8-Port 10/100Mbps Ethernet Switch with 8 PoE Ports

8-Port 10/100Mbps Ethernet Switch with 8 PoE Ports
Brief Introduction:
The CH-S7009-P combine a 8-port 10/100Mbps Ethernet switch with a IEEE802.3af standard 8-port PoE. All 8 PoE ports
can provide 15.4W power as well as 10/100M data transmission through the Cat5/5e/6 cables.
CH-S7009-P is a Power Source Equipment (PSE) and fully compatible with Powered Devices (PD) that comply with the
IEEE 802.3af PoE standard, allowing users to connect PD devices such as wireless Access Points (APS), VOIP phone,
IP camera, printer and Network Attached Storage (NAS) without additional power. It’s convenient and cost-effective
especially when the devices located in unavailable AC power.
The Plug-and-Play design make easy installation and operation, and all ports support Auto-MDI/MDIX, you don’t have to
worry about the cable type any more.
Features:
● 8 PoE ports in a small-size 8-port Ethernet Switch
● Compact design for home and SOHO use
● Supports standard Cat5, 5E, 6 cables
● Plug-and-play convenient operation
● Each PoE port provides 15.4W max power to connected PD devices
Specifications:
Specification
Standards
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-T Fast Ethernet
IEEE 802.3x Flow Control for Full-Duplex
IEEE 802.3af Power over Ethernet
Protocol
Data Transfer Rate
CSMA/CD
Ethernet: 10Mbps (half-duplex), 20Mbps (full-duplex)
Fast Ethernet: 100Mbps (half-duplex), 200Mbps (full-duplex)
Network Cables
10Base-T: 2-pair UTP Cat 3, 4, 5 up to 100 meters.
100Base-T : 2-pair UTP Cat 5, 5e up to 100 meters.
Fixed Port
10/100BASE-T ports x 8
Power Over Ethernet ports x 8
Power x 1.
LED Indicators
Link/Active x 8
PoE Power X 8
MAC Address
1K
MAC Address Learning
Automatic update
Buffer Memory
64K
PoE power on RJ-45
PoE Power "+": pin 3 & pin 6;
Power Supply
Input: 110V ~ 240VAC, 50Hz ~ 60Hz. Output: 48VDC / 2.5A
Power Consumption
Power "-" pin 1 & pin 2
8.0 watts ( no PD connected)
96 watts ( 8 PoE ports 15.4W/port)
Working Temperature
0ºC~40ºC
Store Temperature
-40ºC~70ºC
Operating Humidity
10%~90% RH Non-Condensing
Storage Humidity
5%~90% RH Non-Condensing
PoE VoIP Phone
PoE Wireless Access Points.
Applications
PoE IP Camera
POE IP Phone
Other PD more in further
Download PDF
Similar pages