lte outdoor cpe jw0100 - Jaton Technology Limited

The Specification of JW0100
The Specification
of
LTE OUTDOOR CPE JW0100
Version: V1.00
Issue Date: 2016-2-8
www.jatontec.com
1
The Specification of JW0100
Part I Product Overview
The JW0100 outdoor wireless router is one high performance outdoor CPE
platform. The JW0100 CPE has the superior wireless access performance and
comprehensive routing capabilities, which have the abilities to bring the mobile
operators or the vertical market to rapidly deploy wireless services, achieve
profitability as soon as possible.
Part II Main Features
The main features of JW0100 include:
 Comply to 3GPP Release 9 CAT4
 LTE TDD Band 42/43 or Band38 or Band40, Band41 (with different module inside)














Support the 100Mbps Ethernet WAN.
Built-in dual-polarized directional high gain antenna
Fast Ethernet port support
NAT mode, bridge mode and router mode support
support VPN, L2tp, IPsec, PPTP
Intuitionist and convenient Web-based management.
IPV6/IPV4 Dual Stack.
Support TR069 management protocol.
Support Cell lock. SIM lock. Pin lock
User-friendly design of LED indicator.
Power supply with PoE
IP65 protection level
Lightening protection
Support pole installation or wall mounting.
www.jatontec.com
2
The Specification of JW0100
Part III Parameters and Application
Table 1 Hardware and Software Specifications
Item
Description
Platform and Chipset
AP Chipset
Sequans SQN3120
Modem Chipset
Sequans SQN3120+SQN3140
Flash + DDR
256Mb+512Mb
Hardware Specifications

LTE TDD Band 42 and 43
3400 MHz~ 3600 MHz, 3600MHz~3800MHz

Or LTE TDD Band 38
2570MHz~2620MHz

Or LTE TDD Band 40
2300 MHz – 2400 MHz,
Operating Frequency

Or LTE TDD Band 41
2496 MHz – 2690 MHz
Or LTE FDD band3
1800MHz-1880MHz
Network Supported
Power Class
Maximum
Power
Consumption
Antenna
LTE TDD B42/43 or B38 or B40 or B41 or LTE FDD band3(with
different module inside)
B42/43:
25±2dBm
Others:
23±2dBm
4W
Build in 1T2R dual-polarized directional antenna, gain: 12dBi
Interface Specifications
Power supply
PoE, through RJ45 port
8VDC
SIM/USIM Card Slot
Standard SIM card interface, in line with the 3GPP31.101 and 31.102
Reset
Button
RJ45
1
LED
See the indicator definition
Physical Features
Unit Size (mm)
245(H)× 135 (W)× 50 (T)mm
www.jatontec.com
3
The Specification of JW0100
About 600g
Weight
Gray or other customization color
Color
Operation Environmental Spec.
Operating Temperature: -40ºC~55C
Temperature
Storage Temperature: -40ºC~70ºC
Operation Humidity: 10%~90%
Humidity
Storage Humidity: 5%~95%
Lightening Protection
Differential mode: ±1kV(1.2/50us,differential pairs); ±1kV (1.2/50us)
Common mode: ±1.5kV (1.2/50us, 8 line to ground),±2kA (8/20us)
Supporting Windows XP above SP3, Window 7, Vista, Linux
CPU: Pentium 500MHz or above
System Requirements
Memory: 128MB RAM or more
Hard Disk: 50MB free space
Standard USB interface
Table 2 LED Definitions
CPE State
Description
LED Behavior
Power On
Power supply normal
Power LED on
Detect with no
After CPE power on,
Power LET and
SIM card
detecting no SIM card
three signal
LED illustration
strength LEDs
blinking together,
the frequency is 2
times per second.
Scanning the
Scanning the LTE network
LTE network
The first signal
strength LED
blinking
Network
CPE is authenticating
Authentication
Two signal
strength LEDs
blinking
Getting IP
CPE getting IP address
Three signal
Address
from LTE network
strength LEDs
blinking
www.jatontec.com
4
The Specification of JW0100
Signal Strength
Signal strength is weak
weak
Only first signal
strength LED on,
the other two off
Signal Strength
Signal strength is good
good
Signal Strength
Two signal
strength LEDs on
Signal strength is strong
strong
Three signal
strength LEDs on
Firmware
CPE starting the firmware
The first four
Upgrading
upgrading
LEDs blinking
alternately
LAN connected
With local LAN connected
LAN LED
indicator flashing
The physical ports illustrator
www.jatontec.com
5
The Specification of JW0100
Table 3 SW Specifications
Item
Language Settings
Description
Basic options: Simple Chinese , English
Multiple Languages can be customized.
1 Bridge mode
Network mode
2 Router mode
3 NAT mode
Http&Https
Multiuser support
Data service
Support the http or https web server
Support two users(admin user and normal user) and different limitation and
display
Ethernet 10/100Mbps
TDD LTE DL 120Mbps
UL 50Mbps
100Mbit/s
LAN
MDI/MDIX auto-sensing
IEEE802.3/802.3u is compatible
SIM
Configuration
import and export
Maintenance
PIN Management, sim card Authentication
Encryption backup current settings and restore the backup settings
Export current diagnosis results and operation logs
1 Link Status (lan)
Statistics
2 Transmit / receive traffic in packets
3 Up Time
Network connection
setup
1 Create, delete, and edit APNs
2 Set up dial-up connection automatically.
3 Set up dial-up connection manual
VPN
Support PPTP tunnel mode
IP Protocol
ipv6/ipv4 dual stack
1 Signal strength
2 Network type
Status
3 Network connection status
4 SIM card status
5 Operator name, system mode, and so on
Cell lock
Control thedevice to be locked on limitedarea around customer home
Sim lock
Only carrier SIM shall work in the CPE.
www.jatontec.com
6
The Specification of JW0100
Table 4 Device Management
Image One Version
Image One Checksum
Integrity Check
Image Two Version
Image Two Checksum
Version Rollback
Auto Rollback to previous version when upgrade fail
Full image upgrade
Firmware upgrade manully
Software Upgrade
HTTP/FTP
Upgrade
Auto
Enable / Disable Upgrade Firmware
Upgrade URL
Version file
Check new firmware every (hr.: 1~744)
Start Time
Random Time
Configuration
backup
Configuration
Supports upload / download the ACS specified file; Support download
CPE configuration file
Support queries following parameters: PCI / RSRP / RSRQ / SINR /
Transmit power / DL Packet Error Rate (PER) / MCS
Data rate in downlink and uplink / MIMO mode in progress
Support configure the following parameters: Wan Configuration:
Operation Mode, WAN Protocol, Get IP Method, WAN IP Address,
WAN IP Subnet Mask, MTU;
DHCP Server Configuration: DHCP Mode, Start IP, End IP, Lease
Time, Relay IP
TR069
DMZ configuration: DMZ Host;
Support remote upgrade: Support batch or for individual CPE remote
version upgrade and rollback operations;
Support CPE version update
Supports debugging operations: reboot, restore factory settings,
remote PING bag, burn and change ACL address
Support cycle monitor: According to the server instructions,
periodically reporting corresponding parameters: including device
performance (Data rate in downlink and uplink, DL Packet Error Rate
(PER), MCS, MIMO mode, etc.) and RF parameters (PCI, RSRP,
RSRQ, SINR, Transmit power, etc.)
DINC
Support the DINC.
Port mirror
Can enable or disable the port mirror function
syslog
Support the syslog function can send the log to the PC via LAN.
Diagnostics
Support the Ping and trace route
www.jatontec.com
7
The Specification of JW0100
Table 5 Bridge mode
Item
Data traffic forward
Maximum
4
PCs
support
Module
can
be
managed
Public IP allocation
Multiple APN
Description
Forward the data traffic between the LTE network and PCs.
Each PC connect to the LTE public network via one APN
One APN can be allocation for the module and the module can be
managed via TR069 such remote update version
PC get the public IP dynamic from the DHCP server in the CPE. The IP
is public CPE get from LTE network.
Up to 4 APNs support, and can set the static router for each APN
Table 6 Router Mode
Item
Description
LAN
Can be set 2 IP addresses on the LAN and for 2 different Network.
WAN
WAN IP can be set dynamic or static.
Router protocol
Not support current
DNS
Can be set
Multiple APN
Up to 4 APNs support, and can set the static router for each APN
Table 7 NAT Mode
Item
Description
NAT
the NAT function can be support.
Firewall
Can enable or disable the firewall
Multiple APN
Up to 4 APNs support, and can set the static router for each APN
DMZ
The DMZ can be set.
DHCP server
Support the DHCP server
DNS
Support the auto DNS or manual DNS configuration
Table 8 Firewall
Enable Firewall
Allow Ping from WAN
Firewall
Allow HTTPs login from WAN
Configuration
HTTPs Login Port from WAN
DMZ IP Address
Redirect ICMP to the Host
IP Filter
Support the IP filter
MAC Filter
Support the MAC Filter
www.jatontec.com
8
The Specification of JW0100
URL Filter
Support the URL Filter
UPnP
Support UPnP
Port forwarding
Support the Port forwarding
Name
Enable
Access Restriction
Blocked Day / Blocked Time
Blocked Device
Blocked Reason
Table 9 Standard Package
Item
Description
JW0100 Outdoor CPE
POE adapter
Accessories
1 PCS
1 PCS
for
mounting
Quick Start Manual
pole
1 PCS
1 PCS
www.jatontec.com
9
Download PDF
Similar pages