PT-7828 Series - Express Systems &

Industry-specific Ethernet Switches
PT-7828 Series
IEC 61850-3 / EN 50155 24+4G-port Layer 3 Gigabit
modular managed rackmount Ethernet switches
››IEC 61850-3, IEEE 1613 (power substations) and EN 50121-4
(railway applications) compliant
››Complies with a portion of EN 50155 specifications
››Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250
switches), RSTP/STP, and MSTP for network redundancy
››Up to 12 ports with M12 connectors
››Isolated redundant power supplies with universal 24 VDC, 48
VDC, or 110/220 VDC/VAC power supply range
››Supports multicast routing protocols PIM-DM/DVMRP
››-40 to 85°C operating temperature range
Introduction
The PowerTrans PT-7828 switches are high performance Layer
3 Ethernet switches that support Layer 3 routing functionality to
facilitate the deployment of applications across networks. The PT-7828
switches are also designed to meet the strict demands of power
substation automation systems (IEC 61850-3, IEEE 1613), and railway
applications (EN 50121-4). The PT-7828 series also features critical
packet prioritization (GOOSE, SMVs, and PTP).
General Features and Benefits
• Layer 3 switching functionality to divide a large network into
hierarchical subnets and allow data and information to communicate across networks
• Command Line Interface (CLI) for quickly configuring major
managed functions
• Software-based IEEE 1588v2 PTP (Precision Time Protocol) for
time synchronization of networks
• DHCP Option 82 for IP address assignment with different policies
• EtherNet/IP and Modbus/TCP industrial Ethernet protocols
supported
• Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250
switches), RSTP/STP, and MSTP for network redundancy
Cybersecurity Features
• User passwords with multiple levels of security protect against
unauthorized configuration
• SSH/HTTPS is used to encrypt passwords and data
• Lock switch ports with 802.1X port-based network access control
so that only authorized clients can access the port
• Disable one or more ports to block network traffic
Specifications
Technology
Standards:
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseX
IEEE 802.3x for Flow Control
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1s for Multiple Spanning Tree Protocol
1
The PT-7828’s Gigabit and Fast Ethernet backbone, redundant ring,
and 24 VDC, 48 VDC, or 110/220 VDC/VAC dual isolated redundant
power supplies increase the reliability of your communications and
save on cabling and wiring costs. The modular design of the PT-7828
makes network planning easy, and allows greater flexibility by letting
you install up to 4 Gigabit ports and 24 Fast Ethernet ports. Optional
front or rear wiring makes the PT-7828 switches suitable for a variety
of applications.
• Supports multicast routing protocols PIM-DM/DVMRP
• Supports advanced VLAN capability with Q-in-Q tagging
• IGMP snooping and GMRP for filtering multicast traffic from
industrial Ethernet protocols
• IEEE 802.3ad, LACP for optimum bandwidth utilization
• Bandwidth management prevents unpredictable network status
• Multi-port mirroring for online debugging
• Automatic warning by exception through email, relay output
• RMON for efficient network monitoring and proactive capability
• Automatic recovery of connected device’s IP addresses
• Line-swap fast recovery
• Configurable by web browser, Telnet/serial console, CLI Windows
utility, and ABC-01 automatic backup configurator
• 802.1Q VLAN allows you to logically partition traffic transmitted
between selected switch ports
• Secure switch ports so that only specific devices and/or MAC
addresses can access the ports
• RADIUS/TACACS+ allows you to manage passwords from a central
location
• SNMPv3 provides encrypted authentication and access security
Layer 3 Modular Rackmount Ethernet Switch
System, PT-7828
Slot 1
Slot 2
Slot 3
Slot 4
w w w. m o x a . c o m
Industry-specific Ethernet Switches
IEEE 802.1w for Rapid STP
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP
Software Features
Management: IPv4/IPv6, SNMPv1/v2c/v3, DHCP Server/Client, BootP,
TFTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, DHCP Option
66/67/82, LLDP, Flow Control, Back Pressure Flow Control, SNMP
Inform, Port Mirror, Syslog
Filter: IGMPv1/v2/v3, GMRP, GVRP, 802.1Q, Q-in-Q VLAN
Redundancy Protocols: STP/RSTP, MSTP, Turbo Ring v1/v2, Turbo
Chain, Link Aggregation, VRRP
Security: RADIUS, TACACS+, SSL, SSH, Port Lock, Broadcast Storm
Protection
Unicast Routing: Static routing, RIP V1/V2, OSPF
Multicast Routing: DVMRP and PIM-DM
Time Management: SNTP, NTP Server/Client, IEEE 1588v2 PTP
Industrial Protocols: EtherNet/IP, Modbus/TCP
MIB: MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge
MIB, RSTP MIB, RMON MIB Groups 1, 2, 3, 9
Power Substation: IEC 61850 QoS
Switch Properties
Priority Queues: 4
Max. Number of VLANs: 64
VLAN ID Range: VID 1 to 4094
IGMP Groups: 256
Interface
Fast Ethernet: Slots 1, 2, and 3 for combinations of 2, 4, 6, or 8-port
PM-7200 Fast Ethernet modules with 10/100BaseT(X) (TP/M12
interface), 100BaseFX (SC/ST/MTRJ connector), or 100BaseSFP
Gigabit Ethernet: Slot 4 for 2 or 4-port PM-7200 Gigabit Ethernet
combo module, 10/100/1000BaseT(X) or 1000BaseSFP
Console Port: RS-232 (RJ45)
Alarm Contact: 1 relay output with current carrying capacity of 3 A @
30 VDC or 3 A @ 240 VAC
Power Requirements
• 18 to 36 V (24 VDC)
• 36 to 72 V (48 VDC)
• 88 to 300 VDC, 85 to 264 VAC (110/220 VDC/VAC)
Input Current: (all ports are equipped with fiber)
• Max. 2.38 A @ 24 VDC
• Max. 1.12 A @ 48 VDC
• Max. 0.59/0.30 A @ 110/220 VDC
• Max. 0.49/0.26 A @ 110/220 VAC
Overload Current Protection: Present
Connection: 10-pin terminal block
Reverse Polarity Protection: Present
Physical Characteristics
Housing: Aluminum alloy
IP Rating: IP30 protection
Dimensions: 440 x 44 x 325 mm (17.32 x 1.73 x 12.80 in)
Weight: 5900 g (13.11 lb)
Installation: 19-inch rack mounting
Environmental Limits
Operating Temperature: -40 to 85°C (-40 to 185°F), cold start
requires min. of 100 VAC at -40°C
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Standards and Certifications
Safety: UL 60950-1
EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A
EMS:
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 35 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8
IEC 61000-4-11
Rail Traffic: EN 50155*, EN 50121-4
Note: Please check Moxa’s website for the most up-to-date certification status.
Transportation: NEMA TS2
Electrical Substation: IEC 61850-3, IEEE 1613
MTBF (mean time between failures)
Input Voltage:
• 24 VDC
• 48 VDC
• 110/220 VDC/VAC
Operating Voltage:
Time: 393,828 hrs
Standard: Telcordia SR332
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Dimensions
Unit: mm (inch)
Top View
325 (12.80)
349.3 (13.75)
Rear View
.3
Ø6
440 (17.32)
480 (18.90)
Side View
44 (1.73)
31.8
(1.25)
44 (1.73)
5)
37.9 (1.49)
0.2
(Ø
Front View
5.6 (0.22)
462.6 (18.21)
2
w w w. m o x a . c o m
Industry-specific Ethernet Switches
Ordering Information
Step 1: Select Ethernet switch system
Step 2: Select interface modules
PM-7200 module
PT-7828 with power supply
(Gigabit or Fast Ethernet)
Note: The PT-7828 Ethernet switch system is delivered without interface modules.
See the PM-7200/7500 Series datasheet to choose PM-7200 interface modules.
PT-7828 Layer 3 Modular Rackmount Ethernet Switch System
The PT-7828 switch system consists of 16 Layer 3 modular managed rackmount Ethernet switch systems, each with 3 slots for Fast Ethernet modules,
and 1 slot for a Gigabit Ethernet module. A total of 28 or 24+4G ports can be installed, and the switch can be used in temperatures ranging from -40 to
85°C.
Available Models
Front Cabling,
Front Display
Power Supply
Isolated Power Supply 1
Rear Cabling,
Front Display
Isolated Power Supply 2
24 VDC
48 VDC
HV: 110/220
VDC/VAC
24 VDC
48 VDC
HV: 110/220
VDC/VAC
PT-7828-F-24
PT-7828-R-24
1
–
–
–
–
–
PT-7828-F-24-24
PT-7828-R-24-24
1
–
–
1
–
–
PT-7828-F-24-HV
PT-7828-R-24-HV
1
–
–
–
–
1
PT-7828-F-48
PT-7828-R-48
–
1
–
–
–
–
PT-7828-F-48-48
PT-7828-R-48-48
–
1
–
–
1
–
PT-7828-F-48-HV
PT-7828-R-48-HV
–
1
–
–
–
1
PT-7828-F-HV
PT-7828-R-HV
–
–
1
–
–
–
PT-7828-F-HV-HV
PT-7828-R-HV-HV
–
–
1
–
–
1
Note: The PT-7828 Layer 3 Ethernet switch systems provide combinations of 1 slot for a Gigabit Ethernet interface module, 3 slots for Fast Ethernet interface modules. See
the PM-7200/7500 Series datasheet to select PM-7200 Gigabit Ethernet and Fast Ethernet interface modules for your own application.
PT-7828-R series
(Rear Cabling, Front Display)
PT-7828-F series
(Front Cabling, Front Display)
Gigabit/Fast Ethernet Modules for the PT-7828
PM-7200-4GTXSFP
PM-7200-2GTXSFP
PM-7200-1MSC
PM-7200-1MST
PM-7200-2MSC
PM-7200-2MST
PM-7200-2SSC
PM-7200-8TX
PM-7200-2MSC4TX
PM-7200-2MST4TX
PM-7200-2SSC4TX
PM-7200-4MSC2TX
PM-7200-4MST2TX
PM-7200-4SSC2TX
PM-7200-6MSC
PM-7200-6MST
PM-7200-6SSC
PM-7200-8SFP
PM-7200-4M12
PM-7200-8MTRJ
PM-7200-4TX-PTP
PM-7200-4MST-PTP
PM-7200-4MSC-PTP
PM-7200-1BNC2MST-PTP
Interface Modules
Slot 1
–
–
–
–
–
–
–













–
–
–
–
Slot 2
–
–
–
–
–
–
–













–
–
–
–
Slot 3
–
–
–
–
–
–
–













–
–
–
–
Slot 4


–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Optional Accessories (can be purchased separately)
MXview: Moxa industrial network management software with 50, 100, 250, 500, 1000, or 2000 nodes
EDS-SNMP OPC Server Pro: OPC server software that works with all SNMP devices
ABC-01 Series: Configuration backup and restoration tool for managed Ethernet switches, 0 to 60°C
operating temperature
3
Package Checklist
•
•
•
•
•
•
•
PT-7828 switch
Serial Cable: CN20070
Protective caps for unused ports
2 rackmount ears
Documentation and software CD
Hardware installation guide
Warranty card
w w w. m o x a . c o m
Industry-specific Ethernet Switches
PM-7200/7500 Series
Gigabit and Fast Ethernet modules for PT and IKS series rackmount Ethernet
switches
Specifications
Gigabit Ethernet Interface Modules, PM-7200/7500-2G/4G Series
Interface
PM-7200-4GTXSFP
PM-7200-2GTXSFP
PM-7200-4GTX-PHR-PTP
PM-7200-4GSFP-PHR-PTP
PM-7500-4GTXSFP
PM-7500-2GTXSFP
RJ45 Ports: 10/100/1000BaseT(X) auto
negotiation speed, and auto
MDI/MDI-X connection
Fiber Ports: 1000BaseSFP slots
Note: The PM-7200/7500-2G/4G series Gigabit
Ethernet combo modules support 2 or 4 SFP
slots. See the SFP-1G datasheet to select the
SFP-1G series Gigabit Ethernet modules for your
application.
Fast Ethernet Interface Modules, PM-7200/7500 Series
PM-7200-8TX
PM-7200-6MSC
PM-7200-6SSC
PM-7200-6MST
PM-7200-4MSC2TX
PM-7200-4SSC2TX
PM-7200-4MST2TX
PM-7200-2MSC4TX
PM-7200-2SSC4TX
PM-7200-2MST4TX
PM-7200-2MSC
PM-7200-2SSC
PM-7200-2MST
PM-7200-1MSC
PM-7200-1MST
PM-7200-8SFP*
PM-7200-4M12
PM-7200-8MTRJ
PM-7200-4TX-PTP
PM-7200-4MSC-PTP
PM-7200-4MST-PTP
PM-7200-1BNC2MST-PTP
PM-7500-4MSC
PM-7500-4SSC
PM-7500-2MSC
PM-7500-2SSC
PM-7500-2MST
PM-7500-4MST
*Note: See the SFP-1FE datasheet to select SFP-1FE series Fast Ethernet modules for your application.
4
w w w. m o x a . c o m
Industry-specific Ethernet Switches
Interface
RJ45 Ports: 10/100BaseT(X) auto negotiation speed, F/H duplex
mode, and auto MDI/MDI-X connection
Fiber Ports: 100BaseFX ports (SC/ST/MTRJ or SFP LC connector)
M12 Ports: 10/100BaseT(X) auto negotiation speed, and auto MDI/
MDI-X connection
BNC Ports: Time clock signal PPS (pulses per second) output for IEEE
1588 time synchronization
Ordering Information
Rackmount Ethernet Switch System and Interface Module Compatibility Chart
Modular Rackmount Ethernet Switch System:
PT-7828/PT-7728-PTP/
PT-7728
Slot 1
Slot 1
PT-7528-24TX
Slot 2
Slot 3
Slot 2
PT-7710
Slot 4
Slot 3
Slot 4
Slot 1
Slot 1
PM-7200-1BNC2MST-PTP
PM-7200-4GTX-PHR-PTP
PM-7200-4GSFP-PHR-PTP
PM-7200-2GTXSFP
PM-7500-2GTXSFP
PM-7500-4GTXSFP
PM-7200-1MSC/2MSC
PM-7200-1MST/2MST
PM-7200-2SSC
PM-7200-8TX
PM-7200-2MSC4TX
PM-7200-2MST4TX
PM-7200-2SSC4TX
PM-7200-4MSC2TX
PM-7200-4MST2TX
PM-7200-4SSC2TX
PM-7200-6MSC
PM-7200-6MST
PM-7200-6SSC
PM-7200-8SFP*
PM-7200-4M12
PM-7200-8MTRJ
PM-7500-2MSC/4MSC
PM-7500-2MST/4MST
PM-7500-2SSC/4SSC
Slots 1 to 3
–
–
–
–
–
–
–
–
–
–
–
–
–
P
P
P
P
P
P
P
P
P
P
P
P
P
–
–
–
Slot 4
–
–
–
–
–
–
P
P
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Slots 1 to 3
P
P
P
–
–
–
–
–
–
–
–
–
–
P
P
P
P
P
P
P
P
P
P
P
P
P
–
–
–
PM-7200-4GTXSFP
PM-7200-4MST-PTP
Interface Modules
PM-7200-4MSC-PTP
PT-7728-PTP
Slot 2
PM-7200-4TX-PTP
IEEE 1588 Interface Modules
PT-7828
PT-7728
Slot 2
Slot 1
Slot 4
–
–
–
P
P
P
P
P
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
PT-7528-24TX Slot 1
–
–
–
–
–
–
–
–
P
P
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
P
P
P
Slot 1
–
–
–
–
–
–
–
–
–
–
–
–
–
P
P
P
P
P
P
P
P
P
P
P
P
P
–
–
–
Slot 2
–
–
–
–
–
–
–
P
–
–
P
P
P
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
PT-7710
*Note: See the SFP-1FE datasheet to select SFP-1FE series Fast Ethernet modules for your application.
Gigabit Ethernet Modules, PM-7200/7500-2G/4G Series
Port Interface
Available Models
Combo Port, 10/100/1000BaseT(X) or 1000BaseSFP*
PM-7200-2GTXSFP
2
PM-7200-4GTXSFP
4
PM-7500-2GTXSFP
2
PM-7500-4GTXSFP
4
*The PM-7200/7500-2G/4G series Gigabit Ethernet combo modules support 2 or 4 SFP slots.
Gigabit PRP/HSR Ethernet Modules, PM-7200-PHR-PTP Series:
Available Mode
Port Interface
10/100/1000BaseT(X)
5
100/1000BaseSFP
PM-7200-4GTX-PHR-PTP
4
–
PM-7200-4GSFP-PHR-PTP
–
4
w w w. m o x a . c o m
Industry-specific Ethernet Switches
Fast Ethernet Modules, PM-7200/7500 Series
Port Interface
10/100BaseT(X)
Available Models
10BaseFX
Multi-mode,
100BaseFX
Multi-mode,
Multi-mode,
Multi-mode,
Single-mode,
BNC
M12
PM-7200-8TX
8
–
–
–
–
–
–
–
–
–
PM-7200-6MSC
–
–
–
6
–
–
–
–
–
–
PM-7200-6MST
–
–
–
–
6
–
–
–
–
–
PM-7200-6SSC
–
–
–
–
–
–
6
–
–
–
PM-7200-4MSC2TX
2
–
–
4
–
–
–
–
–
–
PM-7200-4MST2TX
2
–
–
–
4
–
–
–
–
–
PM-7200-4SSC2TX
2
–
–
–
–
–
4
–
–
–
PM-7200-2MSC4TX
4
–
–
2
–
–
–
–
–
–
PM-7200-2MST4TX
4
–
–
–
2
–
–
–
–
–
PM-7200-2SSC4TX
4
–
–
–
–
–
2
–
–
–
PM-7200-2MSC
–
–
–
2
–
–
–
–
–
–
PM-7200-2MST
–
–
–
–
2
–
–
–
–
–
PM-7200-2SSC
–
–
–
–
–
–
2
–
–
–
PM-7200-1MSC
–
–
–
1
–
–
–
–
–
–
PM-7200-1MST
–
–
–
–
1
–
–
–
–
–
PM-7200-8SFP*
–
–
–
–
–
–
–
–
8
–
PM-7200-4M12
–
4
–
–
–
–
–
–
–
–
PM-7200-8MTRJ
–
–
–
–
–
8
–
–
–
–
PM-7200-4TX-PTP
4
–
–
–
–
–
–
–
–
–
PM-7200-4MSC-PTP
–
–
–
4
–
–
–
–
–
–
PM-7200-4MST-PTP
–
–
–
–
4
–
–
–
–
–
PM-7200-1BNC2MST-PTP
–
–
–
–
2
–
–
–
–
1
PM-7500-2MSC
–
–
–
2
–
–
–
–
–
–
PM-7500-2MST
–
–
–
–
2
–
–
–
–
–
PM-7500-2SSC
–
–
–
–
–
–
2
–
–
–
PM-7500-4MSC
–
–
–
4
–
–
–
–
–
–
PM-7500-4MST
–
–
–
–
4
–
–
–
–
–
PM-7500-4SSC
–
–
–
–
–
–
4
–
–
–
Connector
SC Connector
SC Connector,
PPS output,
100BaseSFP
TP
ST Connector SC Connector ST Connector
MTRJ
Single-mode,
connector
80 km
*Note: See the SFP-1FE datasheet to select SFP-1FE series Fast Ethernet modules for your application.
Package Checklist
• PM-7200/7500 interface modules
• Warranty card
6
w w w. m o x a . c o m
Industry-specific Ethernet Switches
SFP-1G Series
1-port Gigabit Ethernet SFP modules
››Digital Diagnostic Monitor Function
››-40 to 85°C operating temperature range (T models)
››IEEE 802.3z compliant
››Differential LVPECL inputs and outputs
››TTL signal detect indicator
››Hot pluggable LC duplex connector
››Class 1 laser product, complies with EN 60825-1
EN : 60825
Specifications
Interface
Ethernet Ports: 1
Connectors: Duplex LC Connector or Simplex LC Connector (WDM-type only)
Optical Fiber
SFP-SX
Multi-Mode
OM1
OM2
300 m
550 m
850
Gigabit Ethernet SFP
SFP-LX
SFP-LH
SFP-LHX
Single-Mode Single-Mode Single-Mode
G.652
G.652
G.652
10 km
30 km
40 km
1310
1310
1310
SFP-ZX
SFP-EZX
SFP-EZX-120
Transceiver Type
Single-Mode Single-Mode Single-Mode
Fiber Cable Type
G.652
G.652
G.652
Typical Distance
80 km
110 km
120 km
Typical (nm)
1550
1550
1550
TX Range
Wave830 to 860
1270 to 1355
1280 to 1355 1280 to 1355 1280 to 1340 1530 to 1570 1530 to 1570 1530 to 1570
(nm)
length
RX Range
770 to 860
1260 to 1610
1260 to 1610 1260 to 1610 1260 to 1610 1260 to 1610 1260 to 1610 1100 to 1600
(nm)
TX Range
-4 to -9.5
-1 to -9
-3 to -9
-3 to -8
+3 to -4
+5 to 0
+5 to 0
+3 to -2
(dBm)
RX Range
0 to -18
-1 to -19
-3 to -21
-3 to -23
-1 to -24
-1 to -24
-9 to -30
-8 to -33
(dBm)
Optical
Power
Link Budget
8.5
10
12
15
20
24
30
31
(dB)
Dispersion
4.3
3.6
5
5
1
1
1
1
1
2
Penalty (dB)
Note: When connecting the SFP-LHX, ZX, EZX, or EZX-120, we recommened using an attenuator to prevent the transceiver from being damaged by excessive optical power.
SFP-10A
SFP-LSX
Multi-Mode
OM2
OM1
1 km
2 km
1310
SFP-10B
WDM Gigabit Ethernet SFP
SFP-20A
SFP-20B
Single-Mode
G.652
20 km
TX 1310, RX 1550
TX 1550, RX 1310
SFP-40A
SFP-40B
Transceiver Type
Single-Mode
Single-Mode
Fiber Cable Type
G.652
G.652
Typical Distance
10 km
40 km
Typical (nm)
TX 1310, RX 1550
TX 1550, RX 1310
TX 1310, RX 1550
TX 1550, RX 1310
TX Range
Wave1270 to 1355
1530 to 1570
1270 to 1355
1530 to 1570
1290 to 1330
1530 to 1570
(nm)
length
RX Range
1480 to 1580
1260 to 1360
1480 to 1580
1260 to 1360
1480 to 1580
1260 to 1360
(nm)
TX Range
-3 to -9
-2 to -8
+2 to -3
(dBm)
RX Range
-3 to -21
-2 to -23
-1 to -23
(dBm)
Optical
Power
Link Budget
12
15
20
(dB)
Dispersion
2
3
1
Penalty (dB)
Note: WDM-type SFP modules must be used in pairs (e.g., SFP-1G10ALC and SFP-1G10BLC)
Note: When connecting the SFP-40A and 40B, we recommend using an attenuator to prevent damage caused by excessive optical power.
Typical Distance: To reach the typical distance of specified fiber transceiver, please refer to formula: Link budget(dB) > dispersion penalty(dB) + total
link loss(dB).
7
w w w. m o x a . c o m
Industry-specific Ethernet Switches
Power Requirements
Warranty
Power Consumption: Max. 1 W
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Environmental Limits
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Standards and Certifications
Safety: CE, FCC, TÜV (EN 60825), UL 60950-1
Marine: DNV, GL
Dimensions
Unit: mm (inch)
SFP-1G Series
SFP-1G Series (WDM Type)
13.4 (0.5)
13.4 (0.5)
Top View
Top View
55.5 (2.2)
6.3 (0.2)
56.6 (2.2)
13.4 (0.5)
11.28 (0.4)
55.5 (2.2)
8.15
(0.3)
8.4 (0.3)
13.4 (0.5)
8.2
(0.3)
8.4 (0.3)
45.0 (1.8)
2.6 (0.1)
8.0 (0.3)
Rear View
Rear View
13.7 (0.5)
14.0 (0.6)
Side View
13.7 (0.5)
14.0 (0.6)
Side View
Ordering Information
Gigabit Ethernet SFP Models
Standard Temperature
Wide Temperature
Models (0 to 60˚C)
Models (-40 to 85˚C)
Transeiver Type
WDM Gigabit Ethernet SFP Models
Typical Distance
Wide
Standard
Temperature
(0 to 60˚C)
Temperature
Transeiver Type
Typical Distance
(-40 to 85˚C)
SFP-1GSXLC
SFP-1GSXLC-T*
Multi-Mode
300/550 m
SFP-1G10ALC
SFP-1G10ALC-T
Single-Mode
10 km
SFP-1GLSXLC
SFP-1GLSXLC-T
Multi-Mode
1/2 km
SFP-1G10BLC
SFP-1G10BLC-T
Single-Mode
10 km
SFP-1GLXLC
SFP-1GLXLC-T
Single-Mode
10 km
SFP-1G20ALC
SFP-1G20ALC-T
Single-Mode
20 km
SFP-1GLHLC
SFP-1GLHLC-T
Single-Mode
30 km
SFP-1G20BLC
SFP-1G20BLC-T
Single-Mode
20 km
SFP-1GLHXLC
SFP-1GLHXLC-T
Single-Mode
40 km
SFP-1G40ALC
SFP-1G40ALC-T
Single-Mode
40 km
SFP-1GZXLC
SFP-1GZXLC-T
Single-Mode
80 km
SFP-1G40BLC
SFP-1G40BLC-T
Single-Mode
40 km
SFP-1GEZXLC
–
Single-Mode
110 km
–
–
–
–
SFP-1GEZXLC-120
–
Single-Mode
120 km
–
–
–
–
*SFP-1GSXLC-T: -20 to 75˚C operating temperature
Package Checklist
• SFP-1G module
• Warranty card
8
w w w. m o x a . c o m
Industry-specific Ethernet Switches
SFP-1FE Series
1-port Fast Ethernet SFP modules
››Digital Diagnostic Monitor Function
››IEEE 802.3u compliant
››Differential PECL inputs and outputs
››TTL signal detect indicator
››Hot pluggable LC duplex connector
››Class 1 laser product; complies with EN 60825-1
EN : 60825
Specifications
Interface
Operating Temperature: -40 to 85°C (-40 to 185°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Ethernet Ports: 1
Connectors: Duplex LC Connector
Standards and Certifications
Optical Fiber
Fast Ethernet SFP
SFP-M
SFP-S
SFP-L
Multi-Mode
Single-Mode
Transceiver Type
Fiber Cable Type
OM1/OM2
62.5/125,
50/125 μm
800
MHz*km
G.652
G.652
Dimensions
Unit: mm (inch)
Top View
13.4 (0.5)
45.0 (1.8)
55.5 (2.2)
6.3 (0.2)
56.6 (2.2)
Side View
13.7 (0.5)
14.0 (0.6)
Power Consumption: Max. 1 W
Warranty Period: 5 years
Details: See www.moxa.com/warranty
8.2
(0.3)
8.4 (0.3)
Power Requirements
Warranty
13.4 (0.5)
Typical Distance
2 km
4 km
40 km
80 km
Typical
1310
1310
1550
(nm)
WaveTX Range
1280
to
1530
to
1280 to 1340
length
(nm)
1340
1570
RX Range
1100 to
1100 to
1100 to 1650
(nm)
1600
1600
TX Range
-8
to
-18
0
to
-5
0
to -5
(dBm)
RX Range
-3 to -32
-3 to -34
-3 to -34
(dBm)
Optical
Link
Power
Budget
14
29
29
(dB)
Dispersion
Penalty
2
3
1
1
(dB)
Note: When connecting the SFP-S or L, we recommend using an attenuator to
prevent damage caused by excessive optical power.
Safety: CE, FCC, TÜV, UL 60950-1
Marine: DNV, GL
Rear View
Environmental Limits
Ordering Information
Available Models
Wide Temperature
(-40 to 85˚C)
SFP-1FEMLC-T
SFP-1FESLC-T
SFP-1FELLC-T
100BaseFX, Multi-Mode,
Port Interface
100BaseFX, Single-Mode,
100BaseFX, Single-Mode,
LC Connector, 4 km
1
–
–
LC Connector, 40 km
–
1
–
LC Connector, 80 km
–
–
1
Package Checklist
• SFP-1FE module
• Warranty card
9
© Moxa Inc. All rights reserved. Updated May. 11, 2016. Specifications subject to change without notice. Please visit our website for the most up-to-date product information.
Download PDF
Similar pages