Dual Port, Xpressview,
225 MHz HDMI Receiver
ADV7612
Data Sheet
FEATURES
Dedicated, flexible audio output port
Super audio CD (SACD) with DSD output interface
HBR audio
Dolby® TrueHD
DTS-HD Master Audio™
General
Interrupt controller with two interrupt outputs
Standard Identification (STDI) circuit
Highly flexible 36-bit pixel output interface
Internal EDID RAM
Any-to-any 3 × 3 color space conversion (CSC) matrix
2-layer PCB design supported
100-lead LQFP_EP, 14 mm × 14 mm package
Qualified for Automotive Applications
High-Definition Multimedia Interface (HDMI®) 1.4a features
supported
All mandatory and additional 3D video formats supported
Extended colorimetry, including sYCC601, Adobe RGB,
Adobe YCC 601, xvYCC extended gamut color
CEC 1.4-compatible
HDMI receiver
225 MHz maximum TMDS clock frequency
Xpressview fast switching of HDMI ports
36-/30-bit Deep Color and 24-bit color support
High-bandwidth Digital Content Protection (HDCP) 1.4
support with internal HDCP keys
HDCP repeater support
Up to 127 KSVs supported
Integrated CEC controller
Programmable HDMI equalizer
5 V detect and Hot Plug assert for each HDMI port
Audio support
Audio support including high bit rate (HBR) and direct
stream digital (DSD)
S/PDIF (IEC 60958-compatible) digital audio support
Supports up to four I2S outputs
Advanced audio mute feature
APPLICATIONS
Projectors
Automotive
Video conferencing
HDTVs
AVR, HTiB
Soundbars
Video switches
HS/VS
HDCP
KEYS
FIELD/DE
36
COMPONENT
PROCESSOR
LLC
DATA
HDMI1
TMDS
DDC
HDMI2
DEEP
COLOR
HDMI Rx
4
I2 S
S/PDIF
DSD
HBR
MCLK
SCLK
LRCLK
TMDS
DDC
OUTPUT MUX
FAST
SWITCH
OUTPUT MUX
FUNCTIONAL BLOCK DIAGRAM
HS
VS/FIELD
DE
LLC
36-BIT
YCbCr/RGB
AUDIO
OUTPUT 5
MCLK
SCLK
NOTES
1. LRCLK IS ACCESSIBLE THROUGH THE AP5 PIN.
09308-001
ADV7612
Figure 1.
Rev. E
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2010–2014 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
ADV7612* PRODUCT PAGE QUICK LINKS
Last Content Update: 02/23/2017
COMPARABLE PARTS
REFERENCE MATERIALS
View a parametric search of comparable parts.
Technical Articles
• Enabling HDMI in the Automotive Segment
EVALUATION KITS
• ADV7612 and ADV7511 Evaluation Board
DESIGN RESOURCES
• ADV7612 Material Declaration
DOCUMENTATION
• PCN-PDN Information
Application Notes
• Quality And Reliability
• AN-1180: Optimizing Video Platforms for Automated
Post-Production Self-Tests
• Symbols and Footprints
• AN-1260: Crystal Design Considerations for Video
Decoders, HDMI Receivers, and Transceivers
DISCUSSIONS
Data Sheet
• ADV7612: Dual Port, Xpressview, 225 MHz HDMI Receiver
Data Sheet
User Guides
View all ADV7612 EngineerZone Discussions.
SAMPLE AND BUY
Visit the product page to see pricing options.
• UG-216: Dual Port Xpressview Advantiv HDMI Receiver
Functionality and Features
TECHNICAL SUPPORT
• UG-295: Advantiv EVAL-ADV7612-7511 Video Evaluation
Board
Submit a technical question or find your regional support
number.
REFERENCE DESIGNS
DOCUMENT FEEDBACK
• CN0224
Submit feedback for this data sheet.
This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not
trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.
ADV7612
Data Sheet
TABLE OF CONTENTS
Features .............................................................................................. 1
Power-Up Sequence ................................................................... 11
Applications ....................................................................................... 1
Power-Down Sequence .............................................................. 11
Functional Block Diagram .............................................................. 1
Functional Overview...................................................................... 12
Revision History ............................................................................... 2
HDMI Receiver........................................................................... 12
General Description ......................................................................... 3
Component Processor ............................................................... 12
Detailed Functional Block Diagram .......................................... 3
Other Features ............................................................................ 12
Specifications..................................................................................... 4
Pixel Input/Output Formatting .................................................... 13
Electrical Characteristics ............................................................. 4
Pixel Data Output Modes Features .......................................... 13
Data and I C Timing Characteristics ......................................... 5
Outline Dimensions ....................................................................... 17
Absolute Maximum Ratings............................................................ 7
Ordering Guide .......................................................................... 17
Package Thermal Performance ................................................... 7
Automotive Products ................................................................. 17
2
ESD Caution .................................................................................. 7
Pin Configuration and Function Descriptions ............................. 8
Power Supply Sequencing .............................................................. 11
REVISION HISTORY
1/14—Rev. D to Rev. E
6/11—Rev. B to Rev. C
Changes to PLL Supply Current Parameter, Table 1 .................... 4
Changes to Pin 96 and Pin 100, Table 4....................................... 10
Changes to Figure 7 ...........................................................................9
Updated Outline Dimensions ....................................................... 19
6/11—Rev. A to Rev. B
5/12—Rev. C to Rev. D
Changes to Features Section............................................................ 1
Changes to General Description Section and Figure 2 ............... 3
Added Endnote 3 (Table 1) ............................................................. 4
Deleted TDM Serial Timing Parameter (Table 2) ........................ 5
Changes to Figure 5 .......................................................................... 6
Deleted Figure 6 ................................................................................ 7
Changed Pin 75 to AP1 in Figure 7 and Table 4........................... 9
Changed Pin 89 and Pin 90 Descriptions (Table 4) ................... 10
Changes to HDMI Receiver and Other Features Sections ........ 12
Deleted Time-Division Multiplexed (TDM) Mode Section
and Figure 9 ..................................................................................... 13
Added Endnote 1 in Pixel Input/Output Formatting Section and
Endnote 1 to Table 5 ....................................................................... 15
Changes to Ordering Guide .......................................................... 18
Changes to Data Output Transition Time (t11), Table 2 ...............5
Changes to Pin 17 and Pin 18 Description, Table 4 ................... 10
Changes to Pin 87 and Pin 89 Description, Table 4 ................... 11
4/11—Rev. 0 to Rev. A
Changes to Features Section ............................................................1
Changes to Ordering Guide .......................................................... 19
Added Automotive Products Section .......................................... 19
11/10—Revision 0: Initial Version
Rev. E | Page 2 of 20
Data Sheet
ADV7612
GENERAL DESCRIPTION
The ADV7612 is offered in automotive, professional (no HDCP),
and industrial versions. The operating temperature range is
−40°C to +85°C.
The UG-216 contains critical information that must be used in
conjunction with the ADV7612.
The ADV7612 is a high quality Xpressview™ fast switching
HDMI®-capable receiver. It incorporates a dual input HDMIcapable receiver that supports all mandatory 3D TV formats
defined in HDMI 1.4a specification, HDTV formats up to
1080p 36-bit Deep Color, and display resolutions up to UXGA
(1600 × 1200 at 60 Hz).
It integrates a CEC controller that supports the capability
discovery and control (CDC) feature.
The ADV7612 incorporates Xpressview fast switching on both
input HDMI ports. Using Analog Devices, Inc., hardware-based
HDCP engine that minimizes software overhead, Xpressview
technology allows fast switching between both HDMI input ports
in less than 1 second.
Each HDMI port has dedicated 5 V detect and Hot Plug™ assert
pins. The HDMI receiver also includes an integrated programmable equalizer that ensures robust operation of the interface
with long cables.
The ADV7612 offers a flexible audio output port for audio data
extraction from the HDMI stream. HDMI audio formats,
including SACD via DSD and HBR, are supported by ADV7612.
The HDMI receiver has advanced audio functionality, such as a
mute controller that prevents audible extraneous noise in the
audio output.
The ADV7612 contains one main component processor (CP)
that processes the video signals from the HDMI receiver. It
provides features such as contrast, brightness and saturation
adjustments, STDI detection block, free run, and synchronization
alignment controls.
Fabricated in an advanced CMOS process, the ADV7612 is
provided in a 14 mm × 14 mm, 100-lead surface-mount LQFP_EP,
RoHS-compliant package, and is specified over the −40°C to
+85°C temperature range.
DETAILED FUNCTIONAL BLOCK DIAGRAM
CS
CEC
RXA_5V
RXB_5V
HPA_A/INT2*
HPA_B
DDCA_SDA
DDCA_SCL
DDCB_SDA
DDCB_SCL
RXA_C±
RXB_C±
RXA_0±
RXA_1±
RXA_2±
RXB_0±
RXB_1±
RXB_2±
CEC
CONTROLLER
CONTROL
INTERFACE
I2C
CONTROL
AND DATA
5V DETECT
AND HPD
CONTROLLER
EDID
REPEATER
CONTROLLER
PLL
EQUALIZER
BACKEND
COLOR SPACE
CONVERSION
INTERRUPT
CONTROLLER
(INT1, INT2)
HDMI
PROCESSOR
HDCP
EEPROM
HDCP
ENGINE
SAMPLER
COMPONENT
PROCESSOR
A
B
C
DATA
PREPROCESOR
AND COLOR
SPACE
CONVERSION
PACKET/
INFOFRAME
MEMORY
PACKET
PROCESSOR
EQUALIZER
12
12
12
SAMPLER
MUTE
AUDIO
PROCESSOR
AUDIO OUTPUT FORMATTER
SCL
SDA
OUTPUT FORMATTER
DPLL
XPressView ™
FAST SWITCHING
XTALP
XTALN
P0 TO P11
P12 TO P23
P24 TO P25
LLC
HS
VS/FIELD/ALSB
DE
INT1
INT2*
AP1
AP2
AP3
AP4
AP5
SCLK/INT2*
MCLK/INT2*
AP0
*INT2 CAN BE ONLY OUTPUT ON ONE OF THE PINS: SCLK/INT2, MCLK/INT2, OR HPA_A/INT2.
Figure 2. Detailed Functional Block Diagram
Rev. E | Page 3 of 20
09308-002
ADV7612
ADV7612
Data Sheet
SPECIFICATIONS
At DVDD = 1.71 V to 1.89 V, DVDDIO = 3.14 V to 3.46 V, PVDD = 1.71 V to 1.89 V, TVDD = 3.14 V to 3.46 V, CVDD = 1.71 V to 1.89 V,
Operating temperature range, unless otherwise noted.
ELECTRICAL CHARACTERISTICS
Table 1.
Parameter
DIGITAL INPUTS 1
Input High Voltage
Input Low Voltage
Input Current
Input Capacitance
DIGITAL INPUTS (5 V TOLERANT)1, 2
Input High Voltage
Input Low Voltage
Input Current
DIGITAL OUTPUTS1
Output High Voltage
Output Low Voltage
High Impedance Leakage
Current
Output Capacitance
POWER REQUIREMENTS 3,4
Digital Core Power Supply
Digital I/O Power Supply
PLL Power Supply
Terminator Power Supply
Comparator Power Supply
Digital Core Supply Current
Digital I/O Supply Current
PLL Supply Current
Terminator Supply Current
Comparator Supply Current
POWER-DOWN CURRENTS3,6
Digital Core Supply Current
Digital I/O Supply Current
PLL Supply Current
Terminator Supply Current
Comparator Supply Current
Power-Up Time
Symbol
Test Conditions/Comments
Min
VIH
VIH
VIL
VIL
IIN
XTALN and XTALP
Other digital inputs
XTALN and XTALP
Other digital inputs
RESET pin
CS pin
Other digital inputs
1.2
2
Typ
±45
±45
±10
CIN
VIH
VIL
IIN
2.6
VOH
VOL
ILEAK
2.4
−82
VS/FIELD/ALSB pin
±35
HPA_A/INT2, HPA_B pin
Digital inputs other than XTALN
and XTALP
±10
1.71
3.14
1.71
3.14
1.71
Dual 1080p60 12 bit with BG 5port
Dual 1080p60 12 bit with BG5 port
Dual 1080p60 12 bit with BG5 port
Dual 1080p60 12 bit with BG5 port
Dual 1080p60 12 bit with BG5 port
IDVDD_PD
IDVDDIO_PD
IPVDD_PD
ITVDD_PD
ICVDD_PD
tPWRUP
Unit
0.4
0.8
±60
±60
10
V
V
V
V
µA
µA
µA
pF
0.8
+82
V
V
µA
0.4
±60
V
V
µA
±82
µA
µA
20
pF
1.8
3.3
1.8
3.3
1.8
149.5
9.9
36.9
121.4
187.0
1.89
3.46
1.89
3.46
1.89
201.9
178.5
39.2
134.5
210.9
V
V
V
V
V
mA
mA
mA
mA
mA
0.3
1.3
1.5
0.1
1.3
25
0.4
1.7
1.8
0.3
1.7
mA
mA
mA
mA
mA
ms
COUT
DVDD
DVDDIO
PVDD
TVDD
CVDD
IDVDD
IDVDDIO
IPVDD
ITVDD
ICVDD
Max
Data guaranteed by characterization.
The following pins are 5 V tolerant: DDCA_SCL, DDCA_SDA, DDCB_SCL, DDCB_SDA, RXA_5V, and RXB_5V.
Data recorded during lab characterization
4
Maximum current consumption values are recorded with maximum rated voltage supply levels, MoireX video pattern, and at maximum rated temperature.
5
BG = background.
6
Power-Down Mode 0 (IO map, Register 0x0C = 0x62), ring oscillator powered down (HDMI map, Register 0x48 = 0x01), and DDC pads off (HDMI map, Register 0x73 = 0x03).
1
2
3
Rev. E | Page 4 of 20
Data Sheet
ADV7612
DATA AND I2C TIMING CHARACTERISTICS
Table 2.
Parameter
CLOCK AND CRYSTAL
Crystal Frequency, XTALP
Crystal Frequency Stability
LLC Frequency Range
I2C PORTS
SCL Frequency
SCL Minimum Pulse Width High 1
SCL Minimum Pulse Width Low1
Start Condition Hold Time1
Start Condition Setup Time1
SDA Setup Time1
SCL and SDA Rise Time1
SCL and SDA Fall Time1
Stop Condition Setup Time1
RESET FEATURE
Reset Pulse Width
CLOCK OUTPUTS
LLC Mark-Space Ratio1
DATA AND CONTROL OUTPUTS 2
Data Output Transition Time1
I2S PORT, MASTER MODE
SCLK Mark-Space Ratio1
LRCLK Data Transition Time1
I2S Data Transition Time1
1
2
Symbol
Test Conditions/Comments
Min
Typ
Max
Unit
±50
170
MHz
ppm
MHz
28.63636
13.5
400
t1
t2
t3
t4
t5
t6
t7
t8
0.6
kHz
ns
µs
ns
ns
ns
ns
ns
µs
5
ms
600
1.3
600
600
100
300
300
t9:t10
45:55
t11
t12
End of valid data to negative clock edge
Negative clock edge to start of valid data
t15:t16
t17
t18
t19
t20
End of valid data to negative SCLK edge
Negative SCLK edge to start of valid data
End of valid data to negative SCLK edge
Negative SCLK edge to start of valid data
1.0
0.0
45:55
Data guaranteed by characterization.
With the DLL block on output clock bypassed.
Rev. E | Page 5 of 20
55:45
% duty cycle
2.2
0.3
ns
ns
55:45
10
10
5
5
% duty cycle
ns
ns
ns
ns
ADV7612
Data Sheet
Timing Diagrams
t3
t5
t3
SDA
t6
t1
t2
t4
t7
9308-003
SCL
t8
2
Figure 3. I C Timing
t9
t10
LLC
t11
9308-004
t12
P0 TO P23, HS,
VS/FIELD/ALSB, DE
Figure 4. Pixel Port and Control SDR Output Timing
t15
SCLK
t16
t17
LRCLK
t18
t19
MSB
MSB – 1
t20
I2S
I2S MODE
t19
MSB
I2S
RIGHT-JUSTIFIED
MODE
MSB – 1
t20
t19
MSB
LSB
t20
NOTES
1. LRCLK IS A SIGNAL ACCESSIBLE VIA AP5 PIN.
2. I2S SIGNALS ARE ACCESSIBLE VIA THE AP1 TO AP4 PINS.
Figure 5. I2S Timing
Rev. E | Page 6 of 20
09308-005
I2S
LEFT-JUSTIFIED
MODE
Data Sheet
ADV7612
ABSOLUTE MAXIMUM RATINGS
PACKAGE THERMAL PERFORMANCE
Table 3.
Parameter
DVDD to GND
PVDD to GND
DVDDIO to GND
CVDD to GND
TVDD to GND
Digital Inputs Voltage to GND
5 V Tolerant Digital Inputs to
GND1
Digital Outputs Voltage to GND
XTALP, XTALN
SCL/SDA Data Pins to DVDDIO
Maximum Junction
Temperature (TJ MAX)
Storage Temperature Range
Infrared Reflow Soldering (20 sec)
1
Rating
2.2 V
2.2 V
4.0 V
2.2 V
4.0 V
GND − 0.3 V to DVDDIO + 0.3 V
5.3 V
To reduce power consumption when using the ADV7612, the
user is advised to turn off the unused sections of the part.
Due to the printed circuit board (PCB) metal variation and,
therefore, variation in PCB heat conductivity, the value of θJA
may differ for various PCBs.
The most efficient measurement solution is obtained using the
package surface temperature to estimate the die temperature
because this eliminates the variance associated with the θJA value.
GND − 0.3 V to DVDDIO + 0.3 V
−0.3 V to PVDD + 0.3 V
DVDDIO − 0.3 V to DVDDIO +
3.6 V
125°C
The maximum junction temperature (TJ MAX) of 125°C must not be
exceeded. The following equation calculates the junction temperature using the measured package surface temperature and applies
only when no heat sink is used on the device under test (DUT):
−60°C to +150°C
260°C
where:
TS is the package surface temperature (°C).
ΨJT = 0.3°C/W for the 100-lead LQFP_EP.
The following inputs are 3.3 V inputs but are 5 V tolerant: DDCA_SCL,
DDCA_SDA, DDCB_SCL, and DDCB_SDA.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
(
TJ = TS + Ψ JT × WTOTAL
)
WTOTAL = ((PVDD × IPVDD) + (0.05 × TVDD × ITVDD) + (CVDD ×
ICVDD) + (DVDD × IDVDD) + (DVDDIO × IDVDDIO))
where 0.05 is 5% of the TVDD power that is dissipated on the
part itself.
ESD CAUTION
Rev. E | Page 7 of 20
ADV7612
Data Sheet
RXA_5V
DDCA_SDA
DDCA_SCL
HPA_B
RXB_5V
DDCB_SDA
DDCB_SCL
CEC
DVDD
XTALN
XTALP
PVDD
CS
RESET
INT1
SDA
SCL
DVDD
MCLK/INT2
AP5
SCLK/INT2
AP4
AP3
AP2
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
PIN 1
INDICATOR
P9
RXB_0+
18
58
P10
TVDD
19
57
P11
RXB_1–
20
56
P12
RXB_1+
21
55
P13
TVDD
22
54
DVDDIO
RXB_2–
23
53
P14
RXB_2+
24
52
P15
CVDD
25
51
P16
50
59
NC
17
49
P8
RXB_0–
P17
60
48
16
P18
P7
TVDD
47
61
P19
15
46
DVDD
RXB_C+
P20
62
45
14
P21
P6
RXB_C–
44
63
P22
P5
13
43
64
CVDD
TOP VIEW
(Not to Scale)
P23
12
42
P4
RXA_2+
LLC
65
41
ADV7612
DVDD
11
40
P3
RXA_2–
P24
66
39
10
P25
P2
TVDD
38
67
P26
9
37
P1
RXA_1+
DVDDIO
68
36
8
P27
P0
RXA_1–
35
69
P28
7
34
DVDDIO
TVDD
P29
70
33
6
P30
DE
RXA_0+
32
71
P31
5
31
HS
RXA_0–
P32
72
30
4
P33
VS/FIELD/ALSB
TVDD
29
73
DVDDIO
3
28
AP0
RXA_C+
P34
74
27
AP1
2
26
75
RXA_C–
NC
1
P35
CVDD
NOTES
1. NC = NO CONNECT. DO NOT CONNECT TO THIS PIN.
2. CONNECT EXPOSED PAD (PIN0) TO GROUND (BOTTOM).
09308-008
HPA_A/INT2
100
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
Figure 6. Pin Configuration
Table 4. Pin Function Descriptions
Pin
No.
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Mnemonic
GND
CVDD
RXA_C−
RXA_C+
TVDD
RXA_0−
RXA_0+
TVDD
RXA_1−
RXA_1+
TVDD
RXA_2−
RXA_2+
CVDD
RXB_C−
Type
Ground
Power
HDMI input
HDMI input
Power
HDMI input
HDMI input
Power
HDMI input
HDMI input
Power
HDMI input
HDMI input
Power
HDMI input
Description
Ground.
HDMI Analog Block Supply Voltage (1.8 V).
Digital Input Clock Complement of Port A in the HDMI Interface.
Digital Input Clock True of Port A in the HDMI Interface.
Terminator Supply Voltage (3.3 V).
Digital Input Channel 0 Complement of Port A in the HDMI Interface.
Digital Input Channel 0 True of Port A in the HDMI Interface.
Terminator Supply Voltage (3.3 V).
Digital Input Channel 1 Complement of Port A in the HDMI Interface.
Digital Input Channel 1 True of Port A in the HDMI Interface.
Terminator Supply Voltage (3.3 V).
Digital Input Channel 2 Complement of Port A in the HDMI Interface.
Digital Input Channel 2 True of Port A in the HDMI Interface.
HDMI Analog Block Supply Voltage (1.8 V).
Digital Input Clock Complement of Port B in the HDMI Interface.
Rev. E | Page 8 of 20
Data Sheet
Pin
No.
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
Mnemonic
RXB_C+
TVDD
RXB_0−
RXB_0+
TVDD
RXB_1−
RXB_1+
TVDD
RXB_2−
RXB_2+
CVDD
NC
P35
P34
DVDDIO
P33
P32
P31
P30
P29
P28
P27
DVDDIO
P26
P25
P24
DVDD
LLC
P23
P22
P21
P20
P19
P18
P17
NC
P16
P15
P14
DVDDIO
P13
P12
P11
P10
P9
P8
P7
DVDD
P6
P5
P4
ADV7612
Type
HDMI input
Power
HDMI input
HDMI input
Power
HDMI input
HDMI input
Power
HDMI input
HDMI input
Power
No connect
Digital video output
Digital video output
Power
Digital video output
Digital video output
Digital video output
Digital video output
Digital video output
Digital video output
Digital video output
Power
Digital video output
Digital video output
Digital video output
Power
Digital video output
Digital video output
Digital video output
Digital video output
Digital video output
Digital video output
Digital video output
Digital video output
No connect
Digital video output
Digital video output
Digital video output
Power
Digital video output
Digital video output
Digital video output
Digital video output
Digital video output
Digital video output
Digital video output
Power
Digital video output
Digital video output
Digital video output
Description
Digital Input Clock True of Port B in the HDMI Interface.
Terminator Supply Voltage (3.3 V).
Digital Input Channel 0 Complement of Port B in the HDMI Interface.
Digital Input Channel 0 True of Port B in the HDMI Interface.
Terminator Supply Voltage (3.3 V).
Digital Input Channel 1 Complement of Port B in the HDMI Interface.
Digital Input Channel 1 True of Port B in the HDMI Interface.
Terminator Supply Voltage (3.3 V).
Digital Input Channel 2 Complement of Port B in the HDMI Interface.
Digital Input Channel 2 True of Port B in the HDMI Interface.
HDMI Analog Block Supply Voltage (1.8 V).
No connect.
Video Pixel Output Port.
Video Pixel Output Port.
Digital I/O Supply Voltage (3.3 V).
Video Pixel Output Port.
Video Pixel Output Port.
Video Pixel Output Port.
Video Pixel Output Port.
Video Pixel Output Port.
Video Pixel Output Port.
Video Pixel Output Port.
Digital I/O Supply Voltage (3.3 V).
Video Pixel Output Port.
Video Pixel Output Port.
Video Pixel Output Port.
Digital Core Supply Voltage (1.8 V).
Line-Locked Output Clock for the Pixel Data (Range is 13.5 MHz to 170 MHz).
Video Pixel Output Port.
Video Pixel Output Port.
Video Pixel Output Port.
Video Pixel Output Port.
Video Pixel Output Port.
Video Pixel Output Port.
Video Pixel Output Port.
No connect.
Video Pixel Output Port.
Video Pixel Output Port.
Video Pixel Output Port.
Digital I/O Supply Voltage (3.3 V).
Video Pixel Output Port.
Video Pixel Output Port.
Video Pixel Output Port.
Video Pixel Output Port.
Video Pixel Output Port.
Video Pixel Output Port.
Video Pixel Output Port.
Digital Core Supply Voltage (1.8 V).
Video Pixel Output Port.
Video Pixel Output Port.
Video Pixel Output Port.
Rev. E | Page 9 of 20
ADV7612
Data Sheet
Pin
No.
66
67
68
69
70
71
72
73
Mnemonic
P3
P2
P1
P0
DVDDIO
DE
HS
VS/FIELD/ALSB
Type
Digital video output
Digital video output
Digital video output
Digital video output
Power
Miscellaneous digital
Digital video output
Digital video output
74
AP0
Miscellaneous digital
75
AP1
Miscellaneous digital
76
AP2
Miscellaneous digital
77
AP3
Miscellaneous ditial
78
AP4
Miscellaneous ditial
79
SCLK/INT2
Miscellaneous digital
80
AP5
Miscellaneous
81
MCLK/INT2
Miscellaneous
82
83
84
85
DVDD
SCL
SDA
INT1
Power
Miscellaneous digital
Miscellaneous digital
Miscellaneous digital
86
RESET
Miscellaneous digital
87
CS
Miscellaneous digital
88
89
PVDD
XTALP
Power
Miscellaneous analog
90
XTALN
Miscellaneous analog
91
92
93
94
95
96
97
98
99
100
DVDD
CEC
DDCB_SCL
DDCB_SDA
RXB_5V
HPA_B
DDCA_SCL
DDCA_SDA
RXA_5V
HPA_A/INT2
Power
Digital input/output
HDMI input
HDMI input
HDMI input
Miscellaneous digital
HDMI input
HDMI input
HDMI input
Miscellaneous digital
Description
Video Pixel Output Port.
Video Pixel Output Port.
Video Pixel Output Port.
Video Pixel Output Port.
Digital I/O Supply Voltage (3.3 V).
DE (data enable) is a signal that indicates active pixel data.
HS is a horizontal synchronization output signal.
VS is a vertical synchronization output signal. FIELD is a field synchronization output
signal in all interlaced video modes. VS or FIELD can be configured for this pin. ALSB
allows selection of the I2C address.
Audio Output Pin. Pin AP0 to Pin AP5 can be configured to output S/PDIF digital audio
output, HBR, DSD, DST, or I2S.
Audio Output Pin. Pin AP0 to Pin AP5 can be configured to output S/PDIF digital audio
output, HBR, DSD, DST, or I2S.
Audio Output Pin. Pin AP0 to Pin AP5 can be configured to output S/PDIF digital audio
output, HBR, DSD, DST, or I2S.
Audio Output Pin. Pin AP0 to Pin AP5 can be configured to output S/PDIF digital audio
output, HBR, DSD, DST, or I2S.
Audio Output Pin. Pin AP0 to Pin AP5 can be configured to output S/PDIF digital audio
output, HBR, DSD, DST, or I2S.
A dual function pin that can be configured to output an audio serial clock or an Interrupt 2
signal.
Audio Output Pin. Pin AP0 to Pin AP5 can be configured to output S/PDIF digital audio
output, HBR, DSD, DST, or I2S. Additionally, Pin AP5 can be configured to provide LRCLK.
A dual function pin that can be configured to output an audio master clock or an Interrupt 2
signal.
Digital Core Supply Voltage (1.8 V).
I2C Port Serial Clock Input. SCL is the clock line for the control port.
I2C Port Serial Data Input/Output Pin. SDA is the data line for the control port.
Interrupt. This pin can be active low or active high. When status bits change, this pin is
triggered. The events that trigger an interrupt are under user configuration.
System Reset Input. Active low. A minimum low reset pulse width of 5 ms is required to
reset the ADV7612 circuitry.
Chip Select. This pin has an internal pull-down. Pulling this line up causes I2C state
machine to ignore I2C transmission.
PLL Supply Voltage (1.8 V).
Input Pin for 28.63636 MHz Crystal or an External 1.8 V, 28.63636 MHz Clock Oscillator
Source to Clock the ADV7612.
Crystal Input. Input pin for 28.63636 MHz crystal. This pin should be left unconnected if
XTALP is driven with 1.8 V clock signal.
Digital Core Supply Voltage (1.8 V).
Consumer Electronic Control Channel.
HDCP Slave Serial Clock Port B. DDCB_SCL is a 3.3 V input that is 5 V tolerant.
HDCP Slave Serial Data Port B. DDCB_SDA is a 3.3 V input that is 5 V tolerant.
5 V Detect Pin for Port B in the HDMI Interface.
Hot Plug assert signal output for HDMI Port B. This pin is 5 V tolerant.
HDCP Slave Serial Clock Port A. DDCA_SCL is a 3.3 V input that is 5 V tolerant.
HDCP Slave Serial Data Port A. DDCA_SDA is a 3.3 V input that is 5 V tolerant.
5 V Detect Pin for Port A in the HDMI Interface.
A dual function pin that can be configured to output Hot Plug assert signal (for HDMI
Port A) or an Interrupt 2 signal. This pin is 5 V tolerant.
Rev. E | Page 10 of 20
Data Sheet
ADV7612
POWER SUPPLY SEQUENCING
The recommended power-up sequence of the ADV7612 is to
power up the 3.3 V supplies first, followed by the 1.8 V supplies.
Reset should be held low while the supplies are powered up.
The ADV7612 supplies may be de-asserted simultaneously as
long as a higher rated supply does not go below a lower rated
supply.
Alternatively, the ADV7612 may be powered up by asserting all
supplies simultaneously. In this case, care must be taken while the
supplies are being established to ensure that a lower rated supply
does not go above a higher rated supply level.
3.3V
3.3V SUPPLIES
1.8V
1.8V SUPPLIES
3.3V SUPPLIES
POWER-UP
1.8V SUPPLIES
POWER-UP
Figure 7. Recommended Power-Up Sequence
Rev. E | Page 11 of 20
9308-007
POWER-DOWN SEQUENCE
POWER SUPPLY (V)
POWER-UP SEQUENCE
ADV7612
Data Sheet
FUNCTIONAL OVERVIEW
HDMI RECEIVER
The HDMI receiver supports all mandatory and many optional
3D formats, HDTV formats up to 1080p, and all display resolutions
up to UXGA (1600 × 1200 at 60 Hz).
With the inclusion of HDCP, displays can now receive encrypted
video content. The HDMI interface of the ADV7612 allows for
authentication of a video receiver, decryption of encoded data
at the receiver, and renewability of that authentication during
transmission, as specified by the HDCP 1.4 protocol.
The HDMI-compatible receiver on the ADV7612 allows programmable equalization of the HDMI data signals. This equalization
compensates for the high frequency losses inherent in HDMI and
DVI cabling, especially at longer lengths and higher frequencies.
It is capable of equalizing for cable lengths up to 30 meters to
achieve robust receiver performance.
The ADV7612 has a synchronization regeneration block used
to regenerate the DE based on the measurement of the video
format being displayed, and to filter the horizontal and vertical
synchronization signals to prevent glitches.
The HDMI receiver also supports TERC4 error detection, used for
detection of corrupted HDMI packets following a cable disconnect.
The HDMI receiver offers advanced audio functionality. The
receiver contains an audio mute controller that can detect a
variety of conditions, which may result in audible extraneous
noise in the audio output. On detection of these conditions, the
audio signal can be ramped to prevent audio clicks or pops.
Audio output can be formatted to one of the following modes:
•
•
•
•
LPCM and IEC 61937 S/PDIF
DSD audio
DST audio
HBR audio
Xpressview fast switching can be implemented with full HDCP
authentication available on the background port. Synchronization measurement and status information are available
for the background port.
HDMI receiver features include:
•
•
•
•
•
•
•
•
•
•
2:1 multiplexed HDMI receiver
3D format support
225 MHz HDMI receiver
Integrated equalizer for cable lengths up to 30 meters
HDCP 1.4 also on background ports
Internal HDCP keys
36-/30-bit Deep Color support
PCM, HBR, DST, and DSD audio packet support
Repeater support
Internal EDID RAM
•
•
Hot Plug assert output pin for each HDMI port
CEC controller
COMPONENT PROCESSOR
The ADV7612 has an any-to-any 3 × 3 CSC matrix. The CSC
block is placed at the back of the CP section. CSC enables
YPrPb-to-RGB and RGB-to-YCrCb conversions. Many other
standards of color space can be implemented using the color
space converter.
CP features include:
•
•
•
•
•
•
•
•
525i, 625i, 525p, 625p, 720p, 1080i, 1080p, and many other
HDTV formats are supported
Manual adjustments including gain (contrast) and
offset (brightness), hue, and saturation
Free run output mode that provides stable timing when no
video input is present
170 MHz conversion rate, which supports RGB input
resolutions up to 1600 × 1200 at 60 Hz
Contrast, brightness, hue, and saturation controls
Standard identification enabled by STDI block
RGB that can be color space converted to YCrCb and
decimated to a 4:2:2 format for video-centric back end IC
interfacing
DE output signal supplied for direct connection to
HDMI/DVI transmitter
OTHER FEATURES
The ADV7612 has HS, VS, FIELD, and DE output signals with
programmable position, polarity, and width.
The ADV7612 has two programmable interrupt request output
pins, including INT1 and INT2 (INT2 is accessible only via one
of following pins: MCLK/INT2, SCLK/INT2, or HPA_A/INT2).
It also features a low power-down mode. The I2C address of the
main map is 0x98 after reset. This can be changed after reset
to 0x9A if pullup is attached to VS/FIELD/ALSB pin and I2C
command SAMPLE_ALSB is issued. Refer to the Register
Access and Serial Ports Description section in the UG-216.
The ADV7612 is provided in a 14 mm × 14 mm, RoHS-compliant
LQFP_EP package, and is specified over the −40°C to +85°C
temperature range.
Rev. E | Page 12 of 20
Data Sheet
ADV7612
PIXEL INPUT/OUTPUT FORMATTING
The output section of the ADV7612 is highly flexible. The pixel
output bus can support up to 36-bit 4:4:4 YCrCb or 36-bit 4:4:4
RGB. The pixel data supports both single and double data rates
modes1. In SDR mode, a 16-/20-/24-bit 4:2:2 or 24-/30-/36-bit
4:4:4 output is possible. In DDR mode, the pixel output port can
be configured in an 8-/10-/12-bit 4:2:2 YCrCb or 12-bit 4:4:4 RGB.
PIXEL DATA OUTPUT MODES FEATURES
Bus rotation is supported. Table 5 to Table 8 outline the different
output formats that are supported. All output modes are controlled
via I2C.

1
DDR mode is only supported only up to 50 MHz (an equivalent to data rate
clocked 100 MHz clock in SDR mode).
The output pixel port features include the following:

8-/10-/12-bit ITU-R BT.656 4:2:2 YCrCb with embedded
time codes and/or HS, VS, and FIELD output signals
16-/20-/24-bit YCrCb with embedded time codes and/or
HS and VS/FIELD pin timing
24-/30-/36-bit YCrCb/RGB with embedded time codes
and/or HS and VS/FIELD pin timing
DDR 8-/10-/12-bit 4:2:2 YCrCb
DDR 12-/24-/30-/36 bit 4:4:4 RGB



Table 5. SDR 4:2:2 Output Modes
OP_FORMAT_SEL[7:0]
Pixel Output
P35
P34
P33
P32
P31
P30
P29
P28
P27
P26
P25
P24
P23
P22
P21
P20
P19
P18
P17
P16
P15
P14
P13
P12
P11
P10
P9
P8
P7
P6
P5
P4
P3
P2
P1
P0
1
0x01
8-Bit SDR
ITU-R BT.656
Mode 0
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
Y7, Cb7, Cr7
Y6, Cb6, Cr6
Y5, Cb5, Cr5
Y4, Cb4, Cr4
Y3, Cb3, Cr3
Y2, Cb2, Cr2
Y1, Cb1, Cr1
Y0, Cb0, Cr0
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
0x1
10-Bit SDR
ITU-R BT.656
Mode 0
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
Y9, Cb9, Cr9
Y8, Cb8, Cr8
Y7, Cb7, Cr7
Y6, Cb6, Cr6
Y5, Cb5, Cr5
Y4, Cb4, Cr4
Y3, Cb3, Cr3
Y2, Cb2, Cr2
Y1, Cb1, Cr1
Y0, Cb0, Cr0
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
SDR 4:2:2
0x2
12-Bit SDR
ITU-R BT.656
Mode 0
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
Y11, Cb11, Cr11
Y10, Cb10, Cr10
Y9, Cb9, Cr9
Y8, Cb8, Cr8
Y7, Cb7, Cr7
Y6, Cb6, Cr6
Y5, Cb5, Cr5
Y4, Cb4, Cr4
Y3, Cb3, Cr3
Y2, Cb2, Cr2
Y1, Cb1, Cr1
Y0, Cb0, Cr0
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
0x6
12-Bit SDR
ITU-R BT.656
Mode 1
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
Y1, Cb1, Cr1
Y0, Cb0, Cr0
High-Z
High-Z
High-Z
High-Z
Y11, Cb11, Cr11
Y10, Cb10, Cr10
Y9, Cb9, Cr9
Y8, Cb8, Cr8
Y7, Cb7, Cr7
Y6, Cb6, Cr6
Y5, Cb5, Cr5
Y4, Cb4, Cr4
Y3, Cb3, Cr3
Y2, Cb2, Cr2
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
Modes 0x00, 0x01, 0x02, 0x06 and 0x0A require additional writes to IO Map reg. 0x19[7:6]=2’b11 and IO Map reg.0x33[6]=1
Rev. E | Page 13 of 20
0x0A
12-Bit SDR
ITU-R BT.656
Mode 2
Y3, Cb3, Cr3
Y2, Cb2, Cr2
Y1, Cb1, Cr1
Y0, Cb0, Cr0
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
Y11, Cb11, Cr11
Y10, Cb10, Cr10
Y9, Cb9, Cr9
Y8, Cb8, Cr8
Y7, Cb7, Cr7
Y6, Cb6, Cr6
Y5, Cb5, Cr5
Y4, Cb4, Cr4
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
ADV7612
Data Sheet
Table 6. SDR 4:2:2 and 4:4:4 Output Modes
OP_FORMAT_SEL[7:0]
0x80
0x81
Pixel Output
P35
P34
P33
P32
P31
P30
P29
P28
P27
P26
P25
P24
P23
P22
P21
P20
P19
P18
P17
P16
P15
P14
P13
P12
P11
P10
P9
P8
P7
P6
P5
P4
P3
P2
P1
P0
16-Bit SDR
ITU-R BT.656
4:2:2 Mode 0
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
Y7
Y6
Y5
Y4
Y3
Y2
Y1
Y0
High-Z
High-Z
High-Z
High-Z
Cb7, Cr7
Cb6, Cr6
Cb5, Cr5
Cb4, Cr4
Cb3, Cr3
Cb2, Cr2
Cb1, Cr1
Cb0, Cr0
High-Z
High-Z
High-Z
High-Z
20-Bit
SDR ITU-R
BT.656 4:2:2
Mode 0
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
Y9
Y8
Y7
Y6
Y5
Y4
Y3
Y2
Y1
Y0
High-Z
High-Z
Cb9, Cr9
Cb8, Cr8
Cb7, Cr7
Cb6, Cr6
Cb5, Cr5
Cb4, Cr4
Cb3, Cr3
Cb2, Cr2
Cb1, Cr1
Cb0, Cr0
High-Z
High-Z
SDR 4:2:2
0x82
24-Bit SDR
ITU-R
BT.656
4:2:2
Mode 0
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
Y11
Y10
Y9
Y8
Y7
Y6
Y5
Y4
Y3
Y2
Y1
Y0
Cb11, Cr11
Cb10, Cr10
Cb9, Cr9
Cb8, Cr8
Cb7, Cr7
Cb6, Cr6
Cb5, Cr5
Cb4, Cr4
Cb3, Cr3
Cb2, Cr2
Cb1, Cr1
Cb0, Cr0
0x86
24-Bit SDR
ITU-R
BT.656
4:2:2
Mode 1
High-Z
High-Z
Cb1, Cr1
Cb0, Cr0
High-Z
High-Z
Y1
Y0
High-Z
High-Z
High-Z
High-Z
Y11
Y10
Y9
Y8
Y7
Y6
Y5
Y4
Y3
Y2
High-Z
High-Z
Cb11, Cr11
Cb10, Cr10
Cb9, Cr9
Cb8, Cr8
Cb7, Cr7
Cb6, Cr6
Cb5, Cr5
Cb4, Cr4
Cb3, Cr3
Cb2, Cr2
High-Z
High-Z
Rev. E | Page 14 of 20
0x8A
24-Bit SDR
ITU-R
BT.656
4:2:2
Mode 2
Y3
Y2
Y1
Y0
Cb3, Cr3
Cb2, Cr2
Cb1, Cr1
Cb0, Cr0
High-Z
High-Z
High-Z
High-Z
Y11
Y10
Y9
Y8
Y7
Y6
Y5
Y4
High-Z
High-Z
High-Z
High-Z
Cb11, Cr11
Cb10, Cr10
Cb9, Cr9
Cb8, Cr8
Cb7, Cr7
Cb6, Cr6
Cb5, Cr5
Cb4, Cr4
High-Z
High-Z
High-Z
High-Z
0x40
SDR 4:4:4
0x41
0x42
0x46
24-Bit
SDR
4:4:4
Mode 0
R7
R6
R5
R4
R3
R2
R1
R0
High-Z
High-Z
High-Z
High-Z
G7
G6
G5
G4
G3
G2
G1
G0
High-Z
High-Z
High-Z
High-Z
B7
B6
B5
B4
B3
B2
B1
B0
High-Z
High-Z
High-Z
High-Z
30-Bit
SDR
4:4:4
Mode 0
R9
R8
R7
R6
R5
R4
R3
R2
R1
R0
High-Z
High-Z
G9
G8
G7
G6
G5
G4
G3
G2
G1
G0
High-Z
High-Z
B9
B8
B7
B6
B5
B4
B3
B2
B1
B0
High-Z
High-Z
36-Bit
SDR
4:4:4
Mode 1
R9
R8
R7
R6
R5
R4
R3
R2
R1
R0
G7
G6
G5
G4
G3
G2
G1
G0
B11
B10
B9
B8
G11
G10
B7
B6
B5
B4
B3
B2
B1
B0
R11
R10
G9
G8
36-Bit
SDR
4:4:4
Mode 0
R11
R10
R9
R8
R7
R6
R5
R4
R3
R2
R1
R0
G11
G10
G9
G8
G7
G6
G5
G4
G3
G2
G1
G0
B11
B10
B9
B8
B7
B6
B5
B4
B3
B2
B1
B0
Data Sheet
ADV7612
Table 7. DDR 4:2:2 Output Modes
OP_FORMAT_SEL[7:0]
Pixel Output
P35
P34
P33
P32
P31
P30
P29
P28
P27
P26
P25
P24
P23
P22
P21
P20
P19
P18
P17
P16
P15
P14
P13
P12
P11
P10
P9
P8
P7
P6
P5
P4
P3
P2
P1
P0
0x20
8-Bit DDR ITU-656
(Clock/2 Output) 4:2:2 Mode 0
Clock Rise
Clock Fall
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
Y7
Cb7, Cr7
Y6
Cb6, Cr6
Y5
Cb5, Cr5
Y4
Cb4, Cr4
Y3
Cb3, Cr3
Y2
Cb2, Cr2
Y1
Cb1, Cr1
Y0
Cb0, Cr0
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
DDR 4:2:2 Mode (Clock/2)
0x21
10-Bit DDR ITU-656
(Clock/2 Output) 4:2:2 Mode 0
Clock Rise
Clock Fall
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
Y9
Cb9, Cr9
Y8
Cb8, Cr8
Y7
Cb7, Cr7
Y6
Cb6, Cr6
Y5
Cb5, Cr5
Y4
Cb4, Cr4
Y3
Cb3, Cr3
Y2
Cb2, Cr2
Y1
Cb1, Cr1
Y0
Cb0, Cr0
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
Rev. E | Page 15 of 20
0x22
12-Bit DDR ITU-656
(Clock/2 Output) 4:2:2 Mode 0
Clock Rise
Clock Fall
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
Y11
Cb11, Cr11
Y10
Cb10, Cr10
Y9
Cb9, Cr9
Y8
Cb8, Cr8
Y7
Cb7, Cr7
Y6
Cb6, Cr6
Y5
Cb5, Cr5
Y4
Cb4, Cr4
Y3
Cb3, Cr3
Y2
Cb2, Cr2
Y1
Cb1, Cr1
Y0
Cb0, Cr0
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
ADV7612
Data Sheet
Table 8. DDR 4:4:4 Output Modes
OP_FORMAT_SEL[7:0]
Pixel Output
P35
P34
P33
P32
P31
P30
P29
P28
P27
P26
P25
P24
P23
P22
P21
P20
P19
P18
P17
P16
P15
P14
P13
P12
P11
P10
P9
P8
P7
P6
P5
P4
P3
P2
P1
P0
1
2
0x60
24-Bit DDR RGB (Clock/2 Output)
Clock Rise
Clock Fall
R7-0
R7-1
R6-0
R6-1
R5-0
R5-1
R4-0
R4-1
R3-0
R3-1
R2-0
R2-1
R1-0
R1-1
R0-0
R0-1
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
G7-0
G7-1
G6-0
G6-1
G5-0
G5-1
G4-0
G4-1
G3-0
G3-1
G2-0
G2-1
G1-0
G1-1
G0-0
G0-1
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
B7-0
B7-1
B6-0
B6-1
B5-0
B5-1
B4-0
B4-1
B3-0
B3-1
B2-0
B2-1
B1-0
B1-1
B0-0
B0-1
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
DDR 4:4:4 Mode (Clock/2) 1, 2
0x61
30-Bit DDR RGB (Clock/2 Output)
Clock Rise
Clock Fall
R9-0
R9-1
R8-0
R8-1
R7-0
R7-1
R6-0
R6-1
R5-0
R5-1
R4-0
R4-1
R3-0
R3-1
R2-0
R2-1
R1-0
R1-1
R0-0
R0-1
High-Z
High-Z
High-Z
High-Z
G9-0
G9-1
G8-0
G8-1
G7-0
G7-1
G6-0
G6-1
G5-0
G5-1
G4-0
G4-1
G3-0
G3-1
G2-0
G2-1
G1-0
G1-1
G0-0
G0-1
High-Z
High-Z
High-Z
High-Z
B9-0
B9-1
B8-0
B8-1
B7-0
B7-1
B6-0
B6-1
B5-0
B5-1
B4-0
B4-1
B3-0
B3-1
B2-0
B2-1
B1-0
B1-1
B0-0
B0-1
High-Z
High-Z
High-Z
High-Z
-0 = even samples.
-1 = odd samples.
Rev. E | Page 16 of 20
0x62
36-Bit DDR RGB (Clock/2 Output)
Clock Rise
Clock Fall
R11-0
R11-1
R10-0
R10-1
R9-0
R9-1
R8-0
R8-1
R7-0
R7-1
R6-0
R6-1
R5-0
R5-1
R4-0
R4-1
R3-0
R3-1
R2-0
R2-1
R1-0
R1-1
R0-0
R0-1
G11-0
G11-1
G10-0
G10-1
G9-0
G9-1
G8-0
G8-1
G7-0
G7-1
G6-0
G6-1
G5-0
G5-1
G4-0
G4-1
G3-0
G3-1
G2-0
G2-1
G1-0
G1-1
G0-0
G0-1
B11-0
B11-1
B10-0
B10-1
B9-0
B9-1
B8-0
B8-1
B7-0
B7-1
B6-0
B6-1
B5-0
B5-1
B4-0
B4-1
B3-0
B3-1
B2-0
B2-1
B1-0
B1-1
B0-0
B0-1
Data Sheet
ADV7612
OUTLINE DIMENSIONS
0.75
0.60
0.45
1.00 REF
16.20
16.00 SQ
15.80
1.60
MAX
14.20
14.00 SQ
13.80
100
1
12.00 BSC
76
75
76
100
1
75
PIN 1
SEATING
PLANE
EXPOSED
PAD
BOTTOM VIEW
0.20
0.09
0.15
0.05
7°
0°
(PINS DOWN)
25
26
VIEW A
0.08
COPLANARITY
0.50
BSC
LEAD PITCH
51
50
(PINS UP)
51
0.27
0.22
0.17
FOR PROPER CONNECTION OF
THE EXPOSED PAD, REFER TO
THE PIN CONFIGURATION AND
FUNCTION DESCRIPTIONS
SECTION OF THIS DATA SHEET.
VIEW A
COMPLIANT TO JEDEC STANDARDS MS-026-BED-HD
ROTATED 90° CCW
25
26
50
06-22-2011-A
TOP VIEW
1.45
1.40
1.35
6.00 REF
SQ
Figure 8. 100-Lead Low Profile Quad Flat Package [LQFP_EP]
SW-100-2
Dimensions shown in millimeters
ORDERING GUIDE
Model 1, 2, 3
ADV7612BSWZ
ADV7612BSWZ-P
ADV7612WBSWZ
EVAL-ADV7612EB1Z
Temperature Range
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
EVAL-ADV7612EB2Z
EVAL-ADV7612-7511
EVAL-ADV7612-7511P
1
2
3
Package Description
100-Lead LQFP_EP
100-Lead LQFP_EP
100-Lead LQFP_EP
Evaluation board with HDCP keys
Package Option
SW-100-2
SW-100-2
SW-100-2
Evaluation board without HDCP keys
Low cost evaluation board with HDCP
Low cost evaluation board without HDCP
Z = RoHS Compliant Part.
The ADV7612BSWZ-P is a non-HDCP version.
W = Qualified for Automotive Applications.
AUTOMOTIVE PRODUCTS
The ADV7612WBSWZ model is available with controlled manufacturing to support the quality and reliability requirements of
automotive applications. Note that this automotive model may have specifications that differ from the commercial models; therefore,
designers should review the Specifications section of this data sheet carefully. Only the automotive grade product shown is available for
use in automotive applications. Contact your local Analog Devices account representative for specific product ordering information and
to obtain the specific Automotive Reliability reports for this model.
Rev. E | Page 17 of 20
ADV7612
Data Sheet
NOTES
Rev. E | Page 18 of 20
Data Sheet
ADV7612
NOTES
Rev. E | Page 19 of 20
ADV7612
Data Sheet
NOTES
I2C refers to a communications protocol originally developed by Philips Semiconductors (now NXP Semiconductors).
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other
countries.
©2010–2014 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D09308-0-1/14(E)
Rev. E | Page 20 of 20
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Analog Devices Inc.:
EVAL-AVB-LISTENER EVAL-ADV7612-7511P EVAL-ADV7612EB2Z EVAL-ADV7612EB1Z ADV7612BSWZ EVALADV7612-7511 ADV7612BSWZ-P ADV7612WBSWZ
Download PDF
Similar pages