Alcatel OmniPCX Enterprise

Alcatel OmniPCX Enterprise
IP Touch
System with Spatial redundancy (local equipment)
Configuration
© Copyright Alcatel Business Systems 2005
Transmission or copying of this document is not permitted without prior written authorization.
The wording "Document Alcatel Business Systems" must appear on all authorized reproduction.
OBJECTIVE:
◆ Describe the configuration of a local IP Touch in case of a duplicated configuration with spatial redundancy
OmniPCX Enterprise – IP Touch
Ref. ENTP0486C01TEUS
Issue 01
1
Configuration of IP Touch
Local equipment
Press the keys "i" + "#“ for a static IP configuration
➨ ip parameters
ip mode
ip address
Subnet
Router
Tftp1
Tftp2
: static
: 10.1.1.51
: 255.255.0.0
: 10.1.1.100
: 10.1.1.3
: 155.132.1.3
Press the keys "i" + "#“ for a dynamic IP configuration
➨ ip parameters
ip mode
: dynamic
© Copyright Alcatel Business Systems 2005
Transmission or copying of this document is not permitted without prior written authorization.
The wording "Document Alcatel Business Systems" must appear on all authorized reproduction.
You have to specify the TFTP IP address of both CS in Tftp1 and Tftp2 parameters.
Enter their main role address
In case of dynamic configuration, only the CS in main status will answer to the DHCP request from the IP Touch set.
The CS are able to determine local and remote LAN according to a common management in the database because they
have a different dhcpd.conf linked to their IP configuration.
OmniPCX Enterprise – IP Touch
Ref. ENTP0486C01TEUS
Issue 01
2
Download PDF
Similar pages