C at e g o r y 6 S y s t e m s
BRAND-REX CAT6PLUS SYSTEM
(CATEGORY 6 - CLASS E):
Key Features
• Cat6Plus is standards compliant
• Cat6Plus is third party independently
verified by 3P and GHMT
•Third party independent certificates of
compliance are available for component
and channel performance from 3P Inc.
and GHMT Laboratories GmbH
• 1000BASE-T will operate with a lower
bit error rate given the extra margin
afforded by Cat6Plus
• Cat6Plus shielded systems will support
10GBASE-T in any channel configuration
up to 100 metres*. Cat6Plus unscreened
systems can support 10GBASE-T in any
channel configuration up to 37 metres*
and up to 55 metres* subject to Alien
Cross Talk verification
* Subject to testing to the latest versions
of TSB 155 or TR 24750
• Cat6Plus supports broadband video
applications up to 550MHz
• Cat6Plus supports Power over Ethernet
applications including:
-VoIP
-WLAN access points
-Security cameras etc
• Reduced bit error rate as a consequence
of higher system margin above standard
• System available in both shielded
and unshielded options
• Cat6Plus is interoperable and
backwards compatible
• For EMC add the same statement
as outlined for Cat 5e
21
c at e g o r y 6 S y S t e m S
The Cat6Plus System
the systems support all protocols defined
in current editions, and amendments,
of ISO 11801:2002, ANSI/TIA/EIA
568b.2.1 : 2002 and en50173-1:2002
(including ieee802.3ab gigabit ethernet)
and are fully backward compatible.
Structured wiring systems comprising
of cat6plus cables, patch leads and
connectivity are designed to be
compliant with the current sets of
Class E / Category 6 published and
draft standards requirements as an
absolute minimum.
cat6plus is a premium grade cabling
system that is characterised to 550mHz
and its performance significantly exceeds
the requirements specified in the current
versions of the published and draft
standards for Class E / Category 6.
Brand-Rex Copper Cables - Cat6Plus Channel Performance
unshielded and Shielded systems
building
riser
terminal
patch panel
Wall/Floor
outlet
central computer room
Channel
4 Connector Channel Performance
Frequency (MHz)
Attenuation (dB)
Typical
Spec
NEXT (dB)
Typical
Spec
PSNEXT (dB)
Typical
Spec
Return Loss (dB)
Typical
Spec
ELFEXT (dB)
Typical
Spec
PSELFEXT (dB)
Typical
Spec
Propagation Delay (ns)
Typical
Spec
Delay Skew (ns)
Typical
Spec
ACR (dB)
Typical
Spec
PSACR (dB)
Typical
Spec
22
1
4
10
16
20 31.25 62.5 100 125 155 175 200 250 350 500
1.9
2.1
80.7
65.0
78.6
62.0
28.0
19.0
78.3
63.3
75.3
60.3
520
580
<30
<50
78.8
62.9
76.7
59.9
3.5
4.0
71.0
63.0
68.8
60.5
25.0
19.0
66.2
51.2
63.2
48.2
505
562
<30
<50
67.6
59.0
65.3
56.5
5.5
6.3
64.6
56.6
62.3
54.0
23.0
19.0
58.3
43.3
55.3
40.3
500
555
<30
<50
59.1
50.2
56.8
47.7
7.0
8.0
61.2
53.2
58.9
50.6
22.0
18.0
54.2
39.2
51.2
36.2
500
553
<30
<50
54.3
45.2
51.9
42.6
7.8
9.0
59.6
51.6
57.2
49.0
21.5
17.5
52.2
37.2
49.2
34.2
500
552
<30
<50
51.8
42.6
49.4
39.9
9.8
11.4
56.4
48.4
54.0
45.7
20.5
16.5
48.4
33.4
45.4
30.4
500
550
<30
<50
46.6
37.0
44.1
34.3
14.2
16.5
51.4
43.4
48.8
40.6
19.0
14.0
42.3
27.3
39.3
24.3
500
549
<30
<50
37.2
26.9
34.6
24.1
18.4
21.3
47.9
39.9
45.3
37.1
18.0
12.0
38.3
23.3
35.3
20.3
500
548
<30
<50
29.6
18.6
26.9
15.8
20.8
24.1
46.3
38.3
43.6
35.4
17.5
11.0
36.3
21.3
33.3
18.3
500
547
<30
<50
25.5
14.2
22.9
11.3
23.4
27.2
44.7
36.7
42.0
33.8
17.0
10.1
34.5
19.5
31.5
16.5
500
547
<30
<50
21.3
9.51
8.6
6.6
25.0
29.2
43.8
35.8
41.1
32.9
16.8
9.6
33.4
18.4
30.4
15.4
500
547
<30
<50
18.7
6.6
16.0
3.7
27.0
31.5
42.8
34.8
40.1
31.9
16.5
9.0
32.2
17.2
29.2
14.2
500
547
<30
<50
15.8
3.3
13.1
0.3
30.6
35.9
41.1
33.1
38.3
30.2
16.0
8.0
30.3
15.3
27.3
12.3
500
546
<30
<50
10.5
-2.8
7.7
-5.8
550
37.2
45.9
48.6
35.6
32.9
32.2
32.8
30.0
29.3
15.3
14.5
14.3
22.4
19.3
18.4
19.4
16.3
15.4
500
500
500
<30
<30
<30
-1.6
-13.1
-16.5
-4.5
-15.9
-19.4
C at e g o r y 6 S y s t e m s
6
250MHz
Sheath
Cross Filler
Solid PE Insulation
ISO/IEC 11801 : 2002
ISO/IEC 61156-5
EN 50173-1 : 2002
EN 50288-6-1
ANSI/TIA/EIA 568B.2.1 : 2002
23 AWG PACW
Independent 3rd Party Certification (3P)
PRODUCT DESCRIPTION:
Cat6Plus U/UTP, 100 Ω, 4x2xAWG 23/1 premium
grade Class E/Cat 6 cable to support Gigabit
Ethernet protocol for installation in horizontal
and backbone areas.
Brand-Rex Copper Cables - Cat6Plus
Communication Cable, U/UTP, 100 Ω, 4x2xAWG 23/1
Electrical Characteristics @ 20°c
Specification
Typical Performance
Conductor Loop Resistance
Conductor Resistance Unbalance
Dielectric Strength
Insulation Resistance
Capacitance Unbalance to Earth
Velocity of Propagation
Skew
Mean Characteristic Impendance
Coupling Attenuation up to 1Ghz
Max 19 Ω / 100m
Max 2%
1.0kV dc or 0.7kV ac for 1 min
>500MΩ.km @ 100-500 V test voltage
Max 160 pF/100m
<534 nsec/100m @ 100MHz
Max 40 nsec/100m @ 100MHz
100 Ω +/- 5 Ω @ 100MHz
Min 40 dB
14 Ω / 100m
0.5%
100% in process test
>5 GΩ.km
40 pF/100m
490 nsec/100m @ 100MHz (NVP for hand held testers = 0.69)
30 nsec/100m @ 100MHz
100 Ω +/- 3Ω @ 100MHz
56 dB
Frequency (MHz)
Insertion Loss (dB / 100m)
Spec
Typical
NEXT (dB)
Spec
Typical
PSNEXT (dB)
Spec
Typical
ELFEXT (dB / 100m)
Spec
Typical
PSELFEXT (dB / 100m)
Spec
Typical
Return Loss (dB / 100m)
Spec
Typical
ACR (dB / 100m)
PSACR (dB / 100m)
Typical
Typical
1
4
10
16
20
31.25
62.5
100
155
200
250
300
550
2.1
1.9
66.0
86.5
64.0
84.5
66.0
85.0
64.0
82.0
na
27.0
84.6
82.6
3.8
3.5
65.3
77.5
63.3
75.5
58.0
73.0
55.0
70.0
23.0
30.0
73.9
71.9
6.0
5.5
59.3
71.5
57.3
69.5
50.0
65.0
47.0
62.0
25.0
30.0
66.0
64.0
7.6
7.0
56.2
68.4
54.2
66.4
45.9
60.9
42.9
57.9
25.0
30.0
61.4
59.4
8.5
7.8
54.8
67.0
52.8
65.0
44.0
59.0
41.0
56.0
25.0
30.0
59.1
57.1
10.7
9.9
51.9
64.1
49.9
62.1
40.1
55.1
37.1
52.1
23.6
28.6
54.2
52.2
15.5
14.1
47.4
59.6
45.4
57.6
34.1
49.1
31.1
46.4
21.5
26.5
45.5
43.5
19.9
18.0
44.3
56.5
42.3
54.5
30.0
45.0
27.0
42.0
20.1
25.1
38.5
36.5
25.3
22.7
41.4
53.6
39.4
51.6
26.2
41.2
23.2
38.2
18.8
23.8
30.9
28.9
29.1
26.1
39.8
52.0
37.8
50.0
24.0
39.0
21.0
36.0
18.0
23.0
25.9
23.9
33.0
29.4
38.3
50.5
36.3
48.5
22.0
37.0
19.0
34.0
17.3
22.3
21.1
19.1
na
32.5
na
49.3
na
47.3
na
35.5
na
32.5
na
21.8
16.9
14.9
na
45.4
na
45.4
na
43.4
na
30.2
na
27.2
na
19.9
0.0
-2.0
Product Part Numbering
Part Number
C6U
C6U-D
C6U-HF1
C6U-HF1-D
C6U-HF3
C6U-HF3-D
Outer Sheath
PVC
PVC
LSZH
LSZH
LSZH
LSZH
Construction
Simplex
Duplex
Simplex
Duplex
Simplex
Duplex
Cable Weight
43.5 kg/km
87.0 kg/km
43.0kg/km
86.0 kg/km
56.5 kg/km
113 kg/km
Calorific Value
0.19 k Wh/m
0.38 k Wh/m
0.18 k Wh/m
0.36 k Wh/m
0.26 k Wh/m
0.52 k Wh/m
6.2mm
12.5 x 6.2mm
Outer Diameter (nom)
6.2mm
12.5 x 6.2mm
Sheath Colour
Grey RAL 7037
Grey RAL 7037
Fire Safety Rating
Violet RAL 4005 Violet RAL 4005
7.0mm
14.1 x 7.0mm
Blue RAL 5015
Blue RAL 5015
IEC 60332-1-2
IEC 60332-1-2
IEC 60332-1-2
IEC 60332-1-2
IEC 60332-3-24
IEC 60332-3-24
Acid Gas Emissions
na
na
IEC 60754-1
IEC 60754-1
IEC 60754-1
IEC 60754-1
Smoke Index
na
na
IEC 61034
IEC 61034
IEC 61034
IEC 61034
RLX / WRL
WRL
RLX / WRL
WRL
WRL
WRL
Packaging
PRODUCT PERFORMANCE:
Core
Conductor:23 AWG Plain Annealed
Copper Wire
Insulation:Polyolefin
Diameter:
1.00mm Nominal
Pair:
2 of the above cores
Pair Colour:Blue-White, Orange-White,
Green-White, Brown-White
Final Assembly
Cable:4 of the above pairs cabled
together around a cross filler
Sheath:PVC or LSZH compound
Mechanical and Environmental
Temp - Installation: 0°c to +50°c
Temp - Operation: -20°c to +75°c
Max Tensile Load:10kg per simplex cable
(installation)
Min Bend Radius:8 x Outer Diameter
(installation)
4 x Outer Diameter
(operation)
Packaging
RLX
WRL
305m Reelex Box
500m Wooden Reel
1000m Wooden Reel
23
c at e g o r y 6 S y S t e m S
6
250MHz
Sheath
polyester tape
AI/PET Tape
polyolefin insulation
23 aWg pacW
ISO/IEC 11801 : 2002
ISO/IEC 61156-5
EN 50173-1 : 2002
EN 50288-5-1
ANSI/TIA/EIA 568B.2.1 : 2002
tacW drainwire
PRODUCT DESCRIPTION:
Cat6Plus U/FTP, 100 Ω, 4x2xAWG 23/1 premium
grade Class E/Cat 6 cable to support Gigabit
ethernet protocol for installation in horizontal
and backbone areas.
Brand-Rex Copper Cables - Cat6Plus
Communication Cable, U/FTP, 100 Ω, 4x2xAWG 23/1
Electrical Characteristics @ 20°c
conductor loop resistance
conductor resistance unbalance
dielectric Strength
insulation resistance
capacitance unbalance to earth
Velocity of propagation
Skew
mean characteristic impendance
transfer impendance
Frequency (MHz)
Insertion Loss (dB / 100m)
Spec
Typical
NEXT (dB)
Spec
Typical
PSNEXT (dB)
Spec
Typical
ELFEXT (dB / 100m)
Spec
Typical
PSELFEXT (dB / 100m)
Spec
Typical
Return Loss (dB / 100m)
Spec
Typical
ACR (dB / 100m)
PSACR (dB / 100m)
Typical
Typical
Specification
Typical Performance
Max 19 Ohm / 100m
max 2%
1.0kV dc or 0.7kV ac for 1 min
>500mohm @ 100-500 V test voltage
Max 160 pF/100m
<537.6 nsec/100m @ 100MHz
Max 40 nsec/100m @ 100MHz
100 Ohm +/- 5 Ohm @ 100MHz
Max 100 mΩ/m @ 10 MHz
14 Ohm / 100m
0.5%
100% in process test
>5 gohm.km
40 pF/100m
440 nsec/100m @ 100MHz (NVP for hand held testers = 0.74)
20 nsec/100m @ 100MHz
100 Ω +/- 3 Ohm @ 100MHz
30 mΩ/m @ 10MHz (ISO 61156 grade 2)
1
4
10
16
20
2.1
1.9
66.0
100.0
64.0
97.0
66.0
90.0
64.0
87.0
20.0
30.0
98.1
95.1
3.8
3.5
65.3
100.0
63.3
97.0
58.0
89.0
55.0
86.0
23.0
30.0
96.5
93.5
6.0
5.5
59.3
100.0
57.3
97.0
50.0
85.0
47.0
82.0
25.0
30.0
94.5
91.5
7.6
7.0
56.2
100.0
54.2
97.0
45.9
81.0
42.9
78.0
25.0
30.0
93.0
90.0
8.5
7.8
54.8
100.0
52.8
97.0
44.0
76.0
41.0
73.0
25.0
30.0
92.2
89.2
31.25 62.5
10.7
9.9
51.9
100.0
49.9
97.0
40.1
72.0
37.1
69.0
23.6
27.0
90.1
87.1
15.5
14.1
47.4
100.0
45.4
97.0
34.1
67.0
31.1
64.0
21.5
25.0
85.9
82.9
100
155
200
250
300
600
19.9
18.0
44.3
100.0
42.3
97.0
30.0
60.0
27.0
57.0
20.1
24.0
82.0
79.0
25.3
22.7
41.4
100.0
39.4
97.0
26.2
52.0
23.2
49.0
18.8
22.0
77.3
74.3
29.1
26.1
39.8
100.0
37.8
97.0
24.0
50.0
21.0
47.0
18.0
21.0
73.9
70.9
33.0
29.4
38.3
95.0
36.3
92.0
22.0
49.0
19.0
46.0
17.3
20.0
65.9
62.6
na
32.5
na
90.0
na
87.0
na
40.0
na
37.0
na
19.0
57.5
54.5
na
47.6
na
90.0
na
87.0
na
35.0
na
32.0
na
17.0
42.4
39.4
Product Part Numbering
Part Number
C6U/FTP
C6U/FTP-D
outer Sheath
pVc
pVc
lSZH
lSZH
construction
Simplex
duplex
Simplex
duplex
C6U/FTP-HF1 C6U/FTP-HF1-D
cable Weight (nom)
51.1 kg/km
102.5 kg/km
53.8 kg/km
108.0 kg/km
calorific Value
0.22 k Wh/m
0.22 k Wh/m
0.20 k Wh/m
0.20 k Wh/m
outer diameter (nom)
7.15mm
7.15mm
7.15mm
7.15mm
Sheath colour
grey ral 7037
grey ral 7037
Violet ral 4005
Violet ral 4005
Fire Safety rating
iec 60332-1-2
iec 60332-1-2
iec 60332-1-2
iec 60332-1-2
acid gas emissions
na
na
iec 60754-1
iec 60754-1
Smoke index
na
na
iec 61034
iec 61034
Wrl
Wrl
Wrl
Wrl
packaging
24
PRODUCT PERFORMANCE:
Core
conductor:
23 aWg plain
annealed copper Wire
insulation:
polyolefin
diameter:
1.4mm nominal
pair:
2 of the above cores
tape Screen:
individual pair wrapped with
aluminium polyester tape
applied metal side out
pair colour:
blue-White, orange-White
green-White, brown-White
Final Assembly
cable:
drainwire:
tape Screen:
Sheath:
4 of the above pairs cabled
together around a cross filler
0.5mm tinned annealed
copper Wire
Wrapped with
polyester tape
pVc or lSZH compound
Mechanical and Environmental
temp - installation: 0°c to +50°c
temp - operation: -20°c to +75°c
max tensile load:
10kg per simplex cable
(installation)
min bend radius:
8 x outer diameter
(installation)
4 x outer diameter
(operation)
Packaging
Wrl
500m Wooden reel
1000m Wooden reel
C at e g o r y 6 S y s t e m s
6
250MHz
Sheath
AI/PET Tape
AI/PET Tape
Cellular Polyolefin Insulation
23 AWG PACW
ISO/IEC 11801 : 2002
ISO/IEC 61156-5
EN 50173-1 : 2002
EN 50288-5-1
ANSI/TIA/EIA 568B.2.1 : 2002
TACW Drainwire
Independent 3rd Party Certification (3P)
PRODUCT DESCRIPTION:
Cat6Plus F/FTP, 100 Ω, 4x2xAWG 23/1 premium
grade Class E/Cat 6 cable to support Gigabit
Ethernet protocol for installation in horizontal
and backbone areas.
Brand-Rex Copper Cables - Cat6Plus
Communication Cable, F/FTP, 100 Ω, 4x2xAWG 23/1
Electrical Characteristics @ 20°c
Specification
Typical Performance
Conductor Loop Resistance
Conductor Resistance Unbalance
Dielectric Strength
Insulation Resistance
Capacitance Unbalance to Earth
Velocity of Propagation
Skew
Mean Characteristic Impendance
Transfer Impendance
Coupling Attenuation up to 1Ghz
Max 19 Ω / 100m
Max 2%
1.0kV dc or 0.7kV ac for 1 min
>500MΩ @ 100-500 V test voltage
Max 160 pF/100m
<537.6 nsec/100m @ 100MHz
Max 40 nsec/100m @ 100MHz
100 Ω +/- 5 Ω @ 100MHz
Max 100 mΩ/m @ 10MHz
Min 55 dB
14 Ω / 100m
0.5%
100% in process test
>500 MΩ.km
80 pF/100m
537.6 nsec/100m @ 100MHz (NVP for hand held testers = 0.74)
25 nsec/100m @ 100MHz
100 Ω +/- 3 Ω @ 100MHz
30 mΩ/m @ 10MHz (ISO 61156 grade 1 cable)
75 dB
Frequency (MHz)
Insertion Loss (dB / 100m)
Spec
Typical
NEXT (dB)
Spec
Typical
PSNEXT (dB)
Spec
Typical
ELFEXT (dB / 100m)
Spec
Typical
PSELFEXT (dB / 100m)
Spec
Typical
Return Loss (dB / 100m)
Spec
Typical
ACR (dB / 100m)
PSACR (dB / 100m)
Typical
Typical
1
4
10
16
20
31.25
62.5
100
155
200
250
300
600
2.1
1.9
66.0
100.0
64.0
97.0
66.0
90.0
64.0
88.0
23.0
30.0
96.5
93.5
3.8
3.5
65.3
100.0
63.3
97.0
58.0
89.0
55.0
86.0
23.0
30.0
96.5
93.5
6.0
5.5
59.3
100.0
57.3
97.0
50.0
85.0
47.0
82.0
25.0
30.0
94.5
91.5
7.6
7.0
56.2
100.0
54.2
97.0
45.9
81.0
42.9
78.0
25.0
30.0
93.0
90.0
8.5
7.8
54.8
100.0
52.8
97.0
44.0
76.0
41.0
73.0
25.0
30.0
92.2
89.2
10.7
9.9
51.9
100.0
49.9
97.0
40.1
72.0
37.1
69.0
23.6
27.0
90.1
87.1
15.5
14.1
47.4
100.0
45.4
97.0
34.1
67.0
31.1
64.0
21.5
25.0
85.5
82.9
19.9
18.0
44.3
100.0
42.3
97.0
30.0
60.0
27.0
57.0
20.1
24.0
82.0
79.0
25.3
22.7
41.4
100.0
39.4
97.0
26.2
52.0
23.2
49.0
18.8
22.0
77.3
74.3
29.1
26.1
39.8
100.0
37.8
97.0
24.0
50.0
21.0
47.0
18.0
21.0
74.0
71.0
33.0
29.4
38.3
95.0
36.3
92.0
22.0
49.0
19.0
46.0
17.3
20.0
65.6
62.6
na
32.5
na
90.0
na
87.0
na
40.0
na
37.0
na
19.0
57.5
54.5
na
47.6
na
90.0
na
87.0
na
35.0
na
32.0
na
17.0
42.4
39.4
Product Part Numbering
Part Number
C6F/FTP
C6F/FTP-HF1
C6F/FTP-HF3
Outer Sheath
PVC
LSZH
LSZH
Construction
Simplex
Simplex
Simplex
Cable Weight
51.4 kg/km
54.3 kg/km
55.3 kg/km
Calorific Value
0.23 k Wh/m
0.20 k Wh/m
0.21 k Wh/m
Outer Diameter (nom)
7.3mm
7.3mm
7.4mm
Sheath Colour
Grey RAL 7037
Violet RAL 4005
Blue RAL 5015
Fire Safety Rating
IEC 60332-1-2
IEC 60332-1-2
IEC 60332-3-24
Acid Gas Emissions
na
IEC 60754-1
IEC 60754-1
Smoke Index
na
IEC 61034
IEC 61034
WRL
WRL
WRL
Packaging
PRODUCT PERFORMANCE:
Core
Conductor:23 AWG Plain
Annealed Copper Wire
Insulation:Cellular Polyolefin
Diameter:
1.45mm Nominal
Pair:
2 of the above cores
Tape Screen:Individual pair wrapped with
aluminium polyester tape
applied metal side out
Pair Colour:Blue-White, Orange-White
Green-White, Brown-White
Final Assembly
Cable:4 of the above shielded pairs
Drainwire:0.5mm Tinned
Annealed Copper Wire
Tape Screen:Wrapped with aluminium
polyester tape, applied metal
side in
Sheath:PVC or LSZH compound
Mechanical and Environmental
Temp - Installation: 0°c to +50°c
Temp - Operation: -20°c to +75°c
Max Tensile Load:10kg per simplex cable
(installation)
Min Bend Radius:8 x Outer Diameter
(installation)
4 x Outer Diameter
(operation)
Packaging
WRL
500m Wooden Reel
1000m Wooden Reel
25
c at e g o r y 6 S y S t e m S
6
250MHz
Sheath
tacW braid
AI/PET Tape
cellular polyolefin insulation
23 aWg pacW
ISO/IEC 11801 : 2002
ISO/IEC 61156-5
EN 50173-1 : 2002
EN 50288-5-1
ANSI/TIA/EIA 568B.2.1 : 2002
Independent 3rd Party Certification (3P)
PRODUCT DESCRIPTION:
Cat6Plus S/FTP, 100 Ω, 4x2xAWG 23/1 premium
grade Class E/Cat 6 cable to support Gigabit
ethernet protocol for installation in horizontal
and backbone areas.
Brand-Rex Copper Cables - Cat6Plus
Communication Cable, S/FTP, 100 Ω, 4x2xAWG 23/1
Electrical Characteristics @ 20°c
Specification
Typical Performance
conductor loop resistance
conductor resistance unbalance
dielectric Strength
insulation resistance
capacitance unbalance to earth
Velocity of propagation
Skew
mean characteristic impendance
transfer impendance
coupling attenuation up to 1ghz
Max 19 Ω / 100m
max 2%
1.0kV dc or 0.7kV ac for 1 min
>500mΩ.km @ 100-500 V test voltage
Max 160 pF/100m
<537.6 nsec/100m @ 100MHz
Max 40 nsec/100m @ 100MHz
100 Ω +/- 5 Ω @ 100MHz
Max 100 mΩ/m @ 10 MHz
min 55 db
14 Ω / 100m
0.5%
100% in process test
>5 gΩ.km
80 pF/100m
445 nsec/100m @ 100MHz (NVP for hand held testers = 0.74)
5 nsec/100m @ 100MHz
100 Ω +/- 3 0hm @ 100MHz
5 mΩ/m @ 10MHz (ISO 61156 grade 1 cable)
90 db
Frequency (MHz)
Insertion Loss (dB / 100m)
Spec
Typical
NEXT (dB)
Spec
Typical
PSNEXT (dB)
Spec
Typical
ELFEXT (dB / 100m)
Spec
Typical
PSELFEXT (dB / 100m)
Spec
Typical
Return Loss (dB / 100m)
Spec
Typical
ACR (dB / 100m)
PSACR (dB / 100m)
Typical
Typical
1
4
10
16
20
31.25
62.5
100
155
200
250
300
600
2.1
1.9
66.0
100.0
64.0
97.0
66.0
90.0
64.0
87.0
23.0
30.0
96.5
93.5
3.8
3.5
65.3
100.0
63.3
97.0
58.0
90.0
55.0
87.0
23.0
30.0
96.5
93.5
6.0
5.5
59.3
100.0
57.3
97.0
50.0
90.0
47.0
87.0
25.0
30.0
94.5
91.5
7.6
7.0
56.2
100.0
54.2
97.0
45.9
86.7
42.9
83.7
25.0
30.0
93.0
90.0
8.5
7.8
54.8
100.0
52.8
97.0
44.0
84.8
41.0
81.8
25.0
30.0
92.2
89.2
10.7
9.9
51.9
100.0
49.9
97.0
40.1
80.9
37.1
77.9
23.6
28.6
90.1
87.1
15.5
14.1
47.4
98.0
45.4
95.0
34.1
74.9
31.1
71.9
21.5
26.5
83.9
80.9
19.9
18.0
44.3
94.3
42.3
91.3
30.0
70.8
27.0
67.8
20.1
25.1
76.3
73.3
25.3
22.7
41.4
90.9
39.4
87.9
26.2
67.0
23.2
64.0
18.8
23.8
68.1
65.1
29.1
26.1
39.8
88.9
37.8
85.9
24.0
64.8
21.0
61.8
18.0
23.0
62.8
59.8
33.0
29.4
38.3
87.1
36.3
84.1
22.0
62.8
19.0
59.8
17.3
22.3
57.7
54.7
na
32.5
na
85.7
na
82.7
na6
1.3
na
58.3
na
21.8
53.3
50.3
na
47.6
na
80.3
na
77.3
na
55.2
na
52.2
na
19.7
32.6
29.6
Product Part Numbering
Part Number
C6STP
C6STP-D
C6STP-HF1
C6STP-HF1-D
C6STP-HF3
outer Sheath
pVc
pVc
lSZH
lSZH
lSZH
C6STP-HF3-D
lSZH
construction
Simplex
duplex
Simplex
duplex
Simplex
duplex
cable Weight
62.6 kg/km
122.0 kg/km
64.1kg/km
127.1 kg/km
65.1 kg/km
129.0 kg/km
calorific Value
0.22 k Wh/m
0.42 k Wh/m
0.19 k Wh/m
0.39 k Wh/m
0.20 k Wh/m
0.43 k Wh/m
7.5mm
15 x 7.5mm
outer diameter (nom)
7.5mm
15 x 7.5mm
Sheath colour
grey ral 7037
grey ral 7037
Fire Safety rating
iec 60332-1-2
iec 60332-1-2
iec 60332-1-2
acid gas emissions
na
na
Smoke index
na
na
Wrl
Wrl
packaging
26
7.8mm
15.6 x 7.8mm
blue ral 5015
blue ral 5015
iec 60332-1-2
iec 60332-3-24
iec 60332-3-24
iec 60754-1
iec 60754-1
iec 60754-1
iec 60754-1
iec 61034
iec 61034
iec 61034
iec 61034
Wrl
Wrl
Wrl
Wrl
Violet ral 4005 Violet ral 4005
PRODUCT PERFORMANCE:
Core
conductor:
23 aWg plain
annealed copper Wire
insulation:
cellular polyolefin
diameter:
1.45mm nominal
pair:
2 of the above cores
tape Screen:
individual pair wrapped with
aluminium polyester tape
applied metal side out
pair colour:
blue-White, orange-White
green-White, brown-White
Final Assembly
cable:
braid Screen:
Sheath:
4 of the above pairs
0.127mm tinned
annealed copper Wire
pVc or lSZH compound
Mechanical and Environmental
Temp - Installation: 0°c to +50°c
Temp - Operation: -20°c to +75°c
Max Tensile Load: 10kg per simplex cable
(installation)
Mini Bend Radius: 8 x outer diameter
(installation)
4 x outer diameter
(operation)
Packaging
Wrl
500m Wooden reel
1000m Wooden reel
c at e g o r y 6 S y S t e m S
6
250MHz
THE BRAND-REX 8 POINT PATCH CORD PROMISE
1. cat6plus patch cords employ independently
verified Category 6 cable
2. cat6plus patch cords are manufactured
using leading brand Category 6 conformant
RJ-45 modular plugs
3. cat6plus patch cords are manufactured with
a flexible strain relief boot as standard
4. cat6plus patch cords are manufactured
using only quality approved assembly houses
to the exacting requirements of Brand-Rex
purchase specification
5. cat6plus patch cords are tested in accordance
with our AQL plan for Category 6
standards conformance
6. cat6plus patch cords are available in screened
and unscreened constructions
Compliant with ISO/IEC 61935-2
7. cat6plus patch cords carry a no quibble
replacement guarantee*
Brand-Rex Copper Patch Cords - Cat6Plus
8. cat6plus patch cords are incorporated within
the Brand-Rex warranty programme
category 6 blade patch cords
* Any Brand-Rex patch cord that fails to meet the specified
requirements of Category 6 will be replaced free of charge
PRODUCT DESCRIPTION:
brand-rex cat6plus patch cords enable you to
get the optimum performance from your cabling
system. our factory made and tested patch cords
offer you guaranteed quality, and ensure that
your system avoids the performance degradation
which inferior alternatives will give you at high
data rates. all patch cords are supplied with
boots and id tag.
Part Number Format
C6C-PC-A-bbb-cde-F
A - Cord Type
bbb - Cord Length
cde - Colour Scheme
U
24AWG UTP
010
1 metre
(c) Cable
(d) Boot 1
(e) Boot 2
S
Solid
S
27AWG STP
020
2 metre
1
Red
1
Red
1
Red
X
Crossover
030
3 metre
4
Blue
4
Blue
4
Blue
HB
Halogen Free
050
5 metre
5
Green
5
Green
5
Green
-
Standard
6
Yellow
6
Yellow
6
Yellow
8
Grey
8
Grey
8
Grey
Additional lengths on request
F - Speciality Tag
Additional colours on request
Product Part Numbering
Red
Blue
Green
Yellow
Grey
24 aWg utp - 1.0m
c6cpcu010-111Hb
c6cpcu010-444Hb
c6cpcu010-555Hb
c6cpcu010-666Hb
c6cpcu010-888Hb
24 aWg utp - 2.0m
c6cpcu020-111Hb
c6cpcu020-444Hb
c6cpcu020-555Hb
c6cpcu020-666Hb
c6cpcu020-888Hb
24 aWg utp - 3.0m
c6cpcu030-111Hb
c6cpcu030-444Hb
c6cpcu030-555Hb
c6cpcu030-666Hb
c6cpcu030-888Hb
24 aWg utp - 5.0m
c6cpcu050-111Hb
c6cpcu050-444Hb
c6cpcu050-555Hb
c6cpcu050-666Hb
c6cpcu050-888Hb
27 aWg SFtp - 1.0m
c6cpcS010-188Hb
c6cpcS010-488Hb
c6cpcS010-588Hb
c6cpcS010-688Hb
c6cpcS010-888Hb
27 aWg SFtp - 2.0m
c6cpcS020-188Hb
c6cpcS020-488Hb
c6cpcS020-588Hb
c6cpcS020-688Hb
c6cpcS020-888Hb
27 aWg SFtp - 3.0m
c6cpcS030-188Hb
c6cpcS030-488Hb
c6cpcS030-588Hb
c6cpcS030-688Hb
c6cpcS030-888Hb
27 aWg SFtp - 5.0m
c6cpcS050-188Hb
c6cpcS050-488Hb
c6cpcS050-588Hb
c6cpcS050-688Hb
c6cpcS050-888Hb
Non standard colour and length options are available to order on request.
27
C at e g o r y 6 S y s t e m s
6
250MHz
The Brand-Rex 8 Point Patch Cord Promise
1. Cat6Plus patch cords employ independently
verified Category 6 cable
2. Cat6Plus patch cords are manufactured
using leading brand Category 6 conformant
RJ-45 modular plugs
3. Cat6Plus patch cords are manufactured with
a flexible strain relief boot as standard
4. Cat6Plus patch cords are manufactured
using only quality approved assembly houses
to the exacting requirements of Brand-Rex
purchase specification
5. Cat6Plus patch cords are tested in accordance
with our AQL plan for Category 6
standards conformance
6. Cat6Plus patch cords are available in screened
and unscreened constructions
7. Cat6Plus patch cords carry a no quibble
replacement guarantee*
Compliant with ISO/IEC 61935-2
8. Cat6Plus patch cords are incorporated within
the Brand-Rex warranty programme
Brand-Rex Copper Patch Cords - Cat6Plus
Category 6 Patch Cords
* Any Brand-Rex patch cord that fails to meet the specified
requirements of Category 6 will be replaced free of charge
PRODUCT DESCRIPTION:
Brand-Rex Cat6Plus patch cords enable you to
get the optimum performance from your cabling
system. Our factory made and tested patch cords
offer you guaranteed quality, and ensure that
your system avoids the performance degradation
which inferior alternatives will give you at high
data rates. All patch cords are supplied with
boots and ID tag.
Part Number Format
C6C-PC-A-bbb-cde-F
A - Cord Type
bbb - Cord Length
cde - Colour Scheme
U
24AWG UTP
010
1 metre
(c) Cable
(d) Boot 1
(e) Boot 2
S
Solid
S
27AWG STP
020
2 metre
1 Red
1 Red
1 Red
X
Crossover
030
3 metre
4 Blue
4 Blue
4 Blue
H
Halogen Free
050
5 metre
5 Green
5 Green
5 Green
-
Standard
6 Yellow
6 Yellow
6 Yellow
8 Grey
8 Grey
8 Grey
Additional lengths on request
F - Speciality Tag
Additional colours on request
Product Part Numbering
Red
Blue
Green
Yellow
Grey
24 AWG UTP - 1.0m
C6CPCU010-111H
C6CPCU010-444H
C6CPCU010-555H
C6CPCU010-666H
C6CPCU010-888H
24 AWG UTP - 2.0m
C6CPCU020-111H
C6CPCU020-444H
C6CPCU020-555H
C6CPCU020-666H
C6CPCU020-888H
24 AWG UTP - 3.0m
C6CPCU030-111H
C6CPCU030-444H
C6CPCU030-555H
C6CPCU030-666H
C6CPCU030-888H
24 AWG UTP - 5.0m
C6CPCU050-111H
C6CPCU050-444H
C6CPCU050-555H
C6CPCU050-666H
C6CPCU050-888H
27 AWG SFTP - 1.0m
C6CPCS010-111H
C6CPCS010-444H
C6CPCS010-555H
C6CPCS010-666H
C6CPCS010-888H
27 AWG SFTP - 2.0m
C6CPCS020-111H
C6CPCS020-444H
C6CPCS020-555H
C6CPCS020-666H
C6CPCS020-888H
27 AWG SFTP - 3.0m
C6CPCS030-111H
C6CPCS030-444H
C6CPCS030-555H
C6CPCS030-666H
C6CPCS030-888H
27 AWG SFTP - 5.0m
C6CPCS050-111H
C6CPCS050-444H
C6CPCS050-555H
C6CPCS050-666H
C6CPCS050-888H
Non standard colour and length options are available to order on request.
28
C at e g o r y 6 S y s t e m s
6
250MHz
Brand-Rex Copper Connectivity - Cat6Plus Panels
Category 6 Panel with cable management
44.1
483
132
44.1
483
132
Product Part Numbering
Shielded Panel LSA Style - Black
16 Port
24 Port
C6CPNLF160K2M
C6CPNLF240K2M
Shielded Panel LSA Style - Grey
C6CPNLF160K8M
C6CPNLF240K8M
Unshielded Panel LSA Style - Black
C6CPNLU160K2M
C6CPNLU240K2M
Unshielded Panel LSA Style - Grey
C6CPNLU160K8M
C6CPNLU240K8M
Unshielded Panel 110 Style - Black
C6CPNLU16012M
C6CPNLU24012M
Unshielded Panel 110 Style - Grey
C6CPNLU16018M
C6CPNLU24018M
PRODUCT DESCRIPTION:
The Cat6Plus 19" rack mounted patch panel offers
true Category 6 component performance using
a new patented contact pin array design.
All panels are backward compatible. The modular
jacks that are used in blocks of 8 are individually
shielded to give superior shielding.
In addition to this, each panel has been designed
with a cable management/strain relief feature
built into the rear. All outlets are numerically
identified with an additional writable surface for
ease of port naming. Each panel is supplied with
cable ties, panel mounting accessories and short
form installation instructions.
PRODUCT CHARACTERISTICS:
Panel Width:19" (483mm)
Panel Height:
1U (44.1mm)
Panel Depth:
132mm
Outlet Style:Unkeyed RJ-45
Outlets:
16 or 24 ports
Colour:RAL 9005 Black
or RAL 7035 Grey
Punch Down Blocks:LSA style IDC
Wiring Standard:EIA/TIA 568A/B
Conformance:Category 6
ANSI/EIA/TIA 568B.2.1 : 2002
ISO/IEC 11801 : 2002
EN50173-1 : 2002
Approval:
(3P) Independent
3rd Party Certification
29
C at e g o r y 6 S y s t e m s
6
250MHz
Brand-Rex Copper Connectivity - Cat6Plus Jacks
Category 6 Snap-In-Jacks
Product Part Numbering
Unshielded
Shielded
LSA Style - Black
C6CJAKU0K2
C6CJAKF0K2
LSA Style - White
C6CJAKU0K3
-
110 Style - Black
C6CJAKU012
-
110 Style - White
C6CJAKU013
-
Other colours available on request.
30
PRODUCT DESCRIPTION:
The Brand-Rex Cat6Plus Snap-In-Jack offers
true Category 6 component performance using
a new patented contact array design. The jack
is backward compatible and also fully compatible
with all our UK and continental style faceplates
and products. Jacks are supplied with a short
form installation instruction.
PRODUCT CHARACTERISTICS:
Outlet Style:Unshielded and
shielded Keystone type with RJ-45 ports
Cable Entry:Top and Rear
Hole Plate Thickness:Jack will clip into sheet
material with a thickness
of 1.6mm max.
Body Material:
High impact
PBT UL94 - VO
Jack Contacts:Phosphor Bronze
Plating:
50 µm gold over 100 µm of nickel
Punch Down Blocks:LSA (Shielded)
LSA or 110 (Unshielded)
style IDC
IDC Contacts:Phosphor Bronze
Wiring Standard:
EIA/TIA 568A/B
Conformance:Category 6
ANSI/EIA/TIA 568B.2.1 : 2002
ISO/IEC 11801 : 2002
EN50173-1 : 2002
Approval:
(3P) Independent
3rd Party Certification
c at e g o r y 6 S y S t e m S
5e
100MHz
Brand-Rex Copper Connectivity - Cat6Plus Jacks
category 6 Keystone Jack
Product Part Numbering
Description
category 6 Shielded Jack
Product Part Number
c6cJaKS000cr
Compatible System Products:
Description
24 port in-line Snap-in-Jack panel
24 port Staggered Snap-in-Jack panel
24 port angled Snap-in-Jack panel
24 port coloured insert Snap-in-Jack panel - black
24 port coloured insert Snap-in-Jack panel - grey
Product Part Number
mmcpnlX24SiJ2mil
mmcpnlX24SiJ2
mmcpnlX24SiJ2man
mmcpnlX24SiJ2cii
mmcpnlX24SiJ8cii
6
250MHz
PRODUCT DESCRIPTION:
the cat6plus Snap-in-Jack offers true category 6
component performance and quick tool-free
wire termination with push down wire manager.
the metal housing of the Keystone Jack is
designed to provide a superior electromagnetic
shielding performance. the jack is fully
compatible with all our uK and continental
style faceplates and products. Jacks are supplied
with installation instructions.
PRODUCT CHARACTERISTICS:
outlet Style:
Shielded Keystone type
with unkeyed rJ-45 ports
cable entry:
rear
Hole plate thickness: 1.6mm max
body material:
Shield – bronze,
nickel-plated housing – ABS/
pc, ul94-V2 rated
body – Zinc die-casting
nickel-plated
Jack contacts:
phosphor bronze
plating:
50 μm of gold over
40 μm of nickel
punch down blocks: tool-free with push
down cable manager for
wire aWg 22-27 solid
and stranded
Wire terminations: tool-free with cap
idc contacts:
phosphor bronze with
50 μm of plated tin
Wiring Standard:
EIA/TIA 568A & EIA/TIA 568B
conformance:
category 6 compliant can support 10gbaSe-t
in a channel configuration
31
c at e g o r y 6 S y S t e m S
5e
100MHz
Brand-Rex Copper Connectivity - Cat6Plus Jacks
category 6 tool-free Jack
6
250MHz
PRODUCT DESCRIPTION:
the tool-free Jack offers true cat6 performance
and is fully compatible with brand-rex uK and
continental uni style faceplates and products.
the jacks come supplied in boxes of 12;
termination instructions are on the rear of the
box. no termination tool is required. each jack
has integral colour code wiring labels.
PRODUCT CHARACTERISTICS:
outlet Style:
unshielded with
un-keyed rJ-45 port
cable entry:
rear, top and bottom
colour:
black translucent
body materials:
ul94 – V0
Jack contacts:
phosphor bronze,
plating 50 μm gold
over 100 μm of nickel
termination block material: ul94-V0
idc contacts:
titanium copper, tin plated
Wiring Standard:
EIA/TIA 568 A & B
conformance:
backwards compatible
to the class d standards
ISO/IEC 11801 : 2002,
ANSI/EIA/TIA 568B.2.2002
compliant with the new draft cat6a standards:
ISO/IEC 11801
amendments 1.1 & 1.2
ANSI/EIA/TIA 568B.2-10
Product Part Numbering
category 6 tool-free Jack
32
Product Part Number
c6cJaKu002
C at e g o r y 6 S y s t e m s
6
250MHz
Brand-Rex Copper Connectivity - Cat6Plus Outlets
Category 6 Triple Shuttered Outlet
PRODUCT DESCRIPTION:
The Brand-Rex Cat6Plus Unshielded Triple
Outlet offers a high density outlet solution
with true Category 6 component performance.
The outlet is backward compatible with our UK
and continental UNI style faceplates providing
a 3 or 6 RJ-45 solution for high density
outlet installations.
Each outlet is fitted with a removable label
protector with individual rear cable anchors
and colour wiring detail. Every outlet is supplied
in an easy tear pack with a shortform installation
instruction, paper label and cable ties.
PRODUCT CHARACTERISTICS:
Outlet Style:Unkeyed RJ-45 Faceplate Style:
UK / Continental UNI style compatible
Backbox:Minimum 32mm depth
Colour:RAL 9010 White
Weight:
46g
Body Material:ABS
Jack Contacts:Phosphor Bronze
Plating:
50µm gold over
100µm nickel
Punch Down Blocks: 110 Style IDC
Wiring Standard:
EIA/TIA 568A/B
Conformance:Category 6
ANSI/EIA/TIA
568B.2.1:2002
ISO/IEC 11801:2002
EN50173-1:2002
Approval:
(3P) Independent
3rd Party Certification
Product Part Numbering
Unshielded
Triple Outlet - White
C6CTWOU013
33
c at e g o r y 6 S y S t e m S
6
250MHz
Brand-Rex Copper Connectivity - Cat6Plus Outlets
category 6 european Style outlet
69.90
69
PRODUCT CHARACTERISTICS:
outlet Style:
Shielded Keystone
type with unkeyed
rJ-45 ports
cable entry:
Horizontal and Vertical
colour:
ral 1013 ivory
ral 9010 White
body material:
High impact
ppo ul94 - Vo
Zinc alloy diecast
closed housing
Jack contacts:
phosphor bronze
plating:
50 µm gold over
100 µm of nickel
punch down blocks: lSa style idc
idc contacts:
phosphor bronze
Wiring Standard:
EIA/TIA 568A/B
Conformance:
ISO/IEC 11801 : 2002,
EIA/TIA 568B.2.1 : 2002
and en50173-1 : 2002
35
40.5
33
Product Part Numbering
1 Way Shielded outlet
2 Way Shielded outlet
80mm x 80mm Faceplate and back box
34
PRODUCT DESCRIPTION:
the brand-rex combined shielded outlet and
rJ-45 socket has the same proven category 6
performance as our cat6plus panels. primarily
designed for mounting into duct or trunking
using a 45mm diameter hole, the outlet can
be either flush or wall mounted by using the
80 x 80mm continental styled faceplate and
33mm back box.
White
Ivory
c6cg145Su002
c6cg145Su001
c6cg245Su002
c6cg245Su001
mmcWdoSma002
mmcWdoSma001
C at e g o r y 6 S y s t e m s
6
250MHz
Brand-Rex Copper Connectivity - Cat6Plus Cross-Connect
Category 6 Cross-Connect Tower Units
PRODUCT DESCRIPTION:
The tower mount frame provides a modular,
high density, cross-connect and cable
management system. The base tower is
supplied as a 288 pair unit but the capacity
can be increased using additional extension
frames. Tower units are supplied with wiring
bases and connector blocks for 288 pair.
PRODUCT CHARACTERISTICS:
Material: Mild steel,
Black powder coated
Dimensions:
288 pair mounting frame
546.1 x 215.9 x 235.0mm
288 pair extension mounting frame
416.0 x 215.9 x 88.9mm
Vertical cable organiser
546.1 x 215.9 x 235.0mm
Vertical cable organiser extension
426.5 x 215.9 x 228.6mm
Product Part Numbering
110 Tower, 288 pair mounting frame
C6C110TWR288P
110 Tower, 288 pair extension mounting frame
C6C110TWR288PE
35
c at e g o r y 6 S y S t e m S
6
250MHz
Brand-Rex Copper Connectivity - Cat6Plus Cross-Connect
category 6 cross-connect patchcord
PRODUCT DESCRIPTION:
Cross-connect patchcords are available in 110
to 110 style or 110 to RJ45 style. The standard
Category 6 110 connector is supplied in a 4 pair
version only.
PRODUCT CHARACTERISTICS:
conformance:
category 6
ANSI/TIA/EIA 568B.2.1
cord type:
grey 24aWg utp 110 – 110
dimensions:
50.2 x 30.9 x 9.0mm
temperature range: 0 to 50 °c (installation)
-20 to 75 °c (operational)
Product Part Numbering
110 – 110
110 – RJ45
cross connect patch cord - 1.0m
C6C110110PC010
C6C110RJ4PC010
cross connect patch cord - 1.5m
C6C110110PC015
C6C110RJ4PC015
cross connect patch cord - 2.0m
C6C110110PC020
C6C110RJ4PC020
cross connect patch cord - 3.0m
C6C110110PC030
C6C110RJ4PC030
cross connect patch cord - 4.0m
C6C110110PC040
C6C110RJ4PC040
cross connect patch cord - 5.0m
C6C110110PC050
C6C110RJ4PC050
36
C at e g o r y 6 S y s t e m s
Brand-Rex Copper Connectivity - Cat6Plus Cross-Connect
Category 6 Cross-Connect Insertion Tool
PRODUCT DESCRIPtion:
To ensure correct termination of Brand-Rex’s
Category 6 Cross Connect solution it is advised
to use a specially designed Insertion tool.
The insertion tool is used to simultaneously
terminate the 4 pairs onto Category 6 Cross
Connect wiring bases and underneath the
Category 6 connector block. A Replacement
Head is also available when the tool
becomes worn.
Product Part Numbering
Category 6 110 4 pair Insertion Tool
Category 6 110 4 pair Replacement Head
C6C1104PIT
C6C1104PITRH
37
c at e g o r y 6 S y S t e m S
6
250MHz
Brand-Rex Copper Connectivity - Cat6Plus Cross-Connect
category 6 cross-connect Wiring bases and connector blocks
PRODUCT DESCRIPTION:
Wiring Base
the category 6 110 wiring base can be supplied
as a 48, 96 or 288 pair version, with or without
legs. it can also be supplied rack mounted as
a 96, 192 or 288 pair version. designation
labels are included with the bases.
48 Pair Wiring Base Kits
a typical kit for a 48 pair wiring base
includes a basic wiring base and 12 off
4 pair connector blocks.
96 Pair Wiring Base Kits
a typical kit for a rack mounted 96 pair wiring
base includes 2 off 48 pair wiring base and
24 off 4 pair connector blocks.
Product Part Numbering
category 6 110 wiring base 48 pair with legs
C6C110WB48PL
category 6 110 wiring base 48 pair without legs
C6C110WB48P
category 6 110 wiring base 48 pair with legs, Kit
C6C110WB48PLK
category 6 110 wiring base 48 pair without legs, Kit C6C110WB48PK
category 6 110 wiring base 96 pair with legs
C6C110WB96PL
category 6 110 wiring base 96 pair without legs C6C110WB96P
category 6 110 wiring base 96 pair with legs, Kit C6C110WB96PLK
category 6 110 wiring base 96 pair without legs, Kit C6C110WB96PK
category 6 110 wiring base 288 pair with legs
C6C110WB288PL
category 6 110 wiring base 288 pair without legs
C6C110WB288P
category 6 110 wiring base 288 pair with legs, Kit C6C110WB288PLK
category 6 110 wiring base 288 pair without legs, Kit
C6C110WB288PK
category 6 110 wiring base 96 pair rack mounted, Kit C6C110WB96PRK
category 6 110 wiring base 192 pair rack mounted, Kit C6C110WB192PRK
category 6 110 wiring base 288 pair rack mounted, Kit C6C110WB288PRK
category 6 110 connector block
38
C6C110CB4P
Connector Block
the 4 pair connector is specifically designed to
exceed category 6 performance, has a robust
design and is colour coded for easy identification.
the connector is supplied in bags of 10.
PRODUCT CHARACTERISTICS:
conformance:
category 6
ANSI/TIA/EIA 568B.2.1
Connector Block
material:
Flame retardent
thermoplastic rated
ul94V-0, off-white
Wiring Base
material:
Flame retardent
thermoplastic rated
ul94V-0, off-white
contact material:
copper alloy, tin plated
C at e g o r y 5 e S y s t e m s
BRAND-REX GIGAPLUS SYSTEM
(CATEGORY 5E - CLASS D):
Key Features
• GigaPlus is a fully standards compliant
open system
• GigaPlus provides a secure,
cost-effective and flexible Cat5e
cabling system solution for running
today’s LAN protocols and high speed
applications such as 1000Base-T
• GigaPlus exceeds the requirements of
ISO/IEC 11801 : 2002 and EN 50173-1 :
2002 for Class D channels and
ANSI/TIA/EIA 568B.2 : 2002
Category 5e
• Reduced bit error rate as a result
of system margins that exceed
the standards
• GigaPlus is third certified by
3P and GHMT
• System available in both shielded
and unshielded options
• GigaPlus is interoperable and
backwards compatible
• GigaPlus can be installed within
hostile environments, contact
Brand-Rex for recommendations
and advice
• GigaPlus is Power over Ethernet
compatible and supports
- VoIP
- Wireless LAN access points
- Security cameras
• GigaPlus is suitable for wireless
node connection
39
Download PDF
Similar pages