Motherboard
ROG STRIX
X370-I GAMING
E13660
Second Edition V2
November 2017
Copyright © 2017 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless
such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identification or explanation and to the
owners’ benefit, without intent to infringe.
Offer to Provide Source Code of Certain Software
This product contains copyrighted software that is licensed under the General Public License (“GPL”),
under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software
Licenses. Such software in this product is distributed without any warranty to the extent permitted by the
applicable law. Copies of these licenses are included in this product.
Where the applicable license entitles you to the source code of such software and/or other additional data,
you may obtain it for a period of three years after our last shipment of the product, either
(1) for free by downloading it from https://www.asus.com/support/
or
(2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location
where you want to have it shipped to, by sending a request to:
ASUSTeK Computer Inc.
Legal Compliance Dept.
15 Li Te Rd.,
Beitou, Taipei 112
Taiwan
In your request please provide the name, model number and version, as stated in the About Box of the
product for which you wish to obtain the corresponding source code and your contact details so that we
can coordinate the terms and cost of shipment with you.
The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as
the corresponding binary/object code.
This offer is valid to anyone in receipt of this information.
ASUSTeK is eager to duly provide complete source code as required under various Free Open Source
Software licenses. If however you encounter any problems in obtaining the full corresponding source
code we would be much obliged if you give us a notification to the email address gpl@asus.com, stating
the product and describing the problem (please DO NOT send large attachments such as source code
archives, etc. to this email address).
ii
Contents
Safety information........................................................................................................ v
About this guide.......................................................................................................... vi
ROG STRIX X370-I GAMING specifications summary........................................... viii
Package contents........................................................................................................ xi
Installation tools and components........................................................................... xii
Chapter 1:
1.1
Product Introduction
Motherboard overview................................................................................ 1-1
1.1.1
Before you proceed...................................................................... 1-1
1.1.2
Motherboard layout...................................................................... 1-2
1.1.3
Central Processing Unit (CPU).................................................... 1-4
1.1.4
System memory........................................................................... 1-4
1.1.5
Expansion slots............................................................................ 1-6
1.1.6
Onboard LEDs............................................................................. 1-6
1.1.7Headers....................................................................................... 1-8
1.1.8
Chapter 2:
2.1
2.2
Internal connectors...................................................................... 1-9
Basic Installation
Building your PC system........................................................................... 2-1
2.1.1
Motherboard installation............................................................... 2-1
2.1.2
CPU installation........................................................................... 2-3
2.1.3
Cooling system installation.......................................................... 2-4
2.1.4
DIMM installation......................................................................... 2-7
2.1.5
ATX power connection................................................................. 2-8
2.1.6
SATA device connection.............................................................. 2-8
2.1.7
Front I/O connector...................................................................... 2-9
2.1.8
Expansion card installation.......................................................... 2-9
2.1.9
M.2 installation........................................................................... 2-10
2.1.10
Wi-Fi antenna installation........................................................... 2-12
Motherboard rear and audio connections.............................................. 2-13
2.2.1
Rear I/O connection................................................................... 2-13
2.2.2
Audio I/O connections................................................................ 2-14
2.3
Starting up for the first time..................................................................... 2-16
2.4
Turning off the computer......................................................................... 2-16
Chapter 3:
3.1
3.2
BIOS Setup
Knowing BIOS............................................................................................. 3-1
BIOS setup program................................................................................... 3-2
3.2.1
Advanced Mode........................................................................... 3-3
iii
3.2.2
EZ Mode...................................................................................... 3-6
3.2.3
Q-Fan Control.............................................................................. 3-7
3.2.4
EZ Tuning Wizard........................................................................ 3-9
3.3
My Favorites.............................................................................................. 3-10
3.4
Main menu................................................................................................. 3-12
3.5
Ai Tweaker menu...................................................................................... 3-12
3.6
Advanced menu........................................................................................ 3-13
3.6.1
AMD fTPM Configuration........................................................... 3-13
3.6.2
CPU Configuration..................................................................... 3-13
3.6.3
SATA Configuration................................................................... 3-14
3.6.4
Onboard Devices Configuration................................................. 3-14
3.6.5
APM Configuration..................................................................... 3-15
3.6.6
Network Stack Configuration..................................................... 3-16
3.6.7
HDD/SSD SMART Information.................................................. 3-16
3.6.8
USB Configuration..................................................................... 3-16
3.7
Monitor menu............................................................................................ 3-17
3.8
Boot menu................................................................................................. 3-17
3.9
Tool menu.................................................................................................. 3-19
3.9.1
ASUS EZ Flash 3 Utility............................................................. 3-19
3.9.2
Secure Erase............................................................................. 3-19
3.9.3
ASUS Overclocking Profile........................................................ 3-20
3.9.4
ASUS SPD Information.............................................................. 3-20
3.9.5
Graphics Card Information......................................................... 3-20
3.10
Exit menu................................................................................................... 3-21
3.11
Updating BIOS........................................................................................... 3-21
3.11.1
EZ Update.................................................................................. 3-21
3.11.2
ASUS EZ Flash 3....................................................................... 3-22
3.11.3
ASUS CrashFree BIOS 3........................................................... 3-24
Chapter 4:
4.1
4.2
RAID Support
RAID configurations................................................................................... 4-1
4.1.1
RAID definitions........................................................................... 4-1
4.1.2
Installing Serial ATA hard disks................................................... 4-2
Creating a RAID driver disk....................................................................... 4-2
4.2.1
Creating a RAID driver disk in Windows® .................................... 4-2
Appendix
Notices..................................................................................................................... A-1
ASUS contact information....................................................................................... A-7
iv
Safety information
Electrical safety
•
To prevent electrical shock hazard, disconnect the power cable from the electrical outlet
before relocating the system.
•
When adding or removing devices to or from the system, ensure that the power cables
for the devices are unplugged before the signal cables are connected. If possible,
disconnect all power cables from the existing system before you add a device.
•
Before connecting or removing signal cables from the motherboard, ensure that all
power cables are unplugged.
•
Seek professional assistance before using an adapter or extension cord. These devices
could interrupt the grounding circuit.
•
Ensure that your power supply is set to the correct voltage in your area. If you are not
sure about the voltage of the electrical outlet you are using, contact your local power
company.
•
If the power supply is broken, do not try to fix it by yourself. Contact a qualified service
technician or your retailer.
Operation safety
•
Before installing the motherboard and adding devices on it, carefully read all the manuals
that came with the package.
•
Before using the product, ensure all cables are correctly connected and the power
cables are not damaged. If you detect any damage, contact your dealer immediately.
•
To avoid short circuits, keep paper clips, screws, and staples away from connectors,
slots, sockets and circuitry.
•
Avoid dust, humidity, and temperature extremes. Do not place the product in any area
where it may become wet.
•
Place the product on a stable surface.
•
If you encounter technical problems with the product, contact a qualified service
technician or your retailer.
v
About this guide
This user guide contains the information you need when installing and configuring the
motherboard.
How this guide is organized
This guide contains the following parts:
•
Chapter 1: Product Introduction
This chapter describes the features of the motherboard and the new technology it
supports. It includes description of the switches, jumpers, and connectors on the
motherboard.
•
Chapter 2: Basic Installation
This chapter lists the hardware setup procedures that you have to perform when
installing system components.
•
Chapter 3: BIOS Setup
This chapter tells how to change system settings through the BIOS Setup menus.
Detailed descriptions of the BIOS parameters are also provided.
•
Chapter 4: RAID Support
This chapter describes the RAID configurations.
Where to find more information
Refer to the following sources for additional information and for product and software
updates.
1.
ASUS website
The ASUS website (www.asus.com) provides updated information on ASUS hardware
and software products.
2.
Optional documentation
Your product package may include optional documentation, such as warranty flyers,
that may have been added by your dealer. These documents are not part of the
standard package.
vi
Conventions used in this guide
To ensure that you perform certain tasks properly, take note of the following symbols used
throughout this manual.
DANGER/WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when trying to
complete a task.
IMPORTANT: Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.
Typography
Bold text
Indicates a menu or an item to select.
Italics
Used to emphasize a word or a phrase.
<Key>
Keys enclosed in the less-than and greater-than sign
means that you must press the enclosed key.
Example: <Enter> means that you must press the Enter or
Return key.
<Key1> + <Key2> + <Key3>
If you must press two or more keys simultaneously, the key
names are linked with a plus sign (+).
vii
ROG STRIX X370-I GAMING specifications summary
AMD AM4 socket for AMD Ryzen™ / 7th Generation A-series / Athlon™ Processors
CPU
Supports AMD AM4 Socket 14nm CPU
* Refer to www.asus.com for CPU support list.
Chipset
AMD X370
AMD Ryzen™ Processors
Memory
-2xD
IMM, max. 32GB, DDR4 3600(O.C.) / 3400(O.C.) / 3333(O.C.)/ 3200(O.C.)
/ 3000(O.C.) / 2800(O.C.) / 2666 / 2400 / 2133 MHz, ECC and non-ECC, unbuffered memory*
AMD 7th Gen A-series / Athlon™ Processors
-2xD
IMM, max. 32GB, DDR4 2400 / 2133 MHz, non-ECC, un-buffered memory*
Dual channel memory architecture
* Please refer to Memory QVL (Qualified Vendors List) for details.
AMD Ryzen™ Processors
Expansion slots
- 1 x PCIe 3.0 x16 (supports x16)
AMD 7th Gen A-series / Athlon™ Processors
- 1 x PCIe 3.0 x16 (supports x8)
AMD Ryzen™ Processors
-1xM
.2_1 Socket 3 with M Key, type 2242/2260/2280 (PCIE 3.0 x4 and SATA
modes) storage devices support
AMD 7th Generation A-series / Athlon™ Processors
Storage
-1xM
.2_1 Socket 3 with M Key, type 2242/2260/2280 (SATA mode) storage
devices support
AMD X370 chipset
-1xM
.2_2 Socket 3 with M Key, type 2242/2260/2280 (PCIE 2.0 x4) storage
devices support
- 4 x SATA 6Gb/s ports*
* Support RAID 0,1,10
Wireless &
Bluetooth
Wi-Fi 802.11 a/b/g/n/ac supports dual frequency band 2.4/5 GHz with MU-MIMO
support
Bluetooth v4.2, 4.0LE, 3.0+HS
Intel® Ethernet Controller I211-AT
LAN
Anti-surge LANGuard
ROG GameFirst IV
SupremeFX S1220A 8-Channel High Definition Audio CODEC
- Supports up to 32-Bit/192kHz playback*
- Impedance sense for front and rear headphone outputs
- High quality 120 dB SNR stereo playback output and 113 dB SNR recording input
- Dual OP Amplifiers
Audio
- LED-illuminated audio jacks
- Jack-detection, Multi-streaming, and Front Panel Jack-retasking
Audio Feature
- Sonic Studio III + Sonic Studio Link
- Sonic Radar III
* Due to limitations in HDA bandwidth, 32-Bit/192kHz is not supported for 8-Channel
audio.
(continued on the next page)
viii
ROG STRIX X370-I GAMING specifications summary
AMD Ryzen™ / 7th Generation A-series / Athlon™ Processors
- 4 x USB 3.1 Gen 1 ports (4 ports at back panel [blue])
USB
AMD X370 chipset
- 2 x USB 3.1 Gen 2 ports (2 ports at back panel [red], Type-A)
- 2 x USB 3.1 Gen 1 ports (2 ports at mid-board)
- 2 x USB 2.0 ports (2 ports at mid-board)
ROG Exclusive Features
ROG RAMCache II
ROG GameFirst IV
ROG Overwolf
ROG CPU-Z
ROG CloneDrive
Special Features
Performance Optimization
5-Way Optimization
- Whole system optimization with a single click! Perfectly
consolidates better CPU performance, power saving, digital
power control, system cooling and app usages.
Digi+VRM
EPU
- EPU
TPU
- Auto Tuning, TurboV
Fan Xpert 4
- featuring Fan Auto Tuning function and multiple thermistors
selection for optimized system cooling control
Turbo APP
- featuring system performance tuning for selected applications
ASUS EZ DIY
- ASUS CrashFree BIOS 3
- ASUS EZ Flash 3
ASUS Q-Design
- Q-Shield
- Q-LED (CPU, DRAM, VGA, Boot Device LED)
- Q-Slot
- Q-DIMM
Gamer’s Guardian
- SafeSlot
- DIGI+ VRM
- DRAM Overcurrent Protection
- ESD Guards on LAN, Audio and USB 3.1 Gen 2 / USB 3.1 Gen 1/
USB 2.0 ports
- Highly Durable Components
- Stainless Steel Back I/O
ASUS Exclusive Features
- AURA Lighting Control
- AI Suite 3
- AI Charger
(continued on the next page)
ix
ROG STRIX X370-I GAMING specifications summary
2 x USB 3.1 Gen 2 ports (2 x Type-A [red])
4 x USB 3.1 Gen 1 ports [blue]
Back I/O Ports
1 x Anti-surge LAN (RJ-45) port
1 x ASUS Wi-Fi module (Wi-Fi 802.11 a/b/g/n/ac and Bluetooth v4.2)
3 x LED-illuminated audio jacks*
* Use a chassis with HD audio module in the front panel to support an
8-channel audio output.
1 x USB 3.1 Gen 1 connector supports additional 2 USB 3.1 Gen
1 ports
1 x USB 2.0 connector supports additional 2 USB 2.0 ports
4 x SATA 6Gb/s connectors
1 x M.2_1 Socket 3 for M Key, type 2242/2260/2280 storage devices
support
1 x M.2_2 Socket 3 for M Key, type 2242/2260/2280 storage devices
support
1 x 4-pin CPU fan connector
1 x 4-pin AIO_PUMP fan connector
Internal I/O Ports
1 x 4-pin Chassis fan connector
1 x Thermal sensor connector
1 x RGB header
1 x Addressable RGB header
1 x 24-pin EATX power connector
1 x 8-pin EATX 12V power connector
1 x System panel connector
1 x Front panel audio connector (AAFP)
1 x Speaker header
1 x Clear CMOS jumper (2-pin)
BIOS
128 Mb Flash ROM, UEFI AMI BIOS, PnP, WfM2.0, SM BIOS 3.0,
ACPI 6.1, Multi-language BIOS, ASUS EZ Flash 3, CrashFree
BIOS 3, F11 EZ Tuning Wizard, F6 Q-fan Control, F3 My Favorites,
Last Modified log, F12 PrintScreen and ASUS DRAM SPD (Serial
Presence Detect) memory information
Manageability
WfM 2.0, WOL by PME, PXE
Drivers
Support DVD contents
Anti-virus software
ASUS Utilities
Operating System
Support
Windows® 10 64-bit
Form Factor
Mini ITX Form Factor, 6.7”x 6.7” (17.0 cm x 17.0 cm)
Specifications are subject to change without notice.
x
Package contents
Check your motherboard package for the following items.
Motherboard
ROG STRIX X370-I GAMING
4 x SATA 6 Gb/s cables
Cables
1 x Addressable LED extension cable
1 x Panel cable
1 x ASUS 2T2R dual band Wi-Fi moving antennas (Wi-Fi
802.11a/b/g/n/ac compliant)
1 x I/O Shield
Accessories
1 x ROG Strix sticker
1 x M.2 mounting kit
2 x M.2 Screw Packages
1 x Cable Tie Package
Application DVD
ROG motherboard support DVD
Documentation
User guide
If any of the above items is damaged or missing, contact your retailer.
xi
Installation tools and components
1 Bag of screws
Phillips (cross) screwdriver
PC chassis
Power supply unit
AMD AM4 CPU
AMD AM4 compatible CPU Fan
DDR4 DIMM
SATA hard disk drive
SATA optical disc drive (optional)
Graphics card (optional)
The tools and components in the table above are not included in the motherboard package.
xii
Product Introduction
Product Introduction
1.1
Motherboard overview
1.1.1
Before you proceed
1
Chapter 1
Chapter 1:
Take note of the following precautions before you install motherboard components or change
any motherboard settings.
•
Unplug the power cord from the wall socket before touching any component.
•
Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due
to static electricity.
•
Hold components by the edges to avoid touching the ICs on them.
•
Whenever you uninstall any component, place it on a grounded antistatic pad or in the
bag that came with the component.
•
Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so
may cause severe damage to the motherboard, peripherals, or components.
ROG STRIX X370-I GAMING
1-1
1.1.2
Motherboard layout
1
2
3
4
5
6
7
Chapter 1
17.0cm(6.7in)
CPU_FAN
BOOT
VGA
DRAM
CPU
ADD_HEADER RGB_HEADER
AIO_PUMP CHA_FAN
AMD
X370
128Mb
BIOS
AAFP
ALED1
ALED2
2280
MIC_IN
Super
I/O
2242
TPU
ALC
1220A 2260
PCH_LED1
PCH_LED4
PCH_LED2
PCH_LED3
SATA
X4
V
CON_LED
LINE_IN
LINE_OUT
PCIE
SATA6G_1
SATA6G_2
ALED3
F_PANEL
SB_PWR
PCIEX16
16
19
17.0cm(6.7in)
SATA6G_4 SATA6G_3 SPEAKER
M.2(WIFI)
17
AURA
USB12
M.2_1(SOCKET3)
BATT_CON
U31G1_12
LAN_U31G2_12
DDR4 DIMM_B1 (64bit, 288-pin module)
18
T_SENSOR
U31G1_56
CLRTC
SOCKET AM4
U31G1_34
DDR4 DIMM_A1 (64bit, 288-pin module)
DIGI
+EPU
EATXPWR
EATX12V
1
8
9
10
11
12
13
14
10 15
16
RGBLED
PCIE SATA
X4
1-2
X
Chapter 1: Product Introduction
Refer to 1.1.8 Internal connectors and 2.2.1 Rear I/O connection for more information
about rear panel connectors and internal connectors.
Connectors/Jumpers/Buttons and switches/Slots
1. ATX power connectors (24-pin EATXPWR; 8-pin EATX12V)
2. CPU and chassis fan connectors; AIO pump connector (4-pin CPU_FAN;
4-pin CHA_FAN; 4-pin AIO_PUMP)
3. Addressable RGB header (4-1 pin ADD_HEADER)
4. RGB header (4-pin RGB_HEADER)
5. AMD AM4 CPU socket
6. DDR4 DIMM slots
7. Q-LEDs (BOOT, VGA, DRAM, CPU)
8. Speaker connector (4-pin SPEAKER)
9. System panel connector (10-1 pin F_PANEL)
10. AMD Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1-4)
11. Thermal sensor connector (2-pin T_SENSOR)
12. USB 2.0 connector (10-1 pin USB12)
13. USB 3.1 Gen 1 connector (20-1 pin U31G1_12)
14. Standby power LED (SB_PWR)
15. Clear RTC RAM jumper (2-pin CLRTC)
16. M.2 Socket 3
17. Front panel audio connector (10-1 pin AAFP)
18. RTC Battery header (2-pin BATT_CON)
19. RGB LED
ROG STRIX X370-I GAMING
Chapter 1
Layout contents
Page
1-9
1-14
1-12
1-15
1-4
1-4
1-7
1-13
1-13
1-10
1-12
1-10
1-11
1-6
1-8
1-14
1-11
1-9
1-7
1-3
1.1.3
Central Processing Unit (CPU)
The motherboard comes with an AM4 socket designed for AMD Ryzen™ / 7th Generation
A-series / Athlon™ processors up to 8-core.
Chapter 1
ROG STRIX X370-I GAMING CPU socket AM4
The AM4 socket has a different pinout design. Ensure that you use a CPU designed for the
AM4 socket. The CPU fits in only one correct orientation. DO NOT force the CPU into the
socket to prevent bending the connectors on the socket and damaging the CPU!
Ensure that all power cables are unplugged before installing the CPU.
1.1.4
System memory
The motherboard comes with two Double Data Rate 4 (DDR4) Dual Inline Memory Modules
(DIMM) slots.
DIMM_A1
DIMM_B1
A DDR4 module is notched differently from a DDR, DDR2, or DDR3 module. DO NOT
install a DDR, DDR2, or DDR3 memory module to the DDR4 slot.
ROG STRIX X370-I GAMING
288-pin DDR4 DIMM sockets
1-4
Chapter 1: Product Introduction
Chapter 1
Recommended memory configurations
Memory configurations
You may install 2 GB, 4 GB, 8 GB, and 16 GB DDR4 DIMMs into the DIMM sockets.
•
AMD Ryzen™ processors support ECC and non-ECC un-buffered memory.
•
AMD 7th Gen A-series / Athlon™ processors support non-ECC un-buffered memory.
•
You may install varying memory sizes in Channel A and Channel B. The system
maps the total size of the lower-sized channel for the dual-channel configuration. Any
excess memory from the higher-sized channel is then mapped for single-channel
operation.
•
This motherboard does not support DIMMs made up of 512 Mb (64 MB) chips or less
(Memory chip capacity counts in Megabit, 8 Megabit/Mb = 1 Megabyte/MB).
•
The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value.
•
For system stability, use a more efficient memory cooling system to support a full
memory load (2 DIMMs) or overclocking condition.
•
Always install the DIMMS with the same CAS Latency. For an optimum compatibility,
we recommend that you install memory modules of the same version or data code
(D/C) from the same vendor. Check with the vendor to get the correct memory
modules.
•
Visit the ASUS website for the latest QVL.
ROG STRIX X370-I GAMING
1-5
1.1.5
Expansion slots
Chapter 1
Unplug the power cord before adding or removing expansion cards. Failure to do so may
cause you physical injury and damage motherboard components.
1
Slot No.
1
PCIe 3.0 x16 slot
1.1.6
1.
Slot Description
Onboard LEDs
Standby Power LED (SB_PWR)
The motherboard comes with a standby power LED. The LED lights up to indicate that
the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should
shut down the system and unplug the power cable before removing or plugging in any
motherboard component. The illustration below shows the location of the onboard LED.
SB_PWR
ON
Standby Power
OFF
Powered Off
ROG STRIX X370-I GAMING Standby power LED
1-6
Chapter 1: Product Introduction
2.
Q-LEDs (BOOT, VGA, DRAM, CPU)
Chapter 1
Q-LEDs check key components (CPU, DRAM, VGA card, and booting devices) in
sequence during motherboard booting process. If an error is found, the corresponding
LED remains lit until the problem is solved. This user-friendly design provides an
intuitive way to locate the root problem within seconds.
BOOT_DEVICE_LED
VGA_LED
DRAM_LED
CPU_LED
ROG STRIX X370-I GAMING CPU/DRAM/
BOOT_DEVICE/VGA LED
The order which the LEDs light up may vary per CPU.
The Q-LEDs provide the most probable cause of an error code as a starting point for
troubleshooting. The actual cause may vary from case to case.
3.
RGB LED
The RGB LED lighting control provides several lighting schemes, which allow you
to customize your favorite LED effect. You can set your favorite LED effect to cast
a stunning multi-color glow across your build, change shades to indicate CPU
temperature, pulsate in time to the beat of your music, or set your favorite color for
each pair of LEDs.
RGB1
RGB2
RGB3
RGB4
RGB5
RGB6
RGB7
RGB LED(Bottom)
RGB8
RGB9
RGB10
RGB11
RGB12
ROG STRIX X370-I GAMING RGB LED Lighting
ROG STRIX X370-I GAMING
1-7
1.1.7Headers
1.
Clear RTC RAM jumper (2-pin CLRTC)
Chapter 1
This jumper allows you to clear the CMOS RTC RAM data of the system setup
information such as date, time, and system passwords.
CLRTC
GND
+3V_BAT
PIN 1
ROG STRIX X370-I GAMING Clear RTC RAM
To erase the RTC RAM:
1.
Turn OFF the computer and unplug the power cord.
2.
Use a metal object such as a screwdriver to short the two pins.
3.
Plug the power cord and turn ON the computer.
4.
Hold down the <Del> key during the boot process and enter BIOS setup to re-enter
data.
Except when clearing the RTC RAM, never place a metal object or jumper cap on the
CLRTC jumper. Placing a metal object or jumper cap will cause system boot failure!
1-8
•
If the steps above do not help, remove the onboard battery and place a metal object
or jumper cap again to clear the CMOS RTC RAM data. After the CMOS clearance,
reinstall the battery.
•
You do not need to clear the RTC when the system hangs due to overclocking. For
system failure due to overclocking, use the C.P.R. (CPU Parameter Recall) feature.
Shut down and reboot the system so the BIOS can automatically reset parameter
settings to default values.
•
Due to the chipset behavior, AC power off is required to enable C.P.R. function. You
must turn off and turn on the power supply or unplug and plug the power cord before
rebooting the system.
Chapter 1: Product Introduction
2.
RTC Battery header (2-pin BATT_CON)
Chapter 1
This header is for the lithium CMOS battery.
BATT_CON
VBAT
GND
PIN 1
ROG STRIX X370-I GAMING Battery header
1.1.8
1.
Internal connectors
ATX power connectors (24-pin EATXPWR; 8-pin EATX12V)
These connectors are for ATX power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation and
push down firmly until the connectors completely fit.
B
A
B
EATX12V
EATXPWR
+12V DC
+12V DC
+12V DC
+12V DC
A
GND
GND
GND
GND
PIN 1
+3 Volts
+12 Volts
+12 Volts
+5V Standby
Power OK
GND
+5 Volts
GND
+5 Volts
GND
+3 Volts
+3 Volts
GND
+5 Volts
+5 Volts
+5 Volts
-5 Volts
GND
GND
GND
PSON#
GND
-12 Volts
+3 Volts
PIN 1
ROG STRIX X370-I GAMING ATX power connectors
•
For a fully configured system, we recommend that you use a power supply unit
(PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a
minimum power of 350 W.
•
Do not forget to connect the 8-pin EATX12 V power plug. Otherwise, the system will
not boot.
•
We recommend that you use a PSU with a higher power output when configuring a
system with more power-consuming devices. The system may become unstable or
may not boot up if the power is inadequate.
ROG STRIX X370-I GAMING
1-9
2.
AMD Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1-4)
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
Chapter 1
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, and 10
configuration through the onboard AMD X370 chipset.
A
B
SATA6G_3
SATA6G_1
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXN1
RSATA_RXP1
GND
GND
RSATA_TXP3
RSATA_TXN3
GND
RSATA_RXN3
RSATA_RXP3
GND
A
B
SATA6G_2
GND
RSATA_RXP2
RSATA_RXN2
GND
RSATA_TXN2
RSATA_TXP2
GND
SATA6G_4
GND
RSATA_TXP4
RSATA_TXN4
GND
RSATA_RXN4
RSATA_RXP4
GND
ROG STRIX X370-I GAMING
SATA 6.0Gb/s connectors
3.
•
These connectors are set to [AHCI] by default. If you intend to create a Serial ATA
RAID set using these connectors, set the SATA Mode Selection item in the BIOS to
[RAID].
•
Before creating a RAID set, refer to section RAID configurations or the manual
bundled in the motherboard support DVD.
•
When using NCQ, set the SATA Mode in the BIOS to [AHCI]. Refer to section SATA
Configuration for details.
USB 2.0 connector (10-1 pin USB12)
This connector is for a USB 2.0 port. Connect the USB module cable to this connector,
then install the module to a slot opening at the back of the system chassis. This USB
connector complies with USB 2.0 specification that supports up to 480 Mb/s connection
speed.
USB12
NC
GND
USB_P2+
USB_P2USB+5V
GND
USB_P1+
USB_P1USB+5V
PIN 1
ROG STRIX X370-I GAMING USB2.0 connector
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
1-10
Chapter 1: Product Introduction
4.
USB 3.1 Gen 1 connector (20-1 pin U31G1_12)
Chapter 1
This connector allows you to connect a USB 3.1 Gen 1 module for additional USB
3.1 Gen 1 front or rear panel ports. With an installed USB 3.1 Gen 1 module, you can
enjoy all the benefits of USB 3.1 Gen 1 including faster data transfer speeds of up to
5 Gb/s, faster charging time for USB-chargeable devices, optimized power efficiency,
and backward compatibility with USB 2.0.
U31G1_12
PIN 1
USB3+5V
IntA_P2_SSRXIntA_P2_SSRX+
GND
IntA_P2_SSTXIntA_P2_SSTX+
GND
IntA_P2_DIntA_P2_D+
USB3+5V
IntA_P1_SSRXIntA_P1_SSRX+
GND
IntA_P1_SSTXIntA_P1_SSTX+
GND
IntA_P1_DIntA_P1_D+
GND
ROG STRIX X370-I GAMING USB3.1 Gen1 connector
The USB 3.1 Gen 1 module is purchased separately.
The plugged USB 3.1 Gen 1 device may run on xHCI or EHCI mode depending on the
operating system’s setting.
5.
Front panel audio connector (10-1 pin AAFP)
SENSE2_RETUR
AGND
NC
SENSE1_RETUR
This connector is for a chassis-mounted front panel audio I/O module that supports HD
Audio. Connect one end of the front panel audio I/O module cable to this connector.
AAFP
PORT1 L
PORT1 R
PORT2 R
SENSE_SEND
PORT2 L
PIN 1
HD-audio-compliant
pin definition
ROG STRIX X370-I GAMING Front panel connector
We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard’s high-definition audio capability.
ROG STRIX X370-I GAMING
1-11
6.
Addressable RGB header (4-1 pin ADD_HEADER)
This connector is for individually addressable RGB WS2812B LED strips with
embedded WS2811LED driver ICs.
Chapter 1
ADD_HEADER
Ground
+5V
Data
PIN 1
ROG STRIX X370-I GAMING ADD header
The addressable RGB header supports WS2812B addressable RGB LED strips (5V/Data/
Ground), with a maximum power rating of 3A (5V) and a maximum of 60 LEDs.
Before you install or remove any component, ensure that the ATX power supply is switched
off or the power cord is detached from the power supply. Failure to do so may cause severe
damage to the motherboard, peripherals, or components.
7.
•
Actual lighting and color will vary with LED strip.
•
If your LED strip does not light up, check if the addressable RGB LED strip is
connected in the correct orientation, and the 5V connector is aligned with the 5V
header on the motherboard.
•
The addressable RGB LED strip will only light up under the operating system.
•
The addressable RGB LED strip is purchased separately.
Thermal sensor connector (2-pin T_SENSOR)
This connector is for the thermistor cable that allows you to monitor the temperature of
your motherboard’s critical components and connected devices.
T_SENSOR
GND
SENSOR IN
PIN 1
ROG STRIX X370-I GAMING Thermal sensor connector
1-12
Chapter 1: Product Introduction
8.
System panel connector (10-1 pin F_PANEL)
Chapter 1
This connector supports several chassis-mounted functions.
(NC)
HWRST#
Ground
HDD_LEDHDD_LED+
PIN 1
RESET
GND
PWR
PWR_LEDPWR_LED+
+HDD_LED-
+PWR LED- PWR_BTN
F_PANEL
ROG STRIX X370-I GAMING System panel connector
•
System power LED (2-pin PWR_LED)
This 2-pin connector is for the system power LED. Connect the chassis power LED
cable to this connector. The system power LED lights up when you turn on the system
power, and blinks when the system is in sleep mode.
•
Hard disk drive activity LED (2-pin HDD_LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable
to this connector. The HDD LED lights up or flashes when data is read from or written
to the HDD.
•
ATX power button/soft-off button (2-pin PWR_BTN)
This connector is for the system power button.
•
Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system reboot without
turning off the system power.
9.
Speaker connector (4-pin SPEAKER)
The 4-pin connector is for the chassis-mounted system warning speaker. The speaker
allows you hear system beeps and warnings.
SPEAKER
Speaker Out
GND
GND
+5V
PIN 1
ROG STRIX X370-I GAMING
Speaker out connector
ROG STRIX X370-I GAMING
1-13
10.CPU and chassis fan connectors; AIO pump connector
(4-pin CPU_FAN; 4-pin CHA_FAN; 4-pin AIO_PUMP)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
GND
CHA FAN PWM
CHA FAN IN
CHA FAN PWR
GND
CPU FAN PWM
CPU FAN IN
CPU FAN PWR
AIO_PUMP CHA_FAN
AIO PUMP PWM
AIO PUMP IN
AIO PUMP PWR
GND
Chapter 1
CPU_FAN
ROG STRIX X370-I GAMING Fan connectors
•
DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow
inside the system may damage the motherboard components. These are not jumpers!
Do not place jumper caps on the fan connectors!
•
Ensure to fully insert the 4-pin CPU fan cable to the CPU fan connector.
•
The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power.
•
Connect the pump cable from the all-in-one cooler (AIO cooler) to the AIO_PUMP
connector, and connect the fan cable to the CPU_FAN connector.
11. M.2 sockets (M.2_1~2)
These sockets allow you to install M.2 SSD modules.
M.2_1(SOCKET3)
2280
2260
M.2_2(SOCKET3)
2242
(Bottom)
ROG STRIX X370-I GAMING M.2(SOCKET3)
•
For AMD Ryzen™ processors, the M.2_1 Socket 3 supports PCIE 3.0 x4 and SATA
mode M Key design and type 2242 / 2260 / 2280 storage devices.
•
For AMD 7th Generation A-series/Athlon™ processors, the M.2_1 Socket 3 supports
SATA mode M Key design and type 2242 / 2260 / 2280 storage devices.
•
For AMD X370 chipset, the M.2_2 Socket 3 supports PCIE 2.0 x4 M Key design and
type 2242 / 2260 / 2280 storage devices.
The M.2 SSD module is purchased separately.
1-14
Chapter 1: Product Introduction
12. RGB header (4-pin RGB_HEADER)
These connector is for RGB LED strips.
Chapter 1
RGB_HEADER
PIN 1
+12V G R B
ROG STRIX X370-I GAMING RGB header
The RGB header supports 5050 RGB multi-color LED strips (12V/G/R/B), with a maximum
power rating of 3A (12V), and no longer than 3 m.
Before you install or remove any component, ensure that the ATX power supply is switched
off or the power cord is detached from the power supply. Failure to do so may cause severe
damage to the motherboard, peripherals, or components.
•
Actual lighting and color will vary with LED strip.
•
If your LED strip does not light up, check if the RGB LED extension cable and the
RGB LED strip is connected in the correct orientation, and the 12V connector is
aligned with the 12V header on the motherboard.
•
The LED strip will only light up when the system is operating.
•
The LED strip is purchased separately.
ROG STRIX X370-I GAMING
1-15
Chapter 1
1-16
Chapter 1: Product Introduction
Chapter 2:
Basic Installation
Basic Installation
2.1
Building your PC system
2
The diagrams in this section are for reference only. The motherboard layout may vary with
models, but the installation steps are the same for all models.
2.1.1
Motherboard installation
Install the ASUS I/O Shield to the chassis rear I/O panel.
2.
Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to
the chassis’ rear I/O panel.
Chapter 2
1.
ROG STRIX X370-I GAMING
2-1
3.
Place four screws into the holes indicated by circles to secure the motherboard to the
chassis.
Chapter 2
DO NOT overtighten the screws! Doing so can damage the motherboard.
2-2
Chapter 2: Basic Installation
2.1.2
CPU installation
The AMD AM4 socket is compatible with AMD AM4 processors. Ensure you use a CPU
designed for the AM4 socket. The CPU fits in only one correct orientation. DO NOT force
the CPU into the socket to prevent bending the connectors on the socket and damaging
the CPU!
1
Chapter 2
2
3
ROG STRIX X370-I GAMING
2-3
2.1.3
Cooling system installation
Apply the Thermal Interface Material to the CPU
cooling system and CPU before you install the
cooling system and fan if necessary.
Type 1
2
3
4
Chapter 2
1
5
2-4
Chapter 2: Basic Installation
Type 2
2
Chapter 2
1
3
When using this type of CPU fan, remove the screws and the retention module only. Do not
remove the plate on the bottom.
ROG STRIX X370-I GAMING
2-5
To install an AIO cooler
Chapter 2
AIO_PUMP
CPU_FAN
CPU_OPT
The illustrations in this section are for reference only. Please refer to section 1.1.2
Motherboard Layout for the actual location of the header(s).
2-6
Chapter 2: Basic Installation
DIMM installation
Chapter 2
2.1.4
To remove a DIMM
ROG STRIX X370-I GAMING
2-7
2.1.5
A
ATX power connection
B
OR
Chapter 2
Ensure to connect the 8-pin power plug.
2.1.6
SATA device connection
OR
2-8
Chapter 2: Basic Installation
2.1.7
Front I/O connector
To install the front panel connector
To install front panel audio connector
AAFP
To install USB 2.0 connector
Chapter 2
To install USB 3.1 Gen 1 connector
USB 3.1 Gen 1
USB 2.0
2.1.8
Expansion card installation
To install PCIe x16 cards
ROG STRIX X370-I GAMING
2-9
2.1.9
M.2 installation
M.2_1 Socket (Top side)
When you remove or replace the
heatsink, please be careful not to
bend or damage the pins on the LED
connector.
Chapter 2
Install the M.2 standoff to the mounting
hole fit for your M.2 card.
4
2-10
Chapter 2: Basic Installation
Chapter 2
M.2_2 Socket (Bottom side)
Supported M.2 type varies per motherboard.
ROG STRIX X370-I GAMING
2-11
2.1.10
Wi-Fi antenna installation
Installing the ASUS 2T2R dual band W-Fi antennas
Connect the bundled ASUS 2T2R dual band Wi-Fi antennas to the Wi-Fi ports at the back of
the chassis.
Chapter 2
•
Ensure that the ASUS 2T2R dual band Wi-Fi antennas are securely installed to the
Wi-Fi ports.
•
Ensure that the antennas are at least 20 cm away from all persons.
The illustration above is for reference only. The I/O port layout may vary with models, but
the Wi-Fi antenna installation procedure is the same for all models.
2-12
Chapter 2: Basic Installation
2.2
Motherboard rear and audio connections
2.2.1
Rear I/O connection
1.
USB 3.1 Gen 1 ports 3~6
2.
LAN (RJ-45) port*
3.
USB 3.1 Gen 2 ports 1~2 (Type-A)
4.
Wi-Fi ports (Wi-Fi 802.11a/b/g/n/ac compliant)
5.
Audio I/O ports**
Chapter 2
Rear panel connectors
* and ** : Refer to the tables below for LAN port LEDs, and audio port definitions.
•
USB 3.1 Gen 1 / Gen 2 devices can only be used as data storage only.
•
Due to the design of AMD AM4 series chipset, all USB devices connected to the USB
2.0 and USB 3.1 Gen 1 ports are controlled by the xHCI controller.
* LAN ports LED indications
Activity Link LED
Speed LED
Status
Description
Status Description
Off
No link
Off
Orange
Linked
Orange 100 Mbps connection
Orange (Blinking) Data activity
Orange (Blinking
then steady)
Green
ACT/LINK SPEED
LED
LED
10 Mbps connection
LAN port
1 Gbps connection
Ready to wake up
from S5 mode
** Audio 2, 4, 6 or 8-channel configuration
Port
Headset
4-channel
6-channel
2-channel
Line In
Rear Speaker Out Rear Speaker Out
Rear Speaker Out
Front Speaker Out Front Speaker Out
Mic In
Bass/Center
–
–
Front Speaker Out
Bass/Center
Side Speaker Out
Light Blue (Rear
panel)
Lime (Rear panel) Line Out
Pink (Rear panel) Mic In
Lime (Front panel) –
ROG STRIX X370-I GAMING
8-channel
2-13
2.2.2
Audio I/O connections
Audio I/O ports
Line Out
Line In
Mic In
Connect to Headphone and Mic
Chapter 2
Connect to Stereo Speakers
Connect to 2 Speakers
2-14
Chapter 2: Basic Installation
Connect to 4 Speakers
Chapter 2
Connect to 6 Speakers
Connect to 8 Speakers
ROG STRIX X370-I GAMING
2-15
2.3
Starting up for the first time
Chapter 2
1.
After making all the connections, replace the system case cover.
2.
Ensure that all switches are off.
3.
Connect the power cord to the power connector at the back of the system chassis.
4.
Connect the power cord to a power outlet that is equipped with a surge protector.
5.
Turn on the devices in the following order:
a.Monitor
b.
External SCSI devices (starting with the last device on the chain)
c.
System power
6.
After applying power, the system power LED on the system front panel case lights up.
For systems with ATX power supplies, the system LED lights up when you press the
ATX power button. If your monitor complies with the “green” standards or if it has a
“power standby” feature, the monitor LED may light up or change from orange to green
after the system LED turns on.
The system then runs the power-on self tests (POST). While the tests are running, the
BIOS beeps (refer to the BIOS beep codes table) or additional messages appear on
the screen. If you do not see anything within 30 seconds from the time you turned on
the power, the system may have failed a power-on test. Check the jumper settings and
connections or call your retailer for assistance.
7.
2.4
BIOS Beep
Description
One short beep
VGA detected
Quick boot set to disabled
No keyboard detected
One continuous beep followed by two
short beeps then a pause (repeated)
No memory detected
One continuous beep followed by three
short beeps
No VGA detected
One continuous beep followed by four
short beeps
Hardware component failure
At power on, hold down the <Delete> key to enter the BIOS Setup. Follow the
instructions in Chapter 3.
Turning off the computer
While the system is ON, press the power button for less than four seconds to put the system
on sleep mode or soft-off mode, depending on the BIOS setting. Press the power button
for more than four seconds to let the system enter the soft-off mode regardless of the BIOS
setting.
2-16
Chapter 2: Basic Installation
Chapter 2
ROG STRIX X370-I GAMING
2-17
Chapter 3:
BIOS Setup
BIOS Setup
3.1
Knowing BIOS
3
The new ASUS UEFI BIOS is a Unified Extensible Interface that complies with UEFI
architecture, offering a user-friendly interface that goes beyond the traditional keyboardonly BIOS controls to enable a more flexible and convenient mouse input. You can easily
navigate the new UEFI BIOS with the same smoothness as your operating system. The
term “BIOS” in this user manual refers to “UEFI BIOS” unless otherwise specified.
BIOS (Basic Input and Output System) stores system hardware settings such as storage
device configuration, overclocking settings, advanced power management, and boot
device configuration that are needed for system startup in the motherboard CMOS. In
normal circumstances, the default BIOS settings apply to most conditions to ensure
optimal performance. DO NOT change the default BIOS settings except in the following
circumstances:
•
An error message appears on the screen during the system bootup and requests you to
run the BIOS Setup.
•
You have installed a new system component that requires further BIOS settings or
update.
Chapter 3
Inappropriate BIOS settings may result to instability or boot failure. We strongly
recommend that you change the BIOS settings only with the help of a trained service
personnel.
When downloading or updating the BIOS file, rename it as RX370IGM.CAP for this
motherboard.
ROG STRIX X370-I GAMING
3-1
3.2
BIOS setup program
Use the BIOS Setup to update the BIOS or configure its parameters. The BIOS screen
include navigation keys and brief onscreen help to guide you in using the BIOS Setup
program.
Entering BIOS at startup
To enter BIOS Setup at startup, press <Delete> or <F2> during the Power-On Self Test
(POST). If you do not press <Delete> or <F2>, POST continues with its routines.
Entering BIOS Setup after POST
To enter BIOS Setup after POST:
•
Press <Ctrl>+<Alt>+<Delete> simultaneously.
•
Press the reset button on the system chassis.
•
Press the power button to turn the system off then back on. Do this option only if you
failed to enter BIOS Setup using the first two options.
After doing either of the three options, press <Delete> key to enter BIOS.
Chapter 3
•
The BIOS setup screens shown in this section are for reference purposes only, and
may not exactly match what you see on your screen.
•
Ensure that a USB mouse is connected to your motherboard if you want to use the
mouse to control the BIOS setup program.
•
If the system becomes unstable after changing any BIOS setting, load the default
settings to ensure system compatibility and stability. Select the Load Optimized
Defaults item under the Exit menu or press hotkey <F5>. See section 3.10 Exit Menu
for details.
•
If the system fails to boot after changing any BIOS setting, try to clear the CMOS and
reset the motherboard to the default value. See section 1.1.7 Headers for information
on how to erase the RTC RAM via the Clear CMOS button.
•
The BIOS setup program does not support the Bluetooth devices.
Please visit ASUS website for the detailed BIOS content manual.
BIOS menu screen
The BIOS Setup program can be used under two modes: EZ Mode and Advanced Mode.
You can change modes from Setup Mode in Boot menu or by pressing the <F7> hotkey.
3-2
Chapter 3: BIOS Setup
3.2.1
Advanced Mode
By default, the Advanced Mode screen appears when you enter the BIOS setup program.
The Advanced Mode provides advanced options for experienced end-users to configure
the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the
following sections for the detailed configurations. To access the EZ Mode, click EzMode(F7)
or press <F7>.
The default screen for entering the BIOS setup program can be changed. Refer to the
Setup Mode item in section Boot menu for details.
Language
Scroll bar
MyFavorite(F3) Qfan Control(F6) EZ Tuning Wizard(F11) Hot Keys
Chapter 3
Menu items
Menu bar
Submenu items General help
Configuration fields
Pop-up Menu
Last modified settings
ROG STRIX X370-I GAMING
Go back to EZ Mode
Search on the FAQ
Displays the CPU temperature,
CPU, and memory voltage output
3-3
Menu bar
The menu bar on top of the screen has the following main items:
My Favorites
For saving the frequently-used system settings and configuration.
Main
For changing the basic system configuration
Ai Tweaker
For changing the overclocking settings
Advanced
For changing the advanced system settings
Monitor
For displaying the system temperature, power status, and changing
the fan settings.
Boot
For changing the system boot configuration
Tool
For configuring options for special functions
Exit
For selecting the exit options and loading default settings
Menu items
The highlighted item on the menu bar displays the specific items for that menu. For example,
selecting Main shows the Main menu items.
The other items (My Favorites, Ai Tweaker, Advanced, Monitor, Boot, Tool, and Exit) on the
menu bar have their respective menu items.
Submenu items
A greater than sign (>) before each item on any menu screen means that the item has a
submenu. To display the submenu, select the item and press <Enter>.
Language
This button above the menu bar contains the languages that you can select for your BIOS.
Click this button to select the language that you want to display in your BIOS screen.
Chapter 3
My Favorites(F3)
This button above the menu bar shows all BIOS items in a Tree Map setup. Select frequentlyused BIOS settings and save it to MyFavorites menu.
Refer to section 3.3 My Favorites for more information.
Q-Fan Control(F6)
This button above the menu bar displays the current settings of your fans. Use this button to
manually tweak the fans to your desired settings.
Refer to section 3.2.3 QFan Control for more information.
EZ Tuning Wizard(F11)
This button above the menu bar allows you to view and tweak the overclocking settings of
your system.
Refer to section 3.2.4 EZ Tuning Wizard for more information.
3-4
Chapter 3: BIOS Setup
Search on FAQ
Move your mouse over this button to show a QR code, scan this QR code on your mobile
device to connect to the BIOS FAQ web page of the ASUS support website. You can also
scan the following QR code:
Hot keys
This button above the menu bar contains the navigation keys for the BIOS setup program.
Use the navigation keys to select items in the menu and change the settings.
Scroll bar
A scroll bar appears on the right side of a menu screen when there are items that do not fit
on the screen. Press the Up/Down arrow keys or <Page Up> / <Page Down> keys to display
the other items on the screen.
General help
At the bottom of the menu screen is a brief description of the selected item. Use <F12> key
to capture the BIOS screen and save it to the removable storage device.
Configuration fields
Chapter 3
These fields show the values for the menu items. If an item is user-configurable, you can
change the value of the field opposite the item. You cannot select an item that is not user-configurable.
A configurable field is highlighted when selected. To change the value of a field, select it and
press <Enter> to display a list of options.
Last Modified button
This button shows the items that you last modified and saved in BIOS Setup.
ROG STRIX X370-I GAMING
3-5
3.2.2
EZ Mode
The EZ Mode provides you an overview of the basic system information, and allows you to
select the display language, system performance, mode and boot device priority.
To switch from Advanced Mode to EZ Mode, click EZ Mode(F7) or press the <F7> hotkey.
Displays the system properties of the selected mode.
Click < or > to switch EZ System Tuning modes
Displays the CPU/motherboard temperature,
CPU voltage output, CPU/chassis fan speed,
and SATA information
Selects the display language
of the BIOS setup program
Configures system overclocking
Chapter 3
Displays the CPU Fan’s speed. Click
the button to manually tune the fans
Loads optimized
default settings
Saves the changes
and resets the system
Click to go to Advanced mode
Search on the FAQ
Click to display boot devices
Selects the boot device priority
The boot device options vary depending on the devices you installed to the system.
3-6
Chapter 3: BIOS Setup
3.2.3
Q-Fan Control
The QFan Control allows you to set a fan profile or manually configure the operating speed of
your CPU and chassis fans.
Click to select a fan to be
configured
ROG STRIX X370-I GAMING
Click to activate DC Mode
Click to apply the fan setting
Click to undo the
changes
Click to go back to main menu
Chapter 3
Select a profile to
apply to your fans
Click to activate
PWM Mode
Select to manually configure
your fans
3-7
Configuring fans manually
Select Manual from the list of profiles to manually configure your fans’ operating speed.
Speed points
Select to manually
configure your fans
To configure your fans:
Chapter 3
3-8
1.
Select the fan that you want to configure and to view its current status.
2.
Click and drag the speed points to adjust the fans’ operating speed.
3.
Click Apply to save the changes then click Exit (ESC).
Chapter 3: BIOS Setup
3.2.4
EZ Tuning Wizard
EZ Tuning Wizard allows you to easily overclock your CPU and DRAM, computer usage, and
CPU fan to their best settings.
OC setup
OC Tuning
To start OC Tuning:
Press <F11> on your keyboard or click
EZ Tuning Wizard screen.
2.
Click OC then click Next.
3.
Select a PC scenario Daily Computing or Gaming/Media Editing, then click Next.
ROG STRIX X370-I GAMING
from the BIOS screen to open
Chapter 3
1.
3-9
4.
Select a Main Cooling System BOX cooler, Tower cooler, Water cooler, or I’m not
sure, then click Next.
5.
After selecting the Main Cooling System, click Next then click Yes to start the OC
Tuning.
3.3
My Favorites
My Favorites is your personal space where you can easily save and access your favorite
BIOS items.
Chapter 3
My Favorites comes with several performance, power saving, and fast boot related items by
default. You can personalize this screen by adding or removing items.
3-10
Chapter 3: BIOS Setup
Adding items to My Favorites
To add BIOS items:
1.
Press <F3> on your keyboard or click
Setup Tree Map screen.
from the BIOS screen to open
2.
On the Setup Tree Map screen, select the BIOS items that you want to save in My
Favorites screen.
Main menu panel
Selected shortcut
items
Submenu panel
Delete all favorite
items
Recover to default
favorite items
3.
Select an item from main menu panel, then click the submenu that you want to save as
favorite from the submenu panel and click
or press <Enter> on your keyboard.
4.
Click Exit (ESC) or press <Esc> key to close Setup Tree Map screen.
5.
Go to My Favorites menu to view the saved BIOS items.
ROG STRIX X370-I GAMING
Chapter 3
You cannot add user-managed items such as language and boot order to My Favorites.
3-11
3.4
Main menu
The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup
program. The Main menu provides you an overview of the basic system information, and
allows you to set the system date, time, language, and security settings.
Security
The Security menu items allow you to change the system security settings.
3.5
•
If you have forgotten your BIOS password, erase the CMOS Real Time Clock (RTC)
RAM to clear the BIOS password. See section 1.1.7 Headers for information on how
to erase the RTC RAM via the Clear CMOS button.
•
The Administrator or User Password items on top of the screen show the default [Not
Installed]. After you set a password, these items show [Installed].
Ai Tweaker menu
The Ai Tweaker menu items allow you to configure overclocking-related items.
Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field
values can cause the system to malfunction
The configuration options for this section vary depending on the CPU and DIMM model you
installed on the motherboard.
Ai Overclock Tuner
Chapter 3
Allows you to select the CPU overclocking options to achieve the desired CPU internal
frequency. Configuration options:
[Auto]
Loads the optimal settings for the system.
[Manual]
Allows you to individually set overclocking parameters.
Memory Frequency
This item allows you to set the memory operating frequency. The configurable options vary
with the BCLK (base clock) frequency setting. Select the auto mode to apply the optimized
setting. Configuration options: [Auto] [DDR4-1333MHz] [DDR4-1600MHz] [DDR4-1866MHz]
[DDR4-2133MHz] [DDR4-2400MHz]
Selecting a very high memory frequency may cause the system to become unstable! If this
happens, revert to the default setting.
EPU Power Saving Mode
The ASUS EPU (Energy Processing Unit) sets the CPU in its minimum power consumption
settings. Enable this item to set lower CPU core/cache voltage and achieve the best energy
saving condition. Configuration options: [Disabled] [Enabled]
3-12
Chapter 3: BIOS Setup
TPU
This item allows you to automatically overclock the CPU and DRAM frequencies and voltage
for an enhanced system performance.
[Keep Current Settings]
Keep the current settings without changing anything.
[TPU I]
Applies air cooling overclocking conditions.
[TPU II]
Applies water cooling overclocking conditions.
Ensure to use water cooling device before selecting [TPU II].
3.6
Advanced menu
The Advanced menu items allow you to change the settings for the CPU and other system
devices.
Be cautious when changing the settings of the Advanced menu items. Incorrect field values
can cause the system to malfunction.
3.6.1
AMD fTPM Configuration
The items in this menu allow you to configure the AMD fTPM settings.
3.6.2
CPU Configuration
The items in this menu show the CPU-related information that the BIOS automatically
detects.
Chapter 3
The items in this menu may vary based on the CPU installed.
PSS Support
This item allows you enable or disable the generation of ACPI_PPC, _PSS, and _PCT
objects. Configuration options: [Disabled] [Enabled]
NX Mode
This item allows you enable or disable no-execute page protection function.
Configuration options: [Disabled] [Enabled]
SVM Mode
This item allows you enable or disable CPU Virtualization.
Configuration options: [Disabled] [Enabled]
Core Leveling Mode
This item allows you to change the number of compute unit in the system.
Configuration options: [Automatic mode] [One Computer Unit]
ROG STRIX X370-I GAMING
3-13
3.6.3
SATA Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Empty if no SATA device is installed to the corresponding SATA port.
SATA Port Enable
This item allows you to enable or disable the SATA Device.
Configuration options: [Disabled] [Enabled]
SATA Mode
This item allows you to set the SATA configuration.
[AHCI]
Set to [AHCI] when you want the SATA hard disk drives to use the
AHCI (Advanced Host Controller Interface). The AHCI allows the
onboard storage driver to enable advanced Serial ATA features that
increases storage performance on random workloads by allowing
the drive to internally optimize the order of commands.
[RAID]
Set to [RAID] when you want to create a RAID configuration from
the SATA hard disk drives.
SMART Self Test
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system that
shows a warning message during POST (Power-on Self Test) when an error occurs in the
hard disks. Configuration options: [On] [Off]
SATA6G_1~4 (Gray)
Allow you to enable/disable the SATA6G_1~4 port. Configuration options: [Disabled]
[Enabled]
Chapter 3
Hot Plug
These items allow you to enable/disable SATA Hot Plug Support. Configuration options:
[Disabled] [Enabled]
M.2_1
Click to assign a new name for the M.2_1 port.
3.6.4
Onboard Devices Configuration
The items in this menu allow you to switch between PCIe Lanes and configure onboard
devices.
HD Audio Controller
This item allows you to use the Azalia High Definition Audio Controller.
Configuration options: [Disabled] [Enabled]
3-14
Chapter 3: BIOS Setup
Audio Jack LED Lighting
[Disabled]
The audio jack LEDs will not light up.
[Auto]
The audio jack LEDs will light up in the S0(Working), S3(sleep),
S4(hibernate) and S5(soft off) states.
When the ErP Ready item is set to Enable(S5), the audio jack LEDs will not
light up in the S5 state.
When the ErP Ready item is set to Enable(S4+S5), the audio jack LEDs
will not light up in the S4 and S5 states.
RGB LED Lighting
When the system is in working state
[On]
The motherboard LEDs, RGB and ADD header(s) will always light up
in the S0(Working) state, but not light up in any state when the ErP
Ready item is enabled.
[Off]
The motherboard LEDs, RGB and ADD header(s) will not light up.
When the system is in sleep, hibernate and soft off states
[On] The motherboard LEDs will light up in S3(sleep), S4(hibernate) and
S5(soft off) states, but not light up in any state when the ErP Ready
item is enabled.
[Off]
The motherboard LEDs will not light up.
Intel LAN Controller
This item allows you to enable or disable the Intel LAN controllers.
Configuration options: [On] [Off]
Intel LAN OPROM
Chapter 3
This item allows you to enable or disable the Intel PXE OPROM.
Configuration options: [On] [Off]
Wi-Fi Controller
This item allows you to enable or disable the Wi-Fi controller.
Configuration options: [Disabled] [Enabled]
Bluetooth Controller
This item allows you to enable or disable the Bluetooth controller.
Configuration options: [Disabled] [Enabled]
3.6.5
APM Configuration
The items in this menu allow you to set system wake and sleep settings.
ErP Ready [Disabled]
This item allows you to switch off some power at S4+S5 or S5 to get the system ready for
ErP requirement. When set to [Enabled], all other PME options are switched off.
Configuration options: [Disabled] [Enable(S4+S5)] [Enable(S5)]
ROG STRIX X370-I GAMING
3-15
Restore On AC Power Loss
This item allows your system to go to ON state, OFF state, or both states after an AC power
loss. When setting your system to [Last State], it goes to the previous state before the AC
power loss. Configuration options: [Power Off] [Power On] [Last State]
Power On By PCI-E
This item allows you to enable or disable the Wake-on-LAN function of the onboard LAN
controller or other installed PCI-E LAN cards. Configuration options: [Disabled] [Enabled]
Power On By RTC
This item allows you to enable or disable the RTC (Real-Time Clock) to generate a wake
event and configure the RTC alarm date. When enabled, you can set the days, hours,
minutes, or seconds to schedule an RTC alarm date.
Configuration options: [Disabled] [Enabled]
3.6.6
Network Stack Configuration
The items in this menu allow you to enable or disable the UEFI network stack
3.6.7
HDD/SSD SMART Information
This menu displays the SMART information of the connected devices.
NVM Express devices do not support SMART information.
3.6.8
USB Configuration
The items in this menu allow you to change the USB-related features.
Chapter 3
The Mass Storage Devices item shows the auto-detected values. If no USB device is
detected, the item shows None.
USB Single Port Control
This item allows you to enable or disable the individual USB ports.
Refer to section 1.1.2 Motherboard layout for the location of the USB ports.
3-16
Chapter 3: BIOS Setup
3.7
Monitor menu
The Monitor menu displays the system temperature/power status, and allows you to change
the fan settings.
Q-Fan Configuration
The subitems in this menu allow you to configure the Q-Fan features.
Qfan Tuning
Click this item to automatically detect the lowest speed and configure the minimum duty cycle
for each fan.
3.8
Boot menu
The Boot menu items allow you to change the system boot options.
Fast Boot
[Disabled]
Allows your system to go back to its normal boot speed.
[Enabled]
Allows your system to accelerate the boot speed.
The following items appear only when you set the Fast Boot to [Enabled].
Next Boot after AC Power Loss
[Normal Boot] Returns to normal boot on the next boot after an AC power loss.
[Fast Boot]
Accelerates the boot speed on the next boot after an AC power loss.
Boot Configuration
Chapter 3
Setup Mode
[Advanced Mode]This item allows you to go to Advanced Mode of the BIOS after
POST.
[EZ Mode]
This item allows you to go to EZ Mode of the BIOS after POST.
CSM (Compatibility Support Module)
This item allows you to configure the CSM (Compatibility Support Module) items to fully
support the various VGA, bootable devices and add-on devices for better compatibility.
Launch CSM
[Auto]
The system automatically detects the bootable devices and the addon devices.
[Enabled]
For better compatibility, enable the CSM to fully support the non-UEFI
driver add-on devices or the Windows® UEFI mode.
[Disabled]
Disable the CSM to fully support the Windows® the Windows secure
update and secure boot.
ROG STRIX X370-I GAMING
3-17
The following items appear only when you set the Launch CSM to [Enabled].
Boot Devices Control [UEFI and Legacy OPROM]
This item allows you to select the type of devices that you want to boot.
Configuration options: [UEFI and Legacy OPROM] [Legacy OPROM only]
[UEFI only]
Boot from Network Devices [Legacy only]
This item allows you to select the type of network devices that you want to
launch. Configuration options: [Ignore] [Legacy only] [UEFI driver first]
Boot from Storage Devices [Legacy only]
This item allows you to select the type of storage devices that you want to
launch. Configuration options: [Ignore] [Legacy only] [UEFI driver first]
Boot from PCI-E Expansion Devices [Legacy only]
This item allows you to select the type of PCI-E/PCI expansion devices that
you want to launch. Configuration options: [Legacy only] [UEFI driver first]
Secure Boot
This item allows you to configure the Windows® Secure Boot settings and manage its keys to
protect the system from unauthorized access and malwares during POST.
Boot Option Priorities
These items specify the boot device priority sequence from the available devices. The
number of device items that appears on the screen depends on the number of devices
installed in the system.
Chapter 3
•
To access Windows® OS in Safe Mode, press <F8> after POST.
•
To select the boot device during system startup, press <F8> when the ASUS Logo
appears.
Boot Override
These items displays the available devices. The number of device items that appears on
the screen depends on the number of devices installed in the system. Click an item to start
booting from the selected device.
3-18
Chapter 3: BIOS Setup
3.9
Tool menu
The Tool menu items allow you to configure options for special functions. Select an item then
press <Enter> to display the submenu.
3.9.1
ASUS EZ Flash 3 Utility
This item allows you to run ASUS EZ Flash 3. When you press <Enter>, a confirmation
message appears. Use the left/right arrow key to select between [Yes] or [No], then press
<Enter> to confirm your choice.
For more details, refer to section 3.11.2 ASUS EZ Flash 3.
3.9.2
Secure Erase
SSD speeds may lower over time as with any storage medium due to data processing.
Secure Erase completely and safely cleans your SSD, restoring it to factory performance
levels.
Secure Erase is only available in AHCI mode. Ensure to set the SATA mode to AHCI. Click
Advanced > SATA Configuration > SATA Mode > AHCI.
To launch Secure Erase, click Tool > Secure Erase on the Advanced mode menu.
Secure Erase is only supported on selected SATA SSDs, and cannot erase NVMe storage
devices.
Chapter 3
The time to erase the contents of your SSD may take a while depending on its size. Do not
turn off the system during the process.
Displays the
available SSDs
ROG STRIX X370-I GAMING
3-19
Status definition:
3.9.3
•
Frozen. The frozen state is the result of a BIOS protective measure. The BIOS
guards drives that do not have password protection by freezing them prior to booting.
If the drive is frozen, a power off or hard reset of your PC must be performed to
proceed with the Secure Erase.
•
Locked. SSDs might be locked if the Secure Erase process is either incomplete
or was stopped. This may be due to a third party software that uses a different
password defined by ASUS. You have to unlock the SSD in the software before
proceeding with Secure Erase.
ASUS Overclocking Profile
This item allows you to store or load multiple BIOS settings.
Load from Profile
This item allows you to load the previous BIOS settings saved in the BIOS Flash. Key in the
profile number that saved your BIOS settings, press <Enter>, and then select Yes.
•
DO NOT shut down or reset the system while updating the BIOS to prevent the
system boot failure!
•
We recommend that you update the BIOS file only coming from the same memory/
CPU configuration and BIOS version.
Profile Name
This item allows you to key in a profile name.
Save to Profile
Chapter 3
This item allows you to save the current BIOS settings to the BIOS Flash, and create a
profile. Key in a profile number from one to eight, press <Enter>, and then select Yes.
Load/Save Profile from/to USB Drive
This item allows you to load or save profile from your USB drive, load and save profile to your
USB drive.
3.9.4
ASUS SPD Information
This item allows you to view the DRAM SPD information.
3.9.5
Graphics Card Information
This item displays the information about the graphics card installed in your system.
GPU Post
This item displays the information and recommended configuration for the PCIE slots that the
graphics card is installed in your system.
This feature is only supported on selected ASUS graphics cards.
3-20
Chapter 3: BIOS Setup
3.10
Exit menu
The Exit menu items allow you to load the optimal default values for the BIOS items, and
save or discard your changes to the BIOS items. You can access the EZ Mode from the Exit
menu.
Load Optimized Defaults
This option allows you to load the default values for each of the parameters on the Setup
menus. When you select this option or if you press <F5>, a confirmation window appears.
Select OK to load the default values.
Save Changes & Reset
Once you are finished making your selections, choose this option from the Exit menu to
ensure the values you selected are saved. When you select this option or if you press <F10>,
a confirmation window appears. Select OK to save changes and exit.
Discard Changes and Exit
This option allows you to exit the Setup program without saving your changes. When you
select this option or if you press <Esc>, a confirmation window appears. Select Yes to
discard changes and exit.
Launch EFI Shell from USB drives
This item allows you to attempt to launch the EFI Shell application (shellx64.efi) from one of
the available USB drives.
3.11
Updating BIOS
Chapter 3
The ASUS website publishes the latest BIOS versions to provide enhancements on system
stability, compatibility,and performance. However, BIOS updating is potentially risky. If
there is no problem using the current version of BIOS, DO NOT manually update the BIOS.
Inappropriate BIOS updating may result to system’s failure to boot. Carefully follow the
instructions in this chapter to update your BIOS when necessary.
Visit http://www.asus.com to download the latest BIOS file for this motherboard.
The following utilities allow you to manage and update the motherboard BIOS setup program.
1.
EZ Update: Updates the BIOS in Windows® environment.
2.
ASUS EZ Flash 3: Updates the BIOS using a USB flash drive.
3.
ASUS CrashFree BIOS 3: Restores the BIOS using the motherboard support DVD or a
USB flash drive when the BIOS file fails or gets corrupted.
3.11.1
EZ Update
The EZ Update is a utility that allows you to update the motherboard BIOS in Windows®
environment.
•
EZ Update requires an Internet connection either through a network or an ISP
(Internet Service Provider).
•
This utility is available in the support DVD that comes with the motherboard package.
ROG STRIX X370-I GAMING
3-21
3.11.2
ASUS EZ Flash 3
ASUS EZ Flash 3 allows you to download and update to the latest BIOS through the Internet
without having to use a bootable floppy disk or an OS‑based utility.
Updating through the Internet varies per region and Internet conditions. Check your local
Internet connection before updating through the Internet.
To update the BIOS by USB:
Chapter 3
3-22
1.
Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select
ASUS EZ Flash Utility and press <Enter>.
2.
Insert the USB flash disk that contains the latest BIOS file to the USB port.
3.
Select via Storage Devices.
4.
Press <Tab> to switch to the Drive field.
5.
Press the Up/Down arrow keys to find the USB flash disk that contains the latest BIOS,
and then press <Enter>.
6.
Press <Tab> to switch to the Folder Info field.
7.
Press the Up/Down arrow keys to find the BIOS file, and then press <Enter> to perform
the BIOS update process. Reboot the system when the update process is done.
Chapter 3: BIOS Setup
•
This function can support devices such as a USB flash disk with FAT 32/16 format and
single partition only.
•
DO NOT shut down or reset the system while updating the BIOS to prevent system
boot failure!
Ensure to load the BIOS default settings to ensure system compatibility and stability. Select
the Load Optimized Defaults item under the Exit menu. See section 3.10 Exit Menu for
details.
1.
Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select
ASUS EZ Flash Utility and press <Enter>.
2.
Select via Internet.
3.
Press the Left/Right arrow keys to select an Internet connection method, and then
press <Enter>.
4.
Follow the onscreen instructions to complete the update.
5.
Reboot the system when the update process is done.
Chapter 3
To update the BIOS by Internet:
Ensure to load the BIOS default settings to ensure system compatibility and stability. Select
the Load Optimized Defaults item under the Exit menu. See section 3.10 Exit Menu for
details.
ROG STRIX X370-I GAMING
3-23
3.11.3
ASUS CrashFree BIOS 3
The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the
BIOS file when it fails or gets corrupted during the updating process. You can restore a
corrupted BIOS file using the motherboard support DVD or a USB flash drive that contains
the BIOS file.
The BIOS file in the motherboard support DVD may be older than the BIOS file published
on the ASUS official website. If you want to use the newer BIOS file, download the file at
https://www.asus.com/support/ and save it to a USB flash drive.
Recovering the BIOS
To recover the BIOS:
1.
Turn on the system.
2.
Insert the motherboard support DVD to the optical drive, or the USB flash drive
containing the BIOS file to the USB port.
3.
The utility automatically checks the devices for the BIOS file. When found, the utility
reads the BIOS file and enters ASUS EZ Flash 3 automatically.
4.
The system requires you to enter BIOS Setup to recover the BIOS setting. To ensure
system compatibility and stability, we recommend that you press <F5> to load default
BIOS values.
DO NOT shut down or reset the system while updating the BIOS! Doing so can cause
system boot failure!
Chapter 3
3-24
Chapter 3: BIOS Setup
Chapter 4:
RAID Support
RAID Support
4.1
RAID configurations
4
The motherboard supports RAID 0, RAID 1, and RAID 10 solution.
If you want to install a Windows® operating system to a hard disk drive included in a RAID
set, you have to create a RAID driver disk and load the RAID driver during OS installation.
Refer to section 4.2 Creating a RAID driver disk for details.
4.1.1
RAID definitions
RAID 0 (Data striping) optimizes two identical hard disk drives to read and write data in
parallel, interleaved stacks. Two hard disks perform the same work as a single drive but at a
sustained data transfer rate, double that of a single disk alone, thus improving data access
and storage. Use of two new identical hard disk drives is required for this setup.
RAID 1 (Data mirroring) copies and maintains an identical image of data from one drive to
a second drive. If one drive fails, the disk array management software directs all applications
to the surviving drive as it contains a complete copy of the data in the other drive. This RAID
configuration provides data protection and increases fault tolerance to the entire system. Use
two new drives or use an existing drive and a new drive for this setup. The new drive must be
of the same size or larger than the existing drive.
Chapter 4
RAID 10 is data striping and data mirroring combined without parity (redundancy data) having
to be calculated and written. With the RAID 10 configuration you get all the benefits of both
RAID 0 and RAID 1 configurations. Use four new hard disk drives or use an existing drive
and three new drives for this setup.
ROG STRIX X370-I GAMING
4-1
4.1.2
Installing Serial ATA hard disks
The motherboard supports Serial ATA hard disk drives. For optimal performance, install
identical drives of the same model and capacity when creating a disk array.
To install the SATA hard disks for a RAID configuration:
1.
Install the SATA hard disks into the drive bays.
2.
Connect the SATA signal cables.
3.
Connect a SATA power cable to the power connector on each drive.
4.2
Creating a RAID driver disk
4.2.1
Creating a RAID driver disk in Windows®
To install the RAID driver for Windows® OS:
1.
During the OS installation, click Load Driver to allow you to select the installation
media containing the RAID driver.
2. Insert the support USB drive with RAID driver into the USB port, and then click
Browse.
3. Click the name of the device you’ve inserted, go to Drivers > RAID, and then select
the RAID driver for the corresponding OS version. Click OK.
4. Follow the succeeding screen instructions to complete the installation.
To set up a Windows® UEFI operating system under RAID mode, ensure to load the UEFI
driver for your optical drive.
Chapter 4
4-2
Chapter 4: RAID Support
Appendix
Appendix
Appendix
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
•
This device may not cause harmful interference.
•
This device must accept any interference received including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with manufacturer’s instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment to an outlet on a circuit different from that to which the receiver
is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics card is required
to assure compliance with FCC regulations. Changes or modifications to this unit not
expressly approved by the party responsible for compliance could void the user’s authority
to operate this equipment.
Compliance Statement of Innovation, Science and Economic
Development Canada (ISED)
This device complies with Innovation, Science and Economic Development Canada licence
exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite systems.
CAN ICES-3(B)/NMB-3(B)
Déclaration de conformité de Innovation, Sciences et
Développement économique Canada (ISED)
Le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement
économique Canada applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage,
et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
ROG STRIX X370-I GAMING
A-1
La bande 5150–5250 MHz est réservée uniquement pour une utilisation à l’intérieur afin de
réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les
mêmes canaux.
CAN ICES-3(B)/NMB-3(B)
Appendix
VCCI: Japan Compliance Statement
Class B ITE
KC: Korea Warning Statement
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of
Chemicals) regulatory framework, we published the chemical substances in our products at
ASUS REACH website at http://csr.asus.com/english/REACH.htm.
DO NOT throw the motherboard in municipal waste. This product has been designed to
enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin
indicates that the product (electrical and electronic equipment) should not be placed in
municipal waste. Check local regulations for disposal of electronic products.
DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol
of the crossed out wheeled bin indicates that the battery should not be placed in municipal
waste.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards
for protecting our environment. We believe in providing solutions for you to be able to
responsibly recycle our products, batteries, other components as well as the packaging
materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling
information in different regions.
A-2
Appendix
Regional notice for California
Appendix
WARNING
Cancer and Reproductive Harm www.P65Warnings.ca.gov
RF exposure warning
This equipment must be installed and operated in accordance with provided instructions and
the antenna(s) used for this transmitter must be installed to provide a separation distance of
at least 20 cm from all persons and must not be co-located or operating in conjunction with
any other antenna or transmitter. End-users and installers must be provide with antenna
installation instructions and transmitter operating conditions for satisfying RF exposure
compliance.
FCC Bluetooth Wireless Compliance
The antenna used with this transmitter must not be co-located or operated in conjunction with
any other antenna or transmitter subject to the conditions of the FCC Grant.
Bluetooth Industry Canada Statement
This Class B device meets all requirements of the Canadian interference-causing equipment
regulations.
Déclaration d’Industrie Canada relative aux modules sans fil
Bluetooth
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.
NCC: Taiwan Wireless Statement
ROG STRIX X370-I GAMING
A-3
Japan RF Equipment Statement
屋外での使用について
Appendix
本製品は、5GHz帯域での通信に対応しています。電波法の定めにより5.2GHz、5.3GHz帯域の電
波は屋外で使用が禁じられています。
法律および規制遵守
本製品は電波法及びこれに基づく命令の定めるところに従い使用してください。日本国外では、
その国の法律または規制により、本製品の使用ができないことがあります。このような国では、本
製品を運用した結果、罰せられることがありますが、当社は一切責任を負いかねますのでご了承
ください。
Précautions d’emploi de l’appareil :
a.
Soyez particulièrement vigilant quant à votre sécurité lors de l’utilisation de cet appareil
dans certains lieux (les avions, les aéroports, les hôpitaux, les stations-service et les
garages professionnels).
b.
Évitez d’utiliser cet appareil à proximité de dispositifs médicaux implantés. Si
vous portez un implant électronique (stimulateurs cardiaques, pompes à insuline,
neurostimulateurs…), veuillez impérativement respecter une distance minimale de 15
centimètres entre cet appareil et l’implant pour réduire les risques d’interférence.
c.
Utilisez cet appareil dans de bonnes conditions de réception pour minimiser le niveau
de rayonnement. Ce n’est pas toujours le cas dans certaines zones ou situations,
notamment dans les parkings souterrains, dans les ascenseurs, en train ou en voiture
ou tout simplement dans un secteur mal couvert par le réseau.
d.
Tenez cet appareil à distance du ventre des femmes enceintes et du bas-ventre des
adolescents.
Google™ License Terms
Copyright© 2017 Google Inc. All Rights Reserved.
Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file
except in compliance with the License. You may obtain a copy of the License at:
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the
License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF
ANY KIND, either express or implied.
See the License for the specific language governing permissions and limitations under the
License.
A-4
Appendix
ROG STRIX X370-I GAMING
Forenklet EU-overensstemmelseserklæring
ASUSTeK Computer Inc. erklærer hermed at denne enhed er i
overensstemmelse med hovedkravene og øvrige relevante bestemmelser i
direktivet 2014/53/EU. Hele EU-overensstemmelseserklæringen kan findes på
https://www.asus.com/support/
Wi-Fi, der bruger 5150-5350 MHz skal begrænses til indendørs brug i lande,
der er anført i tabellen:
Vereenvoudigd EU-conformiteitsverklaring
ASUSTeK Computer Inc. verklaart hierbij dat dit apparaat voldoet aan de
essentiële vereisten en andere relevante bepalingen van Richtlijn 2014/53/
EU. De volledige tekst van de EU-conformiteitsverklaring is beschikbaar op
https://www.asus.com/support/
De WiFi op 5150-5350MHz zal beperkt zijn tot binnengebruik voor in de tabel
vermelde landen:
Lihtsustatud EÜ vastavusdeklaratsioon
Käesolevaga kinnitab ASUSTek Computer Inc, et seade vastab direktiivi
2014/53/EÜ olulistele nõuetele ja teistele asjakohastele sätetele. EL
vastavusdeklaratsiooni täistekst on saadaval veebisaidil
https://www.asus.com/support/
Sagedusvahemikus 5150-5350 MHz töötava WiFi kasutamine on järgmistes
riikides lubatud ainult siseruumides:
Eurooppa - EY:n vaatimustenmukaisuusvakuutus
ASUSTek Computer Inc. ilmoittaa täten, että tämä laite on direktiivin 2014/53/
EU olennaisten vaatimusten ja muiden asiaankuuluvien lisäysten mukainen.
Koko EY:n vaatimustenmukaisuusvakuutuksen teksti on luettavissa
osoitteessa https://www.asus.com/support/
5 150 - 5 350 MHz:in taajuudella toimiva WiFi on rajoitettu sisäkäyttöön
taulukossa luetelluissa maissa:
‫تبعیت از نسخه ساده شده بیانیه اتحادیه اروپا‬
‫ در اینجا اعالم می کند که این دستگاه با نیازهای اساسی و سایر‬ASUSTek Computer Inc
‫ متن کامل پیروی از این بیانیه اتحادیه‬.‫ مطابقت دارد‬.2014/53/EU ‫مقررات مربوط به بیانیه‬
:‫اروپا در این آدرس موجود است‬
.https://www.asus.com/support/
‫ باید برای استفاده در فضای داخل ساختمان برای‬WiFi ‫ مگاهرتز برای‬5150-5350 ‫عملکرد‬
.‫ محدود شود‬،‫کشورهای فهرست شده در جدول‬
Απλοποιημένη Δήλωση Συμμόρφωσης ΕΕ
Διά του παρόντος η ASUSTek Computer Inc. δηλώνει ότι αυτή η συσκευή
είναι σύμμορφη με τις βασικές προϋποθέσεις και άλλες σχετικές διατάξεις της
Οδηγίας 2014/53/ΕE. Το πλήρες κείμενο της δήλωσης συμμόρφωσης της ΕΕ
είναι διαθέσιμο στη διεύθυνση https://www.asus.com/support/
Το WiFi που λειτουργεί στη ζώνη 5150-5350MHz περιορίζεται για χρήση σε
εσωτερικούς χώρους για τις χώρες που αναφέρονται στον παρακάτω πίνακα:
‫הצהרת תאימות רגולטורית מקוצרת עבור האיחוד אירופי‬
‫ מצהירה בזאת כי מכשיר זה תואם לדרישות‬ASUSTek Computer Inc.‎
‫ ניתן לקרוא את‬.‎2014/53/EU ‫החיוניות ולשאר הסעיפים הרלוונטיים של תקנה‬
:‫הנוסח המלא של הצהרת התאימות הרגולטורית עבור האיחוד האירופי בכתובת‬
https://www.asus.com/support/‎
‫ לשימוש‬‎5150-5350MHz ‫ הפועלות ברצועת התדרים‬Wi-Fi ‫יש להגביל רשתות‬
Appendix
Simplified EU Declaration of Conformity
ASUSTek Computer Inc. hereby declares that this device is in compliance
with the essential requirements and other relevant provisions of Directive
2014/53/EU. Full text of EU declaration of conformity is available at
https://www.asus.com/support/
The WiFi operating in the band 5150-5350MHz shall be restricted to indoor
use for countries listed in the table below:
Déclaration simplifiée de conformité de l’UE
ASUSTek Computer Inc. déclare par la présente que cet appareil est conforme
aux critères essentiels et autres clauses pertinentes de la directive 2014/53/
EU. La déclaration de conformité de l’UE peut être téléchargée à partir du site
internet suivant : https://www.asus.com/support/
Dans la plage de fréquence 5150-5350 MHz, le Wi-Fi est restreint à une
utilisation en intérieur dans les pays listés dans le tableau ci-dessous:
Vereinfachte EU-Konformitätserklärung
ASUSTek COMPUTER INC erklärt hiermit, dass dieses Gerät mit den
grundlegenden Anforderungen und anderen relevanten Bestimmungen
der Richtlinie 2014/53/EU übereinstimmt. Der gesamte Text der EUKonformitätserklärung ist verfügbar unter: https://www.asus.com/support/
Der WLAN-Betrieb im Band von 5150-5350 MHz ist für die in der unteren
Tabelle aufgeführten Länder auf den Innenbereich beschränkt:
Dichiarazione di conformità UE semplificata
ASUSTek Computer Inc. con la presente dichiara che questo dispositivo è
conforme ai requisiti essenziali e alle altre disposizioni pertinenti con la
direttiva 2014/53/EU. Il testo completo della dichiarazione di conformità UE è
disponibile all’indirizzo: https://www.asus.com/support/
L’utilizzo della rete Wi-Fi con frequenza compresa nell’intervallo 51505350MHz deve essere limitato all’interno degli edifici per i paesi presenti
nella seguente tabella:
Упрощенное заявление о соответствии европейской директиве
ASUSTek Computer Inc. заявляет, что устройство соответствует основным
требованиям и другим соответствующим условиям директивы 2014/53/EU.
Полный текст декларации соответствия ЕС доступен на
https://www.asus.com/support/
Работа WiFi в диапазоне частот 5150-5350 должна быть ограничена
использованием в помещениях для стран, перечисленных в таблице ниже:
‫إعالن التوافق المبسط الصادر عن االتحاد األوروبي‬
‫ أن هذا الجهاز يتوافق مع المتطلبات األساسية واألحكام‬ASUSTek Computer ‫تقر شركة‬
‫ يتوفر النص الكامل إلعالن التوافق‬.2014/53/EU ‫األخرى ذات الصلة الخاصة بتوجيه‬
:‫الصادر عن االتحاد األوروبي على‬
https://www.asus.com/support/
‫ ميجا هرتز على االستخدام المنزلي للبلدان‬5150-5350 ‫ العاملة بـ‬WiFi ‫يجب حصر استخدام‬
.‫المدرجة بالجدول‬
Опростена декларация за съответствие на ЕС
С настоящото ASUSTek Computer Inc. декларира, че това устройство е
в съответствие със съществените изисквания и другите приложими
постановления на свързаната Директива 2014/53/EC. Пълният текст на ЕС
декларация за съвместимост е достъпен на адрес
https://www.asus.com/support/
WiFi, работеща в диапазон 5150-5350MHz, трябва да се ограничи до
употреба на закрито за страните, посочени в таблицата по-долу:
Declaração de Conformidade UE Simplificada
ASUSTek Computer Inc. declara que este dispositivo está em conformidade
com os requisitos essenciais e outras disposições relevantes relacionadas às
diretivas 2014/53/UE. O texto completo da declaração de conformidade CE
está disponível em https://www.asus.com/support/
O WiFi operando na banda 5150-5350MHz deve ser restrito para uso interno
para os países listados na tabela abaixo:
Pojednostavljena EU Izjava o sukladnosti
ASUSTeK Computer Inc. ovim izjavljuje da je ovaj uređaj sukladan s bitnim
zahtjevima i ostalim odgovarajućim odredbama direktive 2014/53/EU. Cijeli
tekst EU izjave o sukladnosti dostupan je na https://www.asus.com/support/
WiFi koji radi na opsegu frekvencija 5150-5350 MHz bit će ograničen na
upotrebu u zatvorenom prostoru u zemljama na donjem popisu:
Zjednodušené prohlášení o shodě EU
Společnost ASUSTek Computer Inc. tímto prohlašuje, že toto zařízení splňuje
základní požadavky a další příslušná ustanovení směrnice 2014/53/ EU. Plné
znění prohlášení o shodě EU je k dispozici na adrese
https://www.asus.com/support/
V zemích uvedených v tabulce je provoz sítě Wi-Fi ve frekvenčním rozsahu 5
150 - 5 350 MHz povolen pouze ve vnitřních prostorech:
:‫בתוך מבנים סגורים בארצות המפורטות ברשימה הבאה‬
Egyszerűsített EU megfelelőségi nyilatkozat
Az ASUSTek Computer Inc. ezennel kijelenti, hogy ez az eszköz megfelel az
2014/53/EU sz. irányelv alapvető követelményeinek és egyéb vonatkozó
rendelkezéseinek. Az EU megfelelőségi nyilatkozat teljes szövegét a
következő weboldalon tekintheti meg: https://www.asus.com/support/
Az 5150-5350 MHz-es sávban működő Wi-Fi-t beltéri használatra kell
korlátozni az alábbi táblázatban felsorolt országokban:
Pernyataan Kesesuaian UE yang Disederhanakan
ASUSTeK Computer Inc. dengan ini menyatakan bahwa perangkat ini
memenuhi persyaratan utama dan ketentuan relevan lainnya yang terdapat
pada Petunjuk 2014/53/EU. Teks lengkap pernyataan kesesuaian EU tersedia
di: https://www.asus.com/support/
WiFi yang Beroperasi pada 5150-5350 MHz akan terbatas untuk penggunaan
dalam ruangan di negara yang tercantum dalam tabel
Vienkāršota ES atbilstības paziņojums
ASUSTeK Computer Inc. ar šo paziņo, ka šī ierīce atbilst Direktīvas
2014/53/ES būtiskajām prasībām un citiem citiem saistošajiem nosacījumiem.
Pilns ES atbilstības paziņojuma teksts pieejams šeit:
https://www.asus.com/support/
Wi-Fi darbība 5150–5350 MHz ir jāierobežo lietošanai telpās valstīs, kuras
norādītas tālāk.
A-5
Appendix
Supaprastinta ES atitikties deklaracija
Šiame dokumente bendrovė „ASUSTek Computer Inc.“ pareiškia, kad šis
prietaisas atitinka pagrindinius reikalavimus ir kitas susijusias Direktyvos
2014/53/ES nuostatas. Visas ES atitikties deklaracijos tekstas pateikiamas čia:
https://www.asus.com/support/
Toliau nurodytose šalyse „WiFi“ ryšiu, veikiančiu 5 150–5 350 MHz dažnio
juostoje, galima naudotis tik patalpose:
Ovaj uređaj može da se koristi u državama navedenim ispod:
Forenklet EU-samsvarserklæring
ASUSTek Computer Inc. erklærer herved at denne enheten er i samsvar med
hovedsaklige krav og andre relevante forskrifter i direktivet 2014/53/EU.
Fullstendig tekst for EU-samsvarserklæringen finnes på:
https://www.asus.com/support/
Wi-Fi-området 5150–5350 MHz skal begrenses til innendørs bruk for landene
som er oppført i tabellen:
Uproszczona deklaracja zgodności UE
Firma ASUSTek Computer Inc. niniejszym oświadcza, że urządzenie to jest
zgodne z zasadniczymi wymogami i innymi właściwymi postanowieniami
dyrektywy 2014/53/EU. Pełny tekst deklaracji zgodności UE jest dostępny pod
adresem https://www.asus.com/support/
W krajach wymienionych w tabeli działanie sieci Wi-Fi w paśmie 5150–
5350 MHz powinno być ograniczone wyłącznie do pomieszczeń:
Declaração de Conformidade Simplificada da UE
A ASUSTek Computer Inc. declara que este dispositivo está em conformidade
com os requisitos essenciais e outras disposições relevantes da Diretiva
2014/53/UE. O texto integral da declaração de conformidade da UE está
disponível em https://www.asus.com/support/
A utilização das frequências WiFi de 5150 a 5350MHz está restrita a
ambientes interiores nos países apresentados na tabela:
Declarație de conformitate UE, versiune simplificată
Prin prezenta, ASUSTek Computer Inc. declară că acest dispozitiv este în
conformitate cu reglementările esențiale și cu celelalte prevederi relevante
ale Directivei 2014/53/UE. Textul complet al declarației de conformitate UE
este disponibil la adresa https://www.asus.com/support/
Pentru ţările listate în tabelul de mai jos, reţelele WiFi care funcţionează în
banda de frecvenţă de 5.150-5.350 MHz trebuie utilizate doar în interior:
Pojednostavljena Deklaracija o usaglašenosti EU
ASUSTek Computer Inc. ovim izjavljuje da je ovaj uređaj usaglašen sa
osnovnim zahtevima i drugim relevantnim odredbama Direktive 2014/53/EU.
Ceo tekst Deklaracije o usaglašenosti EU dostupan je na lokaciji
https://www.asus.com/support/
WiFi koji radi u frekventnom opsegu od 5150 MHz do 5350 MHz ograničen
je isključivo na upotrebu u zatvorenom prostoru za zemlje navedene u
tabeli ispod:
Zjednodušené vyhlásenie o zhode platné pre EÚ
Spoločnosť ASUSTek Computer Inc. týmto vyhlasuje, že toto zariadenie je
v súlade so základnými požiadavkami a ďalšími príslušnými ustanoveniami
smernice č. 2014/53/EÚ. Plné znenie vyhlásenia o zhode pre EÚ je k dispozícii
na lokalite https://www.asus.com/support/
Činnosť WiFi v pásme 5150 - 5350 MHz bude obmedzená na použitie vo
vnútornom prostredí pre krajiny uvedené v tabuľke nižšie:
Poenostavljena izjava EU o skladnosti
ASUSTek Computer Inc. tukaj izjavlja, da je ta naprava skladna s temeljnimi
zahtevami in drugimi relevantnimii določili Direktive 2014/53/EU. Polno
besedilo izjave EU o skladnosti je na voljo na https://www.asus.com/support/
WiFi, ki deluje v pasovnem območju 5150–5350 MHz, mora biti v državah,
navedenih v spodnjem seznamu, omejen na notranjo uporabo:
Declaración de conformidad simplificada para la UE
Por la presente, ASUSTek Computer Inc. declara que este dispositivo cumple
los requisitos básicos y otras disposiciones pertinentes de la directiva
2014/53/EU. En https://www.asus.com/support/ está disponible el texto
completo de la declaración de conformidad para la UE.
La conexión WiFi con una frecuencia de funcionamiento de 5150-5350 MHz
se restringirá al uso en interiores para los países enumerados en la tabla:
Förenklad EU-försäkran om överensstämmelse
ASUSTek Computer Inc. deklarerar härmed att denna enhet överensstämmer
med de grundläggande kraven och andra relevanta bestämmelser i direktiv
2014/53/EU. Fullständig text av EU-försäkran om överensstämmelse finns på
https://www.asus.com/support/
WiFi som använder 5150-5350 MHz kommer att begränsas för användning
inomhus i de länder som anges i tabellen:
A-6
ประกาศเกี่ยวกับความสอดคล้องของสหภาพยุโรปแบบย่อ
ASUSTek Computer Inc.
ขอประกาศในที่นี้ว่าอุปกรณ์นี้มีความสอดคล้องกับความ
ต้องการที่จำ�เป็นและเงื่อนไขที่เกี่ยวข้องอื่น ๆ ของบทบัญญัติข้อกำ�หนด
2014/53/EU เนื้อหาที่สมบูรณ์ของประกาศความสอดคล้องกับ EU มีอยู่ที่
https://www.asus.com/support/
การทำ�งานของ WiFi ที่ 5150-5350MHz
ถูกจำ�กัดให้ใช้ในอาคารสำ�หรับประเทศที่แสดงในตาราง
Basitleştirilmiş AB Uyumluluk Bildirimi
ASUSTek Computer Inc., bu aygıtın 2014/53/EU Yönergesinin temel
gereksinimlerine ve diğer ilgili hükümlerine uygun olduğunu bildirir. AB
uygunluk bildiriminin tam metni şu adreste bulunabilir:
https://www.asus.com/support/
5150-5350 MHz arasındaki WiFi çalışması, tabloda listelenen ülkeler için iç
mekân kullanımıyla kısıtlanacaktır.
Спрощена декларація про відповідність нормам ЄС
ASUSTek Computer Inc. заявляє, що цей пристрій відповідає основним
вимогам та іншим відповідним вимогам Директиви 2014 / 53 / EU.
Повний текст декларації відповідності нормам ЄС доступний на
https://www.asus.com/support/
Робота Wi-Fi на частоті 5150-5350 МГц обмежується використанням у
приміщенні для країн, поданих у таблиці нижче:
AT
BE
BG
CZ
DK
EE
FR
DE
IS
IE
IT
EL
ES
CY
LV
LI
LT
LU
HU
MT
NL
NO
PL
PT
RO
SI
SK
TR
FI
SE
CH
UK
HR
WCBN808L-AD (Model: RTL8822BE) output power table:
Function
WiFi
Bluetooth
Frequency
Maximum Output Power
(EIRP)
2412-2472 MHz
17 dBm
5150-5350 MHz
21 dBm
5470-5725 MHz
19 dBm
2402-2480 MHz
9 dBm
Appendix
ASUS contact information
ASUSTeK COMPUTER INC.
Technical Support
Telephone Fax
Online support
4F, No. 150, Li-Te Road, Peitou, Taipei 112, Taiwan
+886-2-2894-3447
+886-2-2890-7798
www.asus.com
Appendix
Address
Telephone Fax Web site
+86-21-38429911
+86-21-5866-8722, ext. 9101#
http://qr.asus.com/techserv
ASUS COMPUTER INTERNATIONAL (America)
Address
800 Corporate Way, Fremont, CA 94539, USA
Telephone+1-510-739-3777
Fax
+1-510-608-4555
Web site
http://www.asus.com/us/
Technical Support
Support fax
Telephone Online support
+1-812-284-0883
+1-812-282-2787
http://qr.asus.com/techserv
ASUS COMPUTER GmbH (Germany and Austria)
Address
Fax
Web site
Online contact
Harkort Str. 21-23, 40880 Ratingen, Germany
+49-2102-959931
http://www.asus.com/de
http://eu-rma.asus.com/sales
Technical Support
Telephone+49-2102-5789555
Support Fax
+49-2102-959911
Online support
http://qr.asus.com/techserv
ROG STRIX X370-I GAMING
A-7
DECLARATION OF CONFORMITY
Appendix
Per FCC Part 2 Section 2. 1077(a)
Asus Computer International
Responsible Party Name:
800 Corporate Way, Fremont, CA 94539.
Address:
Phone/Fax No:
(510)739-3777/(510)608-4555
hereby declares that the product
Product Name : Motherboard
Model Number : ROG STRIX X370-I GAMING
Conforms to the following specifications:
FCC Part 15, Subpart B, Unintentional Radiators
Supplementary Information:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Representative Person’s Name :
Steve Chang / President
Signature :
Date :
Sep. 27, 2017
Ver. 170324
A-8
Appendix
Download PDF
Similar pages