ISO 9001 CERTIFIED
0575
Ⅱ 1Dc 90°C / Ⅱ 2 GD c 100°C
VACUUM CONVEYOR SYSTEM
www.vmeca.com
VACUUM CONVEYOR
Specifications subject to change without notice
www.vmeca.com
VACUUM CONVEYOR
Specifications subject to change without notice
www.vmeca.com
VACUUM CONVEYOR
Specifications subject to change without notice
www.vmeca.com
VACUUM CONVEYOR
Why!! We are VMECA Vacuum conveyor system?
► Minimal Maintenance
► Low Noise Level
► Automatic Filter Cleaning System
► Simple to Installation
► Compact Size
► Easy To Clean
► Dustless Conveying
► Acid-Proof
► Polished Stainless Steel
► Easy to Maintenance
► Transports Large Amount
► Atmospheres Explosibles
Approval(ATEX)
ISO 9001 CERTIFIED
0575
Ⅱ 1Dc 90°C / Ⅱ 2 GD c 100°C
Specifications subject to change without notice
www.vmeca.com
VACUUM CONVEYOR
PATENT
Vacuum Cartridge
PT
√ Maintains vacuum despite fluctuations in air pressure
√ Fast response time
√ Selectable cartridge quantity
√ Easy maintenance
√ Improved to the latest cartridge technology
from the classic type of generator.
√
Easy selection and maintenance of
VMECA Vacuum Cartridges.
Cartridge Filter
Bag Filter
Filter
√
√
√
√
√
√
√
√
Easy replacement
Pleated media filter
Large filter surface area due to a pleated media filter
Antistatic filter
Food quality
Electrically Conductive Polyester with PTFE membrane(cartridge filter)
TFE coated antistatic Felt of polyester / Carbon fibers
Washable 2 to 4 times in 40℃ ( bag filter)
Specifications subject to change without notice
www.vmeca.com
VACUUM CONVEYOR
Atmospheric
Pressure
Vacuum Conveyor Principle
Vacuum
The Vacuum Conveyor utilizes the vacuum to pick up the material for transfer.
This process is called a difference in pressure. This is where atmospheric air and the different air
pressure tries to equalize itself which in turn creates suction.
The same concept is used here when the air within the pipeline is evacuated creating a negative
pressure (difference in pressure). This negative pressure has the strength to pull the solid particles
through the pipeline and into the Vacuum Conveyor.
The below pictures are the order of which the materials are transferred.
The materials are poured into a tank which transfers through the pipeline mixing with the outside air
and material, then the material enters the Vacuum Conveyor module, and the incoming negative
pressure air is cleaned as it enters through the vacuum filter. The clean air enters the Vacuum Pump
which is exhausted out through the exhaust port. All of these functions are controlled by the Control
Box.
Control Box
Vacuum Pump
Specifications subject to change without notice
Vacuum Filter
Feed Station + Pipe Line
www.vmeca.com
VACUUM CONVEYOR
The principle of VMECA Conveyor.
1.
2.
3.
4.
5.
6.
7.
(D) Hopper Door closes
(A) Vacuum Pump starts
(H) Shock Tank air energizes
Material transfers
(A) Vacuum Pump stops
(H) Shock Tank discharges
(D) Hopper Door opens – Releases Product
A
A.
B.
C.
D.
E.
F.
G.
H.
I.
H
G
I
Vacuum Pump
Hopper Cone
Actuator
Hopper Door
Pipeline
Feed Station
Filter
Air Shock Tank
Control Box
B
C
D
E
Manual injection valve
(Hand valve)
F
Automatic injection valve
(by pneumatic timer)
Specifications subject to change without notice
www.vmeca.com
VACUUM CONVEYOR
FLUIDIZATION
Fluidization is necessary for materials that has a poor flowing capacity. The Fluidization works
by shooting air into a hopper cone which has small porous openings(similar to a vacuum
filter). This air passes through these porous openings allowing the materials inside the
conveyor to fully dump.
FEED NOZZLE
The Feed Nozzle allows the operator to transport the material. It is adjustable by
allowing air to flow in with the material.
This will create a smooth flow of materials giving it a good air to material ratio to
prevent clogging in the pipelines.
Specifications subject to change without notice
www.vmeca.com
VACUUM CONVEYOR
Injection Valve
An Injection Valve is necessary when there is a 90 degree turn. The reason for this is because,
if the material is transferred and drops down to the bottom, it runs into dangers of clogging
the pipeline. In order to prevent this, an injection valve must be installed near the bend to
allow the atmospheric air to come in and discharge the pipeline of any build ups.
1
2
4
3
1 and 2 = Without the Injection Valve
3 and 4 = With the Injection Valve Installed
Specifications subject to change without notice
www.vmeca.com
VACUUM CONVEYOR
Vacuum Conveyor
Model No?
3M
4M
1.2 t/h
4M
How to select a standard conveyor?
(Example) The sugar company needs to convey 1.2tons of granulated sugar per hour up to a mixer where
the sugar is mixed with cacao powder. The mixer is located 11 meters from the Feed station.
Example)
VMECA vacuum conveyor “VTC 400” will be the best choice when the Pr = 10 ~ 20 in this Example,
The power requirement (Pr) of the applications is the same as the customer’s capacity requirement.
Hear the Pr figure, which is the product of capacity and conveying distance, is calculated.
▶ Material : granulated sugar
▶ Capacity : C= 1.2 ton/hour
▶ Vertical conveying distance : Lv = 3 meters
▶ Horizontal conveying distance : L = 4 + 4 = 8 meters
▶ Total conveying distance : L = Lv + L = 3 + 8 = 11 meters
▶ Characteristics of granulated sugar :
- Bulk density B = 0.8 ton/m3
- Particle size P = 0.2 mm
- The sugar is a free flowing product.
Pr=CXL=1.2X11=13.2
(Pr : Power requirement)
VMECA vacuum conveyor “VTC 400” will be the best choice when the Pr = 10 ~ 20 in this Example,
To check)
▶ Bulk density, B = 0.8 ton/m3 ( 0.5 < B < 18 ) OK!
▶ Total conveying distance, L = 11m, ( 4 < L < 30 ) OK!
▶ Particle size, P = 0.2mm ( P < 5mm ) OK!
Note)
The above is only a suggestion in order to facilitate the choice of conveyor. There are many
applications in the market, some with higher and some with lower values than the values mentioned here.
Therefore, please contact VMECA for more detailed product information.
Specifications subject to change without notice
www.vmeca.com
VACUUM CONVEYOR
Series VTC 100 ..
Supply air pressure : 4 ~ 6 bar (Max 7bar)
(58 ~ 87 psi, Max 101.5 psi)
Air consumption
Noise level
Steel Material
Sealing Material
Filter Material
: 280 ~ 416 Nl/min
(9.88 ~ 14.7 scfm)
: 68 ~ 76 dBA
: SUS304 / SUS316L
: Silicone
: Electrically conductive polyester
with PTFE membrane
Ordering information
√ Please contact VMECA for ATEX approval conveyor.
VTC 100 L – C2 - AC B A – M – 316L
① Vacuum Pump
① ②
③
④ ⑤⑥
⑦
⑧
② Filtration Area
● 100 : Vacuum Pump with Free flow exhaust duct (standard)
100 CP : Vacuum Pump with Concentration exhaust port
No mark - Standard
●
L
- Extra large
③Filter
●
B : Bag Filter – Filtering capacity (5µ)
B2 : Bag Filter – Filtering capacity (0.5µ )
C2 : Cartridge Filter – Polyester fleece with
PTFE membrane (0.2~0.5µ )
④ Control Unit
●
AC –Pneumatic Control (Plastic Case)
- Running time adjustable (0.1~30s)
- Discharge time adjustable (0.1~30s)
- Delay period adjustable (0.1~30s)
AC2- Pneumatic Control
- Running time adjustable (0.1~30s)
- Discharge time adjustable (0.1~30s)
AC3–Pneumatic Control (Stainless Steel Case))
- Running time adjustable (0.1~30s)
- Discharge time adjustable (0.1~30s)
- Delay period adjustable (0.1~30s)
- IP65 (Box Protection Grade)
EC - Electric Control
- Running time adjustable
- Discharge time adjustable
- Auto / Manual mode
- Level control available
Specifications subject to change without notice
⑤ Blowing
● B –Blowing Gear attached
No mark – Not attached
⑥ Injection valve
●
A
- Attached
No mark – Not attached
⑦ Mounting Option
● M –Flange Mount
No mark – Not attached
⑧Material
No mark – Standard(SUS304)
● 316L – SUS316L
www.vmeca.com
VACUUM CONVEYOR
Specification
MODEL
Power
Requirement
(Pr)
Filter
Surface
(m2 )
Capacity ton/h at
Different
Conveying distance
Max.
Conveying
Capacity
(ton/h)
8M
13M
23M
33M
Rec.
Material
Pipe
Dimension
(mm)
Rec.
Material
Volume
(l/cycle)
Weight
(Kg)
23
VTC100
3~6
0.12
0.9
0.9
0.64
0.48
0.36
32 / 42
4
VTC100L
3~6
0.2
0.9
0.9
0.64
0.48
0.36
32 / 42
4
Remark) 1. Above data based on actual test result of sugar which is specific gravity 0.85 in vertical 3m with 2 bends
2. The data can be changed according to the condition such as supply air flow, air pressure and condition of
pipe line (bending) when conveyor is operating.
Dimension
VTC100…
Specifications subject to change without notice
VTC100 L …
www.vmeca.com
VACUUM CONVEYOR
Series VTC 200 ..
Supply air pressure : 4 ~ 6 bar (Max 7bar)
(58 ~ 87 psi, Max 101.5 psi)
Air consumption
Noise level
Steel Material
Sealing Material
Filter Material
: 560 ~ 832 Nl/min
(19.8 ~ 29.3 scfm)
: 68 ~ 76 dBA
: SUS304 / SUS316L
: Silicone
: Electrically conductive polyester
with PTFE membrane
Ordering information
√ Please contact VMECA for ATEX approval conveyor.
VTC 200 L – C2 - AC B A – M – 316L
① Vacuum Pump
① ②
③
④ ⑤⑥ ⑦
⑧
② Filtration Area
● 200 : Vacuum Pump with Free flow exhaust duct (standard)
200 CP : Vacuum Pump with Concentration exhaust port
No mark - Standard
●
L
- Extra large
③Filter
●
B : Bag Filter – Filtering capacity (5µ)
B2 : Bag Filter – Filtering capacity (0.5µ )
C2 : Cartridge Filter – Polyester fleece with
PTFE membrane (0.2~0.5µ )
④ Control Unit
●
AC –Pneumatic Control (Plastic Case)
- Running time adjustable (0.1~30s)
- Discharge time adjustable (0.1~30s)
- Delay period adjustable (0.1~30s)
AC2- Pneumatic Control
- Running time adjustable (0.1~30s)
- Discharge time adjustable (0.1~30s)
AC3–Pneumatic Control (Stainless Steel Case))
- Running time adjustable (0.1~30s)
- Discharge time adjustable (0.1~30s)
- Delay period adjustable (0.1~30s)
- IP65 (Box Protection Grade)
EC - Electric Control
- Running time adjustable
- Discharge time adjustable
- Auto / Manual mode
- Level control available
Specifications subject to change without notice
⑤ Blowing
● B –Blowing Gear attached
No mark – Not attached
⑥ Injection valve
●
A
- Attached
No mark – Not attached
⑦ Mounting Option
● M –Flange Mount
No mark – Not attached
⑧Material
No mark – Standard(SUS304)
● 316L – SUS316L
www.vmeca.com
VACUUM CONVEYOR
Specification
Capacity ton/h at
Different
Conveying distance
Rec.
Material
Volume
(l/cycle)
Weight
(Kg)
33M
Rec.
Material
Pipe
Dimension
(mm)
0.72
0.48
42 / 51
4
24
0.72
0.48
42 / 51
4
Power
Requirement
(Pr)
Filter
Surface
(m2 )
Max.
Conveying
Capacity
(ton/h)
8M
13M
23M
VTC200
5 ~ 10
0.12
1.5
1.5
1.1
VTC200L
5 ~ 10
0.2
1.5
1.5
1.1
MODEL
Remark) 1. Above data based on actual test result of sugar which is specific gravity 0.85 in vertical 3m with 2 bends
2. The data can be changed according to the condition such as supply air flow, air pressure and condition of
pipe line (bending) when conveyor is operating.
Dimension
VTC200…
Specifications subject to change without notice
VTC200 L …
www.vmeca.com
VACUUM CONVEYOR
Series VTC 400 ..
Supply air pressure : 4 ~ 6 bar (Max 7bar)
(58 ~ 87 psi, Max 101.5 psi)
Air consumption
Noise level
Steel Material
Sealing Material
Filter Material
: 1120 ~ 1600 Nl/min
(39.5 ~ 56.5 scfm)
: 68 ~ 76 dBA
: SUS304 / SUS316L
: Silicone
: Electrically conductive polyester
with PTFE membrane
Ordering information
√ Please contact VMECA for ATEX approval conveyor.
VTC 400 L – C2 - AC B A – M – 316L
① Vacuum Pump
① ②
③
④ ⑤⑥ ⑦
⑧
② Filtration Area
● 400 : Vacuum Pump with Free flow exhaust duct (standard)
400 CP : Vacuum Pump with Concentration exhaust port
No mark - Standard
L
●
- Extra large
③Filter
●
B : Bag Filter – Filtering capacity (5µ)
B1 : Bag Filter – Filtering capacity (0.5µ )
C2 : Cartridge Filter – Polyester fleece with
PTFE membrane (0.2~0.5µ )
④ Control Unit
●
AC –Pneumatic Control (Plastic Case)
- Running time adjustable (0.1~30s)
- Discharge time adjustable (0.1~30s)
- Delay period adjustable (0.1~30s)
AC2- Pneumatic Control
- Running time adjustable (0.1~30s)
- Discharge time adjustable (0.1~30s)
AC3–Pneumatic Control (Stainless Steel Case))
- Running time adjustable (0.1~30s)
- Discharge time adjustable (0.1~30s)
- Delay period adjustable (0.1~30s)
- IP65 (Box Protection Grade)
EC - Electric Control
- Running time adjustable
- Discharge time adjustable
- Auto / Manual mode
- Level control available
Specifications subject to change without notice
⑤ Blowing
● B –Blowing Gear attached
No mark – Not attached
⑥ Injection valve
●
A
- Attached
No mark – Not attached
⑦ Mounting Option
● M –Flange Mount
No mark – Not attached
⑧Material
No mark – Standard(SUS304)
● 316L – SUS316L
www.vmeca.com
VACUUM CONVEYOR
Specification
Capacity ton/h at
Different
Conveying distance
Rec.
Material
Volume
(l/cycle)
Weight
(Kg)
33M
Rec.
Material
Pipe
Dimension
(mm)
0.9
0.5
42 / 51
4
24
0.9
0.5
42 / 51
4
Power
Requirement
(Pr)
Filter
Surface
(m2 )
Max.
Conveying
Capacity
(ton/h)
8M
13M
23M
VTC400
10 ~ 20
0.2
2.2
2.2
1.4
VTC400L
10 ~ 20
0.29
2.2
2.2
1.4
MODEL
Remark) 1. Above data based on actual test result of sugar which is specific gravity 0.85 in vertical 3m with 2 bends
2. The data can be changed according to the condition such as supply air flow, air pressure and condition of
pipe line (bending) when conveyor is operating.
Dimension
VTC400…
Specifications subject to change without notice
VTC400 L …
www.vmeca.com
VACUUM CONVEYOR
Series VTC 600 ..
Supply air pressure : 4 ~ 6 bar (Max 7bar)
(58 ~ 87 psi, Max 101.5 psi)
Air consumption
Noise level
Steel Material
Sealing Material
Filter Material
: 1800 ~ 2520 Nl/min
(63.56 ~ 89 scfm)
: 68 ~ 76 dBA
: SUS304 / SUS316L
: Silicone
: Electrically conductive polyester
with PTFE membrane
Ordering information
√ Please contact VMECA for ATEX approval conveyor.
VTC 600 L – C2 - AC B A – M – 316L
① Vacuum Pump
① ②
③
④ ⑤⑥
⑦
⑧
② Filtration Area
● 600 : Vacuum Pump with Free flow exhaust duct (standard)
600 CP : Vacuum Pump with Concentration exhaust port
No mark - Standard
●
L
- Extra large
③Filter
●
B : Bag Filter – Filtering capacity (5µ)
B1 : Bag Filter – Filtering capacity (0.5µ )
C2 : Cartridge Filter – Polyester fleece with
PTFE membrane (0.2~0.5µ )
④ Control Unit
●
AC –Pneumatic Control (Plastic Case)
- Running time adjustable (0.1~30s)
- Discharge time adjustable (0.1~30s)
- Delay period adjustable (0.1~30s)
AC2- Pneumatic Control
- Running time adjustable (0.1~30s)
- Discharge time adjustable (0.1~30s)
AC3–Pneumatic Control (Stainless Steel Case))
- Running time adjustable (0.1~30s)
- Discharge time adjustable (0.1~30s)
- Delay period adjustable (0.1~30s)
- IP65 (Box Protection Grade)
EC - Electric Control
- Running time adjustable
- Discharge time adjustable
- Auto / Manual mode
- Level control available
Specifications subject to change without notice
⑤ Blowing
● B –Blowing Gear attached
No mark – Not attached
⑥ Injection valve
●
A
- Attached
No mark – Not attached
⑦ Mounting Option
● M –Flange Mount
No mark – Not attached
⑧Material
No mark – Standard(SUS304)
● 316L – SUS316L
www.vmeca.com
VACUUM CONVEYOR
Specification
Capacity ton/h at
Different
Conveying distance
Rec.
Material
Pipe
Dimensio
n
(mm)
Rec.
Material
Volume
(l/cycle)
Weight
(Kg)
Power
Requirement
(Pr)
Filter
Surface
(m2 )
Max.
Conveying
Capacity
(ton/h)
VTC600
15 ~ 25
0.2X4
4.0
4.0
2.0
1
0.6
74/101
18
44
VTC600L
15 ~ 25
0.46X4
4.0
4.0
2.0
1
0.6
74/101
18
57
MODEL
8M
13M
23M
33M
Remark) 1. Above data based on actual test result of sugar which is specific gravity 0.85 in vertical 3m with 2 bends
2. The data can be changed according to the condition such as supply air flow, air pressure and condition of
pipe line (bending) when conveyor is operating.
Dimension
VTC600…
Specifications subject to change without notice
VTC600 L …
www.vmeca.com
VACUUM CONVEYOR
Series VTC 800 ..
Supply air pressure : 4 ~ 6 bar (Max 7bar)
(58 ~ 87 psi, Max 101.5 psi)
Air consumption
Noise level
Steel Material
Sealing Material
Filter Material
: 2400 ~ 3360 Nl/min
(84.75 ~ 118.65 scfm)
: 68 ~ 76 dBA
: SUS304 / SUS316L
: Silicone
: Electrically conductive polyester
with PTFE membrane
Ordering information
√ Please contact VMECA for ATEX approval conveyor.
VTC 800 L – C2 - AC B A – M – 316L
① Vacuum Pump
① ②
③
④ ⑤⑥
⑦
⑧
② Filtration Area
● 800 : Vacuum Pump with Free flow exhaust duct (standard)
800 CP : Vacuum Pump with Concentration exhaust port
No mark - Standard
L
●
- Extra large
③Filter
●
B : Bag Filter – Filtering capacity (5µ)
B1 : Bag Filter – Filtering capacity (0.5µ )
C2 : Cartridge Filter – Polyester fleece with
PTFE membrane (0.2~0.5µ )
④ Control Unit
●
AC –Pneumatic Control (Plastic Case)
- Running time adjustable (0.1~30s)
- Discharge time adjustable (0.1~30s)
- Delay period adjustable (0.1~30s)
AC2- Pneumatic Control
- Running time adjustable (0.1~30s)
- Discharge time adjustable (0.1~30s)
AC3–Pneumatic Control (Stainless Steel Case))
- Running time adjustable (0.1~30s)
- Discharge time adjustable (0.1~30s)
- Delay period adjustable (0.1~30s)
- IP65 (Box Protection Grade)
EC - Electric Control
- Running time adjustable
- Discharge time adjustable
- Auto / Manual mode
- Level control available
Specifications subject to change without notice
⑤ Blowing
● B –Blowing Gear attached
No mark – Not attached
⑥ Injection valve
●
A
- Attached
No mark – Not attached
⑦ Mounting Option
● M –Flange Mount
No mark – Not attached
⑧Material
No mark – Standard(SUS304)
● 316L – SUS316L
www.vmeca.com
VACUUM CONVEYOR
Specification
Capacity ton/h at
Different
Conveying distance
Rec.
Material
Volume
(l/cycle)
Weight
(Kg)
33M
Rec.
Material
Pipe
Dimension
(mm)
1.4
1.0
74/101
18
45
1.4
1.0
74/101
18
58
Power
Requirement
(Pr)
Filter
Surfac
e
(m2 )
Max.
Conveying
Capacity
(ton/h)
8M
13M
23M
VTC800
20 ~ 40
0.2X4
5.5
5.5
2.8
VTC800L
20 ~ 40
0.46X4
5.5
5.5
2.8
MODEL
Remark) 1. Above data based on actual test result of sugar which is specific gravity 0.85 in vertical 3m with 2 bends
2. The data can be changed according to the condition such as supply air flow, air pressure and condition of
pipe line (bending) when conveyor is operating.
Dimension
VTC800…
Specifications subject to change without notice
VTC800 L …
www.vmeca.com
VACUUM CONVEYOR
Series VTC 1000 ..
Supply air pressure : 4 ~ 6 bar (Max 7bar)
(58 ~ 87 psi, Max 101.5 psi)
Air consumption
Noise level
Steel Material
Sealing Material
Filter Material
: 3000 ~ 4140 Nl/min
(105.94 ~ 146.2 scfm)
: 68 ~ 76 dBA
: SUS304 / SUS316L
: Silicone
: Electrically conductive polyester
with PTFE membrane
Ordering information
√ Please contact VMECA for ATEX approval conveyor.
VTC 1000 L – C2 - AC B A – M – 316L
① Vacuum Pump
① ②
③
④ ⑤⑥ ⑦
⑧
② Filtration Area
● 1000 : Vacuum Pump with Free flow exhaust duct (standard)
1000 CP : Vacuum Pump with Concentration exhaust port
No mark - Standard
L
●
- Extra large
③Filter
●
B : Bag Filter – Filtering capacity (5µ)
B1 : Bag Filter – Filtering capacity (0.5µ )
C2 : Cartridge Filter – Polyester fleece with
PTFE membrane (0.2~0.5µ )
④ Control Unit
●
AC –Pneumatic Control (Plastic Case)
- Running time adjustable (0.1~30s)
- Discharge time adjustable (0.1~30s)
- Delay period adjustable (0.1~30s)
AC2- Pneumatic Control
- Running time adjustable (0.1~30s)
- Discharge time adjustable (0.1~30s)
AC3–Pneumatic Control (Stainless Steel Case))
- Running time adjustable (0.1~30s)
- Discharge time adjustable (0.1~30s)
- Delay period adjustable (0.1~30s)
- IP65 (Box Protection Grade)
EC - Electric Control
- Running time adjustable
- Discharge time adjustable
- Auto / Manual mode
- Level control available
Specifications subject to change without notice
⑤ Blowing
● B –Blowing Gear attached
No mark – Not attached
⑥ Injection valve
●
A
- Attached
No mark – Not attached
⑦ Mounting Option
● M –Flange Mount
No mark – Not attached
⑧Material
No mark – Standard(SUS304)
● 316L – SUS316L
www.vmeca.com
VACUUM CONVEYOR
Specification
Capacity ton/h at
Different
Conveying distance
Power
Requirement
(Pr)
Filter
Surface
(m2 )
Max.
Conveying
Capacity
(ton/h)
8M
13M
23M
VTC1000
25 ~ 50
0.46X4
7.0
7.0
3.7
VTC1000L
25 ~ 50
0.75X4
7.0
7.0
3.7
MODEL
Rec.
Material
Volume
(l/cycle)
Weight
(Kg)
33M
Rec. Material
Pipe
Dimension
(mm)
1.8
1.2
74/101
18
48
1.8
1.2
74/101
18
61
Remark) 1. Above data based on actual test result of sugar which is specific gravity 0.85 in vertical 3m with 2 bends
2. The data can be changed according to the condition such as supply air flow, air pressure and condition of
pipe line (bending) when conveyor is operating.
Dimension
VTC1000…
Specifications subject to change without notice
VTC1000 L …
www.vmeca.com
VACUUM CONVEYOR
Series VTC 1200 ..
Supply air pressure : 4 ~ 6 bar (Max 7bar)
(58 ~ 87 psi, Max 101.5 psi)
Air consumption
Noise level
Steel Material
Sealing Material
Filter Material
: 3600 ~ 4920 Nl/min
(127.13 ~ 173.74 scfm)
: 68 ~ 76 dBA
: SUS304 / SUS316L
: Silicone
: Electrically conductive polyester
with PTFE membrane
Ordering information
√ Please contact VMECA for ATEX approval conveyor.
VTC 1200 L – C2 - AC B A – M – 316L
① Vacuum Pump
① ②
③
④ ⑤⑥ ⑦
⑧
② Filtration Area
● 1200 : Vacuum Pump with Free flow exhaust duct (standard)
1200 CP : Vacuum Pump with Concentration exhaust port
No mark - Standard
●
L
- Extra large
③Filter
●
B : Bag Filter – Filtering capacity (5µ)
B1 : Bag Filter – Filtering capacity (0.5µ )
C2 : Cartridge Filter – Polyester fleece with
PTFE membrane (0.2~0.5µ )
④ Control Unit
●
AC –Pneumatic Control (Plastic Case)
- Running time adjustable (0.1~30s)
- Discharge time adjustable (0.1~30s)
- Delay period adjustable (0.1~30s)
AC2- Pneumatic Control
- Running time adjustable (0.1~30s)
- Discharge time adjustable (0.1~30s)
AC3–Pneumatic Control (Stainless Steel Case))
- Running time adjustable (0.1~30s)
- Discharge time adjustable (0.1~30s)
- Delay period adjustable (0.1~30s)
- IP65 (Box Protection Grade)
EC - Electric Control
- Running time adjustable
- Discharge time adjustable
- Auto / Manual mode
- Level control available
Specifications subject to change without notice
⑤ Blowing
● B –Blowing Gear attached
No mark – Not attached
⑥ Injection valve
●
A
- Attached
No mark – Not attached
⑦ Mounting Option
● M –Flange Mount
No mark – Not attached
⑧Material
No mark – Standard(SUS304)
● 316L – SUS316L
www.vmeca.com
VACUUM CONVEYOR
Specification
Capacity ton/h at
Different
Conveying distance
Power
Requirement
(Pr)
Filter
Surface
(m2 )
Max.
Conveying
Capacity
(ton/h)
8M
13M
23M
VTC1200
30 ~ 60
0.46X4
8.5
8.5
4.3
VTC1200L
30 ~ 60
0.75X4
8.5
8.5
4.3
MODEL
Rec.
Material
Volume
(l/cycle)
Weight
(Kg)
33M
Rec. Material
Pipe
Dimension
(mm)
2.1
1.5
74/101
18
50
2.1
1.5
74/101
18
63
Remark) 1. Above data based on actual test result of sugar which is specific gravity 0.85 in vertical 3m with 2 bends
2. The data can be changed according to the condition such as supply air flow, air pressure and condition of
pipe line (bending) when conveyor is operating.
Dimension
VTC1200…
Specifications subject to change without notice
VTC1200 L …
www.vmeca.com
VACUUM CONVEYOR
Accessories
Vacuum Filters (Cartridge Filter)
Material
: Electrically Conductive Polyester
with PTFE membrane
Temperature, Max : 70°C
Min particle size : 0.2 ~ 0.5 ㎛
Filter Seal
: Silicon
Food quality
size
: ø160XL150 / Ø160XL250 / ø160XL350
ø160XL550 / ø160XL900
Bag Filter
Material
: TFE coated antistatic needle Felt of
polyester / carbon fibers
Temperature, Max : 80°C
Min particle size : 0.5㎛ / 5㎛
Filter Seal
: Silicon
Washable 2 to 4 times in 40℃
Food quality
Size
: Ø150X L150 / Ø150X L250 / Ø150X L350
Ø150X L550 / Ø150X L900
Vacuum Filter
Material
Temperature, Max
Filter Seal
Pressure range
Specifications subject to change without notice
: PA66, PC, PE
: 100°C
: NBR
: Vacuum only
www.vmeca.com
VACUUM CONVEYOR
Accessories
Control Unit
Pneumatic (AC)
.
.
.
.
(Plastic Case)
Running time adjustable (0.1~30S)
Discharge time adjustable (0.1~30S)
Delay period adjustable (0.1~30S)
Material : PC,ABS,AL,BS,NBR
Pneumatic (AC2)
. Running time adjustable (0.1~30S)
. Discharge time adjustable (0.1~30S)
. Material : PC,ABS,AL,BS
Pneumatic (AC3)
.
.
.
.
(Stainless Steel Case)
Running time adjustable (0.1~30S)
Discharge time adjustable (0.1~30S)
Delay period adjustable (0.1~30S)
Material : PC,ABS,AL,BS,NBR
Electrical (EC)
. Running time adjustable
.
.
.
.
.
Discharge time adjustable
Auto / Manual mode
Level control
Voltage : 220V
Material : PC,ABS,AL,BS
Specifications subject to change without notice
www.vmeca.com
VACUUM CONVEYOR
Accessories
Pipe Fitting
Material : Silicon, SUS304
Working Temp : -40°C ~ +200°C
Dimension
MODEL
D
d
D2
L
CF 5151
51
[2.007]
-
79
[3.11]
110
[4.33]
CF 3232
32
[1.257]
-
50
[1.968]
82
[3.228]
CF 1076
101.7
[4]
76.1
[3]
138
[5.433]
150
[5.9]
CF 7651
76.1
[3]
51
[2.007]
112.5
[4.43]
130
[5.12]
CF 5140
51
[2.007]
40
[1.574]
79
[3.11]
110
[4.33]
CF 4032
40
[1.574]
32
[1.259]
64
[2.519]
98
[3.858]
CF 3222
32
[1.259]
22
[0.866]
50
[1.968]
82
[3.228]
CF 513Y
51
[2.007]
-
-
181
[7.125]
CF 323Y
32
[1.259]
-
-
133
[5.236]
D2
D
d
D2
D
L
L
D
D
D
Mm
[inch]
Ø [inch]
L
Specifications subject to change without notice
www.vmeca.com
VACUUM CONVEYOR
Accessories
■ Feed Nozzle
●
●
Adjustable clearance of suction point
Material : SUS304 (316L), MC Nylon, Al
Dimension
Ø [inch]
MODEL
Mm [inch]
L1
L2
VCFN 32
32
[1.259]
32
[1.259]
51
[2.007]
940~1.005
[37~39.56]
852
[33.5]
VCFN 40
42.8
[1.685]
42.8
[1.685]
63.5
[2.5]
965~1.035
[38~40.74]
855
[33.6]
VCFN 50
51
[2.007]
42.8
[1.685]
63.5
[2.5]
965~1.035
[38~40.74]
855
[33.6]
VCFN 100
101.6
[4]
76.3
[3.003]
101.6
[4]
1,575~1,665
[62~65.5]
1,290
[50.8]
D1
D3
D2
D2
D3
D1
L2
L1
Specifications subject to change without notice
www.vmeca.com
VACUUM CONVEYOR
From Acetylsalicylic acid to Wheat grains
" Some examples of products we have tested successfully"
Specifications subject to change without notice
www.vmeca.com
VACUUM CONVEYOR
How to select the suitable vacuum conveyor
The points of considered in choosing a Conveyor System
Let us be the one to assist you on your next project.
When selecting the size of the Conveyor System, you need to
take into consideration of the distance* of which the material
needs to travel. *Distance: the Height plus Width.
You need to know the specifications of the dried material for
which will be conveyed. The specification includes fluidity, bulk
density, abrasion factor, particle size, moisture sensitivity,
explosion hazard, harmfulness, etc.
How you would like to load and unload the dried material into the
Conveyor System. If you were going to extract the dried material
from a tank or a bag, would you need the use of a feed nozzle?
Or would you need an automatic feeder from the storage tank?
How would you attach the connection part that does the suction
of the dried material to the conveyor? Will the pipe be flexible or
fixed in its location of where the dried material will pass?
Transporting materials, as well as additional attributes of
environmental conditions by using a vacuum conveyor system
will determine the exact specifications. Does the dried material
have a good fluidity or not? What is flow-ability of the dried
material? Is it free flowing, or bridging? Do you need a
Fluidization system for your material? Are the materials sensitive
to moisture? Would there be a possibility of the line clogging?
Would the materials change characteristics as it is being
transported? (In the process of transferring smaller particle
materials with friction) Would there be a chance of 2 different
materials separating when suction occurs? Are there any
precautions to prevent the material being damaged and
scratched while the conveyor works?
Specifications subject to change without notice
Explosion may occur during conveying of materials are
commonly caused by sparks from static electricity. Prevention
methods are available. Does the material have harmful or
toxic in any way? How many people are exposed to the
product? Can it cause allergic reaction? What filter size would
you like? Would the dried materials promote air pollution?
Would your Conveyor System need a central exhaust port?
Would you like to recycle the excess material or send it to the
outside air? Would the dried materials generate an explosive
nature? Are there any things that would restrict the suction
and hopper point?
Let us be the one to assist you on your next project.
We contribute to the efficient operation and profitability of the
production process to eliminate any unnecessary risks to
make a safer environment. We would like to be the one to
satisfy your needs for the vacuum conveyor application. We
are always working in order to give you the maximum benefit
through our Vacuum Conveyer System.
Please contact VTEC/ VMECA if you need any further
information or consulting for your application.
www.vmeca.com
VMECA
Vacuum Conveyor
VMECA
Vacuum Conveyor
............. VMECA Vacuum Conveying System ..............
www.vmeca.com
USA /
GERMANY /
ASIA /
VMECA GmbH
VMECA
VtecUSA Inc.
Gutenberg Strasse 20
D-70794 Filderstadt, Germany
Phone: +49-711-4408-3260
Fax: +49-711-4408-3261
Web: www.vmeca.com
Email: vtec@vmeca.com
501-5 Doksan-1dong
Geumchon-gu Seoul 153817, Korea
Tel: +82-2-2617-5008 (Rep.)
Fax: +82-2-2617-5009
Web : www.vmeca.com
Email: vmeca@vmeca.com
1305 San Gabriel Blvd., Suite 203
Rosemead, CA 91770
Tel: +1-213-258-7114 (Rep.)
Fax: +1-626-569-9978
Web : www.vmeca.com
Email: infousa@vmeca.com
Distributor
•
•
•
•
•
•
•
Argentina
Canada
Egypt
Iran
Malaysia
Philippines
Taiwan
• Australia
• China
• France
• Israel
• Mexico
• Poland
• Thailand
• Austria
• Colombia
• Hungary
• Italy
• Netherlands
• Spain
• Turkey
• Belgium
• Czech
• India
• Japan
• New Zealand
• Sweden
• UK
• Brazil
• Denmark
• Indonesia
• Lebanon
• Norway
• Switzerland
www.vmeca.com
Download PDF
Similar pages