NetLink Cable for Siemens S7 300/400 Ethernet Kepware Technologies, Inc. 400 Congress St., 3rd Floor, Portland, ME 04101 Mailing: PO Box 579, Portland, ME 04112 INDIA: Protocol Automation Technologies Pvt. Ltd. 59/1, Langford Road, Bangalore - 560025 Phone: +91-80-22100459/460 Fax: +91-80-22076635 Product No. CNV-NTLNK-HW00 Price Rs. 32000/- + 12.5% VAT or CST as applicable Overview: Kepware is now offering the NetLink Ethernet Converter Cable for use with Siemens S7 300 and 400 PLCs. NetLink offers an alternative to the CP communication processor. With NetLink you can communicate to your PLC by linking via a switch, Ethernet hub, or directly to the PC using a single network card. NetLink interfaces the PLC via the PROFIBUS interface using Siemens 'MPI' Protocol. The NetLink cable can be used in conjunction with Kepware's Siemens S7 200/300/400 TCP/IP Ethernet OPC Server (KEPServerEX) and the NetLink Configuration Utility supplied with the Siemens OPC Server. Length of entire cable/adapter is 10 feet. Manual/Features: • • • • • • • • • • Dimensions (LxWxH) 65x48x16 Length of entire cable/adapter is 10 feet Power Supply - 24 V DC Current Consumption - 50 mA Operating Tempature - 0°C....55°C Ethernet Transmission rate - 10/100 MBit/sec 10/100 BASE-T (RJ45) MPI Transmission rate - up to 12 MBit/sec 2 LED displays No power supply unit required. Network Example: Network example using Kepware's KEPServerEX and the Siemens S7 200/300/400 Ethernet Device Driver connected to an Ethernet hub and then connected to a Siemens S7 300 and S7 400 via two NetLink cables.