Cube Testing
www.humboldtmfg.com • 1.800.544.7220
ASTM-Compliant Mixer, 5-Qt. (4.73L)— H-3841
ASTM-compliant mixer for mixing hydraulic cement pastes and mortars
of plastic consistency. Mixer includes H-3844 Bowl Positioning Adapter,
a 5-qt. (4.73L) stainless steel bowl and 1 flat, stainless steel beater for
mixing heavy materials. Hobart Model No. N-50 operates on principle
of planetary action—beater reaches every part of the batch, rotating on
its axis in opposite directions as it moves around the bowl. Thoroughly
blends, mixes and aerates all ingredients for consistent, predictable finished batches. Selective agitator transmission has 3 speed settings:
139, 285 and 591 RPM. Base dimensions: 10-3/8 x 15" (264 x 381mm).
Height: 17" (432mm). Features U/L listed cord and plug. Meets ASTM C227, C305; AASHTO T162.
Cement
H-3841
Mixer, 5-Qt. (4.73L), 230V 60Hz— H-3841.2F
Mixer, 5-Qt. (4.73L), 230V 50Hz— H-3841.5F
Identical to H-3841 mixer above, except that the electrical configurations
cause the mixer to run at a slightly slower speed, which renders them
non-ASTM compliant.
Mixer Components
Part #
Bowl Positioning Adapter
H-3844
Bowl Lid, acrylic
H-3846L
Beater—Stainless Steel, Flat-type
H-3846.1
Bowl—Stainless Steel, 5 qt. (4.73L)
H-3841.2
Wire Loop Whip—Stainless Steel
H-3841WW
Wire Loop Whip—Stainless Steel, 1/4" dia. wire
H-3841HW
H-3844
H-3841.1
H-3841.2
Tamper, Rubber Compound— H-2860
Rubber compound tamper is 6" (152mm) long with 1/2 x 1" (13 x 25mm) cross section.
Tamper, Wood— H-2860W
Wood tamper is 6" (152mm) long with 1/2 x 1" (13 x 25mm) cross section. H-2860W meets ASTM C87, C109, C157, C185, C596; AASHTO T106, T137, T160.
H-3841WW
Tapping Stick— H-3855
Maple wood with 5/8" (16mm) dia. and 6" (152mm) length. Meets
ASTM C185; AASHTO T137.
H-2860
Rubbing Block— H-2812
Ground steel block 3" dia. x 1" (76 x 25mm) for removing lose sand
grains and encrustations from concrete specimen surfaces before
compressive testing.
Digital Caliper (0-200mm)— H-2816.8
Provides accurate outside, inside, depth and step measurements and features large, easy-to-read LCD digits, rolling thumb wheel; plus control buttons for zero, on/off and inch/mm functions.
H-2812
H-2860W
H-3855
Stainless Steel Dial Caliper 6" (150mm)— H-2817M
Easy to read black face dial caliper with combination inch and metric
scales features 0.001" / 0.1mm graduations, hardened and ground
stainless steel main beam with hardened, ground and lapped measuring faces.
H-2817
Stainless Steel Dial Caliper (6 inch)— H-2817
Similar to above, features a 6" measuring range with .001" graduations and .100" per revolution.
H-2816.8
See all Caliper offerings on page 251
121
Download PDF
Similar pages