ADM-2.1
Two Channel Second Zone Amplifier
FEATURES
GENERAL:
CONNECTIONS:
•
•
Input level adjustment
•
12V Remote turn-on
•
Input/output loop
Perfect for second zone and distributed audio applications
AMPLIFIER:
•
•
•
2 x 125 Watts/Channel at 6Ω
2 x 100 Watts/Channel at 8Ω
Wide Range Amplifier Technology — WRAT (10 Hz-100 kHz)
MISCELLANEOUS:
• Audio-sensing
power on
•
Binding post speaker terminals
•
Solid brushed aluminum front panel
•
Optional rack mount kit available-IRK-130-3
Designed to Integrate. Built to Stimulate.
ADM-2.1
Two Channel Second Zone Amplifier
SPECIFICATIONS
AMPLIFIER SECTION
GENERAL
Continuous average power output (FTC) Power supply:
All channels:100 W per channel min. RMS at 8Ω,
both channels driven from 20 to 2kHz
with no more than 0.08% total harmonic
distortion.
125 W per channel min. RMS at 6Ω,
both channels driven from 1 kHz
with no more than 0.1% total
harmonic distortion.
Dynamic power output: 2 x 140 W at 8Ω
Signal-to-noise ratio:
110 dB (IHFA, 0.5 V input)
Frequency response:
Total harmonic distortion:
Damping factor:
Power consumption:
AC 120 V, 60 Hz
2.5 A
Dimensions (W x H x D):17-1/8” x 5-11/16” x 12-7/16”
435 x 145 x 316 mm
Optional mounting kit:
IRK-130-3
Weight:
U dimension:
18.7 lbs. (8.5 kg)
3U
10 Hz to 100 kHz ± 1 dB
0.08% at rated power
100 at 8Ω
Input sensitivity and impedance:1 V, 50 kΩ
Output level and impedance:
Rated speaker impedance:
1 V, 10 kΩ
6Ω min
Due to a policy of continuous product improvement, Integra reserves the right to
change specifications and appearance without notice.
2/2008 Printed in the USA
Designed to Integrate. Built to Stimulate.
www.integrahometheater.com
Download PDF
Similar pages