DJ Controller
DDJ-1000
pioneerdj.com/support/
rekordbox.com
For FAQs and other support information for this product, visit the above site.
Operating Instructions (Quick Start Guide)
Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After
you have finished reading the instructions, put them away in a safe place for future reference.
In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings.
However the method of connecting and operating the unit is the same.
IMPORTANT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
D3-4-2-1-1b_A1_En
1)
2)
3)
4)
5)
6)
7)
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s
instructions.
8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9) Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or the third
prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
WARNING
This equipment is not waterproof. To prevent a fire or
shock hazard, do not place any container filled with
liquid near this equipment (such as a vase or flower
pot) or expose it to dripping, splashing, rain or
moisture.
D3-4-2-1-3_A1_En
WARNING
To prevent a fire hazard, do not place any naked flame
sources (such as a lighted candle) on the equipment.
D3-4-2-1-7a_A1_En
The graphical symbol
placed on the product
means alternating current.
The graphical symbol
placed on the product
means direct current.
The graphical symbol
placed on the product
means Class II equipment.
D3-8-2-4_A1_En
2
En
11) Only use attachments/accessories specified by
the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13) Unplug this apparatus during lightning storms
or when unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
D3-7-13-69_En
CAUTION
The  switch on this unit will not completely shut off all
power from the AC outlet. Since the power cord serves
as the main disconnect device for the unit, you will need
to unplug it from the AC outlet to shut down all power.
Therefore, make sure the unit has been installed so that
the power cord can be easily unplugged from the AC
outlet in case of an accident. To avoid fire hazard, the
power cord should also be unplugged from the AC outlet
when left unused for a long period of time (for example,
when on vacation).
D3-4-2-2-2a*_A1_En
Operating Environment
Operating environment temperature and humidity:
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in
locations exposed to high humidity or direct sunlight (or
strong artificial light).
D3-4-2-1-7c*_A2_En
When using this product, confirm the safety
information shown on the bottom of the unit.
IMPORTANT NOTICE
D3-4-2-2-4_B1_En
The Safety of Your Ears is in Your Hands
Get the most out of your equipment by playing it at a safe
level – a level that lets the sound come through clearly
without annoying blaring or distortion and, most
importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time, your hearing “comfort
level” adapts to higher volumes of sound, so what sounds
“normal” can actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe level
BEFORE your hearing adapts.
ESTABLISH A SAFE LEVEL:
• Set your volume control at a low setting.
• Slowly increase the sound until you can hear it
comfortably and clearly, without distortion.
• Once you have established a comfortable sound level,
set the dial and leave it there.
BE SURE TO OBSERVE THE FOLLOWING
GUIDELINES:
• Do not turn up the volume so high that you can’t hear
what’s around you.
• Use caution or temporarily discontinue use in potentially
hazardous situations.
• Do not use headphones while operating a motorized
vehicle; the use of headphones may create a traffic
hazard and is illegal in many areas.
S001a_A1_En
Information to User
Alterations or modifications carried out without
appropriate authorization may invalidate the user’s right
to operate the equipment.
D8-10-2_A1_En
WARNING
THE MODEL NUMBER AND SERIAL NUMBER OF THIS
EQUIPMENT ARE ON THE REAR OR BOTTOM.
RECORD THESE NUMBERS ON PAGE 19 FOR FUTURE
REFERENCE.
D36-AP9-3*_A1_En
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power cord
when your hands are wet as this could cause a short
circuit or electric shock. Do not place the unit, a piece of
furniture, etc., on the power cord, or pinch the cord. Never
make a knot in the cord or tie it with other cords. The
power cords should be routed such that they are not likely
to be stepped on. A damaged power cord can cause a fire
or give you an electrical shock. Check the power cord once
in a while. When you find it damaged, ask your nearest
service center or your dealer for a replacement.
S002*_A1_En
[Supplied power cord]
The supplied power cord is designed specifically for
120 V. Do not use it with a voltage other than 120 V.
Doing so may cause a fire or electric shock.
D3-7-14_PDJ_A1_En
CAUTION
This product is evaluated in moderate climate
condition.
D3-8-2-1-7b_A1_En
VENTILATION CAUTION
When installing this unit, make sure to leave space
around the unit for ventilation to improve heat radiation
(at least 5 cm at rear, and 5 cm at each side).
D3-4-2-1-7d*_A1_En
Store small parts out of the reach of children and
infants. If accidentally swallowed, contact a doctor
immediately.
D41-6-4_A1_En
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
D8-10-1-2_A1_En
FEDERAL COMMUNICATIONS COMMISSION DECLARATION OF CONFORMITY
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
Product Name: DJ Controller
Model Number: DDJ-1000
Responsible Party Name: PIONEER ELECTRONICS (USA) INC.
SERVICE SUPPORT DIVISION
Address: 1925 E. DOMINGUEZ ST. LONG BEACH, CA 90810-1003, U.S.A.
Phone: 1-800-421-1404
D8-10-4*_C1_En
URL: http://www.pioneerelectronics.com
En
3
Before start
How to read this manual
! Thank you for purchasing this Pioneer DJ product.
This manual provides brief descriptions of the connection between
the unit and your computer, and the audio output. For more instructions on how to use this product, refer to the Operating Instructions
for this product.
Read this manual and the Operating Instructions before using the
product. Both contain important information that you should understand to properly use the product.
! In this manual, names of buttons and terminals, menus of this product and your computer, etc., are enclosed in square brackets ([ ])
(e.g. [File], [CUE] button, [PHONES] output terminal).
! Screens, external appearance, and software and hardware specifications described in this manual are based on the product that is still
under development and may differ from the final specifications.
! Depending on your operating system, the web browser settings,
etc., the procedures described in this manual may differ from actual
operations.
Features
This unit is an all-in-one DJ controller designed specifically for rekordbox dj. Its interfaces incorporating various controls such as “BIG JOG”,
“PERFORMANCE PADS”, and “4-CHANNEL MIXER” are positioned with
room to spare to allow for more individualistic DJ performances using
rekordbox dj. Also, numerous input and output terminals support a variety of DJ styles, and the design makes the unit look high quality, which is
appropriate in a variety of scenes such as nightclubs and home parties.
Accessories
!
!
!
!
!
1
AC adapter
Power cord
USB cable1
Operating Instructions (Quick Start Guide) (this document)
rekordbox dj license key card
One USB cable is included with this unit.
To connect two units, separately prepare a cable that conforms to
the USB 2.0 standard.
Cautions
The license key cannot be reissued. Be careful not to lose it.
4
En
Viewing the manuals
Viewing the Operating Instructions for
this unit
1 Launch a web browser on a computer and access the
following Pioneer DJ site.
pioneerdj.com
2 Click [Support].
3 Click [Tutorials, manuals & documentation].
4 Click [DDJ-1000] in the [DJ CONTROLLER] category.
5 Click the desired language from the Operating
Instructions list.
Download the manual as necessary.
Viewing the rekordbox introduction
1 Launch a web browser on the computer and access
the site below.
rekordbox.com/manual
2 Click the required language of the rekordbox
introduction.
Preparing rekordbox
!rekordbox
rekordbox is music management software for DJs to prepare tracks
and perform DJ play.
! rekordbox dj
The DJ performance functions of rekordbox are called rekordbox dj.
Enter the license key on the rekordbox dj license key card included
with this product to use rekordbox dj.
Install the software by following the procedure below when you use
rekordbox for the first time or if you are using rekordbox 4.x or an earlier
version.
If you have already installed rekordbox Ver. 5.x, update it to the latest
version from rekordbox Update Manager. In this case, the following
installation procedure is not required. For details on the update procedure, access the site below and see “ rekordbox Introduction”.
rekordbox.com/manual
Operating environment
Supported
operating systems
Mac: macOS High
Sierra 10.13/Sierra
10.12 (latest update),
OS X 10.11/10.10 (latest
update)
Windows: 32-bit version or 64-bit version of
Windows 10, Windows
8.1, or Windows 7 (latest
service pack)
CPU and required memory
Intel® processor Core™ i7, i5, i3
Intel® processor Core™ 2 Duo 2.0 GHz or better
4 GB or more of RAM
®
Intel processor Core™ i7, i5, i3
Intel® processor Core™ 2 Duo 2.0 GHz or better
4 GB or more of RAM
Installing rekordbox
1 Launch a web browser on the computer and
download rekordbox from the site below.
rekordbox.com/download
When downloading a Windows version, select either the 32-bit version or
64-bit version to match your computer.
2 Double-click the downloaded file to unzip it.
3 Double-click the unzipped file to launch the installer.
Others
USB port
A USB 2.0 port is required to connect a computer to
this unit.
Display resolution
1 280 x 768 or greater
Internet connection
An Internet connection is required for registering the
rekordbox user account and downloading the software.
!
Before start
rekordbox
For information on the latest system requirements, compatibility, and supported
operating systems of rekordbox, see the site below.
rekordbox.com/system
! Operation on all computers is not guaranteed, even if the computers meet the
required operating environment.
! The CPU and hard disc may not provide sufficient processing capabilities
depending on the power-saving setting, etc. on the computer. Confirm that
the computer meets the conditions to provide constant high-performance (for
example, connecting the computer to a power outlet to maintain a stable power
supply) especially when using rekordbox on a laptop.
! A separate contract with an Internet service provider and payment of the utilization fee are required to access the Internet.
! Use the latest version/service pack of the operating system.
4 Carefully read the Software End User License
Agreement, and proceed with the installation by
following the instructions on the screen if you agree to
the terms.
! If you do not agree to the license agreement, cancel the
installation.
5 When the installation completion screen appears,
close the installer by following the instructions on the
screen.
The installation is completed.
En
5
Part names
For details on the buttons and controls, see Part names and functions in the Operating Instructions.
1Browser section
3Mixer section
2Deck sections
Browser section
1
2
1Rotary selector
2BACK button
3VIEW button
6
En
3
Deck sections
4
1Jog dial display section
mDECK selector button
2Jog dial
nSLIP REVERSE button
3QUANTIZE button
oLOOP IN, LOOP 1/2X button
4SLIP button
pLOOP OUT, LOOP 2X button
5JOG FEELING ADJUST control
q4 BEAT LOOP/EXIT button
Part names
The deck sections are used to control the four decks. The buttons and controls for operating decks 1 and 3 are located on the left side of the controller,
and those for operating decks 2 and 4 are located on the right side of the controller.
6BEAT SYNC button
7MASTER TEMPO button
8TEMPO slider
9HOT CUE mode button
aPAD FX1 mode button
bBEAT JUMP mode button
cSAMPLER mode button
dPAGE c, d button
eKEY SYNC button
fKEY RESET button
gPerformance pads
hPLAY/PAUSE f button
iCUE button
jSEARCH m, n buttons
kMEMORY button
lSHIFT button
En
7
Mixer section
4
4
r
s
t
v
1Microphone indicator
nMIC1 LEVEL control
2OFF, ON, TALK OVER selector switch
oChannel level indicator
3USB A, PHONO/LINE, USB B selector switch
pTRIM control
4USB A, LINE, USB B selector switch
qEQ (HI, MID, LOW) control
5MASTER LEVEL control
rCOLOR control
6CLIP indicator
sHeadphones CUE button
7Master level indicator
tChannel fader
8BOOTH MONITOR LEVEL control
uCrossfader assign selector switch
9MASTER CUE button
vCrossfader
aEffect section display
bBEAT c, d buttons
cBEAT FX SELECT control
dBEAT FX CH SELECT control
eBEAT FX LEVEL/DEPTH control
fBEAT FX ON/OFF button
gHEADPHONES LEVEL control
hHEADPHONES MIXING control
iSAMPLER VOL control
jSAMPLER CUE button
kSOUND COLOR FX SELECT buttons
lMIC EQ (HI, LOW)controls
mMIC2 LEVEL control
8
u
En
Rear panel
2
3
4
5 6 7
8
7 6
9
a
1Kensington security slot
9USB terminals (USB B)
2MASTER 1 output terminal
aUSB terminals (USB A)
3MASTER 2 output terminal
bMIC2 input terminals
4BOOTH output terminals
cMIC1 input terminals
5SIGNAL GND terminal
du switch
b
c
d
Part names
1
e
This switch is used to switch between standby and on.
6LINE/PHONO switch
eDC IN terminal
7LINE/PHONO input terminals
fDC cord hook
8LINE input terminals
Front panel
1
1PHONES output terminals
En
9
Operation
!
!
!
!
Connect the power cord to a power outlet after all the connections are completed.
Turn off this unit and disconnect the power cord from the power outlet before connecting components or changing the connections.
Refer to the operating instructions for the components to be connected.
Be sure to use the included power cord and AC adapter.
Be sure to use the USB cable included with this product or one that conforms to USB 2.0.
Do not use a USB hub.
Example of connections
Connecting input terminals
Rear panel
*1 Analog player
*2 DJ player
DJ player
AUDIO OUT
R
L
Portable audio
device
To power outlet
CONTR
Power cord
㸦included㸧
AC adapter
(included)
R
L
R
R
Portable audio
device
DJ player
*1 Analog player
L
L
R
L
*2 DJ player
Computer
! *1 When connecting an analog player, switch the [LINE/PHONO] switch beside the terminals to [PHONO].
*2 When connecting a DJ player, switch the [LINE/PHONO] switch beside the terminals to [LINE].
10
En
Microphone
Connecting output terminals
Rear panel
R
Operation
Component, amplifier,
powered speaker, etc.
L
Power amplifier,
powered speakers, etc.
Power amplifier
(for booth monitor),
powered speakers, etc.
Front panel
Headphones
1 Be sure to use the [MASTER 1] output terminals for a balanced
output. If they are connected to an unbalanced input (such as RCA)
using an XLR to RCA converter cable (or converter adapter), etc., the
sound quality may be lowered or noise may occur.
For connection with an unbalanced input (such as RCA), use the
[MASTER 2] output terminals.
2 Be careful not to accidentally insert the power cord plug of
another unit into a [MASTER 1] output terminals.
Do not connect terminals capable of supplying phantom power
to the [MASTER 1] output terminals.
3 Be sure to use the [BOOTH] output terminals for a balanced output.
If they are connected to an unbalanced input (such as an RCA or TS
terminal) with an TRS to RCA converter cable (or converter adapter),
TS cable, etc., the sound quality may be lowered or noise may occur.
En
11
Connections
For more information on how to use this product with rekordbox dj,
refer to this product's Operating Instructions that is available on the
Pioneer DJ site.
5 Connect the AC adapter.
To power outlet
1 Connect headphones to the [PHONES] output
terminals.
Power cord
㸦included㸧
AC adapter
(included)
2 Connect devices such as powered speakers, a power
amplifier, and components to the [MASTER 1] or
[MASTER 2] output terminals.
Powered speakers, etc.
! To output the sound from the [BOOTH] output terminals, connect devices such as speakers to the [BOOTH] output terminals.
3 Connect this unit to your computer using a USB cable.
USB cable
㸦included㸧
4 Turn the computer on.
12
En
6 Press the [u] switch on the rear panel of this unit to
turn this unit on.
This unit turns on.
! For Windows
[Installing device driver software] may appear when this unit
is connected to the computer for the first time or connected to a
different USB port on the computer. Wait for a while until [Your
devices are ready for use] appears.
7 Turn on the devices connected to the output
terminals (powered speakers, power amplifier,
components, etc.).
! If a microphone, DJ player or other external device is connected
to the input terminals, turn on the connected device.
Starting the system
Loading tracks into a deck
The following describes the procedure for loading tracks into deck 1 (left
side) as an example.
Launching rekordbox
Operation
1
Account registration and activation work for rekordbox dj are required at
first startup. For details on each work procedure, access the site below
and see “rekordbox Introduction”.
rekordbox.com/manual
For Mac
Open the [Applications] folder in Finder, and double-click the [rekordbox] icon.
For Windows 10
From the [Start] menu, click [Pioneer] > [rekordbox] icon.
For Windows 8.1
1Rotary selector
Click the [rekordbox] icon in [Apps view].
% Turn the rotary selector of deck 1 (left side) to select a
track in [Collection] and then press the rotary selector.
For Windows 7
Click the [Start] menu > [All Programs] > [Pioneer] > [rekordbox
X.X.X] > the [rekordbox] icon in order.
The track is loaded into deck 1.
Checking audio settings
Check that the [Audio] settings in [Preferences] of rekordbox are set as
follows.
For Mac
[Audio]: [DDJ-1000]
[Output channels]:
[Master Output]: [DDJ-1000: MASTER]
[Headphones Output]: [DDJ-1000: HEADPHONE]
For Windows
[Audio]: [DDJ-1000 ASIO]
[Output channels]:
[Master Output]: [DDJ-1000 ASIO: MASTER]
[Headphones Output]: [DDJ-1000 ASIO:HEADPHONE]
! If PC MASTER OUT is enabled, the “+ Name of audio device in
computer” information will also be displayed after [MASTER] of the
[Master Output] item in the [Audio] settings.
Adding music files to [Collection]
A list of track files managed by rekordbox is displayed on the
[Collection] screen.
Register the track files on the computer as the collection of music for
rekordbox and analyze them to enable those tracks to be used with
rekordbox.
1 Click [Collection] in the tree view.
A list of the tracks registered in [Collection] is displayed.
2 Open Finder or Windows Explorer, and drag and drop
track files or folders containing track files to the track
list.
The track files are added to [Collection], and the waveform analysis
of the track files starts. Wait until the analysis of all the track files is
finished.
En
13
2 Press the [PLAY/PAUSE f] button to play the track.
Playing a music file
The following describes the procedure for outputting the sound of deck 1
(left side) as an example.
3 Rotate the [TRIM] control.
Adjust the [TRIM] control to confirm that the channel level indicator
lights up in orange at the highest volume.
4 Move the channel fader forward.
5 Rotate the [MASTER LEVEL] control to adjust the
sound level of the speakers.
4
Adjust the level of the sound output from the [MASTER 1] and
[MASTER 2] output terminals to an appropriate level.
! To output sound from the computer’s speaker, adjust the volume of the computer’s speaker instead of the [MASTER LEVEL]
control.
Monitoring sound with headphones
Set the following as specified.
1USB A, LINE, USB B selector switch
Part
Operation
HEADPHONES MIXING control
Center position
HEADPHONES LEVEL control
Rotate it clockwise until it
stops.
2TRIM control
1 Press the headphones [CUE] button for channel 1.
3EQ (HI, MID, LOW) control
2 Rotate the [HEADPHONES LEVEL] control.
4Headphones CUE button
Adjust the level of sound output from the headphones to an appropriate
level.
5Channel fader
6HEADPHONES MIXING control
Note
7HEADPHONES LEVEL control
8Crossfader assign selector switch
9Crossfader
aMASTER LEVEL control
bBOOTH MONITOR LEVEL control
1 Set the following as specified.
Part
Operation
USB A, LINE, USB B selector switch
USB A
TRIM control
Rotate it clockwise until it
stops.
EQ (HI, MID, LOW) control
Center position
COLOR control
Center position
Channel fader
Move it forward.
MASTER LEVEL control
Rotate it clockwise until it
stops.
Crossfader
Center position
Crossfader assign selector switch
[THRU] position
En
Turning off the system
1 Close rekordbox.
cMASTER CUE button
14
This unit and rekordbox dj include many functions to allow for more
individualistic DJ performances. For details on each function, access the
site below and see the “rekordbox Manual”.
rekordbox.com/manual
2 Press the [u] switch on the rear panel of this unit to
set the unit to standby.
3 Disconnect the USB cable from the computer.
Additional information
Changing the settings
! For details on changing the settings of this unit, see Changing the
settings in the Operating Instructions.
! If you think that there is something wrong with this unit, check
the items in the “Troubleshooting” section of this unit’s operating
instructions and access the Pioneer DJ support site and check
[FAQ].
pioneerdj.com/support/
Some problems occur due to the connected components. If the problem cannot be resolved after checking the connected components,
contact the service center or your dealer for repairs.
! This unit may not operate properly due to static electricity or other
external influences. In such cases, disconnect the power cord, wait
for approximately one minute, and connect it again to restore normal
operation.
! Pioneer DJ is a trademark of the PIONEER CORPORATION and is
used under license. rekordbox and KUVO are trademarks or registered trademarks of the Pioneer DJ Corporation.
! rekordbox is a trademark or registered trademark of the Pioneer DJ
Corporation.
! Windows is a registered trademark of Microsoft Corporation in the
United States and other countries.
! Mac, macOS, OS X, and Finder are trademarks of Apple Inc., registered in the U.S. and other countries.
! Intel and Intel Core are trademarks of Intel Corporation in the U.S.
and/or other countries.
The names of companies and products mentioned herein are trademarks or registered trademarks of their respective owners.
Additional information
Troubleshooting
Trademarks and registered
trademarks
Cautions on copyrights
rekordbox restricts playback and duplication of copyright-protected
music contents.
! When coded data, etc., for protecting the copyright is embedded in
the music contents, it may not be possible to operate the program
normally.
! When rekordbox detects that coded data, etc., for protecting the
copyright is embedded in the music contents, processing (playback,
reading, etc.) may stop.
Recordings you have made are for your personal enjoyment and according to copyright laws may not be used without the consent of the copyright holder.
! Music recorded from CDs, etc., is protected by the copyright laws of
individual countries and by international treaties. It is the full responsibility of the person who has recorded the music to ensure that it is
used legally.
! When handling music downloaded from the Internet, etc., it is the
full responsibility of the person who has downloaded the music to
ensure that it is used in accordance with the contract concluded
with the download site.
En
15
Specifications
AC adapter
Power requirements..............................................................AC 120 V, 60 Hz
Rated current.......................................................................................... 0.9 A
Rated output................................................................................ DC 12 V, 3 A
Power consumption (standby).............................................................. 0.4 W
General – Main Unit
Power consumption.......................................................... DC 12 V, 2 000 mA
Main unit weight......................................................................6.0 kg (13.4 lb)
Max. external dimensions..... 708 mm (W) × 73.4 mm (H) × 361.4 mm (D)
(27.9 in. (W) × 2.9 in. (H) × 14.2 in. (D))
Tolerable operating temperature.......... +5 °C to +35 °C (+41 °F to +95 °F)
Tolerable operating humidity....................... 5 % to 85 % (no condensation)
Audio Section
Sampling rate.....................................................................................44.1 kHz
D/A converter..........................................................................................32-bit
A/D converter..........................................................................................24-bit
Frequency characteristic
USB, LINE, MIC1, MIC2................................................... 20 Hz to 20 kHz
S/N ratio (rated output, A-WEIGHTED)
USB................................................................................................. 112 dB
LINE.................................................................................................. 96 dB
PHONO............................................................................................ 85 dB
MIC1................................................................................................. 80 dB
MIC2................................................................................................. 80 dB
Total harmonic distortion (20 Hz to 20 kHzBW)
USB................................................................................................0.002 %
LINE...............................................................................................0.005 %
Standard input level / Input impedance
LINE................................................................................... –12 dBu/47 kW
PHONO............................................................................. –52 dBu/47 kW
MIC1................................................................................. –57 dBu/3.3 kW
MIC2................................................................................. –57 dBu/3.3 kW
Standard output level / Load impedance / Output impedance
MASTER 1...................................................+6 dBu/10 kW/330 W or less
MASTER 2...................................................+2 dBu/10 kW/680 W or less
BOOTH........................................................+6 dBu/10 kW/330 W or less
PHONES..........................................................+8 dBu/32 W/10 W or less
Rated output level / Load impedance
MASTER 1........................................................................... 25 dBu/10 kW
MASTER 2........................................................................... 21 dBu/10 kW
BOOTH................................................................................ 25 dBu/10 kW
Crosstalk
LINE.................................................................................................. 82 dB
Channel equalizer characteristic
HI......................................................................–26 dB to +6 dB (20 kHz)
MID.....................................................................–26 dB to +6 dB (1 kHz)
LOW...................................................................–26 dB to +6 dB (20 Hz)
Microphone equalizer characteristic
HI....................................................................–12 dB to +12 dB (10 kHz)
LOW...............................................................–12 dB to +12 dB (100 Hz)
Input / Output terminals
LINE input terminals
RCA pin jacks................................................................................... 2 sets
LINE/PHONO input terminals
RCA pin jacks................................................................................... 2 sets
MIC input terminals
XLR connector & 1/4” TRS jack......................................................... 1 set
1/4” TRS jack...................................................................................... 1 set
MASTER output terminals
XLR connector................................................................................... 1 set
RCA pin jacks..................................................................................... 1 set
BOOTH output terminal
1/4” TRS jack...................................................................................... 1 set
PHONES output terminal
1/4” stereo jack .................................................................................. 1 set
3.5 mm stereo mini jack.................................................................... 1 set
USB terminals
B type................................................................................................ 2 sets
16
En
— The specifications and design of this product are subject to
change without notice.
Additional information
17
En
18
En
Pioneer DJ Americas, Inc.
LIMITED WARRANTY
WARRANTY VALID ONLY IN THE U.S.A. AND CANADA
WARRANTY
THIS LIMITED WARRANTY APPLIES TO THE ORIGINAL OR ANY SUBSEQUENT OWNER OF THIS PIONEER DJ PRODUCT DURING THE WARRANTY PERIOD PROVIDED THE
PRODUCT WAS PURCHASED FROM AN AUTHORIZED PIONEER DJ DISTRIBUTOR/DEALER IN THE U.S.A. OR CANADA. YOU WILL BE REQUIRED TO PROVIDE A SALES
RECEIPT OR OTHER VALID PROOF OF PURCHASE SHOWINGTHE DATE OF ORIGINAL PURCHASE OR, IF RENTED,YOUR RENTAL CONTRACT SHOWINGTHE PLACE AND
DATE OF FIRST RENTAL. IN THE EVENT SERVICE IS REQUIRED, THE PRODUCT MUST BE DELIVERED WITHIN THE WARRANTY PERIOD, TRANSPORTATION PREPAID,
ONLY FROM WITHIN THE U.S.A. AS EXPLAINED IN THIS DOCUMENT. YOU WILL BE RESPONSIBLE FOR REMOVAL AND INSTALLATION OF THE PRODUCT. PDJA WILL PAY
TO RETURNTHE REPAIRED OR REPLACEMENT PRODUCTTOYOU WITHINTHE U.S.A.
PRODUCT WARRANTY PERIOD
Audio and Video
..............................................................................................................................................................................................
Parts
Labor
1 Year
1 Year
The warranty period for retail customers who rent the product commences upon the date product is first put into use (a) during the rental period or (b) retail sale, whichever occurs first.
WHAT IS NOT COVERED
Additional information
Pioneer DJ Americas, Inc. (PDJA) warrants that products distributed by PDJA in the U.S.A. and Canada that fail to function properly under normal use due to a manufacturing
defect when installed and operated according to the owner’s manual enclosed with the unit will be repaired or replaced with a unit of comparable value, at the option of PDJA,
without charge to you for parts or actual repair work. Parts supplied under this warranty may be new or rebuilt at the option of PDJA.
IF THIS PRODUCT WAS PURCHASED FROM AN UNAUTHORIZED DISTRIBUTOR, THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTY
OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND THIS PRODUCT IS SOLD STRICTLY “AS IS” AND “WITH ALL FAULTS".
PIONEER DJ SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL AND/OR INCIDENTAL DAMAGES.
THIS WARRANTY DOES NOT APPLY IF THE PRODUCT HAS BEEN SUBJECTED TO POWER IN EXCESS OF ITS PUBLISHED POWER RATING.
THIS WARRANTY DOES NOT COVERTHE CABINET OR ANY APPEARANCE ITEM, USER ATTACHED ANTENNA, ANY DAMAGETO RECORDS OR RECORDINGTAPES OR DISCS, ANY
DAMAGE TO THE PRODUCT RESULTING FROM ALTERATIONS, MODIFICATIONS NOT AUTHORIZED IN WRITING BY PIONEER DJ, ACCIDENT, MISUSE OR ABUSE, DAMAGE DUE TO
LIGHTNING ORTO POWER SURGES, SUBSEQUENT DAMAGE FROM LEAKING, DAMAGE FROM INOPERATIVE BATTERIES, ORTHE USE OF BATTERIES NOT CONFORMINGTOTHOSE
SPECIFIED INTHE OWNER’S MANUAL.
THIS WARRANTY DOES NOT COVER THE COST OF PARTS OR LABOR WHICH WOULD BE OTHERWISE PROVIDED WITHOUT CHARGE UNDER THIS WARRANTY OBTAINED FROM
ANY SOURCE OTHERTHAN A PIONEER DJ AUTHORIZED SERVICE COMPANY OR OTHER DESIGNATED LOCATION. THISWARRANTY DOES NOT COVER DEFECTS OR DAMAGE CAUSED
BYTHE USE OF UNAUTHORIZED PARTS OR LABOR OR FROM IMPROPER MAINTENANCE.
ALTERED, DEFACED, OR REMOVED SERIAL NUMBERS VOID THIS ENTIRE WARRANTY
NO OTHER WARRANTIES
PIONEER DJ LIMITS ITS OBLIGATIONS UNDER ANY IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, TO A PERIOD NOT TO EXCEED THE WARRANTY PERIOD. NO WARRANTIES SHALL APPLY AFTER THE WARRANTY PERIOD.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND SOME STATES DO NOT ALLOW THE EXCLUSIONS OR LIMITATIONS
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS AND YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE.
TO OBTAIN SERVICE
PDJA has appointed a number of Authorized Service Companies throughout the U.S.A. and Canada should your product require service. To receive warranty service you
need to present your sales receipt or, if rented, your rental contract showing place and date of original owner’s transaction. If shipping the unit you will need to package it
carefully and send it, transportation prepaid by a traceable, insured method, to an Authorized Service Company. Package the product using adequate padding material to
prevent damage in transit. The original container is ideal for this purpose. Include your name, address and telephone number where you can be reached during business
hours.
On all complaints and concerns in the U.S.A. and Canada call Customer Support at 1-800-872-4159.
For hook-up and operation of your unit or to locate an
Authorized Service Company, please call or write:
CUSTOMER SUPPORT
PIONEER ELECTRONICS (USA) INC.
P.O. BOX 1720
LONG BEACH, CALIFORNIA 90801
1-800-872-4159
http://www.pioneerelectronics.com
DISPUTE RESOLUTION
Following our response to any initial request to Customer Support, should a dispute arise between you and Pioneer DJ, Pioneer DJ makes available its Complaint Resolution
Program to resolve the dispute. The Complaint Resolution Program is available to you without charge. You are required to use the Complaint Resolution Program before you exercise
any rights under, or seek any remedies, created by Title I of the Magnuson-Moss Warranty-Federal Trade Commission Improvement Act, 15 U.S.C. 2301 et seq.
To use the Complaint Resolution Program call 1-800-872-4159 and explain to the customer service representative the problem you are experiencing, steps you have taken
to have the product repaired during the warranty period and the name of the authorized Distributor/Dealer from whom the Pioneer DJ product was purchased. After the
complaint has been explained to the representative, a resolution number will be issued. Within 40 days of receiving your complaint, Pioneer DJ will investigate the dispute
and will either: (1) respond to your complaint in writing informing you what action Pioneer DJ will take, and in what time period, to resolve the dispute; or (2) respond to your
complaint in writing informing you why it will not take any action.
RECORD THE PLACE AND DATE OF PURCHASE FOR FUTURE REFERENCE
Model No. ____________________________________________ Serial No. _________________________________________ Purchase Date ______________________
Purchased From _____________________________________________________________________________________________________________________________
KEEP THIS INFORMATION AND YOUR SALES RECEIPT IN A SAFE PLACE
UCP0516
En
19
To register your product, find the nearest authorized service location, to
purchase replacement parts, operating instructions, or accessories,
please go to one of following URLs :
Pour enregistrer votre produit, trouver le service après-vente agréé le plus
proche et pour acheter des pièces de rechange, des modes d’emploi ou
des accessoires, reportez-vous aux URL suivantes :
In the USA/Aux Etats-Unis or In Canada/Aux Canada
http://www.pioneerelectronics.com
S018_C1_EnFr_PSV
© 2017 Pioneer DJ Corporation.
All rights reserved.
PIONEER ELECTRONICS (THAILAND) CO., LTD.
6F, Yokohama i-Mark Place, 4-4-5 Minatomirai, Nishi-ku, Yokohama, Kanagawa 220-0012 JAPAN
17th Fl., KPN Tower, 719 Rama 9 Road, Bangkapi, Huaykwang, Bangkok 10310
TEL: +66-2-717-0777
〒220-0012 神奈川県横浜市西区みなとみらい4丁目4番5号 横浜アイマークプレイス6階
PIONEER TECHNOLOGY (MALAYSIA) SDN. BHD
6F, Йокогама i-Mark Place, 4-4-5 Минатомирай, Ниси-ку, Йокогама, Канагава 220-0012 ЯПОНИЯ
ӒᎣ޷ӌԥ४ϵѨ
Корпорация Пайонир Диджей
16th Floor, Menara Uni. Asia 1008 Jalan Sultan Ismail 50250 Kuala Lumpur
TEL: +60-3-2697-2920
ѯᢋѯіҀϲ෺ୣ࿆ӏၰ ĵıĸ ဵ Ĺ ዃ TEL: +886-(0)2-2657-3588
Anteros Building, Odyssey Business Park, West End Road,South Ruislip, Middlesex, HA4
6QQ, U.K. TEL: +44-203-7617-220
2050 W. 190th Street, Suite 109, Torrance, CA 90504, U.S.A. TEL: +1 (424) 488-0480
ӒᎣႬφȞॸ෬ȟԥ४ϵѨ
ॸ෬Οᓹߞؔᢋၿ ĺıĺġဵ Ķġዃ TEL: +852-2848-6488
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec,
Mexico, D.F. 11000 TEL: +52-55-9178-4270
2 Jalan Kilang Barat, #07-01, Singapore 159346 TEL: +65-6378-7888
PIONEER INDIA ELECTRONICS PRIVATE LTD.
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
5 Arco Lane, Heatherton, Victoria, 3202, Australia, TEL: +61-3-9586-6300
216, Second Floor, Time Tower, M.G. Road, Sector 28, Gurgaon 122001,
Haryana, India TEL: +91-124-463-6100
PDJ_001_all
Printed in Malaysia
<DRH1468-A>
Download PDF
Similar pages