MOD5282
e t B u r n e r
Networking in 1 Day!
Features
• Companion development kit
includes all of the hardware
and software you will need to
develop embedded applications.
This includes an RTOS, TCP/IP,
Web Server, C/C++ Compiler, IDE,
Graphical Debugger, configuration and deployment tools.
• Start writing your application
code immediately, instead of
integrating development tools or
building custom hardware.
• Use as a high-performance single
board computer, or as a network
interface processor.
• Module supports 3 serial ports,
16 timers, address bus, data bus,
GPIO, A/D, CAN, SPI, I2C, interrupts, PWM and more.
• Integrated 66Mhz 32-bit Coldfire
5282 processor with integrated
10/100 Ethernet and MAC.
• 8MB SDRAM, 512K of Flash
Memory.
• Temperature Range:
-40°C to +85° C.
MOD5282
NetBurner’s High Performance
Embedded Network Core Module
Overview
The MOD5282 processor modules are low cost, high performance single board computers that are excellent solutions to network-enable both existing and new product designs
with 10/100BaseT Ethernet. Based on the Freescale ColdFire 5282 32-bit processors with
integrated 10/100 Ethernet MAC, they have plenty of horsepower for the most demanding
applications (rated at 60+MIPS with 66MHz clock).
Network-Enable New or Existing Applications
Add a module to an existing application, network enable your device though its serial
ports, GPIO pins, or serial bit streams. If you have an application-specific motherboard,
you can add a module and have a powerful processing platform that can function as the
control processor for your product, or as a low cost network interface processor.
Customize to Suit Any Application
The NetBurner Network Development Kit enables you to quickly and easily create custom
applications. NetBurner has a solid reputation for development platforms to facilitate
rapid product development, and the module kits are no exception. The kit includes the
MOD5282 module, development board, TCP/IP Stack, uC/OS Real-time operating system,
Web Server, GNU C/C++ compiler and linker, GDB graphical debugger, end-user device
configuration, flash update utilities, and much more.
Real 32-Bit Performance
Traditionally, companies using 8 and 16-bit platforms find it nearly impossible to run
resource-intensive applications on fast Ethernet connections. The NetBurner Embeded
Network Core Module features a Web-based control interface, a full 32-bit architecture
providing 60+ MIPS, and the ability to send and receive email. This processing platform
provides the horsepower to handle both 10/100 Ethernet connections and resource-demanding applications with ease and flexibility.
www.NetBurner.com NetBurner Datasheet MOD5282-A
MOD5282
Specifications
Part Numbers
Processor and Memory
32-bit Freescale ColdFire 5282 running at 66MHz with 8MB
SDRAM, 512KB Flash, and 64KB SRAM
NetBurner MOD5282 Development Kit
P/N: NNDK-MOD5282-KIT
Includes all the hardware and software you need to customize
the included NetBurner MOD5282 module. This kit includes the
NetBurner MOD-DEV-100 Carrier Board.
Flash Card Support
SD/MMC (up to 2GB), SDHC (16GB+) , Compact Flash (32GB+)
Software Development
NetBurner MOD5270 Development Kit includes
MOD5282 module, TCP/IP stack, Web Server, real-time operating system (RTOS), ANSI C/C++ compiler and linker, assembler,
graphical debugger, NetBurner Eclipse integrated development
environment (IDE), code update, configuration, and deployment
tools.
Network Interface & Serial Interfacees
10/100 BaseT with RJ-45 connector, 3 UARTS, I2C, SPI,
Up to50 Digital I/O
Network Protocols Supported
Please reference the NetBurner Software Datasheet for a complete list of the protocols included with the development kit
(www.NetBurner.com).
Connectors
Two dual row 50-pin male headers
Physical Characteristics
Dimensions: 2.0” x 2.6”
Mounting Holes: 2 x 0.125” dia
Note:
For more detailed diagrams please reference the MOD5282 Mechanical Drawing which can be found on the NetBurner MOD5282 Ethernet Core Module web
page.
Power
DC Input Voltage: 3.3V @500mA
Environmental Operating Temperature
-40°C to 85°C
NetBurner MOD5282 Ethernet Core Module
P/N: MOD5282-100IR
The MOD5282-100IR Module is a industrial temperature, RoHS
compliant part.
NetBurner MOD5282-200IR Ethernet Core Module
with 10-pin Ethernet Jack Header
P/N: MOD5282-200IR
The MOD5270 Board is a industrial temperature, RoHS compliant
part.
NetBurner Development Kit Support & Maintenance
Agreement Renewal
P/N: NBMAINT-100
Extends software updates, tools updates and email support for a
period of 1 year.
Note:
1. All NetBurner hardware produced after July of 2006 is RoHS compliant.
Ordering Information
E-mail: sales@netburner.com
Online Store: www.NetburnerStore.com
Telephone: 1-800-695-6828
MCF5282 Block Diagram
JTAG
BDM
8 ch
QADC
10/100
Ethernet
2 KB
I-Cache
DMA
I2C
UART
4 ch, 32-bit
Timer
QSPI
UART
8 ch, 16-bit
Timer
CAN
UART
4 ch PIT
512 KB Flash
64 KB RAM
eMAC
ColdFire®
V2 Core
DMA
Bus
Control
SDRAM
Chip Selects
Figure 2: Freescale ColdFire Block Diagram
e t B u r n e r
Networking in 1 Day!
Revision 1.0, April 4, 2006. © 2006 NetBurner, Inc. Specifications are subject to change without notice. Every effort
has been made to ensure all information is correct, but NetBurner, Inc. is not responsible for inadvertant errors.
Freescale(tm) and the Freescale logo are Note:
trademarks of Freescale Semiconductor, Inc. All other product or service
MOD5282
is based on
the Freescale ColdFire
5282 processor. For addinames are the property of their respectiveThe
owners.
(c) Freescale
Semiconductor,
Inc. 2006
tional processor specific information please reference the Freescale Coldfire
5282 Manual.
www.NetBurner.com NetBurner Datasheet MOD5282-B
MOD5282
Ethernet Jack Pinout and Signal
Description (200 version module)
The MOD5282-200IR version NetBurner Ethernet Core Module
has a 10-pin header which enables you to connect to your own
Ethernet jack.
Table 2: Module Ethernet 10- Pin Dual Row Header Pinout
and Signal Descriptions
Pin
1
2
3
4
5
6
7
8
9
10
Signal
TXTX+
VCC1
RX+
RXVCC1
GND
N/C
LED
LED
Description
Transmit Transmit +
2.5V
Recieve +
Recieve 2.5V
Ground
Not Connected
Link LED
Speed LED
Note:
1. The 2.5V pins are used for the magnetics taps and LED power.
e t B u r n e r
Revision 1.0, April 4, 2006. © 2006 NetBurner, Inc. Specifications are subject to change without notice. Every effort
has been made to ensure all information is correct, but NetBurner, Inc. is not responsible for inadvertant errors.
Freescale(tm) and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service
names are the property of their respective owners. (c) Freescale Semiconductor, Inc. 2006
Networking in 1 Day!
www.NetBurner.com NetBurner Datasheet MOD5282-B
MOD5282
MOD5282 Pinout and Signal Description
The MOD5282 module has two dual in-line 50 pin headers which enable you to quickly and easily connect to one of our standard
NetBurner Carrier Boards, or a board you create on your own. Table 1 and 2 provide descriptions of pin function of the MOD5282
header.
Table 1: NetBurner MOD5282 Pinout and Signal Connector (1) for J1 Connector
Pin
1
2
3
4
5
6
7
8
9
10
11
+2
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
CPU Pin
N15
L14
L15
L16
N16
M14
P16
J1 Connector
Function GPIO Description
GND
Ground
GND
Ground
VCC3V
Input Power 3.3V
R/*W
Read / NOT Write
*CS1
Chip Select 1
*CS2
Chip Select 2
*CS3
Chip Select 3
*OE
Output Enable
*BS2
Byte Strobe for D16 to D23 (8 bits)
*BS3
Byte Strobe for D24 to D31 (8 bits)
*TIP
Transfer in Progress
SYNCB
GP Timer B Synchronization Input
D16
Data Bus - Data 16
*TA
Transfer Acknowledge
D18
Data Bus - Data 18
D17
Data Bus - Data 17
D20
Data Bus - Data 20
D19
Data Bus - Data 19
D22
Data Bus - Data 22
D21
Data Bus - Data 21
D24
Data Bus - Data 24
D23
Data Bus - Data 23
D26
Data Bus - Data 26
D25
Data Bus - Data 25
D28
Data Bus - Data 28
D27
Data Bus - Data 27
D30
Data Bus - Data 30
D29
Data Bus - Data 29
*RSTI
Processor Reset Input
D31
Data Bus - Data 31
*RSTO
Processor Reset Output
CLKOUT
Clock Out (CLKOUT-66.355 Mhz)
A0
Data Bus - Address 0
A1
Data Bus - Address 1
A2
Data Bus - Address 2
A3
Data Bus - Address 3
A4
Data Bus - Address 4
A5
Data Bus - Address 5
A6
Data Bus - Address 6
A7
Data Bus - Address 7
A8
Data Bus - Address 8
A9
Data Bus - Address 9
A10
Data Bus - Address 10
A11
Data Bus - Address 11
A12
Data Bus - Address 12
A13
Data Bus - Address 13
A14
Data Bus - Address 14
A15
Data Bus - Address 15
VCC3V
Input power 3.3V
GND
Ground
GND
Ground
e t B u r n e r
•
•
•
•
•
Note:
1. Asterisk (*) denotes active low. All input/output lines are 3.3V
only.
2. Plus sign (+) denotes additional alternate pin function
•
•
Revision 1.0, April 4, 2006. © 2006 NetBurner, Inc. Specifications are subject to change without notice. Every effort
has been made to ensure all information is correct, but NetBurner, Inc. is not responsible for inadvertant errors.
Freescale(tm) and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service
names are the property of their respective owners. (c) Freescale Semiconductor, Inc. 2006
Networking in 1 Day!
www.NetBurner.com NetBurner Datasheet MOD5282-B
MOD5282
Table 2: NetBurner MOD5282 Pinout and Signal Descriptions (1) for J2 Connector
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
+1
30
31
+1
32
+1
33
+1
34
+1
35
36
+1
37
+1
38
+1
39
40
41
42
43
+1
44
45
+1
46
47
+1
48
+1
49
50
CPU Pin
T13
T12
R13
R12
P13
P12
R7
P7
N13
N12
F14
G14
F16
F13
K14
Function
GND
VCC3V
URXD0
UTXD0
ADVCC
AN3
AN1
AN2
AN56
AN0
AN53
AN52
AN55
GND
GPTA3
GPTB3
GPTA2
GPTB2
GPTA1
GPTB1
URXD1
UTXD1
GPTA0
GPTB0
SPI_CLK
SPI_CS3
SPI_DIN
SPI_DOUT
TIN2
F15
J14
SPI_CS0
TIN0
K15
DTOUT3
K13
DTOUT2
J15
DTOUT1
G13
J13
SPI_CS2
DTOUT0
J13
TIN1
K16
TIN3
E14
F16
D16
E15
D15
SDA
SPI_CS1
CANRX
SCL
IRQ1_LVS
IRQ1_FET
CANTX
IRQ3_LVS
IRQ3_FET
GND
IRQ5_LVS
IRQ5_FET
IRQ7_LVS
IRQ7_FET
GND
VCC3V
N6
T7
R1
R2
T2
R3
T3
T4
R4
P3
E13
C16
C14
B15
e t B u r n e r
J2 Connector
Note:
Description
1. Plus sign (+) denotes additional
Ground
alternate pin function
Input power 3.3V
UART 0 Receive4
2. If using I2C, the module must add
UART 0 Transmit4
pull-up resistors to SDA/SCL.
ADVCC
3. The third UART ( UART2) can be
Analog I/O CH3
routed to either of the two pin
Analog I/O CH1
configurations: replacing CAN RX
Analog I/O CH2
Analog I/O CH56
andTX, or I2C SDA and SDL.
Analog I/O CH0
4.TIN0, TIN1 and TIN2 can be used as
Analog I/O CH53
external baud rate clocks for UART0,
Analog I/O CH52
UART1 and UART2
Analog I/O CH55
Ground
General Purpose Timer A3
General Purpose Timer B3
General Purpose Timer A2
General Purpose Timer B2
General Purpose Timer A1
General Purpose Timer B1
UART 1 Receive4
UART 1 Transmit4
General Purpose Timer A0
General Purpose Timer B0
QSPI Clock
QSPI Chip Select 3
QSPI Input
QSPI Data Out
UCTS0
DMA Timer 24 In or UART 0 Clear to Send4 or
UCTS1
UART 1 Clear to Send4
QSPI Chip Select 0
UCTS0
DMA Timer 04 In or UART 0 Clear to Send4 or
UCTS1
UART 1 Clear to Send4
URTS0
DMA Timer 3 Out or UART 0 Request to Send4 or
URTS1
UART 1 Request to Send4
UCTS0
DMA Timer 2 Out or UART 0 Clear to Send4 or
UCTS1
UART 1 Clear to Send4
URTS0
DMA Timer 1 Out or or UART 0 Request to Send4 or
URTS1
UART 1 Request to Send4
QSPI Chip Select 2
UCTS0
DMA Timer 0 Out or UART 0 Clear to Send4 or
UCTS1
UART 1 Clear to Send4
URTS0
DMA Timer 14 In or UART 0 Request to Send4 or
URTS1
UART 1 Request to Send4
URTS0
DMA Timer 34 In or UART 0 Request to Send4 or
URTS1
UART 1 Request to Send4
URXD2
I2C Data Line2 or UART 2 Receive3,4
QSPI Chip Select 1
URXD2
CAN Receive or UART 2 Receive3,4
UTXD2
I2C Clock Line2 or UART 2 Transmit3,4
IRQ1_RET
IRQ1 Level-Sensitive, Rising Edge Triggered,
IRQ1_FRT
Falling Edge Triggered, Falling and Rising Edge Triggered
CAN Transmit
IRQ1_RET
IRQ3 Level-Sensitive, Rising Edge Triggered,
IRQ1_FRT
Falling Edge Triggered, Falling and Rising Edge Triggered
Ground
IRQ5_RET
IRQ5 Level-Sensitive, Rising Edge Triggered,
IRQ5_FRT
Falling Edge Triggered, Falling and Rising Edge Triggered
IRQ7_LVS
IRQ5 Level-Sensitive, Rising Edge Triggered,
IRQ7_FET
Falling Edge Triggered, Falling and Rising Edge Triggered
Ground
Revision 1.0, April
4, 2006.
2006 NetBurner, Inc. Specifications are subject to change without notice. Every effort
Input
power ©
3.3V
has been made to ensure all information is correct, but NetBurner, Inc. is not responsible for inadvertant errors.
Freescale(tm) and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service
names are the property of their respective owners. (c) Freescale Semiconductor, Inc. 2006
Alt. Func.
GPIO
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Networking in 1 Day!
www.NetBurner.com NetBurner Datasheet MOD5282-B
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
NetBurner:
NNDK-MOD5282-KIT MOD5282-100CR MOD5282-100IR NNDK-MOD5282LC-KIT MOD5282-200IR
Download PDF
Similar pages