MODEL PLC-XU55A PLC

Multimedia Projector
MODEL
PLC-XU55A
PLC-XU50A
Owner’s Manual
Table of Contents
Table of Contents
2
To the Owner
3
Safety Instructions
4
Installing the Projector in Proper Position
Air Circulation
Moving the Projector
5
5
5
Compliance
6
Connecting the AC Power Cord
7
Features and Design
8
Part Names and Functions
9
Computer Input
24
Input Source Selection
Computer System Selection
Computer Adjustment (Auto)
Computer Adjustment (Manual)
Image Level Selection
Image Level Adjustment
Screen Size Adjustment
24
25
26
27
29
30
31
Video Input
32
Input Source Selection (Video, S-Video)
Input Source Selection (Component, RGB Scart 21-Pin)
Video System Selection
Image Level Selection
Image Level Adjustment
Screen Size Adjustment
32
33
34
35
36
37
Setting
38
Setting
38
Front
Back
Bottom
Terminal
Top
Remote Control
Laser Pointer Function
Pointer Function
Remote Control Code
Wireless Mouse Operation
Remote Control Operating Range
Remote Control Batteries Installation
9
9
9
10
11
12
13
13
14
14
15
15
Maintenance and Cleaning
41
Warning Indicator
Cleaning the Air Filters
Cleaning the Projection Lens
Cleaning the Projector Cabinet
Lamp Replacement
Lamp Replace Counter
41
42
42
42
43
44
Installation
16
Appendix
45
Positioning the Projector
Adjustable Feet
Connecting to a Computer
Connecting to Video Equipment
16
16
17
18
Basic Operation
19
Turning On the Projector
Turning Off the Projector
Zoom Adjustment
Focus Adjustment
Keystone Adjustment
Picture Freeze Function
No Show Function
P-Timer Function
Sound Adjustment
On-Screen Menu
Menu Bar
19
19
20
20
20
20
21
21
21
22
23
Troubleshooting
Indicators and Projector Condition
Menu Tree
Compatible Computer Specifications
Technical Specifications
Configurations of Terminals
Optional Parts
Attaching the Lens Cover
45
47
48
50
51
52
53
54
TRADEMARKS
● Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer,Inc.
● IBM, VGA, XGA, and PS/2 are trademarks or registered trademarks of International Business Machines, Inc.
● Windows and PowerPoint are registered trademarks of Microsoft Corporation.
● Each name of corporations or products in the owner's manual is a trademark or a registered trademark of its respective
corporation.
2
To the Owner
Before operating this projector, read this manual thoroughly
and operate the projector properly.
This projector provides many convenient features and
functions. Operating the projector properly enables you to
manage those features and maintains it in better condition for
a considerable time.
Improper operation may result in not only shortening the
product-life, but also malfunctions, fire hazard, or other
accidents.
If your projector seems to operate improperly, read this
manual again, check operations and cable connections and try
the solutions in the “Troubleshooting” section at the end of
this booklet. If the problem still persists, contact the dealer
where you purchased the projector or the service center.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION :
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE OWNER'S MANUAL WITH
THIS UNIT.
Safety Precaution
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
– This projector produces intense light from the projection
lens. Do not stare directly into the lens as possible. Eye
damage could result. Be especially careful that children do
not stare directly into the beam.
– Install the projector in a proper position. If not, it may
result in a fire hazard.
– Provide appropriate space on the top, sides and rear of the
projector cabinet for allowing air circulation and cooling the
projector. Minimum clearance must be maintained. If the
projector is to be built into a compartment or similarly
enclosed, the minimum distances must be maintained. Do
not cover the ventilation slot on the projector. Heat buildup can reduce the service life of your projector, and can
also be dangerous.
SIDE and TOP
REAR
20cm
50cm
50cm
50cm
– The remote control, supplied to this projector, emits a laser
beam as the Laser pointer function from laser light window
while pressing the LASER button (for 1 minute / Signal
Emission indicator lights red to indicate laser emission). Do
not look into the laser light window or shine the laser beam
on a mirror, yourself or other people. Eye damage may
result.
– Do not put any flammable object or spray can near the
projector, hot air is exhausted from the ventilation holes.
– If the projector is not to be used for an extended time,
unplug the projector from the power outlet.
READ AND KEEP THIS OWNER'S MANUAL FOR LATER
USE.
3
Safety Instructions
All the safety and operating instructions should be read before
the product is operated.
Read all of the instructions given here and retain them for later
use. Unplug this projector from AC power supply before
cleaning. Do not use liquid or aerosol cleaners. Use a damp
cloth for cleaning.
This projector should be operated only from the type of power
source indicated on the marking label. If you are not sure of
the type of power supplied, consult your authorized dealer or
local power company.
Follow all warnings and instructions marked on the projector.
Do not overload wall outlets and extension cords as this can
result in fire or electric shock. Do not allow anything to rest
on the power cord. Do not locate this projector where the
cord may be damaged by persons walking on it.
For added protection to the projector during a lightning storm,
or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet. This will prevent damage
due to lightning and power line surges.
Do not attempt to service this projector yourself as opening or
removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service
personnel.
Do not expose this unit to rain or use near water... for
example, in a wet basement, near a swimming pool, etc...
Do not use attachments not recommended by the
manufacturer as they may cause hazards.
Do not place this projector on an unstable cart, stand, or table.
The projector may fall, causing serious injury to a child or
adult, and serious damage to the projector. Use only with a
cart or stand recommended by the manufacturer, or sold with
the projector. Wall or shelf mounting should follow the
manufacturer's instructions, and should use a mounting kit
approved by the manufacturers.
An appliance and cart combination should
be moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the appliance and cart
combination to overturn.
Slots and openings in the back and bottom of the cabinet are
provided for ventilation, to insure reliable operation of the
equipment and to protect it from overheating.
Unplug this projector from wall outlet and refer servicing to
qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d. If the projector does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the projector to normal operation.
e. If the projector has been dropped or the cabinet has been
damaged.
f. When the projector exhibits a distinct change in
performance-this indicates a need for service.
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer that have the same characteristics as the
original part. Unauthorized substitutions may result in fire,
electric shock, or injury to persons.
Upon completion of any service or repairs to this projector,
ask the service technician to perform routine safety checks to
determine that the projector is in safe operating condition.
The openings should never be covered with cloth or other
materials, and the bottom opening should not be blocked by
placing the projector on a bed, sofa, rug, or other similar
surface. This projector should never be placed near or over a
radiator or heat register.
This projector should not be placed in a built-in installation
such as a book case unless proper ventilation is provided.
Never push objects of any kind into this projector through
cabinet slots as they may touch dangerous voltage points or
short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the projector.
Do not install the projector near the ventilation duct of airconditioning equipment.
4
Voor de klanten in Nederland
Bij dit product zijn batterijen
geleverd.
Wanneer deze leeg zijn,
moet u ze niet weggooien
maar inleveren als KCA.
Safety Instructions
Installing the Projector in Proper Position
Install the projector properly. Improper installation may reduce the lamp lifetime and cause a fire hazard.
20˚
Do not put the projector on either
side to project an image.
Do not tilt the projector more than
20 degrees above and below.
20˚
NO SIDEWAYS
Do not point the projector down
to project an image.
NO DOWNWARD
Do not point the projector up to
project an image.
NO UPWARD
Air Circulation
Openings in the cabinet are provided for ventilation and to ensure reliable operation of
the product and to protect it from overheating, and these openings must not be
blocked or covered.
Air Intake Vent
CAUTION
Exhaust Vent
(Hot air exhaust)
Air Intake Vent
Hot air is exhausted from the exhaust vent. When using or installing the projector,
the following precautions should be taken.
● Do not put any flammable objects near the vent.
● Keep the exhaust vent at least 3’(1m) away from any objects.
● Do not touch a peripheral part of the exhaust vent, especially screws and metallic
part. This area will become hot while the projector is being used.
● Do not put anything on the cabinet. The materials put on the cabinet will not only
get damaged but also cause fire hazard by heat.
Cooling fans are provided to cool down the projector. This projector monitors internal
temperature and control the running speed of the cooling fans.
Moving the Projector
When moving the projector, replace the lens cover and retract the adjustable feet to prevent damage to the lens and
cabinet. When the projector is not in use for an extended period, put it into the carrying bag supplied with the projector.
The carrying bag is intended for protection from dust and scratches on the surface of a cabinet, and it is not designed to
protect the projector from external forces. Do not transport the projector through a courier or transport services with this
bag. The projector can be damaged. When handling the projector, do not drop, bump, subject it to strong forces or put
other things on the cabinet.
CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR
● Do not drop or bump the projector, otherwise damages or malfunctions may result.
● When carrying the projector, use a suitable carrying case.
● Do not transport the projector by using a courier or transport service in an unsuitable transport case. This may cause
damage to the projector. To transport the projector through a courier or transport service, consult your dealer for best
way.
5
Compliance
Federal Communication Commission Notice
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures :
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or
modifications should be made, you could be required to stop operation of the equipment.
Model Numbers
Trade Name
Responsible party
Address
Telephone No.
: PLC-XU55A, PLC-XU50A
: Sanyo
: SANYO FISHER COMPANY
: 21605 Plummer Street, Chatsworth, California 91311
: (818)998-7322
AC POWER CORD REQUIREMENT
The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.
AC Power Cord for the United States and Canada :
AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories
(UL) and certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug
will fit into the power outlet. Do not try to defeat this safety feature. Should you be unable to
insert the plug into the outlet, contact your electrician.
GROUND
AC Power Cord for the United Kingdom :
This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the
plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus
. If the fuse cover is detachable, never use the plug with the cover omitted. If a replacement fuse cover is required,
ensure it is of the same colour as that visible on the pin face of the plug (i.e. red or orange). Fuse covers are available from
the Parts Department indicated in your User Instructions.
If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed.
The end of the flexible cord should be suitably prepared and the correct plug fitted. (See Over)
ASA
WARNING : A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET
OUTLET.
The Wires in this mains lead are coloured in accordance with the following code:
Green-and-yellow ············ Earth
Blue ································· Neutral
Brown ······························ Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying
the terminals in your plug proceed as follows:
The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by the letter E
or by the safety earth symbol
or coloured green or green-and-yellow.
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.
WARNING : THIS APPARATUS MUST BE EARTHED.
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.
6
Compliance
Connecting the AC Power Cord
This projector uses nominal input voltages of 100-120 V or 200-240
V AC. This projector automatically selects the correct input
voltage. It is designed to work with single-phase power systems
having a grounded neutral conductor. To reduce risk of electrical
shock, do not plug into any other type of power system.
Consult your authorized dealer or service station if you are not sure
of the type of power being supplied.
Connect the projector with all peripheral equipment before turning
the projector on. (See page 17-18 for connection.)
CAUTION
For safety, unplug AC power cord when the projector is not in
use.
When this projector is connected to an outlet with AC power
cord, it is in Stand-by mode and consumes a little electric
power.
Connect AC power cord (supplied) to the projector.
The AC outlet must be near this equipment and must
be easily accessible.
NOTE ON THE POWER CORD
AC power cord must meet requirement of the country where you use a projector.
Confirm an AC plug type with the chart below and proper AC power cord must be used.
If supplied AC power cord does not match your AC outlet, contact your sales dealer.
Projector side
AC outlet side
For the U.S.A. and Canada
For Continental Europe
For the U.K.
Ground
To power cord connector on your projector.
To the AC outlet.
(120 V AC)
To the AC outlet.
To the AC outlet.
(200 - 240 V AC)
(200 - 240 V AC)
7
Features and Design
This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This
projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD)
technology.
◆
Compact Design
This projector is extremely compact in size and weight.
It is designed to be carried and work anywhere you wish
to use.
◆
Compatibility
The projector widely accepts various video and
computer input signals including;
● Computers
IBM-compatible or Macintosh computer up to
1280 x 1024 resolution.
● 6 Color Systems
NTSC, PAL, SECAM, NTSC 4.43, PAL-M or PAL-N
color system can be connected.
● Component Video
Component video signal, such as a DVD player
output high definition TV signals including 480i,
480p, 575i, 575p, 720p, 1035i or 1080i, can be
connected.
● S-Video
S-Video signal, such as a S-VHS VCR output
signal, can be connected.
● RGB Scart
RGB Scart signal can be connected.
◆
Simple Computer System Setting
The projector has the Multi-scan system to conform to
almost all computer output signals quickly. (See page
25.)
◆
Digital Zoom (for Computer)
The digital zoom function expands (to approx. 16 times
of screen size) or compress the image size, allowing you
to focus on crucial information at a presentation. (See
page 31.)
◆
Interlace Progressive Conversion
High-quality picture is available with this technology
which converts interlace signal into progressive signal.
(See page 36.)
◆
Keystone Adjustment
Keystone distortion can be corrected not only vertically
but also horizontally. The keystone correction function
enables you to use the projector where you wish to use.
(See page 20 and 38.)
◆
Power Management
The Power management function reduces power
consumption and maintain the lamp life. (See page 39.)
8
◆
User’s Logo
A projected image can be captured and used for the
starting display of the projector with the Capture
function. You can also display the captured image in an
interval during your presentation instead of blackout
image with the No show function. (See page 21, 38.)
◆
Lamp Mode
Brightness of the projection lamp can be changed by
setting. The projector has the function to adjust the
brightness according to an input signal for the best
suited image. (See page 40.)
◆
Pointer Function
The projector has a convenient function which displays
Spotlight or Pointer controlled by the remote control on a
projected image. The remote control also has the Laser
pointer function. These functions will make your
important presentation more effective. (See page 13,
40.)
◆
Multilanguage Menu Display
Operation menu is available in; English, German, French,
Italian, Spanish, Portuguese, Dutch, Swedish, Russian,
Chinese, Korean, or Japanese. (See page 38.)
◆
Switchable Interface Terminal
The projector provides a switchable interface terminal.
You can use the terminal as computer input or monitor
output conveniently. (See page 39.)
◆
Digital Visual Interface
The projector is equipped with DVI 29-pin terminal for
connecting DVI output from a computer or video
equipment. You can also enjoy digital entertainment
content protected by HDCP technology. (See page 24
for HDCP.)
◆
Wireless Mouse
The remote control supplied with this projector has
wireless mouse function for a connected computer.
This function enables you to operate both the projector
and the connected computer with the remote control.
(See page 14.)
◆
Multi Card Imager (optional)
The projector can be operated through wired/wireless
LAN by attaching the Multi Card Imager that is optionally
supplied. The Multi Card Imager is also used as a
viewer. Contact the dealer where you purchased the
projector for the Multi Card Imager.
Part Names and Functions
Front
q
w
e
r
t
y
u
q
Back
w ert
q
y
w
Power Cord Connector
Infrared Remote Receiver
Zoom Lever
Focus Ring
Projection Lens
Lens Cover (See page 54 for attaching.)
Air Intake Vent
u
e
r
q Exhaust Vent
CAUTION
Hot air is exhausted from the exhaust
vent. Do not put heat-sensitive
objects near this side.
w
e
r
t
Top Controls and Indicators
Air Intake Vent
Terminals and Connectors
Speaker
t
Bottom
q
w
e
q Lamp Cover
w Air Intake Vent (back and bottom)
e Air Filter
r Adjustable Feet
r
9
Part Names and Functions
Terminal
q
w
t
AUDIO IN
R
L (MONO) VIDEO
COMPUTER IN 1
DVI - I
*
r
e
S-VIDEO
SERVICE PORT
y
USB
COMPUTER /
COMPONENT
RESET
AUDIO IN
AUDIO OUT
MCI
COMPUTER IN 2 /
COMPONENT IN /
MONITOR OUT
Do not press this button. This button is used for optional
accessories.
u
i
o
q
COMPUTER IN 1 DVI-I
Connect computer output (Digital/Analog DVI-I type) or Multi
Card Imager (optional) to this terminal. (p17)
y
AUDIO IN COMPUTER / COMPONENT
Connect the audio output (stereo) from a computer or video
equipment connected to q or u to this jack. (p17, 18)
w
SERVICE PORT
This jack is used to service this projector.
u
e
AUDIO IN
Connect the audio output from video equipment connected to
r or i to this jack. (When the audio output is monaural,
connect it to L (MONO) jack.) (p17, 18)
r
VIDEO
Connect the composite video output from video equipment to
VIDEO jack. (p18)
COMPUTER IN 2 /COMPONENT IN / MONITOR OUT
This terminal is switchable and can be used as computer input ,
component input, RGB Scart 21-Pin Video input, or monitor
output. Set the terminal up as either Computer input or
Monitor output properly before using this terminal. An optional
cable is required when using this terminal as component input
or RGB Scart 21-Pin Video input. (p17, 18)
(This terminal outputs analog signal from COMPUTER IN 1 DVI-I
terminal only when using as Monitor out.)
i
t
USB (Series B)
When operating the connected computer with the remote
control, connect USB port of your computer to this connector
with a USB cable. (p17)
S-VIDEO
Connect the S-VIDEO output from video equipment to this jack.
(p18)
o
AUDIO OUT (VARIABLE)
Connect an external audio amplifier to this jack. (p17, 18)
This terminal outputs sound from AUDIO IN terminal (e or y).
*
10
(VARIABLE)
A built-in micro processor which controls this unit may occasionally
malfunction and need to be reset. This can be done by pressing the
RESET button with a pen, which will shut down and restart the unit. Do
not use the RESET function excessively.
Part Names and Functions
Top
This projector has control buttons and indicators on its top.
q w
e
r
t
y
ON - OFF
POWER
INPUT
SELECT
UME +
VOL
KEYSTONE
UM
VOL E –
WARNING
LAMP
REPLACE
MENU
u
q
KEYSTONE button
Corrects keystone distortion. (p20, 38)
w
INPUT button
Selects input source. (p24, 32 )
e
POWER ON–OFF button
Turns the projector on or off. (p19)
r
SELECT button
Executes the item selected. It is also used to expand /
compress the image in Digital zoom +/– mode. (p31)
t
POWER indicator
Flashes red until the projector gets ready to be turned on. It
turns red when the projector is in the stand-by mode. It
remains green while the projector is under operation.
i
o
y
WARNING indicator
Lights red when the projector detects abnormal condition. This
also flashes red when the internal temperature of the projector
exceeds the operating range. (p41)
u
MENU button
Opens or closes the On-Screen Menu. (p22)
i
POINT (Up/Down/Left/Right ) button
Selects an item or adjusts value in the On-Screen Menu. These
are also used to pan the image in the Digital zoom +/– mode.
(p31)
Point Left/Right button are used as VOLUME +/– button. (p21)
o
LAMP REPLACE indicator
Turns yellow when the life of the projection lamp draws to an
end. (p43)
11
Part Names and Functions
Remote Control
q
w
e
r
t
y
u
q
L-CLICK button
Acts as left click for wireless mouse operation. (p14)
w
SIGNAL EMISSION indicator
This indicator lights red while the laser beam is being emitted from the laser light
window or a signal is being sent from the remote control to the projector.
e
AUTO PC button
Operates the Auto PC adjustment function. (p26)
r
D.ZOOM button
Selects the Digital zoom +/– mode and resize the image. (p31)
t
FREEZE button
Freezes the projected picture. (p20)
y
IMAGE button
Selects image levels.(p29, 35)
u
PAGE UP/DOWN button
Turns pages; the Up button to the previous page and the Down button to the next
page for an image from a computer. Connect the projector and your computer with
a USB cable before use. (p17)
i
POINT (UP/DOWN/LEFT/RIGHT) button
Selects an item or adjusts value in the On-Screen Menu. These are also used to pan
the image in the Digital zoom +/- mode. (p31)
Point Left/Right button are also used as VOLUME +/- button. (p21)
o PRESENTATION POINTER button
Move a pointer of the projector or a pointer for wireless mouse operation. (p13,
14)
!4
!5
!6
!7
i
!0
!1 KEYSTONE button
Corrects keystone distortion. (p20, 38)
!2
SELECT button
Executes the item selected, or to expand or compress image in the Digital zoom +/mode. (p31)
!3
LASER button
Operates the Laser pointer function. Laser beam is emitted while pressing this
button within 1 minute. When using this laser pointer for more than 1 minute,
release the LASER button and press it again. This button is also used as a
switching button to activate the Pointer function of the projector. (p13)
!4
POWER ON-OFF button
Turns the projector on or off. (p19)
!5
NO SHOW button
Turns the picture into black image. (p21)
o
!0
!1
!2
!3
!8
!9
@0
!6
@1
!7
12
MENU button
Opens or closes the On-Screen Menu. (p22)
P-TIMER button
Operates P-Timer function. (p21)
MUTE button
Mutes sound. (p21)
!8
R-CLICK button
Acts as right click for wireless mouse operation. (p14)
!9
COMPUTER button
Selects input source (COMPUTER 1 or COMPUTER 2). (p24)
@0
VIDEO button
Selects input source (VIDEO). (p32)
@1
RESET/ON/ALL-OFF switch
When using the remote control, set this switch to “ON.” Set it to “ALL OFF” for
energy saving when it is not used. Slide this switch to the "RESET" to initialize the
remote control code. (p14)
Part Names and Functions
Laser Pointer Function
This remote control emits a laser beam as Laser pointer function from the laser light window. When the LASER button is
pressed, laser light goes on. When the LASER button is being pressed for more than 1 minute or the LASER button is
released, light goes off. The signal emission indicator lights red and laser is emitted with red light to indicate laser beam is
being emitted.
The laser emitted is a class II laser; therefore, do not look into the laser light window or shine the laser beam on yourself or
other people. The marks below are caution labels for laser beam.
CAUTION : Use of controls, adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure. Do not look into the laser light window while laser is emitting, otherwise eye
damage may result.
These caution labels are put on the remote control.
Signal Emission Indicator
Laser Light Window
Pointer Function
You can move Spotlight or Pointer of the projector with the remote control to emphasize a part of the projected image.
(See “Pointer” on page 40 for changing the patterns and sizes.)
1
2
3
While pressing the MENU button, hold down the NO SHOW
button for more than 7 seconds so that the Pointer function
can be available. (The Laser pointer function has switched to
the Pointer function.)
Press the LASER button on the remote control toward the
projector and see if the LASER button lights green, and
Spotlight or Pointer is displayed on the screen. Then you can
move Spotlight or Pointer with the PRESENTATION
POINTER button. If the LASER button does not light green
and still emits laser beam, the Laser pointer function has not
switched to the Pointer function yet. Try these steps until
the LASER button lights green.
NO SHOW button
While pressing the MENU button, hold
down the NO SHOW button for more
than 7 seconds.
PRESENTATION POINTER button
MENU button
To clear Spotlight or Pointer displayed on the screen, press
the LASER button toward the projector and see if the LASER
button turns off.
To use the Laser pointer function once again, while pressing
the MENU button, hold down the NO SHOW button for
more than 7 seconds.
Spotlight
Pointer
PRESENTATION POINTER button
LASER button
NOTE
● You can choose the size of Spotlight (Large, Middle, and Small) and the
pattern of Pointer (Arrow, Finger, and Dot) in the Setting Menu. See
“Pointer” on page 40.
After the Laser pointer function has
switched to the Pointer function, the
LASER button is used as the Pointer
function ON-OFF switch instead of the
Laser pointer function.
Press the LASER button toward the
projector and see if it lights green.
13
Part Names and Functions
Remote Control Code
This projector has eight different remote control codes (Code 1-Code 8); the factory-set, initial code (Code 1) and the other
seven codes (Code 2 to Code 8). This switching function prevents remote control interference when operating several
projectors or video equipment at the same time. (Change the remote control code for the projector first before changing
that for the remote control. See “Remote control” on page 40.)
1
While pressing the MENU button, press the IMAGE button
number of times corresponding to each remote control code
number. Each time you press the IMAGE button, the code is
changed sequentially. (See the list below.)
2
To initialize the remote control code for the remote control,
slide the RESET/ON/ALL-OFF switch to the RESET, and then
to the ON. The initial code is Code 1.
Remote Control Code
Number of Times of
Pressing IMAGE Button
Code 1
1
Code 2
2
Code 3
3
Code 4
4
Code 5
5
Code 6
6
Code 7
7
Code 8
8
IMAGE button
While pressing the MENU button,
press the IMAGE button number of
times corresponding to the remote
control code for the projector.
MENU button
Wireless Mouse Operation
The remote control can be used as a wireless mouse for your computer. Before operating the wireless mouse, connect
your computer and the projector with the supplied USB cable. (See page 17 for connection.) When the Pointer function is
used, the wireless mouse is not available.
PRESENTATION POINTER button
Move the pointer on the screen
with this button.
L-CLICK button
Acts as left click while the
projector and a computer are
connected with a USB cable.
14
R-CLICK button
Acts as right click while the
projector and a computer are
connected with a USB cable.
Part Names and Functions
Remote Control Operating Range
Point the remote control toward the projector (Infrared Remote Receiver) whenever pressing any button. Maximum
operating range for the remote control is about 16.4’ (5m) and 60° in front of the projector.
16.4’
(5 m)
60°
Remote Control Batteries Installation
1
Remove the battery
compartment lid.
Press the lid downward and slide it.
2
Slide the batteries into
the compartment.
3
Replace the compartment
lid.
Two AA size batteries
For correct polarity (+ and
–), be sure battery
terminals are in contact
with pins in compartment.
To insure safe operation, please observe the following precautions :
● Use (2) AA, UM3 or R06 type alkaline batteries.
● Replace two batteries at the same time.
● Do not use a new battery with a used battery.
● Avoid contact with water or liquid.
● Do not expose the remote control to moisture, or heat.
● Do not drop the remote control.
● If a battery has leaked on remote control, carefully wipe case clean and install new batteries.
● Risk of explosion if battery is replaced by an incorrect type.
● Dispose of used batteries according to the instructions.
15
Installation
Positioning the Projector
This projector is designed to project on a flat projection surface and can be focused from 3.3’(1.0m) - 25.3’(7.7m). Refer to
the figure and the table below for the screen size and the distance between the projector and the screen.
A:B = 9:1
25.3' (7.7m)
300”
(Inch Diagonal)
16.4' (5.0m)
12.5' (3.8m)
195”
195”
8.2' (2.5m)
150”
3.3' (1.0m)
Min. Zoom
127”
100”
40”
Max. Zoom
A
97”
64”
(Center)
B
Screen Size
(W x H) mm
4 : 3 aspect ratio
40”
100”
150”
195”
300”
813 x 610
2032 x 1524
3048 x 2286
3962 x 2972
6096 x 4572
Zoom (min)
4.9' (1.5m)
12.8' (3.9m)
19.3' (5.9m)
25.3' (7.7m)
––-––
Zoom (max)
3.3' (1.0m)
8.2' (2.5m)
12.5' (3.8m)
16.4' (5.0m)
25.3' (7.7m)
NOTE
● The brightness in a room has a great influence on picture quality. It is
recommended to limit ambient lighting in order to provide the best
image.
● The values shown are approximate and may vary from the actual size.
Adjustable Feet
Projection angle can be adjusted up to 11.8 degrees with the adjustable feet.
1
Lift the front of the projector and pull the feet lock latches on
both sides of the projector.
2
Release the feet lock latches to lock the adjustable feet and
rotate the adjustable feet to adjust the position and tilt.
3
To retract the adjustable feet, lift the front of the projector
and pull and undo the feet lock latches.
Keystone distortion of the projected image can be adjusted
by menu operation. (p20, 38)
CAUTION
Tilt the projector within the adjustable range in order not to shorten
the life of the lamp. Proper angle should be taken. See page 5.
Feet Lock Latches
Adjustable Feet
16
Installation
Connecting to a Computer
Cables used for connection (✽ = These accessories are not supplied with this projector.)
• VGA Cable (HDB 15 pin) ✽
• DVI-VGA Cable (HDB 15 pin)
• DVI-Digital Cable (for Single Link T.M.D.S.) ✽
• USB Cable
• MAC Adapter (When connecting to Macintosh computer) ✽
• Audio Cables ( Mini Plug (stereo) x 2) ✽
IBM-compatible computer or Macintosh computer (VGA / SVGA / XGA / SXGA)
Desktop type
Monitor Output
Monitor Output
Laptop type
Monitor Output
or
Monitor Input
USB port
Audio Output
MAC Adapter ✽
Set slide switches according to
the chart below.
USB
Cable
VGA
Cable ✽
DVI Cable ✽
DVI-VGA Cable
COMPUTER IN 1 DVI-I
COMPUTER IN 2 /
COMPONENT IN/
MONITOR OUT
SERVICE PORT
COMPUTER/COMPONENT
AUDIO IN
USB
AUDIO IN
R
L (MONO) VIDEO
COMPUTER IN 1
DVI - I
COMPUTER IN 1 DVI-I
Audio
Cable ✽
(stereo)
S-VIDEO
USB
COMPUTER /
COMPONENT
RESET
AUDIO IN
AUDIO OUT
MCI
NOTE
COMPUTER IN 2 /
COMPONENT IN /
MONITOR OUT
● This terminal is switchable. Set the terminal
up as either Computer input or Monitor
output before using this terminal. (See Page
39.)
(VARIABLE)
Terminals
of the Projector
AUDIO OUT
NOTE :
When connecting the cable, the power
cords of both the projector and the
external
equipment
should
be
disconnected from AC outlet.
Audio Cable
(stereo) ✽
◆ MAC ADAPTER (Not supplied)
Set switches as shown in the table
below depending on RESOLUTION
MODE that you want to use before
you turn on projector and computer.
1
13" MODE (640 x 480)
ON
16" MODE (832 x 624) OFF
19" MODE (1024 x 768) OFF
21" MODE (1152 x 870) ON
2
ON
ON
ON
ON
ON
ON
Audio Input
DIP
1 2 3 4 5 6
External Audio Equipment
OFF
3
4
5
6
OFF OFF OFF OFF
OFF ON OFF OFF
ON OFF OFF OFF
ON ON OFF OFF
Audio Amplifier
Audio Speaker
(stereo)
17
Installation
Connecting to Video Equipment
Cables used for connection (✽ = These accessories are not supplied with this projector.)
• Scart-VGA Cable ✽
• Component-VGA Cable ✽
• Video Cable (RCA x 1) ✽
• S-VIDEO Cable ✽
• Audio Cables (Mini Plug (stereo) x 2 or RCA x 2) ✽
Video Source (example)
RGB Scart
21-pin Output
Scart-VGA
Cable ✽
Component Video Output
(Y, Pb/Cb, Pr/Cr)
ComponentVGA Cable ✽
COMPUTER IN 2 /
COMPONENT IN/
MONITOR OUT
Component video output equipment.
(such as DVD player or high-definition TV source.)
Video Disc Player
Video Cassette Recorder
S-VIDEO
Output
Audio Output
(R, L)
S-VIDEO
Cable ✽
Audio Cable
(RCA x 2) ✽
S-VIDEO
COMPUTER IN 2 /
COMPONENT IN/
MONITOR OUT
Composite Video Output
Video Cable
(RCA x 1) ✽
AUDIO IN
VIDEO
AUDIO IN
R
L (MONO) VIDEO
COMPUTER IN 1
DVI - I
SERVICE PORT
S-VIDEO
Audio Output
Audio Cable
(Stereo) ✽
AUDIO IN
USB
COMPUTER /
COMPONENT
RESET
AUDIO IN
AUDIO OUT
MCI
COMPUTER IN 2 /
COMPONENT IN /
MONITOR OUT
Terminals
of the Projector
(VARIABLE)
AUDIO OUT
NOTE
● The S-VIDEO jack has priority over the VIDEO jack under the
condition of connecting both the S-VIDEO jack and the VIDEO
jack when selecting AUTO in the Input Menu.
● Select COMPUTER 2 in the Setting Menu when the
COMPUTER IN 2/COMPONENT IN/MONITOR OUT terminal is
used as RGB Scart 21-Pin video input or Component video
input. (See “Terminal” on page 39.)
● Input sound to the COMPUTER/COMPONENT AUDIO IN
terminal when using the COMPUTER IN 2/COMPONENT
IN/MONITOR OUT terminal as input.
Audio Cable
(Stereo) ✽
Audio Input
External Audio Equipment
NOTE :
When connecting the cable, the power
cords of both the projector and the
external
equipment
should
be
disconnected from AC outlet.
18
Audio Amplifier
Audio Speaker
(stereo)
Basic Operation
Turning On the Projector
1
Complete peripheral connections (with a computer, VCR, etc.)
before turning on the projector.
2
Connect the projector's AC power cord into an AC outlet. The
POWER indicator flashes red in a moment and turns on red.
3
Press the POWER ON-OFF button on the top control or on the
remote control. The POWER indicator turns green, and the
cooling fans start to operate. The preparation display appears on
the screen and the count down starts. (A captured image can
be used as the preparation display. See “Capture” on page 38.)
4
26
After the count-down, the input source that was selected last
and the Lamp mode status icon appear on the screen.
The preparation display disappears after 30 seconds.
Selected Input Source and Lamp Mode
Lamp mode
(See page 40 for Lamp mode.)
Turning Off the Projector
1
Press the POWER ON-OFF button on the top control or on the
remote control, and a message "Power off?" appears on the
screen.
2
Press the POWER ON-OFF button again to turn off the
projector. The POWER indicator starts to flash red, and it
continues while the cooling fans are operating (for about 90
seconds).
3
When the projector has cooled down enough to be turned on
again, the POWER indicator lights red. Then you can disconnect
the AC power cord.
The message disappears after 4 seconds.
TO MAINTAIN THE LIFE OF LAMP, ONCE YOU TURN
PROJECTOR ON, WAIT AT LEAST 5 MINUTES BEFORE
TURNING IT OFF.
DO NOT DISCONNECT AC POWER CORD WHILE
COOLING FANS ARE RUNNING OR BEFORE POWER
INDICATOR LIGHTS RED. OTHERWISE IT WILL RESULT
IN SHORTENING LAMP LIFE.
NOTE
● The projector cannot be turned on during the cooling period with the
POWER indicator flashing red. You can turn it on again after the POWER
indicator lights red.
● When the On start function is on, this projector is turned on automatically by
connecting the AC power cord to an AC outlet. (See page 39 for the On
start function.)
● Do not use the projector for more than 24 hours continuously. Turn off the
projector at least once in 24 hours and give it a rest. Continuous use may
result in shortening the lamp lifetime.
● This projector monitors internal temperature and automatically controls the
running speed of the cooling fans.
● If the WARNING indicator flashes or lights red, see “Warning Indicator” on
page 41.
19
Basic Operation
Zoom Adjustment
Move the Zoom Lever to zoom in and out.
Zoom Lever
Focus Adjustment
Rotate the Focus Ring to adjust the projected picture focus.
Focus Ring
Keystone Adjustment
If a projected picture has keystone distortion, correct the image with KEYSTONE adjustment.
1
Press the KEYSTONE button on the remote control or select
Keystone in the Setting Menu (p38). The keystone dialog box
appears.
2
Correct keystone distortion by pressing the Point
Up/Down/Left/Right button. Press the Point Up button to
reduce the upper part of the image, and press the Point Down
button to reduce the lower part. Press the Point Left button to
reduce the left part, and press the Point Right button to reduce
the right part.
Keystone adjustment can be memorized. (p38)
Reduce the upper width
with Point Up button.
Reduce the lower width
with Point Down button.
• The arrows are white when there is no correction.
• The arrows disappear at the maximum correction.
• The direction of the arrow being corrected turns red.
• If you press the KEYSTONE button on the top control
or on the remote control once more while the
keystone dialog box is being displayed, the keystone
adjustment will be canceled.
Reduce the left part with
Point Left button.
Reduce the right part with
Point Right button.
Picture Freeze Function
Press the FREEZE button on the remote control to freeze the picture
on the screen. To cancel the FREEZE function, press the FREEZE
button again or press any other button.
20
FREEZE button
Basic Operation
No Show Function
Press the NO SHOW button on the remote control to black out the
image. To restore to normal, press the NO SHOW button again or
press any other button. When a projected image is captured and set
as “User” in the Logo item in the Setting Menu (p38), the screen
changes each time you press the NO SHOW button as follows.
black out ➜ the captured image ➜ normal ➜ • • • • •
The message disappears after 4 seconds.
P-Timer Function
Press the P-TIMER button on the remote control. The timer display
“00 : 00” appears on the screen and the timer starts to count time (00
: 00 ~ 59 : 59).
To stop the P-Timer, press the P-TIMER button. And then, press the
P-TIMER button again to cancel the P-Timer function.
Sound Adjustment
Direct Operation
indicates approximate
level of volume.
Volume
Press the VOLUME (+/–) button on the top control or on the remote
control to adjust volume. The volume dialog box appears on the
screen for a few seconds.
(+) button to turn up the volume and (–) button to turn down the
volume.
Mute
Press the MUTE button on the remote control to cut off sound. To
restore sound to its previous level, press the MUTE button again or
press the VOLUME (+/–) button.
Press the MUTE button to set
the Mute function On or Off.
The display disappears after 4 seconds.
Menu Operation
1
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the Sound Menu icon.
2
Press the Point Down button to move the red frame pointer to
the item that you want to select, and then press the SELECT
button.
Volume
Sound Menu
Sound Menu icon
indicates approximate
level of volume.
closes the Sound Menu.
Press the Point Right button to turn up the volume, and press the
Point Left button to turn down the volume.
Mute
Press the Point Left/Right button to cut off sound. Dialog box display
is changed to “On” and sound is cut off. To restore sound to its
previous level, press the Point Left/Right button again.
21
Basic Operation
On-Screen Menu
You can control and adjust this projector through the On-Screen
Menu. Refer to the following pages to operate each adjustment
on the On-Screen Menu.
1
Press the MENU button to display the On-Screen Menu
(Menu bar). A red frame is a pointer.
2
Move the pointer (red frame) to the Menu icon that you want
to select by pressing the Point Left/Right button.
3
Remote Control
POINT button
SELECT button
MENU button
Press the Point Down button and move the pointer (red
frame or red arrow) to the item that you want to adjust, and
then press the SELECT button to show the item data.
Top Control
ON - OFF
POINT button
(outer ring)
POWER
To close this menu, select Quit. To clear the On-Screen
Menu, press the MENU button on the top control or on the
remote control.
WARNING
KEYSTONE
SELECT
UME +
VOL
5
INPUT
UM
VOL E –
4
Adjust the item data by pressing the Point Left/Right button.
Refer to the following pages for details of respective
adjustments.
LAMP
REPLACE
SELECT button
MENU
MENU button
On-Screen Menu
Menu icon
Menu bar
Pointer
(red frame)
Pointer (red frame)
Press the Point Down button to move the pointer.
Item
SELECT
button
Item data
Press the Point Left/Right buttons to adjust value.
Quit item closes this menu.
22
Basic Operation
Menu Bar
For computer source
Guide Window
PC System Menu
Image Select Menu
Screen Menu
Setting Menu
Shows the selected
Menu of the OnScreen Menu.
Used to select
computer system.
(p25)
Used to select an
image level among
Standard, Real,
and Image 1 ~ 4.
(p29)
Used to adjust size
of image. [Normal
/ True / Wide /
Digital zoom +/–]
(p31)
Used to change
settings of the
projector or reset lamp
replace counter.
(p38-40)
Input Menu
PC Adjust Menu
Image Adjust Menu
Sound Menu
Used to select
input source
either Computer
or Video. (p24)
Used to adjust
parameters to
match with input
signal format.
(p26-28)
Used to adjust computer image.
[Contrast / Brightness / Color
temp. / White balance (R/G/B) /
Sharpness / Gamma] (p30)
Used to adjust
volume or mute
sound. (p21)
For video source
Same function as
menu for computer
source.
Input Menu
Image Select Menu
Screen Menu
Used to select
input source
either Video or
Computer.
(p32)
Used to select an
image level among
Standard, Cinema,
and Image 1 ~ 4.
(p35)
Used to set size
of image to
Normal or Wide.
(p37)
AV System Menu
Image Adjust Menu
Used to select
system of selected
video source.
(Refer to p34)
Used to adjust picture image.
[Contrast / Brightness / Color / Tint /
Color temp. / White balance (R/G/B) /
Sharpness / Gamma / Progressive]
(Refer to p36, 37)
Same function as menu
for computer source.
23
Computer Input
Input Source Selection
Direct Operation
Choose either Computer 1 or Computer 2 by pressing the INPUT
button on the top control or press the COMPUTER button on the
remote control.
Before using these buttons, correct input source should be selected
through menu operation as described below.
INPUT button
Computer 1
✽
Computer 2
Video
COMPUTER button
Computer 1
Computer 2
✽
✽ Computer 2 is not displayed when the COMPUTER IN
2/COMPONENT IN/MONITOR OUT terminal is used as
Monitor out.
Menu Operation
1
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the Input Menu icon.
2
Press the Point Down button to move the red arrow pointer to
either Computer 1 or Computer 2 (Only the Computer 1 is
displayed when Monitor out is selected in the Setting Menu.),
and then press the SELECT button. The Source Select Menu
will appear.
Input Menu
Input Menu icon
3
Computer
1
Source Select Menu
Move the pointer to the correct input source and then press the
SELECT button.
RGB (Analog)
When the input source is analog coming from a
computer through the DVI terminal, select RGB
(Analog).
RGB (PC Digital) When the input source is digital coming from a
computer through the DVI terminal, select RGB (PC
Digital)
Move the pointer (red arrow)
to Computer 1 and press the
SELECT button.
Move the pointer to
RGB(Analog), RGB (PC
Digital), or RGB(AV HDCP)
and press the SELECT button.
✽ Computer 2 is not displayed when the COMPUTER IN
2/COMPONENT IN/MONITOR OUT terminal is used as
Monitor out.
Input Menu
RGB (AV HDCP) When the input source compatible with HDCP is
coming from video equipment through the DVI
terminal, select RGB (AV HDCP).
Input Menu icon
RGB
When the input source is analog coming from a
computer through the COMPUTER IN
2/COMPONENT IN/MONITOR OUT terminal, select
RGB.
Move the pointer (red arrow)
to Computer 2 and press the
SELECT button.
Computer
2
Source Select Menu
Move the pointer to RGB and
press the SELECT button.
NOTE
● HDCP (High-bandwidth Digital Content Protection) is a system for
protecting digital entertainment content delivered by DVI (Digital Visual
Interface) from being copied.
The specification of HDCP is decided and controlled by Digital Content
Protection, LLC. Should the specification be changed, this projector may
not display the digital content protected by HDCP.
24
Computer Input
Computer System Selection
This projector can detect most of the current computer systems with the Multi-scan system and the Auto PC adjustment
function provided in the projector. When selecting computer input, the projector automatically displays the most proper
image for the input signal. One of the following four displays appears on the system menu icon. If the projector does not
tune the input signal and the projected image is not displayed properly, or when you wish to adjust it manually, perform
manual adjustment as described on page 27 and 28.
Auto
When the projector cannot recognize the connected
signal as PC system provided in this projector, the Auto
PC Adjustment function operates to adjust the projector
and the message “Auto” is displayed in the PC System
Menu icon. When the image is not provided properly,
manual adjustment is required. (p27, 28)
––––
There is no signal input from the connected computer.
Check the connection of the computer and see if the
projector is set correctly.
(See “Troubleshooting” on page 45.)
Mode 1
User preset adjustment in Computer Adjustment.
Adjustment data can be stored in Mode 1 - 5. (page 27,
28.)
SVGA 1
Computer systems provided in the projector. The
projector chooses a proper system and displays it.
PC System Menu
The Auto PC Adjustment function operates to adjust the projector.
*Mode 1 and SVGA 1 are examples.
PC system can also be selected manually if some PC systems appear
on the On-Screen Menu.
1
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right buttons to move the red frame
pointer to the PC System Menu icon.
2
Press the Point Down button to move the red arrow pointer to
the system that you want to set, and then press the SELECT
button.
PC System Menu
The PC System Menu icon
displays the system being
selected.
The systems on this dialog
box can be selected.
Custom Mode (1~5) set in the
PC Adjust Menu. (p27, 28)
25
Computer Input
Computer Adjustment (Auto)
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to conform to
your computer. Auto PC Adjustment function can be operated as follows.
1
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the PC Adjust Menu icon.
2
Press the Point Down button to move the red frame pointer to
the Auto PC Adj. icon and then press the SELECT button twice.
This Auto PC Adjust can also be executed by pressing the AUTO
PC button on the remote control.
Auto PC Adj.
Automatically adjusts Fine sync, Total dots, Horizontal, and Vertical for
the input signal from your computer.
To store adjustment data
Adjustment parameters from Auto PC Adjustment can be memorized
in this projector. Once parameters are memorized, the setting can be
done just by selecting Mode in the PC System Menu (p25). See
“Store” on page 28.
NOTE
● The PC Adjust Menu cannot be operated when the input signal is digital, a
signal compatible with HDCP, or a memory card is installed into Multi Card
Imager.
● The Auto PC Adjust cannot be operated when 480i, 575i, 480p, 575p, 720p,
1035i, or 1080i is selected in the PC System Menu.
26
PC Adjust Menu
PC Adjust Menu icon
Move the red frame pointer to
the Auto PC Adj. icon and
press the SELECT button.
Computer Input
Computer Adjustment (Manual)
Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. This
projector has Manual PC Adjustment to enable you to precisely adjust several parameters to match those signal formats.
The projector has 5 independent memory areas to memorize those parameters manually adjusted. This enables you to
recall the setting for a specific computer whenever you use it.
1
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the PC Adjust Menu icon.
2
Press the Point Down button to move the red frame pointer to
the item that you want to adjust and then press the SELECT
button. An adjustment dialog box will appear. Press the Point
Left/Right button to adjust value.
Fine sync
PC Adjust Menu
PC Adjust Menu icon
Move the red frame pointer to
an item and press the SELECT
button.
Adjusts an image as necessary to eliminate flicker from the display.
Press the Point Left/Right button to adjust value. (From 0 to 31)
Total dots
Adjusts the number of total dots in one horizontal period. Press the
Point Left/Right button and adjust number to match your PC image.
Selected Mode
Shows status
(Stored / Free) of the
selected Mode.
Horizontal
Adjusts horizontal picture position. Press the Point Left/Right button
to adjust the position.
Vertical
Press the Point Left/Right
button to adjust the value.
Adjusts vertical picture position. Press the Point Left/Right button to
adjust the position.
Current mode
Press the SELECT button at
this icon to display other items.
Press the SELECT button to show the information of the connected
computer.
Clamp
Adjusts clamp level. When the image has dark bars, try this
adjustment.
Current mode
Press the SELECT button at
the Current mode icon to
show the information of the
connected computer.
Press the SELECT button at
this icon to jump to the top
item.
27
Computer Input
Display area
Select the resolution at the Display area dialog box.
Press the SELECT button at
the Display area icon and the
Display area dialog box
appears.
Display area H
Adjusts the horizontal area displayed by this projector. Press the
Point Left/Right button to decrease/increase value and then press the
SELECT button.
Display area
Display area V
Adjusts the vertical area displayed by this projector. Press the Point
Left/Right button to decrease/increase value and then press the
SELECT button.
Full screen
When this function is on, SXGA image is fully displayed at 4 : 3 aspect
ratio. It is displayed at 5 : 4 aspect ratio with this function off.
Reset
Resets all adjustment to their previous levels.
To store adjustment data
Store
This Mode has parameters being stored.
To store adjustment data, move the red frame pointer to the Store
icon and then press the SELECT button. Move the red arrow pointer
to any of Mode 1 to 5 in which you want to store and then press the
SELECT button.
Mode free
To clear adjustment data previously set, move the red frame pointer
to the Mode free icon and then press the SELECT button. Move the
red arrow pointer to the Mode that you want to clear and then press
the SELECT button.
Quit
Vacant Mode
shows values of “Total dots,”
“Horizontal,” “Vertical,”
“Display area H,” and “Display
area V.”
Closes the PC Adjust Menu.
To clear adjustment data
closes this dialog box.
NOTE
● Auto PC Adjust, Display area, Display area (H/V), and Full screen cannot be
selected when “480i”, “575i”, “480p”, “575p”, “720p”, “1035i”, or
“1080i” is selected in the PC System Menu (p25).
28
Computer Input
Image Level Selection
Direct Operation
Select an image level among Standard, Real, Image 1, Image 2, Image
3, and Image 4 by pressing the IMAGE button on the remote control.
IMAGE button
Standard
Real
Standard
Normal picture level preset on this projector.
Image 1
Real
Picture level with improved halftone for graphics.
Image 2
IMAGE 1~4
User preset image in the Image Adjust Menu (p30).
Image 3
Image 4
Menu Operation
1
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the Image Select Menu icon.
2
Press the Point Down button to move the red frame pointer to
the level that you want to set and then press the SELECT
button.
Standard
Normal picture level preset on this projector.
Image Select Menu
Image Select Menu icon
Move the red frame pointer to
the level and press the
SELECT button.
Real
Picture level with improved halftone for graphics.
IMAGE 1~4
The level being selected.
User preset image in the Image Adjust Menu (p30).
29
Computer Input
Image Level Adjustment
1
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the Image Adjust Menu icon.
2
Press the Point Down button to move the red frame pointer to
the item that you want to adjust, and then press the SELECT
button. The level of each item is displayed. Adjust each level by
pressing the Point Left/Right button.
Contrast
Image Adjust Menu
Image Adjust Menu icon
Move the red frame pointer to
the item to be selected and
then press the SELECT button.
Press the Point Left button to decrease contrast and the Point Right
button to increase contrast. (From 0 to 63.)
Brightness
Press the Point Left button to adjust image darker and the Point Right
button to adjust image brighter. (From 0 to 63.)
Color temp.
Selected Image level
Press the Point Left button or the Point Right button for Color temp.
level that you want to select. (XLow, Low, Mid, or High)
White balance (Red)
Press the Point Left button to lighten red tone and the Point Right
button to deepen red tone. (From 0 to 63.)
Press the Point Left/Right button to adjust value.
White balance (Green)
Press the Point Left button to lighten green tone and the Point Right
button to deepen green tone. (From 0 to 63.)
White balance (Blue)
Press the Point Left button to lighten blue tone and the Point Right
button to deepen blue tone. (From 0 to 63.)
Sharpness
Store icon
Press the SELECT button at
this icon to store the adjustment.
Press the Point Left button to soften the image and the Point Right
button to sharpen the image. (From 0 to 15.)
Gamma
Press the Point Left/Right button to obtain better balance of contrast.
(From 0 to 15.)
Reset
Resets all adjustment to their previous levels.
Store
To store the image data adjusted manually, move the red frame
pointer to the Store icon and press the SELECT button. The Image
Level Menu will appear. Move the red frame pointer to the Image 1
to 4 where you want to set and then press the SELECT button.
Quit
Closes the Image Adjust Menu.
30
Image Level Menu
Move the red frame pointer to
any of Image 1 to 4 where you
want to set and then press
the SELECT button.
Computer Input
Screen Size Adjustment
This projector has a picture screen resize function, which enables you to display the desirable image size.
1
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the Screen Menu icon.
2
Press the Point Down button and move the red frame pointer to
the function that you want to select and then press the SELECT
button.
Normal
Screen Menu
Screen Menu icon
Move the red frame to the
function and press the SELECT
button.
Provides image to fit screen size.
True
Provides image in its original size. When the original image size is
larger than the screen size (1024 x 768), this projector enters “Digital
zoom +” mode automatically.
Wide
Provides image to fit wide video aspect ratio (16 : 9) by expanding
image width uniformly. This function can be used for providing a
squeezed video signal at 16 : 9.
Digital zoom +
When the Digital zoom + is selected, the On-Screen Menu disappears
and the message “D. Zoom +” is displayed. Press the SELECT
button to expand the image size. And press the Point
Up/Down/Left/Right button to pan the image. The Panning function
can work only when the image is larger than the screen size.
A projected image can be also expanded by pressing the D.ZOOM ▲
button on the remote control.
NOTE
● This Screen Menu cannot be operated when “720p
(HDTV)”, “1035i (HDTV)”, or “1080i (HDTV)” is
selected in the PC System Menu (p25).
● The True and Digital zoom +/– cannot be selected
when “480i”, “575i”, “480p”, or “575p” is selected
in the PC System Menu (p25).
● This projector cannot display any resolution higher
than 1280 X 1024. If your computer’s screen
resolution is higher than 1280 X 1024, reset the
resolution to the lower before connecting to the
projector.
● The image data in other than XGA (1024 x 768) is
modified to fit the screen size in initial mode.
● The panning function may not operate properly if the
computer system prepared in the PC Adjust Menu is
used.
Digital zoom –
When the Digital zoom – is selected, the On-Screen Menu disappears
and the message “D. Zoom –” is displayed. Press the SELECT button
to compress the image size.
A projected image can be also compressed by pressing the D.ZOOM
▼ button on the remote control.
To cancel the Digital Zoom +/– mode, press any button except the
D.ZOOM ▲/▼, SELECT, R-CLICK, and Point button.
31
Video Input
Input Source Selection (Video, S-Video)
Direct Operation
Choose Video by pressing the INPUT button on the top control or the
VIDEO button on the remote control.
Before using these buttons, correct input source should be selected
through menu operation as described below.
INPUT button
Video
Computer 1
Computer 2
✽
VIDEO button
Video
✽ When Monitor out is selected at the Terminal item
in the Setting Menu, Computer 2 is not displayed.
Menu Operation
1
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the Input Menu icon.
2
Press the Point Down button to move the red arrow pointer to
Video and then press the SELECT button. The Source Select
Menu will appear.
3
Move the pointer to the source that you want to select and then
press the SELECT button.
Auto
When selecting Auto, the projector automatically detects
incoming video signal, and adjusts itself to optimize its
performance. The projector selects connection in the
following order:
1st S-Video
2nd Video
The S-VIDEO jack has priority over the VIDEO jack under
the condition of connecting both the S-VIDEO jack and
the VIDEO jack.
Video
When video input signal is connected to the VIDEO jack,
select Video.
S-Video
When video input signal is connected to the S-VIDEO
jack, select S-Video.
NOTE
● See “Computer Input” on page 24 for a signal compatible with HDCP.
32
Input Menu
VIDEO
Move the pointer to
Video and press the
SELECT button.
Source Select Menu (VIDEO)
Move the pointer to the source that you want to select
and press the SELECT button.
✽ When Monitor out is selected at the Terminal item in the
Setting Menu, Computer 2 is not displayed.
Video Input
Input Source Selection (Component, RGB Scart 21-Pin)
Direct Operation
Choose Computer 2 by pressing the INPUT button on the top control
or press the COMPUTER button on the remote control.
Before using these buttons, correct input source should be selected
through menu operation as described below.
INPUT button
Computer 1
✽
Computer 2
Video
COMPUTER button
Computer 1
Computer 2
✽
✽ Computer 2 is not displayed when the COMPUTER IN
2/COMPONENT IN/MONITOR OUT terminal is used as
Monitor out.
Menu Operation
1
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the Input Menu icon.
2
Press the Point Down button to move the red arrow pointer to
Computer 2 (Only the Computer 1 is displayed when Monitor
out is selected in the Setting Menu.), and then press the
SELECT button. The Source Select Menu will appear.
3
Move the pointer to the correct input source and then press the
SELECT button.
Component
RGB (Scart)
When the input source is coming from video
equipment connected to the COMPUTER IN
2/COMPONENT IN/MONITOR OUT terminal with a
Component-VGA Cable, select Component.
When the input source is coming from video
equipment connected to the COMPUTER IN
2/COMPONENT IN/MONITOR OUT terminal with a
Scart-VGA Cable, select RGB (Scart).
Input Menu
Input Menu icon
Move the pointer (red arrow)
to Computer 2 and press the
SELECT button.
Computer
2
Source Select Menu
Move the pointer to
Component or RGB (Scart )
and press the SELECT button.
NOTE
● Component-VGA Cable and Scart-VGA Cable are optionally supplied. See
page 53 for order.
33
Video Input
Video System Selection
1
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the AV System Menu icon.
2
Press the Point Down button to move the red arrow pointer to
the system that you want to select and then press the SELECT
button.
Video or S-Video
Auto
The projector automatically detects incoming video system, and
adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select system manually.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
If the projector cannot reproduce proper video image, it is necessary
to select a specific broadcast signal format among PAL, SECAM,
NTSC, NTSC 4.43, PAL-M, and PAL-N.
AV System Menu (Video or S-Video)
AV System Menu icon
This box indicates the system
being selected.
Move the pointer to a system
and press the SELECT button.
Component
Auto
The projector automatically detects incoming video signal, and adjusts
itself to optimize its performance.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image, it is necessary
to select a specific component video signal format among 480i, 575i,
480p, 575p, 720p, 1035i, and 1080i.
NOTE
● The AV System Menu cannot be selected when selecting RGB(Scart).
34
AV System Menu (Component)
AV System Menu icon
This box indicates the system
being selected.
Move the pointer to a system
and press the SELECT button.
Video Input
Image Level Selection
Direct Operation
Select an image level among Standard, Cinema, Image 1, Image 2,
Image 3, and Image 4 by pressing the IMAGE button on the remote
control.
IMAGE button
Standard
Cinema
Standard
Normal picture level preset on this projector.
Image 1
Cinema
Picture level adjusted for the picture with fine tone.
Image 2
IMAGE 1~4
User preset image in the Image Adjust Menu (p36, 37).
Image 3
Image 4
Menu Operation
1
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the Image Select Menu icon.
2
Press the Point Down button to move the red frame pointer to
the level that you want to set and then press the SELECT
button.
Image Select Menu
Image Select
Menu icon
Standard
Normal picture level preset on this projector.
Cinema
Picture level adjusted for the picture with fine tone.
IMAGE 1~4
Move the red frame pointer to a level
and press the SELECT button.
The level being selected.
User preset image in the Image Adjust Menu (p36, 37).
35
Video Input
Image Level Adjustment
1
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the Image Adjust Menu icon.
2
Press the Point Down button to move the red frame pointer to
the item that you want to adjust and then press the SELECT
button. The level of each item is displayed. Adjust each level by
pressing the Point Left/Right button.
Contrast
Image Adjust Menu
Image Adjust Menu icon
Move the red frame pointer to
the item to be selected and
then press the SELECT button.
Press the Point Left button to decrease contrast and the Point Right
button to increase contrast. (From 0 to 63.)
Brightness
Press the Point Left button to adjust image darker and the Point Right
button to adjust image brighter. (From 0 to 63.)
Color
Press the Point Left button to lighten color and the Point Right button
to deepen color. (From 0 to 63.)
Tint
Press the Point Left/Right button to obtain proper color. (From 0 to
63.)
Press the Point Left/Right button to adjust value.
Color temp.
Press the Point Left/Right button for Color temp. level that you want
to select. (XLow, Low, Mid, or High)
Press the SELECT button at
this icon to display other items.
White balance (Red)
Press the Point Left button to lighten red tone and the Point Right
button to deepen red tone. (From 0 to 63.)
White balance (Green)
Press the SELECT button at
this icon to display previous
items.
Press the Point Left button to lighten green tone and the Point Right
button to deepen green tone. (From 0 to 63.)
White balance (Blue)
Press the Point Left button to lighten blue tone and the Point Right
button to deepen blue tone. (From 0 to 63.)
Sharpness
Press the Point Left button to soften the image and the Point Right
button to sharpen the image. (From 0 to 15.)
Gamma
Press the Point Left/Right button to obtain better balance of contrast.
(From 0 to 15.)
Press the SELECT button at
this icon to store the value.
Progressive
Interlace video signal can be displayed in a progressive picture.
Off ···· Not activated.
L1 ···· Select “L1” for an active picture.
L2 ···· Select “L2” for a still picture.
36
NOTE
● The Tint cannot be adjusted when the video system
is PAL, SECAM, PAL-M, or PAL-N.
● Progressive cannot be selected when 480p, 575p,
720p, 1035i, or 1080i is selected.
Video Input
Reset
Resets all adjustment to their previous figure.
Store
To store the adjustment data, move the red frame pointer to the Store
icon and press the SELECT button. The Image Level Menu will
appear. Move the red frame pointer to the Image Level 1 to 4 and
then press the SELECT button.
Image Level Menu
Move the red frame pointer
to an image icon to be set
and then press the SELECT
button.
Quit
Closes the Image Adjust Menu.
Store icon
Screen Size Adjustment
This projector has a picture screen resize function, which enables you to display the desirable image size.
1
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the Screen Menu icon.
2
Press the Point Down button and move the red frame pointer to
the function that you want to select and then press the SELECT
button.
Screen Menu
Screen Menu icon
Move the red frame to a function and
press the SELECT button.
Normal
Provides image at a normal video aspect ratio of 4 : 3.
Wide
Provides image at a wide screen ratio of 16 : 9.
NOTE
● Screen Menu cannot be operated when “720p”, “1035i”, or “1080i” is
selected in the AV System Menu (p34).
37
Setting
Setting
1
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the Setting Menu icon.
2
Press the Point Down button to move the red frame pointer to
the item that you want to set and then press the SELECT
button. The Setting dialog box appears.
Setting Menu (Language)
Set the red frame
pointer to the item
and press the
SELECT button.
Setting Menu icon
Language
The language used in the On-Screen Menu is available in English,
German, French, Italian, Spanish, Portuguese, Dutch, Swedish,
Russian, Chinese, Korean, or Japanese.
Keystone
This function corrects distortion of a projected image. Select either
Store or Reset with the Point Left/Right button, and then press the
Select button. The keystone dialog box appears. Adjust keystone
with the Point Up/Down/Left/Right button.
Store ···· stores the keystone adjustment even if the AC power
cord is disconnected.
Reset ····resets the keystone adjustment when the AC power cord
is disconnected.
When pressing the SELECT
button at Language, the
Language Menu appears.
Blue back
When this function is “On,” the projector produces a blue image
while input signal is not detected.
Display
This function decides whether to display On-Screen Displays.
On ···· shows all the On-Screen Displays.
Off ···· does not show On-Screen Displays except;
● On-Screen Menu
● “Power off?” message
● P-Timer
● “No signal” message
●”Wait a moment!” message
Capture
Logo
This function decides what to be displayed when starting up.
User
···· the image you captured
Default ···· the factory-set logo
Off
···· count-down only
Capture
This function is used to capture the image being projected and use it
for a starting-up display or interval of presentations. After capturing
the projected image, go to the Logo function (above) and set it as
“User”. Then the captured image will be displayed when turning on
the projector next time or pressing the NO SHOW button. (p21)
To capture the image, select [Yes]. To cancel the Capture function,
select [No].
Before capturing an image, select Standard in the Image Select Menu
to capture a proper image. (See page 29, 35.)
A signal from a computer can be captured up to XGA(1024 x 768). A
signal from video equipment can be captured except for 720p, 1035i,
and 1080i. When capturing the image that has been adjusted by the
Keystone function, the adjustment data is automatically reset and the
projector captures an image without keystone adjustment.
38
Select [Yes] to
capture the
projected image.
Select [Yes] to
stop capturing.
Setting
Ceiling
Ceiling
When this function is “On,” the picture is top/bottom and left/right
reversed. This function is used to project the image from a ceiling
mounting the projector.
Rear
When this function is “On,” the picture is left/right reversed. This
function is used to project the image to a rear projection screen.
Rear
Terminal
The COMPUTER IN 2/COMPONENT IN/MONITOR OUT terminal on
the back of the projector can be used as computer input or monitor
output by switching Terminal with the Point Left/Right button.
To use the terminal as computer input, Component video input, or
RGB Scart 21-Pin Video input, select Computer 2. To use the terminal
as monitor out, select Monitor out.
Terminal cannot be switched into Monitor out after selecting
Computer 2. In this case, select other input source such as Computer
1 or Video, and you will select Terminal.
Standby mode
Standby mode
This function is available when using Multi Card Imager optionally
supplied, and it reduces standby energy when selecting Eco.
Eco
···· reduces standby energy.
Normal ···· consumes normal standby energy.
Power management
For reducing power consumption as well as maintaining the lamp life,
the Power management function turns off the projection lamp when
the input signal is interrupted and no button is pressed for 30 seconds
or more.
When the input signal is interrupted and no button is pressed for 30
seconds or more, the timer display with the message "No signal"
appears on the screen. The count-down starts for the time to have
been set. The count-down time can be set between 1 and 30
minutes.
When the count-down time has elapsed, the lamp will be turned off to
cool itself down. The POWER indicator is flashing red during this
cooling-off period. The next performance depends on setting as
follows.
Ready ······ When the lamp has been fully cooled down, the
POWER indicator changes to green flashing. In this
condition, the projection lamp will be turned on if the
input signal is reconnected or any button on the top
control or remote control is pressed.
Shutdown···· When the lamp has been fully cooled down, the
power will be turned off.
Off ···············The Power management function is canceled.
On start
When this function is “On,” the projector is automatically turned on
just by connecting the AC power cord to a wall outlet.
NOTE
● Be sure to turn the projector off properly (see “Turning Off the Projector”
on page 19). If the projector is turned off in the wrong steps, the On start
function does not operate properly.
Press the SELECT button at this
icon to display other items.
Power management
Time left until Lamp
off
Press the SELECT button at
Power management and this
box appears. Choose one of
three settings with the Point
Left/Right button, and go to the
timer with the Point Up/Down
button and set time with the
Point Left/Right button.
39
Setting
Lamp mode
Pointer
This function allows you to change brightness of the screen.
···· normal brightness
···· the controlled brightness according with input signal
···· lowers brightness and reduces the lamp power
consumption.
Select Spotlight or
Pointer with the Point
Up/Down button and
press the SELECT
button. Then select size
or pattern with the Point
Left/Right button.
Pointer
You can emphasize a part of the projected image with this function.
Choose either Spotlight or Pointer with the Point Up/Down button
and press the SELECT button. Then select one of three different
sizes (Large, Middle, and Small) of Spotlight or a pointer of three
different patterns (Arrow, Finger, and Dot) of Pointer. (See page 13
for operation.)
Remote control
Remote control
This projector provides eight different remote control codes (Code 1Code 8); the factory-set, initial code (Code 1) and the other seven
codes (Code 2 to Code 8). This switching function prevents remote
control interference when operating several projectors or video
equipment at the same time.
For example operating the projector in “Code 7”, both the projector
and the remote control must be switched to “Code 7”.
To change the code for the projector;
Select a remote control code in this Setting Menu.
To change the code for the remote control;
While holding down the MENU button, press the IMAGE button
number of times corresponding to the remote control code for the
projector. (See page 14 for details.)
Key lock
When pressing the SELECT button
at Remote control, the remote
control code menu appears.
Key lock
This function locks operation of the top control and remote control.
It is useful to prevent operation by a third person.
···· not locked.
···· locks operation of the top control. To unlock, use the
remote control.
···· locks operation of the remote control. To unlock, use the
top control.
Select Key lock and
this box appears.
Choose one of
these with the
Point Up/Down
button and select
[Yes] to activate it.
If the top control accidentally becomes locked and you do not have
the remote control nearby, disconnect the AC power cord to turn off
the power, and then while pressing the SELECT button, connect the
AC power cord again. This will cancel the top control lock.
Factory default
Lamp counter reset
This function is used to reset the lamp replace counter. When
replacing the projection lamp, reset the lamp replace counter by
using this function. See page 44 for operation.
Factory default
This function returns all setting values except for the lamp counter to
the factory default settings.
Select Factory
default and this box
appears. Select
[Yes] , and the next
box appears.
Select [Yes] to
activate it.
40
Maintenance and Cleaning
Warning Indicator
The WARNING indicator shows the state of the function which protects the projector. Check the state of the WARNING
indicator and the POWER indicator to take proper maintenance.
The projector is shut down and the WARNING indicator is flashing red
TOP CONTROL
WARNING
LECT
NOTE
● After the temperature inside the projector returns to normal, the WARNING
indicator still continues to flash. When the projector is turned on again, the
WARNING indicator stops flashing.
UME +
VOL
When the temperature inside the projector exceeds the normal
temperature, the projector is automatically shut down to protect the
inside of the projector. The POWER indicator is flashing and the
projector is being cooled down. When the temperature inside the
projector returns to normal, the POWER indicator lights red and the
projector can be turned on.
LAMP
REPLACE
WARNING
flashing red
Then check the items below.
✓ Did you provide appropriate space for the projector to be
ventilated? Check the installing condition to see if ventilation slots
are not blocked.
✓ Is the projector not installed near the ventilation duct of airconditioning equipment which may be hot? Install the projector
away from the ventilation duct of air-conditioning equipment.
✓ Are the air filters clean? Clean the air filters periodically.
The projector is shut down and the WARNING indicator lights red
TOP CONTROL
WARNING
LECT
UME +
VOL
When the projector detects an abnormal condition, it is automatically
shut down to protect the inside and the WARNING indicator lights
red. In this case, disconnect the AC power cord and reconnect it, and
then turn the projector on once again for check. If the projector is still
turned off and the WARNING indicator lights red, disconnect the AC
power cord and contact the service station for check and repair.
LAMP
REPLACE
WARNING
lights red
CAUTION
DO NOT LEAVE THE PROJECTOR WITH THE AC POWER
CORD CONNECTED UNDER THE ABNORMAL
CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC
SHOCK.
41
Maintenance and Cleaning
Cleaning the Air Filters
Air filters prevent dust from accumulating on the surface of the optical elements inside the projector. Should the air filters
become clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat build up and
adversely affect the life of the projector. Clean the air filters following the steps below.
1
Turn off the projector, and disconnect the AC power cord from
the AC outlet.
2
Turn the projector upside down and remove the air filters by
pulling the latches upward.
3
4
Clean the air filters with a brush or rinse them softly.
When cleaning the air filters by rinsing, dry them well. Replace
the air filters properly. Make sure that the air filters are fully
inserted.
CAUTION
Do not operate the projector with the air filters removed.
Dust may accumulate on the LCD panel and the projection
mirror degrading picture quality.
Do not put small parts into the air intake vents. It may
result in malfunction of the projector.
Air Filter
Pull up and remove.
RECOMMENDATION
We recommend avoiding dusty/smoky environments when operating the projector. Usage in these environments
may cause poor image quality.
When using under dusty or smoky conditions, dust may accumulate on a lens, LCD panels, or optical elements inside the
projector. This condition may degrade the quality of a projected image.
When the above symptoms are noticed, contact your authorized dealer or service station for proper cleaning.
Cleaning the Projection Lens
Follow these steps to clean the projection lens.
1
Disconnect the AC power cord before cleaning.
2
Softly wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner, or use
lens cleaning paper or a commercially available air blower to
clean the lens. Avoid using an excessive amount of cleaner.
Abrasive cleaners, solvents, or other harsh chemicals might
scratch the surface.
3
When the projector is not in use, replace the lens cover.
Cleaning the Projector Cabinet
Follow these steps to clean the projector cabinet.
42
1
Disconnect the AC power cord before cleaning.
2
Softly wipe the projector body with a soft, dry cleaning cloth.
When it is heavily soiled, use a small amount of mild detergent
and finish with a soft, dry cleaning cloth. Avoid using an
excessive amount of cleaner. Abrasive cleaners, solvents, or
other harsh chemicals might scratch the surface.
3
When the projector is not in use, put the projector in the carrying case to protect it from dust and scratches.
Maintenance and Cleaning
Lamp Replacement
When the life of the projection lamp of this projector draws to an end,
the LAMP REPLACE indicator lights yellow. If this indicator lights
yellow, replace the lamp with a new one promptly.
Top Control
POWER
SELECT
UME +
VOL
CAUTION
UM
VOL E –
WARNING
This indicator lights yellow
when the life of the projection
lamp draws to an end.
LAMP
REPLACE
CAUTION
Allow a projector to cool, for at least 45 minutes before
you open the Lamp cover. The inside of the projector
can become very hot.
For continued safety, replace with a lamp of the same
type. Do not drop a lamp or touch a glass bulb! The
glass can shatter and may cause injury.
Screw
Lamp Cover
Follow these steps to replace the lamp.
1
Turn off the projector and disconnect the AC plug. Allow the
projector to cool for at least 45 minutes.
2
Loosen the screw with a screwdriver, and remove the lamp
cover.
3
Loosen 2 screws of the lamp with a screwdriver and pull out the
lamp by grasping the handle.
4
Replace the lamp with a new one and tighten the 2 screws back
into position. Make sure that the lamp is set properly. Replace
the lamp cover and tighten the screw.
5
Connect the AC power cord to the projector and turn on the
projector.
6
Reset the Lamp replace counter.
See “Lamp Replace Counter” on the next page .
Lamp
Screw
Screw
Handle
ORDER REPLACEMENT LAMP
Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following
information to the dealer.
●
Model No. of your projector
● Replacement Lamp Type No.
:
:
PLC-XU55A/PLC-XU50A
POA-LMP65
(Service Parts No. 610 307 7925)
43
Maintenance and Cleaning
Lamp Replace Counter
Be sure to reset the lamp replace counter after the lamp is replaced. When the lamp replace counter is reset, the LAMP
REPLACE indicator stops lighting.
1
Turn the projector on, press the MENU button and the OnScreen Menu will appear. Press the Point Left/Right button
to move the red frame pointer to the Setting Menu icon.
2
Press the Point Down button to move the red frame pointer
to the Lamp counter reset item and then press the SELECT
button. The message "Lamp replace counter Reset?" is
displayed. Move the pointer to [Yes] and then press the
SELECT button.
3
Another confirmation dialog box appears and select [Yes] to
reset the Lamp replace counter.
NOTE
● Do not reset the Lamp replace counter without implementation of lamp
replacement. Be sure to reset the Lamp replace counter only after
replacing the lamp.
Move the pointer to Lamp counter reset
and then press the SELECT button. The
message “Lamp replace counter Reset?” is
displayed.
LAMP HANDLING PRECAUTIONS
This projector uses a high-pressure lamp which must be handled carefully and properly. Improper
handling may result in accidents, injury, or create a fire hazard.
● Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is no
guarantee of the same lifetime for each lamp. Some lamps may fail or terminate their lifetime in a
shorter period of time than other similar lamps.
● If the projector indicates that the lamp should be replaced, i.e., if the LAMP REPLACE indicator lights
up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down.
( Follow carefully the instructions in the Lamp Replacement section of this manual. ) Continuous use
of the lamp with the LAMP REPLACE indicator lighted may increase the risk of lamp explosion.
● A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its
lifetime draws to an end. Risk of explosion may differ according to the environment or conditions in
which the projector and lamp are being used.
IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN.
If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. Contact an
authorized service station for a checkup of the unit and replacement of the lamp. Additionally, check
carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out
from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one
should check the inside of the projector except those who are authorized trained technicians and who are
familiar with projector service. Inappropriate attempts to service the unit by anyone, especially those
who are not appropriately trained to do so, may result in an accident or injury caused by pieces of broken
glass.
44
Appendix
Troubleshooting
Before calling your dealer or service center for assistance, check the items below once again.
– Make sure you have properly connected the projector to peripheral equipment as described in "Connecting to a Computer"
and “Connecting to Video Equipment” on page17 and 18.
– Make sure all equipment is connected to AC outlet and the power is turned on.
– When you operate the projector with a computer and it does not project an image, restart the computer.
Problem:
No power
Image is out of focus.
– Try these solutions.
– Plug the power cord of the projector into the AC outlet.
– See if the POWER indicator lights red.
– Wait 90 seconds after the projector is turned OFF when turning the projector back on.
The projector can be turned on after the POWER indicator turns red. (See “Turning Off
the Projector” on page 19.)
– Check the WARNING indicator. If the WARNING indicator lights red, the projector cannot
be turned on. (See "Warning Indicator" on page 41.)
– Check the projection lamp. (See page 43.)
– Unlock Key lock for the projector in the Setting Menu. (See page 40.)
–
–
–
–
Adjust focus of the projector.
Provide proper distance between the projector and the projection screen. (See page 16.)
Check the projection lens to see if it needs cleaning. (See page 42.)
Moving the projector from a cool temperature location to a warm temperature location
may result in moisture condensation on the projection lens. In such an event, leave the
projector OFF and wait until condensation disappears.
No image
– Check the connection between your computer or video equipment and the projector.
– See if the input signal is correctly output from your computer. Some laptop computers
may need changing the setting for monitor output when you are connecting a laptop
computer. See your computer’s owner’s manual for setting.
– It takes about 30 seconds to display an image after turning on the projector.
– See if the selected system is corresponding with your computer or video equipment.
– Select correct input source once again through menu operation.
– Make sure the temperature is not out of the Operating Temperature (5°C ~ 35°C).
No sound
–
–
–
–
Image is Left/Right
reversed.
Check audio cable connection from audio input source.
Adjust the audio source.
Press the Volume (+) button.
Press the Mute button.
– Check the Ceiling / Rear item. (See “Setting” on page 39.)
Image is Top/Bottom
reversed.
– Check the Ceiling item. (See “Setting” on page 39.)
Some displays are not
seen during the
Operation.
– Check the Display item. (See “Setting” on page 38.)
45
Appendix
Problem:
– Try these solutions.
Computer 2 cannot be
selected.
– Select Computer 2 at the Terminal item in the Setting Menu. (See “Terminal” on page
39.)
The Terminal item
cannot be selected.
– The Terminal item in the Setting Menu cannot be selected after Computer 2 is selected.
Select other input source such as Computer 1 or Video with the INPUT button on the top
control, the COMPUTER button or the VIDEO button on the remote control so that the
Terminal item can be selected.
The Remote Control
does not work.
– Check the batteries.
– Make sure no obstruction is between the projector and remote control.
– Make sure you are not too far from the projector when using the remote control.
Maximum operating range is 16.4’ (5m).
– Make sure the code of the remote control is conformed to the projector. (See page 14,
40.)
– Unlock Key lock for the remote control in the Setting Menu. (See page 40.)
Wireless Mouse function
does not work.
– Make sure your computer is connected to the projector with a USB cable.
– Check cable connection between the projector and your computer.
– Check the mouse setting on your computer.
WARNING :
High voltages are used to operate this projector. Do not attempt to open the cabinet.
If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the
service center. Give the model number and explain about the problem. We will advise you how to obtain service.
This symbol on the nameplate means the product is Listed by Underwriters Laboratories
Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of
fire, casualty and electrical hazards.
The CE Mark is a Directive conformity mark of the European Community (EC).
46
Appendix
Indicators and Projector Condition
Check the indicators for projector condition.
Indicators
POWER
WARNING
LAMP
REPLACE
red/green
red
yellow
Projector Condition
The projector is OFF. (The AC power cord is unplugged.)
• • • lights green.
✽
The projector is preparing for stand-by or the projection lamp is being
cooled down. The projector cannot be turned on until cooling is completed.
✽
The projector is ready to be turned on with the POWER ON-OFF button.
✽
The projector is operating normally.
✽
The projector is in the Power management mode.
✽
The temperature inside the projector is abnormally high. The projector cannot be turned on. When the projector is cooled down enough and the
temperature returns to normal, the POWER indicator lights red and the projector can be turned on. (The WARNING indicator keeps flashing.) Check
and clean the Air filter.
✽
The projector has been cooled down enough and the temperature returns
to normal. When turning on the projector, the WARNING indicator stops
flashing. Check and clean the air filters.
✽
The projector detects an abnormal condition and cannot be turned on.
Unplug the AC power cord and plug it again to turn on the projector. If the
projector is turned off again, disconnect the AC power cord and contact the
dealer or the service center for service and checkup. Do not leave the projector on. It may cause electric shock or a fire hazard.
• • • flashes green.
• • • lights red.
• • • flashes red.
• • • off
✽ When
the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights
yellow, replace the projection lamp with a new one promptly. Reset the Lamp replace counter after replacement of the lamp.
See page 43 and 44.
47
Appendix
Menu Tree
Computer Input / Video Input
Input
Computer 1
RGB( Analog )
Go to System (1)
RGB( PC Digital )
N/A
RGB( AV HDCP )
N/A
RGB
Go to System (1)
Component
Go to System (2)
Computer 2
Video
RGB( Scart )
N/A
Auto
Go to System (3)
Video
Go to System (3)
S-Video
Go to System (3)
✽N/A - - - not applicable
Computer Input
System (1)
MODE 1
MODE 2
SVGA 1
----
Image Select
Standard
Real
Image 1
Image 2
Image 3
Image 4
Image Adjust
Contrast
Brightness
Color Temp
0 - 63
0 - 63
High
Mid
Low
XLow
Red
Green
Blue
Sharpness
Gamma
Reset
Store
0 - 63
0 - 63
0 - 63
0 - 15
0 - 15
Yes / No
Image 1
Image 2
Image 3
Image 4
Quit
✽Systems displayed in the System Menu vary
depending on an input signal.
PC Adjust
Auto PC Adj.
Fine sync.
Total dots
Horizontal
Vertical
Current mode
Clamp
Display area
Display area - H
Display area - V
Full screen
Reset
Mode free
Store
Quit
48
0 - 31
640 x 480
720 x 400
800 x 600
1024 x 768
1152 x 864
1280 x 1024
1400 x 1050
Quit
On / Off
Yes / No
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Quit
Quit
Screen
Normal
True
Wide
Digital zoom +
Digital zoom –
Appendix
Setting
Video Input
System (2)
Auto
1080i
1035i
720p
575p
480p
575i
480i
System (3)
Image Select
Image Adjust
Volume
Mute
Quit
0 - 63
On / Off
Setting
Language
English
German
French
Italian
Spanish
Portuguese
Dutch
Swedish
Russian
Chinese
Korean
Japanese
Quit
Keystone
Blue back
Display
Store / Reset
On / Off
On / Off
Logo
Standby mode
Off
User
Default
Yes/No
On / Off
On / Off
Computer 2
Monitor out
Eco/Normal
Power management
Off
Auto
PAL
SECAM
NTSC
NTSC 4.43
PAL-M
PAL-N
Standard
Cinema
Image 1
Image 2
Image 3
Image 4
Contrast
Brightness
Color
Tint
Color Temp
Red
Green
Blue
Sharpness
Gamma
Progressive
Reset
Store
Quit
Screen
Sound
0 - 63
0 - 63
0 - 63
0 - 63
High
Mid
Low
XLow
0 - 63
0 - 63
0 - 63
0 - 15
0 - 15
Off
L1
L2
Yes / No
Image 1
Image 2
Image 3
Image 4
Quit
Capture
Ceiling
Rear
Terminal
Ready
Shut down
1-30 Min
Quit
On start
Lamp mode
On / Off
Normal
Auto
Eco
Pointer
Spotlight
Pointer
Code 1
Code 2
Code 3
Code 4
Code 5
Code 6
Code 7
Code 8
Quit
Remote control
Normal
Wide
Key lock
Off
Projector
Remote Control
Quit
Lamp counter reset
Factory default
Yes / No
Yes / No
49
Appendix
Compatible Computer Specifications
This projector can basically accept the signal from all computers with the V, H-Frequency mentioned below and less than 140
MHz of Dot Clock.
ON-SCREEN
DISPLAY
VGA 1
VGA 2
VGA 3
VGA 4
VGA 5
VGA 6
VGA 7
MAC LC13
MAC 13
575i
480i
SVGA 1
SVGA 2
SVGA 3
SVGA 4
SVGA 5
SVGA 6
SVGA 7
SVGA 8
SVGA 9
SVGA 10
SVGA 11
MAC 16
XGA 1
XGA 2
XGA 3
XGA 4
XGA 5
XGA 6
XGA 7
XGA 8
XGA 9
XGA 10
XGA 11
RESOLUTION
640 x 480
720 x 400
640 x 400
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
––––––––
––––––––
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
H-Freq.
(kHz)
31.47
31.47
31.47
37.86
37.86
37.50
43.269
34.97
35.00
15.625
15.734
35.156
37.88
46.875
53.674
48.08
37.90
34.50
38.00
38.60
32.70
38.00
49.72
48.36
68.677
60.023
56.476
60.31
48.50
44.00
63.48
36.00
62.04
61.00
V-Freq.
(Hz)
59.88
70.09
70.09
74.38
72.81
75.00
85.00
66.60
66.67
50.00
(Interlace)
60.00
(Interlace)
56.25
60.32
75.00
85.06
72.19
61.03
55.38
60.51
60.31
51.09
60.51
74.55
60.00
84.997
75.03
70.07
74.92
60.02
54.58
79.35
87.17
(Interlace)
77.07
75.70
ON-SCREEN
DISPLAY
RESOLUTION
XGA 12
XGA 13
XGA 14
XGA 15
MAC 19
MAC 21
SXGA 1
SXGA 2
SXGA 3
SXGA 4
SXGA 5
SXGA 6
SXGA 7
SXGA 8
SXGA 9
SXGA 10
SXGA 11
SXGA 12
SXGA 13
SXGA 14
SXGA 15
SXGA 16
SXGA 17
SXGA 18
SXGA 19
SXGA 21
MAC
MAC
480p
575p
720p
1035i
1080i
1080i
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1152 x 870
1152 x 864
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 960
1152 x 900
1152 x 900
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1152 x 900
1280 x 1024
1280 x 1024
1400 x 1050
1280 x 960
1280 x 1024
––––––––
––––––––
––––––––
––––––––
––––––––
––––––––
H-Freq.
(kHz)
35.522
46.90
47.00
58.03
60.24
68.68
64.20
62.50
63.90
63.34
63.74
71.69
81.13
63.98
79.976
60.00
61.20
71.40
50.00
50.00
63.37
76.9
76.977
61.85
46.43
63.79
63.90
75.00
80.00
31.47
31.25
45.00
33.75
33.75
28.125
V-Freq.
(Hz)
H-Freq.
(kHz)
60.276
31.65
45.00
33.75
33.75
28.125
V-Freq.
(Hz)
58.069
29.80
60.00
86.96
(Interlace)
58.20
58.30
72.00
75.08
75.06
70.40
58.60
60.00
59.98
60.01
67.19
76.107
60.02
75.025
60.00
65.20
75.60
86.00
(Interlace)
94.00
(Interlace)
60.01
72.00
66.00
86.70
(Interlace)
60.18
60.00
75.08
75.08
59.88
50.00
60.00
60.00
(Interlace)
60.00
(Interlace)
50.00
(Interlace)
When an input signal is digital from DVI terminal, refer to the chart below.
ON-SCREEN
DISPLAY
D-VGA
D-480p
D-575p
D-SVGA
D-XGA
D-SXGA 1
50
RESOLUTION
640 x 480
––––––––
––––––––
800 x 600
1024 x 768
1280 x 1024
H-Freq.
(kHz)
31.47
31.47
31.25
37.879
43.363
63.98
V-Freq.
(Hz)
59.94
59.94
50.00
60.32
60.00
60.02
ON-SCREEN
DISPLAY
D-SXGA 2
D-SXGA 3
D-720p
D-1035i
D-1080i
D-1080i
RESOLUTION
1280 x 1024
1280 x 1024
––––––––
––––––––
––––––––
––––––––
60.00
(Interlace)
60.00
(Interlace)
50.00
(Interlace)
Appendix
Technical Specifications
Model No.
Projector Type
Dimensions (W x H x D)
Net Weight
LCD Panel System
Panel Resolution
Number of Pixels
Color System
High Definition TV Signal
Scanning Frequency
Projection Image size (Diagonal)
Projection Lens
Throw Distance
Projection Lamp
Video Input Jacks
Audio Input Jacks
Computer Input 1 Terminal
Computer Input 2 / Component Input /
Monitor Output Terminal
Computer / Component Audio Input Jack
Service Port Connector
USB Connector
Audio Output Jack
Internal Audio Amp
Built-in Speaker
Feet Adjustment
Voltage and
Power Consumption
Operating Temperature
Storage Temperature
Remote Control
Accessories
PLC-XU55A / PLC-XU50A
Multi-media Projector
11.73" x 2.8" x 8.58" (298mm x 71mm x 218mm) (not including raised portions)
6.2 lbs (2.8 kg)
0.8" TFT Active Matrix type, 3 panels
1,024 x 768 dots
2,359,296 (1,024 x 768 x 3 panels)
PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N
480i, 480p, 575i, 575p, 720p, 1035i, and 1080i
H-sync. 15 ~ 100 KHz, V-sync. 50 ~ 100 Hz
Adjustable from 40” to 300”
F 1.7 ~ 2.5 lens with f 20.0 mm ~ 30.0 mm with manual zoom and focus
3.3’ ~ 25.3’ (1.0 m ~ 7.7 m)
200 W
RCA Type x 1 (Video) and Mini DIN 4 pin x 1 (S-Video)
RCA Type x 2
DVI-I Terminal (Digital/Analog) (HDCP compatible)
(VGA) HDB 15 Terminal x 1 (switch to use this terminal)
Mini Jack (stereo) x 1
Mini DIN 8 pin x 1
USB Series B receptacle x 1
Mini Jack (stereo) x 1 (variable with volume)
1.0 W RMS
1 speaker, ø1.1" (28mm)
0˚ to 11.8˚
AC 100 ~ 120 V (3.6 A Max. Ampere), 50 / 60 Hz (The U.S.A and Canada)
AC 200 ~ 240 V (1.8 A Max. Ampere), 50 / 60 Hz (Continental Europe and The U.K.)
41 ˚F ~ 95 ˚F (5 ˚C ~ 35 ˚C)
14 ˚F ~ 140 ˚F (-10 ˚C ~ 60 ˚C)
Power Source
Operating Range
Dimensions
Net Weight
Laser Pointer
:
:
:
:
:
AA, UM3 or R06 Type x 2
16.4’ (5m) / ±30˚
2.0”(W) x 1.0”(H) x 7.1”(D) (50mm x 27mm x 181mm)
0.34 lbs (154 g) (including batteries)
Class II Laser (Max. Output : 1mW / Wave length : 640~660nm)
Owner’s Manual
AC Power Cord
Remote Control and Batteries
DVI-VGA Cable
USB Cable
Carrying Bag
Lens Cover
String for Lens Cover
● The specifications are subject to change without notice.
● LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a
tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.
● The On-Screen Menu and figures in this manual may differ slightly from the product.
51
Appendix
Configurations of Terminals
COMPUTER INPUT/COMPONENT INPUT/MONITOR OUTPUT TERMINAL (ANALOG)
Terminal : HDB15-PIN
Pin Configuration
4
5
10
15
14
2
3
9
8
13
1
7
12
1
2
3
4
5
6
7
8
6
11
Red Input
Green Input
Blue Input
Sense 2
Ground (Horiz.sync.)
Ground (Red)
Ground (Green)
Ground (Blue)
9
10
11
12
13
14
15
+5V Power
Ground (Vert.sync.)
Sense 0
DDC Data
Horiz. sync.
Vert. sync.
DDC Clock
DVI-I TERMINAL (DIGITAL/ANALOG)
Terminal : DVI-I
Pin Configuration
C1 C2
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
C3 C4
C5
52
C1
C2
C3
C4
C5
Analog Red Input
Analog Green Input
Analog Blue Input
Analog Horiz. sync
Analog Ground (R/G/B)
1
2
3
4
5
6
7
8
T.M.D.S. Data2–
T.M.D.S. Data2+
T.M.D.S. Data2 Shield
No Connect
No Connect
DDC Clock
DDC Data
Analog Vert. sync
9
10
11
12
13
14
15
16
T.M.D.S. Data1–
T.M.D.S. Data1+
T.M.D.S. Data1 Shield
No Connect
No Connect
+5V Power
Ground (for +5V)
Hot Plug Detect
17
18
19
20
21
22
23
24
T.M.D.S. Data0–
T.M.D.S. Data0+
T.M.D.S. Data0 Shield
No Connect
No Connect
T.M.D.S. Clock Shield
T.M.D.S. Clock+
T.M.D.S. Clock–
Appendix
SERVICE PORT CONNECTOR
Terminal : Mini DIN 8-PIN
Pin Configuration
8
5
7 6
4 3
2 1
1
2
3
4
5
6
7
8
PS/2
----CLK
DATA
GND
--------GND
-----
1
2
3
4
Vcc
- Data
+ Data
Ground
Serial
RXD
--------GND
RTS / CTS
TXD
GND
GND
ADB
----ADB
----GND
------------GND
USB CONNECTOR (Series B)
Pin Configuration
2
1
3
4
Optional Parts
The parts listed below are optionally supplied. When ordering those parts, give the name and Type No. to the sales dealer.
● MAC Adapter
Type No. : POA-MACAP
● DVI Cable
Type No. : KA-DV20
● COMPONENT-VGA Cable
Type No. : POA-CA-COMPVGA
● SCART-VGA Cable
Type No. : POA-CA-SCART
(This cable is used for RGB Scart 21-Pin
Video output of video equipment.)
● Multi Card Imager Box
Type No. : POA-BOX20
● Compact Flash Card
Type No. : POA-CFC20
● Wired LAN Card
Type No. : POA-WDC20
● Wireless LAN Card
Type No. : POA-WLC20
When using the Wired or Wireless LAN Card, set the following model name in the PJ Controller operation.
Model Name : 08-1-1
53
Appendix
Attaching the Lens Cover
When moving this projector or when it is not used for an extended
period, replace the lens cover.
1
Secure the string for the lens cover through a hole of the
lens cover.
2
Turn the projector upside down and secure the string for
lens cover to a hole on the bottom of the projector with a
screw.
Lens Cover
String for the lens
cover
Secure it to the hole
with a screw.
Hole
54
Printed in Japan
Part No. 610 315 5029 (1AA6P1P4568-- MJ5A)
SANYO Electric Co., Ltd.
Download PDF
Similar pages