Wireless made SIMPLE!
BenQ makes presenting wireless a SNAP!
This USB wireless dongle replaces cables and wires giving
you the liberty to present wirelessly. Just plug in the USB
Wireless Dongle to the back of a BenQ projector* and you
can begin presenting!
*BenQ Projector with USB Display or LAN Display Function
Use BenQ QPresenter to
connect and transfer content
via local network connection.
QPresenter Highlights
•
•
•
•
•
Automatic search
Automatic connect
Full Screen option
Share portion of the screen
4 computers - Quad view
Windows PC
Wireless Dongle
Part Number
5J.J0614.A21
Wireless Standard
IEEE 802.11 b/g/n standards
Compliant
Interface
USB 2.0
Speed
Up to 54 Mbps
Wireless Frequency Range
2.412 GHz ~ 2.462 GHz
Security
PC System Requirement
WEP16/32
Windows 2000/XP/Vista/Win7
CPU: Pentium 1G
RAM: 512MB RAM
20MB Hard Disk Space
Windows 7 Tablet
Wireless Dongle
BenQ Projector
BenQ America Corp.
15375 Barranca Parkway. Suite A-205. Irvine, CA 92618
Education Deal Registration – http://promotions.benq.us/education/
B2B Deal Registration - http://promotions.benq.us/dealregistration/
Tel: (949) 255-9500
WirelessDongle 09-24-12-BQus
www.BenQ.us
Which BenQ projector models are compatible?
• LX60ST / LW61ST / SH910
• MX763 / MX764 / MX760 / MX761 / MX750 / MX711 / MX710
• MP780ST / MP780ST+ / MW860USTi
• MX810ST / MW811ST / MX812ST / MX880UST
• MS612ST / MX613ST / MS614 / MX615 / MX660 / MX660P
Package includes:
• 1 x 802.11b/g/n Mini Wireless LAN USB2.0 Adapter
• 1 x Quick start guide
How to use it:
1. Connect the wireless LAN USB adapter to the USB TYPE-A input jack of the projector.
2. Make sure the projector is turned on.
3. From the OSD menu, go to SYSTEM SETUP: Advanced > Network Settings > Wireless
LAN, and press MODE/ENTER.
4. Make sure the Status is Connect.
5. Make sure the SSID information is displayed.
6. Highlight Connection Mode and press / to select AP or Infrastructure. In AP mode,
you need to use your computer’s wireless connection utility to search the projector’s
SSID and connect to it. To use Infrastructure mode, you should connect both your
computer and projector to the same AP router and make connections with the IP
address.
7. Enter the IP address for the projector in the bottom of the network screen in the
address bar of your browser and press Enter.
8. Download and install Q Presenter on your computer. Use the software to transfer the
desktop content to the network projector via local network connection.
For details, please refer to the projector’s user manual.
Download PDF
Similar pages