lancom gs-1326 - LANCOM Systems GmbH

Switches
LANCOM GS-1326
Websmart 26-port Gigabit Ethernet Switch for cost-effective networks
The websmart switch LANCOM GS-1326 is the ideal choice for networks in small and medium-sized businesses.
Able to network up to 26 devices, it offers a compelling price/performance ratio. It is equipped with 24 Gigabit
Ethernet ports and 2 combo ports (Ethernet or fiber optics) and it supports a wide range of security features.
The switch is operated via a user-friendly web interface.
a 24 Gigabit Ethernet and 2 combo ports (TP/SFP)
a Security with configurable access control on all ports based on IEEE 802.1X
a VLAN and QoS support
a Browser-based configuration
a IPv6 and IPv4 support for modern networks
DATASHEET
LANCOM GS-1326
Reliable networking for up to 26 devices
The LANCOM GS-1326 is equipped with 24 Gigabit Ethernet
ports and 2 combo ports (Ethernet or fiber optics). This makes
the switch a reliable basis for modern network infrastructures
in small and medium-sized businesses.
Configurable access control
The LANCOM GS-1326 stops rogue clients from gaining
unauthorized access to the network. This is ensured by
secured access control on all ports as per IEEE 802.1X
(port-based, single-based, multi-based, and MAC-based).
Browser-based configuration
The switch is managed with a user-friendly web interface.
The LANCOM GS-1326 supports VLAN tagging based on
IEEE 802.1q and makes it easy to assign VLANs to the desired
switch ports. What's more, the incoming and outgoing data
traffic is reliably prioritized with a wide range of QoS features.
IPv6 and IPv4 support
Thanks to the dual-stack implementation, the LANCOM
GS-1326 operates in pure IPv4, pure IPv6, or in mixed
networks. This means that it can be managed via both IP
address standards, which makes it fully future-proof.
DATASHEET
LANCOM GS-1326
Security
IEEE 802.1X
IEEE 802.1X access control on all ports; RADIUS for authentication, authorization and accounting with MD5 hashing; guest VLAN;
dynamic VLAN assignment
Private VLAN edge
Layer 2 isolation between clients in the same VLAN ('protected ports''); support multiple uplinks
Port security
Locking of MAC addresses to ports; limiting of the number of learned MAC addresses
IP source guard
Blocking access for illegal IP addresses on specific ports
Access control lists
Drop or rate limitation of connections based on source and destination MAC addresses, VLAN ID, IP address, protocol, port, DSCP/IP
precedence, TCP/UDP source and destination ports, IEEE 802.1p priority, ICMP packets, IGMP packets, TCP flag
RADIUS
Authentication, authorization and accounting of configuration changes by RADIUS
Storm Control
Multicast/Broadcast/Unicast storm suppression
Isolated Group
Allows certain ports to be designated as protected. All other ports are non-isolated. Traffic between isolated group members ist blocked.
Traffic can only be sent from isolated group to non-isolalted group.
Performance
Switching technology
Store and forward with latency less than 4 microseconds
MAC addresses
Support of max 8K MAC addresses
Throughput
Max. 52 Gbps on the backplane
Maximum packet processing
38.69 million packets per second (mpps) at 64-byte packets
VLAN
Port based and IEEE 802.1q tag based VLAN with up to 4,096 VLAN and up to 4,000 active VLANs; Supports ingress and egress packet
filter in port based VLAN
Jumbo frame support
Jumbo frame support with up to 9k frames
Energy efficiency (Green Ethernet)
Energy detection
Energy efficiency according to IEEE 802.3az. Automatically turns off power on Gigabit Ethernet RJ-45 port when detecting link down
or Idle of client. Active mode is resumed without loss of any packets when the switch detects the link up
Cable length detection
Adjusts the signal strength based on the cable length. Reduces the power consumption for short cable
Layer 2 switching
Link Aggregation Control Protocol (LACP)
Support of 13 groups containing up to 4 ports each according to IEEE 802.3ad
VLAN
Support for up to 4K VLANs simultaneously (out of 4096 VLAN Ids); matching due to port, IEEE 802.1q tagged VLANs or MAC adresses
Voice VLAN
Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS
IGMP multicasts
IGMP v1, v2, v3 to limit bandwidth-intensive multicast traffic to ports with requesters; supports 256 multicast groups; source-specific
multicasting
IGMP querier
Support of multicast domains of snooping switches in the absence of a multicast router
IGMP proxy
IGMP proxy to pass IGMP messages through
Generic VLAN registration
VLAN registration with GVRP according to IEEE 802.1q for automatic delivery of VLANs in bridged domains
Spanning Tree Protokoll (STP) / Rapid STP
/ Multiple STP
Standard Spanning Tree according to IEEE 802.1d with fast convergence support of IEEE 802.1w (RSTP); using Multiple Spanning Tree
instances by default according to IEEE 802.1s (MSTP)
Interfaces
Ethernet
1 24 TP ports 10/100/1000 Mbps
1 2 combo ports (TP/SFP) with 100/1000 Mbps (SFP) and 10/100/1000 Mbps (TP)
1 26 concurrent Ethernet ports in total
Management and monitoring
WEBconfig
Integrated web server with setup wizard for the configuration via Internet browsers with HTTP or HTTPS. Web interface with system
dashboard, configuration menu, maintenance and monitoring functions
DATASHEET
LANCOM GS-1326
Management and monitoring
Port Mirroring
Traffic can be mirrored from on port to another for investigation with network analyzer or RMON probe. Up to 8 ports can be mirrored
to a single mirror port. Single sessions can be selected
Security
Access rights (read/write) can be set up separately, access control list
SNMP
SNMP management via SNMPv1, v2c or v3 with support of traps. User-based security model for SNMPv3 (USM)
Diagnosis
Diagnosis from the switch with PING and cable diagnosis
Firmware update
1 Update via WEBconfig and browser (HTTP/HTTPS)
1 Update via TFTP and LANconfig
1 Dual firmware image to update during operation
DHCP client
Automatic assignement of the management IP address by DHCP
SNTP
Automatic time settings with Simple Network Time Protocol (SNTP)
Hardware
Weight
5,50 lbs (2,50 kg)
Power supply
Internal power supply unit (110–230 V, 50-60 Hz)
Environment
Temperature range 0–40° C; humidity 10–90%; non-condensing
Housing
Robust metal housing, 19" 1U (442 x 44 x 170,3 mm > W x H x D) with removable mounting brackets, network connectors on the
front
Fans
None; fanless design without rotating parts, high MTBF
Power consumption (max)
23 watt
Declarations of conformity*
CE
EN 60950-1, EN 55022, EN 55024
FCC
FCC Part 15 (CFR47) Class A
*) Note
You will find all declarations of conformity in the products section of our website at www.lancom-systems.eu
Supported IEEE standards
IEEE 802.1AB
Link Layer Discovery Protocol (LLDP)
IEEE 802.1AB
LLDP-MED
IEEE 802.1ad
Q-in-Q tagging
IEEE 802.1d
MAC Bridging
IEEE 802.1d
Spanning Tree
IEEE 802.1p
Class of Service
IEEE 802.1q
VLAN
IEEE 802.1s
Multiple Spanning Tree Protocol (MSTP)
IEEE 802.1w
Rapid Spanning Tree Protocoll (RSTP)
IEEE 802.1X
Port Based Network Access Control
IEEE 802.3
10Base-T Ethernet
IEEE 802.3ab
1000Base-TX Ethernet
IEEE 802.3ad
Link Aggregation Control Protocol (LACP)
IEEE 802.3az
Energy Efficient Ethernet
IEEE 802.3u
100Base-T Ethernet
IEEE 802.3x
Flow Control
DATASHEET
LANCOM GS-1326
Supported IEEE standards
IEEE 802.3z
1000Base-X Ethernet
RFC 1215
SNMP Generic Traps
RFC 1769
Simple Network Time Protocol (SNMP)
RFC 2613
SMON MIB
RFC 2617
HTTP Authentication
RFC 2818
Hypertext Transfer Protocol Secure (HTTPS)
RFC 2819
Remote Network Monitoring MIB (RMON)
RFC 2863
Interface Group MIB using SMIv2
RFC 2933
IGMP MIB
RFC 3414
User based Security Model for SNMPv3
RFC 3415
View based Access Control Model for SNMP
RFC 4668
RADIUS Authentication Client MIB
RFC 4670
RADIUS Accounting MIB
Scope of delivery
Manual
Hardware Quick Reference (DE/EN), Installation Guide (DE/EN)
Cable
IEC power cord
19" brackets
Two 19" brackets for rackmounting
Support
Warranty
2 years support
LANCOM Warranty Advanced Option S
Option for replacement of a defective device, item no. 10715
Accessories
1000Base-SX SFP module
LANCOM SFP-SX-LC1, item no. 61556
1000Base-LX SFP module
LANCOM SFP-LX-LC1, item no. 61557
Item number(s)
LANCOM GS-1326 (EU)
61438 (EU)
LANCOM GS-1326 (UK)
61439 (UK)
Gehäusezeichnung
LANCOM GS-1326
System
Reset
www.lancom-systems.com
LANCOM Systems GmbH I Adenauerstr. 20/B2 I 52146 Wuerselen I Germany I E-Mail info@lancom-systems.com
LANCOM, LANCOM Systems and LCOS are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. Subject to change without notice. No liability for
technical errors and/or omissions. 01/18
Supported RFC standards
Download PDF
Similar pages