QuickSpecs
HP 3610 Switch Series
Overview
Models
HP 3610-48 Switch
HP 3610-24 Switch
HP 3610-24-TP Switch
HP 3610-24-SFP Switch
JD335A
JD336A
JD337A
JD338A
Key features
Full enterprise-class management features
Lower network administration costs
Unified network security strategy
Easy migration from IPv4 to IPv6
Product overview
These are fully managed 24- or 48-port 10/100 Layer 3 wire-speed Fast Ethernet switches with 4 Gigabit Ethernet uplinks and full
management features. The series has Layer 2/Layer 3 switching with advanced Layer 3 routing using static routes, RIP, OSPF BGP,
and multicast (PIM) routing. Fully IPv6 capable, with advanced IPv6/IPv4 routing, this series delivers a smooth transition from IPv4 to
IPv6.
Features and benefits
Quality of Service (QoS)
Broadcast control:
control allows limitation of broadcast traffic rate to cut down on unwanted broadcast traffic on the network
Powerful QoS feature:
feature supports the following congestion actions: strict priority queuing (SP), weighted round robin (WRR),
SP+WRR, and WRED
Traffic policing:
policing supports Committed Access Rate (CAR) and line rate
Advanced classifier-based QoS:
QoS classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies
QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or whole switch
Management
Friendly port names:
names allow assignment of descriptive names to ports
Remote configuration and management:
management is available through a secure Web browser or a command-line interface (CLI)
Manager and operator privilege levels:
levels enable read-only (operator) and read-write (manager) access on CLI and Web
browser management interfaces
Command authorization:
authorization leverages RADIUS to link a custom list of CLI commands to an individual network administrator's
login; also provides an audit trail
Secure Web GUI:
GUI provides a secure, easy-to-use graphical interface for configuring the module via HTTPS
Multiple configuration files:
files can be stored to the flash image
Complete session logging:
logging provides detailed information for problem identification and resolution
SNMPv1, v2c, and v3:
v3 facilitate centralized discovery, monitoring, and secure management of networking devices
Remote monitoring (RMON): uses standard SNMP to monitor essential network functions; supports events, alarm, history, and
statistics group plus a private alarm extension group
IEEE 802.1AB Link Layer Discovery Protocol (LLDP): automated device discovery protocol provides easy mapping by network
management applications
sFlow (RFC 3176): provides scalable, ASIC-based wire-speed network monitoring and accounting with no impact on network
DA - 13793
North America — Version 4 — November 7, 2011
Page 1
QuickSpecs
HP 3610 Switch Series
Overview
performance; this allows network operators to gather a variety of sophisticated network statistics and information for capacity
planning and real-time network monitoring purposes
Management VLAN:
VLAN segments traffic to and from management interfaces, including CLI/telnet, a Web browser interface, and
SNMP
Device Link Detection Protocol (DLDP): monitors cable between two switches and shuts down the ports on both ends if the
cable is broken, preventing network problems such as loops
Troubleshooting:
Troubleshooting ingress and egress port monitoring enable network problem solving; virtual cable tests provide visibility into
cable problems
IPv6 management:
management future-proofs networking, as the switch is capable of being managed whether the attached network is
running IPv4 or IPv6; supports Pingv6, Tracertv6, Telnetv6, TFTPv6, DNSv6, Syslogv6, FTPv6, SNMPv6, and ARPv6
Connectivity
Auto-MDIX:
Auto-MDIX automatically adjusts for straight-through or crossover cables on all 10/100 and 10/100/1000 ports
Flow control:
control using standard IEEE 802.3x, it provides back pressure to reduce congestion in heavy traffic situations
Ethernet OAM:
OAM provides a Layer 2 link performance and fault detection monitoring tool, which reduces failover and network
convergence times
Jumbo packet support:
support supports up to 9216-byte frame size to improve performance of large data transfers
Dual-personality functionality:
functionality four 10/100/1000 ports or SFP slots for optional fiber connectivity such as Gigabit-SX, -LX, or
-LH
High-density port connectivity:
connectivity provides up to 48 fixed 10/100Base-T or 24 SFP 100Base-X ports in a Layer 2/Layer 3/Layer
4 switch
Performance
Nonblocking architecture:
architecture up to 17.6 Gbps nonblocking switching fabric provides wire-speed switching with up to 13.1
million pps throughput
Hardware-based wire-speed access control lists (ACLs): feature-rich ACL implementation (TCAM based) helps ensure high
levels of security and ease of administration without impacting network performance
Resiliency and high availability
Separate data and control paths:
paths keeps control separated from services and keeps service processing isolated; increases
security and performance
External redundant power supply:
supply provides high reliability
Smart link:
link allows 50 ms failover between links
Spanning Tree/MSTP, RSTP:
RSTP provides redundant links while preventing network loops
Rapid Ring Protection Protocol (RRPP): connects multiple switches in a high-performance ring using standard Ethernet
technology; traffic can be rerouted around the ring in less than 50 ms, reducing the impact on traffic and applications
Virtual Router Redundancy Protocol (VRRP): allows a group of routers to dynamically back each other up to create highly
available routed environments
Layer 2 switching
16K MAC address table:
table provides access to many Layer 2 devices
VLAN support and tagging:
tagging support IEEE 802.1Q, with 4094 simultaneous VLAN IDs
GARP VLAN Registration Protocol (GVRP): allows automatic learning and dynamic assignment of VLANs
IEEE 802.1ad QinQ and Selective QinQ:
QinQ increase the scalability of an Ethernet network by providing a hierarchical
structure; connect multiple LANs on a high-speed campus or metro network
Gigabit Ethernet port aggregation:
aggregation allows grouping of ports to increase overall data throughput to a remote device
IGMP and MLD snooping:
snooping effectively control and manage the flooding of multicast packets in a Layer 2 network
Layer 3 services
DA - 13793
North America — Version 4 — November 7, 2011
Page 2
QuickSpecs
HP 3610 Switch Series
Overview
Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet
Dynamic Host Configuration Protocol (DHCP): simplifies the management of large IP networks and supports client and
server; DHCP Relay enables DHCP operation across subnets
Loopback interface address:
address defines an address in Routing Information Protocol (RIP) and OSPF that can always be
reachable, improving diagnostic capability
User Datagram Protocol (UDP) helper function:
function allows UDP broadcasts to be directed across router interfaces to specific IP
unicast or subnet broadcast addresses and prevents server spoofing for UDP services such as DHCP
Route maps:
maps provide more control during route redistribution; allow filtering and altering of route metrics
Layer 3 routing
IPv4 routing protocols:
protocols supports static routes, RIP, OSPF, IS-IS, and BGP
IPv6 routing protocols:
protocols provides routing of IPv6 at wire speed; supports static routes, RIPng, OSPFv3, IS-ISv6, and BGP4+ for
IPv6
Equal-Cost Multipath (ECMP): enables multiple equal-cost links in a routing environment to increase link redundancy and
scale bandwidth
Policy-based routing:
routing makes routing decisions based on policies set by the network administrator
IPv6 tunnels over IPv4:
IPv4 allows IPv6 infrastructure to be connected over legacy IPv4 networks
Bidirectional Forwarding Detection (BFD): enables link connectivity monitoring and reduces network convergence time for
RIP, OSPF, BGP, static routing, and VRRP
Security
Access control lists (ACLs): provides IP Layer 2 to Layer 4 traffic filtering; supports global ACL, VLAN ACL, port ACL, and IPv6
ACL
IEEE 802.1X:
802.1X industry-standard method of user authentication using an IEEE 802.1X supplicant on the client in conjunction
with a RADIUS server
MAC-based authentication:
authentication client is authenticated with the RADIUS server based on the client's MAC address
Identity-driven security and access control:
control
Per-user ACLs: permits or denies user access to specific network resources based on user identity and time of day,
allowing multiple types of users on the same network to access specific network services without risk to network security
or unauthorized access to sensitive data
Automatic VLAN assignment: automatically assigns users to the appropriate VLAN based on their identities
Secure management access:
access securely encrypts all access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3
Secure File Transfer Protocol (FTP): allows secure file transfer to and from the switch; protects against unwanted file
downloads or unauthorized copying of switch configuration file
Guest VLAN:
VLAN similar to IEEE 802.1X, it provides a browser-based environment to authenticated clients
Endpoint Admission Defense (EAD): provides security policies to users accessing a network
Port security:
security allows access only to specified MAC addresses, which can be learned or specified by the administrator
Port isolation:
isolation secures and adds privacy, and prevents malicious attackers from obtaining user information
STP BPDU port protection:
protection blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged
BPDU attacks
STP Root Guard:
Guard protects root bridge from malicious attack or configuration mistakes
DHCP protection:
protection blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
Dynamic ARP protection:
protection blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data
IP Source Guard:
Guard filters packets on a per-port basis, which prevents illegal packets from being forwarded
RADIUS/HWTACACS:
RADIUS/HWTACACS eases switch management security administration by using a password authentication server
Convergence
IEEE 802.1AB Link Layer Discovery Protocol (LLDP): is an automated device discovery protocol for easy mapping by network
management applications
DA - 13793
North America — Version 4 — November 7, 2011
Page 3
QuickSpecs
HP 3610 Switch Series
Overview
LLDP-MED:
LLDP-MED is a standard extension that automatically configures network devices, including LLDP-capable IP phones
LLDP-CDP compatibility: receives and recognizes CDP packets from Cisco's IP phones for seamless interoperation
Voice VLAN:
VLAN automatically assigns VLAN and priority for IP phones, simplifying network configuration and maintenance
IP multicast snooping (data-driven IGMP): automatically prevents flooding of IP multicast traffic
Internet Group Management Protocol (IGMP): is used by IP hosts to establish and maintain multicast groups; supports v1, v2,
and v3; utilizes Any-Source Multicast (ASM) or Source-Specific Multicast (SSM) to manage IPv4 multicast networks
Protocol Independent Multicast (PIM): is used for IPv4 and IPv6 multicast applications; supports PIM dense mode (DM),
sparse mode (SM), and source-specific mode (SSM)
Multicast Source Discovery Protocol (MSDP): is used for inter-domain multicast applications, allowing multiple PIM-SM
domains to interoperate
Multicast VLAN:
VLAN allows multiple VLANs to receive the same IPv4 or IPv6 multicast traffic, reducing network bandwidth demand
by eliminating multiple streams to each VLAN
Additional information
Green initiative support:
support provides support for RoHS and WEEE regulations
Warranty and support
Lifetime warranty:
warranty for as long as you own the product with advance replacement and next-business-day delivery (available in
most countries)*
Electronic and telephone support:
support limited electronic and telephone support is available from HP; refer to:
www.hp.com/networking/warranty for details on the support provided and the period during which support is available
Software releases:
releases refer to: www.hp.com/networking/warranty for details on the software releases provided and the period
during which software releases are available for your product(s)
* Hardware warranty replacement for as long as you own the product, with next business day advance replacement (available in
most countries) with a five-year hardware warranty replacement for the disk drive included with HP AllianceONE Services zl Module,
HP Threat Management Services zl Module, HP PCM+ Agent with AllianceONE Services zl Module, and HP E-MSM765 zl Mobility
Controller. For details, refer to the HP Software License, Warranty, and Support booklet at: www.hp.com/networking/warranty.
DA - 13793
North America — Version 4 — November 7, 2011
Page 4
QuickSpecs
HP 3610 Switch Series
Technical Specifications
HP 3610-48 Switch (JD335A)
48 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX);
Ports
Duplex: half or full
4 SFP 1000 Mbps ports
1 RJ-45 serial console port
10.2(d) x 17.3(w) x 1.7(h) in. (25.91 x 43.94 x 4.32 cm) (1U height)
Physical characteristics
Dimensions
8.38 lb. (3.8 kg)
Weight
128 MB SDRAM, 32 MB flash; packet buffer size: 32 MB
Memory and processor
Mounts in an EIA standard 19-in. telco rack or equipment cabinet (hardware included)
Mounting
< 10 µs
Performance
Latency
Environment
Electrical characteristics
Safety
Emissions
Management
Services
Throughput
up to 13.1 million pps
17.6 Gbps
Routing/Switching
capacity
11000 entries
Routing table size
32ºF to 113ºF (0ºC to 45ºC)
Operating temperature
10% to 90%, noncondensing
Operating relative
humidity
-40ºF to 158ºF (-40ºC to 70ºC)
Nonoperating/Storage
temperature
5% to 95%, noncondensing
Nonoperating/Storage
relative humidity
Maximum heat dissipation 153 BTU/hr (161.42 kJ/hr)
100-240 VAC
Voltage
-48 to -60 VDC
DC Voltage
45 W
Maximum power rating
50/60 Hz
Frequency
Maximum power rating and maximum heat dissipation are the worst-case
Notes
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2;
IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60950-1/A11; FDA 21 CFR Subchapter J; ROHS
Compliance
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI
C63.4 2003; ETSI EN 300 386 V1.3.3; AS/NZS CISPR22 Class A; EN 61000-3-2; EN 61000-3-3; EN
61000-4-2; EN 61000-4-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-11; EN
61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC
(CFR 47, Part 15) Class A
IMC - Intelligent Management Center; command-line interface; Web browser
3-year, 4-hour onsite, 13x5 coverage for hardware (UV822E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV825E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (UV828E)
3-year, 24x7 SW phone support, software updates (UV831E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV823E)
DA - 13793
North America — Version 4 — November 7, 2011
Page 5
QuickSpecs
HP 3610 Switch Series
Technical Specifications
4-year, 4-hour onsite, 24x7 coverage for hardware (UV826E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV829E)
4-year, 24x7 SW phone support, software updates (UV832E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV824E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV827E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV830E)
5-year, 24x7 SW phone support, software updates (UV833E)
3 Yr 6 hr Call-to-Repair Onsite (UW431E)
4 Yr 6 hr Call-to-Repair Onsite (UW432E)
5 Yr 6 hr Call-to-Repair Onsite (UW433E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your
local HP sales office.
HP 3610-24 Switch (JD336A)
24 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX);
Ports
Duplex: half or full
4 SFP 1000 Mbps ports
1 RJ-45 serial console port
10.2(d) x 17.3(w) x 1.7(h) in. (25.91 x 43.94 x 4.32 cm) (1U height)
Physical characteristics
Dimensions
7.94 lb. (3.6 kg)
Weight
128 MB SDRAM, 32 MB flash; packet buffer size: 32 MB
Memory and processor
Mounts in an EIA standard 19-in. telco rack or equipment cabinet (hardware included)
Mounting
< 10 µs
Performance
Latency
up to 9.5 million pps
Throughput
12.8 Gbps
Routing/Switching
capacity
11000 entries
Routing table size
32ºF to 113ºF (0ºC to 45ºC)
Environment
Operating temperature
10% to 90%, noncondensing
Operating relative
humidity
-40ºF to 158ºF (-40ºC to 70ºC)
Nonoperating/Storage
temperature
5% to 95%, noncondensing
Nonoperating/Storage
relative humidity
Electrical characteristics Maximum heat dissipation 119 BTU/hr (125.54 kJ/hr)
100-240 VAC
Voltage
-48 to -60 VDC
DC Voltage
35 W
Maximum power rating
50/60 Hz
Frequency
Maximum power rating and maximum heat dissipation are the worst-case
Notes
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
DA - 13793
North America — Version 4 — November 7, 2011
Page 6
QuickSpecs
HP 3610 Switch Series
Technical Specifications
Safety
Emissions
Management
Services
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2;
IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60950-1/A11; FDA 21 CFR Subchapter J; ROHS
Compliance
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI
C63.4 2003; ETSI EN 300 386 V1.3.3; AS/NZS CISPR22 Class A; EN 61000-3-2; EN 61000-3-3; EN
61000-4-2; EN 61000-4-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-11; EN
61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC
(CFR 47, Part 15) Class A
IMC - Intelligent Management Center; command-line interface; Web browser
3-year, 4-hour onsite, 13x5 coverage for hardware (UV822E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV825E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (UV828E)
3-year, 24x7 SW phone support, software updates (UV831E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV823E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV826E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV829E)
4-year, 24x7 SW phone support, software updates (UV832E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV824E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV827E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV830E)
5-year, 24x7 SW phone support, software updates (UV833E)
3 Yr 6 hr Call-to-Repair Onsite (UW431E)
4 Yr 6 hr Call-to-Repair Onsite (UW432E)
5 Yr 6 hr Call-to-Repair Onsite (UW433E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your
local HP sales office.
HP 3610-24-TP Switch (JD337A)
24 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX);
Ports
Duplex: half or full
2 SFP 1000 Mbps ports
2 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
1 RJ-45 serial console port
10.2(d) x 17.3(w) x 1.7(h) in. (25.91 x 43.94 x 4.32 cm) (1U height)
Physical characteristics
Dimensions
8.16 lb. (3.7 kg)
Weight
128 MB SDRAM, 32 MB flash; packet buffer size: 32 MB
Memory and processor
Mounts in an EIA standard 19-in. telco rack or equipment cabinet (hardware included)
Mounting
< 10 µs
Performance
Latency
up to 9.5 million pps
Throughput
12.8 Gbps
Routing/Switching
capacity
11000 entries
Routing table size
32ºF to 113ºF (0ºC to 45ºC)
Environment
Operating temperature
DA - 13793
North America — Version 4 — November 7, 2011
Page 7
QuickSpecs
HP 3610 Switch Series
Technical Specifications
Electrical characteristics
Operating relative
10% to 90%, noncondensing
humidity
-40ºF to 158ºF (-40ºC to 70ºC)
Nonoperating/Storage
temperature
5% to 95%, noncondensing
Nonoperating/Storage
relative humidity
Maximum heat dissipation 137 BTU/hr (144.54 kJ/hr)
100-240 VAC
Voltage
-48 to -60 VDC
DC Voltage
40 W
Maximum power rating
50/60 Hz
Frequency
Notes
Safety
Emissions
Management
Services
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2;
IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60950-1/A11; FDA 21 CFR Subchapter J; ROHS
Compliance
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI
C63.4 2003; ETSI EN 300 386 V1.3.3; AS/NZS CISPR22 Class A; EN 61000-3-2; EN 61000-3-3; EN
61000-4-2; EN 61000-4-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-11; EN
61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC
(CFR 47, Part 15) Class A
IMC - Intelligent Management Center; command-line interface; Web browser
3-year, 4-hour onsite, 13x5 coverage for hardware (UV822E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV825E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (UV828E)
3-year, 24x7 SW phone support, software updates (UV831E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV823E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV826E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV829E)
4-year, 24x7 SW phone support, software updates (UV832E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV824E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV827E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV830E)
5-year, 24x7 SW phone support, software updates (UV833E)
3 Yr 6 hr Call-to-Repair Onsite (UW431E)
4 Yr 6 hr Call-to-Repair Onsite (UW432E)
5 Yr 6 hr Call-to-Repair Onsite (UW433E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your
local HP sales office.
HP 3610-24-SFP Switch (JD338A)
DA - 13793
North America — Version 4 — November 7, 2011
Page 8
QuickSpecs
HP 3610 Switch Series
Technical Specifications
Ports
Physical characteristics
Memory and processor
Mounting
Performance
Environment
Electrical characteristics
Safety
Emissions
Management
Services
24 SFP 100 Mbps ports
2 SFP 1000 Mbps ports
2 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
1 RJ-45 serial console port
10.2(d) x 17.3(w) x 1.7(h) in. (25.91 x 43.94 x 4.32 cm) (1U height)
Dimensions
8.38 lb. (3.8 kg)
Weight
128 MB SDRAM, 32 MB flash; packet buffer size: 32 MB
Mounts in an EIA standard 19-in. telco rack or equipment cabinet (hardware included)
< 10 µs
Latency
up to 9.5 million pps
Throughput
Routing/Switching
12.8 Gbps
capacity
11000 entries
Routing table size
32ºF to 113ºF (0ºC to 45ºC)
Operating temperature
10% to 90%, noncondensing
Operating relative
humidity
-40ºF to 158ºF (-40ºC to 70ºC)
Nonoperating/Storage
temperature
5% to 95%, noncondensing
Nonoperating/Storage
relative humidity
Maximum heat dissipation 205 BTU/hr (216.27 kJ/hr)
100-240 VAC
Voltage
-48 to -60 VDC
DC Voltage
60 W
Maximum power rating
50/60 Hz
Frequency
Maximum power rating and maximum heat dissipation are the worst-case
Notes
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2;
IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60950-1/A11; FDA 21 CFR Subchapter J; ROHS
Compliance
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI
C63.4 2003; ETSI EN 300 386 V1.3.3; AS/NZS CISPR22 Class A; EN 61000-3-2; EN 61000-3-3; EN
61000-4-2; EN 61000-4-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-11; EN
61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC
(CFR 47, Part 15) Class A
IMC - Intelligent Management Center; command-line interface; Web browser
3-year, 4-hour onsite, 13x5 coverage for hardware (UV822E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV825E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (UV828E)
3-year, 24x7 SW phone support, software updates (UV831E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV823E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV826E)
DA - 13793
North America — Version 4 — November 7, 2011
Page 9
QuickSpecs
HP 3610 Switch Series
Technical Specifications
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV829E)
4-year, 24x7 SW phone support, software updates (UV832E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV824E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV827E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV830E)
5-year, 24x7 SW phone support, software updates (UV833E)
3 Yr 6 hr Call-to-Repair Onsite (UW431E)
4 Yr 6 hr Call-to-Repair Onsite (UW432E)
5 Yr 6 hr Call-to-Repair Onsite (UW433E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your
local HP sales office.
Standards and protocols
(applies to all products in
series)
BGP
RFC 1657 Definitions of Managed Objects for
BGPv4
RFC 1771 BGPv4
RFC 2858 BGP-4 Multi-Protocol Extensions
Device management
RFC 1157 SNMPv1/v2c
RFC 1901 (Community based SNMPv2)
RFC 1902 (SNMPv2)
RFC 2573 (SNMPv3 Applications)
RFC 2576 (Coexistence between SNMP V1, V2,
V3)
RFC 2819 (RMON groups Alarm, Event, History
and Statistics only)
HTML and telnet management
Multiple Configuration Files
SNMP v3 and RMON RFC support
SSHv1/SSHv2 Secure Shell
TACACS/TACACS+
General protocols
IEEE 802.1ad Q-in-Q
IEEE 802.1ag Service Layer OAM
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q (GVRP)
IEEE 802.1Q VLANs
IEEE 802.1s (MSTP)
IEEE 802.1v VLAN classification by Protocol and
Port
IEEE 802.1w Rapid Reconfiguration of Spanning
Tree
IEEE 802.3ab 1000BASE-T
IEEE 802.3ad Link Aggregation (LAG)
IEEE 802.3ah Ethernet in First Mile over Point to
Point Fiber - EFMF
IEEE 802.3i 10BASE-T
DA - 13793
RFC 2461 IPv6 Neighbor Discovery
RFC 2462 IPv6 Stateless Address Autoconfiguration
RFC 2463 ICMPv6
RFC 2464 Transmission of IPv6 over Ethernet
Networks
RFC 2475 IPv6 DiffServ Architecture
RFC 2710 Multicast Listener Discovery (MLD) for
IPv6
RFC 2740 OSPFv3 for IPv6
RFC 2893 Transition Mechanisms for IPv6 Hosts
and Routers
RFC 2925 Remote Operations MIB (Ping only)
RFC 3056 Connection of IPv6 Domains via IPv4
Clouds
RFC 3162 RADIUS and IPv6
RFC 3306 Unicast-Prefix-based IPv6 Multicast
Addresses
RFC 3307 IPv6 Multicast Address Allocation
RFC 3484 Default Address Selection for IPv6
RFC 3493 Basic Socket Interface Extensions for
IPv6
RFC 3513 IPv6 Addressing Architecture
RFC 3587 IPv6 Global Unicast Address Format
RFC 3810 MLDv2 (host joins only)
RFC 4443 ICMPv6
RFC 4541 IGMP & MLD Snooping Switch
RFC 4861 IPv6 Neighbor Discovery
MIBs
IEEE 8021-PAE-MIB
IEEE 8023-LAG-MIB
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 1724 RIPv2 MIB
RFC 1850 OSPFv2 MIB
RFC 2011 SNMPv2 MIB for IP
RFC 2013 SNMPv2 MIB for UDP
North America — Version 4 — November 7, 2011
Page 10
QuickSpecs
HP 3610 Switch Series
Technical Specifications
IEEE 802.3u 100BASE-X
IEEE 802.3x Flow Control
IEEE 802.3z 1000BASE-X
RFC 768 UDP
RFC 783 TFTP Protocol (revision 2)
RFC 791 IP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 TELNET
RFC 925 Multi-LAN Address Resolution
RFC 951 BOOTP
RFC 959 File Transfer Protocol (FTP)
RFC 1058 RIPv1
RFC 1122 Host Requirements
RFC 1519 CIDR
RFC 1542 BOOTP Extensions
RFC 1723 RIP v2
RFC 1812 IPv4 Routing
RFC 1981 Path MTU Discovery for IP version 6
RFC 2131 DHCP
RFC 2236 IGMP Snooping
RFC 2338 VRRP
RFC 2453 RIPv2
RFC 2616 Hypertext Transfer Protocol -- HTTP/1.1
RFC 2644 Directed Broadcast Control
RFC 3046 DHCP Relay Agent Information Option
RFC 3416 Protocol Operations for SNMP
RFC 3623 Graceful OSPF Restart
RFC 4213 Basic IPv6 Transition Mechanisms
RFC 4675 RADIUS VLAN & Priority
IP multicast
RFC 1112 IGMP
RFC 2362 PIM Sparse Mode
RFC 3376 IGMPv3
RFC 3569 An Overview of Source-Specific
Multicast
(SSM)
RFC 3618 Multicast Source Discovery Protocol
(MSDP)
RFC 3973 PIM Dense Mode
IPv6
RFC 1887 IPv6 Unicast Address Allocation
Architecture
RFC 1981 IPv6 Path MTU Discovery
RFC 2080 RIPng for IPv6
RFC 2373 IPv6 Addressing Architecture
RFC 2375 IPv6 Multicast Address Assignments
RFC 2460 IPv6 Specification
DA - 13793
RFC 2233 Interface MIB
RFC 2571 SNMP Framework MIB
RFC 2572 SNMP-MPD MIB
RFC 2573 SNMP-Notification MIB
RFC 2573 SNMP-Target MIB
RFC 2618 RADIUS Authentication Client MIB
RFC 2620 RADIUS Accounting Client MIB
RFC 2665 Ethernet-Like-MIB
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
RFC 2688 MAU-MIB
RFC 2787 VRRP MIB
RFC 2819 RMON MIB
RFC 2925 Ping MIB
RFC 2932IP (Multicast Routing MIB)
RFC 3414 SNMP-User based-SM MIB
RFC 3415 SNMP-View based-ACM MIB
RFC 3418 MIB for SNMPv3
RFC 3621 Power Ethernet MIB
RFC 3826 AES for SNMP's USM MIB
RFC 4133 Entity MIB (Version 3)
LLDP-EXT-DOT1-MIB
LLDP-EXT-DOT3-MIB
LLDP-MIB
Network management
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
RFC 3176 sFlow
ANSI/TIA-1057 LLDP Media Endpoint Discovery
(LLDP-MED)
SNMPv1/v2c/v3
OSPF
RFC 1587 OSPF NSSA
RFC 1765 OSPF Database Overflow
RFC 2328 OSPFv2
RFC 2370 OSPF Opaque LSA Option
QoS/CoS
IEEE 802.1P (CoS)
RFC 2474 DiffServ Precedence, including 8
queues/port
RFC 2597 DiffServ Assured Forwarding (AF)- partial
support
Security
IEEE 802.1X Port Based Network Access Control
RFC 2865 RADIUS Authentication
RFC 2866 RADIUS Accounting
RFC 2869 RADIUS Extensions
RFC 3162 RADIUS and IPv6
North America — Version 4 — November 7, 2011
Page 11
QuickSpecs
HP 3610 Switch Series
Accessories
HP 3610 Switch Series
accessories
Transceivers
HP X124 1G SFP LC LH40 1310nm Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X125 1G SFP RJ45 T Transceiver
HP X110 100M SFP LC LH40 Transceiver
HP X110 100M SFP LC LH80 Transceiver
HP X110 100M SFP LC FX Transceiver
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X110 100M SFP LC LX Transceiver
Cables
HP 0.5 m Multimode OM3 LC/LC Optical Cable
HP 1 m Multimode OM3 LC/LC Optical Cable
HP 2 m Multimode OM3 LC/LC Optical Cable
HP 5 m Multimode OM3 LC/LC Optical Cable
HP 15 m Multimode OM3 LC/LC Optical Cable
HP 30 m Multimode OM3 LC/LC Optical Cable
HP 50 m Multimode OM3 LC/LC Optical Cable
NEW HP 0.5 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 1 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 2 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 5 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 15 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 30 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 50 m PremierFlex OM3+ LC/LC Optical Cable
Power Supply
HP RPS800 Redundant Power System
HP RPS1600 Redundant Power System
HP RPS1600 1600W AC Power Supply
Power cords
HP X290 H2.7 JD5-A 1m RPS800 Cable
HP X290 JD5-A JD5-A 2m RPS1600 Cable
HP X290 JD5 JD5-A 2m RPS1600 Cable
DA - 13793
North America — Version 4 — November 7, 2011
JD061A
JD062A
JD063B
JD089B
JD090A
JD091A
JD102B
JD118B
JD119B
JD120B
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
BK837A
BK838A
BK839A
BK840A
BK841A
BK842A
BK843A
JD183A
JG136A
JG137A
JD186A
JD188A
JD189A
Page 12
QuickSpecs
HP 3610 Switch Series
Accessory Product Details
NOTE: Details are not available for all accessories. The following specifications were available at the time of publication.
HP X124 1G SFP LC LH40 Ports
1310nm Transceiver
Connectivity
(JD061A)
A small form-factor
pluggable SFP Gigabit
LH40 transceiver that
provides a full duplex
Gigabit solution up to
40km on a single-mode
fiber.
Physical characteristics
Electrical characteristics
Cabling
1 LC 1000Base-LH port (no IEEE standard exists for 1550 nm optics)
Connector type
LC
Wavelength
1310 nm
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
Full configuration weight 0.04 lb. (0.02 kg)
Power consumption typical 0.8 W
Power consumption
1.0 W
maximum
Cable type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
40km distance
Fiber type
Single Mode
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Services
HP X120 1G SFP LC LH40 Ports
1550nm Transceiver
Connectivity
(JD062A)
Physical characteristics
A small form-factor
pluggable (SFP) Gigabit
LH40 transceiver that
Electrical characteristics
provides a full-duplex
Gigabit solution up to 40
km on a single mode fiber.
Cabling
1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)
Connector type
LC
Wavelength
1550 nm
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
Full configuration weight 0.04 lb. (0.02 kg)
Power consumption typical 0.8 W
Power consumption
1.0 W
maximum
Cable type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
Services
DA - 13793
40km distance
Fiber type
Single Mode
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
North America — Version 4 — November 7, 2011
Page 13
QuickSpecs
HP 3610 Switch Series
Accessory Product Details
HP X125 1G SFP LC
LH70 Transceiver
(JD063B)
Ports
Connectivity
A small form-factor
pluggable (SFP) Gigabit
LH70 transceiver that
provides a full-duplex
Gigabit solution up to
70km on a single-mode
fiber.
Physical characteristics
Electrical characteristics
Cabling
Maximum distance:
• 70km
Fiber type
Single Mode
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
Services
HP X125 1G SFP RJ45 T Ports
Transceiver (JD089B)
Connectivity
Physical characteristics
A small form factor
pluggable (SFP) Gigabit
1000Base-T transceiver
that provides a full duplex Electrical characteristics
Gigabit solution up to
100m on a Cat-5+ cable.
Cabling
Services
DA - 13793
1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)
LC
Connector type
1550 nm
Wavelength
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
Dimensions
1.17 cm)
Full configuration weight 0.04 lb. (0.02 kg)
0.8 W
Power consumption
typical
1.0 W
Power consumption
maximum
Cable type:
Single-mode fiber optic, complying with ITU-T G.652;
1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T)
RJ-45
Connector type
2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x
Dimensions
1.4 cm)
Full configuration weight 0.07 lb. (0.03 kg)
0.8 W
Power consumption
typical
1.0 W
Power consumption
maximum
Cable type:
1000BASE-T: Category 5 (5E or better recommended), 100 Ù differential 4pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced,
complying with IEEE 802.3ab 1000BASE-T;
Maximum distance:
• 100m
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
North America — Version 4 — November 7, 2011
Page 14
QuickSpecs
HP 3610 Switch Series
Accessory Product Details
HP X120 1G SFP LC SX
Transceiver (JD118B)
Ports
Connectivity
A small form-factor
pluggable (SFP) Gigabit SX Physical characteristics
transceiver that provides a
full-duplex Gigabit
solution up to 550m on a Electrical characteristics
Multimode fiber.
Cabling
Services
HP X120 1G SFP LC LX
Transceiver (JD119B)
Ports
Connectivity
A small form-factor
pluggable (SFP) Gigabig Physical characteristics
LX transceiver that provides
a full duplex Gigabit
solution up to 550m on
Electrical characteristics
MMF or 10Km on SMF
Cabling
Services
DA - 13793
1 LC 1000BASE-SX port
Connector type
Wavelength
Dimensions
LC
850 nm
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
1.17 cm)
Full configuration weight 0.04 lb. (0.02 kg)
Power consumption
0.8 W
typical
1.0 W
Power consumption
maximum
Maximum distance:
• FDDI Grade distance = 220m
• OM1 = 275m
• OM2 = 500m
• OM3 = Not Specified by standard
Cable length
up to 550m
Fiber type
Multi Mode
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
1 SFP 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX)
LC
Connector type
1300 nm
Wavelength
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
Dimensions
1.17 cm)
Full configuration weight 0.04 lb. (0.02 kg)
0.8 W
Power consumption
typical
1.0 W
Power consumption
maximum
Cable type:
Either single mode or multimode;
Maximum distance:
• 550m for Multimode
• 10km for Singlemode
Fiber type
Both
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
North America — Version 4 — November 7, 2011
Page 15
QuickSpecs
HP 3610 Switch Series
Accessory Product Details
HP 0.5 m Multimode
OM3 LC/LC Optical
Cable (AJ833A)
Cabling
Notes
Services
DA - 13793
Cable type:
type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical glass: Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical glass: Bandwidth: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: 600 / 600 meters
@850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber and designed to work in both the 850 and
1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
North America — Version 4 — November 7, 2011
Page 16
QuickSpecs
HP 3610 Switch Series
Accessory Product Details
HP 1 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ834A)
Notes
Services
DA - 13793
Cable type:
type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the 850
and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
North America — Version 4 — November 7, 2011
Page 17
QuickSpecs
HP 3610 Switch Series
Accessory Product Details
HP 2 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ835A)
Notes
Services
DA - 13793
Cable type:
type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the 850
and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
North America — Version 4 — November 7, 2011
Page 18
QuickSpecs
HP 3610 Switch Series
Accessory Product Details
HP 5 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ836A)
Notes
Services
DA - 13793
Cable type:
type
50/125 µm core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: This specification defines the detail requirements for a tight
buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable
and Ethernet assembly with LC duplex connectors on one end and LC duplex
connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the 850
and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
North America — Version 4 — November 7, 2011
Page 19
QuickSpecs
HP 3610 Switch Series
Accessory Product Details
HP 15 m Multimode
OM3 LC/LC Optical
Cable (AJ837A)
Cabling
Notes
Services
DA - 13793
Cable type:
type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the 850
and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
North America — Version 4 — November 7, 2011
Page 20
QuickSpecs
HP 3610 Switch Series
Accessory Product Details
HP 30 m Multimode
OM3 LC/LC Optical
Cable (AJ838A)
Cabling
Notes
Services
DA - 13793
Cable type:
type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the 850
and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
North America — Version 4 — November 7, 2011
Page 21
QuickSpecs
HP 3610 Switch Series
Accessory Product Details
HP 50 m Multimode
OM3 LC/LC Optical
Cable (AJ839A)
Cabling
Notes
Services
DA - 13793
Cable type:
type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the 850
and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
North America — Version 4 — November 7, 2011
Page 22
QuickSpecs
HP 3610 Switch Series
Accessory Product Details
HP 0.5 m PremierFlex
OM3+ LC/LC Optical
Cable (BK837A)
Notes
Services
HP 1 m PremierFlex
OM3+ LC/LC Optical
Cable (BK838A)
Notes
Services
DA - 13793
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ± 3um; Cladding diameter: 125um ± 2um;
Coating diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade - Low Smoke Zero Halogen (LSZH)
thermoplastic.
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL OFN FT4, ROHS. Cable also has a longitudal
white stripe that runs the entire length of the cable.
• Insertion Loss: less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310
nm @ 23°C as tested in accordance with EIA 455-46
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core Diameter: 50um ±3um, Cladding diameter: 125um ±2um;
Coating diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a
longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
North America — Version 4 — November 7, 2011
Page 23
QuickSpecs
HP 3610 Switch Series
Accessory Product Details
HP 2 m PremierFlex
OM3+ LC/LC Optical
Cable (BK839A)
Notes
Services
HP 5 m PremierFlex
OM3+ LC/LC Optical
Cable (BK840A)
Notes
Services
DA - 13793
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a
longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a
longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
North America — Version 4 — November 7, 2011
Page 24
QuickSpecs
HP 3610 Switch Series
Accessory Product Details
HP 15 m PremierFlex
OM3+ LC/LC Optical
Cable (BK841A)
Notes
Services
HP 30 m PremierFlex
OM3+ LC/LC Optical
Cable (BK842A)
Notes
Services
DA - 13793
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a
longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a
longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
North America — Version 4 — November 7, 2011
Page 25
QuickSpecs
HP 3610 Switch Series
Accessory Product Details
HP 50 m PremierFlex
OM3+ LC/LC Optical
Cable (BK843A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a
longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Services
HP RPS1600 Redundant
Power System (JG136A)
Ports
Physical characteristics
Environment
Electrical characteristics
DA - 13793
8 redundant power supply ports
Restrictions: two -56V/25A DC(PoE); six -56V/8A DC(non-PoE)
15.63(d) x 17.32(w) x 1.74(h) in. (39.7 x 44 x
Dimensions
4.42 cm)
14.11 lb. (6.4 kg)
Weight
Full configuration weight 16.75 lb. (7.6 kg)
14°F to 122°F (-10°C to 50°C)
Operating temperature
5% to 95%
Operating relative
humidity
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
temperature
5% to 95%
Nonoperating/Storage
relative humidity
up to 13,123 ft. (4 km)
Altitude
Pressure: 53 dB; ISO 7779, ISO 9296
Acoustic
100-120/200-240 VAC
Voltage
30/60 A
Current
38 W
Idle power
3550 W
Maximum power rating
3200 W
RPS power
2800 W
PoE power
-55 V
RPS
-55 V
PoE
50/60 Hz
Frequency
North America — Version 4 — November 7, 2011
Page 26
QuickSpecs
HP 3610 Switch Series
Accessory Product Details
Notes
Idle power is the actual power consumption of
the device with no ports connected.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all
modules populated.
With one RPS1600 Power Supply, the PRS1600
Redundant Power System can provide 1600W
power output; With two PRS1600 Power
Supplies, the output power is 3200W.
CE Labeled; UL 60950-1; IEC 60950-1; ICES-003; FCC Part 15, Subpart
B; EU RoHS Compliant; EN 60950-1/A11; C-Tick; VCCI Class A; ROHS
Compliance; EN 300386
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
Safety
Services
HP RPS1600 1600W AC Physical characteristics
Power Supply (JG137A)
Environment
Electrical characteristics
Services
DA - 13793
Dimensions
Weight
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Voltage
Current
Maximum power rating
Frequency
Notes
8.19(d) x 4.96(w) x 1.63(h) in. (20.8 x 12.6 x
4.15 cm)
3.02 lb. (1.37 kg)
14°F to 122°F (-10°C to 50°C)
5% to 95%
-40°F to 158°F (-40°C to 70°C)
5% to 95%
100-120/200-240 VAC
15/30 A
1600 W
50/60 Hz
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all
modules populated.
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
North America — Version 4 — November 7, 2011
Page 27
QuickSpecs
HP 3610 Switch Series
Accessory Product Details
To learn more, visit: www.hp.com/networking
© Copyright 2010-2011 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change
without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
DA - 13793
North America — Version 4 — November 7, 2011
Page 28
Download PDF
Similar pages