PC Network Interfaces
Cabinet Mount Switch
Industrial Ethernet
While Ethernet NICs are readily available from the
corner computer store, those retail products aren’t
designed to handle the protocols that are often found
in a factory application, or meet the processing
requirements associated with executing an automation
control program. applicom® Industrial Ethernet solution
provides high speed deterministic communication
between PC applications such as SCADA/HMI/MMI
packages, MES, RDBM, Office applications and various
PLC manufacturers and I/O modules.
Switches
The ENHSC provides cost effective
Ethernet Switching performance in a
• Store and forward switch
with address auto-learning
enhances bandwidth efficiency and aids in determinism for control application
• Magnetic mounting
method enables the
switch to be easily
attached to the inside of
an industrial
cabinet without the need
for special bracketing
• 10 Mbps/100 Mbps
autonegotiation enable
devices that transmit at
different speeds to reside
on the same subnet
• No programming required,
means the switch can be
up and running in a matter of minutes.
• Economically priced device
that still supports full wire
speed switching
rugged compact package. The metal
chassis with unique magnet mounting
provision enables the switch to be
attached on any metal surface, such as
the inside of an industrial enclosure.
The unit supports both half and full duplex communication as well as 10/100
auto-negotiation, and can operate at full wire speed like more expensive
switches. All five ports can support auto-detection of cross over, providing
complete flexibility on designation of an uplink port, and a variety of LED
indicator lights provide status information at a glance.
Specifications
.750"
(20mm)
4.370"
(111mm)
eliminates data
bottlenecks, ensuring
delivery of time critical
information
ELECTRICAL
POWER REQUIRED:
of open and vendor
specific industrial
protocols enabling
connectivity to numerous
factory automation
devices
• Single, protocol
independent API
structure, and built-in
diagnostic tools simplify
implementation
• 10/100 Mbps Network
If you need a wide range of Ethernet connectivity but
don’t want to learn how to use a multitude of OPC
servers, the PCI2000 ETH offers Ethernet communication
protocols from most major PLC vendors, delivered under
one consistent OPC server. The All-In-One
package also includes software interfaces such as DLL,
DDE, FastDDE, SuiteLink, and ActiveX. Optional fieldbus
and serial ports enable a single PC to communicate with
multiple networks.
Protocols
Support, client/server
modes and compatibility
POWER CONSUMPTION:
EMI EMISSIONS:
ELECTRICAL SAFETY:
ENVIRONMENTAL/
MECHANICAL
OPERATING TEMPERATURE:
OPERATING HUMIDITY:
ENVIRONMENTAL RATING:
NETWORK
PORTS:
ETHERNET STANDARDS:
systems enables use in a
120V AC TO 9V DC EXTERNAL
CONVERTER (SUPPLIED)
1.5 WATTS TYPICAL
FCC PART 15, CLASS B
UL, cUL, TUV
wide variety of
applications
• Compact PCI bus format
fits most PCs
32° TO 113°F (0° TO 45°C)
10% TO 90% (NON CONDENSING)
IP20
FIVE 10/100 BASE-T(X), RJ-45
IEEE 802.3, 802.3u, 802.3 AUTONEGOTIATION 10 OR 100 Mbps
(HALF DUPLEX), 20 OR 200 Mbps
(FULL DUPLEX)
128 KB BUFFER SHARING
PER PORT: LINK/ACTIVITY, DUPLEX
MODE/COLLISION, 10/100 Mbps
PER UNIT: POWER
PART NUMBER
DESCRIPTION
ENHSCURR5
ACTIVE SWITCH, CABINET MOUNT,
UNMANAGED, RJ-45 UPLINK PORT,
5 TOTAL PORTS
1-877-268-3700 SALES AND SUPPORT BY GROSS AUTOMATION
PART NUMBER
DESCRIPTION
PCI2000ETH/W32
ETHERNET NETWORK INTERFACE CARD PCI FORMAT HARDWARE
PC/AB-TCP
ALLEN-BRADLEY PCCC ON TCP/IP
PC/GE-TCP
GE SRTP AND ALSPA PROTOCOLS ON
TCP/IP
PC/MB-TCP
MODBUS PROTOCOL ON TCP/IP
PC/OM-TCP
OMRON FINS PROTOCOL ON TCP/IP
PC/TE-TCP
SCHNEIDER UNI-TE PROTOCOL ON TCP/IP
PC/SI-TCP
INDUSTRIAL ETHERNET (SIEMENS S5, S7
AND TI505) PROTOCOLS ON TCP/IP
PC/MI-TCP
MITSUBISHI MELSEC A AND Q PROTOCOLS
ON TCP/IP
www.connector.com
Network Interfaces
The built-in processor allows the card to be
independent of the operating system, perfect for
applications where performance is critical (50% more
throughput). No more data bottlenecks, slow screens,
lost data, and computer lockups!
• Supports a wide variety
Microsoft™ operating
BUFFERS:
LED INDICATORS:
130
• On-board co-processor
with a variety of
RECEPTACLE DIMENSIONS
Industrial Ethernet
Hardware
Specifications
ETHERNET •SCHNEIDER ETHWAY
(TSX PREMIUM, TSX MICRO, ETC)
• SIEMENS INDUSTRIAL ETHERNET ISO
(S5, S7, TF AND TI SERIES)
ETHERNET TCP/IP • ALSTOM SRTP (ALSPA C80-35 AND C80-75)
• AB ETHERNET/IP
(LOGIX5550, PLC-5 & SLC-500 SERIES)
• GE FANUC SRTP (90-30 AND 90-70 SERIES)
• MITSUBISHI MELSEC (A AND Q SERIES)
• OMRON FINS (C, CV AND CS SERIES)
• SIEMENS INDUSTRIAL ETHERNET
(S5, S7 AND TI505 SERIES)
• SCHNEIDER MODBUS TCP
(TSX PREMIUM, TSX MICRO, ETC)
• SCHNEIDER UNI-TE
(TSX PREMIUM, TSX MICRO, ETC)
• SEND/RECEIVE ON UDP (FREE MESSAGING)
• DEVELOPMENT TOOLKIT FOR TCP/IP
PROTOCOLS
UNIT:
PROCESSOR:
MEMORY:
APPROVALS:
OPERATING TEMPERATURE:
ETHERNET PORT:
PCI PC BOARD (SHORT LENGTH, SINGLE
WIDTH) 175mm X 107mm (6.89" X 4.21")
AMD SC520 - 133 MHZ
8 MBYTES DYNAMIC RAM
COMPLIES WITH EMC FOR BOTH INDUSTRIAL
AND OFFICE USE
0º C (32º F) UP TO +65º C (149º F)
1 ETHERNET PORT (IEEE 802.3) FOR
INDUSTRIAL AND OFFICE USES
10/100BASET (RJ45) OR SIEMENS ITP
FAST ETHERNET 10/100 MBPS
NDIS DRIVER FOR NT 4.0
Note: The network interface card, and the supported protocols must be ordered as
separate line items. All protocol drivers are single station licenses. Contact Woodhead
Connectivity Customer Service for information on site licenses and serial and fieldbus
network options.
FA X 1 - 8 4 7 - 2 7 2 - 8 1 3 3
131
Download PDF
Similar pages