Cisco Aironet 3800 Series Access Points Data Sheet

Data Sheet
Cisco Aironet 3800 Series Access Points
The Cisco® Aironet® 3800 Series Wi-Fi access points are highly versatile and deliver
the most functionality of any access points in the industry.
Product Overview
For organizations paving the way for the new 802.11ac Wave 2 standard, the Cisco Aironet 3800 Series is the
perfect solution. The access points go beyond getting ready for the new standard, providing the ultimate in
flexibility and versatility.
For large enterprise organizations that rely on Wi-Fi to engage with customers, the 3800 Series is a hands-off
product that’s intelligent enough to make decisions based on end-device activities and usage. This automation
allows you to devote time to other pressing matters, secure in the knowledge that your Wi-Fi network is performing
to its utmost potential.
The Aironet 3800 Series is packed with the features and capabilities that have made Cisco the industry leader, at a
price point that is ideal for managing wireless growth, capacity, and coverage gaps in dense indoor environments.
Features and Benefits
Feature
Benefit
802.11ac Wave 2 support
Provides a theoretical connection rate of up to 2.6 Gbps per radio—roughly double the rates offered by today’s highend 802.11ac access points.
High-density experience
Best-in-class RF architecture that provides high-performance coverage for a high density of client devices, giving
the end user a seamless wireless experience. Features include custom hardware in 802.11ac Wave 2 radios, Cisco
CleanAir®, Cisco ClientLink 4.0, cross-access point noise reduction, and an optimized client roaming experience.
Multiuser multiple-input
multiple-output (MUMIMO) technology
Supporting three spatial streams, MU-MIMO enables access points to split spatial streams between client devices,
to maximize throughput.
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 12
Feature
Benefit
Multigigabit Ethernet
support
Providing multiple gigabit uplink speeds of 2.5 Gbps and 5 Gbps in addition to 100-Mbps and 1-Gbps speeds. All
speeds are supported on Category 5e cabling for an industry first, as well as 10GBASE-T cabling.
Flexible Radio
Assignment
Allows the access points to intelligently determine the operating mode of serving radios based on the RF
environment. The access points can operate in the following modes:
● 2.4-GHz and 5-GHz mode: One radio serves clients in 2.4-GHz mode, while the other serves clients in 5-GHz
mode.
● Dual 5-GHz mode: Both radios inside the access point operate on the 5-GHz band, maximizing the benefits of
802.11ac Wave 2 and increasing client device capacity.
● Wireless Security Monitoring and 5-GHz mode: One radio serves 5-GHz clients while the other is scanning
the full spectrum for attackers, RF interference, and rogue devices.
Dual 5-GHz radio support
Enables both radios to operate in 5-GHz client serving mode, allowing an industry-leading 5.2 Gbps (2 x 2.6 Gbps)
over-the-air speed while increasing client capacity.
Smart antenna connector
An intelligent second physical antenna connector is included on 3800 Series models with an external antenna. This
connector provides advanced network design flexibility for high-density and large open-area environments such as
auditoriums, convention centers, libraries, cafeteria, and arenas/stadiums, allowing two sets of antennas to be
connected and active on a single access point.
Modular architecture
Second-generation modular architecture first introduced by the 3600 Series access points. New side-mount
connection allows companies to add and remove modules as needed without having to dismount the access point
from the ceiling, further simplifying the customer’s time and dollars when performing network upgrades.
The new side-mount architecture allows for additional flexibility in the form factor of a 3800 Series module, and in
the choice of solutions with integrated or even external antennas of their own.
We have doubled the amount of power available to 3800 Series modules from 9W to 18W, broadening the potential
module applications and solutions.
160-MHz channel support
Supporting channels up to 160 MHz wide, Dynamic Bandwidth Selection allows the access point to dynamically
switch between 20-, 40-, 80-, and 160-MHz channels, depending on the RF channel conditions, providing the
industry’s best-performing wireless network.
Zero-impact Application
Visibility and Control*
Uses dedicated hardware acceleration to improve the performance of line-speed applications such as Cisco
Application Visibility and Control.
Cisco ClientLink 4.0
Cisco ClientLink 4.0 technology improves downlink performance to all mobile devices, including one-, two-, and
three-spatial-stream devices on 802.11a/b/g/n/ac while improving battery life on mobile devices such as
smartphones and tablets.
Cisco CleanAir 160 MHz*
Cisco CleanAir technology, enhanced with 160-MHz channel support, provides proactive, high-speed spectrum
intelligence across 20-, 40-, 80-, and 160-MHz-wide channels to combat performance problems due to wireless
interference.
Cross-access point noise
reduction
A Cisco innovation that enables access points to intelligently collaborate in real time about RF conditions so that
users connect with optimized signal quality and performance.
Optimized access point
roaming
Helps ensure that client devices associate with the access point in their coverage range that offers the fastest data
rate available.
Automatic link
aggregation (LAG)
support
802.3ad (Link Aggregation Control Protocol [LACP]) compliant, allowing both Ethernet interfaces to automatically
enable LAG, increasing overall throughput to the access point.
Cisco Mobility Express
Flexible deployment mode through the Cisco Mobility Express solution is ideal for high density environments and
can support up to 100 access points. Easy setup allows the 3800 Series access points to be deployed on networks
without a physical controller.
802.11ac Wave 2 and Beyond
The Aironet 3800 Series extends 802.11ac speed and features to a new generation of smartphones, tablets, and
high-performance laptops, providing a greater end-user experience. Whether your project involves wholesale
changes to your current wireless network or upgrading your legacy Wi-Fi deployments (802.11a/b/g/n/ac Wave 1
deployments), the Aironet 3800 Series can handle the job.
The Aironet 3800 Series supports 802.11ac Wave 2, providing a theoretical connection rate of up to 5.2 Gbps—
that’s roughly four times the rate offered by today’s high-end 802.11ac access points. The boost helps you stay
ahead of the performance and bandwidth expectations of today’s mobile worker, who usually uses multiple Wi-Fi
devices instead of just one. As such, users are adding proportionally larger traffic loads to the wireless LAN, which
has outpaced Ethernet as the default enterprise access network.
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 12
Cisco DNA Support
Pairing the 3800 Series access points with the Cisco Digital Network Architecture (DNA) allows for a total network
transformation. Cisco DNA allows you to truly understand your network with real-time analytics, quickly detect and
contain security threats, and easily provide networkwide consistency through automation and virtualization. By
decoupling network functions from the hardware, you can build and manage your entire wired and wireless network
from a single user interface.
Working together, the 3800 Series and DNA offer such features as:
●
Flexible Radio Assignment
●
Cisco Connected Mobile Experiences
●
Cisco High Density Experience
●
Apple FastLane
●
Cisco Identity Services Engine
●
And much more
The result? Your network stays relevant, becomes digital-ready, and is the lifeblood of your organization.
High-Density Experience
Building on the Cisco Aironet heritage of RF excellence, the Cisco Aironet 3800 Series Access Points run on a
purpose-built, innovative chipset with a best-in-class RF architecture. This chipset provides a high-density
experience for enterprise networks designed for mission-critical, high-performance applications. The 3800 Series is
part of Cisco’s flagship portfolio of 802.11ac-enabled access points, delivering a robust mobility experience. It
features 802.11ac Wave 2 with 4x4 MU-MIMO technology supporting three spatial streams. MU-MIMO enables
access points to split spatial streams between client devices, to maximize throughput.
With two radios built into each access point, the Aironet 3800 Series is more versatile than any access point
currently on the market. These radios are outfitted with Flexible Radio Assignment, which means that the access
points automatically self-optimize to better serve the environment. For example, one of the radios broadcasts its
signal on the 5-GHz channel and the other sends out a 2.4-GHz signal. The access point understands the wireless
environment and will automatically switch the 2.4-GHz signal to a 5-GHz signal, increasing the reliability of your
customers’ Wi-Fi use. This setting automatically works in reverse too: the access point can recognize that the RF
environment has changed and revert back to its original configuration.
The 3800 Series also dynamically changes the radio settings based on the wireless environment. The access point
will allow one of the radios to operate in Wireless- Security Monitoring mode, allowing you to detect wireless
security threats and interference and combat rogue access. This valuable information can be culled in an easy-tounderstand matrix to inform you about your wireless users. Flexible Radio Assignment also allows you to convert a
radio into Wireless Service Assurance mode, providing proactive health monitoring of the network.
●
Optimized access point roaming helps ensure that client devices associate with the access point in their
coverage range that offers the fastest data rate available.
●
Cisco ClientLink 4.0 improves downlink performance to all mobile devices, including one-, two-, and threespatial-stream devices on 802.11a/b/g/n/ac. At the same time, the technology improves battery life on
mobile devices.
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 3 of 12
●
Cisco CleanAir is technology enhanced with 160-MHz channel support. It delivers proactive, high-speed
spectrum intelligence across 20-, 40-, and 80-, and 160-MHz-wide channels to combat performance
problems due to wireless interference.
●
MIMO equalization capabilities optimize uplink performance and reliability by reducing the impact of signal
fade.
Modular Architecture
The 3800 Series carries forward the modular architecture first introduced with the Aironet 3600 Series, providing
unparalleled investment protection for forward-looking modular solutions. The 3800 Series delivers an enhanced
second-generation modular architecture by:
●
Moving the module connection from the bottom to the side of the access point. This allows for easier
addition and removal of a module without having to dismount the access point and also allows for flexibility
in module design with respect to size and appropriate antenna placement.
●
Increasing the power available to a module to 18W, providing additional flexibility for future module
solutions.
As wireless LAN continues to grow as the dominant method of connecting to private and public networks, the
access point becomes a perfect integration point into an enterprise corporate network or carrier service network for
a wide variety of solutions. Companies can use a single Ethernet cable drop from their wired network to provide
high-speed network access and also typically for Power over Ethernet (PoE) to the access point and solutions that
are integrated with and interconnected through the 3800 Series access points.
Product Specifications
Item
Specification
Part numbers
Cisco Aironet 3800i Access Point: Indoor environments, with internal antennas
● AIR-AP3802I-x-K9: Dual-band, controller-based 802.11a/b/g/n/ac
● AIR-AP3802I-xK910: Eco-pack (dual-band 802.11a/b/g/n/ac) 10 quantity access points
Cisco Aironet 3800i Access Point Configurable: Indoor environments, with internal antennas
● AIR-AP3802I-x-K9C: Dual-band, controller-based 802.11a/g/n/ac, configurable
● AIR-AP3802I-xK910C: Eco-pack (dual-band 802.11a/g/n/ac) 10 quantity access points, configurable
Cisco Aironet 3800e Access Point: Indoor, challenging environments, with external antennas
● AIR-AP3802e-x-K9: Dual-band controller-based 802.11a/b/g/n/ac
● AIR-AP3802e-xK910: Eco-pack (dual-band 802.11a/b/g/n/ac), 10 quantity access points
Cisco Aironet 3800e Access Point Configurable: Indoor, challenging environments, with external antennas
● AIR-AP3802E-x-K9C: Dual-band controller-based 802.11a/g/n/ac, configurable
● AIR-AP3802E-xK910C: Eco-pack (dual-band 802.11a/g/n/ac), 10 quantity access points, configurable
Cisco Aironet 3800p Access Point: Indoor, challenging environments, with external antennas
● AIR-AP3802p-x-K9: Dual-band controller-based 802.11a/b/g/n/ac
● AIR-AP3802p-xK910: Eco-pack (dual-band 802.11a/b/g/n/ac), 10 quantity access points
Cisco Aironet 3800p Access Point Configurable: Indoor, challenging environments, with external antennas
● AIR-AP3802p-x-K9C: Dual-band controller-based 802.11a/g/n/ac, configurable
● AIR-AP3802p-xK910C: Eco-pack (dual-band 802.11a/g/n/ac), 10 quantity access points, configurable
Cisco Smart Net Total Care™ for the Cisco Aironet 3800i Access Point with internal antennas
● CON-SNT-AIRPIBK9: SNTC-8X5XNBD 802.11ac Ctrlr AP 4x Duration: 12 Month(s)
Cisco Smart Net Total Care for the Cisco Aironet 3800e Access Point with external antennas
● CON-SNT-AIRPID38E: SNTC-8X5XNBD 802.11ac Ctrlr AP 4x4:3SS w/ CleanAir; Ex Duration: 12 Month(s)
Cisco Smart Net Total Care for the Cisco Aironet 3800p Access Point with external antennas
● CON-SNT-AIRAP382: SNTC-8X5XNBD 802.11ac Ctrlr AP 4x Duration: 12 Month(s)
Regulatory domains: (x = regulatory domain)
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 4 of 12
Item
Specification
Customers are responsible for verifying approval for use in their individual countries. To verify approval, and to identify
the regulatory domain that corresponds to a particular country, visit http://www.cisco.com/go/aironet/compliance.
Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global
Price List.
Cisco Smart Net Total Care Service: http://www.cisco.com/go/sntc
Cisco Wireless LAN Services
● AS-WLAN-CNSLT: Cisco Wireless LAN Network Planning and Design Service
● AS-WLAN-CNSLT: Cisco Wireless LAN 802.11n Migration Service
● AS-WLAN-CNSLT: Cisco Wireless LAN Performance and Security Assessment Service
Software and
supported wireless
LAN controllers
● Cisco Unified Wireless Network Software Release 8.2.MR1 or later
● Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services
Module 2 (WiSM2) for Catalyst® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex® 7500
Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco Virtual Wireless Controller
● Cisco IOS® XE Software Release 16.3 – Target Q3 CY2016
● Cisco Catalyst 3850 Series and 3650 Series Switches
802.11n version 2.0
(and related)
capabilities
● 4x4 MIMO with three spatial streams
● Maximal ratio combining (MRC)
● 802.11n and 802.11a/g beamforming
● 20- and 40-MHz channels
● PHY data rates up to 450 Mbps (40 MHz with 5 GHz).
● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
● 802.11 dynamic frequency selection (DFS)
● Cyclic shift diversity (CSD) support
802.11ac Wave 1
capabilities
● 4x4 MIMO with three spatial streams
● MRC
● 802.11ac beamforming
● 20-, 40-, and 80-MHz channels
● PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz)
● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
● 802.11 DFS
● CSD support
802.11ac Wave 2
capabilities
● 4x4 MU-MIMO with three spatial streams
● MRC
● 802.11ac beamforming
● 20-, 40-, 80, 160-MHz channels
● PHY data rates up to 5.2 Gbps
● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
● 802.11 DFS
● CSD support
Integrated antenna
Flexible radio (either 2.4 GHz or 5 GHz)
● 2.4 GHz, gain 4 dBi, internal antenna, omnidirectional in azimuth
● 5 GHz, gain 6 dBi, internal directional antenna, elevation plane beamwidth 90°
Dedicated 5-GHz radio
● 5 GHz, gain 5 dBi, internal antenna, omnidirectional in azimuth
External antenna
(sold separately)
● 3802e Series access points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)
● 3802p Series access points are certified for use with antenna gains up to 13 dBi (2.4 GHz and 5 GHz) with the
AIR-ANT2513-P4M-N= antenna
● Cisco offers the industry's broadest selection of antennas, delivering optimal coverage for a variety of deployment
scenarios
Smart Antenna
Connector
● Available on the 3802e Series and 3802p Series access points only
● Requires the AIR-CAB002-DART-R= 2 ft smart antenna connector to RP-TNC connectors to connect a second
antenna to the access point
● Required when running the flexible radio as either a:
◦ Second 5-GHz serving radio
◦ Wireless Security Monitoring radio
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 5 of 12
Item
Interfaces
Specification
◦ 2 Ethernet ports
◦ 100/1000/2500/5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz
◦ CAT 5e cabling
◦ Higher-quality 10GBASE-T (CAT 6/6a) cabling
◦ 100/1000BASE-T autosensing (RJ-45 - AUX port)
◦ Management console port (RJ-45)
Indicators
● Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader
errors
Dimensions
(W x L x H)
● Access point (without mounting brackets): 3802I: 8.66 x 8.68 x 2.46 in. (22 x 22 x 6.25 cm), 3802E: 8.66 x 8.68 x
2.62 in. (22 x 22 x 6.7 cm), 3802P: 8.66 x 8.68 x 2.62 in. (22 x 22 x 6.7 cm)
Weight
● 4.6 lb (2.09 kg)
Input power
requirements
● 802.3at PoE+, Cisco Universal Power over Ethernet (Cisco UPOE®)
● 802.3at power injector (AIR-PWRINJ6=)
● 50W power supply (AIR-PWR-50=)
Power draw
● 30W at the PSE with all features enabled except for the USB 2.0 port
● 34W at the PSE with the USB 2.0 port enabled
Environmental
Cisco Aironet 3800i
● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
● Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
● Operating temperature: 32° to 104°F (0° to 40°C)
● Operating humidity: 10% to 90% percent (noncondensing)
● Operating altitude test: 40˚C, 9843 ft.
Cisco Aironet 3800e
● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
● Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
● Operating temperature: -4° to 122°F (-20° to 50°C)
● Operating humidity: 10% to 90% (noncondensing)
● Operating altitude test: 40˚C, 9843 ft.
Cisco Aironet 3800p
● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
● Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
● Operating temperature: -4° to 122°F (-20° to 50°C)
● Operating humidity: 10% to 90% (noncondensing)
Operating altitude test: 40˚C, 9843 ft.
System memory
● 1024 MB DRAM
● 256 MB flash
Available transmit
power settings
2.4 GHz
● 23 dBm (200 mW)
● 20 dBm (100 mW)
● 20 dBm (100 mW)
● 17 dBm (50 mW)
● 17 dBm (50 mW)
● 14 dBm (25 mW)
● 14 dBm (25 mW)
● 11 dBm (12.5 mW)
● 11 dBm (12.5 mW)
● 8 dBm (6.25 mW)
● 8 dBm (6.25 mW)
● 5 dBm (3.13 mW)
● 5 dBm (3.13 mW)
● 2 dBm (1.56 mW)
Frequency band and
20-MHz operating
channels
5 GHz
● 23 dBm (200 mW)
A (A regulatory domain):
● 2.412 to 2.462 GHz; 11 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.500 to 5.700 GHz; 8 channels
(excludes 5.600 to 5.640 GHz)
● 5.745 to 5.825 GHz; 5 channels
B (B regulatory domain):
● 2.412 to 2.462 GHz; 11 channels
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
● 2 dBm (1.56 mW)
I (I regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
● 5.180 to 5.320 GHz; 8 channels
K (K regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.500 to 5.620 GHz; 7 channels
● 5.745 to 5.805 GHz; 4 channels
Page 6 of 12
Item
Specification
● 5.180 to 5.320 GHz; 8 channels
N (N regulatory domain):
● 5.500 to 5.720 GHz; 12 channels
● 2.412 to 2.462 GHz; 11 channels
● 5.745 to 5.825 GHz; 5 channels
● 5.180 to 5.320 GHz; 8 channels
C (C regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
● 5.745 to 5.825 GHz; 5 channels
D (D regulatory domain):
● 2.412 to 2.462 GHz; 11 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.745 to 5.825 GHz; 5 channels
E (E regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.500 to 5.700 GHz; 8 channels
(excludes 5.600 to 5.640 GHz)
F (F regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
● 5.745 to 5.805 GHz; 4 channels
G (G regulatory domain):
● 5.745 to 5.825 GHz; 5 channels
Q (Q regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.500 to 5.700 GHz; 11 channels
R (R regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.660 to 5.700 GHz; 3 channels
● 5.745 to 5.805 GHZ; 4 channels
S (S regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.500 to 5.700 GHz;, 11 channels
● 5.745 to 5.825 GHz; 5 channels
T (T regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
● 2.412 to 2.462 GHz; 11 channels
● 5.745 to 5.825 GHz; 5 channels
● 5.280 to 5.320 GHz; 3 channels
H (H regulatory domain):
● 5.500 to 5.700 GHz; 8 channels
● 2.412 to 2.472 GHz; 13 channels
(excludes 5.600 to 5.640 GHz)
● 5.150 to 5.320 GHz; 8 channels
● 5.745 to 5.825 GHz; 5 channels
● 5.745 to 5.825 GHz; 5 channels
Z (Z regulatory domain):
● 2.412 to 2.462 GHz; 11 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.500 to 5.700 GHz; 8 channels
(excludes 5.600 to 5.640 GHz)
● 5.745 to 5.825 GHz; 5 channels
Note: Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory
domain that corresponds to a particular country, visit http://www.cisco.com/go/aironet/compliance.
Maximum number of
non-overlapping
channels
2.4 GHz
● 802.11b/g:
◦ 20 MHz: 3
● 802.11n:
◦ 20 MHz: 3
5 GHz
● 802.11a:
◦ 20 MHz: 25 FCC, 16 EU
● 802.11n:
◦ 20 MHz: 25 FCC, 16 EU
◦ 40 MHz: 12 FCC, 7 EU
● 802.11ac:
◦
◦
◦
◦
20 MHz: 25 FCC, 16 EU
40 MHz: 12 FCC, 7 EU
80 MHz: 6 FCC, 3 EU
160 MHz 2 FCC, 1 EU
Note: This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain.
Compliance
standards
◦
◦
◦
◦
◦
◦
UL 60950-1
CAN/CSA-C22.2 No. 60950-1
UL 2043
IEC 60950-1
EN 60950-1
EN 50155
● Radio approvals:
◦ FCC Part 15.107, 15.109, 15.247, 15.407, 14-30
◦ RSS-247 (Canada)
◦ EN 300.328, EN 301.893 (Europe)
◦ ARIB-STD 66 (Japan)
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 7 of 12
Item
Specification
◦ ARIB-STD T71 (Japan)
◦ EMI and susceptibility (Class B)
◦ ICES-003 (Canada)
◦ VCCI (Japan)
◦ EN 301.489-1 and -17 (Europe)
◦ EN 60601-1-2 EMC requirements for the Medical Directive 93/42/EEC
● IEEE standards:
◦ IEEE 802.11a/b/g, 802.11n, 802.11h, 802.11d
◦ IEEE 802.11ac
● Security:
◦ 802.11i, Wi-Fi Protected Access 2 (WPA2), WPA
◦ 802.1X
◦ Advanced Encryption Standards (AES)
● Extensible Authentication Protocol (EAP) types:
◦ EAP-Transport Layer Security (TLS)
◦ EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2)
◦ Protected EAP (PEAP) v0 or EAP-MSCHAPv2
◦ EAP-Flexible Authentication via Secure Tunneling (FAST)
◦ PEAP v1 or EAP-Generic Token Card (GTC)
◦ EAP-Subscriber Identity Module (SIM)
● Multimedia:
◦ Wi-Fi Multimedia (WMM)
● Other:
◦ FCC Bulletin OET-65C
◦ RSS-102
Warranty
Limited lifetime hardware warranty
Data rates supported
802.11b: 1, 2, 5.5, and 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
802.11n HT20: 6.5 to 216.7 Mbps (MCS0 to MCS23)
802.11n HT40: 13.5 to 450 Mbps (MCS0 to MCS23)
802.11ac VHT20: 6.5 to 288.9 Mbps (MCS0 to 8 – SS 1, MCS0 to 9 – SS 2 and 3)
802.11ac VHT40: 13.5 to 600 Mbps (MCS0 to 9 – SS 1 to 3)
802.11ac VHT80: 29.3 to 1300 Mbps (MCS0 to 9 – SS 1 to 3)
802.11ac VHT160: 58.5 to 2304 Mbps (MCS0 to 9 – SS 1 and 2, MCS0 to 8 – SS 3)
Transmit Power and Receive Sensitivity
5-GHz Radio
2.4-GHz Flexible Radio
5-GHz Flexible Radio
Spatial
Streams
Total Tx Power
(dBm)
Rx Sensitivity
(dBm)
Total Tx Power
(dBm)
Rx Sensitivity
(dBm)
Total Tx Power
(dBm)
Rx Sensitivity
(dBm)
1 Mbps
1
NA
NA
23
-101
NA
NA
11 Mbps
1
NA
NA
23
-88
NA
NA
6 Mbps
1
23
-93
23
-91
23
-92
24 Mbps
1
23
-89
23
-87
23
-89
54 Mbps
1
23
-81
23
-77
22
-80
802.11/11b
802.11a/g
802.11n HT20
MCS0
1
23
-93
23
-91
23
-93
MCS4
1
23
-88
23
-86
23
-87
MCS7
1
23
-79
23
-77
22
-78
MCS8
2
23
-93
23
-91
21
-93
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 8 of 12
Item
Specification
MCS12
2
23
-86
23
-85
23
-86
MCS15
2
23
-79
23
-77
21
-78
MCS16
3
23
-93
23
-91
23
-92
MCS20
3
23
-85
23
-84
22
-84
MCS23
3
23
-78
23
-76
18
-77
802.11n HT40
MCS0
1
23
-90
23
-89
MCS4
1
23
-85
23
-84
MCS7
1
23
-76
23
-75
MCS8
2
23
-90
23
-89
MCS12
2
23
-83
23
-83
MCS15
2
23
-76
21
-76
MCS16
3
23
-90
23
-89
MCS20
3
23
-82
23
-81
MCS23
3
23
-75
20
-74
802.11ac VHT20
MCS0
1
23
-93
23
-92
MCS4
1
23
-88
23
-87
MCS7
1
23
-82
22
-80
MCS8
1
23
-77
21
-75
MCS0
2
23
-93
23
-91
MCS4
2
23
-86
23
-84
MCS7
2
23
-79
21
-77
MCS8
2
23
-75
20
-73
MCS9
2
NA
NA
NA
NA
MCS0
3
23
-93
23
-91
MCS4
3
23
-85
22
-83
MCS7
3
23
-78
20
-76
MCS8
3
23
-74
19
-72
MCS9
3
23
-72
18
-70
802.11ac VHT40
MCS0
1
23
-90
23
-89
MCS4
1
23
-85
23
-84
MCS7
1
23
-78
22
-77
MCS8
1
23
-75
21
-73
MCS9
1
23
-73
20
-72
MCS0
2
23
-90
23
-89
MCS4
2
23
-83
23
-82
MCS7
2
23
-76
21
-75
MCS8
2
23
-73
20
-72
MCS9
2
23
-71
19
-69
MCS0
3
23
-90
23
-89
MCS4
3
23
-82
23
-80
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 9 of 12
Item
Specification
MCS7
3
23
-74
20
-73
MCS8
3
23
-70
19
-68
MCS9
3
23
-69
18
-67
802.11ac VHT80
MCS0
1
23
-87
23
-86
MCS4
1
23
-83
23
-81
MCS7
1
23
-76
22
-74
MCS8
1
23
-72
21
-70
MCS9
1
23
-69
20
-68
MCS0
2
23
-87
23
-86
MCS4
2
23
-80
23
-79
MCS7
2
23
-73
21
-72
MCS8
2
23
-69
20
-68
MCS9
2
23
-67
19
-66
MCS0
3
23
-87
23
-86
MCS4
3
23
-77
23
-77
MCS7
3
23
-72
20
-70
MCS8
3
23
-67
19
-66
MCS9
3
22
-65
18
-64
802.11ac VHT160
MCS0
1
23
-83
23
-83
MCS4
1
23
-78
23
-78
MCS7
1
23
-71
22
-71
MCS8
1
23
-67
21
-68
MCS9
1
23
-66
20
-66
MCS0
2
23
-83
23
-83
MCS4
2
23
-76
23
-76
MCS7
2
23
-69
21
-69
MCS8
2
23
-65
20
-66
MCS9
2
23
-63
19
-63
MCS0
3
23
-82
23
-83
MCS4
3
23
-74
22
-74
MCS7
3
23
-67
20
-68
MCS8
3
23
-62
19
-62
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 10 of 12
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 11 of 12
Warranty Information
The Cisco Aironet 3800 Series Access Points come with a limited lifetime warranty that provides full warranty
coverage of the hardware for as long as the original end user continues to own or use the product. The warranty
includes 10-day advance hardware replacement and ensures that software media are defect-free for 90 days. For
more details, visit http://www.cisco.com/go/warranty.
Cisco Capital
Financing to Help You Achieve Your Objectives
Cisco Capital® can help you acquire the technology you need to achieve your objectives and stay competitive. We
can help you reduce CapEx. Accelerate your growth. Optimize your investment dollars and ROI. Cisco Capital
financing gives you flexibility in acquiring hardware, software, services, and complementary third-party equipment.
And there’s just one predictable payment. Cisco Capital is available in more than 100 countries. Learn more.
*
Post FCS
Printed in USA
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
C78-736498-06
03/17
Page 12 of 12
Download PDF
Similar pages