HIGHLIGHTS
AREA OF APPLICATION
Solar battery chargers by Sickert & Hafner
conserve the vehicle battery’s charge and are
preferably used in stored vehicles.
PERFORMANCE DATA
Our solar battery charges were developed in
accordance with the specifications of the
automotive industry and thus meet all
Solar battery charger CSM 1000
Made in Germany
requirements toward composition, function
and performance.
BATTERY CARE WITH SOLAR
BATTERY CHARGERS
The solar battery charger CSM 1000 is ideally
suited to render the battery care of stored
vehicles more efficient and economic.
It maintains the charge status of the battery
throughout the period of the vehicle’s storage,
Maintains the charge status of the
vehicle battery
frequently in fact improving it. The regular
Corresponds with the high requirements
inspection intervals required by car
of the automotive industry
manufacturers can thus be significantly
reduced.
EFFICIENCY
The use of the solar battery charger CSM 1000
considerably lowers the cost and time spent on
Recommended for battery care by many
car manufacturers
Reduces the cost and time spent on
battery care
taking the acquisition cost of the modules into
consideration.
The use of solar battery chargers saves on
•
the disconnection of the battery when
Suitable for almost all vehicle types
thanks to the OBD2 plug
storing the vehicle
•
the inspection of the battery when
storing the vehicle (new vehicles)
•
the recharging of the battery
•
at least every other inspection interval
The solar battery charger CSM 1000 must only
be hung into the vehicle once – on storage.
REQUIREMENTS
The only requirement that needs to be met to
charge a vehicle with the assistance of a solar
battery charger is the presence of an OBD2
connection in the vehicle. As virtually all
vehicles feature such a connection these days,
the solar battery charger can be utilised for
every vehicle, irrespective of type and brand.
High costs in vehicles stored long-term due to the self-discharge of the
starter battery
In stored vehicles the on-board battery is subject to a not
inconsiderable level of self-discharge, due to
comprehensive vehicle electronics and temperature
influences.
The battery’s charge status decreases permanently.
Once the battery’s performance has dropped under 60%,
the batteries of most new vehicles need to be replaced
with new ones for quality assurance reasons.
Frequently, after two months of idle time the vehicle
cannot be started. The battery is permanently damaged.
Defective batteries are a bothersome and expensive issue
to both clients and dealers.
By utilising the solar battery charger, the loss of capacity
can be compensated.
For this purpose the solar battery charger need only be
positioned behind the front windscreen of the vehicle and
connected to the vehicle’s battery via the OBD2 plug.
Solarbatt
battery
chargerCSM
ASM1000
600
Solar
ery charger
PROPERTIES AND BENEFITS
HANDLING
Easy handling. The solar battery charger is
Scope of delivery
Accessories
Photo: Ready-to-use solar battery charger with
electronic unit, OBD2 plug and 1.5 m connection
cable, operating instructions in standard packaging.
Photo: Transport and storage container for the
transport and safe storage of up to 10 solar battery
chargers.
Connecting plug
Additional solar battery chargers
As an alternative to the standard OBD2 plug,
the solar battery charger can also be orders
with a cigarette lighter plug or – for direct
connection to the poles of the battery – with
charge clips.
Up to two additional solar battery chargers can
be connected to a solar battery charger to
boost performance. The additional solar
battery chargers correspond with the standard
solar battery chargers – instead of the
electronic unit, however, the scope of delivery
contains a connection cable (length 0.7 m and
a 3.5/1.5 mm barrel connector).
simply placed behind the front windscreen and
fastened at the rear-view mirror mount by
means of a holding cord.
DIVERSITY OF CONNECTIONS
Connection with the on-board battery via the
OBD2 plug, alternatively also via the cigarette
lighter or directly with the battery via charge
clips.
ROBUST
Extremely robust design with a break-proof
frame made of polycarbonate and a flexible
carrier structure of the solar panel.
Tear-proof connection cable (up to 5 kg) and
stable plug connections with bayonet lock
against accidental unplugging.
TRANSLUCENT
Transparent frame for the avoidance of core
shadows and resultant changes of colour on
dashboards in the event of long-term use.
HEAT-RESISTANT
Emission-free and heat-resistant materials to
protect high-quality vehicle furnishings.
Technical data and design
SOLAR PANEL
•
The
charger
ASM
600
is aissolar-powered
charging
system
for for
the the
charging
andand
Thesolar
solarbatter
battery
charger
CSM
1000
a solar-powered
charging
system
charging
charge
ofof
1212/24
volt lead
batteries.
It can be
combined
with a maximum
of two of
chargeconservation
conservation
voltstarter
lead starter
batteries.
It can
be combined
with a maximum
additional
solar battery
chargers
to boosttoperformance.
two additional
solar battery
chargers
boost performance
•
The
panel isisa implemented
in panel
state-of-the-art
thin-film
consists
of a
Thesolar
solar panel
monocristalline
and consists
of a newtechnology
foil design.and
It is softly
embedded
glass/film
structure.
It is softly
embedded
in an
external break-proof
frame
of transparent
in an external
break-proof
frame
made of
transparent
polycarbonate.
Allmade
corners
and edges are
polycarbonate.
Allno
corners
andtoedges
are rounded
so (interior)
that no damage
to the
vehicle’s
surface
rounded so that
damage
the vehicle’s
surface
can occur.
A holding
cord
(undyed,
(interior)
can occur.
holding cord
(undyed, cotton)
length
is integrated
intoalso
cotton) with
lengthAadjustment
is integrated
into thewith
frame,
for adjustment
safe attachment.
The frame
the
frame, for safe
attachment.electronic
The frameunit.
also incorporates a miniaturised electronic unit.
incorporates
a miniaturised
•
The
volt (+/0.2(+/-0,1
volt) and
compensated
in
Thecharge
chargesystem
systemisisvoltage
voltagelimited
limitedtoto14.2
14,3/28,6
volt
volt)temperature
and temperature
compensated
accordance
with
the
charge
characteristics
of
lead
accumulators.
in accordance with the charge characteristics of lead accumulators.
The
charger
during
fullfull
solar
irradiation
(1000
W/m²)
is is
Therated
ratedcharge
chargecurrent
currentper
persolar
solarbattery
battery
charger
during
solar
irradiation
(1000
W/m2)
255 mA. The age-related loss of performance within the first six months, common to all solar
640/320 mA. The age-related loss of performance within the first six months, common to all
battery chargers, amounts to a maximum of 15%.
solar battery chargers, amounts to a maximum of 15%.
The solar battery charger and the electronics are short-circuit protected and reverse current
The solar battery charger and the electronics are short-circuit protected and reverse current
protected.
protected.
It is designed to operate continuously at ambient temperatures between – 40°C and + 90°C.
It is designed to operate continuously at ambient temperatures between -40°C and +85°C.
The charge plug is designed as an OBD2 plug. Alternatively, an adapter cable (3 m long) with a
The charge plug is designed as an OBD2 plug. Alternatively, an adapter cable (3m long) with
DIN connector for the charge plug and two battery charge clips (small) on the other end is
a DIN connector for the charge plug and two battery charge clips (small) on the other end is
available for direct connection to the battery poles.
available for direct connection to the battery poles.
The connection cable (approx. 1.5 m long, from frame to plug) is made of wear and tearThe connection cable (approx. 1,5 m long, from frame to plug) is made of wear and tear-resistant
resistant material and both break-proof and emission-free at temperatures between – 40°C and
material and both break-proof and emission-free at temperatures between -40°C and +85°C.
+ 90°C.
Optionally, an additional solar battery charger (without electronic unit) is available to boost the
Optionally, an additional solar battery charger (without electronic unit) is available to boost the
chargingperformance.
performance.
This
consists
a connection
cable
of 0,7
mlength
in length
a 3.5/1.5
barrel
charging
This
consists
of of
a connection
cable
of 0.7
m in
andand
a 3.5/1.5
barrel
connector.
A
maximum
of
two
of
these
additional
solar
battery
chargers
can
be
connected
connector. A maximum of two of these additional solar battery chargers can be connected to to
thetwo
twoinputs
inputs
the
CSM
1000.
the
ofof
the
ASM
600.
Solar panel with metamorphous cells that are
characterised by a long service life (30 years),
constant output and insignificant ageing
effects – German quality product.
SERVICE LIFE
High anticipated useful life of approx. 30 years
in continuous operation – the initial outlay of
the wear and tear-free system is recouped
many times over.
PREVENTS SELF-DISCHARGE
•
The self-discharge of the battery is prevented,
thus maintaining its startability. Permanent
damage to the battery from sulphation is
avoided.
IMPROVEMENT OF QUALITY
Thanks to the permanent trickle charge
•
•
•
provided by the CSM 1000 solar battery
charger, the formation of sulphates is
prevented and the battery’s storage capacity is
•
maintained.
The vehicle remains able to start and the
battery does not suffer any damage.
Complaints decrease while quality increases.
Sickert & Hafner GmbH
Automotive Systems
Berliner Straße 9
63628 Bad Soden – Salmünster
Germany
•
Phone: +49 (0)6056/900 570
Fax: +49 (0)6056/900 5711
Email: sales@sickert-hafner.de
www.sickert-hafner.de
Download PDF
Similar pages