ac/dc/ir/gb electrical safety tester basic t &

AC/DC/IR/GB ELECTRICAL SAFETY TESTER
GPI-745A Rear Panel
GPI-735A
Patent No : 074646
SPECIFICATIONS
ORDERING INFORMATION
AC HI-POT
Voltage Range
Voltage Resolution
Voltage Regulation
(Line and Load)
Voltage Accuracy
Max. Current Sourcing
GPI-745A
Patent No:074646
BASIC T & M INSTRUMENTS
FEATURES
E23
* 200VA AC Test Capacity
* AC/DC Withstanding Voltage Test & Insulation
Resistance Test
* True RMS Cut-Off Current Measurement
* Arc Detection
* Zero Crossing Turn-On Operation Switch
* Linear Amplifier with Feedback Control to
Provide High Regulated Voltage Output
* Controllable Ramp-Up Time
* Output Voltage and Current Limit Could be set
Without HV Output
* Output Voltage Adjustable During Test Period
* 9 pins Remote Control for Start, Reset and
Test Result Output
* Automatic FAIL Indicator of Alarm Lamp and
Buzzer
* Scanner Box for Automatic Test (Option)
* 42A Ground Bond Test (GPI-745A only)
(1% rdg 10V)
30mA ~ 40mA (above 500V, maximum test time:180sec.)
0.10mA ~ 29.99mA (above 500V, continuous test)
0.10mA ~ 10mA (below 500V, continuous test)
Current Limit
0.10 ~ 40mA, 0.02mA/step
Current Accuracy
(1% rdg 80 A)
DC HI-POT (GPT-715A/GPI-735A/GPI-745A)
Voltage Range
Voltage Resolution-Output
Voltage Regulation
(Line and Load)
Voltage Accuracy
Max. Current Sourcing
For: GPT/GPI-700A Series
GPT/GPI-800 Series
0.100kV ~ 6.000kV
5V/step
1% + 5 V
DC Voltage
Resistance Range
Resistance Accuracy
(50V/100V)
Resistance Accuracy
(500V/1000V)
AC 200VA AC/DC Withstanding Voltage/Insulation/Ground Bound Electrical Safety Tester
AC 200VA AC/DC Withstanding Voltage / Insulation Electrical Safety Tester
AC 200VA AC Withstanding Voltage / Insulation Electrical Safety Tester
AC 200VA AC/DC Withstanding Voltage Electrical Safety Tester
AC 200VA AC Withstanding Voltage Electrical Safety Tester
OPTION
Clip High Voltage Probe
High Voltage Wiring Cable for HSB-001-1/HSB-001-2
Ground Bond Wiring Cable for HSB-001-1
Communication Cable for HSB-001-1/HSB-001-2
High Voltage Test Pistol
FUNCTION
MODEL
Groups : 10, steps per group : 16
INTERFACE
Remote I/O
Standard
RS-232C
Standard
Standard
Scan
Option
GPIB
Standard (only GPI-745A)
Real Panel Output
POWER SOURCE
AC100V/120V/220V/230V 10% , 50/60Hz
DIMENSIONS & WEIGHT
330(W) x 149(H) x 446(D) mm, Approx. 14kg
DC
IR
GB
GPT-715A
GPI-725A
GPI-745A
40 level (1 ~ 40mA)
AC
GPT-705A
GPI-735A
000.0 ~ 999.9 seconds/000.5 ~ 999.9 seconds
000.0 ~ 999.9 seconds/000.5 ~ 999.9 seconds
001.0 ~ 999.9 seconds
000.5 ~ 999.9 seconds
000.5 ~ 999.9 seconds
For : GPT/GPI-800 Series, GPT/GPI-700A Series
SELECTION GUIDE
Voltage Range
Current Range
Current Resolution
Current Accuracy
RAMP TIME & TEST TIME
AC Hi-Pot Ramp/Test Time
DC Hi-Pot Ramp/Test Time
Insulation Resistance Test Time
Ground Bond Test Time
Continuity Check Test Time
ARC DETECT
Detect Current
MEMORY
GRA-402 Rack Adapter Panel (19",4U)
GRA-406 Rack Adapter Panel (19",3U) for
HSB-001-1/HSB-001-2
GTL-232 RS232C Cable, 9-pin Female to
9-pin, null Modem for Computer
* Housing made of unbreakable plastic
* Operation voltage 10kVDC/8kVAC max.
* Connecting via highly flexible safety cable
* Power supply line approx. 2m
* Wear-resistant tungsten test probe tip
* Teflon sleeve for resistance to burning
NOTE : GPT/GPI-7 x 5A Series can control only one scanner box.
GROUND BOND (GPI-745A )
0.1A (DC)
10%
0.1 @ 1
Opt.04 HSB-001-1 Scanner Box, 8CH HV and 8CH GB
(suitable GPI-745A)
Opt.01 GPIB Interface (Factory Installed)
Opt.05 HSB-001-2 Scanner Box, 16CH HV
GHT-107A
GHT-108
GHT-109
GHT-110
GHT-113
50V/100V/500V/1000V
1~9900M (500V, 1000V); 1~2000M (50V, 100V)
1M ~50M : (5% rdg 1count)
51M ~200M : (10% rdg 1count)
201M ~2000M : (20% rdg 1count)
1M ~500M : (5% rdg 1count)
501M ~2000M : (10% rdg 1count)
2001M ~9500M : (20% rdg 1count)
Max. 8V (DC)
3~42A
0.02A
1% of reading 0.2A (3A~8A); 1% of reading
0~600m
Ground Bond Resistance Test
0.1m
Resistance Resolution
Resistance Accuracy
(1% of reading 3m )
Test Method
Four terminal test mode
CONTINUITY CHECK (GPT-705A/715A & GPI-725A/735A)
GHT-113 High Voltage Test Pistol
ACCESSORIES :
User manual x 1 , Power cord x 1
GHT-205 x 1 for GPT-705A/GPT-715A/GPI-725A/GPI-735A ; GHT-205 x 1, GTL-115 x 1 for GPI-745A
OPTIONAL ACCESSORIES
(1% rdg 10V)(above 500V)
0.10mA ~ 10.00mA (above 500V, continuous test)
0.10mA ~ 2mA (below 500V, continuous test)
Current Limit
0.10mA ~ 10mA, 0.01mA/step
Current Accuracy
(1% rdg 50 A)
INSULATION RESISTANCE (GPI-725A/GPI-735A/GPI-745A )
Output Current Range
Compliance Voltage Range
Resolution
GHT-205 High Voltage Test Probe
0.100kV ~ 5.000kV
5V/step
1% + 5 V
GPI-745A
GPI-735A
GPI-725A
GPT-715A
GPT-705A
50mA (9A~42A)
GHT-107A Clip High Voltage Probe
SCANNER BOX
For : GPT/GPI-800 Series, GPT/GPI-700A Series
BASIC T & M INSTRUMENTS
GPT-705A/715A & GPI-725A/735A
GPI-735A Rear Panel
The GPT/GPI-700A Series are universal Safety Testers, compliant to all major safety standards such as
UL, CSA, JIS, and BS. The Interface has been carefully designed to be user-friendly and fully automatic,
ensuring safety and producing reliable test results. The advanced and versatile GPT/GPI-700A Series
can be used in production lines, workshops, laboratories, and test sites. Users can select from 5 models
according to their testing requirements: starting from the simple GPT-705A for AC Withstanding; the
GPT-715A for AC Withstanding + DC Withstanding; the GPI-725A for AC Withstanding + Insulation
Resistance; the GPI-735A for AC Withstanding + DC Withstanding + Insulation Resistance; through to
the most advanced model, the GPI-745A for AC Withstanding + DC Withstanding + Insulation
Resistance + Ground Bond testing. Each model has remote control, supports programming and has a
plethora of options delivering fast and reliable test results.
HSB-001-1
8CH High Voltage + 8CH GB
For: GPI-745A
HSB-001-2
16CH High Voltage
For: GPT/GPI-700A Series
Can be installed into rack by
adding two option handles.
(Rear Panel)
( Front Panel)
GHT-108
High Voltage Wiring Cable
GHT-109
Ground Bond Wiring Cable
For : HSB-001-1, HSB-001-2
For : HSB-001-1
GRA-406 Rack Adapter Panel
For : HSB-001-1, HSB-001-2
Rack Mounting (19",3U)
Made to Measure.
Good Will Instrument Co., Ltd.
E24
AC/DC/IR/GB ELECTRICAL SAFETY TESTER
GPI-745A Rear Panel
GPI-735A
Patent No : 074646
SPECIFICATIONS
ORDERING INFORMATION
AC HI-POT
Voltage Range
Voltage Resolution
Voltage Regulation
(Line and Load)
Voltage Accuracy
Max. Current Sourcing
GPI-745A
Patent No:074646
BASIC T & M INSTRUMENTS
FEATURES
E23
* 200VA AC Test Capacity
* AC/DC Withstanding Voltage Test & Insulation
Resistance Test
* True RMS Cut-Off Current Measurement
* Arc Detection
* Zero Crossing Turn-On Operation Switch
* Linear Amplifier with Feedback Control to
Provide High Regulated Voltage Output
* Controllable Ramp-Up Time
* Output Voltage and Current Limit Could be set
Without HV Output
* Output Voltage Adjustable During Test Period
* 9 pins Remote Control for Start, Reset and
Test Result Output
* Automatic FAIL Indicator of Alarm Lamp and
Buzzer
* Scanner Box for Automatic Test (Option)
* 42A Ground Bond Test (GPI-745A only)
(1% rdg 10V)
30mA ~ 40mA (above 500V, maximum test time:180sec.)
0.10mA ~ 29.99mA (above 500V, continuous test)
0.10mA ~ 10mA (below 500V, continuous test)
Current Limit
0.10 ~ 40mA, 0.02mA/step
Current Accuracy
(1% rdg 80 A)
DC HI-POT (GPT-715A/GPI-735A/GPI-745A)
Voltage Range
Voltage Resolution-Output
Voltage Regulation
(Line and Load)
Voltage Accuracy
Max. Current Sourcing
For: GPT/GPI-700A Series
GPT/GPI-800 Series
0.100kV ~ 6.000kV
5V/step
1% + 5 V
DC Voltage
Resistance Range
Resistance Accuracy
(50V/100V)
Resistance Accuracy
(500V/1000V)
AC 200VA AC/DC Withstanding Voltage/Insulation/Ground Bound Electrical Safety Tester
AC 200VA AC/DC Withstanding Voltage / Insulation Electrical Safety Tester
AC 200VA AC Withstanding Voltage / Insulation Electrical Safety Tester
AC 200VA AC/DC Withstanding Voltage Electrical Safety Tester
AC 200VA AC Withstanding Voltage Electrical Safety Tester
OPTION
Clip High Voltage Probe
High Voltage Wiring Cable for HSB-001-1/HSB-001-2
Ground Bond Wiring Cable for HSB-001-1
Communication Cable for HSB-001-1/HSB-001-2
High Voltage Test Pistol
FUNCTION
MODEL
Groups : 10, steps per group : 16
INTERFACE
Remote I/O
Standard
RS-232C
Standard
Standard
Scan
Option
GPIB
Standard (only GPI-745A)
Real Panel Output
POWER SOURCE
AC100V/120V/220V/230V 10% , 50/60Hz
DIMENSIONS & WEIGHT
330(W) x 149(H) x 446(D) mm, Approx. 14kg
DC
IR
GB
GPT-715A
GPI-725A
GPI-745A
40 level (1 ~ 40mA)
AC
GPT-705A
GPI-735A
000.0 ~ 999.9 seconds/000.5 ~ 999.9 seconds
000.0 ~ 999.9 seconds/000.5 ~ 999.9 seconds
001.0 ~ 999.9 seconds
000.5 ~ 999.9 seconds
000.5 ~ 999.9 seconds
For : GPT/GPI-800 Series, GPT/GPI-700A Series
SELECTION GUIDE
Voltage Range
Current Range
Current Resolution
Current Accuracy
RAMP TIME & TEST TIME
AC Hi-Pot Ramp/Test Time
DC Hi-Pot Ramp/Test Time
Insulation Resistance Test Time
Ground Bond Test Time
Continuity Check Test Time
ARC DETECT
Detect Current
MEMORY
GRA-402 Rack Adapter Panel (19",4U)
GRA-406 Rack Adapter Panel (19",3U) for
HSB-001-1/HSB-001-2
GTL-232 RS232C Cable, 9-pin Female to
9-pin, null Modem for Computer
* Housing made of unbreakable plastic
* Operation voltage 10kVDC/8kVAC max.
* Connecting via highly flexible safety cable
* Power supply line approx. 2m
* Wear-resistant tungsten test probe tip
* Teflon sleeve for resistance to burning
NOTE : GPT/GPI-7 x 5A Series can control only one scanner box.
GROUND BOND (GPI-745A )
0.1A (DC)
10%
0.1 @ 1
Opt.04 HSB-001-1 Scanner Box, 8CH HV and 8CH GB
(suitable GPI-745A)
Opt.01 GPIB Interface (Factory Installed)
Opt.05 HSB-001-2 Scanner Box, 16CH HV
GHT-107A
GHT-108
GHT-109
GHT-110
GHT-113
50V/100V/500V/1000V
1~9900M (500V, 1000V); 1~2000M (50V, 100V)
1M ~50M : (5% rdg 1count)
51M ~200M : (10% rdg 1count)
201M ~2000M : (20% rdg 1count)
1M ~500M : (5% rdg 1count)
501M ~2000M : (10% rdg 1count)
2001M ~9500M : (20% rdg 1count)
Max. 8V (DC)
3~42A
0.02A
1% of reading 0.2A (3A~8A); 1% of reading
0~600m
Ground Bond Resistance Test
0.1m
Resistance Resolution
Resistance Accuracy
(1% of reading 3m )
Test Method
Four terminal test mode
CONTINUITY CHECK (GPT-705A/715A & GPI-725A/735A)
GHT-113 High Voltage Test Pistol
ACCESSORIES :
User manual x 1 , Power cord x 1
GHT-205 x 1 for GPT-705A/GPT-715A/GPI-725A/GPI-735A ; GHT-205 x 1, GTL-115 x 1 for GPI-745A
OPTIONAL ACCESSORIES
(1% rdg 10V)(above 500V)
0.10mA ~ 10.00mA (above 500V, continuous test)
0.10mA ~ 2mA (below 500V, continuous test)
Current Limit
0.10mA ~ 10mA, 0.01mA/step
Current Accuracy
(1% rdg 50 A)
INSULATION RESISTANCE (GPI-725A/GPI-735A/GPI-745A )
Output Current Range
Compliance Voltage Range
Resolution
GHT-205 High Voltage Test Probe
0.100kV ~ 5.000kV
5V/step
1% + 5 V
GPI-745A
GPI-735A
GPI-725A
GPT-715A
GPT-705A
50mA (9A~42A)
GHT-107A Clip High Voltage Probe
SCANNER BOX
For : GPT/GPI-800 Series, GPT/GPI-700A Series
BASIC T & M INSTRUMENTS
GPT-705A/715A & GPI-725A/735A
GPI-735A Rear Panel
The GPT/GPI-700A Series are universal Safety Testers, compliant to all major safety standards such as
UL, CSA, JIS, and BS. The Interface has been carefully designed to be user-friendly and fully automatic,
ensuring safety and producing reliable test results. The advanced and versatile GPT/GPI-700A Series
can be used in production lines, workshops, laboratories, and test sites. Users can select from 5 models
according to their testing requirements: starting from the simple GPT-705A for AC Withstanding; the
GPT-715A for AC Withstanding + DC Withstanding; the GPI-725A for AC Withstanding + Insulation
Resistance; the GPI-735A for AC Withstanding + DC Withstanding + Insulation Resistance; through to
the most advanced model, the GPI-745A for AC Withstanding + DC Withstanding + Insulation
Resistance + Ground Bond testing. Each model has remote control, supports programming and has a
plethora of options delivering fast and reliable test results.
HSB-001-1
8CH High Voltage + 8CH GB
For: GPI-745A
HSB-001-2
16CH High Voltage
For: GPT/GPI-700A Series
Can be installed into rack by
adding two option handles.
(Rear Panel)
( Front Panel)
GHT-108
High Voltage Wiring Cable
GHT-109
Ground Bond Wiring Cable
For : HSB-001-1, HSB-001-2
For : HSB-001-1
GRA-406 Rack Adapter Panel
For : HSB-001-1, HSB-001-2
Rack Mounting (19",3U)
Made to Measure.
Good Will Instrument Co., Ltd.
E24
Download PDF
Similar pages