BESP-T5811W
8-port 10/100TX PoE + 2-port Gigabit Uplink(1*TP, 1* SFP)
* 8-port 10/100M 802.3at PoE + 2-Port Gigabit
Uplink (1*TP,1*SFP)
* IEEE 802.3at PoE+, up to 30W per port
* Web-based Configuration and Management
* VLAN, QoS, RSTP, IGMP Snooping, LACP, Port
Security, Bandwidth Control, Broadcast Storm Control
* Max. 130W power consumption
* 11” Metal Case
Introduction
BESP-T5811W is 8-port 10M/100M + 2 port Giga uplink (1*TP+1*SFP) Desktop Web Smart PoE Switch, the switch
supports IEEE 802.3at Power over Ethernet standard, maximum 130W power consumption per system and no special
network cable required for your PD devices. The switch also provides exceptionally smart Web management features,
such as VLAN, QoS, RSTP, LACP, Port Security…etc. The switch is designed for small or medium network environment to
strengthen its network connection. This product is compact 11” size, making it ideal for Desktop users with limited space. It
also gives you the option of installing it in a 19” cabinet by rack-mount kits or underneath a desk.
IEEE 802.3at Power over Ethernet (PoE) ports
BESP-T5811W features 8 IEEE 802.3at Power over Ethernet (PoE) ports supplying up to 30 watts per port. This product
can convert standard 100~240V/AC power into low-voltage DC that runs over existing LAN cable to power up IEEE
802.3at compliant network accessories. It also features PoE awareness to verify whether the network device receive
power is IEEE 802.3at compliant, or only the data will be sent through LAN cable. By adding BESP-T5811W to existing
networking, installing networking products such as Access Points and IP cameras can be easily managed and set up.
Wireless device deployments are easily located with available power outlets and network administrators don’t need to use
heavy AC power adapters anymore.
No Special Networking Cable Required
By adding PoE devices, you can use an existing standard Cat-5 Ethernet cable without a new electrical outlet for both
power and data. It helps you reduce installation time and cost.
Exceptionally Smart
BESP-T5811W 8-port PoE + 2 port Giga uplink (1*TP+1*SFP) Desktop Web Smart PoE Switch features management
interface that can be managed through Web Browser and provides Smart features that are ideal for simple network
applications and basic monitoring tools to improve network efficiency. Through a Web-based interface, an administrator
can set up VLANs to segregate traffic, QoS to prioritize mission-critical data, RSTP/Loop Protection to avoid network loop,
link aggregation to create fat traffic pipelines, bandwidth control to limit traffic load and Port Security to secure your network.
All of these features offer extra protection on the network edge. Best of all, the password-protected configuration interface
can be accessed remotely.
Auto-MDI/MDI-X
Every port can automatically sense your type of cable, so there is no need for crossover cables whether you are
connecting this switch to another switch or to a computer.
Auto-Negotiation
Every port can automatically sense if the connected network devices are running at 10Mbps, 100Mbps or 1000Mbps and
Half/Full-Duplex mode, and adjust accordingly.
Non-Blocking
This switch receives and forwards traffic seamlessly with its non-blocking wire-speed. Every 100Mbps port simultaneously
supports up to 200Mbps of bandwidth in full-duplex mode, Gigabit port supports up to 2000Mbps of bandwidth in ull-duplex
mode. This feature provides full wire speed to the connected devices and allows you to run a smooth network.
Technical Specifications
Standards
Features
Smart Features
Filtering/Forwarding Rates
Transmission Media
Led Indicators
Power Input
Power Output
Power Consumption
Dimensions
Weight
Operating Temperature
Storage Temperature
Humidity
Certifications
IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX
IEEE 802.ab 1000BaseT
IEEE 802.3z 1000BaseSX/LX IEEE 802.3x Flow Control
IEEE 802.3ad Link Aggregation Control Protocol
IEEE 802.1Q VLAN
IEEE 802.1p Class of Service
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.3at Power Over Ethernet (PoE+)
Number of Ports: 10
Fast Ethernet: 8-port 10/100 Base-TX, IEEE 802.3at PSE
Gigabit Ethernet: 1-port 10/100/1000 Base-T, 1-port Gigabit SFP MAC
Address: 4K
Buffer Memory: 2.75M bits
Transmission Method: Store and Forward
Port Based VLAN: 10
Tagged Based VLAN: 32, VID = 1~4094
STP/RSTP
IGMP Snooping V1&V2
Link Aggregation: 1, Gigabit ports
Quality of Service(QoS): High & Low priority queues, 802.1p
Security: Port & MAC binding, 3 MAC per port
Port: Port State, Speed/Duplex, Flow Control Configuration
Port Mirroring Bandwidth Control Broadcast Storm Control
PoE Control: PoE Port Enable/Disable, PoE Status
Management: Web Management, password protection
Configuration backup/restore, Firmware upgrade
10Mbps port - 14,880pps
100Mbps port - 148,800pps
1000Mbps port - 1,488,000pps
10BaseT Cat. 3, 4, 5 UTP/STP
100BaseTX Cat. 5 UTP/STP
1000BaseT Cat. 5/5E,6 UTP/STP
Per Port: Link/Act, PoE Act/Status
Per Unit: Power
100~240V/AC, 50~60Hz
802.3at compliant, 30W Max. per Port
130, 180 Watts models
44 × 266 × 160 mm (Hx W x D)
1.8 kg
0 to 45℃
-20 to 90℃
10 to 90% RH (non-condensing)
FCC Class B, CE
Order Information
Model Name
BESP-T588W(130)
BESP-T588W(180)
11inchear
Description
10-port: 8-Port 10M/100M 802.3at PoE + 2-Port Giga uplink (1*TP+1*SFP)
Desktop Web Smart PoE Switch (Power Supply: 130 Watts)
10-port: 8-Port 10M/100M 802.3at PoE + 2-Port Giga uplink (1*TP+1*SFP)
Desktop Web Smart PoE Switch (Power Supply: 180 Watts)
Additional Optional Ear for 19 inch Rack-mount
Download PDF
Similar pages