PowerSeries Neo HS2LCD(RF)(P) Keypad

Date: October 2, 2017
To: Global distributors and dealers
PowerSeries Neo
HS2LCD(RF)(P) Keypad
Firmware V1.31
Scope of the Issue
In some cases, it has been found that the buzzer volume of HS2LCD variant keypads may
not be adequate to cover larger areas or be audible to those with some degree of hearing
loss.
Status
We are pleased to announce the release of a new keypad firmware version to address this
limitation. This version includes a change to the frequency of keypad buzzer tones, which
effectively increases their volume to be more easily heard throughout the home or business
where they are installed. The default buzzer tone of the keypads will remain the same as
previous, but customers who would like to have the buzzer more audible can adjust the
buzzer tone by entering the *6 menu and selecting ‘Buzzer Tone’.
This firmware will be available September 28th, 2017 to upgrade existing keypads to V1.31.
Upgrading can be completed using either local or remote firmware capabilities of
PowerSeries Neo and the DLS 5 downloading software.
New production of keypads with v1.31 firmware will begin October 4th.
Affected Part Numbers
Model
HS2LCD
HS2LCDP
HS2LCDRF4
HS2LCDRF8
HS2LCDRF9
HS2LCDRFP4
HS2LCDRFP8
HS2LCDRFP9
HS2ICN
HS2ICNP
HS2ICNRF4
HS2ICNRF8
HS2ICNRF9
HS2ICNRFP4
HS2ICNRFP8
HS2ICNRFP9
Description
PowerSeries Neo LCD Keypad
PowerSeries Neo LCD Keypad with prox
PowerSeries Neo LCD Keypad w/built in 433MHz Transceiver
PowerSeries Neo LCD Keypad w/built in 868 MHz Transceiver
PowerSeries Neo LCD Keypad w/built in 915 MHz Transceiver
PowerSeries Neo LCD Keypad 433 MHz Transceiver and prox
PowerSeries Neo LCD Keypad 868 MHz Transceiver and prox
PowerSeries Neo LCD Keypad 915 MHz Transceiver and prox
PowerSeries Neo ICON Keypad
PowerSeries Neo ICON Keypad w/prox
PowerSeries Neo ICON Keypad w/ 433 MHz Transceiver
PowerSeries Neo ICON Keypad w/ 868 MHz Transceiver
PowerSeries Neo ICON Keypad w/ 915 MHz Transceiver
PowerSeries Neo ICON Keypad w/ 433 MHz Transceiver + prox
PowerSeries Neo ICON Keypad w/ 868 MHz Transceiver + prox
PowerSeries Neo ICON Keypad w/ 915 MHz Transceiver + prox
*Note Icon keypad variants were found to have an acceptable volume and will have the
new firmware version update for production consistency. There is no volume increase for
HS2ICN keypad variants.
Compatibility
 V1.31 keypads are compatible with all existing versions of PowerSeries Neo control
panels and modules
 Wire-free keypads are not firmware upgradable and cannot be upgraded to V1.31
Instructions for install base and warehouse stock
Products installed or in stock can be upgraded to V1.31 in advance, or at the time of install.
Order Entry Contact
1-888-888-7838
Sales Contact
For additional
information please
contact your local sales
representative or email
info@dsc.com
Technical Support Contact
North America: +1-800-387-3630
Latin America: +1-416-645-8083
EMEA – Local: +31 475 352 722
EMEA - Toll Free: 800-22558926
APAC – Local: +86-21-61916510
APAC - Toll Free: +800-22558926
Download PDF
Similar pages