.
D-ILA
PROJECTOR
Set up
DLA-RS640
DLA-RS540
DLA-RS440
Getting Started
INSTRUCTIONS
Operate
MODE 1
MODE 2
MODE 3
SETTING MEMORY
ANAMO.
Adjust/Set
HDR
PICTURE
MODE
COLOR
PROFILE
GAMMA
SETTINGS
C.M.D.
.
Maintenance
Mobile User Guide
http://manual3.jvckenwood.com/projector/mobile/global/
The Mobile User Guide can be viewed on mobile internet devices including
smartphones and tablets.
Pour utilisation par le client :
Entrerci-dessous le N°de série qui
est situé sous le boîtier. Garder
cetteinformation comme référence
pour le futur.
Instrucción para el cliente :
Introduzca a continuación el nº de
serie que aparece en la parte
inferior lateral de la caja. Conserve
esta información como referencia
para uso ulterior.
Model No. DLA-RS640 /DLA-RS540 /
DLA-RS440
N° de modèle DLA-RS640 /DLA-RS540 /
DLA-RS440
Modelo Nº DLA-RS640 /DLA-RS540 /
DLA-RS440
Serial No.
N° de série
Nº de serie
Others
For Customer use :
Enter below the serial No. which is
located on the side of the cabinet.
Retain this information for future
reference.
Troubleshooting
.
.
Not suitable for household room illumination.
B5A-2360-0C
Safety Precautions
Getting Started
IMPORTANT INFORMATION
This product has a High Intensity
Dis-charge (HID) lamp that contains
mercury. Manage in accord with
disposal laws.
Disposal of these materials may be
regulated in your community due to
environmental considerations. For
disposal or recycling information,
please contact your local authorities or
for USA, the Electronic Industries
Alliance: http://www.eiae.org. or call
1-800-252-5722(For USA)
or 1-800-964-2650(For Canada).
WARNING:
TO PREVENT FIRE OR SHOCK HAZARDS, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
WARNING:
THIS APPARATUS MUST BE EARTHED.
CAUTION:
To reduce the risk of electric shock, do not remove
cover. Refer servicing to qualified service personnel.
This projector is equipped with a 3-blade grounding
type plug to satisfy FCC rule. If you are unable to
insert the plug into the outlet, contact your electrician.
NOISE EMISSION DECLARATION
The sound pressure level at the operator position is
equal or less than 50dB(A) according to ISO7779.
For the customers in Taiwan only
FCC INFORMATION (U.S.A. only)
CAUTION:
Changes or modification not approved by JVC could
void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply
with the limits for Class B digital devices, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encourage to try to
correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help.
Declaration of Conformity
Model Number: DLA-RS640K, DLA-RS540K,
DLA-RS440K
Trade Name: JVC
Responsible party: JVCKENWOOD USA Corporation
Address: 1700 Valley Road Wayne, N. J. 07470
Telephone Number: 973-317-5000
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
⹣晼㯡婌♟㒷
About the installation place
Do not install the projector in a place that cannot
support its weight securely.
If the installation place is not sturdy enough, the
projector could fall or overturn, possibly causing
personal injury.
.
2
IMPORTANT SAFEGUARDS
300 mm
and above
300 mm
and above
Getting Started
Electrical energy can perform many useful functions.
This unit has been engineered and manufactured to
assure your personal safety. But IMPROPER USE
CAN RESULT IN POTENTIAL ELECTRICAL
SHOCK OR FIRE HAZARD. In order not to defeat
the safeguards incorporated into this product,
observe the following basic rules for its installation,
use and service. Please read these Important
Safeguards carefully before use.
- All the safety and operating instructions should be read
before the product is operated.
- The safety and operating instructions should be retained for
future reference.
- All warnings on the product and in the operating
instructions should be adhered to.
- All operating instructions should be followed.
- Place the projector near a wall outlet where the plug can be
easily unplugged.
- Unplug this product from the wall outlet before cleaning.
- Do not use liquid cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
- Do not use attachments not recommended by the product
manufacturer as they may be hazardous.
- Do not use this product near water. Do not use immediately
after moving from a low temperature to high temperature,
as this causes condensation, which may result in fire,
electric shock, or other hazards.
- Do not place this product on an unstable cart, stand, or
table. The product may fall, causing serious injury to a child
or adult, and serious damage to the product. The product
should be mounted according to the manufacturer’s
instructions, and should use a mount recommended by the
manufacturer.
PORTABLE CART WARNING
(symbol provided by RETAC)
- When the product is used on a cart,
care should be taken to avoid quick
stops, excessive force, and uneven
surfaces which may cause the product
and cart to overturn, damaging
equipment or causing possible injury to
the operator.
S3126A
- Slots and openings in the cabinet are
provided for ventilation. These ensure reliable operation of
the product and protect it from overheating. These
openings must not be blocked or covered. (The openings
should never be blocked by placing the product on bed,
sofa, rug, or similar surface. It should not be placed in a
built-in installation such as a bookcase or rack unless
proper ventilation is provided and the manufacturer’s
instructions have been adhered to.)
- To allow better heat dissipation, keep a clearance between
this unit and its surrounding as shown below. When this unit
is enclosed in a space of dimensions as shown below, use
an air-conditioner so that the internal and external
temperatures are the same. Overheating can cause
damage.
150 mm and above
- Power source indicated on the label. If you are not sure of
the type of power supply to your home, consult your
product dealer or local power company.
- This product is equipped with a three-wire plug. This plug
will fit only into a grounded power outlet. If you are unable
to insert the plug into the outlet, contact your electrician to
install the proper outlet. Do not defeat the safety purpose of
the grounded plug.
- Power-supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon or
against them. Pay particular attention to cords at doors,
plugs, receptacles, and the point where they exit from the
product.
- For added protection of this product during a lightning
storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and
disconnect the cable system. This will prevent damage to
the product due to lightning and power line surges.
- Do not overload wall outlets, extension cords, or
convenience receptacles on other equipment as this can
result in a risk of fire or electric shock.
- Never push objects of any kind into this product through
openings as they may touch dangerous voltage points or
short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the product.
- Do not attempt to service this product yourself as opening
or removing covers may expose you to dangerous voltages
and other hazards. Refer all service to qualified service
personnel.
- Unplug this product from the wall outlet and refer service to
qualified service personnel under the following conditions:
a) When the power supply cord or plug is damaged.
b) If liquid has been spilled, or objects have fallen on the
product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally by following the
operating instructions. Adjust only those controls that
are covered by the Operation Manual, as an improper
adjustment of controls may result in damage and will
often require extensive work by a qualified technician to
restore the product to normal operation.
e) If the product has been dropped or damaged in any
way.
f) When the product exhibits a distinct change in
performance, this indicates a need for service.
- When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer or with same characteristics as the original
part. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
- Upon completion of any service or repairs to this product,
ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
- The product should be placed more than one foot away
from heat sources such as radiators, heat registers, stoves,
and other products (including amplifiers) that produce heat.
- When connecting other products such as VCR’s, and DVD
players, you should turn off the power of this product for
protection against electric shock.
150 mm
and above
Front
200 mm
and above
.
3
Getting Started
- Do not place combustibles behind the cooling fan. For
example, cloth, paper, matches, aerosol cans or gas
lighters that present special hazards when over heated.
- Do not look into the projection lens while the illumination
lamp is turned on. Exposure of your eyes to the strong light
can result in impaired eyesight.
- Do not look into the inside of this unit through vents
(ventilation holes), etc. Do not look at the illumination lamp
directly by opening the cabinet while the illumination lamp is
turned on. The illumination lamp also contains ultraviolet
rays and the light is so powerful that your eyesight can be
impaired.
- Do not drop, hit, or damage the light-source lamp (lamp
unit) in any way. It may cause the light-source lamp to
break and lead to injuries. Do not use a damaged light
source lamp. If the light-source lamp is broken, ask your
dealer to repair it. Fragments from a broken light-source
lamp may cause injuries.
- The light-source lamp used in this projector is a high
pressure mercury lamp. Be careful when disposing of the
light-source lamp. If anything is unclear, please consult
your dealer.
- Do not ceiling-mount the projector to a place which tends to
vibrate; otherwise, the attaching fixture of the projector
could be broken by the vibration, possibly causing it to fall
or overturn, which could lead to personal injury.
- Use only the accessory cord designed for this product to
prevent shock.
- For health reasons, please take a break of about 5-15
minutes every 30-60 minutes and let your eyes rest. Please
refrain from watching any 3D-images when you feel tired,
unwell or if you feel any other discomfort. Moreover, in case
you see a double image, please adjust the equipment and
software for proper display. Please stop using the unit if the
double image is still visible after adjustment.
- Once every three years, please perform an internal test.
This unit is provided with replacement parts needed to
maintain its function (such as cooling fans). Estimated
replacement time of parts can vary greatly depending on
frequency of use and the respective environment. For
replacement, please consult your dealer, or the nearest
authorized JVC service center.
- When fixing the unit to the ceiling, Please note that we do
not take any responsibility, even during the warranty period,
if the product is damaged due to use of metal fixtures used
for fixation to the ceiling other than our own or if the
installation environment of said metal fixtures is not
appropriate. If the unit is suspended from the ceiling during
use, please be careful in regard to the ambient temperature
of the unit. If you use a central heating, the temperature
close to the ceiling will be higher than normally expected.
- Video images can burn into the electronic component parts.
Please do not display screens with still images of high
brightness or high contrast, such as found in video games
and computer programs. Over a long period of time it might
stick to the picture element. There is no problem with the
playback of moving images, e.g. normal video footage.
.
4
- Not using the unit for a long time can lead to malfunction.
Please power it on and let it run occasionally. Please avoid
using the unit in a room where cigarettes are smoked. It is
impossible to clean optical component parts if they are
contaminated by nicotine or tar. This might lead to
performance degradation.
- Please watch from a distance three times the height of the
projected image size. Persons with photosensitivity, any
kind of heart disease, or weak health should not use 3D
glasses.
- Watching 3D-images might be cause of illness. If you feel
any change in your physical condition, please stop
watching immediately and consult a physician if necessary.
- When watching 3D images, it is recommended to take
regular breaks. As the length and frequency of the required
breaks differ for every person, please judge according to
your own condition.
- If your child watches while wearing 3D glasses, it should be
accompanied by its parents or an adult guardian. The adult
guardian should be careful to avoid situations where the
child’s eyes might become tired, as responses to tiredness
and discomfort, etc., are hard to detect, and it is possible
for the physical condition to deteriorate very quickly. As the
visual sense is not yet fully developed in children under the
age of 6, please consult a physician in regard to any
problem concerning 3D-images if necessary.
- Note that when using the 3D feature, the video output may
appear different from the original video image due to image
conversion on the device.
* DO NOT allow any unqualified person to
install the unit.
Be sure to ask your dealer to install the unit
(e.g.attaching it to the ceiling) since special
technical knowledge and skills are required for
installation. If installation is performed by an
unqualified person, it may cause personal injury or
electrical shock.
- Do not use optical instruments (such as magnifying glass or
reflector) viewing the laser output. It may pose an eye
hazard.
- When turning on the projector, ensure that no one is looking
into the projection lens.
- Do not look into the lens and openings when the light is on.
Doing so would have serious effects on the human body.
- Do not detach or attach the projection lens with the power
connected.
- Attempting to disassemble, repair or modify the projector
yourself may lead to serious safety issues.
- Using a faulty product not only results in electrical shock or
fire hazard, it can cause visual impairment.
- When abnormality occur, stop using the projector
immediately and send it to your authorized dealer for repair.
POWER CONNECTION
Power cord
The power supply voltage rating of this product is
AC100V – AC240V. Use only the power cord
designated by our dealer to ensure Safety and EMC.
Ensure that the power cable used for the projector is
the correct type for the AC outlet in your country.
Consult your product dealer.
Power cord
For United Kingdom
For European continent
countries
WARNING:
Do not cut off the main plug from this
equipment.
If the plug fitted is not suitable for the power points
in your home or the cable is too short to reach a
power point, then obtain an appropriate safety
approved extension lead or adapter or consult your
dealer. If nonetheless the mains plug is cut off,
dispose of the plug immediately, to avoid a possible
shock hazard by inadvertent connection to the main
supply.
WARNING:
THIS APPARATUS MUST BE EARTHED.
Getting Started
For USA and Canada only
Use only the following power cord.
IMPORTANT (Europe only):
The wires in the mains lead on this product are
colored in accordance with the following code:
Green-and-yellow : Earth
: Neutral
Blue
Brown
: Live
As these colors may not correspond with the
colored making identifying the terminals in your
plug, proceed as follows:
The wire which is colored green-and-yellow must be
connected to the terminal which is marked M with
the letter E or the safety earth or colored green or
green-and-yellow. The wire which is colored blue
must be connected to the terminal which is marked
with the letter N or colored black.
The wire which is colored brown must be connected
to the terminal which is marked with the letter L or
colored red.
POWER CONNECTION
(United Kingdom only)
IMPORTANT (Europe only):
When replacing the fuse, be sure to use only a
correctly rated approved type, re-fit the fuse cover.
IF IN DOUBT —— CONSULT A COMPETENT
ELECTRICIAN.
Open the fuse compartment with the blade
screwdriver, and replace the fuse.
(* An example is shown in the illustration below.)
Fuse
Dear Customer,
This apparatus is in conformance with the valid
European directives and standards regarding
electromagnetic compatibility and electrical safety.
European representative of
JVC KENWOOD Corporation is:
JVCKENWOOD Deutschland GmbH
Konrad-Adenauer-Allee 1-11,
61118 Bad Vilbel,
GERMANY
.
5
ENGLISH
Getting Started
Information for Users on Disposal of Old Equipment and Batteries
[European Union only]
These symbols indicate that equipment with these symbols should not be disposed
of as general household waste. If you want to dispose of the product or battery,
please consider the collection systems or facilities for appropriate recycling.
Battery
Products
Notice: The sign Pb below the symbol for batteries indicates that this battery contains lead.
FRANÇAIS
Informations relatives à l’élimination des appareils et des piles usagés, à l’intention des utilisateurs
Pile
Produits
[Union européenne seulement]
Si ces symboles figurent sur les produits, cela signifie qu’ils ne doivent pas être jetés
comme déchets ménagers. Si vous voulez jeter ce produit ou cette pile, veuillez
considérer le système de collecte des déchets ou les centres de recyclage appropriés.
Notification: La symbole Pb en dessous du symbole des piles indique que cette
pile contient du plomb.
ESPAÑOL / CASTELLANO
Información para los usuarios sobre la eliminación de baterías/pilas usadas
Baterías/pilas
Productos
[Sólo Unión Europea]
Estos símbolos indican que el equipo con estos símbolos no debe desecharse
con la basura doméstica. Si desea desechar el producto o batería/pila, acuda
a los sistemas o centros de recogida para que los reciclen debidamente.
Atención: La indicación Pb debajo del símbolo de batería/pila indica que ésta
contiene plomo.
DEUTSCH
Benutzerinformationen zur Entsorgung alter Geräte und Batterien
Batterie
Produkte
[Nur Europäische Union]
Diese Symbole zeigen an, dass derartig gekennzeichnete Geräte nicht als normaler
Haushaltsabfall entsorgt werden dürfen. Wenden Sie sich zur Entsorgung des
Produkts oder der Batterie an die hierfür vorgesehenen Sammelstellen oder
Einrichtungen, damit eine fachgerechte Wiederverwertung möglich ist.
Hinweis: Das Zeichen Pb unterhalb des Batteriesymbols gibt an, dass diese
Batterie Blei enthält.
ITALIANO
Informazioni per gli utenti sullo smaltimento delle apparecchiature e batterie obsolete
Batteria
Prodotti
[Solo per l’Unione Europea]
Questi simboli indicano che le apparecchiature a cui sono relativi non devono
essere smaltite tra i rifiuti domestici generici. Se si desidera smaltire questo
prodotto o questa batteria, prendere in considerazione i sistem i o le strutture di
raccolta appropriati per il riciclaggio corretto.
Nota: Il simbolo Pb sotto il simbolo delle batter ie indica che questa batteria contiene piombo.
NEDERLANDS
Informatie voor gebruikers over het verwijderen van oude apparatuur en batterijen
Batterij
Producten
.
6
[Alleen Europese Unie]
Deze symbolen geven aan dat apparatuur met dit symbool niet mag worden
weggegooid als algemeen huishoudelijk afval. Als u het product of de batterij wilt
weggooien, kunt u inzamelsystemen of faciliteiten voor een geschikte recycling
gebruiken.
Opmerking: Het teken Pb onder het batterijsymbool geeft aan dat deze batterij lood bevat.
Getting Started
Location information of the labels
As with any bright light source, do not stare into the
beam, RG2 IEC 62471-5:2015
.
7
Contents
Getting Started
Getting Started
Safety Precautions .................................................. 2
Accessories/Optional Accessories .......................... 9
Check the Accessories ........................................ 9
Optional Accessories ........................................... 9
Controls and Features ........................................... 10
Main Unit - Front ................................................ 10
Main Unit - Bottom ............................................. 10
Main Unit - Rear ................................................. 11
Main Unit - Input Terminals ................................ 12
Remote Control ................................................. 13
Loading Batteries into the Remote Control ........ 14
Effective Range of Remote Control Unit ............ 14
Set up
Installing the Projector ........................................... 15
Precautions during Installation ........................... 15
Precautions during Mounting ............................. 16
Adjusting the Position ........................................ 17
Connecting the Projector ....................................... 18
Connecting to the HDMI Input Terminal (Digital
Input) ................................................................. 18
Connecting to the LAN Terminal ........................ 19
Connecting to the RS-232C Terminal ................ 19
Connecting to the TRIGGER Terminal ............... 20
Connecting the Power Cord (Supplied Accessory) ...... 20
Operate
Viewing Videos ...................................................... 21
Adjusting the Projector Screen .............................. 23
Adjusting the Lens According to the Projection
Position .............................................................. 23
Saving and Retrieving Adjustment Settings ....... 24
Setting Screen Correction .................................. 26
Adjusting the Screen Size (Aspect) ................... 27
Viewing 3D Movies ................................................ 28
Installing the 3D Synchro Emitter ....................... 28
Viewing 3D Movies ............................................ 29
Adjusting 3D Movies .......................................... 29
Adjust/Set
Selecting an Image Quality According to the Video
Type ...................................................................... 30
Setting the Picture Mode ................................... 30
Setting the Color Profile ..................................... 31
Adjusting to the Preferred Color (Color
Management) .................................................... 33
Adjusting Movies for Increased Expressiveness
(Multiple Pixel Control) .......................................... 35
8
Fine-tuning the Image Quality ............................... 36
Adjusting the Output Value of the Projected Image
(Gamma) ........................................................... 36
Fine-tuning to the Preferred Gamma Setting ..... 37
Reducing the After-image of Fast-moving Images
(Blur Reduction) ................................................. 41
Viewing High Contrast Images (Lens Aperture) . 43
Adjustments and Settings in the Menu .................. 44
List of Menu Items ............................................. 44
Picture Adjust .................................................... 46
Input Signal ........................................................ 49
Installation ......................................................... 51
Display Setup .................................................... 57
Function ............................................................. 57
Information ......................................................... 59
Maintenance
Replacing the Lamp .............................................. 60
Lamp Replacement Procedure .......................... 60
Resetting the Lamp Time ................................... 62
Maintaining the Cabinet and Remote Control ........ 62
Cleaning and Replacing the Filter ......................... 63
Troubleshooting
Troubleshooting .................................................... 64
When the Following Messages Appear... .............. 68
Others
External Control .................................................... 69
RS-232C Specifications ..................................... 69
TCP/IP Connection ............................................ 69
Command Format .............................................. 70
Remote Control Code ........................................ 71
Communications Example ................................. 72
Specifications ........................................................ 73
Index ..................................................................... 80
Symbols used in this manual
P indicates a function that is supported by DLA-RS640.
Q indicates a function that is supported by DLA-RS540.
R indicates a function that is supported by DLA-RS440.
Items not marked with any of the above symbols are
supported by all models.
Accessories/Optional Accessories
Getting Started
Check the Accessories
Lens cover R ................................................................... 1 piece
* It is attached to the main unit at the time of shipment.
.
Remote control ....................................................................... 1 piece
.
AAA-size batteries (for operational check) ............................ 2 pieces
.
Power cord (for USA) (about. 2 m) ......................................... 1 piece
.
Power cord (for UK) (about. 2 m) ............................................ 1 piece
.
Power cord (for EU) (about. 2 m) ............................................ 1 piece
.
0
Quick User Guide, safety precautions, warranty card, and other printed material are also included.
0
Be sure to read the “Safety Precautions” before using this projector.
Optional Accessories
0
Replacement lamp: Product no. PK-L2615U
0
3D Glasses: model PK-AG3
0
3D Synchro Emitter: model PK-EM2
Compatibility Chart for 3D Synchro Emitter and 3D Glasses
3D Glasses
PK-AG1 *
PK-AG2 *
PK-AG3
(Communication
(Communication
(Communication
Method: IR (Infrared)) Method: IR (Infrared)) Method: RF (Radio
frequency))
3D Synchro Emitter
PK-EM1 *
(Communication
Method: IR (Infrared))
X
X
—
PK-EM2
(Communication
Method: RF (Radio
frequency))
—
—
X
* Discontinued product
Please check with your authorized dealer for details.
9
Controls and Features
Getting Started
Main Unit - Front
D
E
E
C
.
AB
A Lens
D Indicator
This is a projection lens. Do not look through the lens
while an image is projected.
B Lens cover P Q
The lens cover opens/closes when the power supply
is turned on/off. (P. 51)
Refer to “Indicator Display on the Main Unit”P. 77.
E Exhaust vent
Warm air is discharged to cool down the internal
temperature.
Do not block the vents.
For R, attach the lens cover when the unit is not
in use.
0
C Remote Sensor (front)
Please aim the remote control at this area when using
it.
* There is also a remote sensor at the rear.
Main Unit - Bottom
F
F Inlets (at 3 points on the rear/bottom)
G
The inlets take in air to cool down the internal temperature.
Do not block or prevent the outflow of hot air. Doing so may cause
the unit to malfunction.
* There are two inlets on the right and left sides at the rear of the unit.
G Manual button for lens cover P Q
H
The lens cover can be opened when pressed down.
It is used for maintenance purposes. You can also make use of it
when you need to open the lens cover urgently.
H Feet
The height and angle of the projector can be adjusted by turning the
foot. (0 to 5 mm) (P. 17)
When the foot is removed, it can be used as the mounting holes for
the ceiling mount bracket.
10
Getting Started
Main Unit - Rear
F
F
J
I
.
M
L K
I Input terminals
In addition to the video input terminal, there are also
other connection terminals for devices such as
controllers and optional equipment.
Please see “Main Unit - Input Terminals”P. 12 for
more details about the terminals.
J Lamp cover
L Remote sensor (rear)
Please aim the remote control at this area when using
it.
* There is also a remote sensor at the front.
M Power input terminal
Connect the supplied power cord to this terminal.
When replacing the light source lamp, remove this
cover.
K Operation panel
For more details, please refer to the “Operation
panel” in the diagram below.
Operation panel
A [STANDBY/ON]: Turns “on”/“off” the
power
[INPUT]: Switches the input
[OK]: Confirms a selection
[JKH I] keys: Selects an item
[MENU]: Displays the menu
[BACK]: Returns to the previous menu
.
11
Getting Started
Main Unit - Input Terminals
Enlarged View of Rear Face
A
B
C
D
F
E
.
A [HDMI 1] input terminal
B [HDMI 2] input terminal
For connecting to devices that support HDMI output.
(P. 18)
It is fitted to the M3 lock hole. The depth of the screw
hole is 3 mm.
C [LAN] terminal (RJ-45)
The projector can be controlled by connecting it to a
PC through the computer network for control
commands to be sent to the projector.
D [RS-232C] terminal (D-sub 9-pin
male)
The projector can be controlled by connecting a PC to
this terminal.
E [3D SYNCHRO] terminal
By connecting a 3D Synchro Emitter (sold separately)
to this terminal, you can view 3D movies.
12
F [TRIGGER] terminal (E)
Output terminal for DC 12 V, 100 mA power supply. It
is used for sending output signals to control devices
such as an elevating screen that is equipped with a
trigger function.
Note that improper connection may damage the
projector. (Tip=DC +12 V, Sleeve=GND)
A B [STAND BY]
Turns off the power. (P. 22)
B C [ON]
A
Turns on the power. (P. 21)
B
C
D
E
F
G
H
C [INPUT]
Switches the input to [HDMI 1] or
[HDMI 2]. (P. 21)
INPUT
HDMI 1
HDMI 2
INFO.
MODE1
MODE2
MODE3
D [INFO.]
Displays the information menu.
(P. 59)
SETTING MEMORY
E [SETTING MEMORY]
LENS
CONTROL
LENS AP.
Retrieves the [MODE 1] (LENS
MEMORY 1), [MODE 2] (LENS
MEMORY 2) or [MODE 3] (LENS
MEMORY 3) lens memory.
ANAMO.
F [LENS CONTROL]
I
J
0
K
L
M
G [LENS AP.]
N
O
R
S
T
U
V
W
X
For adjusting focus, zoom, and
shift. (P. 23)
Pressing the button each time
switches the function in the
following sequence: “Focus” "
“Zoom” " “Shift”...
For setting the lens aperture.
(P. 43)
PICTURE MODE
NATURAL
CINEMA
HDR
PICTURE
MODE
COLOR
PROFILE
GAMMA
SETTINGS
C.M.D.
ADVANCED
MENU
MPC
GAMMA
COLOR
TEMP.
3D
FORMAT
PIC.
ADJ.
P
Q
H [ANAMO.]
0
Switches the anamorphic mode.
Pressing the button each time
switches the anamorphic mode in
sequence.
I [HIDE]
Hides the image temporarily.
(P. 21)
J [LIGHT]
Illuminates the buttons on the
remote control.
K [JKH I] keys
For selecting an item.
L [OK]
Confirms a selected item.
O [PICTURE MODE]
0
0
P [COLOR PROFILE]
Displays the color profile selection
menu. (P. 31)
Q [GAMMA SETTINGS]
Displays the gamma setting
menu.
R [ADVANCED MENU]
Pressing the button each time
switches the menu in the following
sequence: “Picture Mode” "
“Color Profile” " “Color Temp.” "
“Gamma” " “Blur Reduction”...
S [MPC]
Displays the MPC setting menu.
(P. 35)
T [C.M.D.]
0
N [BACK]
Returns to the previous menu.
For setting frame interpolation.
(P. 42)
Pressing the button each time
switches the frame interpolation
in sequence.
U [GAMMA]
0
Switches the gamut. (P. 36)
Pressing the button each time
switches the configurable gamma
in sequence.
V [COLOR TEMP.]
0
Switches the color temperature.
(P. 47)
Pressing the button each time
switches the configurable color
temperature in sequence.
W [3D FORMAT]
M [MENU]
Displays the menu, or hides the
menu if it is displayed.
Switches the picture mode.
(P. 30)
Press [NATURAL], [CINEMA] or
[HDR] to switch to the respective
picture mode.
Pressing [PICTURE MODE]
displays the Picture mode
selection menu.
0
For setting the 3D format.
(P. 29)
Pressing the button each time
switches the 3D format in
sequence.
X [PIC. ADJ.]
0
Displays the picture quality
adjustment gauge. (P. 48)
Pressing the button each time
displays the picture quality
adjustment gauge in sequence.
13
Getting Started
Remote Control
Getting Started
Loading Batteries into the Remote Control
Loading the batteries
0
.
0
0
If the remote control has to be brought closer to the
unit to operate, it means that the batteries are wearing
out. Replace the batteries with new ones (AAA).
Insert the batteries according to the t s marks.
Be sure to insert the s end first.
When removing the battery, do so from the t end.
If an error occurs while using the remote control,
remove the batteries and wait for five minutes. Load
the batteries again and operate the remote control.
CAUTION
Removing the batteries
0
.
0
Do not put the remote control in a place with an
exposure to direct sun light or high temperature.
It may deformed due to heat, or the internal
components may be adversely affected resulting in
fire hazard.
Remove the batteries from the remote control when
storing the remote control.
Storing the remote control for a prolonged period
without removing the batteries can cause battery
leakage.
Effective Range of Remote Control Unit
When aiming the remote control toward the sensor on this
unit (front or rear), ensure that the distance to the sensor
is within 7 m.
If the remote control fails to work properly, move closer
to this unit.
This unit
Control through reflection off a screen, etc.
Ensure that the total of distance A (between this unit and
the screen) and distance B (between the remote control
and the screen) is within 7 m.
* As the efficiency of signals reflected from the remote
control unit varies with the type of screen used, the
operable distance may decrease.
30°
Screen
30°
20°
30°
20°
30°
20°
Remote Control
20°
This unit
A
.
B
Remote Control
.
CAUTION
0
0
14
Do not put the remote control in a place with an exposure to direct sun light or high temperature.
It may deformed due to heat, or the internal components may be adversely affected resulting in fire hazard.
Remove the batteries from the remote control when storing the remote control.
Storing the remote control for a prolonged period without removing the batteries can cause battery leakage.
Installing the Projector
Precautions during Installation
Do not install at the following
.
Projection with the unit inclined at an angle
Horizontal inclination: within ± 5 °
0
5°
5°
.
Vertical inclination: within ± 15 °
.
15°
15°
As the unit discharges a large amount of heat, install it
with adequate clearance from the surroundings as shown
below.
15°
Maintain clearance from the wall, etc.
.
150 mm and above
300 mm
and above
150 mm
and above
Front
0
300 mm
and above
Malfunction may occur if the angle is not set within the
abovementioned range.
Installing the screen
Install the unit and the screen such that they are
perpendicular to each other.
Screen
200 mm
and above
Leave the front area of the unit unblocked.
If there is any obstructing object in front of the exhaust
vent, hot air will flow back to the unit and cause it to heat
up. Hot air flowing out of the unit may cast shadows on
the screen (heat haze phenomenon).
Front
.
0
0
Please choose a screen material with non-uniform
patterns. Uniform patterns such as checks may cause
interference patterns to occur.
In this case, you can change the size of the screen to
make the interference patterns less noticeable.
Using the projector at a high altitude
When using this unit at a location that is higher than 900
m above sea level (low air pressure), set the “High
Altitude Mode” to “On”. (P. 53)
15
Set up
This unit is a precision device. Please refrain from
installing or using it at the following locations. Otherwise,
it may cause fire or malfunction.
0 Dusty, wet and humid places
0 Places subject to oily smoke or cigarette smoke
0 On top of a carpet or bedding, or other soft surfaces
0 Places exposed to direct sunlight
0 Places with a high or low temperature
0 Do not install this unit in a room that is oily or subject
to cigarette smoke. Even a small quantity of smoke or
oiliness can have a long-term impact on this unit.
* This unit produces a great amount of heat, and is
designed to take in cool air to cool its optical
components. Using the unit at the above locations
may cause dirt to attach to the light path, thereby
resulting in dark images or dull colors.
* Dirt that sticks to the optical components cannot be
removed.
Using the projector
This unit uses a projection lamp, which will heat up when
in use.
Please refrain from projecting in the following
circumstances. Otherwise, it may cause fire or
malfunction.
0 Projection with the unit stood vertically
15°
Please read the following carefully before installing this
unit.
Precautions during Mounting
Securing (mounting) the projector
Securing the projector (ceiling mount)
Set up
.
.
0
When this unit is to be mounted to a fixed position for
use, install it horizontally.
0
Make sure to secure the main unit to prevent
accidents such as during an earthquake.
0
Be sure to ask your dealer to install the unit for you.
Installing the unit on your own may cause the unit to
fall resulting in injury.
0
Take the necessary actions to prevent the main unit
from falling off such as during an earthquake.
0
Regardless of the warranty period, JVC is not liable
for any product damage caused by mounting the unit
with non-JVC ceiling fittings or to an environment that
is not suited for ceiling mount.
0
When using the unit with it suspended from a ceiling,
pay attention to the surrounding temperature. When
a heater is in use, the temperature around the ceiling
may be higher than expected.
0
To attach the unit to the ceiling mount bracket, set the
torque between the range of 1.5N m to 2.0N m.
Tightening with torque exceeding the above range
may cause damage to the unit, which may result the
unit to fall.
0
Install the outlet at an accessible height to unplug from
the wall. Or install the circuit breaker at an accessible
height to shut down the projector. If you need
information, please consult your authorized dealer or
specialist.
Securing with screws
4 Locations
Air Inlets
.
Remove the four feet at the bottom, and fasten using the
screws (M5 screws, 13 to 23 mm).
* Using screws other than those designated may cause
the unit to break down.
* Leave a clearance of at least 10 mm from the bottom
surface of the unit to allow it to take in cool air.
16
Adjusting the Position
Adjusting the elevation angle of the projector
The height and inclination of the unit (0 to 5 mm) can be
adjusted by turning the feet.
Lift the unit and adjust the four feet.
Adjusting the position of the image
By using the lens shift feature of this unit, you can shift
the image upward/downward or to the left/right. Set it to
your preferred position.
Æ “Adjusting the Lens According to the Projection
Position” (P. 23)
■ Horizontal Position
Vertical Position: 0% (Center)
Set up
Up to about 34% of the
projected image
Feet
■ Vertical Position
Horizontal Position: 0 % (Center)
Extend
Up to about 80% of the
projected image
Contract
.
■ Lens shift Range
90
Vertical lens shift (%)
80
70
Lens movement range
60
50
40
30
20
10
0
10
20
30 40
Horizontal lens shift (%)
.
0
The maximum vertical shift varies with the amount of
horizontal shift. Similarly, the maximum horizontal
shift also changes with the amount of vertical shift.
0
The values on the graph are intended as a guide. Use
them for reference during installation.
17
Connecting the Projector
0
Do not turn on the power until connection is complete.
0
The connection procedures differ according to the device used. For details, please refer to the instruction manual
of the device to be connected.
0
This projector is used for projecting images. To output the audio of connected devices, please connect a separate
audio output device, such as an amplifier or speaker.
0
The images may not be displayed depending on the devices and cables to be connected.
A high speed HDMI cable (sold separately) that is HDMI-certified is recommended.
When using a standard cable, you are recommended to set the resolution of the equipment transmitting the video
to 1080i or lower.
Set up
0
Also, please refer to “HDMI2 EDID”P. 50.
0
Some cables cannot be connected to this unit due to the size of their connector cover.
Connecting to the HDMI Input Terminal (Digital Input)
Connecting via HDMI cable
This Unit
Laptop, etc.
BD/DVD Recorder, etc.
To [HDMI 1] or [HDMI 2] input
terminal
HDMI Output Terminal
HDMI Cable (Sold Separately)
.
If noise occurs, move the laptop away from this unit.
0
Connecting through an AV amplifier
This Unit
BD/DVD Recorder, etc.
Speakers
HDMI Cable
(Sold Separately)
To [HDMI 1] or [HDMI 2] input
terminal
HDMI Cable (Sold Separately)
AV Amplifier
Speaker Cable
(Sold Separately)
.
0
18
If the source device is connected to the projector through an intermediate device such as an AV amplifier or divider,
the video image may not appear depending on the specifications of the intermediate device.
In this case, connect the source device directly to the projector, and check whether the video image is displayed.
Connecting via HDMI-DVI conversion cable
Desktop PC, etc.
This Unit
To [HDMI 1] or [HDMI 2] input
terminal
Set up
DVI Output Terminal
HDMI-DVI Conversion Cable (Sold Separately)
.
0
If noise occurs, move the desktop PC away from this unit.
0
If the video is not displayed, try to reduce the length of the cable or lower the resolution of the video transmitting
equipment.
Connecting to the LAN Terminal
Hub
This Unit
To [LAN] Terminal
Network
Connection Cable
(Sold Separately)
Server
Desktop PC, etc.
.
0
The network is used to control this unit. It is not used for sending or receiving video signals.
0
Please contact your network administrator for information concerning the network connection.
0
Set “ECO Mode” to “Off” if LAN communication is performed in the Standby mode. (P. 58)
0
For more information on control, please refer to “External Control”P. 69.
Connecting to the RS-232C Terminal
This Unit
Laptop, etc.
To [RS-232C] Terminal
RS-232C Terminal
RS-232C Connection Cable (Sold Separately)
.
0
Set “ECO Mode” to “Off” if RS-232C communication is performed in the Standby mode. (P. 58)
0
For more information on control, please refer to “External Control”P. 69.
19
Connecting to the TRIGGER Terminal
Screen
This Unit
Set up
To [TRIGGER] Terminal
Trigger Input Terminal (Ø3.5)
Trigger Cable (Sold Separately)
.
Do not use it to supply power to other devices.
0
0
Connecting to the audio terminal of another device may cause the device to malfunction or break down.
0
Using beyond the rated value will cause the unit to malfunction.
0
The trigger terminal outputs a voltage of 12 V. Exercise adequate caution to prevent short circuit.
0
The factory setting is “Off”. To change the setting, configure the “Trigger” item in the menu (P. 57).
Connecting the Power Cord (Supplied Accessory)
A Connect the power cord supplied to the power input terminal on
the main unit
B Insert the supplied power plug into the wall outlet.
A
Power Cord
(Supplied)
B
Precautions to prevent fire and electric shock
0
The power consumption of this unit is large. Please connect it directly to the wall outlet.
0
When you are not using the projector, please unplug the power cord from the outlet.
0
Connect it using only the power cord supplied.
0
Do not use a voltage other than the indicated power voltage.
0
Do not damage, break or modify the power cord. Do not place a heavy object on the power cord, or heat or pull it.
Doing so may damage the power cord.
0
Do not unplug the power cord with wet hands.
20
Viewing Videos
STANDBY/ON
LAMP
MEMO
WARNING
0
When you are using R, be sure to remove the lens cover.
0
Connect the power cord, and ensure that the “STANDBY/ON” indicator
lights up in red.
1
Turn on the power
Remote control: press the C [ON] button
R
Projector unit: press the A [STANDBY/ON] button
Remote Control
3
1
0
The “STANDBY/ON” indicator light switches from red to green (light
goes off after the unit starts up).
0
(P Q) The lens cover opens.
“STANDBY/ON” lights up (red)
In standby state
MODE 1
MODE 2
MODE 3
STANDBY/ON
TANDBY
ND
SETTING MEMORY
This unit
LAMP
WARNING
“STANDBY/ON” lights up (green)
During lamp startup
STANDBY/ON
TANDBY
ND
LAMP
Operate
2
WARNING
.
1 3
2
Choose the image to project
Remote control: press the [HDMI 1] or [HDMI 2] button
2
Projector unit: press the [INPUT] button to switch the input
0
Play back the selected device to project the image.
To hide the image temporarily
Press the [HIDE] button on the projector unit or remote control
0
The “STANDBY/ON” indicator light starts to blink in green.
0
Press the [HIDE] button again to resume display of the image.
0
The power cannot be turned off when the image is temporarily hidden.
21
3
Turn off the power
Remote control: press the B [STAND BY] button
Projector unit: press the A [STANDBY/ON] button
0
While the “Are you sure you want to turn off?” message is displayed, press the button again.
0
The lamp turns off, and the “STANDBY/ON” indicator switches from a green light to a red blinking light.
0
After the light goes off, the fan will run for about 100 seconds to cool down the lamp (Cool-down mode).
Do not disconnect the power cable while cooling is in progress.
0
After about 100 seconds, the “STANDBY/ON” indicator switches from a blinking red to a solid red light.
“STANDBY/ON” blinking (red)
In the Cool-down mode
STANDBY/ON
LAMP
“STANDBY/ON” lights up (red)
In standby state
WARNING
STANDBY/ON
TANDBY
ND
LAMP
WARNING
.
0
For R, attach the lens cover manually.
0
For P Q, the lens cover closes upon power off.
Operate
CAUTION
0
The power cannot be turned off within approximately 60 seconds after it has been turned on.
0
The power cannot be turned on again while cooling is in progress (100 seconds).
0
Pull out the power plug when the unit is not to be used for a prolonged period of time.
0
If the indication of indicator differs from the description, refer to “Indicator Display on the Main Unit”P. 77 for details.
22
Adjusting the Projector Screen
Adjusting the Lens According to the Projection Position
Press the [LENS CONTROL] button, and use the [JKH I]
keys to adjust Focus, Zoom (screen size), and Shift (screen
position)
1
Focus
MODE 1
MODE 2
MODE 3
SETTING MEMORY
1
ANAMO.
.
Pressing the [LENS CONTROL] or [OK] button each time switches the mode
in the following sequence: “Focus” " “Zoom” " “Shift” " “Focus”...
0
Operation of the lens control feature is disabled when the lens lock is set to
“On”. (P. 51)
0
For more detailed information, please refer to “Lens Control”P. 51.
HDR
PICTURE
MODE
COLOR
PROFILE
GAMMA
SETTINGS
ABCD
C.M.D.
Focus Adjustment
.
2
Zoom (Screen Size)
Adjustment
Shift (Screen Position)
Adjustment
Press the [MENU] button once, or the [BACK] twice, to end
adjustment.
23
Operate
2
0
Saving and Retrieving Adjustment Settings
The Focus, Zoom, and Shift settings can be saved or retrieved, so you can switch
easily to a different aspect ratio (screen size) according to the image.
0 In a state where no adjustment settings are saved (factory default), only “Lens
Memory Save” is displayed.
0 Operation of the lens control feature is disabled when the lens lock is set to “On”.
MODE 1
MODE 2
MODE 3
SETTING MEMORY
Saving an adjustment data
1
Adjust focus, zoom, or shift (P. 23)
2
Press the [MENU] button to display the menu and select
“Installation”"“Lens Control”"“Lens Memory Save”
ANAMO.
Installation
3
>> Lens Memory Save
-----------------
Operate
2 4
-----------------
HDR
---------
PICTURE
MODE
COLOR
PROFILE
GAMMA
SETTINGS
Operate
Exit
MENU
3
Back
BACK
Select the item to save, and press the [OK] button
0
0
0
0
0
4
24
Select
.
C.M.D.
The adjustment data is saved.
Items with no adjustment data saved are displayed as [----].
If you have selected an item for which an adjustment data has already been
saved, the old data will be overwritten.
You can change the name when saving an item. (P. 25)
The maximum number of items can be saved is 10 for P Q and 5 for
R.
Press the [MENU] button to exit
Retrieving an adjustment data
1
Press the [MENU] button to display the menu and select “Installation”"“Lens
Control”"“Lens Memory Select”
0
The data can also be retrieved using the direct keys on the remote control. The [MODE1] to [MODE3] keys
correspond to MEMORY 1 to MEMORY 3.
Installation
>> Lens Memory Select
MEMORY1
MEMORY2
--------------------------------Operate
Exit
Back
BACK
Select
MENU
.
2
Select the adjustment data to retrieve, and press the [OK] button
0
0
The retrieved data is adjusted automatically.
If no adjustment data has been saved, the item will be grayed out and cannot be selected.
Operate
Renaming an adjustment data
1
Press the [MENU] button to display the menu and select “Installation”"“Lens
Control”"“Lens Memory Name Edit”
Installation
>> Lens Memory Name Edit
MEMORY1
MEMORY2
---------------------------------
.
2
Operate
Exit
Back
BACK
Select
MENU
Select the adjustment data to edit, and press the [OK] button
0
An edit screen appears.
Installation
>> Lens Memory Name Edit
Input Cursor
Name MEMORY1
Selection Cursor
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
f
g
m
a
b
c
d
i
j
k
l
n
o
p
q
r
s
t
y
v
w
x
y
1
2
3
4
5
6
7
8
9
0
,
.
^
!
"
#
$
%
&
*
+
-
/
=
?
@
:
;
|
~
(
)
<
>
[
]
{
}
\
SPACE
e
Clear
All Clear
Operate
Exit
MENU
h
Select
z
Character List
OK
Back
BACK
.
0
0
0
You can input up to 10 characters.
Characters that are usable include alphabets (upper or lower case), numeric characters, and symbols.
Pressing the [Back] button cancels the content that is currently being edited, and exits the edit mode.
3
After renaming, select “OK” and press the [OK] button
4
Press the [MENU] button to exit
25
Setting Screen Correction
1
Set Screen Adjust
By selecting the optimal correction mode
according to the characteristics of the screen in
use, corrections can be performed to reproduce
natural images with balanced colors.
Installation
Lens Control
Keystone
Front
0
Anamorphic
Off
High Altitude Mode
Off
Screen Adjust
2
Operate
Exit
MENU
Off
3
Screen No.
Select
1
Back
BACK
.
Operate
0
This item is not available when “Color Profile” is
set to “Off”.
0
For information on the screen and the
corresponding correction mode, please visit our
website.
http://www3.jvckenwood.com/english/projector/screen/
26
You can utilize the optional optical sensor and
dedicated projector calibration software to make finer
adjustments.
For details on the dedicated projector calibration
software, please visit our website.
http://www3.jvckenwood.com/english/download/
Pixel Adjust
Installation Style
MEMO
0
Adjusting the Screen Size (Aspect)
The screen size of the projected image can be adjusted
optimally according to the original screen size (aspect)
that has been input.
1
2
Press the [MENU] button to display
the menu
Select “Input Signal” " “Aspect” in the
menu, then select the setting and
press [OK]
Input Signal
Input Level
Example of input image and screen size
HDMI Signal Input
.
Output Image
Input Image
Setting
4:3
16:9
Zoom
4:3
2.35:1
(Cinema
Scope)
Auto
Color Space
Auto
Aspect
16:9
Progressive
Auto
PC Signal Input
Mask
Operate
3D Setting
.
Picture Position
HDMI2 EDID
Output Image
A
Input Image
Operate
Exit
MENU
Select
Just
Full
Back
BACK
.
Setting
Setting
Auto
1280×1024
Description
Sets the screen size to 4:3. For Displayed
HD signals, the two sides are only during
video signal
reduced.
input.
Sets the screen size to 16:9.
For SD signals, the two sides
are expanded.
4:3
16:9
Zoom
Enlarges the entire image.
* Not selectable in the case of
HD signals.
Auto
Positions the image at the
center with the entire image
enlarged.
Just
Displays the input image in the
actual size.
Full
Fills the entire screen with the
image with the size (aspect) of
the input image ignored.
0
Displayed
only during
PC signal
input.
This item is grayed out and cannot be adjusted when
there is no signal, signal is out of range, or during 3D
or 4K input.
3
Press the [MENU] button to exit
27
Viewing 3D Movies
By using the 3D Glasses (PK-AG1, PK-AG2, or PK-AG3) and 3D Synchro Emitter (PK-EM1 or PK-EM2), both sold
separately, you can enjoy 3D video images.
For 3D Glasses and 3D Synchro Emitter that are compatible with this unit, please refer to “Optional
Accessories”P. 9.
0
Installing the 3D Synchro Emitter
1
Connect 3D Synchro Emitter to the [3D SYNCHRO] terminal on the main unit
Installation Example
This Unit
Operate
3D GLASSES
PK-AG3
3D SYNCHRO EMITTER
PK-EM2
.
CAUTION
0
28
If PK-EM1 is used, adjust the position of the 3D Synchro Emitter such that the 3D Glasses can receive the signal
from the 3D Synchro Emitter.
For more details, please refer to the instruction manual of PK-EM1.
Viewing 3D Movies
1
Connect this unit to a 3D-compatible
HDMI device, and turn on the power
to play back the 3D video image
0
0
For details on how to play back 3D video images,
please refer to the instruction manual of the
player or recorder in use.
This unit supports the following 3D formats.
- Frame packing
- Side-by-side
- Top-and-bottom
Setting the 3D format
A Select “3D Format”
Format
Auto
Automatically determines and
sets the format upon receiving 3D
signal.
Side by Side
Select this setting if the 3D input
signal is of the side-by-side
format.
Top and Bottom
Select this setting if the 3D input
signal is of the top-and-bottom
format.
2D
Select this setting if 2D images
are falsely recognized as 3D
ones.
3D
FORMAT
COLOR
PROFILE
GAMMA
SETTINGS
C.M.D.
.
0
0
Pressing the [3D FORMAT] button each time
switches the mode in the following sequence:
“Auto” " “Side by Side” " “Top and Bottom” "
“2D” " “Auto”...
You can also perform setting from “Input
Signal”"“3D Setting”"“3D Format” in the
menu.
* In the default setting, “3D Format” is set to “Auto”
for automatic projection of 3D images.
2
Turn of the power of the 3D Glasses
and put them on
0
The PK-AG1 powers on automatically.
Adjusting 3D Movies
3D video images may appear differently to different
viewers. It may also be affected by your physical
condition at the time of viewing.
You are therefore recommended to adjust the video
images accordingly.
1
Adjusting parallax (Parallax)
Adjust the displacement of the image for the left
and right eyes separately to obtain the best 3D
effect.
0 To do so, use the H I keys to move the cursor.
0 Setting range: -15 to +15
Select “Input Signal”"“3D Setting”
from the menu
Adjusting crosstalk (Crosstalk Cancel)
Double images (overlapping of the left image with
the one on the right or vice versa) can be reduced
to deliver a clear quality.
0 To do so, use the H I keys to move the cursor.
0 Setting range: -8 to +8
2
Press the [MENU] button to exit
29
Operate
* If a signal cannot be displayed as 3D image,
selecting the format does not switch the signal
to a 3D image.
For more information on possible input signals,
please refer to (“Types of Possible Input
Signals”P. 76).
HDR
PICTURE
MODE
Description
Selecting an Image Quality According to the
Video Type
Setting the Picture Mode
You can adjust the image quality according to the type of video image you are viewing.
1
MODE 1
MODE 2
MODE 3
SETTING MEMORY
ANAMO.
Press the [PICTURE MODE] button, and use the [JK] keys
to select and set the desired “Picture Mode”
0
You can also perform the setting by pressing the [MENU] button to display
the menu followed by selecting “Picture Adjust”"“Picture Mode”.
0
You can also press the “Cinema”, “HDR” or “Natural” button to set the Picture
mode directly.
0
You can configure more detailed setting items by pressing the [MENU] button
to display the menu, followed by selecting “Picture Adjust”"“Picture Mode”
and pressing the [OK] button. (P. 46)
Item
Adjust/Set
HDR
1
PICTURE
MODE
COLOR
PROFILE
GAMMA
SETTINGS
Film*1 P Q
Reproduces faithfully the texture of movie films.
Cinema*1
Reproduces the image in vivid colors. Suitable for all
movies.
Animation*1
Suitable for animated works.
Natural*1
Image quality that focuses on natural color and gradation
reproduction. Suitable for drama footage, etc.
HDR*2
Making full use of the wide color gamut and contrast, this
mode is suited for viewing HDR contents such as Ultra HD
Blu-ray.
THX*1 P Q
Image quality certified by THX.
User 1 to User 5 *3
Enables user-defined image quality data to be saved and
retrieved.
C.M.D.
30
Description
*1
For Picture modes with the *1 mark, the optimal settings for 2D and 3D signals
are stored separately and applied automatically according to the selected mode.
0 Edited settings will also be saved separately.
0 No changes will be made to the Picture mode name.
*2
If HDR (high dynamic range) signal is detected, the picture mode will
automatically switch to “HDR”.
*3
To view videos that support the x.v.Color format, select a user setting (“User 1”
to “User 5”) in “Picture Mode”, and set “Color Profile” to “x.v.Color”.
Setting the Color Profile
By setting the “Color Profile” (color space information) according to the “Picture Mode”, you can fine-tune the image
quality according to the movie you are viewing.
1
Configure “Picture Mode” (P. 30), then select “Picture Adjust”"“Color Profile” in the
menu
0
The selectable “Color Profile” settings vary according to the “Picture Mode” and also whether the signal is 2D
or 3D.
List of “Color Profile” for “Picture Mode” R
Picture Mode
Cinema
2D Signal Input
3D Signal Input
Standard
Color space of the HDTV standard. *1
Cinema
—
—
3D Cinema
HDR
Animation
—
Standard
—
3D Animation
HDR
Natural
—
Standard
—
User 1 to User 5
Color space suitable for HDR content.
Color space that is suitable for animated works.
Color space suitable for 3D animation works.
Color space suitable for HDR content.
—
Color space that is suitable for drama footage, etc.
Adjust/Set
3D Video
HDR
HDR
Color space suitable for all 3D movies.
Color space of the HDTV standard. *1
Video
—
Color space suitable for all movies.
Color space of the HDTV standard. *1
Animation
—
Description
Color space suitable for 3D broadcasts.
Color space suitable for HDR content.
Standard
Color space of the HDTV standard. *1
Video
Color space that is suitable for drama footage, etc.
HDR
Color space suitable for HDR content.
Standard
Color space of the HDTV standard. *1
Cinema
Color space suitable for all movies.
Animation
Color space that is suitable for animated works.
Video
Color space that is suitable for drama footage, etc.
HDR
Color space suitable for HDR content.
Off
Disables color space adjustment.
3D Cinema
Color space suitable for all 3D movies.
3D Animation
Color space suitable for 3D animation works.
3D Video
Color space suitable for 3D broadcasts.
x.v.Color*2*3
Color space that is close to that of the x.v.Color standard.
Custom1 to Custom5
Saves the auto calibration values.
0 To perform auto calibration, you need to get ready a commercially
available optical sensor and the projector calibration software
program. For more details, please refer to our website.
*1
*2
*3
HDTV is the abbreviation for High Definition Television.
To view videos that support the x.v.Color format, select a user setting (“User 1” to “User 5”) in “Picture Mode”,
and set “Color Profile” to “x.v.Color”.
x.v.Color is a wide color space standard for used in videos; it includes wider color gamut than the HDTV standard.
31
List of “Color Profile” for “Picture Mode” P Q
Picture Mode
Film
3D Signal Input
Description
Film 1
2D Signal Input
—
Color space that is close to the characteristics of Eastman Kodak Company movie films.
Film 2
—
Color space that is close to the characteristics of FUJIFILM Corporation movie films.
Film 3
—
—
Cinema
Standard
Cinema 1
Cinema 2
—
Animation
—
3D Cinema
—
BT.2020
—
Standard
Color space suitable for HDR content.
Color space that is suitable for BT.2020.
Color space of the HDTV standard. *2
Color space that is suitable for CG animation works. Ideal for animated works with bright
colors.
Anime 2
—
Color space that is suitable for cel animation works. Ideal for animated works with light
colors.
3D Animation
HDR
—
BT.2020
—
Standard
Color space suitable for 3D animation works.
Color space suitable for HDR content.
Color space that is suitable for BT.2020.
Color space of the HDTV standard. *2
—
Adjust/Set
3D Video
Color space that is suitable for drama footage, etc. making use of the increased brightness.
Color space suitable for 3D video materials.
Reference
—
Color space that faithfully reproduces the video as it is.
HDR
—
Color space suitable for HDR content.
BT.2020
—
Color space that is suitable for BT.2020.
Standard
Color space of the HDTV standard. *2
Video
Color space that is suitable for drama footage, etc. making use of the increased brightness.
HDR
Color space suitable for HDR content.
BT.2020
THX*3
Color space that is suitable for BT.2020.
—
—
32
Color space that is close to that of the DCI standard.
Color space suitable for all 3D movies.
—
—
THX
Original JVC cinema-specific color gamut that achieves a balance between increased
brightness and color vividness.
Anime 1
Video
HDR
Color space suitable for digitally remastered piece of art based on a Technicolor film.
Color space suitable for 3D movies recorded in film.
Color space of the HDTV standard. *2
—
HDR
—
Natural
3D Film*1
3D THX*3
Color space of the THX standard.
Picture Mode
User 1 to User 5
2D Signal Input
3D Signal Input
Description
Standard
Color space of the HDTV standard. *2
Cinema 1
Original JVC cinema-specific color gamut that achieves a balance between increased
brightness and color vividness.
Cinema 2
Color space that is close to that of the DCI standard.
Anime 1
Color space that is suitable for CG animation works. Ideal for animated works with bright
colors.
Anime 2
Color space that is suitable for cel animation works. Ideal for animated works with light
colors.
Video
Color space that is suitable for drama footage, etc. making use of the increased brightness.
Reference
Color space that faithfully reproduces the video as it is.
HDR
Color space suitable for HDR content.
BT.2020
Color space that is suitable for BT.2020.
Off
Disables color space adjustment.
3D Cinema
Color space suitable for all 3D movies.
3D Animation
Color space suitable for 3D animation works.
3D Video
Color space suitable for 3D video materials.
x.v.Color*4*5
Color space of the x.v.Color standard.
Custom1 to Custom5
Saves the auto calibration values.
0 To perform auto calibration, you need to get ready a commercially available optical
sensor and the projector calibration software program. For more details, please refer
to our website.
The value is fixed during 3D signal input, and selection cannot be made.
*2
HDTV is the abbreviation for High Definition Television.
*3
Color Profile is fixed when “THX” is selected as the “Picture Mode”.
*4
To view videos that support the x.v.Color format, select a user setting (“User 1” to “User 5”) in “Picture Mode”,
and set “Color Profile” to “x.v.Color”.
*5
x.v.Color is a wide color space standard for used in videos; it includes wider color gamut than the HDTV standard.
Adjusting to the Preferred Color (Color Management)
Based on the setting of the selected “Color Profile”, you can adjust each of the following colors according to your
preference: Red, Yellow, Green, Cyan, Blue, and Magenta.
1
Press the [ADVANCED MENU] button to display the “Color Profile” menu
2
Set “Color Management” to “On”, and press the [OK]
button
0
You can also perform setting from “Picture Adjust”"“Color Profile”"“Color
Management” in the menu.
Picture Adjust
> Color Profile
Color Profile
Film 1
Color Management
0
Hue
0
Saturation
0
Brightness
0
Before
MENU
Off
On
Red
Axis Position
Reset
Operate
Exit
3
On
Color Selection
Select
Back
BACK
Adjust to the preferred color
33
Adjust/Set
*1
A Select “Color Selection”, and press the H I keys to
select the color to adjust
0
For color adjustment, select the color from the
following: “Red”, “Yellow”, “Green”, “Cyan”, “Blue”,
“Magenta”.
Green
B Adjust the selected color
Item
Setting Range
Axis Position -30 to 30
Saturation
-30 to 30
Adjusts the color
saturation (vividness).
-30 (dull) to +30 (vivid)
Adjusts the
brightness.
-30 (dark) to +30
(bright)
Selecting “Reset” resets all the adjustment data.
0
Adjust/Set
34
Fine-tune the position
of the central axis of
the selected color.
Adjusts the hue (color
tone).
0
4
Cyan
-30 to 30
-30 to 30
Yellow
Red
Description
Hue
Brightness
Adjustable range when
Red is selected: ± 30°
with Red as the center
Counterclockwise rotation: +
Clockwise rotation: -
Axis Position (Image)
Pressing the [HIDE] button on the remote control
enables you to check the image before
adjustment. Press the [HIDE] button again to
return to the adjustment screen.
Press the [MENU] button to exit
Blue
Magenta
Picture Adjust
> Color Profile
Color Profile
A
B
Film 1
Color Management
On
Color Selection
Red
Axis Position
0
Hue
0
Saturation
0
Brightness
0
Before
Reset
Operate
Exit
MENU
Select
Back
BACK
Adjusting Movies for Increased
Expressiveness (Multiple Pixel Control)
The new image-processing algorithm developed by JVC
helps to create a natural impression that is sharper at
areas in focus, and softer at areas that are not in focus,
enabling you to enjoy highly expressive 4K images with
a greater sense of depth.
1
Press the [MPC] button to display the
adjustment menu
0
You can also perform setting from “Picture
Adjust”"“MPC Level” in the menu.
Picture Adjust
>> MPC Level
On
2K
4K e-shift
Graphic Mode
Enhance
Smoothing
0
NR
0
Before
MENU
HIDE
0
“4K e-shift” is fixed at “On” during 4K signal input.
0
“Graphic Mode”, “Smoothing” and “NR” are grayed out
during 4K 50/60p signal input.
0
“4K e-shift” is fixed at “Off” during 3D signal input.
3
Press the [MENU] button to exit
Toggling between the States before
and during Adjustment
Reset
Operate
Select
Images are displayed in the original resolution (2K)
when “4K e-shift” is set to “Off”.
Pressing the [HIDE] button on the remote control enables
you to toggle between the states before adjustment and
during adjustment.
0
Exit
0
Back
BACK
.
Make adjustments according to your
preference based on the setting of the
selected “Picture Mode”
Adjust/Set
2
* The factory setting varies with the “Picture
Mode”.
Item
Setting
Description
4K e-shift
On (4K)/Off Switches the display
(2K)
resolution.
Graphic
Mode
4K/2K
Select whether the content
you are viewing is of high
sharpness such as graphics.
It is recommended to set to
“4K” when viewing content
mastered in 4K.
Enhance*
0 to 10
Enhances the sharpness of
the image.
Smoothing 0 to 10
Increase/decrease
background detail.
NR
Reduces the noise of the
video image.
0 to 10
* In the case of 4K 50/60p and other input signals, the
respective setting values are saved.
35
Fine-tuning the Image Quality
Adjusting the Output Value of the Projected Image (Gamma)
You can adjust the output value of the projected image with respect to the video signal input.
Example of gamma adjustment
Output Value
The overall image appear brighter with respect to the original image, making the dark areas more visible.
A
B
255
B
A
0
0
255
Input Value
The photos are for illustrative purposes only.
.
Output Value
Increases the contrast with respect to the original image, creating a greater sense of depth.
A
B
255
B
A
0
0
255
Input Value
Adjust/Set
The photos are for illustrative purposes only.
.
HDR
GAMMA
PICTURE
MODE
COLOR
PROFILE
GAMMA
SETTINGS
1
Press the [GAMMA] button
Pressing the [GAMMA] button each time switches the setting in sequence.
You can also perform the setting by pressing the [MENU] button to display
the menu followed by selecting “Picture Adjust”"“Gamma”.
* The setting value varies with the model in use, as well as the “Picture Mode”.
0
C.M.D.
0
Gamma Settings for Different “Picture Mode” R
Picture Mode
Cinema
Animation
Natural
HDR
User 1 to User 5
Selectable Settings
Description
Normal
Recommended setting for normal viewing.
A
Places more emphasis on the gradation compared to the
Normal setting.
B
Places more emphasis on the contrast compared to the
Normal setting.
C
Places more emphasis on the brightness compared to the
Normal setting.
HDR(ST.2084)
Suited for viewing HDR content such as UHD BD (HDR10).
HDR(Hybrid Log)
Suited for viewing HDR content such as HDR broadcast.
Custom 1 to Custom 3
Enables fine adjustment of gamma according to
preference.
* When “Color Profile” is set to “x.v.Color”, the setting is fixed at “Normal”.
36
Gamma Settings for Different “Picture Mode” P Q
Picture Mode
Selectable Settings
Film
When “Color Profile” is Film 1
set to “Film 1”
Film 2
When “Color Profile” is Film 1
set to “Film 2”
Film 2
Cinema
Animation
Natural
HDR
User 1 to User 5
Image is close to the characteristics of Eastman Kodak
Company movie films.
Places more emphasis on the gradation compared to the
“Film 1” setting.
Places more emphasis on the contrast compared to the
“Film 2” setting.
Image is close to the characteristics of FUJIFILM
Corporation movie films.
When “Color Profile” is Film 1
set to “Film 3”
Film 2
Places emphasis on the contrast.
When “Color Profile” is Film 1
set to “3D Film”
Film 2
Places emphasis on the contrast.
Custom 1 to Custom 3
Enables fine adjustment of gamma according to
preference.
Normal
Recommended setting for normal viewing.
A
Places more emphasis on the gradation compared to the
Normal setting.
B
Places more emphasis on the contrast compared to the
Normal setting.
C
Places more emphasis on the brightness compared to the
Normal setting.
HDR(ST.2084)
Suited for viewing HDR content such as UHD BD (HDR10).
HDR(Hybrid Log)
Suited for viewing HDR content such as HDR broadcast.
Custom 1 to Custom 3
Fine-tunes the gamma setting according to the user’s
preference.
THX
Video of the THX standard.
Places emphasis on the gradation.
Places emphasis on the gradation.
*1
When “Color Profile” is set to “x.v.Color”, the setting is fixed at “Normal”.
*2
When “Color Profile” is set to “THX”/“3D THX”, the setting is fixed at “THX”.
Fine-tuning to the Preferred Gamma Setting
You can perform fine adjustments based on the selected gamma adjustment setting.
1
Press the [ADVANCED MENU] button several times to display the gamma menu
0
You can also perform setting from “Picture Adjust”"“Gamma” in the menu.
Picture Adjust
> Gamma
Gamma
Custom 1
Correction Value
2.2
White
Color Selection
Picture Tone
0
Dark Level
0
Bright Level
0
Reset
Operate
Exit
MENU
Select
Back
BACK
37
Adjust/Set
THX
Description
2
Adjust to the preferred setting
0
Select the color to be adjusted from “Color Selection” and adjust the “Picture Tone”, “Dark Level” and “Bright
Level”.
Adjustment item and its setting
Item
Description
Setting
Color Selection
For selecting the color for adjusting “Picture Tone”, White / Red / Green / Blue
“Dark Level” and “Bright Level”.
Picture Tone
Adjusts the overall brightness automatically for a
well-balanced result without compromising the
gradation of the image.
-16 (darkens image for an underexposed
effect) to +16 (brightens image for an
overexposed effect)
Dark Level
Adjusts the dark areas of the input image.
0 To do so, use the H I keys to move the cursor.
-7 (darkens the shadows) to +7
(brightens the shadows)
Bright Level
Adjusts the bright areas of the input image.
0 To do so, use the H I keys to move the cursor.
-7 (darkens the highlights) to +7
(brightens the highlights)
* Adjustment cannot be made when “Color Profile” is set to “x.v.Color”.
Selecting the Default Value for Making Adjustments
0
0
When one of “Custom 1” to “Custom 3” is selected in “Gamma”, you can select a “Correction Value”.
Select the base “Correction Value” for adjustment using the H I keys.
List of selectable “Correction Value” according to “Picture Mode” R
Adjust/Set
Picture Mode
Cinema
Animation
Natural
HDR
User 1 to User 5
Correction Value
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
Normal
A
B
C
HDR(ST.2084)
HDR(Hybrid Log)
Import
38
List of selectable “Correction Value” according to “Picture Mode” P Q
Picture Mode
Film
Correction Value
Film 1
Film 2
Import
Cinema
Animation
Natural
HDR
User 1 to User 5
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
Normal
A
B
C
HDR(ST.2084)
Import
When “Correction Value” is set to “Import”
Selecting “Import” enables you to select the gamma data created externally. The factory setting for “Import” is the
same as the “Normal” setting.
0 You can use the projector calibration software to customize the gamma data adjustment, and import the created
gamma data.
For more details, please refer to our website.
http://www3.jvckenwood.com/english/download/index.html
0
39
Adjust/Set
HDR(Hybrid Log)
Gamma Adjustment
0
Gamma Curve
Bright
255
0
Output Value
A
0
D” D
Dark
B
0
0
0
255
Dark
C
Input Value
When the gamma curve is a straight line:
The brightness and contrast of the video input will be
the same as that of the video output.
Area for which the gamma curve is above the straight
line (A):
Video output appears brighter than the input.
Area for which the gamma curve is below the straight
line (B):
Video output appears darker than the input.
Area for which the slope of the gamma curve is steep
(midtone) (C):
The grayscale range of the video output becomes
wider, and the contrast increases (D"D’).
Bright
Gamma Adjustment When Viewing HDR Contents (Tone Mapping)
“HDR(ST.2084)” gamma is the PQ curve adopted by HDR10. Fine adjustments can be made according to the screen
size and environment although the default settings for viewing with the projector have been adjusted to allow optimum
viewing.
Default settings when viewing HDR contents of this projector
Adjust/Set
Picture Mode
Gamma
Estimated Screen Size
Estimated MaxCLL/MaxFALL
:
:
:
:
HDR
HDR(ST.2084)
90 to 120 inch (screen gain 1.0)
MaxCLL 1000 nits, MaxFALL 400 nits
Picture tone adjustment method
Picture Tone
0
.
When Picture Tone is set to “-”
(The entire screen becomes dark.)
0 Screen size is smaller than estimated
0 MaxFALL/MaxCLL value is higher than
estimated (P. 59)
0 Screen becomes brighter in the course of
viewing
When Picture Tone is set to “+”
(The entire screen becomes brighter.)
0 Screen size is bigger than estimated
0 MaxFALL/MaxCLL value is lower than
estimated (P. 59)
0 Screen becomes darker in the course of
viewing
.
Bright/dark area adjustment method
Dark Level
0
.
(+) To make the dark area information more
visible
(―) To enhance the contrast
.
Bright Level
0
.
(―) To enhance the gradation of highlight areas
(+) To enhance the contrast
.
40
Reducing the After-image of Fast-moving Images (Blur Reduction)
Low Latency
For changing the low latency setting.
You are recommended to set to “On” for content requiring split-second timing with the operation screen of PC signals
or games.
1
Press the [MENU] button to display the menu and select “Picture Adjust”"“Blur
Reduction”"“Low Latency”
Setting
Description
On
Performs the low latency setting.
Off
Does not perform the low latency setting.
If “Keystone” is set to other than “0”, the “Low Latency” is set to “Off” and grayed out.
0 If “Anamorphic” is set to other than “Off”, the “Low Latency” is set to “Off” and grayed out.
* “Clear Motion Drive” cannot be set when “Low Latency” is set to “On”.
0
Low Latency Mode
High bandwidth signals such as 4K 10-bit and 12-bit signals can be processed without being converted. This allows a
video to be shown without losing its original quality, thereby enabling the enjoyment of contents such as movies and
concerts at higher quality.
Adjust/Set
41
Clear Motion Drive (C.M.D.)
Optimal interpolation according to the content is made possible with the new high-definition image interpolation
technique that supports 3D images.
For some scenes, interpolation may cause distortion in the image. In this case, set to “Off”.
Original Image
Interpolation Enabled
Intermediate Frame Generation
.
HDR
PICTURE
MODE
COLOR
PROFILE
GAMMA
SETTINGS
1
Press the [C.M.D.] button
0
C.M.D.
Intermediate Frame Generation
Pressing the [C.M.D.] button each time switches the mode in the following
sequence: “Off”"“Low”"“High”"“Inverse Telecine”"“Off”...
Setting
Description
Adjust/Set
Off
Interpolation is not performed.
Low
Improves motion lag for movie type images.
High
Improves motion lag fast moving sports type images.
Inverse Telecine
60i/60p video images such as those of TVs and DVDs.
Suitable for original images that are 24-frame film sources.
0 Does not function for 24p video images.
* C.M.D. is the abbreviation for Clear Motion Drive.
* This item cannot be set when “Low Latency” is set to “On”.
Motion Enhance
Optimal image quality with reduced image blurring is made possible by enhancing the responsiveness of the liquid
crystal device.
If the image outline is unnatural, set this item to “Off”.
1
Press the [MENU] button to display the menu and select “Picture Adjust”"“Blur
Reduction”"“Motion Enhance”
Setting
Description
Off
Does not perform correction.
Low
Reduces image blurring.
High
Further reduces image blurring than “Low”.
42
Viewing High Contrast Images (Lens Aperture)
JVC has developed an image analysis algorithm, which analyzes the state of the video image in real time, and controls
the aperture dynamically according to the image information.
This technology enables viewers to enjoy video images with enhanced contrast.
1
Press the [LENS AP.] button
Pressing the [LENS AP.] button each time switches the setting in sequence.
MODE 1
MODE 2
MODE 3
SETTING MEMORY
ANAMO.
Setting
Description
Auto 1
Image contrast is enhanced.
Auto 2
Places emphasis on the gradation.
Manual
Does not perform dynamic control.
Select this setting to perform adjustment manually.
*1
Manual adjustment is disabled in the “Auto 1” and “Auto 2” setting.
To perform adjustment manually, select “Manual”.
*2
When the setting is changed to Auto after performing manual adjustment, the
value set manually will be used as the aperture value for Auto.
Adjust/Set
43
Adjustments and Settings in the Menu
Pressing the [MENU] button displays the menu.
Press the [JKH I] keys to select an item, followed by pressing the [OK] button to confirm the selection.
List of Menu Items
Picture Adjust
Picture Mode ................................................................................................................................................... P. 30
9 Clear Black ................................................................................................................................................. P. 46
9 Lamp Power ............................................................................................................................................... P. 46
9 Lens Aperture ............................................................................................................................................. P. 46
9 User Name Edit .......................................................................................................................................... P. 46
I Color Profile ..................................................................................................................................................... P. 31
Color Management ......................................................................................................................................... P. 33
I Color Temp. ..................................................................................................................................................... P. 47
I Gamma ............................................................................................................................................................ P. 36
9 Picture Tone ............................................................................................................................................... P. 38
9 Dark Level / Bright Level ............................................................................................................................. P. 38
I MPC Level ....................................................................................................................................................... P. 35
I Blur Reduction ................................................................................................................................................. P. 41
I Contrast ........................................................................................................................................................... P. 48
I Brightness ....................................................................................................................................................... P. 48
I Color ................................................................................................................................................................ P. 49
I Tint .................................................................................................................................................................. P. 49
I
Adjust/Set
Input Signal
Input Level ....................................................................................................................................................... P. 49
Color Space ..................................................................................................................................................... P. 49
I Aspect ............................................................................................................................................................. P. 50
I Progressive ...................................................................................................................................................... P. 50
I Mask ................................................................................................................................................................ P. 50
I 3D Setting ........................................................................................................................................................ P. 28
I Picture Position ................................................................................................................................................ P. 50
IHDMI2 EDID ..................................................................................................................................................... P. 50
I
I
44
Installation
Lens Control .................................................................................................................................................... P. 23
9 Focus ......................................................................................................................................................... P. 23
9 Zoom .......................................................................................................................................................... P. 23
9 Shift ............................................................................................................................................................ P. 23
9 Image Pattern ............................................................................................................................................. P. 51
9 Lock ........................................................................................................................................................... P. 51
9 Lens Memory Select ................................................................................................................................... P. 25
9 Lens Memory Save .................................................................................................................................... P. 24
9 Lens Memory Name Edit ............................................................................................................................ P. 25
9 Lens Center ................................................................................................................................................ P. 51
9 Lens Cover P Q ......................................................................................................................... P. 51
I Pixel Adjust ...................................................................................................................................................... P. 52
I Installation Style ............................................................................................................................................... P. 53
I Keystone ......................................................................................................................................................... P. 53
I Anamorphic ..................................................................................................................................................... P. 53
I High Altitude Mode .......................................................................................................................................... P. 53
I Screen Adjust .................................................................................................................................................. P. 26
I
Display Setup
Back Color .......................................................................................................................................................
Menu Position ..................................................................................................................................................
I Signal Display ..................................................................................................................................................
I Logo ................................................................................................................................................................
I Language ........................................................................................................................................................
I
I
P. 57
P. 57
P. 57
P. 57
P. 57
Trigger ............................................................................................................................................................. P. 57
Off Timer .......................................................................................................................................................... P. 57
I ECO Mode ....................................................................................................................................................... P. 58
I Network ........................................................................................................................................................... P. 58
I Remote Code .................................................................................................................................................. P. 59
I Lamp Reset ..................................................................................................................................................... P. 62
I
I
Information
I
Information ....................................................................................................................................................... P. 59
45
Adjust/Set
Function
Picture Adjust
Picture Mode
You can adjust the image quality according to the type of video image you are viewing.
Æ “Setting the Picture Mode” (P. 30)
You can configure the following setting items by pressing the [MENU] button to display the menu, followed by selecting
“Picture Adjust”"“Picture Mode” and pressing the [OK] button.
Clear Black
Adjusts the difference in brightness in an image electrically to produce an image with contrast.
Setting
Description
Off
Does not perform correction.
Low
Mode with a mild effect.
High
Mode with a strong effect.
Lamp Power
The brightness of the lamp can be set to “Low” or “High”.
0
The factory setting varies with the “Picture Mode”.
0
Continuous use at the “High” setting may cause the lamp to darken faster.
Lens Aperture
Adjust/Set
JVC has developed an image analysis algorithm, which analyzes the state of the video image in real time, and controls
the aperture dynamically according to the image information.
This technology enables viewers to enjoy video images with enhanced contrast.
Æ “Viewing High Contrast Images (Lens Aperture)” (P. 43)
0
Stopping down the aperture reduces the brightness and increases the contrast.
0
Setting range: -15 (stops down) to 0 (opens up)
User Name Edit
You can edit the “User 1” to “User 5” names in the Picture mode.
0
Characters that are usable include alphabets (upper or lower case), numeric characters, and symbols.
0
Enter not more than 10 characters.
Picture Adjust
>> User Name Edit
Input Cursor
Name User 1
Selection Cursor
B
C
D
E
F
G
H
I
J
K
L
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
g
h
i
j
k
l
m
z
n
o
p
q
r
s
t
y
v
w
x
y
1
2
3
4
5
6
7
8
9
0
,
.
^
!
"
#
$
%
&
*
+
-
/
=
?
@
;
|
~
(
)
<
>
[
]
{
}
\
:
SPACE
Clear
MENU
46
All Clear
Operate
Exit
.
M
A
Select
OK
Back
BACK
After entry is complete, select
“OK” and press the [OK] button
Color Profile
By setting the “Color Profile” (color space information) according to the “Picture Mode”, you can fine-tune the image
quality according to the movie you are viewing.
Æ “Setting the Color Profile” (P. 31)
Color Management
Each of the colors is adjustable according to the user’s preference.
Æ “Adjusting to the Preferred Color (Color Management)” (P. 33)
Color Temp.
For setting the color temperature of the video image.
0
When “Picture Mode” is set to “THX” and when “Color Profile” is set to “x.v.Color”, the setting is fixed at 6500K.
Preset
Setting
Xenon 1, Xenon 2 P Q
* Selectable when “Picture Mode” is set to
“Film” or “Cinema”.
Description
Color temperature that reproduces the characteristics of a xenon lamp
used in cinemas.
0
Xenon 1: A light source color that is emitted by a film projector
0
Xenon 2: A light source color emitted by a projector used for digital
cinema
Increasing the value enhances the blue tone of the video image, while
decreasing the value enhances the red tone.
Custom 1, Custom 2
The color temperature of video images can be adjusted manually and
saved as one of the three customized settings.
HDR
Color temperature suitable for viewing HDR content.
High Bright
Color temperature that gives priority to brightness.
Custom
Setting
Gain Red, Gain Green, Gain Blue
Description
Adjusts each color in the bright parts of the video image.
0
Offset Red, Offset Green, Offset Blue
Setting range: -255 (reduces the red/green/blue tone) to 0
(enhances the red/green/blue tone)
Adjusts each color in the dark areas of the video image.
0
Setting range: -50 (reduces the red/green/blue tone) to +50
(enhances the red/green/blue tone)
Gamma
You can adjust the output value of the projected image with respect to the video signal input.
Æ “Adjusting the Output Value of the Projected Image (Gamma)” (P. 36)
Picture Tone
Adjusts the overall brightness automatically for a well-balanced result without compromising the gradation of the image.
Æ “Fine-tuning to the Preferred Gamma Setting” (P. 38)
Dark Level / Bright Level
You can adjust the image quality to produce a sharp contrast in the brightness.
Æ “Fine-tuning to the Preferred Gamma Setting” (P. 38)
47
Adjust/Set
5500K, 6500K, 7500K, 9300K
MPC Level
You can enjoy natural, expressive 4K images with a stronger sense of depth.
Æ “Adjusting Movies for Increased Expressiveness (Multiple Pixel Control)” (P. 35)
4K e-shift
Switches the display resolution.
Setting values: On (4K), Off (2K)
0
Graphic Mode
For selecting whether the content you are viewing is of high sharpness such as graphics.
It is recommended to set to “4K” when viewing content mastered in 4K.
Setting values: 4K, 2K
0
Enhance
For adjusting the high-frequency areas. Increasing the value enhances the definition for a sharper image quality.
Setting range: 0 to 10
0
* In the case of 4K 50/60p and other input signals, the respective setting values are saved.
Smoothing
For adjusting the low-frequency areas. Increasing the value enhances the blurriness of the image for a softer effect.
Setting range: 0 to 10
0
NR
Prevents noise from becoming too pronounced.
Setting range: 0 (weak) to 10 (strong)
0
Adjust/Set
MEMO
“4K e-shift” is fixed at “On” during 4K signal input.
0
0
“Graphic Mode”, “Smoothing” and “NR” are grayed out during 4K 50/60p signal input.
0
“4K e-shift” is fixed at “Off” during 3D signal input.
Blur Reduction
For reducing the after-image, which occurs in a fast-moving scene.
Contrast
For adjusting the difference in brightness to produce an image with contrast.
0
Setting range: -50 (little difference in brightness) to +50 (large difference in brightness)
* Adjustment cannot be made when “Color Profile” is set to “x.v.Color”.
Brightness
For adjusting the brightness of the video image.
0
Setting range: -50 (darker) to +50 (brighter)
* Adjustment cannot be made when “Color Profile” is set to “x.v.Color”.
48
Color
For adjusting the color density of the video image.
0
Setting range: -50 (lighter) to +50 (deeper)
* Adjustment cannot be made when “Color Profile” is set to “x.v.Color”.
Tint
For adjusting the hue of the video image.
0
Setting range: -50 (reddish) to +50 (greenish)
* Adjustment cannot be made when “Color Profile” is set to “x.v.Color”.
Input Signal
Input Level
For setting the dynamic range (gradation) of the video input.
If the image is not displayed properly even after selecting “Auto”, select an appropriate setting.
0
If the dynamic range is not appropriate, the bright areas become overexposed, and the dark areas become
underexposed.
Setting
Description
Sets the input signal level automatically.
Standard
Select this setting if you are inputting video signals (dynamic range: 16 - 235).
Enhanced
Select this setting if you are inputting PC signals (dynamic range: 0 - 255).
Super White
Select this setting when inputting Super White-compatible device signals (dynamic
range: 16 - 255).
Color Space
For setting the color space of the input signal.
If the image is not displayed properly even after selecting “Auto”, select an appropriate setting.
Setting
Description
Auto
Detects “YCbCr (4:4:4)”, “YCbCr (4:2:2)”, and “RGB” automatically.
YCbCr (4:4:4)
Select this setting when inputting YCbCr (4:4:4) video signals.
YCbCr (4:2:2)
Select this setting when inputting YCbCr (4:2:2) video signals.
RGB
Select this setting when inputting RGB video signals.
49
Adjust/Set
Auto
Aspect
The screen size of the projected image can be adjusted optimally according to the original screen size (aspect) that
has been input.
Æ “Adjusting the Screen Size (Aspect)” (P. 27)
Progressive
For setting the interpolation method for the interlaced signals. If the image outline is unnatural, set this item to “Off”.
Setting
Description
Auto
Performs interpolation by automatically detecting whether the interlaced signals
are converted from 24p video images, such as those in film movies, or interlaced
signals of video materials.
Off
Interpolates video images as interlaced signals of video materials, etc.
Mask
For hiding the peripheral area of the image with a mask (black strip).
Off
On
Setting
Description
Off
Not masked.
Custom 1 to Custom 3
Masks about 0 to 220 pixels of the four sides of the
image.
* The pixel count is 1920 pixels in the horizontal
direction and 1080 pixels in the vertical direction.
Adjust/Set
Mask: black strip around the periphery
3D Setting
For setting 3D movies for viewing.
Æ “Viewing 3D Movies” (P. 28)
Picture Position (Horiz./Vert.)
Adjust the position if the edges of the image are partially missing due to the timing of horizontal and vertical
synchronization signals.
* Adjustment cannot be made during 4K, 3D and 1080i signal input.
HDMI2 EDID
For changing the EDID mode of the [HDMI 2] terminal. Set to “A” under normal condition.
Images with resolution 1920x1080 or lower may not be displayed when some old devices are used.
In that case, connect to the [HDMI 2] terminal and set “HDMI2 EDID” to “B”.
* EDID (Extended Display Identification Data) refers to the information, such as supported resolutions, exchanged
between devices.
50
Installation
Lens Control
Focus / Zoom / Shift
For adjusting the lens according to the projection position
Æ “Adjusting the Lens According to the Projection Position” (P. 23)
Image Pattern
Setting
Description
On
Displays the lens adjustment pattern.
Off
Displays external signals, and does not display the lens adjustment pattern.
Lock
Setting
On
Description
Locks the lens to prevent any erroneous operation on the adjustments.
0
Off
When “On” is selected, all lens control functions other than “Lens Memory
Select” cannot be operated.
Does not lock the lens.
Lens Memory Select / Lens Memory Save / Lens Memory Name Edit
Adjust/Set
The Focus, Zoom, and Shift settings can be saved or retrieved, so you can switch easily to a different aspect ratio
(screen size) according to the image.
Æ “Saving and Retrieving Adjustment Settings” (P. 24)
Lens Center
Returns the lens position to the center.
Lens Cover P Q
Setting
Description
Auto
Opens/closes the lens cover according to the power on/off operation.
Open
Leaves the lens cover open regardless of the power on/off mode.
51
Pixel Adjust
Adjust
For setting the adjustment feature to On (Memory 1 or Memory 2) or Off.
* You can save the settings separately when an anamorphic lens is used and when you are using the projector with
a screen.
Adjust Area
Setting
Description
Whole
Adjusts the entire image.
Zone
Enables fine adjustment of each zone by dividing the screen into 11 vertical x 11
horizontal zones.
Adjust Color
For selecting the color to adjust (“Red” or “Blue”).
Adjust Pattern Color
For setting the color of the adjustment pattern displayed during adjustment to “White” or “Yellow / Cyan”.
Adjust (Pixel)
When “Adjust Area” is set to “Whole”, adjustment can be made by moving in units of one pixel on the screen of the color
selected in “Adjust Color”.
Æ “Whole Adjust (Pixel) Operation Procedure” (P. 54)
0
Adjustment cannot be made when “Adjust Area” is set to “Zone”.
Adjust/Set
Setting
Description
H (Horizontal)
Setting range: -2 (moves red/blue to the left) to +2 (moves red/blue to the right)
V (Vertical)
Setting range: -2 (moves red/blue downward) to +2 (moves red/blue upward)
Adjust (Fine)
When “Adjust Area” is set to “Whole”, adjustment can be made by moving in units of 1/16 pixel on the screen of the
color selected in “Adjust Color”.
Æ “Whole Adjust (Fine) Operation Procedure” (P. 55)
When “Adjust Area” is set to “Zone”, the screen is divided into 11 vertical x 11 horizontal zones, and fine adjustment of
each zone is possible.
Æ “Zone Adjust Operation Procedure” (P. 56)
Setting
Description
H (Horizontal)
Setting range: -31 (moves red/blue to the left) to +31 (moves red/blue to the right)
V (Vertical)
Setting range: -31 (moves red/blue downward) to +31 (moves red/blue upward)
Reset
Restores all pixel adjustment data to the factory default.
52
Installation Style
For setting to “Front”, “Ceiling Mount (F)”, “Rear”, or “Ceiling Mount (R)” according to the installation status of the
projector.
0
“Front” or “Ceiling Mount (F)” is set when projector is installed in the front with respect to the screen.
0
“Rear” or “Ceiling Mount (R)” is set when projector is installed in the rear with respect to the screen.
Keystone
For correcting any keystone distortion that occurs when the projector is installed at an angle with respect to the screen.
0
Vertical setting range: -16 to +16
*1
Increasing the value changes the aspect slightly.
*2
Adjustment cannot be made during 4K 50/60p signal input.
Anamorphic
Configure this setting when an anamorphic lens is used.
Setting
Description
A
Projects the 2.35:1 image with it stretched in the vertical direction only.
B
Projects the 16:9 image with it compressed in the horizontal direction only.
Off
Projects image without any scaling.
High Altitude Mode
Set to “On” when using the projector at a location of low atmospheric pressure (higher than 900 m above sea level).
Adjust/Set
Screen Adjust
By selecting the optimal correction mode according to the characteristics of the screen in use, corrections can be
performed to reproduce natural images with balanced colors.
Æ “Setting Screen Correction” (P. 26)
53
Whole Adjust (Pixel) Operation Procedure
For making general adjustments to slight color fringing in the horizontal/vertical directions of the video image.
A Set “Adjust Area” to “Whole”
B Select “Adjust Color” and “Adjust Pattern Color”
C Select “Adjust (Pixel)”, and press the [OK] button
0
The Adjustment mode is activated, and the selected adjustment pattern and Adjustment (Pixel) window are
displayed.
Adjustment (Pixel) Window
V (Vertical)
Adjustment Pattern
Pixel Adjust
Whole Adjust (Pixel)
Red
H 0
V 0
Color A.
GAMMA
Adjust. Color P. A. Area
COLOR
TEMP
3D
FORMAT
PIC.
ADJ.
Select Back
Operate
BACK
H (Horizontal)
.
D Press the [OK] button to enter the Adjustment mode
E Use the [JKH I] keys to move and adjust the vertical and horizontal pixels of the entire zone
0
The adjustment setting appears at the center of the Adjustment (Pixel) window.
Adjust/Set
Pixel Adjust
Pixel Adjustment Setting
Whole Adjust (Pixel)
Red
Color for
Adjustment
H 0
V 0
Color A.
GAMMA
Adjust. Color P. A. Area
COLOR
TEMP
3D
FORMAT
PIC.
ADJ.
Select Back
Operate
BACK
Remote Control Operation
Guide
.
F After adjustment is complete, press the [BACK] button twice to exit the Adjustment mode
Remote Control Operation Guide
Button Name
Description of Operation
[GAMMA]
Changes “Adjust Color”.
[COLOR TEMP.]
Switches between “Adjust (Pixel)” and “Adjust (Fine)”.
0
Switches to “Adjust (Pixel)” when “Adjust Area” is set to “Zone”.
[3D FORMAT]
Changes “Adjust Pattern Color”.
[PIC ADJ.]
Switches “Adjust Area”.
0
54
A zone cursor appears on the adjustment pattern when the “Zone” setting is selected.
Whole Adjust (Fine) Operation Procedure
For making general adjustments on the misalignment of the entire screen using “Adjust (Pixel)”, followed by making
fine adjustments.
A Set “Adjust Area” to “Whole”
B Select “Adjust Color” and “Adjust Pattern Color”
C Select Adjust (Fine), and press the [OK] button
0
The Adjustment mode is activated, and the selected adjustment pattern and Fine window are displayed.
0
The adjustable range may be smaller depending on the pixels being adjusted on the entire screen.
Fine Window
V (Vertical)
Adjustment Pattern
Pixel Adjust
Red
Whole Adjust (Fine)
H 0 (0 / 0)
V 0 (0 / 0)
Color A.
GAMMA
Adjust. Color P. A. Area
COLOR
TEMP
3D
FORMAT
PIC.
ADJ.
Select Back
Operate
BACK
H (Horizontal)
.
D Press the [OK] button to enter the Adjustment mode
E Use the [JKH I] keys to move and adjust the vertical and horizontal pixels of the entire zone
The adjustment setting appears at the center of the Fine window.
Adjust/Set
0
Pixel Adjust
Pixel Adjustment Setting
Whole Adjust (Fine)
Color for
Adjustment
Red
H 0 (0 / 0)
V 0 (0 / 0)
Color A.
GAMMA
Adjust. Color P. A. Area
COLOR
TEMP
3D
FORMAT
PIC.
ADJ.
Select Back
Operate
BACK
Remote Control Operation
Guide
Adjustment Setting
H −20 (−20 / −20)
V
5 ( 5/
5)
Indicates the maximum and
minimum misalignment value of
the entire screen.(Max. / Min.)
.
F After adjustment is complete, press the [BACK] button twice to exit the Adjustment mode
MEMO
0
If both the maximum overall screen misalignment of H (horizontal direction) and V (vertical direction) are “31”, you
cannot select a value that is larger than the displayed setting even when the adjustment setting is lower than the
maximum value.
0
If the minimum overall screen misalignment is “-31”, you cannot select a value that is smaller than the displayed
setting even when the adjustment setting is higher than the minimum value.
55
Zone Adjust Operation Procedure
For fine-tuning misalignments on a part of the screen after adjusting the overall screen misalignment using “Adjust
(Pixel)” and “Adjust (Fine)”.
0 The screen can be divided vertically and horizontally into 10 sections for partial adjustments to be made.
A Set “Adjust Area” to “Zone”
B Select “Adjust Color” and “Adjust Pattern Color”
C Select Adjust (Fine), and press the [OK] button
0
The Adjustment mode is activated, and the selected adjustment pattern and Zone Adjustment window are
displayed.
0
The adjustable range may be smaller depending on the pixels being adjusted on the entire screen.
Adjustment Pattern
Zone Adjustment Window
V (Vertical)
Zone Cursor
Pixel Adjust
Zone Adjust
Red
Position
0 / 0
H 0
V 0
Select Back
Operate
BACK
Color A. Adjust. Color P. A. Area
GAMMA
COLOR
TEMP
3D
FORMAT
PIC.
ADJ.
H (Horizontal)
.
D Press the [JKH I] keys to move the cursor to the point to be adjusted
Adjust/Set
E Press the [OK] button to enter the Adjustment mode
F Use the [JKH I] keys to move and adjust the vertical and horizontal pixels of the entire zone
0
The adjustment setting appears at the center of the Zone Adjustment window.
Pixel Adjust
Pixel Adjustment Setting
Color for
Adjustment
Red
Zone Adjust
Position
0 / 0
H 0
V 0
Color A. Adjust. Color P. A. Area
GAMMA
COLOR
TEMP
3D
FORMAT
PIC.
ADJ.
Select
Back
Operate
BACK
Remote Control Operation
Guide
Cursor Position
Position
H −31
V 7
8 / 5
Adjustment Setting
.
G After adjustment is complete, press the [BACK] button twice to exit the Adjustment mode
56
Display Setup
Back Color
For setting the color of the background to “Blue” or “Black” when there is no signal input.
Menu Position
For setting the display position of the menu.
Signal Display
Setting
Description
On
Shows the input terminal for 5 seconds when input is switched.
Off
Not displayed.
Logo
Setting
Description
On
Displays the “D-ILA” logo for 5 seconds during startup.
Off
Not displayed.
Adjust/Set
Language
For setting the display language to “日本語”, “English”, “Deutsch”, “Español”, “Italiano”, “Français”, “Português”,
“Nederlands”, “Svenska”, “Norsk”, “Русский”, “中文”, or “繁體中文”.
Function
Trigger
For setting whether to supply a 12 V output to devices such as an external screen equipped with a trigger function.
Setting
Description
Off
No output.
On (Power)
Outputs control signals (12 V) from the trigger terminal when the power is turned
on.
0
On (Anamo)
When the power is turned off, the control signal output is stopped when the
cooling function starts.
Outputs control signals when the “Anamorphic” setting is switched from “Off” to “A”
or “B”.
Off Timer
For setting the duration before the power turns off automatically when the projector is not operated.
0
Setting values: “Off”, “1 Hour”, “2 Hours”, “3 Hours” and “4 Hours”
57
ECO Mode
Setting
Description
On
Enables “ECO Mode” to minimize power consumption in the Standby mode.
Off
0
RS-232C / LAN communication cannot be used in the Standby mode.
0
If there is no signal transmission and operation for 20 minutes while an image
is projected, the power management switches the equipment automatically into
standby mode.
Select this option to control via RS-232C / LAN communication in the Standby
mode or if Control4 is to be used.
Network
For specifying the settings for external control from a PC or smartphone.
Setting
DHCP Client
Setting
Description
On
Obtains the IP address automatically from the DHCP server inside the connected
network.
Off
For configuring the network settings manually.
Adjust/Set
IP Address
For configuring the IP address.
Subnet Mask
For configuring the subnet mask.
Default Gateway
For configuring the default gateway.
MAC Address
Displays the MAC address of the unit.
Set
Applies the network settings.
Control4
Set to “On” to allow Control4 SDDP to detect this unit.
When this unit is not connected to an environment under the control of the controller
and Control4 SDDP from the Control4 Corporation, set this to “Off”.
Glossary of Network Terminology
DHCP
IP Address
Subnet Mask
Default Gateway
MAC Address
58
: Abbreviation for Dynamic Host Configuration Protocol. This is a protocol for the network
to assign an IP address automatically to the connected device.
: Numeric characters for identifying the device that is connected to the network.
: Numeric characters that define the bit count used for the network address that is a
segment of the IP address.
: Server for communicating beyond the network that is divided by the subnet mask.
: Abbreviation for Media Access Control address. This is a number that is unique to each
network adapter. Each of the network adapters is assigned with a unique MAC address.
Remote Code
For changing the remote control code.
Setting
A
Description
Change the remote control code from “B” to “A”.
B
Change the remote control code from “A” to “B”.
0
You need to configure the remote control according to the settings of this unit.
On the remote control unit, press the [MENU] and [BACK] buttons at the same time for three seconds or longer to
switch the code.
0
The backlight of the remote control blinks 3 times: change the remote control code to “A”
0
The backlight of the remote control blinks 2 times: change the remote control code to “B”
Lamp Reset
For resetting the lamp time to “0”.
Æ “Resetting the Lamp Time” (P. 62)
Information
Setting
Input
Description
Displays video input terminal.
Source
Displays the input source.
(Displayed only during video signal input)
Adjust/Set
Resolution
Displays the image resolution.
(Displayed only during PC signal input)
H Frequency
Displays the horizontal frequency.
(Displayed only during PC signal input)
V Frequency
Displays the vertical frequency.
(Displayed only during PC signal input)
Color Space
Displays the color space and color bit depth of the input video signal.
0 The color bit depth is not displayed when YCbCr (4:2:2) is input.
0 The color bit depth is displayed when color bit depth information is received
from the source device.
Colorimetry
Displays the colorimetry of the input video signal.
HDR
Displays the EOTF information when HDR packet is received.
Max CLL / Max FALL
Displays the mastering information of the contents during HDR playback.
Max CLL: Maximum Content Light Level
Max FALL: Maximum Frame Average Light Level
0 The information may not be displayed depending on the player and contents.
Lamp Time
Displays the lamp time.
Soft Ver.
Displays the firmware version.
Color Depth
59
Replacing the Lamp
The lamp is a consumable item. If the image appears dark or the lamp goes out, replace the lamp unit.
When the lamp replacement time approaches, the user is notified with a message displayed on the screen and by
the indicator. (P. 77)
0
Lamp Replacement Procedure
CAUTION
Maintenance
0
Do not insert your hands into the lamp compartment.
This could cause significant deterioration in the
performance of the equipment, or lead to injury and
electric shock.
0
Do not replace the lamp immediately after the unit has
been used. Allow a cooling period of at least one hour
before replacement. The temperature of the lamp is
still high, and may cause burn injuries.
0
Do not subject the lamp unit to shock. Doing so may
cause lamp blowout.
0
Do not use a flammable air duster to clean the internal
parts of the unit. Doing so may cause fire.
0
Use only genuine replacement parts for the lamp unit.
Also, never attempt to reuse an old lamp unit. This
may cause the unit to malfunction.
0
Do not touch the surface of a new lamp. Doing so may
shorten the lamp life and cause lamp blowout.
0
When replacing the lamp, be careful not to injure
yourself as the lamp may be broken.
0
When replacing the lamp of a projector suspended
from the ceiling, work at height is required. This is a
dangerous operation. Please consult our service
center.
1
Pull out the power plug from the power
outlet
2
Remove the lamp cover
3
Loosen the screws of the lamp unit
Loosen the screws with a t screwdriver.
0
.
4
Pull out the lamp unit
0
Hold the lamp unit at the dents at the top and
bottom, and pull it out.
Remove the screw of the lamp cover with a t
screwdriver.
0
.
.
60
5
Install the new lamp unit
MEMO
Usable lamp life
0
When the lamp is used with “Lamp Power” set to
“Low”, the lamp life on this unit is approximately 4500
hours. This is the average usable time and not a
guaranteed value.
0
The lamp life may not reach 4500 hours depending on
the operating conditions.
0
When the lamp has reached the end of its usable life,
deterioration progresses rapidly.
0
When the video image appears dark, when the color
tone looks unnatural, or when the image flickers,
replace the lamp unit with a new one promptly.
.
6
Tighten the screws of the new lamp
unit
Tighten the screws with a t screwdriver.
0
Purchasing a lamp unit
Please consult your authorized dealer or nearby service
center.
0
Lamp unit
Product no.: PK-L2615U
* Not suitable for household room illumination.
* Lamps with a different product number or those for
other projector models cannot be used.
Information about the lamp
An ultra-high pressure mercury lamp with a high internal
pressure is used in the projector.
Due to the characteristics of this lamp, it may blow out
with a loud noise or go out when it is subject to shock or
after using for a prolonged period of time (the time before
the lamp blows out or goes out varies considerably with
each lamp as well as the operating conditions).
.
Attach the lamp cover
0
Insert the two tabs at the top and bottom of the
lamp cover into the unit.
0
Tighten the screws with a t screwdriver.
After replacing the lamp
0
Do not place the removed lamp unit at a place that is
within reach by children or anywhere near
inflammable items.
0
Dispose used lamp units in the same way as
fluorescent lamps. Follow the regulations of your local
community for disposal.
.
61
Maintenance
7
Resetting the Lamp Time
Reset the lamp time when you have replaced the lamp.
It provides an estimated timing for lamp replacement
Resetting the lamp time from the menu
screen
Press the [MENU] button to display
the menu
1
Select “Function”"“Lamp Reset”
from the menu
2
Resetting the lamp time using the remote
control
1
Insert the power plug into the power
outlet
2
Make sure that you operate the
remote control in the Standby mode
(the power plug is inserted into the
outlet, but the power is not turned on)
Function
Trigger
Off
Off Timer
Off
ECO Mode
Off
0
Press in the order as shown.
0
Make sure that you press a button within two
seconds after the last button is pressed.
Press the last button for at least two seconds.
Network
A
Remote Code
Lamp Reset
Operate
Exit
MENU
Select
Back
BACK
.
On the “Reset Lamp Time?” screen,
select “Yes” and press the [OK] button
3
0
Press for 2
seconds or longer
.
0
The lamp time is reset to zero.
The “LAMP” indicator and “STANDBY/ON”
indicator blink alternately for three seconds.
After that, the unit switches to the Standby
mode.
Reset Lamp Time?
Yes
MEMO
No
.
0
Maintenance
Reset the lamp time only when you have replaced the
lamp.
If the lamp time is reset while a lamp is in use, you may
lose track of the timing for replacing the lamp. Doing
so may result in using the lamp beyond the estimated
limit, thereby causing lamp blowout.
Maintaining the Cabinet and Remote Control
0
Gently wipe off dirt on the cabinet with a soft cloth.
0
If it is extremely dirty, wet a cloth in water, wring dry and use it to wipe off the dirt, followed by wiping again with a
dry cloth.
0
Pay attention to the following as the cabinet may deteriorate in condition or the paint may come off.
0
62
Do not wipe with thinner or benzine
0
Do not allow prolonged contact with rubber or plastic products
0
Do not spray volatile chemicals such as insecticide
Cleaning and Replacing the Filter
Clean the filter regularly Otherwise, the air intake
efficiency may deteriorate, and malfunction may occur.
3
Reinstall the inner filter
CAUTION
0
Make sure that you pull out the power plug from the
outlet before cleaning or replacing the filter.
0
Before turning this unit upside down and placing it on
the floor or a table, make sure that you lay a soft rag
in advance to prevent the projector from being
scratched.
Check that the left
and right tabs are
locked onto the unit
Remove the inner filter
1
.
If the filter is damaged or too dirty to be
cleaned
Pull out while
pushing down the
tab
.
Clean the filter
2
0
Replace with a new filter. A dirty filter will dirty the
internal parts of the unit and cause shadows to appear
on the video image.
0
To purchase a new filter or when there is dirt in the
internal parts of the unit, consult your authorized
dealer or nearby service center.
0
Inner filter (exchangeable filter)
Product no.: F1K-0019-00
Maintenance
.
0
Wash the filter with water and dry it in a shaded
area.
0
If the filter is extremely dirty, clean it with a
neutral detergent. Put on rubber gloves when
using a neutral detergent.
0
After washing the filter with water, make sure
that it is completely dry before reinstalling.
Otherwise, electric shock or malfunction may
occur.
0
Do not clean the filter with a vacuum cleaner or
air duster. The filter is soft and may be easily
damaged.
63
Troubleshooting
Before sending the unit to your authorized dealer for repair, please check the following points.
The following symptoms are not malfunctions.
You do not need to worry about the following symptoms if there is no abnormality on the screen.
0 A part of the top or front surface of the unit is hot.
0 A creaking sound is heard from the unit.
0 An operating sound is heard from the inside of the unit.
0 Color smear occurs on some screens.
This unit is a digital device. This unit may become unable to operate normally due to external static or noise.
Perform the following operations when such malfunctions occur.
A If the unit is in the Standby mode, pull out the power plug, followed by inserting it again
B Press the A [STANDBY/ON] button on the main unit to turn on the power again
When “High Altitude Mode” is set to “On”, and “Lamp Power” is set to “High” during 3D mode, the fan will
make louder noise than usual since it is designed to run at high speed in 3D mode.
Power is not supplied
Check
Action
Refer to
Is the power cord disconnected?
Insert the power cord (plug) firmly.
Is the lamp cover properly shut?
If the unit is in the Standby mode, remove the power plug P. 61
and close the lamp cover properly. After that, insert the plug
again.
P. 20
Is the lamp in the Cool-down mode?
After exiting the Cool-down mode, turn on the power again. P. 22
Power shuts down automatically
Check
Action
Refer to
Has “ECO Mode” been configured?
Set “ECO Mode” to “Off”.
P. 58
Has “Off Timer” been configured?
Set “Off Timer” to “Off”.
P. 57
Are the air inlets and exhaust vent
blocked?
Leave proper clearance when installing the unit.
P. 10, 11
P. 15
Is the filter dirty?
Clean the filter.
P. 63
Troubleshooting
64
Video image does not appear
Check
Action
Refer to
Is the correct external input selected?
Select the correct external input terminal.
P. 21
Is the power of the AV device or PC
turned on?
Turn on the power of the AV device or PC and play the
video.
P. 18
Is the AV device or PC properly
connected?
Connect the AV device or PC properly.
P. 18
Are the correct signals being output from Set the AV device or PC properly.
the AV device or PC?
P. 18
Is the cable in use an HDMI-certified
cable?
P. 18
Use an HDMI-certified high-speed cable. Also, use as
short a cable as possible.
Is an intermediate device (AV amplifier, Change the sequence of turning on the source device,
P. 18
divider, etc.) in use?
intermediate device and the projector. And after turning on
each device, ensure that the signal output is stable before
turning on the next device.
Is an old source device in use?
P. 50
Change the resolution setting of the source device. For
details on how to change the setting, please refer to the
instruction manual of the source device. Or, try connecting
to the HDMI2 terminal and set “HDMI2 EDID” to “B”.
3D images do not appear
Check
Action
Refer to
P. 29
Do you see two images displayed side by Set “3D Format” to “Side by Side”
side?
Video images in the “Side by Side” format may not be
recognized automatically in the case of 3D video images.
Is an intermediate device (AV amplifier, Connect the source device to the projector directly, and P. 18
divider, etc.) in use?
check whether there is any improvement in the condition.
If the condition improves, it is likely that this is not caused
by malfunction of the projector.
Is the cable in use an HDMI-certified
cable?
Use an HDMI-certified high-speed cable.
Also, use as short a cable as possible.
Is the power of the 3D Glasses turned
on?
If you are using the PK-AG2 or PK-AG3 3D Glasses, turn Check the
instruction
on the power manually.
manual of the 3D
Check whether the PK-AG1 battery of the 3D Glasses has Glasses and 3D
run out, and whether PK-AG2 and PK-AG3 are charged. Synchro Emitter.
Position them at an appropriate distance.
Are the 3D Glasses charged?
Are the 3D Glasses and 3D Synchro
Emitter too far away from each other?
Check the model name of 3D Glasses and 3D Synchro
Emitter, and use the correct combination.
P. 9
Troubleshooting
Is the 3D Glasses and 3D Synchro
Emitter combination correct?
P. 18
3D video image looks unnatural
Check
Are there overlapping video images?
Action
Refer to
If there are overlapping video images partially, this is due P. 29
to the crosstalk phenomenon.
In this case, adjust “Crosstalk Cancel” accordingly.
If there are overlapping video images partially, this is due P. 46
to the crosstalk phenomenon.
This phenomenon often occurs when there are drastic
changes in the brightness.
In this case, set Lamp Power to “High”
65
Video image looks unnatural
Colors are unnatural
Check
Action
Refer to
Is the color space of the input signal
correctly set?
The color may turn out unnatural when the input signal is P. 49
different from that in the projector setting.
Set the “Color Space” for “Input Signal” correctly.
Is the image correctly adjusted?
Adjust “Color” and “Tint” accordingly.
P. 49
Is the AV device or PC properly
connected?
Connect the AV device or PC properly.
P. 18
* The video image may appear slightly reddish immediately after starting up. This is not a malfunction.
Video image is fuzzy
Check
Is the focus correctly adjusted?
Action
Adjust the focus.
Refer to
P. 23
Is the unit placed too near or too far away Set the unit at a correct distance from the screen.
from the screen?
P. 74
Video image flickers
Check
Do you see horizontally-extended,
overlapping video images?
Action
In this case, set “3D Format” to “Auto”
Refer to
P. 29
Are you viewing the video images under This is caused by interference between the 3D glasses with
a fluorescent light?
the flickers of the fluorescent light.
View with the fluorescent light turned off.
Is “Lens Aperture” set to “Auto 1” or “Auto Set “Lens Aperture” to “Manual”
2”?
—
P. 43
* Flickers may sometimes occur upon starting up the projector unit, or immediately after the projector is changed from
floor-standing to ceiling mounted. This is attributable to the lamp or drive mechanism, and is likely not caused by
malfunction of the projector.
Projected image is dark
Check
Action
Refer to
Troubleshooting
Is the lamp near exhaustion?
Check the lamp time in the “Information” menu. Prepare a P. 59
new lamp unit or replace as soon as possible when the
P. 60
lamp is near exhaustion.
Is the aperture closed?
Set “Lens Aperture” to “Auto 1” or “Auto 2”, or set to
“Manual” and open up the aperture manually.
P. 43
Is “Lamp Power” set to “Low”?
Set “Lamp Power” to “High”
P. 46
Video image appears horizontally (vertically) extended
Check
Action
Refer to
Is “3D Format” set to “Side by Side”?
Set “3D Format” to “Auto”
P. 29
Is “Anamorphic” set to a setting other
than “Off”?
Set “Anamorphic” to “Off”
P. 53
66
Striped patterns appear on the screen
Check
Does the fabric of the screen have a
regular pattern?
Action
Refer to
Interference fringes may sometimes occur between the
fabric pattern and the pixels. Please consult the authorized
dealer.
—
Action
Refer to
Video images are missing
Check
Has screen mask been configured?
Set “Mask” to “Off”.
P. 50
Is the display position misaligned?
Alter the “Picture Position” value so that the entire image P. 50
appears on the screen.
Remote control does not work
Check
Action
Refer to
Are the batteries correctly loaded?
Match the polarities (t s) correctly when loading the
batteries.
P. 14
Are the batteries exhausted?
Replace with new batteries.
P. 14
Is there an obstructing object between Remove any obstructing object.
the remote control and remote sensor?
P. 14
Is the remote control held too far away
from the unit?
P. 14
Hold the remote control closer to the sensor during use.
Are the IR (infrared) 3D Glasses and 3D As there is a possibility of signal interference, when you are P. 28
Synchro Emitter in use?
using the IR (infrared) 3D Glasses together with the 3D
Synchro Emitter, try adjusting the orientation of the 3D
Synchro Emitter.
The lens cover does not close P Q
Check
Is “Lens Cover” set to “Open”?
Action
Refer to
Set “Lens Cover” under “Lens Control” in the setting menu P. 51
to “Auto”.
Noise is heard
Check
Action
Refer to
Check the installation condition of the projector.
P. 15
When the surrounding temperature of the projector is high,
the fan revolution speed increases to protect the projector
unit, hence a louder operating sound.
Are you viewing 3D video images?
“Lamp Power” is set automatically to “High” to ease viewing P. 46
of 3D video images, hence a louder fan operating sound.
If you are bothered by the sound, set it to “Low”.
Is the “Picture Mode” or “Color Profile”
changed?
P Q only
Operating sound is generated by the cinema filter. This is
not a malfunction.
—
Did you change the “4K e-shift” setting
for “MPC Level”?
Switching sound is generated. This is not a malfunction.
—
Troubleshooting
Is the exhaust vent blocked?
Is the unit used near a heater or airconditioner?
There are small black or colored dots on the screen
The D-ILA device is manufactured using high-precision technologies, but there may be some (less than 0.01%) missing
pixels or pixels that remain permanently lit. This is not a malfunction.
67
When the Following Messages Appear...
Message
Description
0
No device is connected to the input
terminal.
0
The input terminal is connected but
there is no signal.
No Input
.
Lamp replacement
Back
BACK
Troubleshooting
68
Input the video signals.
A video signal that cannot be used with Input video signals that can be used.
this unit has been input (The names of (P. 76)
input terminals such as “HDMI-1” and
“HDMI-2” will be displayed in yellow).
HDMI-1
.
.
Action
Get ready a new lamp unit and replace
Indicates that the lamp needs to be
as soon as possible. Reset the lamp time
replaced soon.
To clear the message, press the [BACK] after replacing the lamp. (P. 60, 62)
button on the operation panel of the
projector unit or the remote control.
External Control
It is possible to control this unit by connecting it to a PC using an RS-232C cross cable (D-sub 9-pin).
The projector can be controlled by connecting it to a PC through the computer network with a LAN cable for control
commands to be sent to the projector.
Æ “ Network ” (P. 58)
Please use it after you have gained proper understanding from professional books or consulting the system
administrator.
0
RS-232C Specifications
This Unit
Pin No.
1
5
6
0
9
Signal
Function
Signal Direction
2
RxD
Receive data
PC " This unit
3
TxD
Transmission data
This unit " PC
5
GND
Signal ground
—
1, 4, 6 - 9
N/C
—
—
PC refers to the controller, such as a personal computer.
Mode
D0 D1 D2 D3 D4 D5 D6 D7
Start bit
Stop bit
Non-synchronous
Character length
8 bit
Parity
None
Start bit
1
Stop bit
1
Data rate
19200 bps
Data format
Binary
TCP/IP Connection
Before controlling via LAN, it is necessary to establish connection of the TCP layer by a “3-way handshake”, followed
by sending out “PJREQ” and receiving “PJACK” within five seconds after the projector sends out “PJ_OK” for connection
authentication.
If you are unable to complete sending within five seconds, or when “PJ_NG” or “PJNAK” is received, check the operating
status of the projector, followed by performing the steps again starting from establishment of a TCP connection.
Within 5 Seconds
Projector
PJ_OK
PJACK
Establishment of TCP Connection
TCP Port No. 20554
3-way Handshake
Projector Control
PJREQ
Controlling PC
Connection Authentication Procedure
Others
.
69
Command Format
The command between this unit and the computer consists of “Header”, “Unit ID”, “Command”, “Data” and “End”.
0
Header (1 byte), Unit ID (2 bytes), Command (2 bytes), Data (n bytes), End (1 byte)
Header
This binary code indicates the start of communication.
Binary Code
Type
Description
21
Operating command
PC " This unit
3F
Reference command PC " This unit
40
Response command
This unit " PC
06
ACK
This unit " PC (returns to PC after the command is accepted without
error)
Unit ID
This is a code that specifies the unit. The binary code is fixed at “8901”.
Command and data
Operating command and data (binary code)
Command
Type
Description
0000
Connection Check whether communication is
check
enabled between this unit and the
PC during standby.
5057
Power
supply
During standby
31: Turns on the power
When power is on
30: Turns off the power (Standby
mode)
4950
Input
When power is on
36: HDMI 1
37: HDMI 2
5243
Remote
control
Sends the same code as the
supplied remote control.
0
Reference command and data (binary code)
Command
Type
5057
Power
supply
During standby or when power is
on
30: Standby mode
31: When power is on
32: In the Cool-down mode
34: When error occurs on this unit
4950
Input
When power is on
36: HDMI 1
37: HDMI 2
“Remote Control
Code”P. 71
End
This code indicates the end of communication. The binary code is fixed at “0A”.
Others
70
Description
Remote Control Code
Binary code is sent during communication.
0
The following applies to the case when the remote control code is “A”. In the case of “B”, add “36” to the beginning
of the code.
Remote Control Button Name
Binary Code
Remote Control Button Name
Binary Code
STAND BY
37 33 30 36
OK
37 33 32 46
ON
37 33 30 35
MENU
37 33 32 45
HDMI 1
37 33 37 30
BACK
37 33 30 33
HDMI 2
37 33 37 31
NATURAL
37 33 36 41
INFO.
37 33 37 34
CINEMA
37 33 36 38
MODE 1
37 33 44 38
PICTURE MODE
37 33 46 34
MODE 2
37 33 44 39
COLOR PROFILE
37 33 38 38
MODE 3
37 33 44 41
GAMMA SETTINGS
37 33 46 35
LENS CONTROL
37 33 33 30
MPC
37 33 46 30
LENS AP.
37 33 32 30
C.M.D.
37 33 38 41
ANAMO.
37 33 43 35
ADVANCED MENU
37 33 37 33
HIDE
37 33 31 44
GAMMA
37 33 37 35
J
37 33 30 31
COLOR TEMP.
37 33 37 36
K
37 33 30 32
3D FORMAT
37 33 44 36
I
37 33 33 34
PIC. ADJ.
37 33 37 32
H
37 33 33 36
Others
71
Communications Example
This section shows the communication examples of RS-232C.
Operating command
Type
Command
Description
Connection check
PC " This unit: 21 89 01 00 00 0A
This unit " PC: 06 89 01 00 00 0A
Connection check
Power (On)
PC " This unit: 21 89 01 50 57 31 0A
This unit " PC: 06 89 01 50 57 0A
When power is turned on from the
Standby mode
Power (Off)
PC " This unit: 21 89 01 50 57 30 0A
This unit " PC: 06 89 01 50 57 0A
When power is turned off (Standby
mode) from power-on mode
Remote control
(MENU)
PC " This unit: 21 89 01 52 43 37 33 32 45 0A
This unit " PC: 06 89 01 52 43 0A
When the same operation as
pressing the [MENU] button on the
remote control is performed
Reference command
Type
Command
Description
Power (On)
PC " This unit: 3F 89 01 50 57 0A
This unit " PC: 06 89 01 50 57 0A
This unit " PC: 40 89 01 50 57 31 0A
When information on the power-on
state is acquired
Input (HDMI 1)
PC " This unit: 3F 89 01 49 50 0A
This unit " PC: 06 89 01 49 50 0A
This unit " PC: 40 89 01 49 50 36 0A
When information on HDMI 1 input
is acquired
Others
72
Specifications
Product Name
D-ILA Projector
Model Name
DLA-RS640, DLA-RS540, DLA-RS440
Display Panel/Size
D-ILA device *1, 2
0.7" (1920 x 1080 pixels) x 3 (total no. of pixels: approx. 6.22 million)
Projection Lens
2.0 x power zoom lens (1.4:1 to 2.8:1), motorized zoom and focus
Light-source Lamp
265 W ultra-high pressure mercury lamp [product no.: PK-L2615U]
Average lifespan: 4500 hours (“Low” mode)
Screen Size
Approx. 60" to 200" (Aspect ratio of 16:9)
Brightness
2000 lm P
1900 lm Q
1800 lm R
Projection Distance
Refer to P. 74.
Input Compatibility Signal
Refer to P. 76.
Display Resolution
3840 x 2160 pixels *3
Input Terminal
Dual, HDMI 19-pin x 2 (HDCP 2.2-compatible) *4
HDMI Input
Output Terminal Trigger Terminal
3D synchro
Control Terminal RS-232C Terminal
LAN Terminal
1 system, Ø 3.5 mm DC Power Jack (E)
DC OUT 12 V, 0.1 A
Dedicated terminal for 3D Synchro Emitter (1 system, mini-DIN 3-pin)
1 system, D-sub 9-pin (male) (external control)
1 system, RJ-45 plug
Power Requirements
AC 100 V to 240 V, 50 Hz/60 Hz
Power Consumption
380 W (during networked standby: 1.5 W *5, during standby: 0.4 W *6)
Operation Environment
Temperature: 5°C to 35°C; humidity: 20% to 80%; storage
temperature: -10°C to 60°C
Installation Height
Below 5,000 ft (1524 m)
Dimensions (Width x Height x Depth)
Approx. 455 mm x 179 mm x 472 mm (excluding feet and protrusions)
Mass
15.6 kg (P Q)
15.4 kg (R)
Accessories
Refer to P. 9.
*1
*2
D-ILA is the abbreviation for Direct drive Image Light Amplifier.
D-ILA devices are manufactured using extremely high-precision technology with a pixel effectiveness of 99.99%.
Only 0.01% or less of the pixels are either missing or would remain permanently lit.
*3 During 3D playback, the pixel is set to 1920 x 1080.
*4 HDCP is the abbreviation for High-bandwidth Digital Content Protection system. The image of the HDMI input
terminal may not be displayed in some cases due to changes in the HDCP specifications.
*5 The power consumption of this product during networked standby when all wired network ports are connected
is 1.5 W.
*6 “During standby” refers to Eco Mode standby (P. 58).
0 Design and specifications are subject to change without prior notice.
0 Please note that some of the pictures and illustrations may have been abridged, enlarged or contextualized in order
to aid comprehension. Images may differ from the actual product.
Others
73
P Q have obtained the “THX 3D Display Certification” by THX.
In addition to 2D movies, you can also enjoy faithful reproduction of images in a “quality as
intended by the filmmaker” during playback of 3D movies.
The THX 3D certification is “an indication of high definition and high resolution”, which is
granted to products that have cleared more than 400 image quality tests.
®
P Q are isf-certified, so calibration can be performed by an isf-certified trainer.
After calibration is performed, an isf mode is added to the Picture mode.
For more details, please refer to the isf website.
http://www.imagingscience.com/
About Trademarks and Copyrights
HDMI, HDMI logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LCC.
“x.v.Color” and the “x.v.Color” logo are trademarks of Sony Corporation
Screen Size and Projection Distance
When a 16:9 screen is used
Screen Size
Projection Distance
Diagonal (Model)
Width (mm)
Height (mm)
Wide-end (m)
Tele-end (m)
60
1328
747
1.78
3.66
70
1549
872
2.09
4.28
80
1771
996
2.4
4.89
90
1992
1121
2.7
5.51
100
2214
1245
3.01
6.13
110
2435
1370
3.31
6.75
120
2656
1494
3.62
7.36
130
2878
1619
3.92
7.98
140
3099
1743
4.23
8.60
150
3320
1868
4.53
9.22
160
3542
1992
4.84
9.84
170
3763
2117
5.14
10.45
180
3984
2241
5.45
11.07
190
4206
2366
5.75
11.68
200
4427
2490
6.06
12.30
Others
74
When a 4:3 screen is used
Screen Size
Projection Distance
Diagonal (Model)
Width (mm)
Height (mm)
Wide-end (m)
Tele-end (m)
60
1219
914
2.22
4.49
70
1422
1067
2.60
5.24
80
1626
1219
2.98
6.00
90
1829
1372
3.36
6.75
100
2032
1524
3.74
7.51
110
2235
1676
4.11
8.26
120
2438
1829
4.49
9.02
130
2642
1981
4.87
9.77
140
2845
2134
5.25
10.53
150
3048
2286
5.63
11.28
160
3251
2438
6.00
12.04
* Projection to a 4:3 screen larger than 163" is equivalent to a size that is larger than 200" in the 16:9 format, and is
beyond our guarantee coverage.
When a 2.35:1 screen is used
Screen Size
Projection Distance
Diagonal (Model)
Width (mm)
Height (mm)
Wide-end (m)
Tele-end (m)
60
1402
597
1.95
3.91
70
1636
696
2.28
4.56
80
1870
796
2.60
5.21
90
2103
895
2.93
5.86
100
2337
995
3.26
6.51
110
2571
1094
3.58
7.16
120
2805
1193
3.91
7.81
130
3038
1293
4.23
8.47
140
3272
1392
4.56
9.12
150
3506
1492
4.88
9.77
160
3740
1591
5.21
10.42
170
3973
1691
5.53
11.07
180
4207
1790
5.86
11.72
190
4441
1890
6.19
12.37
200
4674
1989
6.51
13.02
Others
75
Types of Possible Input Signals
Video
Digital Video Signal
480p, 576p, 720p/50 Hz, 720p/60 Hz, 1080i/50 Hz, 1080i/60 Hz, 1080p/24
Hz, 1080p/50 Hz, 1080p/60 Hz, 3840×2160/24Hz, 3840×2160/25Hz,
3840×2160/30Hz, 3840×2160/50Hz*1, 3840×2160/60Hz*1,
4096×2160/24Hz*2, 4096×2160/25Hz*2, 4096×2160/30Hz*2,
4096×2160/50Hz*1, 2, 4096×2160/60Hz*1, 2
3D Signal
Frame Packing
720p/50 Hz, 720p/60 Hz, 1080p/24 Hz
Side-by-side
1080i/60 Hz, 1080p/60 Hz, 1080i/50 Hz, 1080p/50 Hz, 1080p/24 Hz,
720p/50 Hz, 720p/60 Hz
Top-and-bottom
720p/50 Hz, 720p/60 Hz, 1080p/24 Hz
*1
When the color space is RGB/YCbCr(4:4:4), only 8-bit input is supported.
*2
The display image when the input signal is 4096×2160
4096
2160
3840
Display Area
.
PC signal (HDMI)
No.
Designation
Resolution
fh [kHz]
fv [Hz]
dot CLK
[MHz]
Total No.
of Dots
[dot]
Total No.
No. of
of Lines Effective
[line]
Dots [dot]
No. of
Effective
Lines
[line]
1
VGA 60
640×480
31.500
60.000
25.200
800
525
640
480
2
VGA 59.94
640×480
31.469
59.940
25.175
800
525
640
480
3
SVGA 60
800×600
37.879
60.317
40.000
1,056
628
800
600
4
XGA 60
1024×768
48.363
60.004
65.000
1,344
806
1,024
768
5
WXGA 60
1280×768
47.760
60.000
79.998
1,675
796
1,280
768
6
WXGA+ 60
1440×900
55.919
59.999
106.470
1,904
932
1,440
900
7
SXGA 60
1280×1024
63.981
60.020
108.000
1.688
1,066
1,280
1,024
8
WSXGA+ 60 1680×1050
65.222
60.002
147.140
2,256
1,087
1,680
1,050
Others
* Even when signals can be input, video images may not be projected properly depending on the PC or cable in use.
When this occurs, switching to another compatible resolution or changing the cable may help to resolve the problem
in some cases.
76
Indicator Display on the Main Unit
Meaning of the lighting figures
STANDBY/ON
The indicator lights up.
LAMP
WARNING
The indicator appears blinking.
.
Operation mode display
Displays using the different colors and solid/blinking light of the “STANDBY/ON” indicator.
“STANDBY/ON” lights up (red)
In standby state
STANDBY/ON
TANDBY
ND
LAMP
WARNING
“STANDBY/ON” blinking (red)
In the Cool-down mode
STANDBY/ON
TANDBY
LAMP
WARNING
“STANDBY/ON” lights up (green)
During lamp startup
STANDBY/ON
TANDBY
ND
LAMP
WARNING
All lights off
During projection
STANDBY/ON
LAMP
WARNING
“STANDBY/ON” blinking (green)
When the video image is temporarily hidden (HIDE is on)
STANDBY/ON
TANDBY
LAMP
WARNING
.
Estimated timing for lamp replacement
Displays using the solid/blinking light of the “LAMP” indicator. The “STANDBY/ON” indicator, which shows the operating
mode of the unit, is displayed simultaneously as described above.
“LAMP” lights up (orange)
STANDBY/ON
LAMP
AM
WARNING
When lamp replacement is
near
.
Others
77
Warning display
You can tell the details of a warning from the (repeated) displays of the “WARNING” and “LAMP” indicators. The
“STANDBY/ON” indicator, which shows the operating mode of the unit, is displayed simultaneously as described above.
The Warning mode is activated once the message is displayed. Projection is interrupted, and the cooling fan is turned
on for about 100 seconds.
The power cannot be turned on again while cooling is in progress. Check the following after cooling is complete.
Indicator Status (Solid/Blinking)
STANDBY/ON
Mode
Display
.
STANDBY/ON
Mode
Display
.
STANDBY/ON
.
Mode
Display
LAMP
(*)
LAMP
WARNING
Blinking
Frequency
x1
Abnormality in the power supply
x2
Cooling fan stopped abnormally
x3
Internal temperature is abnormally
high
x4
External temperature is too high
x5
Abnormal circuit operation
x1
Abnormal circuit operation
(Red)
WARNING
(Orange) (Red)
Blinking
Simultaneously
LAMP
WARNING
RN
(Orange)
(Red)
Description
Check and Countermeasure
0
Check that nothing is blocking
the air inlets.
0
Check that the external
temperature is normal.
Countermeasure: Leave the unit
unoperated until it cools down.
After that, turn on the power again.
x2
x3
x4
Abnormal operation of the lens
cover
0
Check that nothing is blocking
the lens cover.
Countermeasure: Turn on the
power again.
x1
Lamp does not light up and unit is
unable to project
x2
Lamp goes out during projection
x3
0
Check that the lamp unit and
lamp cover are correctly
installed.
Countermeasure: Turn on the
When the lamp cover is removed power again.
If the Warning mode is activated again, wait for the cooling fan to stop, followed by pulling out the power plug from the
outlet.
Request for repair at your authorized dealer or a nearby service center.
(*) If the scheduled time for lamp replacement is exceeded, the indicator may light up.
Others
78
Dimensions
(Unit: mm)
Bottom Surface
91
472
290
Top Surface
5
59
455
Lens
.
337
Lens
.
Rear Surface
Front
Lens Center
110
178.5
32
Ø60
24
103.5
227.5
Lamp Cover
110
92
.
.
0
The dimensions are identical for all the models.
Others
79
Index
A Accessories ........................................................... 9
Adjusting Distortion of the Projection Screen ....... 23
Adjustment and Setting by the Menu ................... 44
Adjustment of the Image Quality .......................... 46
ADVANCED MENU ............................................. 13
Anamorphic ......................................................... 53
Aspect ................................................................. 27
B Back Color ........................................................... 57
Brightness ............................................................ 48
C Ceiling Mount ....................................................... 16
Cleaning and Replacing the Filter ........................ 63
Clear Black .......................................................... 46
Clear Motion Drive ............................................... 41
Clear Motion Drive ............................................... 41
Color Density ....................................................... 49
Color Management .............................................. 33
COLOR P.FILE .................................................... 31
Color Profile ......................................................... 31
Color Shade ......................................................... 49
Color Space ......................................................... 49
Color Temperature ............................................... 47
Connection .......................................................... 18
Contrast ............................................................... 48
Controls and Features ......................................... 10
Custom Gamma ................................................... 37
D Dimensions .......................................................... 79
Display Position ................................................... 50
E Eco Mode ............................................................ 58
External Control ................................................... 69
F Filter Product no. ................................................. 63
Filter Replacement ............................................... 63
Focus ................................................................... 24
Frame Interpolation .............................................. 41
Frame Packing ..................................................... 29
G GAMMA ............................................................... 36
Gamma Adjustment ............................................. 36
Others
H HDMI Color Space ............................................... 49
HDMI Input Level ................................................. 49
HDMI Input Terminal ............................................ 18
HIDE .................................................................... 21
High Altitude Mode .............................................. 53
I
80
Indicator Display .................................................. 77
INFO .................................................................... 13
Input Resolution ............................................. 59, 76
Input Signal .................................................... 59, 76
Input terminals ..................................................... 12
Installation Method .............................................. 15
Installing the 3D Syncro Emitter ........................... 28
K Keystone Correction ............................................ 53
L Lamp ..................................................................... 9
Lamp Power ......................................................... 46
Lamp Time ........................................................... 59
Language Selection ............................................. 57
Lens ..................................................................... 10
LENS AP. ............................................................. 13
Lens Aperture ................................................ 43, 46
Lens Control ........................................................ 23
Lens cover ........................................................... 10
Lens Cover ............................................................ 9
Lens Memory ....................................................... 23
Lens Shift ............................................................. 23
Line Display ......................................................... 57
Logo Display ........................................................ 57
M Menu Items .......................................................... 44
Menu Position ...................................................... 57
MPC LEVEL ......................................................... 35
N Network ............................................................... 58
NR ....................................................................... 48
O Off Timer .............................................................. 57
Optional Accessories ............................................. 9
P PIC. ADJ. ............................................................. 48
Picture Mode ....................................................... 30
Picture Tone ........................................................ 47
Pixel Adjustment .................................................. 52
Precautions during Installation ............................. 15
Progressive .......................................................... 50
Projection Distance .............................................. 74
R Remote Control ................................................... 13
Replacing the Lamp ............................................. 60
Resetting the Lamp .............................................. 59
RGB ..................................................................... 49
RS-232C .............................................................. 19
S Screen Correction ................................................ 26
Screen Mask ........................................................ 50
Screen Size and Projection Distance ................... 74
Shadow/Highlight Correction ............................... 38
Shift ..................................................................... 24
Side by Side ........................................................ 29
Signal Display ...................................................... 59
Software Ver. ....................................................... 59
Specifications ...................................................... 73
T THX .....................................................................
Top and Bottom ...................................................
Trigger .................................................................
Troubleshooting ...................................................
74
29
57
64
U User Name Edit ................................................... 46
W When the following messages appear... .............. 68
Z Zoom ................................................................... 24
Symbol
3D Crosstalk Cancel ............................................ 29
3D Format ............................................................ 29
3D Glasses ...................................................... 9, 28
3D Setting ............................................................ 50
3D Synchro Emitter .......................................... 9, 28
V Viewing 3D Movies .............................................. 28
Viewing Videos .................................................... 21
Others
81
.
Others
82
.
Others
83
© 2017 JVCKENWOOD Corporation
DLA-RS640
DLA-RS540
DLA-RS440
D-ILA PROJECTOR
.
0917KSY-SW-XX
Download PDF
Similar pages