Medium Duty Commercial Three Element Electric Water Heaters

Medium Duty Commercial Three Element Electric Water Heaters
Job Name:
Location:
Engineer:
Wholesaler:
Mechanical Contractor:
Notes:
Model Number:
Electrical Specifications:
Electric Water Heater Models
• Ships Wired for Single Phase, Simultaneous Operation
• Example Model Number: EVC080C3W135
• Available in 80, 100, and 115 gallon capacities
• Available in 208, 240, 277, and 480 Volt Models
Construction
• 316L stainless steel tank tolerates high temperatures and offers superior corrosion resistance
• Super-insulated for energy efficiency and minimal heat loss
• Outer jacket features attractive metallic silver appearance
• Water connections on the top of the water heater ease installation
• Top hot water outlet draws the hottest water from the tank
• Top cold water inlet with dip tube directs cold water to the lower heating element,
minimizing the mixing of cold and heated water and providing long draws of hot
water
• 3/4” inlet and outlet nipples constructed of durable brass
• Terminal block eases field wiring connections and installation
Long Life Electric Elements / Thermostat High Limit Control
• Incoloy electric elements reduce the chance of element burnout and provide longer
service life than conventional elements
• Immersed elements allow maximum recovery efficiency and direct, 98% efficient
heat transfer
• Adjustable surface mounted thermostats provide years of reliable, trouble-free
water temperature control
• Fully automatic high limit controls provide overheat protection - manual reset cutoff
Additional Features
• Extended Limited Warranty if registered online - Extends coverage against inner tank
leakage from the date of installation - One (1) year coverage on component parts
• Included ASME rated Temperature and Pressure Relief Valve
• Included Brass Drain Valve
Certifications and Ratings Efficiency
• Low Standby Loss
• ETL Design Certified to meet UL 1453 Standard for Electric Booster and Commercial
Storage Tank Water Heaters
• North Carolina Code compliant models available
• Lead Free compliant per the Safe Drinking Water Act, Section 1417
• Meets or exceeds ANSI requirements and tested according to DOE procedures
• Meets or exceeds the energy efficiency requirements of NAECA, ASHRAE Standard 90,
ICE code, and all state energy performance
criteria
• Exceeds energy efficiency codes of all states,
including California Energy Commission
(CEC)
NOTE: The manufacturer reserves the right to make product changes or updates without notice and will not be held liable for typographical errors in
literature.
whl-652 Rev. 11.1.17
FRONT VIEW
TOP VIEW
Specifications and Dimensions
Storage
Capacity
A
B
C
D
080
80
6 1/2”
60”
69”
23 1/4”
100
100
52”
61”
115
115
60”
69”
Models
7 1/4”
E
27”
F
Water Temperature Ratings
Shipping Weight
(Lbs. Est.)
Hot / Cold Inlets
26”
8”
Min. Delivered
Temp.
Max. Delivered
Temp.
High Temp.
Limit
135oF
(57.2 C)
181oF
(82.8 C)
200oF
(93.3 C)
165
220
3/4” NPT
30”
240
Table 1 - Specifications and Dimensions
Gallons
# Elements
Input Wattage
208
240
12,500
B3W125N
NO
13,500
B3W135N
C3W135N
3
480
NO
NO
E3W135N
NO
D3W140N
NO
C3W150N
D3W150N
E3W150N
NO
D3W160N
NO
16,500
C3W165N
NO
E3W165N
18,000
NO
D3W180N
E3W180N
14,000
80, 100, 115
277
15,000
NO
16,000
Table 2 - Element Kit Part Numbers
Full Load Current In Amperes
Total
Input (Kw)
# of
Elements
Single
Element
Wattage
208V
240V
277V
480V
Phase
Phase
Phase
Phase
1
3
1
3
1
3
1
4.2
60
35
-
-
-
-
-
-
13.5
4.5
65
38
57
33
-
-
29
17
14
4.7
-
-
-
-
51
30
-
-
3
# of
Fuses
# of Fuse
Holders
3
6
2
3
12.5
15
# of
T-Stats
5
-
-
63
36
55
32
32
18
16
5.3
-
-
-
-
58
34
-
-
16.5
5.5
-
-
69
40
-
-
35
20
18
6
-
-
-
-
65
38
38
22
Table 3 - Electrical Specifications
whl-652 Rev. 11.1.17
Input
(Watts)
12500
13000
13500
14000
14500
15000
Input
(BTU/Hr.)
42651
44357
46063
47770
49476
51182
Units
Recovery in U.S. Gallons/Hr. (GPH) and Liters/Hr. (LPH) at Various Temperature Rises
Deg. F
20
30
40
50
60
70
80
90
100
110
120
130
140
Deg. C
11.1
16.7
22.2
27.8
33.3
38.9
44.4
50.0
55.6
61.1
66.7
72.2
77.8
GPH
258
172
129
103
86
74
65
57
52
47
43
40
37
LPH
978
652
489
391
326
279
244
217
196
178
163
150
140
GPH
269
179
134
107
90
77
67
60
54
49
45
41
38
LPH
1017
678
508
407
339
290
254
226
203
185
169
156
145
GPH
279
186
139
112
93
80
70
62
56
51
46
43
40
LPH
1056
704
528
422
352
302
264
235
211
192
176
162
151
GPH
289
193
145
116
96
83
72
64
58
53
48
45
41
LPH
1095
730
547
438
365
313
274
243
219
199
182
168
156
GPH
300
200
150
120
100
86
75
67
60
54
50
46
43
LPH
1134
756
567
454
378
324
284
252
227
206
189
174
162
GPH
310
207
155
124
103
89
77
69
62
56
52
48
44
LPH
1173
782
587
469
391
335
293
261
235
213
196
180
168
GPH
320
213
160
128
107
91
80
71
64
58
53
49
46
LPH
1212
808
606
485
404
346
303
269
242
220
202
187
173
GPH
331
220
165
132
110
94
83
73
66
60
55
51
47
LPH
1251
834
626
501
417
358
313
278
250
228
209
193
179
GPH
341
227
170
136
114
97
85
76
68
62
57
52
49
LPH
1290
860
645
516
430
369
323
287
258
235
215
199
184
GPH
351
234
176
140
117
100
88
78
70
64
59
54
50
LPH
1330
886
665
532
443
380
332
295
266
242
222
205
190
GPH
362
241
181
145
121
103
90
80
72
66
60
56
52
LPH
1369
912
684
547
456
391
342
304
274
249
228
211
196
GPH
372
248
186
149
124
106
93
83
74
68
62
57
53
LPH
1408
Table 4 - Recovery Rates / Capacities
939
704
563
469
402
352
313
282
256
235
217
201
15500
52888
16000
54594
16500
56300
17000
58006
17500
59712
18000
61418
Typical Specifications
The water heater shall be an Westinghouse model #
with a
gallon storage capacity, an input of
a recovery rate of
GPH at 100oF (56oC) temperature rise and be equipped for 240 volts, single phase, simultaneous operation.
kw (BTU),
The tank shall be constructed of 316L stainless steel, have a working pressure of 150 PSI (1,034 kPA) and test pressure of 300 PSI. The water heater shall be
design certified by ETL to meet the UL 1453 Standard for Electric Booster and Commercial Storage Tank Water Heaters. These water heaters shall be supplied
with ¾” NPT brass inlet and outlet connections with built-in heat traps and a full port brass drain valve.
The water heater shall be equipped with an adjustable surface mounted thermostat with manual reset high limit safety control, and a terminal block for field
wire connections. All water heaters will be shipped with an ASME Rated temperature and pressure relief valve.
Water heaters shall be covered by an extended limited warranty against inner tank leakage when registered online with HTP. See product warranty for details.
The surfaces of these products contacted by consumable water contain less than 0.25% lead by weight, as required by the Safe Drinking Water Act, Section
1417.
Maximum unit dimensions shall be length
weight shall be
pounds.
inches, width
inches and height
inches. Approximate unit shipping
whl-652 Rev. 11.1.17
Download PDF
Similar pages