DIMMs. The DIMMs will be placed by the factory as shown in the
following table.
Total
Number
of
DIMMs
CPU 1 DIMM Placement in Channels
(for identical DIMMs)
Blue Slots
Black Slots
2
(A1, B1)
—
4
(A1,B1); (C1,D1)
—
61
(A1,B1, C1)
(A2, B2, C2)
8
(A1,B1); (C1,D1)
(A2,B2); (C2,D2)
Notes . . .
1. Not recommended (for performance reasons)
■
Select the memory mirroring option (N01-MMIRROR) as shown in Table 4 on page 17.
(3) 2-CPU configuration without memory mirroring:
■
18
Select from 1 to 8 DIMMs per CPU. Refer to Memory Population Rules, page 60, for more
detailed information.
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
CONFIGURING the SERVER
(4) 2-CPU configuration with memory mirroring:
■
Select 2, 4, 6, or 8 identical DIMMs per CPU. The DIMMs will be placed by the factory as
shown in the following table. Notice that DIMM placement is different for single-rank and
dual-rank DIMMs.
Number
of
DIMMs
per CPU
CPU 1 DIMM Placement in Channels
(for identical dual-rank DIMMs)
CPU 2 DIMM Placement in Channels
(for identical dual-rank DIMMs)
Blue Slots
Black Slots
Blue Slots
Black Slots
2
(A1, B1)
—
(E1, F1)
—
4
(A1,B1); (C1,D1)
—
(E1,F1); (G1,H1)
—
61
(A1,B1, C1);
(A2, B2, C2)
(E1,F1, G1);
(E2, F2, G2)
8
(A1,B1); (C1,D1)
(A2,B2); (C2,D2)
(E1,F1); (G1,H1)
(E2,F2); (G2,H2)
Notes . . .
1. Not recommended (for performance reasons)
■
Select the memory mirroring option (N01-MMIRROR) as shown in Table 4 on page 17.
NOTE: System performance is optimized when the DIMM type and quantity are equal
for both CPUs, and when all channels are filled equally across the CPUs in the server.
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
19
CONFIGURING the SERVER
Caveats
■
System speed is dependent on how many DIMMs are populated per channel. See Table 5 for
details.
Table 5 DIMM Memory Speeds
1333-MHz Capable CPU
DIMM
Speed
1600-MHz Capable CPU
1866-MHz Capable CPU
LRDIMM
RDIMM
(DR, SR)
LRDIMM
RDIMM
(DR, SR)
LRDIMM
RDIMM
(DR, SR)
Voltage
Voltage
Voltage
Voltage
Voltage
Voltage
DPC
1.3 V
1.5 V
1.3 V
1.5 V
1.3 V
1.5 V
1.3 V
1.5 V
1.3 V
1.5 V
1.3 V
1.5 V
1333
DIMM
1DPC
1333
1333
1333
1333
1333
1333
1333
1333
1333
1333
1333
1333
2DPC
1333
1333
1333
1333
1333
1333
1333
1333
1333
1333
1333
1333
1600
DIMM
1DPC
1333
1333
1333
1333
16001
16001
1333
1600
16002
16001
1333
1600
2DPC
1333
1333
1333
1333
16001
16001
1333
1600
16002
16001
1333
1600
1DPC
NA3
1333
NA3
1333
NA3
1600
NA3
1600
NA3
1866
NA3
1866
2DPC
NA3
1333
NA3
1333
NA3
1600
NA3
1600
NA3
1866
NA3
1866
1866
DIMM2
Notes . . .
1. These DIMMs operate at 1333 MHz instead of 1600 MHz when used with any E5-2600 CPUs. They operate at
1600 MHz when used with E5-2600 v2 CPUs that support 1600- and 1866-MHz speeds.
2. 1866-MHz DIMMs are only offered and supported with E5-2600 v2 CPU-configured servers
3. NA = not applicable
20
■
For optimum performance, do not mix DIMMs with different frequencies. If you mix DIMM
frequencies, the system defaults to the lower frequency.
■
Do not mix RDIMMs, LRDIMMs, or UDIMMs
■
DIMMs for CPU 1 and CPU 2 (when populated) must always be configured identically.
■
The server supports 1 or 2 DIMMs per channel for single- or dual-rank RDIMMs.
■
The server supports 1 or 2 DIMMs per channel for quad-rank LRDIMMs.
■
When using mirroring, DIMMs must be installed in identical pairs across paired DDR3 buses.
That is, mirrored pairs in channels A and B must be identical and pairs in channels C and D
must be identical. However, the DIMMs used in channels A and B and in C and D can be
different.
■
Non-ECC DIMMs are not supported.
■
Memory mirroring reduces the amount of available memory by 50% (quantity of DIMMs must
be even for mirroring).
■
When single- and dual-rank DIMMs are populated for 2DPC, always populate the dual rank
DIMM in the blue DIMM slot, and the single-rank DIMM in the black DIMM slot (only the 4GB
DIMMs are single-rank).
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
CONFIGURING the SERVER
■
By default, starting with UCSM 2.0.4, DIMMs run in memory performance mode (1.5v) by
BIOS default, which yields faster memory speeds than when the BIOS is set for the memory
to run in power-savings mode. Memory speed is dependent on factors such as:
—
CPU choice
—
DIMM choice
—
DIMM population (how many DIMMs per channel are populated)
—
BIOS setting.
For the DIMMs to run in power-savings mode (1.35 V, if the DIMM supports this), change
the BIOS setting to power-savings mode.
For more information regarding memory, see CPUs and DIMMs, page 58.
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
21
CONFIGURING the SERVER
STEP 4
SELECT RAID CONFIGURATION
NOTE: If you do not select a mezzanine card, a PCIe RAID controller, or one of the
embedded RAID upgrade options, you will have an embedded SATA-only RAID
controller that supports up to four SATA-only drives (RAID 0, 1, 10)
NOTE: When creating a RAID volume, follow these guidelines:
■
Use the same capacity for each drive in the volume
■
Use either all SAS drives or all SATA drives
■
Use either all HDDs or all SSDs
NOTE: The number of RAID groups (virtual drives) supported per controller is as
follows:
■
Embedded RAID = 8
■
LSI MegaRAID 9271-8i or 9271CV-8i RAID controller card = 64
■
LSI MegaRAID 9285CV-8e or 9286CV-8e RAID controller card = 64
■
Cisco UCSC RAID SAS 2008M-8i Mezzanine Card = 16
The RAID controller choices are:
(1) Embedded RAID (on motherboard)
NOTE: The RAID configuration options listed in Table 8 on page 24 are not available
if you choose embedded RAID (in this case, you must configure RAID yourself using
separate software).
(2) Mezzanine RAID controller cards (not supported in 1-CPU systems)
(3) PCIe RAID controller
Cisco can provide factory-configured RAID systems depending on the RAID controller chosen and
the number of drives ordered. Factory-configured RAID options are listed with each RAID card
description.
22
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
CONFIGURING the SERVER
Select RAID Options
Select as follows (these choices are dependent on the number of CPUs installed):
■
One embedded RAID upgrade option for internal drives, or
■
One mezzanine RAID controller for internal drives, or
■
One RAID controller for external drives, or
■
One RAID controller for internal drives, or
■
One mezzanine RAID controller for internal drives and one RAID controller for external
drives
NOTE: For all valid combinations of embedded RAID, mezzanine RAID, and
internal/external RAID controller combinations, see RAID Details, page 67.
Table 6 Available Embedded RAID Options
Product ID (PID)
PID Description
RAID Controllers
UCSC-RAID-ROM1
Onboard RAID, consisting of a plug-in storage controller unit (SCU), supporting
up to 8 internal SAS +SATA drives. SAS and SATA drives can be mixed. This
option supports RAID 0, 1, and 10, and operates at 3 Gb/s. Operating systems
supported are Windows and Linux only (no VMware support).
UCSC-RAID-ROM15
Onboard RAID, consisting of two plug-in modules (an SCU plus a software key
module) supporting up to 8 internal SAS+SATA drives. SAS and SATA drives can
be mixed. This option supports RAID 0, 1, 5, and 10 and operates at 3 Gb/s.
Operating systems supported are Windows and Linux only (no VMware
support).
NOTE: VMware ESX/ESXi or any other virtualized environments are not supported
for use with the embedded MegaRAID controller. Hypervisors such as Hyper-V, Xen, or
KVM are also not supported for use with the embedded MegaRAID controller
Table 7 Available Mezzanine Card RAID Options
Product ID (PID)
PID Description
Mezzanine RAID Controllers (not supported in 1-CPU systems)
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
23
CONFIGURING the SERVER
Table 7 Available Mezzanine Card RAID Options (continued)
Product ID (PID)
PID Description
UCSC-RAID-11-C220
Cisco UCSC RAID SAS 2008M-8i Mezzanine Card (RAID 0, 1, 5, 10, and 50
supported), operating at 6 Gbs.
■
Supports up to eight internal SAS+SATA drives (limited to four drives for
the C220 M3 LFF chassis). SAS and SATA drives can be mixed.
■
Factory-configured RAID options available: RAID 0, 1, 5, and 10 (see the
RAID PIDs section in this table)
■
UCSC-RAID-MZ-220
No data cache backup
Cisco UCSC RAID SAS 2008M-8i Mezzanine Card (RAID 0, 1, 10 supported),
operating at 6 Gbs.
■
Supports up to eight internal SAS+SATA drives (limited to four drives for
the C220 M3 LFF chassis). SAS and SATA drives can be mixed.
■
Factory-configured RAID options available: RAID 0, 1, and 10 (see the RAID
PIDs section in this table)
■
No data cache backup
Table 8 Available PCIe RAID Controller Options
Product ID (PID)
PID Description
RAID Controllers1
Note that PCIe RAID controllers are installed by default in slot 1 for 1-CPU systems and slot 2 for
2-CPU systems)
UCS-RAID9271-8I or
UCS-RAID9271CV-8I
LSI MegaRAID SAS 9271-8i or 9271CV-8i RAID controller card with data cache
backup (RAID 0, 1, 10, 5, 6, 50, 60), operating at 6 Gbs.
■
Supports up to eight internal SAS+SATA drives (limited to four drives for
the C220 M3 LFF chassis). SAS and SATA drives can be mixed.
■
Includes a 1 GB Transportable Flash Module (TFM) and a chassis-mounted
(remote) supercapacitor for data cache power backup (supercapacitor not
available on the 9271-8i)
■
Factory-configured RAID options available: RAID 0, 1, 5, 6, and 10, (see
the RAID PIDs section in this table)
NOTE: For any application requiring Virtualization support (VMs), with
write cache/scalable performance, use the 9271CV-8I RAID controller
instead of the mezzanine RAID controllers (UCSC-RAID-11-C220 or
UCSC-RAID-MZ-220), as the latter controllers do not support a write
cache.
24
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
CONFIGURING the SERVER
Table 8 Available PCIe RAID Controller Options (continued)
Product ID (PID)
PID Description
UCS-RAID-9285CV-E or
UCS-RAID9286CV-8E
LSI MegaRAID SAS 9285CV-8e or 9286CV-8e (RAID 0, 1, 5, 6, 10)
■
Supports from one to eight external SAS ports (up to 240 external drives).
NOTE: For SAS 9285CV-8e or 9286CV-8e external drive enclosure
support, see the compatibility list (enclosure section) at the following
link:
http://tinyurl.com/b4etshk
Cisco is able to support customers with questions related to the SAS
9285CV-8e or 9286CV-8e RAID card; however, customers should contact
their storage vendor for technical support related to enclosure/JBOD.
■
Includes an chassis-mount (remote) supercapacitor to power on-board
1 GB flash-backed write cache.
■
Factory-configured RAID options: RAID 0, 1, 5, 6, 10 (see the RAID
Configuration section in this table). Note that factory RAID configuration is
not available for these controllers, because the factory does not control
the storage array attached to them.
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
25
CONFIGURING the SERVER
Table 8 Available PCIe RAID Controller Options (continued)
Product ID (PID)
PID Description
Super Capacitor Option
UCS-RAID-CV-SC=
LSI CacheVault Power Module. This is a spare supercapacitor. It is the exact
same supercapacitor that ships with the 9271CV-8i, 9285CV-8e, and 9286CV-8e
cards listed earlier in this table and can be used as a replacement or upgrade
part.
RAID Configuration Options (not available for embedded RAID)
R2XX-SRAID0
Enable Single Disk Raid 0 Setting (for the following PIDs only):
■
UCS-RAID9271-8i or UCS-RAID9271CV-8I
■
UCSC-RAID-11-C220
■
UCSC-RAID-MZ-220
R2XX-RAID0
Factory preconfigured RAID striping option
Enable RAID 0 Setting. Requires a minimum of one hard drive.
R2XX-RAID1
Factory preconfigured RAID mirroring option
Enable RAID 1 Setting. Requires exactly two drives with the same size, speed,
capacity.
R2XX-RAID5
Factory preconfigured RAID option
Enable RAID 5 Setting. Requires a minimum of three drives of the same size,
speed, capacity.
R2XX-RAID6
Factory preconfigured RAID option
Enable RAID 6 Setting. Requires a minimum of four drives of the same size,
speed, capacity.
R2XX-RAID10
Factory preconfigured RAID option
Enable RAID 10 Setting. Requires a even number of drives (minimum of four
drives) of the same size, speed, capacity.
Notes . . .
1. The SAS 9285CV-8e is compatible with PCI Express 2.0 x8 and the 9271-8i, 9271CV-8i, and 9286CV-8e
are compatible with PCI Express 3.0 x8.
NOTE: The 9266CV-8i and 9285CV-8e RAID controllers will reach end-of-life (EOL) in
November, 2013. After then, they will no longer be available.
NOTE: Although RAID levels 50 and 60 are not orderable from the factory, they are
supported for selected controllers as shown in Table 6
26
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
CONFIGURING the SERVER
CAUTION: If one of your RAID cards is equipped with a
battery backup unit (BBU), be aware that hot swapping the
BBU is not supported. Please perform a graceful shutdown
of the server prior to replacing the BBU.
Approved Configurations
The C220 M3 LFF server has a 4-drive backplane.
■
LSI ROM1 and LSI ROM15 embedded RAID upgrade options support up to 4 drives.
■
Mezzanine card (UCSC-RAID-11-C220) supports up to 4 drives.
■
Mezzanine card (UCSC-RAID-MZ-220) supports up to 4 drives.
■
SAS 9271-8i and 9271CV-8i PCIe cards support up to 4 drives.
■
LSI MegaRAID SAS 9285CV-8e and 9286CV-8e PCIe cards support up to 8 external SAS ports
(240 external drives).
NOTE: If you do not select a mezzanine card, a PCIe RAID controller, or one of the
embedded RAID upgrade options, you will have an embedded SATA-only RAID
controller that supports up to four SATA-only drives (RAID 0, 1, 10)
See Table 9 for a summary of the supported RAID configuration options.
Table 9 Supported RAID Configurations
Server
# Embedded
CPUs
RAID
Mezz
RAID1
Internal
PCIe RAID
#12
Internal
PCIe
RAID #23
External
# Drives
PCIe
Supported
RAID4
PCIe Slots5
1
2
C220 M3 LFF
1
Enabled
Not
allowed6
Not
allowed
Not
allowed
Not
allowed
4 internal
A
U
C220 M3 LFF
1
Not
allowed
Not
allowed
Installed
slot 1
(default)
Not
allowed
Not
allowed
4 internal
O
U
C220 M3 LFF
1
Not
allowed
Not
allowed
Not
allowed
Not
allowed
Installed
slot 1
240
external
O
U
C220 M3 LFF
2
Enabled
Not
allowed
Not
allowed
Not
allowed
Not
allowed
4 internal
A
A
C220 M3 LFF
2
Not
allowed
Installed
Not
allowed
Not
allowed
Card
absent
4 internal
A
A
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
27
CONFIGURING the SERVER
Table 9 Supported RAID Configurations (continued)
# Embedded
CPUs
RAID
Server
Mezz
RAID1
Internal
PCIe RAID
#12
Internal
PCIe
RAID #23
External
# Drives
PCIe
Supported
RAID4
PCIe Slots5
1
2
C220 M3 LFF
2
Not
allowed
Not
allowed
Installed
slot 2
(default)
Not
allowed
Not
allowed
4 internal
A
O
C220 M3 LFF
2
Not
allowed
Card
absent
Not
allowed
Not
allowed
Installed
slot 1 or
slot 2
240
external
A
A
C220 M3 LFF
2
Not
allowed
Installed
Not
allowed
Not
allowed
Installed
slot 1 or
slot 2
4 internal
240
external
A
A
Notes . . .
1. Never disable OPROM for the mezzanine slot if the mezzanine card is present, or the system will not boot. If
you remove the mezzanine card and disable its OPROM, you can boot from another bootable device (RAID card,
embedded RAID, or from SAN via an HBA or CNA card). When you boot from a device, make sure its OPROM is
enabled, it is in the proper boot sequence, and its BIOS is configured for a bootable device.
2. If you want to boot from a device other than the 9271-8i or 9271CV-8i MegaRAID PCIe card, you can leave the
card installed. Just disable the OPROM for its slot, and the system will boot even with the card installed.
3. Dual RAID controllers are not supported in this server
4. External RAID card is the 9285CV-8e or 9286CV-8e. Any of these cards can be installed simultaneously with one
mezzanine RAID controller card. It cannot be used simultaneously with an internal RAID controller card
(9271-8i or 9271CV-8i) because of mounting space limitations for the supercap (there is space to mount only
one supercap).
5. A = available slot, O = occupied slot, U = unsupported slot (slot 2 is not supported in 1-CPU systems)
6. The mezzanine slot is not supported in 1-CPU systems
Caveats
■
Note that only a single Cisco VIC card (the half-height Cisco VIC 1225 or 1285 PCIe card) is
supported and it must be installed in the full-height PCIe slot (slot 1) on riser 1. So take this
into account when populating RAID controller cards.
■
You can choose an optional RAID configuration (RAID 0, 1, 5, 6, or 10), which is
preconfigured at the factory. The RAID level you choose must be an available RAID choice for
the controller selected. RAID levels 50 and 60 are supported, although they are not available
as configuration options.
NOTE: RAID for the external RAID controllers (LSI MegaRAID SAS 9286CV-e and LSI
MegaRAID SAS 9285CV-e) is not factory configured.
NOTE: For more important information regarding RAID support, see RAID Details,
page 67 and RAID Option ROM (OPROM) Settings, page 68.
28
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
CONFIGURING the SERVER
STEP 5
SELECT HARD DISK DRIVES (HDDs)
The standard disk drive features are:
■
3.5-inch large form factor
■
Hot-pluggable
■
Sled-mounted
Select Drives
The available drives are listed in Table 10.
Table 10 Available Hot-Pluggable Sled-Mounted HDDs
PID Description
Drive
Type
Capacity
UCS-HD4T7KS3-E
4 TB SAS 7.2K RPM 3.5 inch HDD
SAS
4 TB
UCS-HDD3TI2F214
3 TB SAS 7.2K RPM 3.5 inch HDD
SAS
3 TB
UCS-HDD2TI2F213
2 TB SAS 7.2K RPM 3.5 inch HDD
SAS
2 TB
UCS-HDD1TI2F212
1 TB SAS 7.2K RPM 3.5 inch HDD
SAS
1 TB
Product ID (PID)
HDDs
NOTE: When creating a RAID volume, follow these guidelines:
■
Use the same capacity for each drive in the volume
■
Use either all SAS drives or all SATA drives
■
Use either all HDDs or all SSDs
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
29
CONFIGURING the SERVER
Approved Configurations
(1) Onboard RAID, mezzanine cards, and internal drive PCIe RAID controllers
■
If you have not selected an onboard RAID upgrade option (LSI ROM1 or LSI ROM15), a
mezzanine card, or a PCIe RAID controller for internal drives (LSI MegaRAID SAS 9271-8i or
9271CV-8i), you may select up to 4 SATA-only drives, which will be controlled with the
embedded SATA-only RAID controller.
■
Otherwise, select up to four SAS+SATA drives listed in Table 10. You can mix SAS and SATA
drives.
Caveats
■
30
You can mix SATA and SAS drives.
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
CONFIGURING the SERVER
STEP 6
SELECT PCIe OPTION CARD(s)
The standard PCie card offerings are:
■
Converged Network Adapters (CNAs)
■
Network Interface Cards (NICs)
■
Host Bus Adapters (HBAs)
■
UCS Storage Accelerators
Select PCIe Option Cards
The available PCIe option cards are listed in Table 11.
Table 11 Available PCIe Option Cards
Product ID (PID)
PID Description
Card
Height
Converged Network Adapters (CNAs)
UCSC-PCIE-CSC-02
Cisco VIC 1225 Dual Port 10Gb SFP+ CNA
Half
UCSC-PCIE-C10T-02
Cisco VIC 1225T Dual Port 10GBaseT CNA
Half
UCSC-PCIE-C40Q-02
Cisco VIC 1285 Dual Port 40 Gb QSFP CNA
Half
UCSC-PCIE-ESFP
Emulex OCe11102-FX dual-port 10 GbE FCoE CNA (Gen 3 CNA)
Half
UCSC-PCIE-B3SFP
Broadcom 57810 10Gb A-FEX SFP+
Half
UCSC-PCIE-Q8362
Qlogic QLE8362 dual-port 10 GbE FCoE CNA
Half
Network Interface Cards (NICs)
N2XX-ABPCI01-M3
Broadcom 5709 Dual Port 1Gb w/TOE iSCSI for M3 Servers
Half
N2XX-ABPCI03-M3
Broadcom 5709 Quad Port 1Gb w/TOE iSCSI for M3 Servers
Half
N2XX-AIPCI01
Intel X520 Dual Port 10Gb SFP+ Adapter
Half
UCSC-PCIE-ITG
Intel X540 Dual Port 10GBase-T Adapter
Half
UCSC-PCIE-IRJ45
Intel i350 Quad Port 1Gb Adapter
Half
UCSC-PCIE-BTG
Broadcom 57712 Dual Port 10GBASE-T w/TOE iSCSI
Half
Host Bus Adapters (HBAs)
N2XX-AEPCI03
Emulex LPe 11002 Dual Port 4Gb Fibre Channel HBA
Half
N2XX-AEPCI05
Emulex LPe 12002 Dual Port 8Gb Fibre Channel HBA
Half
N2XX-AQPCI03
Qlogic QLE2462 Dual Port 4Gb Fibre Channel HBA
Half
N2XX-AQPCI05
Qlogic QLE2562 Dual Port 8Gb Fibre Channel HBA
Half
UCSC-PCIE-Q2672
Qlogic QLE2672-CSC, 16Gb Fibre Channel HBA with SR Optics
Half
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
31
CONFIGURING the SERVER
Table 11 Available PCIe Option Cards (continued)
Product ID (PID)
PID Description
Card
Height
UCSC-PCIE-E16002
Emulex LPe16002-M6, 16Gb Fibre Channel HBA with SR Optics
Half
UCS Storage Accelerators
UCSC-F-FIO-3000M
Cisco UCS 3.0 TB MLC Fusion ioDrive2 for C-Series Servers
Full
UCSC-F-FIO-1205M
Cisco UCS 1205 GB MLC Fusion ioDrive2 for C-Series Servers
Half
UCSC-F-FIO-785M
Cisco UCS 785 GB MLC Fusion ioDrive2 for C-Series Servers
Half
UCSC-F-FIO-365M
Cisco UCS 365GB MLC Fusion ioDrive2 for C-Series Servers
Half
Approved Configurations
(1) No PCIe RAID controller
■
If you did not choose a PCIe RAID controller (for example, you are using embedded RAID or a
mezzanine RAID controller), you can select up to one PCie option card (for 1-CPU systems)
or two PCie option cards (for 2-CPU systems) listed in Table 11 on page 31.
(2) One PCIe RAID controller
■
If you selected a PCIe RAID controller, you can select none of the optional PCIe cards (for
1-CPU systems) or one of the optional PCIe cards (for 2-CPU systems) listed in Table 11 on
page 31.
NOTE: If a PCIe RAID controller card is installed, any optional PCIe card you select
will be installed in the full-height slot. RAID controllers are always installed in the
half-height slot.
Caveats
■
■
For 1-CPU systems:
—
Only the full-height PCIe slot (slot 1) is supported
—
Neither PCIe slot 2 nor the mezzanine card slot are supported
—
Only a single VIC card (the Cisco VIC 1225 or 1285 PCIe card) is supported and it
must be installed in slot 1 (the full-height slot).
—
If any of the Fusion ioDrive2 cards are installed, they must be plugged into slot 1.
Note that the only the Cisco UCS 3.0 TB MLC Fusion ioDrive2 card is full-height; all
other Fusion ioDrive2 cards are half-height and therefore may need an adapter to
hold them securely in the full-height slot.
For 2-CPU systems:
—
32
Both PCIe slots (slots 1 and 2) and the mezzanine card slot are supported
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
CONFIGURING the SERVER
■
■
—
Only a single VIC card (the half-height Cisco VIC 1225 or 1285 PCIe card) is supported
and it must be installed in slot 1 (the full height slot).
—
Only a single Cisco UCS 3.0 TB MLC Fusion ioDrive2 card is supported and it must be
installed in slot 1 (the full height slot).
—
Up to two of the other Fusion ioDrive2 cards (1205-, 785- and 365-GB versions) are
supported and can be installed in either slot 1 or 2, although an adapter may be
needed when installing one of these half-height cards in slot 1 (the full-height slot).
Other considerations for the Cisco VIC 1225 or 1285:
—
Supports 10G SFP+ optical and copper twinax connections
—
The server supports installation of one Cisco VIC card and it is supported only in PCIe
slot 1.
—
Requires that the server has CIMC firmware version 1.4(6) or later installed. There is
a heartbeat LED on the top of the card that indicates when firmware is active.
—
To use this card for UCS integration (Cisco UCS Manager mode) with Cisco UCS
Manager 2.1(0) or later, the minimum card-firmware and uboot image level is
2.1(0.306).
To help ensure that your operating system is compatible with the card you have selected,
check the Hardware Compatibility List at this URL:
http://www.cisco.com/en/US/products/ps10477/prod_technical_reference_list.html
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
33
CONFIGURING the SERVER
STEP 7
ORDER OPTIONAL NETWORK CARD ACCESSORIES
Copper twinax cables and SFP optical modules may be ordered to support the two-port network cards that
are available with the server.
Choose Optional Twinax Cables
Table 12 lists the copper twinax cables available for the PCIe cards. You can choose cable
lengths of 1, 3, 5, 7, or 10 meters. The two longer cables (7 and 10 meters) are active, which
means that they contain active components within the SFP+ housing to improve signal quality.
Table 12 Available Twinax Cables
Product ID (PID)
PID Description
SFP-H10GB-CU1M
10GBASE-CU SFP+ Cable (1 M)
SFP-H10GB-CU3M
10GBASE-CU SFP+ Cable (3 M)
SFP-H10GB-CU5M
10GBASE-CU SFP+ Cable (5 M)
SFP-H10GB-ACU7M
10GBASE-CU SFP+ Cable (7 M)
SFP-H10GB-ACU10M
10GBASE-CU SFP+ Cable (10 M)
Approved Configurations
(1) Choose Up to Two Twinax Cables for Each Network Card Ordered
■
You may choose one or two twinax cables for each compatible PCIe network card ordered.
The cables can be different lengths; however, you would normally order two cables of equal
lengths to connect to the primary and redundant network switching equipment.
Choose Optional SFP Modules
Optical Cisco SFP+ modules are listed in Table 13.
Table 13 Available SFP Modules
Product ID (PID)
PID Description
SFP-10G-SR
10GBASE-SR SFP+ Module
850 nm, multimode, SR, 3.3V, LC connector, with Digital Optical Monitoring
DS-SFP-FC8G-SW
8 Gbit SFP+ Module
850 nm, multimode, SR, 3.3V, LC connector, with Digital Optical Monitoring
34
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
CONFIGURING the SERVER
Approved Configurations
(1) Choose Up to Two SFP+ Modules for Each Network Card Ordered
■
You may choose one or two SFP+ optical modules cables for each compatible PCIe network
card ordered. You would normally order two modules for connecting to the primary and
redundant network switching equipment. With the SFP+ optical modules, you can use
common fiber optic cables, widely available.
See the Figure 5 on page 37 for typical SFP+ and twinax connections to the network cards.
Caveats
Check the table on the following page for compatibility between the PCIe network cards and
SFPs or twinax cables.
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
35
CONFIGURING the SERVER
Table 14 PCIe Card Compatibility
Cisco SFP Modules
Twinax
Cables SFP-10G-SR DS-SFP-FC8G-SW
PCIe Cards
Converged Network Adapters (CNAs)
UCSC-PCIE-BSFP
(Broadcom 57712 Dual Port 10Gb SFP+ w/TOE iSCSI)
UCSC-PCIE-CSC-02
(Cisco VIC 1225 Dual Port 10Gb SFP+ CNA)
UCSC-PCIE-C10T-02
(Cisco VIC 1225T Dual Port 10GBaseT CNA)
UCSC-PCIE-C40Q-02
(Cisco VIC 1285 Dual Port 40Gb QSFP CNA)
UCSC-PCIE-C40Q-03
(Cisco VIC 1385 Dual Port 40Gb QSFP+ CNA w/RDMA)
UCSC-PCIE-ESFP
(Emulex OCe11102-FX dual-port 10 GbE FCoE CNA (Gen 3 CNA))
UCSC-PCIE-QSFP
(QLogic QLE8242-CU dual-port 10 GbE FCoE CNA)
UCSC-PCIE-B3SFP
(Broadcom 57810 10Gb A-FEX SFP+
UCSC-PCIE-Q8362
(Qlogic QLE8362 dual-port 10 GbE FCoE CNA)
UCSC-PCIE-E14102
(Emulex OCe14102-UX dual-port 10 GbE FCoE CNA)
Network Interface Cards (NICs)
N2XX-ABPCI01-M3
(Broadcom 5709 Dual-Port Ethernet PCIe Adapter for M3
Servers)
N2XX-ABPCI03-M3
(Broadcom 5709 Quad Port 10/100/1Gb NIC w/TOE iSCSI for M3
Servers
N2XX-AIPCI01
(Intel X520 Dual Port 10Gb SFP+ Adapter)
UCSC-PCIE-ITG
(Intel X540 Dual Port 10GBase-T Adapter)
UCSC-PCIE-IRJ45
(Intel i350 Quad Port 1Gb Adapter
UCSC-PCIE-BTG
(Broadcom 57712 Dual Port 10GBASE-T w/TOE iSCSI)
Host Bus Adapters (HBAs)
N2XX-AEPCI03
(Emulex LPe 11002 Dual Port 4Gb Fibre Channel HBA
N2XX-AEPCI05
(Emulex LPe 12002 Dual Port 8Gb Fibre Channel HBA)
N2XX-AQPCI03
(QLogic QLE2462 Dual Port 4Gb Fibre Channel HBA)
36
Yes
Yes
No
Yes
Yes
No
No
No
No
Yes
No1
No
Yes
No1
No
Yes
Yes
No
Yes
Yes
Use Qlogic SFP
Yes
Yes
No
Use Qlogic SFP
Yes
Yes
No
Yes
No
No
Use RJ45 Ethernet cable
Yes
Yes
Use Intel SFP
No
No
Use RJ45 Ethernet cable
Yes
No
No
No
Preinstalled - do not change SFP
No
Preinstalled - do not change SFP
No
Preinstalled - do not change SFP
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
CONFIGURING the SERVER
Table 14 PCIe Card Compatibility (continued)
Cisco SFP Modules
Twinax
Cables SFP-10G-SR DS-SFP-FC8G-SW
PCIe Cards
N2XX-AQPCI05
(QLogic QLE2562 Dual Port 8Gb Fibre Channel HBA)
UCSC-PCIE-Q2672
(Qlogic QLE2672-CSC, 16Gb Fibre Channel HBA with SR Optics)
UCSC-PCIE-E16002
(Emulex LPe16002-M6, 16Gb Fibre Channel HBA with SR Optics)
No
Preinstalled - do not change SFP
No
Preinstalled - do not change SFP
No
Preinstalled - do not change SFP
Notes . . .
1. This card supports a 4x10 Gbps QSFP to SFP breakout fiber cable.
Figure 5
Network Card Connections
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
37
CONFIGURING the SERVER
STEP 8
ORDER POWER SUPPLY
The C220 M3 LFF server accommodates two power supplies. A lightly loaded server can operate
from one 650 W power supply. A fully loaded server might need to be powered with two 450 W or
two 650 W power supplies (see Table 15).
NOTE: For configurations that use 130 W or 135 W CPUs, the minimum power supply
required is 650 W (UCSC-PSU-650W). See STEP 2 SELECT CPU(s), page 13.
Use the power calculator at the following link to determine the needed power based on the
options chosen (CPUs, drives, memory, and so on):
https://express.salire.com/Go/Cisco/Cisco-UCS-Power-Calculator.aspx
Table 15
Power Supply PIDs
Product ID (PID)
PID Description
UCSC-PSU-450W
450 W power supply
UCSC-PSU-650W
650 W power supply
UCSC-PSU-930WDC
930 W -48V DC power supply
NOTE: In a two power supply server, both power supplies must be identical.
38
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
CONFIGURING the SERVER
STEP 9
SELECT AC POWER CORD(s)
Using Table 16, select the appropriate AC power cords. You can select a minimum of no power
cords and a maximum of two. If you select the option R2XX-DMYMPWRCORD, no power cord is
shipped with the server.
Table 16 Available Power Cords
Product ID (PID)
PID Description
Images
R2XX-DMYMPWRCORD
No power cord (dummy PID to
allow for a no power cord option)
Not applicable
CAB-N5K6A-NA
Power Cord, 200/240V 6A, North
America
Cordset rating: 10 A, 250 V
Length: 8.2 ft
Connector:
IEC60320/C13
CAB-AC-L620-C13
AC Power Cord, NEMA L6-20 - C13,
2M/6.5ft
CAB-C13-CBN
CABASY,WIRE,JUMPER CORD, 27" L,
C13/C14, 10A/250V
CAB-C13-C14-2M
CABASY,WIRE,JUMPER CORD, PWR,
2 Meter, C13/C14,10A/250V
CAB-C13-C14-AC
CORD,PWR,JMP,IEC60320/C14,IEC6
0320/C13, 3.0M
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
186570
Plug: NEMA 6-15P
39
CONFIGURING the SERVER
Table 16 Available Power Cords
Product ID (PID)
PID Description
SFS-250V-10A-AR
Power Cord, SFS, 250V, 10A,
Argentina
Images
2500 mm
Cordset rating: 10 A, 250/500 V MAX
Length: 8.2 ft
Plug:
EL 219
(IRAM 2073)
CAB-9K10A-AU
186571
Connector:
EL 701
(IEC60320/C13)
Power Cord, 250VAC 10A 3112 Plug,
Australia
Connector:
EL 701C
(EN 60320/C15)
Plug:
EL 210
(BS 1363A) 13 AMP fuse
Power Cord, SFS, 250V, 10A, China
Cordset rating 10A, 250V
(2500 mm)
Connector:
EL 701
(IEC60320/C13)
CAB-250V-10A-CN
AC Power Cord - 250V, 10A - PRC
CAB-9K10A-EU
Power Cord, 250VAC 10A CEE 7/7
Plug, EU
Plug:
M2511
Cordset rating: 10A/16 A, 250 V
Length: 8 ft 2 in. (2.5 m)
Connector:
VSCC15
SFS-250V-10A-ID
186573
Plug:
EL 218
(CCEE GB2009)
186576
SFS-250V-10A-CN
186580
Cordset rating: 10 A, 250 V/500 V MAX
Length: 2500mm
Power Cord, SFS, 250V, 10A, India
OVE
Plug:
EL 208
Cordset rating 16A, 250V
(2500mm)
187490
Connector:
EL 701
SFS-250V-10A-IS
Power Cord, SFS, 250V, 10A, Israel
EL-212
16A
250V
Cordset rating 10A, 250V/500V MAX
(2500 mm)
40
Connector:
EL 701B
(IEC60320/C13)
186574
Plug:
EL 212
(SI-32)
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
CONFIGURING the SERVER
Table 16 Available Power Cords
Product ID (PID)
PID Description
CAB-9K10A-IT
Power Cord, 250VAC 10A CEI
23-16/VII Plug, Italy
Images
Cordset rating: 10 A, 250 V
Length: 8 ft 2 in. (2.5 m)
Connector
C15M
(EN60320/C15 )
186575
Plug:
I/3G
(CEI 23-16)
CAB-9K10A-SW
Power Cord, 250VAC 10A MP232
Plug, Switzerland
Cordset rating: 10 A, 250 V
Length: 8 ft. 2 in (2.5 m)
Connector:
IEC 60320 C15
186578
Plug:
MP232-R
CAB-9K10A-UK
Power Cord, 250VAC 10A BS1363
Plug (13 A fuse), UK
Connector:
EL 701C
(EN 60320/C15)
Plug:
EL 210
(BS 1363A) 13 AMP fuse
CAB-9K12A-NA
Power Cord, 125VAC 13A NEMA
5-15 Plug, North America
CAB-250V-10A-BR
Power Cord - 250V, 10A - Brazil
1
186580
Cordset rating: 10 A, 250 V/500 V MAX
Length: 2500mm
76.2 From Plug End
2,133.6 ± 25
CAB-JPN-3PIN
Power Cord 3PIN, Japan
Image not available
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
41
CONFIGURING the SERVER
STEP 10 ORDER OPTIONAL REVERSIBLE CABLE MANAGEMENT ARM
The reversible cable management arm mounts on either the right or left slide rails at the rear of
the server and is used for cable management. Use Table 17 to order a cable management arm.
Table 17
Cable Management Arm
Product ID (PID)
PID Description
UCSC-CMA1
Cable Management Arm for C220 rack servers
For more information about the cable management arm, see the Cisco UCS C220 M3 Installation
and Service Guide at this URL:
http://www.cisco.com/en/US/docs/unified_computing/ucs/c/hw/C220/install/C220.pdf
NOTE: All UCS C220 M3 servers ship with a tool-less rail kit.
42
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
CONFIGURING the SERVER
STEP 11 ORDER A TRUSTED PLATFORM MODULE (OPTIONAL)
Trusted Platform Module (TPM) is a computer chip (microcontroller) that can securely store
artifacts used to authenticate the platform (server). These artifacts can include passwords,
certificates, or encryption keys. A TPM can also be used to store platform measurements that
help ensure that the platform remains trustworthy. Authentication (ensuring that the platform
can prove that it is what it claims to be) and attestation (a process helping to prove that a
platform is trustworthy and has not been breached) are necessary steps to ensure safer
computing in all environments.
The TPM ordering information is listed in Table 18.
Table 18
Trusted Platform Module
Product ID (PID)
PID Description
UCSX-TPM1-001
Trusted Platform Module
NOTE: The module used in this server conforms to TPM v1.2/1.3, as defined by the
Trusted Computing Group (TCG).
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
43
CONFIGURING the SERVER
STEP 12 ORDER CISCO FLEXIBLE FLASH SD CARD MODULE (OPTIONAL)
You can order two 16 GB SD cards or one 32 GB SD card. See Figure 6 on page 57 for the
location of the SD cards. There are two locations, SD1 and SD2.
Table 19
16 GB Secure Digital (SD) Card (blank)
Product ID (PID)
PID Description
UCS-SD-16G
16GB SD Card (optional)
Table 20
32 GB Secure Digital (SD) Card
Product ID (PID)
PID Description
UCS-SD-32G-S
32GB SD Card for UCS servers
Caveats
■
44
If you install a 32 GB SD card, you cannot install a 16 GB SD card.
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
CONFIGURING the SERVER
STEP 13 ORDER USB 2.0 DRIVE (OPTIONAL)
You can order one optional USB 2.0 drive. The USB drive ordering information is listed in
Table 21.
Table 21
USB 2.0 Drive
Product ID (PID)
PID Description
UCS-USBFLSH-S-4GB
4GB Flash USB Drive (shorter length) for all servers except C260
See Figure 6 on page 57 for the location of the USB connector.
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
45
CONFIGURING the SERVER
STEP 14 SELECT OPERATING SYSTEM AND VALUE-ADDED SOFTWARE
Several operating systems and value-added software programs are available. Select as desired
from Table 22.
Table 22 OSs and Value-Added Software (for 2-CPU servers)
PID Description
Product ID (PID)
Microsoft Windows Server
MSWS-08R2-STHV
Windows Svr 2008 ST media R2 ST (1-4CPU, 5CAL)
MSWS-08R2-ENHV
Windows Svr 2008 EN media R2 EN (1-8CPU, 25CAL)
MSWS-08R2-DCHV2S
Windows Svr 2008 R2-2 CPU-Data Center
MSWS-12-ST2S
Windows Server 2012 Standard (2 CPU/2 VMs)
MSWS-12-DC2S
Windows Server 2012 Datacenter (2 CPU/Unlimited VMs)
MSWS-12-ST2S-NS
Windows Server 2012 Standard (2 CPU/2 VMs) No Cisco SVC
MSWS-12-DC2S-NS
Windows Server 2012 Datacenter (2 CPU/Unlim VM) No Cisco SVC
MSWS-12R2-ST2S
Windows Server 2012 R2 Standard (2 CPU/2 VMs)
MSWS-12R2-DC2S
Windows Server 2012 R2 Datacenter (2 CPU/Unlimited VMs)
MSWS-12R2-ST2S-NS
Windows Server 2012 R2 Standard (2 CPU/2 VMs) No Cisco SVC
MSWS-12R2-DC2S-NS
Windows Server 2012 R2 Datacen (2 CPU/Unlim VM) No Cisco Svc
SUSE
SLES-SVR-2S-1G-1A
SUSE Linux Enterprise Srvr (1-2 CPU,1 Phys);1yr Support Reqd
SLES-SVR-2S-1G-3A
SUSE Linux Enterprise Srvr (1-2 CPU,1 Phys);3yr Support Reqd
SLES-SVR-2S-1G-5A
SUSE Linux Enterprise Srvr (1-2 CPU,1 Phys);5yr Support Reqd
SLES-SVR-2S-UG-1A
SUSE Linux Enterprise Svr (1-2 CPU,Unl Vrt);1yr Support Reqd
SLES-SVR-2S-UG-3A
SUSE Linux Enterprise Svr (1-2 CPU,Unl Vrt);3yr Support Reqd
SLES-SVR-2S-UG-5A
SUSE Linux Enterprise Svr (1-2 CPU,Unl Vrt);5yr Support Reqd
SLES-SHA-2S-1A
SUSE Linux High Availability Ext (1-2 CPU); 1yr Support Reqd
SLES-SHA-2S-3A
SUSE Linux High Availability Ext (1-2 CPU); 3yr Support Reqd
SLES-SHA-2S-5A
SUSE Linux High Availability Ext (1-2 CPU); 5yr Support Reqd
SLES-HGC-2S-1A
SUSE Linux GEO Clustering for HA (1-2 CPU); 1yr Support Reqd
SLES-HGC-2S-3A
SUSE Linux GEO Clustering for HA (1-2 CPU); 3yr Support Reqd
SLES-HGC-2S-5A
SUSE Linux GEO Clustering for HA (1-2 CPU); 5yr Support Reqd
SLES-SAP-2S-1G-1A
SLES for SAP Applications (1-2 CPU,1 Phys); 1yr Support Reqd
SLES-SAP-2S-1G-3A
SLES for SAP Applications (1-2 CPU,1 Phys); 3yr Support Reqd
SLES-SAP-2S-1G-5A
SLES for SAP Applications (1-2 CPU,1 Phys); 5yr Support Reqd
SLES-SAP-2S-UG-1A
SLES for SAP Applications (1-2 CPU,Unl Vrt);1yr Support Reqd
SLES-SAP-2S-UG-3A
SLES for SAP Applications (1-2 CPU,Unl Vrt);3yr Support Reqd
SLES-SAP-2S-UG-5A
SLES for SAP Applications (1-2 CPU,Unl Vrt);5yr Support Reqd
46
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
CONFIGURING the SERVER
Table 22 OSs and Value-Added Software (for 2-CPU servers) (continued)
PID Description
Product ID (PID)
Red Hat Enterprise Linux
RHEL-2S-1G-1A
RHEL/2 Socket/1 Guest/1Yr Svcs Required
RHEL-2S-1G-3A
RHEL/2 Socket/1 Guest/3Yr Svcs Required
RHEL-2S-4G-1A
RHEL/2 Socket/4 Guest/1Yr Svcs Required
RHEL-2S-4G-3A
RHEL/2 Socket/4 Guest/3Yr Svcs Required
RHEL-2S-UG-1A
RHEL/2 Socket/U Guest/1Yr Svcs Required
RHEL-2S-UG-3A
RHEL/2 Socket/U Guest/3Yr Svcs Required
RHEL-HA-2S-1A
RHEL Option/High-Availability/2 Socket/1Yr Svcs Required RHEL-HA-2S-3A
RHEL Option/High-Availability/2 Socket/3Yr Svcs Required RHEL-RS-2S-1A
RHEL Option/Resilient w/Ha /2 Socket/1 Yr Svcs Required RHEL-RS-2S-3A
RHEL Option/Resilient Storage w/ HA /2 Socket/3 Yr Svcs Reqd RHEL-SFS-2S-1A
RHEL Option/Scalable File System/2 Socket/1 Yr Svcs Required RHEL-SFS-2S-3A
RHEL Option/Scalable File System/2 Socket/1 Yr Svcs Required
BMC
BMC-012
BMC BPPM Per Server BMC-SE-4C
BMC BladeLogic Standard Edition, 4 Cores, Support Required
BMC-SE-6C
BMC BladeLogic Standard Edition, 6 Cores, Support Required
BMC-SE-8C
BMC BladeLogic Standard Edition, 8 Cores, Support Required
BMC-SE-10C
BMC BladeLogic Standard Edition, 10 Cores, Support Required
BMC-AE-4C
BMC BladeLogic Advanced Edition, 4 Cores, Support Required
BMC-AE-6C
BMC BladeLogic Advanced Edition, 6 Cores, Support Required
BMC-AE-8C
BMC BladeLogic Advanced Edition, 8 Cores, Support Required
BMC-AE-10C
BMC BladeLogic Standard Edition, 10 Cores, Support Required
Nexus 1000V for Hyper-V and vSphere
N1K-VSG-UCS-BUN
Over half off N1K and VSG w/ purchase of UCS B/C Series
N1K-VLEM-UCS-1
Nexus 1000V License Paper Delivery (1 CPU) for bundles
VSG-VLEM-UCS-1
VSG License Paper Delivery (1 CPU) for bundles
UCS Director
CUIC-PHY-SERV-BM-U
Cisco Cloupia Resource Lic - One Phy Server node bare metal
CUIC-PHY-SERV-U
Cisco Cloupia Resource Lic - One physical Server node
CUIC-TERM
Acceptance of Cisco Cloupia License Terms
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
47
CONFIGURING the SERVER
Table 22 OSs and Value-Added Software (for 2-CPU servers) (continued)
PID Description
Product ID (PID)
VMware 5
VMW-VS5-STD-1A
VMware vSphere 5 Standard for 1 Processor, 1 Year, Support Rqd
VMW-VS5-STD-2A
VMware vSphere 5 Standard for 1 Processor, 2 Year, Support Rqd
VMW-VS5-STD-3A
VMware vSphere 5 Standard for 1 Processor, 3 Year, Support Rqd
VMW-VS5-STD-4A
VMware vSphere 5 Standard for 1 Processor, 4 Year, Support Rqd
VMW-VS5-STD-5A
VMware vSphere 5 Standard for 1 Processor, 5 Year, Support Rqd
VMW-VS5-ENT-1A
VMware vSphere 5 Enterprise for 1 Processor, 1 Year Support Rqd
VMW-VS5-ENT-2A
VMware vSphere 5 Enterprise for 1 CPU, 2 Yr Support Rqd
VMW-VS5-ENT-3A
VMware vSphere 5 Enterprise for 1 CPU, 3 Yr Support Rqd
VMW-VS5-ENT-4A
VMware vSphere 5 Enterprise for 1 Processor, 4 Year Support Rqd
VMW-VS5-ENT-5A
VMware vSphere 5 Enterprise for 1 CPU, 5 Yr Support Rqd
VMW-VS5-ENTP-1A
VMware vSphere 5 Enterprise Plus for 1 Processor, 1 Year Support Rqd
VMW-VS5-ENTP-2A
VMware vSphere 5 Enterprise Plus for 1 CPU, 2 Yr Support Rqd
VMW-VS5-ENTP-3A
VMware vSphere 5 Enterprise Plus for 1 Processor, 3 Year Support Rqd
VMW-VS5-ENTP-4A
VMware vSphere 5 Enterprise Plus for 1 Processor, 4 Year Support Rqd
VMW-VS5-ENTP-5A
VMware vSphere 5 Enterprise Plus for 1 Processor, 5 Year Support Rqd
VMW-VC5-STD-1A
VMware vCenter 5 Server Standard, 1 yr support required VMW-VC5-STD-2A
VMware vCenter 5 Server Standard, 2 yr support required VMW-VC5-STD-3A
VMware vCenter 5 Server Standard, 3 yr support required VMW-VC5-STD-4A
VMware vCenter 5 Server Standard, 4 yr support required VMW-VC5-STD-5A
VMware vCenter 5 Server Standard, 5 yr support required UCS-VMW-TERMS
Acceptance of Terms, Standalone VMW License for UCS Servers 48
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
CONFIGURING the SERVER
STEP 15 SELECT OPERATING SYSTEM MEDIA KIT
Select the optional operating system media listed in Table 23.
Table 23
OS Media
Product ID (PID)
PID Description
RHEL-6
RHEL 6 Recovery Media Only (Multilingual)
SLES-11
SLES 11 media only (multilingual)
MSWS-08R2-STHV-RM
Windows Svr 2008 R2 ST (1-4CPU, 5CAL), Media
MSWS-08R2-ENHV-RM
Windows Svr 2008 R2 EN (1-8CPU, 25CAL), Media
MSWS-08R2-DCHV-RM
Windows Svr 2008 R2 DC (1-8CPU, 25CAL), Media
MSWS-12-ST2S-RM
Windows Server 2012 Standard (2 CPU/2 VMs) Recovery Media
MSWS-12-DC2S-RM
Windows Server 2012 Datacenter(2 CPU/Unlimited VM) Rec Media
MSWS-12R2-ST2S-RM
Windows Server 2012 R2 Standard (2 CPU/2 VMs) Recovery Media
MSWS-12R2-DC2S-RM
Windows Server 2012 R2 Datacen(2 CPU/Unlimited VM) Rec Media
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
49
CONFIGURING the SERVER
STEP 16 SELECT SERVICE and SUPPORT LEVEL
A variety of service options are available, as described in this section.
Unified Computing Warranty, No Contract
If you have noncritical implementations and choose to have no service contract, the following
coverage is supplied:
■
Three-year parts coverage.
■
Next business day (NBD) onsite parts replacement eight hours a day, five days a week.
■
90-day software warranty on media.
■
Ongoing downloads of BIOS, drivers, and firmware updates.
■
UCSM updates for systems with Unified Computing System Manager. These updates include
minor enhancements and bug fixes that are designed to maintain the compliance of UCSM
with published specifications, release notes, and industry standards.
SMARTnet for UCS
For support of the entire Unified Computing System, Cisco offers the Cisco SMARTnet for UCS
Service. This service provides expert software and hardware support to help sustain
performance and high availability of the unified computing environment. Access to Cisco
Technical Assistance Center (TAC) is provided around the clock, from anywhere in the world.
For UCS blade servers, there is Smart Call Home, which provides proactive, embedded
diagnostics and real-time alerts. For systems that include Unified Computing System Manager,
the support service includes downloads of UCSM upgrades. The Cisco SMARTnet for UCS Service
includes flexible hardware replacement options, including replacement in as little as two hours.
There is also access to Cisco's extensive online technical resources to help maintain optimal
efficiency and uptime of the unified computing environment. You can choose a desired service
listed in Table 24.
Table 24
50
Cisco SMARTnet for UCS Service
Product ID (PID)
On Site?
Description
CON-PREM-C220M3LF
Yes
ONSITE 24X7X2 UCS C220 M3 Server - LFF
CON-OSP-C220M3LF
Yes
ONSITE 24X7X4 UCS C220 M3 Server - LFF
CON-OSE-C220M3LF
Yes
ONSITE 8X5X4 UCS C220 M3 Server - LFF
CON-OS-C220M3LF
Yes
ONSITE 8X5XNBD UCS C220 M3 Server - LFF
CON-S2P-C220M3LF
No
SMARTNET 24X7X2 UCS C220 M3 Server - LFF
CON-SNTP-C220M3LF
No
SMARTNET 24X7X4 UCS C220 M3 Server - LFF
CON-SNTE-C220M3LF
No
SMARTNET 8X5X4 UCS C220 M3 Server - LFF
CON-SNT-C220M3LF
No
SMARTNET 8X5XNBD UCS C220 M3 Server - LFF
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
CONFIGURING the SERVER
SMARTnet for UCS Hardware Only Service
For faster parts replacement than is provided with the standard Cisco Unified Computing System
warranty, Cisco offers the Cisco SMARTnet for UCS Hardware Only Service. You can choose from
two levels of advanced onsite parts replacement coverage in as little as four hours. SMARTnet
for UCS Hardware Only Service provides remote access any time to Cisco support professionals
who can determine if a return materials authorization (RMA) is required. You can choose a
service listed in Table 25.
Table 25
SMARTnet for UCS Hardware Only Service
Product ID (PID)
Service
Level
GSP
On
Site?
Description
CON-UCW7-C220M3LF
UCW7
Yes
UC PLUS 24X7X4OS UCS C220 M3 Server - LFF
CON-UCW5-C220M3LF
UCW5
Yes
UC PLUS 8X5XNBDOS UCS C220 M3 Server - LFF
Unified Computing Partner Support Service
Cisco Partner Support Service (PSS) is a Cisco Collaborative Services service offering that is
designed for partners to deliver their own branded support and managed services to enterprise
customers. Cisco PSS provides partners with access to Cisco's support infrastructure and assets
to help them:
■
Expand their service portfolios to support the most complex network environments
■
Lower delivery costs
■
Deliver services that increase customer loyalty
Partner Unified Computing Support Options enable eligible Cisco partners to develop and
consistently deliver high-value technical support that capitalizes on Cisco intellectual assets.
This helps partners to realize higher margins and expand their practice.
PSS is available to all Cisco PSS partners, but requires additional specializations and
requirements. For additional information, see the following URL:
www.cisco.com/go/partnerucssupport
The two Partner Unified Computing Support Options include:
■
Partner Support Service for UCS
■
Partner Support Service for UCS Hardware Only
Partner Support Service for UCS provides hardware and software support, including triage
support for third party software, backed by Cisco technical resources and level three support.
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
51
CONFIGURING the SERVER
See Table 26.
Table 26
Partner Support Service for UCS
Product ID (PID)
Service
Level
GSP
On
Site?
Description
CON-PSJ1-C220M3LF
PSJ1
No
UCS SUPP PSS 8X5XNBD UCS C220 M3 Server - LFF
CON-PSJ2-C220M3LF
PSJ2
No
UCS SUPP PSS 8X5X4 UCS C220 M3 Server - LFF
CON-PSJ3-C220M3LF
PSJ3
No
UCS SUPP PSS 24X7X4 UCS C220 M3 Server - LFF
CON-PSJ4-C220M3LF
PSJ4
No
UCS SUPP PSS 24X7X2 UCS C220 M3 Server - LFF
Partner Support Service for UCS Hardware Only provides customers with replacement parts in as
little as two hours. See Table 27.
Table 27
Partner Support Service for UCS (Hardware Only)
Product ID (PID)
Service
Level
GSP
On
Site?
Description
CON-PSW2-C220M3LF
PSW2
No
UCS W PL PSS 8X5X4 UCS C220 M3 Server - LFF
CON-PSW3-C220M3LF
PSW3
No
UCS W PL PSS 24X7X4 UCS C220 M3 Server - LFF
CON-PSW4-C220M3LF
PSW4
No
UCS W PL PSS 24X7X2 UCS C220 M3 Server - LFF
Unified Computing Combined Support Service
Combined Services makes it easier to purchase and manage required services under one
contract. SMARTnet services for UCS help increase the availability of your vital data center
infrastructure and realize the most value from your unified computing investment. The more
benefits you realize from the Cisco Unified Computing System (Cisco UCS), the more important
the technology becomes to your business. These services allow you to:
52
■
Optimize the uptime, performance, and efficiency of your UCS
■
Protect your vital business applications by rapidly identifying and addressing issues
■
Strengthen in-house expertise through knowledge transfer and mentoring
■
Improve operational efficiency by allowing UCS experts to augment your internal staff
resources
■
Enhance business agility by diagnosing potential issues before they affect your operations
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
CONFIGURING the SERVER
You can choose a service listed in Table 28.
Table 28
UCS Computing Combined Support Service
Product ID (PID)
Servic
e Level
GSP
On
Site?
Description
CON-NCF2-C220M3LF
NCF2
No
CMB SPT SVC 24X7X2 UCS C220 M3 Server - LFF
CON-NCF2P-C220M3LF
NCF2P
Yes
CMB SPT SVC 24X7X2OS UCS C220 M3 Server - LFF
CON-NCF4P-C220M3LF
NCF4P
Yes
CMB SPT SVC 24X7X4OS UCS C220 M3 Server - LFF
CON-NCF4S-C220M3LF
NCF4S
Yes
CMB SPT SVC 8X5X4OS UCS C220 M3 Server - LFF
CON-NCFCS-C220M3LF
NCFCS
Yes
CMB SPT SVC 8X5XNBDOS UCS C220 M3 Server - LFF
CON-NCFE-C220M3LF
NCFE
No
CMB SPT SVC 8X5X4 UCS C220 M3 Server - LFF
CON-NCFP-C220M3LF
NCFP
No
CMB SPT SVC 24X7X4 UCS C220 M3 Server - LFF
CON-NCFT-C220M3LF
NCFT
No
CMB SPT SVC 8X5XNBD UCS C220 M3 Server - LFF
Unified Computing Drive Retention Service
With the Cisco Unified Computing Drive Retention (UCDR) Service, you can obtain a new disk
drive in exchange for a faulty drive without returning the faulty drive. In exchange for a Cisco
replacement drive, you provide a signed Certificate of Destruction (CoD) confirming that the
drive has been removed from the system listed, is no longer in service, and has been destroyed.
Sophisticated data recovery techniques have made classified, proprietary, and confidential
information vulnerable, even on malfunctioning disk drives. The UCDR service enables you to
retain your drives and ensures that the sensitive data on those drives is not compromised, which
reduces the risk of any potential liabilities. This service also enables you to comply with
regulatory, local, and federal requirements.
If your company has a need to control confidential, classified, sensitive, or proprietary data, you
might want to consider one of the Drive Retention Services listed in Table 29.
NOTE: Cisco does not offer a certified drive destruction service as part of this
service.
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
53
CONFIGURING the SERVER
Table 29 Drive Retention Service Options
Service Description
Service
Program Name
SMARTnet for UCS
Service with Drive
Retention
UCS DR
SMARTnet for UCS
HW ONLY+Drive
Retention
UCS HW+DR
Service
Level GSP
Service Level
Product ID (PID)
UCSD7
24x7x4 Onsite
CON-UCSD7-C220M3LF
UCSD7
8x5xNBD Onsite
CON-UCSD5-C220M3LF
UCWD7
24x7x4 Onsite
CON-UCWD7-C220M3LF
UCWD5
8x5xNBD Onsite
CON-UCWD5-C220M3LF
For more service and support information, see the following URL:
http://www.cisco.com/en/US/services/ps2961/ps10312/Unified_Computing_Services_Overview.pdf
For a complete listing of available services for Cisco Unified Computing System, see this URL:
http://www.cisco.com/en/US/products/ps10312/serv_group_home.html
54
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
OPTIONAL STEP - ORDER RACK(s)
OPTIONAL STEP - ORDER RACK(s)
The optional R42610 rack is available from Cisco for the C-Series servers, including the C220 M3
LFF server. This rack is a standard 19-inch rack and can be ordered with a variety of options, as
listed in Table 30. Racks are shipped separately from the C220 M3 LFF server.
Table 30
Racks and Rack Options
Product ID (PID)
PID Description
RACK-UCS1
Cisco R42610 expansion rack, no side panels
RACK-UCS21
Cisco R42610 standard rack, w/side panels
RACK-BLANK-001
Filler panels (qty 12), 1U, plastic, toolless
RACK-CBLMGT-001
Cable mgt D rings (qty 10), metal
RACK-CBLMGT-011
Cable mgt straps (qty 10), Velcro
RACK-FASTEN-001
Mounting screws (qty 100), M6
RACK-FASTEN-002
Cage nuts (qty 50), M6
RACK-JOIN-001
Rack joining kit
Notes . . .
1. Use these same base PIDs to order spare racks (available only as next-day replacements).
For more information about the R42610 rack, see RACKS, page 74.
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
55
OPTIONAL STEP - ORDER PDU
OPTIONAL STEP - ORDER PDU
An optional power distribution unit (PDU) is available from Cisco for the C-Series rack servers,
including the C220 M3 server. This PDU is available in a zero rack unit (RU) style (see Table 30).
Table 31
PDU Options
Product ID (PID)
PID Description
RP208-30-2P-U-2
Zero RU PDU
For more information about the PDU, see PDUs, page 76.
56
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
SUPPLEMENTAL MATERIAL
SUPPLEMENTAL MATERIAL
CHASSIS
An internal view of the C220 M3 chassis with the top cover removed is shown in Figure 6.
Figure 6
C220 M3 LFF With Top Cover Off
2
3
4
5
6
8
7
9
10
11
SAS1
SAS2
SAS2
SAS1
FAN1
PCIe1
FAN2
CPU1
12
1
PCIe2
14
FAN3
PSU2
FAN4
13
CPU2
15
16
FAN5
PSU1
18
17
1
Drives
(hot-swappable, accessed through front panel)
10
Trusted platform module socket on
motherboard
2
Drive backplane
11
Standard-profile PCIe riser (PCIe slot 1)
3
SuperCap data cache power backup unit
mounting location
12
Low-profile PCIe riser (PCIe slot 2)
4
Cooling fans (five)
13
Cisco Flexible Flash SD socket SD2 on PCIe
riser 2
5
SCU upgrade ROM header (RAID key).
14
Cisco Flexible Flash SD socket SD1 on PCIe
riser 2
6
DIMM slots on motherboard (16)
15
Internal USB port
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
57
SUPPLEMENTAL MATERIAL
7
CPUs and heatsinks (two)
16
Power supplies (two, hot-swappable
access through rear panel)
8
Integrated RAID on motherboard, and mini-SAS
connectors
17
RTC battery on motherboard
9
Mezzanine RAID card, mini-SAS connectors
SAS1 and SAS2
18
Software RAID 5 header (RAID key).
CPUs and DIMMs
Physical Layout
Each CPU has four DIMM channels:
■
CPU1 has channels A, B, C, and D
■
CPU2 has channels E, F, G, and H
Each DIMM channel has two banks: bank 1 and bank 2. The blue-colored DIMM slots are for bank 1 and the
black-colored are for bank 2.
As an example, DIMM slots A1, B1, C1, and D1 belong to bank 1, while A2, B2, C2, and D2 belong to bank 2.
Figure 7 shows how banks and channels are physically laid out on the motherboard. The DIMM slots on the
right (channels A, B, C, and D) are associated with CPU1, while the DIMM slots on the left (channels E, F, G,
and H) are associated with CPU2. The bank 1 (blue) DIMM slots are always located farther away from a CPU
than the corresponding bank 2 (black) slots. Bank 1 slots (blue) are populated before bank 2 slots (black).
58
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
SUPPLEMENTAL MATERIAL
Figure 7
Physical Layout of CPU DIMM Channels and Banks
C1
C2
D1
D2
CPU1
Front of Server
B2
B1
A2
A1
G1
G2
H1
H2
F2
F1
E2
E1
331707
CPU2
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
59
SUPPLEMENTAL MATERIAL
Memory Population Rules
When considering the memory configuration of your server, you should consider the following items:
■
■
Each channel has two DIMM slots (for example, channel A = slots A1 and A2).
—
A channel can operate with one or two DIMMs installed.
—
If a channel has only one DIMM, populate slot 1 first (the blue slot).
When both CPUs are installed, populate the DIMM slots of each CPU identically.
—
Fill blue slots in the channels first: A1, E1, B1, F1, C1, G1, D1, H1
—
Fill black slots in the channels second: A2, E2, B2, F2, C2, G2, D2, H2
■
Any DIMM installed in a DIMM socket for which the CPU is absent is not recognized.
■
Observe the DIMM mixing rules shown in Table 32
Table 32 DIMM Rules for C220 M3 Servers
DIMM Parameter
DIMMs in the Same Channel
DIMM in the Same Bank1
RDIMM = 4, 8, or 16 GB
DIMMs in the same channel (for
example, A1 and A2) can have
different capacities.
For best performance, DIMMs in the
same bank (for example, A1, B1, C1,
D1) should have the same capacity.
LRDIMM = 32 GB
You cannot mix 32 GB LRDIMMs with
any RDIMM or UDIMM
You cannot mix 32 GB LRDIMMs with
any RDIMM or UDIMM
UDIMM = 4 GB
You cannot mix 4 GB UDIMMs with
any RDIMM or LRIMM
You cannot mix 4 GB UDIMMs with
any RDIMM or LRIMM
DIMMs will run at the lowest speed
of the DIMMs/CPUs installed
DIMMs will run at the lowest speed of
the DIMMs/CPUs installed
You cannot mix DIMM types in a
channel
You cannot mix DIMM types in a bank
1 DPC or 2 DPC
3 DPC
See Table 5 on page 20 for
valid LRDIMM and RDIMM 1 DPC and
2 DPC memory configurations
3 DPC is not supported
DIMM Capacity
DIMM Speed
1866-, 1600-, or 1333-MHz2
DIMM Type
RDIMMs, LRDIMMs, or
UDIMMs
DIMMs per Channel (DPC)
UDIMMs run at 1066 MHz at 1.35 V
and 1333 MHz at 1.5 V
Notes . . .
1. Although you can have different DIMM capacities in the same bank, this will result in less than optimal
performance. For optimal performance, all DIMMs in the same bank should be identical.
2. Only 1866-, 1600-, and 1333-MHz DIMMs are currently available for the C220 M3 server.
60
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
SUPPLEMENTAL MATERIAL
DIMM Population Order
Populate the DIMMs for a CPU according to Table 33.
Table 33
DIMM Population Order per CPU
DIMMs
per CPU
Populate
CPU 1 Slots
Populate
CPU 2 Slots
1
A1
E1
2
A1, B1
E1, F1
3
A1, B1, C1
E1, F1, G1
4
A1, B1, C1, D1
E1, F1, G1, H1
61
A1, B1, C1,
E1, F1, G1,
A2, B2, C2
E2, F2, G2
A1, B1, C1, D1,
E1, F1, G1, H1,
A2, B2, C2, D2
E2, F2, G2, H2
8
Notes . . .
1. Not recommended (for performance reasons)
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
61
SUPPLEMENTAL MATERIAL
Recommended Memory Configuration
This section explains the recommended DIMM population order rules for the C220 M3 server.
■
All DIMMs must be DDR3 DIMMs.
■
Do not mix:
—
DIMMs with different clock rates in a channel
—
RDIMMs and LRDIMMs
—
ECC and non-ECC DIMMs
■
There are blue and black DIMM slots. Populate blue slots first.
■
When single- and dual-rank DIMMs are populated for 2DPC, always populate the dual-rank
DIMM in the blue DIMM slot and the single-rank DIMM in the black DIMM slot.
Many memory configurations are possible. For best results, follow Table 34 when populating 1600- and
1866-MHz DIMMs for Intel Xeon E5-2600 v2 CPUs and Table 35 when populating 1600-MHz DIMMs for Intel
Xeon E5-2600 CPUs.
Table 34 Recommended Memory Configurations for Intel Xeon E5-2600 v2 CPUs (with 1600- and 1866-MHz DIMMs)1
Total
System
Memory
Size
32 GB
64 GB
96 GB
128 GB
192 GB
256 GB
62
CPU 1 DIMMs
CPU 2 DIMMs
Blue Slots
Black Slots
Blue Slots
Black Slots
Bank 2
Bank 1
Bank 1
Bank 2
(A1,B1, C1,D1) (A2,B2, C2,D2) (E1,F1, G1,H1) (E2,F2, G2,H2)
DIMM Max
Speed (MHz)
Total DIMMs
4x4 GB
—
4x4 GB
—
N/A2
8
2x8 GB
—
2x8 GB
—
1866
4
4x4 GB
4x4 GB
4x4 GB
4x4 GB
N/A2
16
4x8 GB
—
4x8 GB
—
1866
8
4x8 GB
2x8 GB
4x8 GB
2x8 GB
1866
12
3x16 GB
—
3x16 GB
—
1866
6
4x8 GB
4x4 GB
4x8 GB
4x4 GB
N/A2
16
4x8 GB
4x8 GB
4x8 GB
4x8 GB
1866
16
4x16 GB
—
4x16 GB
—
1866
8
4x16 GB
2x16 GB
4x16 GB
2x16 GB
1866
12
4x16 GB
4x8 GB
4x16 GB
4x8 GB
1866
16
4x16 GB
4x16 GB
4x16 GB
4x16 GB
1866
16
4x32 GB
—
4x32 GB
—
1866
8
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
SUPPLEMENTAL MATERIAL
Table 34 Recommended Memory Configurations for Intel Xeon E5-2600 v2 CPUs (with 1600- and 1866-MHz DIMMs)1
Total
System
Memory
Size
512 GB
CPU 1 DIMMs
CPU 2 DIMMs
Blue Slots
Black Slots
Blue Slots
Black Slots
Bank 1
Bank 2
Bank 1
Bank 2
(A1,B1, C1,D1) (A2,B2, C2,D2) (E1,F1, G1,H1) (E2,F2, G2,H2)
4x32 GB3
4x32 GB
4x32 GB
4x32 GB
DIMM Max
Speed (MHz)
Total DIMMs
1866
16
Notes . . .
1. Rows marked in yellow indicate best performance.
2. 1866-MHz 4 GB DIMMs are not offered.
3. 32 GB LRDIMMs run in some cases at a maximum speed of 1333 MHz in 2DPC configurations, even though the
specified DIMM speed is higher.
Table 35 Recommended Memory Configurations for Intel Xeon E5-2600 CPUs ( with 1600-MHz DIMMs)1
Total
System
Memory
Size
32 GB
64 GB
96 GB
128 GB
192 GB
256 GB
CPU 1 DIMMs
CPU 2 DIMMs
Blue
Black Slots
Blue Slots
Slots
Bank 2
Bank 1
Bank 1
(A2,B2, C2,D2) (E1,F1, G1,H1)
(A1,B1, C1,D1)
Black Slots
Bank 2
(E2,F2,
G2,H2)
DIMM Max
Speed (MHz)
Total DIMMs
4x4 GB
—
4x4 GB
—
1600
8
2x8 GB
—
2x8 GB
—
1600
4
4x4 GB
4x4 GB
4x4 GB
4x4 GB
1600
16
4x8 GB
—
4x8 GB
—
1600
8
4x8 GB
2x8 GB
4x8 GB
2x8 GB
1600
12
3x16 GB
—
3x16 GB
—
1600
6
4x8 GB
4x4 GB
4x8 GB
4x4 GB
1600
16
4x8 GB
4x8 GB
4x8 GB
4x8 GB
1600
16
4x16 GB
—
4x16 GB
—
1600
8
4x16 GB
2x16 GB
4x16 GB
2x16 GB
1600
12
4x16 GB
4x8 GB
4x16 GB
4x8 GB
1600
16
4x16 GB
4x16 GB
4x16 GB
4x16 GB
1600
16
4 x 32 GB
—
4 x 32 GB
—
1600
8
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
63
SUPPLEMENTAL MATERIAL
Table 35 Recommended Memory Configurations for Intel Xeon E5-2600 CPUs ( with 1600-MHz DIMMs)1
Total
System
Memory
Size
512 GB
CPU 1 DIMMs
CPU 2 DIMMs
Blue
Black Slots
Blue Slots
Slots
Bank 2
Bank 1
Bank 1
(A2,B2, C2,D2) (E1,F1, G1,H1)
(A1,B1, C1,D1)
Black Slots
Bank 2
(E2,F2,
G2,H2)
DIMM Max
Speed (MHz)
Total DIMMs
4x32 GB
4x32 GB
1333
16
4x32 GB2
4x32 GB
Notes . . .
1. Rows marked in yellow indicate best performance.
2. 32 GB LRDIMMs run in some cases at a maximum speed of 1333 MHz in 2DPC configurations, even though the
specified DIMM speed is higher.
64
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
SUPPLEMENTAL MATERIAL
Additional DIMM Populations
The list in Table 36 is not a complete list of all supported DIMM populations, but highlights common
configuration options.
Table 36 Supported DIMM Configurations
Total DIMMs
for CPU 2
CPU 2
Capacity
Total
Capacity for
2 CPUs
1 x 8 GB
1
8 GB
16 GB
16 GB
1 x 16 GB
1
16 GB
32 GB
2
8 GB
2 x 4 GB
2
8 GB
16 GB
4 x 4 GB
4
16 GB
4 x 4 GB
4
16 GB
32 GB
2 x 8 GB
2
16 GB
2 x 8 GB
2
16 GB
32 GB
6 x 4 GB
6
24 GB
6 x 4 GB
6
24 GB
48 GB
8 x 4 GB
8
32 GB
8 x 4 GB
8
32 GB
64 GB
4 x 8 GB
4
32 GB
4 x 8 GB
4
32 GB
64 GB
8 x 4 GB
8
32 GB
8 x 4 GB
8
32 GB
64 GB
1 x 32 GB
1
32 GB
1 x 32 GB
1
32 GB
64 GB
5 x 8 GB
5
40 GB
5 x 8 GB
5
40 GB
80 GB
3 x 16 GB
3
48 GB
3 x 16 GB
3
48 GB
96 GB
6 x 8 GB
6
48 GB
6 x 8 GB
6
48 GB
96 GB
4x8 GB + 4x4 GB
8
48 GB
4x8 GB + 4x4 GB
8
48 GB
96 GB
7 x 8 GB
7
56 GB
7 x 8 GB
7
56 GB
112 GB
4 x 16 GB
4
64 GB
4 x 16 GB
4
64 GB
128 GB
8 x 8 GB
8
64 GB
8 x 8 GB
8
64 GB
128 GB
2 x 32 GB
2
64 GB
2 x 32 GB
2
64 GB
128 GB
5 x 16
5
80 GB
5 x 16
5
80 GB
160 GB
4x16 GB + 4x4 GB
8
80 GB
4x16 GB + 4x4 GB
8
80 GB
160 GB
6 x 16 GB
6
96 GB
6 x 16 GB
6
96 GB
192 GB
4x8 GB + 4x16 GB
8
96 GB
4x8 GB + 4x16 GB
8
96 GB
192 GB
3 x 32 GB
3
96 GB
3 x 32 GB
3
96 GB
192 GB
7 x 16 GB
7
112 GB
7 x 16 GB
7
112 GB
224 GB
8 x 16 GB
8
128 GB
8 x 16 GB
8
128 GB
256 GB
4 x 32 GB
4
128 GB
4 x 32 GB
4
128 GB
256 GB
8 x 32 GB
8
256 GB
8 x 32 GB
8
256 GB
512 GB
Total DIMMs
for CPU 1
CPU 1
Capacity
1 x 8 GB
1
8 GB
1 x 16 GB
1
2 x 4 GB
CPU 1 DIMMs
CPU 2 DIMMs
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
65
SUPPLEMENTAL MATERIAL
Low-Voltage DIMM Considerations
The C220 M3 server can be ordered with dual-voltage (1.5/1.35 V) DIMMs only. Note the following
considerations:
66
■
Low-voltage DIMMs within the server must have the identical manufacturer, type, speed,
and size.
■
Low-voltage DIMMs and standard-voltage DIMMs can be mixed in the same server. Note that
this causes the system BIOS to default to standard-voltage operation (Performance Mode).
That is, the server cannot operate in Power Saving Mode unless all DIMMs are low-voltage
DIMMs.
■
CPUs that have a maximum memory frequency less than 1333 MHz support low-voltage
DIMMs operating in Power Saving Mode only, and do not support Performance Mode.
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
SUPPLEMENTAL MATERIAL
RAID Details
The available RAID configurations are shown in this section.
(1) 1-CPU Configurations
Mezzanine cards are not supported for 1-CPU configurations, Therefore, only the following RAID
controllers are supported for single-CPU configurations. Select one of these:
■
An embedded RAID controller (on motherboard) from Table 6 on page 23
■
One internal drive RAID controller (slot 1 only) from Table 8 on page 24
■
One external drive RAID controller (slot 1 only) from Table 8 on page 24
NOTE: PCIe slot 2 is not supported for 1-CPU configurations
NOTE: In 1-CPU configurations, PCIe slot 1 is the default slot supported for an
internal drive RAID controller. PCIe slots 1 or 2 can be used for one external drive
RAID controller or for PCIe expansion cards. You can change the default card slot for
a RAID controller to a different slot by going into the BIOS and reconfiguring the
option ROM (OPROM) settings.
You may also select an appropriate optional RAID configuration listed in Table 8 on page 24
(2) 2-CPU Configurations
Select one of the following:
■
An embedded RAID controller (on motherboard) from Table 6 on page 23
■
One mezzanine RAID controller from Table 7 on page 23
■
One internal drive RAID controller (slot 2) from Table 8 on page 24
■
One external drive RAID controller (slot 1 or 2) from Table 8 on page 24
■
One mezzanine RAID controller from Table 7 on page 23 and one external drive RAID
controller (slot 1 or 2) from Table 7 on page 23
NOTE: In 2-CPU configurations, PCIe slot 2 is the default slot supported for an
internal drive RAID controller. Slot 1 or slot 2 can be used for one external drive RAID
controller or PCIe expansion cards. You can change the default card slot for a RAID
controller to a different slot by going into the BIOS and reconfiguring the option ROM
(OPROM) settings.
You may also select an appropriate optional RAID configuration listed in Table 8 on page 24
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
67
SUPPLEMENTAL MATERIAL
RAID Option ROM (OPROM) Settings
The server contains an Option ROM (OPROM) for the PCIe slots. The server has a finite amount of option
ROM with which it can boot up devices. Go into the BIOS and disable the OPROM on the PCIe slots not used
for booting so that resources are available for the slots that are used for booting. An example OPROM BIOS
screen is shown in Figure 8.
Figure 8
68
Example BIOS Screen for OPROM
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
SUPPLEMENTAL MATERIAL
Serial Port Details
The pinout details of the rear port RJ-45 serial port connector are shown in Figure 9.
Figure 9
Serial Port (Female RJ-45 Connector) Pinout
Serial Port (RJ-45 Female Connector)
Pin Signal
1
2
3
4
5
6
7
8
RTS (Request to Send)
DTR (Data Terminal Ready)
TxD (Transmit Data)
GND (Signal Ground)
GND (Signal Ground)
RxD (Receive Data)
DSR (Data Set Ready)
CTS (Clear to Send)
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
69
SUPPLEMENTAL MATERIAL
Upgrade and Servicing-Related Parts
This section lists the upgrade and servicing-related parts you may need during the life of your server. Some
of these parts are configured with every server, and some may be ordered when needed or may be ordered
and kept on hand as spares for future use. See Table 37.
Table 37 Upgrade and Servicing-related Parts for UCS C220 M3 LFF Server
Spare Product ID (PID)
Description
UCSC-BBLKD-L=
3.5-inch HDD Blanking Panel1
UCSC-CABLE3=
Spare SAS/SATA Cable (1) for C220 M3 LFF (3.5-in)
UCSC-PCIF-01H=
PCIe Low Profile blanking panel for UCS C-Series Server
UCSC-PCIF-01F=
PCIe Full Height blanking panel for UCS C-Series Server
UCSC-HS-C220M3=
Heat Sink for UCS C220 M3 Rack Server1
UCSC-AIRBAF-C220=
Air Baffle Replacement Kit for C220 M3 Server1
N20-MBLIBATT=
Replacement Lithium Battery for Server Motherboard (CR2032)1
UCS-RAID-BBU=
Battery Back-Up for 92662
CAUTION: If one of your RAID cards is equipped with a
battery backup unit (BBU), be aware that hot swapping the
BBU is not supported. Please perform a graceful shutdown
of the server prior to replacing the BBU.
UCS-RAID-CV-SC=
LSI CacheVault Power Module for 9266CV-8i, 9271CV-8i, 9285CV-8e and
9286CV-8e3
UCSC-PSU-BLKP=
Power supply blanking panel/filler for C-Series Servers
UCSC-CMA1=
Reversible Cable Management Arm for C220 rack servers
UCSC-RAIL1=
Rail Kit for C220 rack servers
UCSC-RAIL1-I=
Inner rail spare for C2204
UCS-SD-16G=
Blank SD Card for UCS servers5
UCS-USBFLSH-S-4GB=
4GB SLC Flash USB Drive (shorter) for all servers except C260
N20-BKVM=
KVM local IO cable for UCS servers console port6
UCS-CPU-EP-PNP=
Pick n place CPU tools for M3/EP 10/8/6/4/2 core CPUs (Green)7
UCS-CPU-EP2-PNP=
Pick n place CPU tools for M3/EP v2 12 core CPUs (Purple)8
70
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
SUPPLEMENTAL MATERIAL
Table 37 Upgrade and Servicing-related Parts for UCS C220 M3 LFF Server
Spare Product ID (PID)
Description
UCS-CPU-GREASE2=
Thermal grease-for 2 CPUs-only for C220/C240-Red tip syringe8
UCSX-HSCK=
UCS Processor Heat Sink Cleaning Kit (when replacing a CPU)8
Notes . . .
1. This part is included/configured with your UCS server (in some cases, as determined by the configuration of
your server).
2. If your server contains an LSI MegaRAID SAS 9266-8i RAID controller card with battery backup
(UCS-RAID-9266), the card contains a battery backup unit (UCS-RAID-BBU), which can be replaced. If your
server contains an LSI MegaRAID SAS 9266-8i RAID controller card without a battery backup unit
(UCS-RAID-9266NB), the card does not contain a battery backup unit (UCS-RAID-BBU); however, you can
retrofit the card with a battery backup if desired. Note that you cannot retrofit a UCS-RAID-9266NB or
UCS-RAID-9266 RAID card with an LSI Cachevault Power Module (also known as a Supercap).
3. You can order a replacement only for the RAID cards listed. You cannot retrofit a UCS-RAID-9266NB or
UCS-RAID-9266 RAID card with an LSI Cachevault Power Module (also known as a Supercap)
4. The server is shipped with the inner rail attached to the chassis.
5.
6.
7.
8.
This SD card is blank. The required image for the C220 server can be downloaded to the card.
This part is included/configured with the server chassis.
This part is included with the purchase of each optional or spare Intel Xeon E5-2600 CPU processor kit.
This part is included with the purchase of each optional or spare Intel Xeon E5-2600 v2 CPU processor kit.
Drive Blanking Panels
A drive blanking panel (UCSC-BBLKD-L=) must be installed if you remove a disk drive from a UCS server.
These panels are required to maintain system temperatures at safe operating levels, and to keep dust away
from system components.
Upgrading your Server from Intel Xeon E5-2600 to Intel Xeon E5-2600 v2 CPUs (or
downgrading from Intel Xeon E5-2600 v2 to Intel Xeon E5-2600 CPUs)
See the following link:
http://www.cisco.com/en/US/docs/unified_computing/ucs/hw/CPU/IVB/install/IVB-B.html
Adding an Additional CPU (with CPU heat sink)
All Cisco UCS two CPU socket-capable servers can be upgraded from having one to having two CPUs
configured. You will need to order and install a heat sink when adding any additional CPU to a server.
Instructions for installing the new CPU and heat sink can be found at the following link:
http://www.cisco.com/en/US/docs/unified_computing/ucs/c/hw/C220/install/replace.html#wp1233864
Motherboard Lithium Battery
You can order a replacement motherboard battery. Installation instructions are found at this link:
http://www.cisco.com/en/US/docs/unified_computing/ucs/c/hw/C220/install/replace.html#wp1235772
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
71
SUPPLEMENTAL MATERIAL
CPU Removal and Installation (“pick n place”) Tool Set
The Pick n Place tool set includes two tools:
■ Pick and pull cap tool - used to pull off the plastic protective cap covering an empty CPU socket and
to remove or lift a CPU processor without touching it
Pick and place tool - used to install a CPU in its socket without damage. Must be used each time a
CPU is installed in a UCS “M3” server.
■
Instructions for using this tool set are found at the following link:
http://www.cisco.com/en/US/docs/unified_computing/ucs/c/hw/C220/install/replace.html#wp1233864
NOTE: When you purchase a spare CPU, the Pick n Place Toolkit is included.
Thermal Grease (with syringe applicator) for CPU to Heatsink Seal
Thermal grease must be applied to the top of the CPU where it comes in contact with the heat sink.
Instructions for applying thermal grease are found at:
http://www.cisco.com/en/US/docs/unified_computing/ucs/c/hw/C220/install/replace.html#wp1233864
CAUTION: Use only the thermal grease specified for this server
(UCS-CPU-GREASE2=). This thermal grease comes in a red-tipped syringe
and is to be used only in the C220 M3 and C240 M3 servers. Other servers
use thermal grease in a blue-tipped syringe (UCS-CPU-GREASE=).
Thermal grease for other systems may have different thermal
conductivity properties and may cause overheating if used in the C220 M3
or C240 M3 servers.
DO NOT use thermal grease available for purchase at any commercial
electronics store. If these instructions are not followed, the CPU may
overheat and be destroyed.
CAUTION:
NOTE: When you purchase a spare CPU, the thermal grease with syringe applicator
is included.
Air Baffle Replacement Kit
Air baffles are designed to direct airflow through the server to maintain server temperature at a safe
operating level. These baffles must always remain installed during server operation. The Air Baffle
Replacement Kit includes the air baffles needed for one UCS C220 M3 server.
72
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
SUPPLEMENTAL MATERIAL
CPU Heat Sink Cleaning Kit
The cleaning kit is used to remove the existing thermal compound from the bottom of the heat sink during
a CPU replacement process. Instructions for cleaning are found at the following link:
http://www.cisco.com/en/US/docs/unified_computing/ucs/c/hw/C220/install/replace.html#wp1233864
NOTE: When you purchase a spare CPU, the CPU cleaning kit is included.
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
73
SUPPLEMENTAL MATERIAL
RACKS
The Cisco R42610 rack (see Figure 10) is certified for Cisco UCS installation at customer sites and is
suitable for the following equipment:
■
Cisco UCS B-Series servers and fabric interconnects
■
Cisco UCS C-Series and select Nexus switches
The rack is compatible with hardware designed for EIA-standard 19-inch racks. Rack specifications are
listed in Table 38.
Table 38 Cisco R42610 Rack Specifications
Parameter
Standard Rack
Expansion Rack
Dimensions (H x W x D)
78.74 x 24 x 43.38 in.
(2000 x 610 x 1102 mm)
78.74 x 23.58 x 43.38 in.
(2000 x 599 x 1102 mm)
Dimensions (H x W x D)
with packaging
89 x 33 x 47 in.
(2261 x 838 x 1194 mm)
89 x 33 x 47 in.
(2261 x 838 x 1194 mm)
Distance from front
mounting rail to rear
mounting rail
29.2 in (741 mm)
29.2 in (741 mm)
Weight
299.83 lb (136 kg)
231. 49 lb (105 kg)
Weight with packaging
354 lb
(161 kg)
284 lb
(129 kg)
Side panels included
Yes
No
Equipment mounting
capacity
42RU
42RU
Static load capacity
2100 lb
(954 kg)
2100 lb
(954 kg)
Dynamic load capacity
Not applicable
Not applicable
NOTE: The AC input connector is an IEC 320 C-14 15 A/250 VAC power inlet.
74
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
SUPPLEMENTAL MATERIAL
Figure 10
Cisco R42610 Rack
Front view - door closed
Front view - door open
Front view - door removed
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
75
SUPPLEMENTAL MATERIAL
PDUs
Cisco RP Series Power Distribution Units (PDUs) offer power distribution with branch circuit protection.
Cisco RP Series PDU models distribute power to up to 24 outlets. The architecture organizes power
distribution, simplifies cable management, and enables you to move, add, and change rack equipment
without an electrician.
With a Cisco RP Series PDU in the rack, you can replace up to two dozen input power cords with just one.
The fixed input cord connects to the power source from overhead or under-floor distribution. Your IT
equipment is then powered by PDU outlets in the rack using short, easy-to-manage power cords.
The C-series severs accept the zero-rack-unit (0RU) PDU. See Figure 11).
Figure 11
Zero Rack Unit PDU (PID = RP208-30-2P-U-2)
1
Breakers
3
C19 plugs
2
Ground connection
4
C13 plugs
Cisco RP Series PDU models provide two 20-ampere (A) circuit breakers for groups of receptacles. The
effects of a tripped circuit are limited to a receptacle group. Simply press a button to reset that circuit.
76
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
SUPPLEMENTAL MATERIAL
KVM CABLE
The KVM cable provides a connection into the server, providing a DB9 serial connector, a VGA connector for
a monitor, and dual USB ports for a keyboard and mouse. With this cable, you can create a direct
connection to the operating system and the BIOS running on the server.
The KVM cable ordering information is listed in Table 39.
Table 39 KVM Cable
Product ID (PID)
PID Description
N20-BKVM
KVM cable for B-Series Blade Server console port
Figure 12
KVM Cable
1
Connector (to server front panel)
3
VGA connector (for a monitor)
2
DB-9 serial connector
4
Two-port USB connector (for a mouse and
keyboard)
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
77
SUPPLEMENTAL MATERIAL
Motherboard USB and SD Ports, and RAID Card Backup Location
The C220 M3 LFF motherboard has a general-purpose USB socket, and two SD sockets as shown in Figure 13.
The mounting location for the RAID SuperCap data cache power backup module is also shown.
Figure 13
Motherboard USB and SD Ports and RAID Card Backup Location
4
SAS1
SAS2
SAS2
SAS1
FAN1
PCIe1
FAN2
CPU1
2
PCIe2
FAN3
PSU2
FAN4
1
CPU2
3
FAN5
331714
PSU1
1
SD1 socket
3
USB connector
2
SD2 socket
4
SuperCap module mounting location
78
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
Dimensions and Weight
Table 40 UCS C220 M3 LFF Dimensions and Weight
Parameter
Value
Height
1.7 in. (4.32 cm)
Width
16.92 in.(43.0 cm)
Depth
29.7 in. (75.5 cm)
Front Clearance
3 in. (76 mm)
Side Clearance
1 in. (25 mm)
Rear Clearance
6 in. (152 mm)
Weight
Maximum (4 HDDs, 2 CPUs, 16 DIMMs, 2 power supplies)
37.1 lbs (16.8 kg)
Minimum (1 HDD, 1 CPU, 1 DIMM, 1 power supply)
28.5 lbs (12.9 kg)
Bare (0 HDD, 0 CPU, 0 DIMM, 1 power supply)
23.4 lbs (10.6 kg)
Power Specifications
The general power specifications for the C220 M3 LFF server 450 W (AC) power supply are listed in
Table 41.
Table 41 UCS C220 M3 LFF 450 W AC Power Supply Specifications
Description
Specification
AC input voltage
90 to 264 VAC self-ranging,
100 to 120 VAC nominal
200 to 240 VAC nominal
AC input frequency
Range: 47 to 63 Hz (single phase, 50 to 60 Hz nominal)
Maximum AC input current
6 A maximum @ 100 VAC
3 A maximum @ 208 VAC
Maximum AC inrush current
9 A peak @ 35° C, 208 VAC
Maximum output power for the
power supply
450 W
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
79
TECHNICAL SPECIFICATIONS
Table 41 UCS C220 M3 LFF 450 W AC Power Supply Specifications (continued)
Description
Specification
Power supply output voltage
Main power: 12 VDC
Standby power: 12 VDC
Power supply efficiency
CSCI Platinum
NOTE: AC input connector is an IEC 320 C-14 15A/250VAC power inlet.
The general power specifications for the C220 M3 LFF server 650 W (AC) power supply are listed in
Table 41.
Table 42 UCS C220 M3 LFF 650 W AC Power Supply Specifications
Description
Specification
AC input voltage
90 to 264 VAC self-ranging,
100 to 120 VAC nominal
200 to 240 VAC nominal
AC input frequency
Range: 47 to 63 Hz (single phase, 50 to 60 Hz nominal)
Maximum AC input current
7.6 A maximum @ 100 VAC
3.65 A maximum @ 208 VAC
Maximum AC inrush current
11 A peak @ 35° C, 208 VAC
Maximum output power for the
power supply
650 W
Power supply output voltage
Main power: 12 VDC
Standby power: 12 VDC
Power supply efficiency
CSCI Platinum
NOTE: AC input connector is an IEC 320 C-14 15A/250VAC power inlet.
80
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
TECHNICAL SPECIFICATIONS
The general power specifications for the C220 M3 SFF server 930 W (DC) power supply are listed in Table 43
Table 43 UCS C240 M3 SFF Power Specifications 930 W DC power supply)
Description
Class
Specification
■
RSP1
DC input voltage range
■
40 to 72 VDC (self-ranging, 48 to 60 VDC nominal)
DC line input current (steady state)
■
23 A peak at 48 VDC
12 V main power output
■
930 W
12 V standby power output
■
30 W
Power supply output voltage
■
Main power: 12 VDC
■
Standby power: 12 VDC
■
2.5 A minimum (within 40 - 72 VDC range)
Input
Output
Rated output load
For configuration-specific power specifications, use the Cisco UCS Power Calculator at this URL:
https://express.salire.com/Go/Cisco/Cisco-UCS-Power-Calculator.aspx
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
81
TECHNICAL SPECIFICATIONS
Environmental Specifications
The power specifications for the C220 M3 server are listed in Table 44.
Table 44 UCS C220 M3 Environmental Specifications
Parameter
Minimum
Temperature operating
41 to 104° F (5 to 40° C)
derate the maximum temperature by 1°C per every 305m of
altitude above sea level
Temperature nonoperating
–40 to 149°F (–40 to 65°C)
Humidity (RH) nonoperating,
non-condensing
10 to 90%
Altitude operating
0 to 3,000 m (0 to 10,000 ft.)
Altitude nonoperating
0 to 12,192 m (0 to 40,000 ft.)
Sound Power level, Measure
A-weighted per ISO7779 LWAd (Bels)
Operation at 73°F (23°C)
5.4
Sound Pressure level, Measure
A-weighted per ISO7779 LpAm (dBA)
Operation at 73°F (23°C)
37
82
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
TECHNICAL SPECIFICATIONS
Compliance Requirements
The regulatory compliance requirements for C-Series servers are listed in Table 45.
Table 45 UCS C-Series Regulatory Compliance Requirements
Parameter
Description
Regulatory Compliance
Products should comply with CE Markings per directives
2004/108/EC and 2006/95/EC
Safety
UL 60950-1 Second Edition
CAN/CSA-C22.2 No. 60950-1 Second Edition
EN 60950-1 Second Edition
IEC 60950-1 Second Edition
AS/NZS 60950-1
GB4943 2001
EMC - Emissions
47CFR Part 15 (CFR 47) Class A
AS/NZS CISPR22 Class A
CISPR22 Class A
EN55022 Class A
ICES003 Class A
VCCI Class A
EN61000-3-2
EN61000-3-3
KN22 Class A
CNS13438 Class A
EMC - Immunity
EN55024
CISPR24
EN300386
KN24
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
83
TECHNICAL SPECIFICATIONS
84
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
Download PDF
Similar pages