﹥﹥Industrial Ethernet Switches
IES308-1F
7-port 10/100M Ethernet+ 1-port 100Base-FX (SC/ST/FC)
Unmanaged Industrial Ethernet Switch
Features
Advanced Ethernet switch technical
IEEE802.3/802.3u/802.3x/802.3d,store and forward
Support 7-port 10/100M Ethernet and 1-port 100Base-FX(SC/ST/FC)
Plug-and-play, 10/100M, F/H duplex, MDI/MDI-X auto negotiation
Broadcast storm protection
Relay output warning for power failure and port break alarm
Redundant 24VDC power input(12V 48VDC)
-40~75°C working temperature
Designed for industrial applications
IP30 protection, rugged high-strength metal case
Introduction
IES308-1F series are a smart plug-and-play industrial Ethernet switch,
harsh and dangerous environment.
which can provide economical solution for your Ethernet. Its dustproof
IES308-1F support 7 TP ports and 1 optic port, TP(RJ45)
fully sealed structure(pr protective case of IP30 level), over-current,
Support 10/100Base-T(X), Full/Half duplex mode, and auto
over-voltage and EMC protected redundant double power input as well
MDI/MDI-X connection.100BaseFX ports supports single/multi
as built-in intelligent alarm design can help system main tenancy
mode, SC/ST connector, optional.
personnel monitor the network operation, which can work reliably in
Specification
Technology
Multi-mode: 1310nm, 2Km
Standard: Support IEEE802.3, IEEE802.3u, IEEE802.3x
Single-mode: 1310nm, 20/40/60Km
Flow control: IEEE802.3x flow control, back press flow control
1550nm, 80/100/120Km
Exchange attribute
LED indicator
100M forward speed: 148810pps
Run indicator: Run
Transmit mode: store and forward
Interface indicator: Link (1~8)
System exchange bandwidth: 1.6G
Power supply indicator: P1, P2
MAC address table: 2K
Alarm indicator: Alarm
Memory: 1M
Relay
Interface
Max voltage: DC30V
Electric port: 10Base-T/100Base-TX auto speed control, Half/full
Max power input: 1A@24VDC
duplex and MDI/MDI-X auto detect
100M optic fiber port: 100Base-FX, SC/ST/FC connector, support
Power supply
Input voltage: 12~48VDC
single mode (20/40/60/80Km optional), multi mode (2Km),
Type of input: 4 bit terminal block
wavelength: 1310nm, 1550nm
Support DC dual power supply redundancy
Alarm port: 2 bit terminal block, 1 channel relay alarm output
Support power and port alarm
Support overload Current Protection
Consumption
Transfer distance
No-load consumption: 1.7W@12VDC
Twisted cable: 100M (standard CAT5/CAT5e cable)
Full-load consumption: 3.1W@12VDC
1
﹥﹥Industrial Ethernet Switches
Working environment
EN61000-4-3 (RS), Level 3
Working temperature: -40
EN61000-4-4 (EFT), Level 4
75
Storage temperature: -4085
EN61000-4-5 (Surge), Level 4
Relative Humidity: 5%~95 %( no condensation)
EN61000-4-6 (CS), Level 3
Mechanical Structure
EN61000-4-8, Level 5
Shell: IP30 protect grade, metal shell
Shock: IEC 60068-2-27
Installation: DIN-Rail mounting
Free fall: IEC 60068-2-32
Weight: 900g
Vibration: IEC 60068-2-6
Size (W×H×D): 53mm×136mm×105mm
Certification
Industry Standard
CE, FCC, RoHS, UL508 (Pending)
EMI: FCC Part 15, CISPR (EN55022) class A
Warranty: 5 years
EMS: EN61000-4-2 (ESD), Level 4
Double power supply input and relay output alarm
IES308 series can provide double power supply backup and 1-route
can support power supply and port link alarm. Relay can give out
relay alarm output. Redundant double DC power supply input
output alarm in case of power supply failure or interruption of port
can provide your equipment with uninterrupted
link to notice or remind site engineers to make quick response for
(12V
48VDC)
operation to further provide additional protection for normal
appropriate emergency maintenance
operation of automatic system. 1-route equipment alarm output signal
Dimension
Unit:mm
Ordering Information
IES308-1F (M): 7-port 10/100Baes-T(X) + 1-port 100Base-FX, Multi-mode, SC, ST, FC, optional, DC12-48V
IES308-1F (S): 7-port 10/100Baes-T(X) + 1-port 100Base-FX, Single-mode, SC, ST, FC, optional, DC12-48V
IES308-1F (SS): 7-port 10/100Baes-T(X) + 1-port 100Base-FX, Single-mode, single fiber, SC, ST, FC, optional, DC12-48V
2
﹥﹥Industrial Ethernet Switches
Packing List
1. Ethernet switch IES308-1F (plus terminal block)×1
2. User manual ×1
3. DIN-Rail fittings ×1
4
Download PDF
Similar pages