Owner’s Manual
Blu-ray DiscTM Player
Model No.
DMP-UB400
DMP-UB300
Unless otherwise indicated, illustrations in these Owner’s Manual are of DMP-UB400.
Firmware updates
Panasonic is constantly improving the unit’s firmware to ensure
that our customers are enjoying the latest technology.
Panasonic recommends updating your firmware as soon as you
are notified.
For details, refer to “Firmware updates” (> 18) or
http://panasonic.jp/support/global/cs/ (This site is in English only.)
Thank you for purchasing this product.
Please read these instructions carefully before using this product, and save this manual for future use.
If you have any questions, visit :
www.panasonic.ca/english/support
TQBS0106
PC
until
2016/9/20
IMPORTANT SAFETY
INSTRUCTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Read these operating instructions carefully before using the unit.
Follow the safety instructions on the unit and the applicable safety
instructions listed below. Keep these operating instructions handy for
future reference.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding-type plug has two blades and
a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the
obsolete outlet.
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
Only use attachments/accessories specified by the
manufacturer.
Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
Unplug this apparatus during lightning
storms or when unused for long periods of
time.
Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
[UB400]
This device complies with Industry Canada’s licence-exempt RSSs.
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.
Contains IC: 1353A-WLU5260
5.15-5.25 GHz band is restricted to indoor operatinos only.
High-power radars are allocated as primary users (i.e. priority users)
of the bands 5250-5350 MHz and 5650-5850 MHz and that these
radars could cause interference and/or damage to LE-LAN devices.
This equipment complies with IC radiation exposure limits set forth
for an uncontrolled environment and meets RSS-102 of the IC radio
frequency (RF) Exposure rules.
This equipment has very low levels of RF energy that are deemed to
comply without testing of specific absorption ratio (SAR).
But it is desirable that it should be installed and operated keeping
the radiator at least 20 cm (7 7/8q) or more away from person’s body
(excluding extremities: hands, wrists, feet and ankles).
CAN ICES-3(B)/NMB-3(B)
Certified to CAN/CSA STD C22.2 No.60065.
-2-
Precautions
Restriction on use of
unauthorized copied content
WARNING
Unit
To reduce the risk of fire, electric shock or product damage,
≥ Do not expose this unit to rain, moisture, dripping or splashing.
≥ Do not place objects filled with liquids, such as vases, on this
unit.
≥ Use only the recommended accessories.
≥ Do not remove covers.
≥ Do not repair this unit by yourself. Refer servicing to qualified
service personnel.
AC power supply cord
The power plug is the disconnecting device.
Install this unit so that the power plug can be unplugged from the
socket outlet immediately.
This unit adopts the following technology for copyright protection.
Cinavia Notice
This product uses Cinavia technology to limit the use of
unauthorized copies of some commercially-produced film and
videos and their soundtracks. When a prohibited use of an
unauthorized copy is detected, a message will be displayed and
playback or copying will be interrupted.
More information about Cinavia technology is provided at the
Cinavia Online Consumer Information Center at
http://www.cinavia.com. To request additional information about
Cinavia by mail, send a postcard with your mailing address to:
Cinavia Consumer Information Center, P.O. Box 86851, San
Diego, CA, 92138, USA.
[UB400]
CAUTION
Wireless LAN connection
Unit
≥ This unit utilizes a laser. Use of controls or adjustments or
performance of procedures other than those specified herein
may result in hazardous radiation exposure.
≥ Do not place sources of naked flames, such as lighted candles,
on this unit.
≥ Some portions of this unit may become hot during use. When
moving or cleaning this unit, disconnect the AC power supply
cord and wait for 3 minutes or longer.
Placement
To reduce the risk of fire, electric shock or product damage,
≥ Do not install or place this unit in a bookcase, built-in cabinet or
in another confined space. Ensure this unit is well ventilated.
≥ Do not obstruct this unit’s ventilation openings with newspapers,
tablecloths, curtains, and similar items.
≥ Do not place the unit on amplifiers/receivers or equipment that
may become hot. The heat can damage the unit.
Batteries
Mishandling of batteries can cause electrolyte leakage and may
cause a fire.
≥ Danger of explosion if battery is incorrectly replaced. Replace
only with the type recommended by the manufacturer.
≥ When disposing of the batteries, please contact your local
authorities or dealer and ask for the correct method of disposal.
≥ Do not mix old and new batteries or different types at the same
time.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in a car exposed to direct sunlight
for a long period of time with doors and windows closed.
≥ Do not take apart or short circuit.
≥ Do not recharge alkaline or manganese batteries.
≥ Do not use batteries if the covering has been peeled off.
The following limits are in place regarding the usage of this unit.
You must be aware of these limits before using this unit.
Panasonic will in no way be responsible for any incidental damage
which may arise due to a failure to obey these limits, or to any
condition of use or disuse of this unit.
≥ Data transmitted and received over radio waves may be
intercepted and monitored.
≥ This unit contains delicate electronic components.
Please use this unit in the manner in which it was intended and
follow the following points:
– Do not expose this unit to high temperatures or direct
sunlight.
– Do not bend, or subject this unit to strong impacts.
– Keep this unit away from moisture.
– Do not disassemble or alter this unit in any way.
To dispose or transfer this unit
The unit may keep the user settings information in the unit. If you
discard this unit either by disposal or transfer, then follow the
procedure to return all the settings to the factory presets to delete
the user settings. (> 35, “To return all settings to the factory
preset.”)
≥ The operation history may be recorded in the memory of this
unit.
Remove batteries if you do not intend to use the remote control for
a long period of time. Store in a cool, dark place.
-3-
Table of contents
IMPORTANT SAFETY
INSTRUCTIONS . . . . . . . . . . . . 2
Precautions . . . . . . . . . . . . . . . . . 3
Getting started
Accessories . . . . . . . . . . . . . . . . . 5
Unit and media care . . . . . . . . . . . 5
Playable media. . . . . . . . . . . . . . . 6
Control reference guide . . . . . . . . 8
Connecting to a TV . . . . . . . . . . 10
Connecting to
an amplifier/receiver . . . . . . . . . 11
Connecting to the network . . . . . 16
Settings . . . . . . . . . . . . . . . . . . . 17
Playback
HOME menu . . . . . . . . . . . . . . .
Playback. . . . . . . . . . . . . . . . . . .
Network Service
(Enjoying NETFLIX, etc.) . . . . .
Home Network feature . . . . . . . .
VIERA Link . . . . . . . . . . . . . . . . .
Option menu. . . . . . . . . . . . . . . .
19
19
22
23
25
26
Reference
Setup menu. . . . . . . . . . . . . . . . . 29
Troubleshooting guide . . . . . . . . 35
Specifications . . . . . . . . . . . . . . . 40
Licenses . . . . . . . . . . . . . . . . . . . 43
Limited Warranty. . . . . . . . . . . . . 45
Index . . . . . . . . . . . . . . . Back cover
To enjoy Ultra HD Blu-ray Disc featured with
High Dynamic Range (HDR)
If you see a message about High Dynamic
Range (HDR) compatible issue while an Ultra
HD Blu-ray Disc is played back, please check
your TV settings as follows.
An example of the message:
“This player is not connected to a High Dynamic
Range (HDR) compatible TV.”
1) If you are using a Panasonic TV compatible
with 4K and High Dynamic Range (HDR)
released in 2015 or 2016, (DX900/DX800/
DX700 series etc.), please check your TV
settings as follows.
– Switch the TV to the HDMI input.
– Press “MENU” button of your TV remote
control
– Select “HDMI HDR Setting” in “Setup”
– Select “On” in “HDMI HDR Setting”
2) If you use a TV not from Panasonic,
compatible with 4K and High Dynamic Range
(HDR), please refer to the operating
instructions of the TV.
3) When you play a High Dynamic Range (HDR)
disc on a TV without High Dynamic Range
(HDR) capability, the disc can be played back
(in non-HDR quality) even if the message
appears.
-4-
Getting started
Accessories
Unit and media care
Check the supplied accessories before using this
unit.
1 Remote control
(N2QAYB001157)
2 Batteries for remote control
1 AC power supply cord
(K2CB2YY00092)
∫ Clean this unit with a soft, dry cloth
Getting started
≥ Never use alcohol, paint thinner or benzine to
clean this unit.
≥ Before using chemically treated cloth, carefully
read the instructions that came with the cloth.
∫ This unit’s lens
Use the lens cleaner (not supplied) to clean the
unit’s lens.
The enclosed Canadian French label sheet corresponds
to the English display on the unit.
∫ Clean discs
DO
≥ Product numbers are provided in this Owner’s Manual
correct as of April 2017.
These may be subject to change.
≥ Do not use AC power supply cord with other equipment.
∫ Using the remote control
DO NOT
Wipe with a damp cloth and then wipe dry with a
dry cloth.
Insert the batteries to the terminal so that it (i
and j) matches those in the remote control.

∫ Disc handling precautions

R6/LR6, AA
(Alkaline or manganese batteries)
Point it at the remote control signal sensor on this
unit. (> 9)
≥ Handle discs by the edges to avoid inadvertent
scratches or fingerprints on the disc.
≥ Do not attach labels or stickers to discs.
≥ Do not use disc cleaning sprays, benzine,
thinner, static electricity prevention liquids or
any other solvent.
≥ Do not use the following discs:
– Discs with exposed adhesive from removed
stickers or labels (rented discs, etc.).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart
shapes.
-5-
Getting started
Playable media
Device
Media markings
BD
Device types
Ultra HD Blu-ray*1*2
Video
BD-Video
Video
BD-RE
Video,
JPEG, MPO
BD-R
Video, MKV,
JPEG, MPO
DVD-Video
DVD-R
DVD
DVD-R DL
DVD-RW
—
—
USB
—
Video
Video, AVCHD, MKV,
JPEG, MPO,
AAC, ALAC,
DSD (DFF, DSF),
FLAC, MP3, WAV,
WMA
Video, AVCHD
+R/+RW/+R DL
Music CD
CD
Contents format
Music [CD-DA]
CD-R
CD-RW
MKV,
JPEG, MPO,
AAC, ALAC, FLAC,
MP3, Music [CD-DA],
WAV, WMA
USB devices
(up to 2 TB)
AVCHD, AVCHD 3D,
MKV, MP4, MPEG2,
JPEG, MPO,
AAC, ALAC,
DSD (DFF, DSF),
FLAC, MP3, WAV, WMA
≥ See pages 7 and 40 for more information on the types of content that can be played.
*1
*2
See “Enjoying Ultra HD Blu-ray” (> 21)
Unless otherwise indicated, BD-Video content includes Ultra HD Blu-ray content in this Owner’s Manual.
-6-
Getting started
∫ Types of discs that cannot be played
by this unit
∫ USB device
≥ Connect a USB device while the Home screen
is displayed.
≥ This unit does not guarantee connection with all
USB devices.
≥ This unit does not support USB device
charging.
≥ FAT12, FAT16, FAT32, and NTFS file systems
are supported.
≥ The USB port on the front of the unit supports
USB 2.0 High Speed and the USB port on the
rear supports to USB 3.0 Super-Speed.
≥ The USB port on the rear of the unit supports an
HDD formatted in FAT32 and NTFS. If the HDD
is not recognized, the power to the HDD may
not be supplied. Supply power from an external
source.
≥ It is not possible to use two USB devices
simultaneously. (> 36)
≥ For playback of 4K videos stored on a USB
device, use USB 3.0 port on rear of the unit and
USB device conforming to USB 3.0.
Any other disc that is not specifically
supported or previously described.
≥ DVD-RAM
≥ Super Audio CD
≥ Photo CD
≥ DVD-Audio
≥ Video CD and Super Video CD
≥ HD DVD
∫ Region management information
The unit can play back BD-Video/DVD-Video
discs of the following regions codes, including
“ALL”:
Example:
BD-Video
DVD-Video
1
≥ The unit cannot playback discs in PAL format.
∫ Finalize
Any DVD-R/RW/R DL, +R/+RW/+R DL and
CD-R/RW that are recorded by a recorder need to
be finalized by the recorder to play on this unit.
Please refer to the recorder’s owner’s manuals.
∫ BD-Video
This unit supports high bit rate audio (Dolby®
Digital Plus, Dolby® TrueHD, DTS-HD High
Resolution AudioTM and DTS-HD Master AudioTM)
adopted in BD-Video.
≥ It may not be possible to play the above media in some
cases due to the type of media, the condition of the
recording, the recording method, and how the files were
created.
≥ The producers of the disc can control how discs are
played, so you may not always be able to control play as
described in this Owner’s Manual. Read the disc’s
instructions carefully.
∫ 3D
3D videos and 3D still pictures can be played
back when this unit is connected to a 3D
compatible TV using a High Speed HDMI Cable.
∫ Music CD
≥ Operation and sound quality of CDs that do not
comply with CD-DA specifications (copy control
CDs, etc.) cannot be guaranteed to work.
≥ The digital audio content side of a DualDisc
does not meet the technical specifications of
the Compact Disc Digital Audio (CD-DA) format
so playback may not be possible.
-7-
Getting started
Control reference guide
∫ Remote control
When other Panasonic devices respond to the
remote control of the unit, change the remote
control code. (> 34)
1
2
10
3
1
11
2
12
4
13
3
14
15
4
16
5
6
17
18
7
19
20
8
21
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
9
21
-8-
Turn the unit on and off
TV operation buttons
You can operate the Panasonic TV using this
unit’s remote control. Some buttons may not
work depending on the TV.
Select title numbers, etc./Enter numbers or
characters
Cancel
Clear the currently selected character.
(when entering a password for “Ratings” in
the Setup menu, for example)
Basic playback control buttons (> 19)
Show Pop-up menu (> 20)
Show Top menu (> 20)
Show Option menu (> 26)
Colored buttons (red, green, yellow, blue)
Used for various purposes depending on the
screen
Transmit the remote control signal
Open or close the disc tray (> 9)
Change soundtrack (> 20)
Show “Video Settings” (> 27)
Show the status messages (> 20)
Show “Playback Information Window” (> 20)
Show the Home screen of the Network
Service (> 22)
Show “HDR Setting” (> 20)
Show NETFLIX screen (> 22)
Show HOME menu (> 19)
[3, 4, 2, 1] : Move the highlight for
selection
[OK] : Confirm the selection
(2;)(;1) : Frame-by-frame (> 20)
Return to previous screen
Getting started
∫ Front
5
1
1
2
3
2
Disc tray
USB port (
DC 5 V 500 mA)
This port supports USB 2.0 High Speed.
Remote control signal sensor
Distance: Within approx. 7 m (23 feet)
Angle: Approx. 20e up and down, 30e left and
right
6
3
4
4
[UB400]
Pull to flip down
the front panel.
[UB300]
There is no front
panel.
POWER LED
When the unit is turned on, the LED flashes
first, and then lights up.
If the LED keeps flashing, there may be an
error. (> 39)
Open or close the disc tray
Standby/on switch (Í/I) (> 17)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
5
6
CAUTION
Do not place objects in front of the unit. The disc tray may collide with objects when it is opened, and
this may cause malfunction.
≥ When inserting a media item, ensure that it is facing the correct way, which is the right side facing up.
≥ If you connect a Panasonic product with a USB connection cable, the setup screen may be displayed on the connected
equipment. For details, refer to the instructions for the connected equipment.
∫ Rear
[UB300]
5
1
2
3
4
5
6
1
2
3
AC IN ( ) terminal (> 10)
Cooling fan
[UB400] HDMI AUDIO OUT terminal (> 11)
[UB400] HDMI VIDEO OUT terminal (> 10)
[UB300] HDMI AV OUT terminal (> 10)
LAN port (> 16)
4
7
8
6
7
8
USB port (HDD) (
DC 5 V 900 mA)
This port supports USB 3.0 Super-Speed.
[UB400] DIGITAL AUDIO OUT terminal
(OPTICAL terminal) (> 12)
Class II equipment (The construction of the product is
double-insulated.)
-9-
Getting started
Connecting to a TV
4K images can be played back when this unit is connected to 4K compatible TV.
≥ Before making any connections, please disconnect all the units from AC power.
(Connect the AC power supply cord after making all connections.)
≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
≥ This unit consumes a small amount of AC power (> 40) even when turned off in standby mode. For
the purpose of energy conservation, the unit should be disconnected if you will not be using it for
extended period of time.
∫ Enjoying 4K output
≥ To enjoy images in 4K/60p, you need an HDMI cable that supports 18 Gbps.
When outputting 1080p or 24p (4K) signal, please use HDMI cables 5.0 meters (16.4 ft.) or less.
It is recommended that you use Panasonic’s HDMI cable.
≥ If you connect this unit to a 4K-compatible TV and perform “Easy Setting”, 4K/60p will be
automatically selected. (> 17, 34)
≥ To view Ultra HD Blu-ray content in 4K/HDR format, connect to the HDMI terminal of a device that
supports HDCP2.2, 4K/60p (4:4:4), and HDR signals that meet Ultra HD Blu-ray standards.
Enjoying video and audio with a 4K-compatible TV
[UB300]
HDMI IN
To an AC outlet
AC power supply
cord (supplied)
HDMI cable
(18 Gbps)
[UB400]
Setting
Set the following items in the setup menu (> 29):
≥ Set “HDMI(VIDEO) Output Mode” to “Auto ( Video Only / Video+Audio )”. (> 29)
≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)
- 10 -
Getting started
Connecting to an amplifier/receiver
[UB400] Enjoying video with a 4K-compatible TV and audio with an amplifier
You can enjoy richer sound by using the HDMI AUDIO OUT terminal.
(Audio is output in high resolution.)
HDMI IN
HDMI IN
HDMI cable
HDMI cable
(18 Gbps)
Amplifier/receiver
Setting
Set the following items in the setup menu (> 29):
≥ Set “HDMI(VIDEO) Output Mode” to “Auto ( Video Only / Video+Audio )”. (> 29)
≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)
≥ To enjoy audio with a TV
Set “HDMI(VIDEO) Output Mode” to “Video+Audio”. (> 29)
≥ The HDMI AUDIO OUT terminal is not compatible with 4K output and the VIERA Link (> 25).
Enjoying video with a 4K-compatible TV and audio with a 4K-compatible amplifier
HDMI cable
(18 Gbps)
HDMI IN
[UB300]
HDMI OUT
(ARC)
HDMI IN
(ARC)
HDMI cable
(18 Gbps)
Amplifier/receiver
(4K-compatible)
[UB400]
Setting
Set the following items in the setup menu (> 29):
≥ Set “HDMI(VIDEO) Output Mode” to “Auto ( Video Only / Video+Audio )”. (> 29)
≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)
≥ About ARC:
When using the TV or amplifier/receiver that does not have the indication of “(ARC)” (non-ARC-compatible) on the HDMI
terminal, the amplifier/receiver and TV must also be connected using an optical digital cable or coaxial cable in order to
enjoy the TV’s sound through the amplifier/receiver.
- 11 -
Getting started
[UB400] Enjoying audio with an amplifier connected to the OPTICAL terminal
Optical digital cable
OPTICAL IN
Amplifier/receiver
Setting
Set the following items in the setup menu (> 29):
≥ Set “HDMI(VIDEO) Output Mode” to “Auto ( Video Only / Video+Audio )”. (> 29)
≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)
≥ To enjoy audio with an amplifier connected to the OPTICAL terminal.
Set “Audio Output” to “Off” in “Advanced Settings”. (> 30)
Connecting an amplifier to a 4K-compatible TV
3D or 4K images can be played back when this unit is connected to a 3D or 4K compatible TV.
≥ This connection only supports up to 5.1ch.
≥ To connect a TV and amplifier with an HDMI cable, connecting terminals on both the TV and amplifier
must be ARC-compatible. (> 11, “About ARC”)
HDMI cable
(18 Gbps)
HDMI IN
[UB300]
HDMI IN
(ARC)
HDMI OUT
(ARC)
HDMI cable
Amplifier/receiver
[UB400]
Setting
Set the following items in the setup menu (> 29):
≥ Set “HDMI(VIDEO) Output Mode” to “Auto ( Video Only / Video+Audio )”. (> 29)
≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)
- 12 -
Getting started
[UB400] Enjoying video with a 4K-compatible TV in combination with an amplifier connected to
the HDMI AUDIO OUT terminal and another amplifier connected to the OPTICAL terminal
HDMI cable
HDMI cable
(18 Gbps)
HDMI IN
HDMI IN
Optical digital cable
Amplifier/receiver
OPTICAL IN
Amplifier/receiver
Setting
Set the following items in the setup menu (> 29):
≥ Set “HDMI(VIDEO) Output Mode” to “Auto ( Video Only / Video+Audio )”. (> 29)
≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)
≥ To enjoy audio with an amplifier connected to the OPTICAL terminal.
Set “Audio Output” to “Off” in “Advanced Settings”. (> 30)
≥ To enjoy audio with a TV
Set “HDMI(VIDEO) Output Mode” to “Video+Audio”. (> 29)
≥ It is not possible to simultaneously output audio from both the amplifier connected to the HDMI AUDIO OUT terminal and the
other amplifier connected to the OPTICAL terminal.
- 13 -
Getting started
[UB400] Enjoying video with a 4K-compatible TV in combination with a 2K-compatible projector
and an amplifier that is connected to the OPTICAL terminal
HDMI cable
(18 Gbps)
HDMI cable
HDMI IN
HDMI IN
Optical digital cable
Projector
(2K-compatible)
OPTICAL IN
Amplifier/receiver
Setting
Set the following items in the setup menu (> 29):
≥ Set “HDMI(VIDEO) Output Mode” to “Auto ( Video Only / Video+Audio )”. (> 29)
≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)
≥ To enjoy audio with an amplifier connected to the OPTICAL terminal.
Set “Audio Output” to “Off” in “Advanced Settings”. (> 30)
≥ To enjoy audio with a TV
Set “HDMI(VIDEO) Output Mode” to “Video+Audio”. (> 29)
Set “Audio Output” to “On” in “Advanced Settings”. (> 30)
≥ To enjoy video with a projector
Set “HDMI(AUDIO) Output Mode” to “Video+Audio”. (> 29)
(It is not possible to output 3D, 4K or HDR content from the HDMI AUDIO OUT/HDMI VIDEO OUT
terminal when “Video+Audio” is selected.)
- 14 -
Getting started
[UB400] Enjoying video with a 4K-compatible TV in combination with a 2K-compatible projector
and an amplifier that is connected to the HDMI AUDIO OUT terminal and another amplifier that
is connected to the OPTICAL terminal
HDMI cable
HDMI OUT
HDMI cable
(18 Gbps)
HDMI IN
HDMI IN
Amplifier/receiver
OPTICAL IN
Optical digital cable
HDMI IN
Amplifier/receiver
HDMI cable
Projector
(2K-compatible)
Setting
Set the following items in the setup menu (> 29):
≥ Set “HDMI(VIDEO) Output Mode” to “Auto ( Video Only / Video+Audio )”. (> 29)
≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)
≥ To enjoy audio with an amplifier connected to the OPTICAL terminal.
Set “Audio Output” to “Off” in “Advanced Settings”. (> 30)
≥ To enjoy audio with a TV
Set “HDMI(VIDEO) Output Mode” to “Video+Audio”. (> 29)
≥ To enjoy video with a projector
Set “HDMI(AUDIO) Output Mode” to “Video+Audio”. (> 29)
(It is not possible to output 3D, 4K or HDR content from the HDMI AUDIO OUT/HDMI VIDEO OUT
terminal when “Video+Audio” is selected.)
≥ It is not possible to simultaneously output audio from both the amplifier connected to the HDMI AUDIO OUT terminal and the
other amplifier connected to the OPTICAL terminal.
- 15 -
Getting started
Connecting to the network
The following services can be used when this unit is connected to broadband.
≥ Firmware can be updated (> 18)
≥ You can enjoy BD-Live/Network Service (> 21, 22)
≥ You can access other devices (Home Network) (> 23)
≥ [UB400] This unit supports Direct Access and can make a wireless connection to wireless devices
without router. You can use this function when enjoying Home Network feature, etc. Internet access
is not available while connected via Direct Access. (> 24)
For details about connection method, refer to the instructions supplied with the connected equipment.
[UB400]
Wireless LAN connection
This unit has built-in wireless LAN and can be connected to a wireless router.
Wireless router, etc.
Internet
≥ For additional information about this unit refer to
http://www.panasonic.ca/english/support
≥ The unit is not compatible with public wireless LAN services.
≥ See page 3 for the precautions of wireless LAN connection.
LAN cable connection
LAN Cable
Broadband router, etc.
Internet
≥ Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.
≥ Inserting any cable other than a LAN cable in the LAN port can damage the unit.
- 16 -
Getting started
Settings
The following settings can be performed anytime
in the Setup menu. (> 32, 34)
Easy Setting
After connecting your new player for the first time
and pressing [Í], the basic settings screen will
appear.
Preparation
Turn on the TV and select the appropriate
video input.
1
Easy Network Setting
After completing “Easy Setting”, you can perform
“Easy Network Setting”.
Follow the on-screen instructions to establish
your connection settings.
e.g., [UB400]
Select “Wired” or “Wireless” and press [OK].
Easy Network Setting
Select a connection mode.
Press [Í].
Setup screen appears.
2
Follow the on-screen instructions to
continue with the settings.
(e.g., “Quick Start”)
≥ Certain recent models of Panasonic TVs
(VIERA) may automatically apply their
language setting to this unit.
Wired
Wireless
OK
RETURN
[UB400]
∫ About the wireless connection
∫ When connected to a
4K/60p-compatible TV
When connected to a 4K/60p-compatible TV, you
can set the video output format.
To obtain your network name (SSID*1) and
encryption key (password).
e.g.
The default settings may be
printed on the router. If the SSID
and password have been
changed, consult the person
responsible for setting up your
network.
4K60p Output
Press OK to start the connection check with your 4K TV.
Do not operate this unit during connection check.
Notice: Connection check might take up to 30 seconds and video
might appear distorted.
SSID XXXXXXXXXXXX
KEY XXXXXXXXXXXX
PIN XXXXXXXXX
For more details, refer to the
manual supplied with the wireless broadband
router, or contact your Internet provider.
Start
OK
RETURN
If your SSID is not displayed;
Search again by pressing the red button on the
remote control.
Follow the on-screen instructions to set the
format.
≥ To reconnect this unit to a 4K/60p-compatible TV after
connecting this unit to a 2K-compatible TV and completing
“Easy Setting”, set “4K60p Output” to “4K/60p(4:4:4)” or
“4K/60p(4:2:0)”. (> 29)
Wireless Settings
Select a wireless network for connection.
Press the green button to connect via
PUSH button method.
Network name (SSID)
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
Search again
PUSH button
OK
RETURN
- 17 -
Reception
Getting started
Stealth SSIDs will not be displayed; in this case,
enter manually in the following order.
1 To display the SSID input screen :
Press [HOME]
> select “Setup” and press [OK]
> select “Player Settings” and press [OK]
> select “Network” and press [OK]
> select “Network Settings” and press [OK]
> select “Wireless Settings” and press [OK]
> select “Manual setting” and press [OK]
2 Enter your SSID.
Firmware updates
This unit is capable of checking the firmware
automatically when connected to the Internet via
a broadband connection.*3
When a new firmware version is available, the
following message is displayed.
If the wireless router supports the PUSH
button method*2;
You can connect to and configure the security
settings of your wireless LAN device with ease by
pressing the Link button on the router.
If your wireless network is encrypted;
Enter your encryption key (password).
≥ You can switch between capital and lower case
letters by pressing the “Shift” key.
l
1
2
3
4
5
6
7
8
9
0
Backspace
Finish
.
Space
/
:
Symbols
OK
RETURN
~
_
-
@
*
#
;
`
“
,
Alphanumeric
RETURN
Select “Yes” to start downloading the firmware.
When the firmware update starts after the
downloading is finished, a black screen is
displayed and the POWER LED flashes rapidly.
4
Other Characters
The firmware was updated.
Current Version: x.xx
(QWHUFDVHVHQVLWLYH
≥ Refer to the owner’s manuals of the hub or router.
≥ [UB400] Do not use this unit to connect to any wireless
network for which you do not have usage rights.
Using these networks may be regarded as illegal
access.
≥ If you have trouble getting online on your PC after
performing network settings on this unit, perform the
network settings on your PC.
≥ [UB400] Please be aware that connecting to a network
without encryption may result in the leaking of data such as
personal or secret information.
*2
No
OK
After the firmware is installed, unit will restart and
the following screen will be displayed.
*1
Yes
You cannot operate the unit until the update is
complete. Don’t remove the AC power supply
cord during the update. Removing the AC power
supply cord while the update is in progress may
damage the unit.
Encryption Key (Password)
Shift
4
Firmware Update
New Version: X.XX
Current Version: X.XX
Do you want to start firmware update?
For the update information, please visit the
following website:
http://panasonic.net/support/
An SSID (Service Set IDentification) is a name used by
wireless LAN to identify a particular network. Transmission
is possible if the SSID matches for both devices.
The PUSH button method is a connection method which
allows you to set encryption for a wireless LAN connection
with ease.
You can connect to a wireless LAN network by pressing a
certain button on the wireless access point [Link button,
WPS (Wi-Fi Protected SetupTM) button, etc.].
≥ You can also download the latest firmware from the
following website and store it to a USB device to
update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
The update is complete when the POWER LED stops
rapid flashing and starts flashing in a repeating pattern of
three flashes. Turn off and on the unit. (> 39)
≥ To show the firmware version on this unit. (> 34,
“Firmware Version Information”)
≥ Downloading will require several minutes. It may take
longer or may not work properly depending on the
connection environment.
*3
*4
- 18 -
You must agree to the terms of use for the Internet function
and the privacy policy. (> 33, “Notice”)
“X.XX” represents the firmware version number.
Playback
HOME menu
Playback
Major functions of this unit can be operated from
the HOME menu.
1
Preparation
Turn on the TV and select the appropriate video
input.
2
Playback
1
2
Insert the media.
Playback starts depending on the media.
Select the item to play and press [OK].
Repeat this step if necessary.
Press [Í] to turn on the unit.
Press [OK] or [2, 1] to select the item.
≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE
DISPLAYED. Press [∫STOP] when you have finished
playback to protect the unit’s motor, your TV screen and so
on.
≥ When the following conditions are met, still pictures are
played back in 4K regardless of the image quality.
– The unit is connected to a 4K compatible TV
– “Resolution” is set to “Auto” or “4K” (> 29)
≥ This unit can not output 4K images when playing back in
3D.
≥ It is not possible to play back AVCHD and MPEG2 videos
which have been dragged and dropped or copied and
pasted to the media.
≥ To enjoy BD-Video that supports Dolby Atmos® or DTS:XTM
(> 31)
≥ Press [OK] or [3, 4] to select the item if
necessary.
Operations during playback
Videos/Music/Photos
Disc
USB
Play back the contents.
(> right)
≥ When multiple contents
are recorded, select the
types of contents or the
title.
≥ See “Playable media”
(> 6)
Home Network
Network Contents
(> 24)
Playback
[UB400]
Mirroring
Media Renderer
Some operations may not work depending on the
media and contents.
Stop
Press [∫STOP].
The stopping point is memorized.
Resume play function
Press [1PLAY] to restart from this point.
≥ The point is cleared if the media is removed.
≥ On BD-Video discs including BD-J, the
resume play function does not work.
Pause
(> 23)
Press [;PAUSE].
≥ Press [;PAUSE] again or [1PLAY] to restart
play.
(> 24)
Network Service
Displays the Home screen of Network Service.
(> 22)
Setup
Player Settings
Wallpaper
BD-Video Data
Erase
(> 29)
Changes the background
of HOME menu.
(> 21)
To show the HOME menu
Press [HOME].
≥ Items to be displayed may vary with the media.
- 19 -
Playback
Search/Slow motion
Show the status messages
Search
While playing, press [SEARCH6] or
[SEARCH5].
≥ Ultra HD Blu-ray, MKV, MP4 and MPEG2:
Audio is not heard.
Slow motion
While paused, press [SEARCH6] or
[SEARCH5].
≥ BD-Video and AVCHD: [SEARCH5] only.
≥ MKV, MP4 and MPEG2: Not effective.
While playing, press [PLAYBACK INFO.].
You can check the detailed video content* playback status.
Video attribute information of video
content*.
Audio attribute information of video
content*.
[UB400]
[UB400]
The speed increases up to 5 steps.
≥ Music, MP3, etc.: The speed is fixed to a single
step.
≥ Press [1PLAY] to revert to normal playback
speed.
Skip
[UB300]
HDMI(VIDEO) output information.
HDMI(AUDIO) output information.
HDMI output information.
Press [RETURN] to exit.
* BD-Video, DVD-Video, MKV, MP4, MPEG2 (except
Network Contents)
While playing, press [STATUS].
The status messages give you information about
what is currently being played. Each time you
press [STATUS], the display information may
change or disappear from the screen.
≥ Depending on media and contents, the display
may change or not appear.
While playing or paused, press [:] or
[9].
Skip to the title, chapter or track.
Frame-by-frame
While paused, press [2] (2;) or [1] (;1).
≥ Each press shows the next frame.
≥ Press and hold to change in succession forward
or backward.
≥ Press [1PLAY] to revert to normal playback
speed.
≥ BD-Video and AVCHD: Forward only.
≥ MKV, MP4 and MPEG2: Not effective.
e.g., Ultra HD Blu-ray
A
Play
B
T1
Changing soundtrack
D
C1
ラュンドヱヲナ
F
E
Press [AUDIO].
You can change the audio channel number or
soundtrack language, etc.
Show top menu/pop-up menu
Press [TOP MENU] or [POP-UP MENU].
Select the item and press [OK].
Adjust the screen brightness
While playing HDR video, press [HDR SETTING].
When HDR (High Dynamic Range) video is output to
a connected HDR-compatible TV, a menu is
displayed, allowing you to adjust the brightness of
the entire screen. (> 4) Press [2, 1] to adjust the
setting.
Ultra HD Blu-ray
HDR (High Dynamic Range)
A Displayed when an HDR (High Dynamic
Range) video signal is being output.
– “HDR (High Dynamic Range: HLG to PQ
Conversion)” :
The format of the HDR video is converted
from HLG to PQ
– “Dynamic Range Conversion Output” : The
video signal is converted to SDR (Standard
Dynamic Range)
B T: Title, P: Program, C: Chapter, PL: Playlist
C Elapsed time in the title
D Method of HDR (High Dynamic Range) video
E Current position
F Total time
e.g., JPEG
Press [RETURN] to exit.
- 20 -
Date
11/12/2010
Size
500 x 375
Manufacturer
Equipment
No.
Playback
Enjoying Ultra HD Blu-ray
Enjoying 3D video and photos
You can enjoy the playback of Ultra HD Blu-ray
discs with this unit.
Preparation
Connect this unit to a 3D compatible TV. (> 10)
≥ Perform the necessary preparations for the TV.
≥ Play back following the instructions displayed
on the screen.
≥ 3D Settings (> 28, 31)
Preparation
≥ For 4K/HDR viewing, connect to a device and
terminals that support HDCP2.2*1, 4K/60p
(4:4:4) and HDR signals that meet Ultra HD
Blu-ray standards. (> 10)
Due to copyright restrictions, it may not be
possible to play back certain discs unless this
unit is connected to the Internet.
≥ When connected to a device or terminal that does not
support HDCP2.2*1, this unit applies Dynamic Range
Conversion*2 to HDR signals to output them in 2K
resolution. In addition, depending on the disc, it may not be
possible to perform playback correctly.
≥ When connected to a device or terminal that supports 4K/
60p (4:2:0/8 bit) and lower, this unit plays back 60p content
by applying Dynamic Range Conversion*2 to its HDR
signals to output them.
≥ When connected to a device or terminal that does not
support 4K resolution, this unit applies Dynamic Range
Conversion*2 to HDR signals to output them in 2K
resolution.
≥ When connected to a device or terminal that does not
support HDR, this unit applies Dynamic Range
Conversion*2 to HDR signals to output them. In addition,
depending on the disc, it may not be possible to output
content in 2K resolution or perform playback correctly.
*1
*2
HDCP is a technology designed to prevent illegal copying.
“2.2” represents a version.
Dynamic Range Conversion is a function that converts
HDR video signals into video signals suited to TVs that do
not support HDR input.
≥ Please refrain from viewing 3D images if you do not feel
well or are experiencing visual fatigue.
In the event that you experience dizziness, nausea, or
other discomfort while viewing 3D images, discontinue use
and rest your eyes.
≥ 3D video might not output the way it is set in “Resolution”
and “24p Output” (> 29).
≥ When playing back 3D photos from “Photos” screen, select
from the “3D” list. (Still pictures in “2D” are played back in
2D.)
If “2D” and “3D” indications are not displayed, press the
yellow button on the remote control to switch the view of
playback contents.
Enjoying BD-Live
With “BD-Live” discs, you can enjoy bonus
contents that use Internet access.
For this BD-Live function, connection of a USB
device is necessary along with Internet
connection.
1
Perform network connection and settings.
(> 16, 17)
2
Connect a USB device with 1 GB or more
free space.
≥ The USB device is used as the local
storage.
3
Insert the disc.
∫ Deleting data on the USB device
Select “BD-Video Data Erase” in the HOME
menu (> 19) and press [OK].
≥ The usable functions and the operating method may vary
with each disc, please refer to the instructions on the disc
and/or visit their website.
≥ “BD-Live Internet Access” may need to be changed for
certain discs. (> 33)
- 21 -
Playback
Network Service
(Enjoying NETFLIX, etc.)
Slideshow
Play a slideshow of photos and adjust various
settings during the playback.
1
2
3
Insert the media.
Select “View Photos”.
Select an item and press the green button.
The following items can be set.
Network Service allows you to access some
specific websites supported by Panasonic, and
enjoy Internet contents such as photos, videos,
etc. from Network Service home screen.
≥ Some services, such as NETFLIX require a
registered account.
For details of your NETFLIX account, refer to
NETFLIX.
Start
Slideshow
Start the slideshow.
You can display still pictures in
the selected folder one by one
at a constant interval.
Display
Interval
Change the display interval.
Transition
Effect
Select the effect when sliding
pictures.
Repeat Play
Set whether to repeat the
slideshow.
* Images are for illustration purposes, contents may change
without notice.
Soundtrack
Set whether to play
background music.
≥ FLAC and MP3, etc., on the
USB device can be played
back during the slideshow of
JPEG on the USB device.
Preparation
≥ Network connection (> 16)
≥ Network setting (> 17)
Soundtrack
Folder
Select the folder from which
the music files are played.
Shuffle BGM
Background music is played in
random order.
*
MORE
BACK
– You must agree to the terms of use for the Internet
function and the privacy policy. (> 33, “Notice”)
1
Press [INTERNET].
≥ Netflix can be accessed directly by
pressing [NETFLIX] button.
2
Select the item and press [OK].
To exit from Network Service
Press [HOME].
≥ Still pictures displayed as “
” cannot be displayed as
thumbnail with this unit.
≥ You cannot play back AAC and ALAC as background
music.
- 22 -
Playback
Home Network feature
≥ In the following cases, settings are possible using the
Setup menu items.
– When restricting the use of Network Service
(> 33, “Network Service Lock”)
– When the audio is distorted
(> 33, “Audio Auto Gain Control”)
– When wrong time is displayed
(> 33, “Time Zone”, “DST”)
≥ When using a slow Internet connection, the video may not
be displayed correctly. A high speed Internet service with a
speed of at least 6 Mbps is recommended.
≥ Be sure to update the firmware as soon as a firmware
update notice is displayed on the screen. If the firmware is
not updated, you may not be able to use Network Service
function properly. (> 18)
≥ Network Service Home Screen is subject to change
without notice.
≥ The services through Network Service are operated by
their respective service providers, and service may be
discontinued either temporarily or permanently without
notice. Therefore, Panasonic will make no warranty for the
content or the continuity of the services.
≥ Some features of websites or content of the service may
not be available.
≥ Some content may be inappropriate for viewers.
≥ Some content may only be available for specific countries
and may be presented in specific languages.
Before using the following features, be sure to
configure the connected equipment on your
Home Network.
[UB400]
Using Mirroring
Mirroring is a function which displays a
smartphone or tablet’s screen on a TV via this
unit.
Enjoy the content shown on a
Miracast®-compatible smartphone or similar
device on your large TV screen.
≥ A device that supports the Mirroring function
and AndroidTM ver. 4.2 or higher is required.
For information on whether the smartphone,
etc. supports Mirroring, contact the
manufacturer of the device.
Player
1
2
3
4
Mirroring compatible
device
Press [HOME].
Select “Home Network” and press [OK].
Select “Mirroring” and press [OK].
Operate the Mirroring compatible device.
≥ On the device, enable Mirroring and select
this unit (DMP-UB400) as the device to be
connected.
For details, refer to the instructions supplied
with the device.
To exit from Mirroring
Press [HOME].
- 23 -
Playback
Playing back contents on the
Network Contents server
Using the Digital Media Controller
You can share photos, videos and music stored in
the Network Contents server*1 [PC, smartphone,
etc.] connected to your home network.
You can use a smartphone or tablet as the Digital
Media Controller (DMC) to playback contents
from Network Contents server*1 on the Renderer
(this unit).
Possible applications:
≥ About support format of Network Contents
(> 41)
Renderer
Player
1
2
3
4
5
Controller
Server
Select “Home Network” and press [OK].
Renderer
Select “Network Contents Playback” and
press [OK].
≥ The list can be updated by pressing the
green button on the remote control.
≥ The selected equipment can be deleted
from the list by pressing the red button on
the remote control.
≥ [UB400] The connection method can be
switched to Direct Access*2 by pressing the
yellow button on the remote control.
Select the item to play and press [OK].
≥ You may be able to use convenient
functions depending on the content by
pressing [OPTION].
To exit from Home Network
Press [HOME].
*3
*3
*3
Press [HOME].
Select the equipment and press [OK].
Server
1
2
3
4
Server
i
Controller
Press [HOME].
Select “Home Network” and press [OK].
Select “Media Renderer” and press [OK].
[UB400] Select “Home Network” or “Direct
Access”*2 and press [OK], then follow the
indications on the screen.
5
Operate the DMC compatible devices.
To exit from Media Renderer screen
Press [HOME].
≥ [UB400] Direct Access*2 connection while using Home
Network feature is only temporary, and the network
connection method returns to the original setting when
exiting.
≥ Depending on the device or connection environment, the
data transfer rate may decrease.
≥ Depending on the contents and the connected equipment,
playback may not be possible.
≥ Items displayed in gray on the display cannot be played
back by this unit.
*1
*2
*3
- 24 -
DLNA compatible server, etc.
Direct Access is a function which allows you to wirelessly
and directly connect wireless LAN-equipped devices to
each other without a wireless router in between. You can
connect devices such as those that support Wi-Fi Direct®.
DMC compatible software should be installed.
Playback
VIERA Link
Playing music continuously even
after turning off the TV
What is VIERA Link?
When the unit is connected to a Panasonic TV
(VIERA) that supports VIERA Link and an
amplifier/receiver supports VIERA Link.
1 While playing music
Press [OPTION].
2 Select “TV Power”.
VIERA Link is a convenient function
which will link the operations of this unit
and a Panasonic TV (VIERA) or other
device under “VIERA Link”.
You can use this function by connecting
the equipment with an HDMI cable*. See
the owner’s manuals for connected
equipment for operational details.
Easy control only with VIERA
remote control
* [UB400] Only when connecting via an HDMI VIDEO OUT
terminal on this unit.
Only when TV supports “VIERA Link”
By using the TV remote control, you can perform
various playback operations and settings.
See the owner’s manuals of the TV for more
details.
Automatic input switching
Power on link
When the following operations are performed, the
input channel of the TV will be automatically
switched and the screen of this unit will be
displayed.
If this unit is on and the TV is off, the TV
automatically turns on.
– When play starts on the unit
– When you display a menu, such as the HOME
menu or Setup menu
Power off link
When you set the TV to standby mode, this unit is
also automatically set to standby mode.
≥ If you set “VIERA Link” to “Off”, set to “On” (> 34).
(The default setting is “On”.)
≥ The buttons and functions that you can use for this unit
vary depending on the TV. For details, refer to the owner’s
manuals of the TV.
≥ The operation of this unit may be interrupted when you
press certain buttons on the TV remote control.
≥ VIERA Link, based on the control functions provided by
HDMI which is an industry standard known as HDMI CEC
(Consumer Electronics Control), is a unique function that
we have developed and added. As such, its operation with
other manufacturers’ equipment that supports HDMI CEC
cannot be guaranteed.
≥ Please refer to individual manuals for other manufacturers’
equipment supporting VIERA Link function.
- 25 -
Playback
Option menu
A variety of playback operations and settings can
be performed from this menu.
Available options differ depending on the playing
contents and the condition of the unit.
1
Press [OPTION].
e.g., BD-Video
∫ Start Slideshow
Start the slideshow.
∫ Status
Show the status messages.
∫ Rotate Right
∫ Rotate Left
Rotate the still picture.
Operation Menu
Soundtrack
∫ Shuffle
Select whether to play shuffle or not.
1 ENG DTS-HD MSTR Multi
Subtitle Settings
Angle
1
Repeat Play
Off
Secondary Video
Playback Information Window
∫ Wallpaper
Set the still picture to the wallpaper of HOME
menu. (> 19)
Control Panel
Top Menu
Pop-up Menu
≥ When playing music, select “Playback
Settings” and press [OK].
2
Select an item and change the settings.
To exit the screen
Press [OPTION].
Regarding Language : (> 42)
Operation Menu
∫ Soundtrack (> 20)
This setting is also able to switch by pressing
[AUDIO].
∫ Video
The recording method of original video appears.
∫ Secondary Video
Video
Select on/off for images. The
recording method of original
video appears.
Soundtrack
Select on/off for audio and the
language.
∫ Playback Information Window (> 20)
This setting is also displayed by pressing
[PLAYBACK INFO.].
∫ Control Panel
Display the Control Panel.
Playing back while using VIERA Link, etc.
e.g.,
∫ Audio channel
Select the audio channel number.
∫ Subtitle
∫ Subtitle Settings
Change the subtitle settings.
∫ Angle
Select the number of the angle.
∫ Repeat Play
Select the item that you want to repeat.
≥ You can repeat the playback of a chapter,
playlist, the entire disc, etc., but the items
displayed will differ depending on the type of
the media.
≥ Select “Off” to cancel.
Press [RETURN] to hide the Control Panel.
∫ Top Menu
Display Top Menu.
∫ Pop-up Menu
Display Pop-up Menu.
∫ Menu
Display Menu.
[UB400]
∫ Reception
The radio wave status during the playback of
Network Contents is displayed. (Only when a
wireless connection is used)
- 26 -
Playback
∫ Progressive
Select the method of conversion for progressive
output to suit the type of material being played.
≥ When the content is distorted, change the
settings from “Auto” to “Video”.
Video Settings
These settings are also displayed by pressing
[VIDEO SETTING].
Video Settings
∫ Reset to Default Video Settings
Return “Video Settings” of the selected tab
(“Set 1” or “Set 2”) to the factory preset.
Set 1
Display
Normal
Picture Type
Normal
Sharpness Adjustment
entt
Noise Reduction
During BD-Video playback,
these icons switch to the ones
for BD Video content.
Luminance/Color Adjustment
justment
Bandwidth Limitationn
Progressive
Reset to Default Video
eo
o Settings
Audio Settings
Set 1
Switch “Set 1”, “Set 2” or “Standard” by using
[2, 1].
≥ You can register desired settings to “Set 1” and
“Set 2”. Settings for BD Video playback and
settings for the playback of other types of media
are registered separately.
(The default settings for “Set 1”/“Set 2” are the
same as the settings for “Standard”.)
≥ You cannot change the “Standard” settings.
∫ Display
Select a setting suitable for your screen.
∫ Sound Effects*1, *2
Select the sound effect.
≥ Night Surround :
Enjoy a movie with powerful sound even when
the volume is kept low at night. The audio is set
in such a way that it can be heard easily.
[UB400]
≥ Remaster :
This feature gives you brighter sound by
increasing the high frequency portion of the
audio.
(Upsampling up to 192 kHz/32 bit is possible.)
Recommended setting
∫ Picture Type
Select the picture quality mode during play.
∫ Sharpness Adjustment
Adjust the sharpness of images. The greater the
value is, the sharper images will be.
∫ Noise Reduction
Reduce unnecessary noise in videos. The greater the value is, the less noise will appear.
∫ Luminance/Color Adjustment
Adjust the contrast, brightness, tone curve (white/
black), color saturation and hue.
Remaster 1
Pop and rock
Remaster 2
Jazz
Remaster 3
Classical
[UB400]
≥ Digital Tube Sound :
This feature gives you a warm sound, like that
produced by a vacuum tube amplifier.
(Upsampling up to 192 kHz/32 bit is possible.)
Recommended setting
∫ Bandwidth Limitation
Adjust the bandwidth limitations.
∫ Dynamic Range Adjustment (HDR Setting)
Set the brightness of the entire screen when
outputting HDR (High Dynamic Range) video to a
connected HDR-compatible TV.
∫ Dynamic Range Conversion Adjustment
When this unit is connected to a TV that does not
support HDR (High Dynamic Range) input, HDR
video is output converting to a SDR (Standard
Dynamic Range) video signal. If you set a smaller
value, their contrast will be reproduced more
faithfully, but the entire screen will appear darker.
To increase the brightness, set a larger value.
- 27 -
Digital Tube
Sound 1
A crisp, delicate sound
Digital Tube
Sound 2
A tight, hi-fi sound
Digital Tube
Sound 3
A soft, rich sound
Digital Tube
Sound 4
A clear, powerful sound
Digital Tube
Sound 5
A distinctive mid-range
sound
Digital Tube
Sound 6
A soft, enveloping sound
Playback
[UB400]
∫ Sound Effect Frequency
Set the maximum sampling frequency for the
audio selected in “Sound Effects”.
≥ Even when “96/88.2kHz” is selected, an audio
source with a sampling frequency of 96 kHz or
higher will be output with the original sampling
frequency.
≥ When “Sound Effects” is set to “Off”, this setting
is disabled.
3D Settings
∫ Signal Format
Original
Keep original picture format.
Side by side
3D picture format comprising
of left and right screens.
∫ Pop-Out Level
3D position for the Option menu or message
screen, etc. can be adjusted during 3D playback.
∫ DSD Decode Sampling Frequency
Select the settings that suit your sound quality
preferences.
∫ DSD LPF Setting
Select the settings that suit your sound quality
preferences.
∫ Dialog Enhancer*2
The volume of the center channel is raised to
make dialog easier to hear.
[UB400]
∫ High Clarity Sound
Stop processing signals that affect the audio
quality to make the audio quality clearer. (> 31)
Select whether or not to output images.
This setting is able to switch by pressing green
button on the remote control during music
playback.
≥ If “On (Video Off)” is selected, the setting will be
canceled after you play back a video.
*1
*2
Not every function can be set individually.
This function is effective for audio from HDMI OUT or
DIGITAL AUDIO OUT only when “Digital Audio Output” is
set to “PCM” (> 30).
- 28 -
Reference
Setup menu
∫ 4K60p Output
This unit automatically chooses to output images
in 4K*1 60p when connected to a 4K/60p
compatible TV.
≥ This item is available only when “Resolution” is
set to “Auto” and “4K”.
≥ [UB400] This item is not available when
“HDMI(AUDIO) Output Mode” is set to
“Video+Audio”.
≥ To connect to a TV that supports 4K/60p (4:4:4/
8 bit) or 4K/60p (4:2:2/12 bit), select “4K/
60p(4:4:4)”.
Images will not be output correctly with an
HDMI cable that does not support 18 Gbps.
≥ To connect to a TV that supports 4K/60p (4:2:0/
8 bit), select “4K/60p(4:2:0)”.
Reference
Change the unit’s settings if necessary. The
settings remain intact even if you switch the unit
to standby.
1
Press [HOME].
2
Select “Setup”.
3
Select “Player Settings”.
[UB400]
Player Settings
Resolution
HDMI
4K60p Output
Auto
Off
Video
24p Output
Auto
Audio
HDMI(VIDEO) Output Mode
Auto
HDMI(AUDIO) Output Mode
Audio Only
3D
Advanced Settings
Language
Network
Ratings
System
OK
RETURN
4
Select an item and change the settings.
To exit the screen
Press [HOME].
HDMI
∫ Resolution
The items supported by the connected devices
are indicated on the screen as “¢”. When any
item without “¢” is selected, the images may be
distorted.
≥ If “Auto” is selected, the best suited output
resolution to the connected TV is automatically
selected.
∫ 24p Output
Content recorded at 24p*2, such as BD-Video
films, is output at 24p when played back.
≥ When this unit is connected to TV compatible
with 4K/24p and “Resolution” is set to “Auto” or
“4K”, images will be output in 4K/24p.
≥ When this unit is connected to a TV compatible
with 1080/24p and “Resolution” is set to “Auto”,
“1080i” or “1080p”, images will be output in
1080/24p.
≥ If images output in 24p are distorted, change
the setting to “Off”.
[UB400]
∫ HDMI(VIDEO) Output Mode
Set whether or not to output audio from the HDMI
VIDEO OUT terminal.
≥ When an amplifier is connected to the HDMI
AUDIO OUT terminal and this menu item is set
to “Auto ( Video Only / Video+Audio )”, the TV
may not output audio. In that case, select
“Video+Audio”.
[UB400]
∫ HDMI(AUDIO) Output Mode
Set whether or not to output images from the
HDMI AUDIO OUT terminal.
≥ It is not possible to output 3D, 4K or HDR
content from the HDMI AUDIO OUT/HDMI
VIDEO OUT terminal when “Video+Audio” is
selected.
- 29 -
Reference
∫ Advanced Settings
Press [OK] to show the following settings:
Video
∫ Still Mode ( paused video )
¾Color Mode
This setting is for selecting color-space
conversion of the image signal.
Select the type of picture shown when you pause
playback.
¾Deep Color Output
Set the output method to be used when this unit is
connected to a TV that supports Deep Color.
¾HDR (High Dynamic Range) Output
Output images in HDR (High Dynamic Range) format
depending on the content and connected device.
¾HLG / PQ Conversion
Set whether or not to convert HDR (High Dynamic
Range) videos in HLG format to PQ format before
outputting them when this unit is connected to a
TV that supports only HDR (PQ) format.
≥ When “HDR (High Dynamic Range) Output”
is set to “Off”, this setting is disabled.
¾Contents Type Flag
Depending on the playback content, the TV will
output adjusting to the optimal method when a
TV that supports this function is connected.
[UB400]
¾Audio Output
This setting selects whether or not to output
audio from HDMI.
≥ To enjoy audio with the HDMI terminal, select
“On”. To enjoy audio with the OPTICAL
terminal, select “Off”. Audio will not be output
from the HDMI terminal regardless of the
settings for “HDMI(VIDEO) Output Mode” and
“HDMI(AUDIO) Output Mode”.
Auto
Automatically selects the type
of picture shown.
Field
Select if jittering occurs when
“Auto” is selected.
Frame
Select if small text or fine
patterns cannot be seen
clearly when “Auto” is
selected.
∫ Seamless Play
The chapter segments in playlists are played
seamlessly.
≥ Select “On” when the picture freezes for a
moment at the chapters segment in playlists.
Audio
∫ Dynamic Range Compression
You can listen at low volumes but still hear dialog
clearly.
(Dolby Digital, Dolby Digital Plus and Dolby
TrueHD only)
≥ “Auto” is effective only when playing Dolby
TrueHD.
∫ Digital Audio Output
Press [OK] to show the following settings:
[UB400]
¾7.1ch Audio Reformatting
Surround sound with 6.1ch or less is automatically
expanded and played back at 7.1ch.
≥ If “Off” is selected, sound is played over the
original number of channels. (Note that in the
case of 6.1ch audio, playback will be at 5.1ch.)
≥ Audio reformatting is enabled in the following cases:
– When you have selected “PCM” in “Digital
Audio Output”.
– When the audio is Dolby Digital, Dolby
Digital Plus, Dolby TrueHD or LPCM.
– BD-Video playback
*1
*2
A high resolution image/display technology of
approximately 4000 (width) k 2000 (height) pixels.
A progressive image recorded at a rate of 24 frames per
second (motion-picture film). Many BD-Video movie
contents are recorded in 24 frames/second in accordance
with the film materials.
- 30 -
¾ Dolby D/Dolby D +/Dolby TrueHD
¾ DTS/DTS-HD
Select the audio signal to output.
≥ Select “PCM”, when the connected
equipment cannot decode the respective
audio format. This unit decodes the audio
format and transmits to the connected
equipment.
≥ If you do not make proper settings the audio
may be static or noisy.
Reference
¾BD-Video Secondary Audio
Select whether or not to mix the primary and
secondary audio (including the button click
sound).
If “Off” is selected, the unit outputs the primary
audio only.
[UB400]
∫ HDMI Output Settings of Music Playback
Minimize the audio noise during music playback
by automatically switching the video output to
1080i.
[UB400]
∫ Settings for High Clarity Sound
≥ To enjoy BD-Video that supports Dolby Atmos® or
DTS:XTM
Connect this unit to an AV amplifier or similar device that
supports it with an HDMI cable, and select the following
settings:
– Dolby D/Dolby D +/Dolby TrueHD: “Bitstream”
– DTS/DTS-HD: “Bitstream”
– BD-Video Secondary Audio: “Off”
Set a terminal that will stop processing audio
signals when “High Clarity Sound” (> 28) is set to
“On (Video Off)” or “On (Video On)”.
≥ Set an option for video playback and audio
playback.
∫ Audio Delay
Dolby Atmos is a trademark of Dolby Laboratories.
[UB400]
∫ OPTICAL Down Sampling
Select whether or not to convert the sampling
frequency of the audio to be output from the
OPTICAL terminal.
If you choose to convert the sampling frequency,
you can limit the maximum output to 48 kHz or
96 kHz.
≥ Set a frequency supported by the connected
device.
≥ When playing back BD-Video, signals are
converted to 48 kHz despite the settings in the
following cases:
– when the signals have a sampling frequency
of 192 kHz
– when the disc has copy protection
– when “BD-Video Secondary Audio” is set to
“On”
Synchronization between picture and sound is
corrected by adjusting the delay time of the audio
output.
3D
∫ 3D BD-Video Playback
Select the playback method of 3D compatible
video software.
∫ 3D AVCHD Output
Select the output method of 3D AVCHD videos.
∫ 3D Playback Precautions
Set to display or hide the 3D viewing warning
screen when playing back the 3D compatible
video software.
∫ Downmix
Select the downmix system of multi-channel to
2-channel sound.
≥ Select “Surround encoded”, when the
connected equipment supports the virtual
surround function.
≥ The downmix effect is not available when
“Digital Audio Output” is set to “Bitstream”.
≥ The audio will be output in “Stereo” in the
following cases:
– AVCHD playback
– Playback of secondary audio (including the
button click sound).
- 31 -
Reference
Language
Network
∫ Audio Language
∫ Easy Network Setting (> 17)
Choose the language for audio.
≥ If “Original” is selected, the original language of
each disc will be selected.
≥ When the selected language is not recorded on
the disc, or depending on how the navigation is
created on the disc, it may playback in a
different language than the selected language.
≥ Enter a code (> 42) when you select “Other
¢¢¢¢”.
∫ Network Settings
Perform network-related settings individually.
Press [OK] to show the following settings:
∫ Subtitle Language
Choose the language for the subtitle.
≥ When “Auto” is selected, a subtitle for the
language selected in the “Audio Language” is
displayed only when the language other than
the language selected in the “Audio Language”
is played back.
≥ When the selected language is not recorded on
the disc, or depending on how the navigation is
created on the disc, it may playback in a
different language than the selected language.
≥ Enter a code (> 42) when you select “Other
¢¢¢¢”.
∫ Menu Language
Choose the language for the disc menus.
≥ Enter a code (> 42) when you select “Other
¢¢¢¢”.
∫ Subtitle Text
Select a desired item according to the language
used for MKV subtitles text.
≥ This item is displayed only after playing back a
file.
∫ On-screen Language
Choose the language for menus and on-screen
messages.
[UB400]
¾ LAN Connection Mode
Select the LAN connection method.
≥ When not using wireless LAN (when turning it
off), select “Wired”.
[UB400]
¾ Wireless Settings
This allows the wireless router and connection
settings to be set up. Current connection
settings and connection state can be checked.
The wireless router connection wizard will be
displayed.
Select a connection method to wireless access
point.
Search for wireless network (> 17)
PUSH button method (> 18)
PIN code method
This method allows you to set encryption for a
wireless LAN connection with ease.
You can connect to a wireless LAN network
by entering a PIN code generated by this unit
into the wireless access point you want to
connect to.
Manual setting
If a search using “Search for wireless
network” does not find the wireless access
point you want to connect to, or if you cannot
connect to a wireless LAN network with other
methods, enter an SSID manually to establish
a wireless LAN connection.
¾ IP Address/DNS Settings
This is for checking the state of the network
connection and setting the IP address and
DNS-related.
Press [OK] to show the respective setting.
¾ Proxy Server Settings
This is for checking the state of connection with
the Proxy server and performing settings.
Press [OK] to show the respective setting.
- 32 -
Reference
¾Network Service Settings (> 22)
Networked Standby
Even when “Quick Start” is set to “Off”, by
using a remote device (smartphone or tablet),
you can wake the unit from the off state and
start certain Internet content services.
≥ To activate operation from the remote
device, select “On”. But power consumption
in standby mode will increase. (> 40)
≥ Only the devices permitted by the “Remote
Device List” can be operated.
Press [OK] to show the following settings:
Audio Auto Gain Control
Volume that is different depending on the
contents is adjusted automatically to the
standard volume while using the Network
Service.
≥ Depending on contents, this function effect
will not work.
≥ Select “Off” when the audio is distorted.
¾ BD-Live Internet Access (> 21)
Time Zone
Set the unit’s time to match your location.
≥ Some Network Service contents require the
time zone to be set. Set time zone if
necessary.
You can restrict Internet access when BD-Live
functions are used.
≥ If “Allow ( Limited )” is selected, Internet
access is permitted only for BD-Live contents
which have content owner certificates.
DST
Select “On” when using Daylight Saving time.
Notice
Displays the terms of service for the cloud
services.
Ratings
The following items use the same password.
Don’t forget your password.
∫ DVD-Video Ratings
Set a ratings level to limit DVD-Video play.
¾Network Drive Connection
This unit can access a hard disk shared folder
on a network and play back videos, still
pictures, and music.
∫ BD-Video Ratings
Set an age limit of BD-Video (including Ultra HD
Blu-ray) play.
¾Remote Device Settings (> 24)
Press [OK] to show the following settings:
∫ Network Service Lock
You can restrict the usage of Network Service.
Setting Unit Name
Set the name of this unit to be displayed on
the connected equipment.
Registration Type
Auto
Allow connections to all
the equipment accessing
this unit.
Manual
Set the permission for
individual equipment
connections accessing this
unit.
Remote Device List
Registering/deregistering of the displayed
equipment can be performed when “Manual”
in “Registration Type” is selected.
≥ You can register up to 16 devices.
- 33 -
Reference
∫ Firmware Update (> 18)
System
Press [OK] to show the following settings:
∫ Easy Setting
You can execute basic settings.
¾ Automatic Update Check
When this equipment remains connected to the
Internet, it will check for the latest firmware
version when it is turned on and you can update
it if necessary.
∫ Display Settings
Press [OK] to show the following settings:
¾Screen Saver Function
This is to prevent image retention on the
screen.
≥ When this is set to “On”:
If a list of playback content is displayed and
there is no operation for 5 minutes or more,
the screen switches to HOME menu
automatically.
≥ While playing and pausing, etc., this function
is not available.
¾ Update Now
You can update the firmware manually if a
firmware update is available.
∫ System Information
Press [OK] to show the following settings:
¾ License
Information about the software used by this unit
is displayed.
¾Status Messages
¾ Firmware Version Information
Display firmware version of this unit [UB400] and wireless LAN module.
Choose whether to show status messages
automatically.
¾VIERA Link
Set to use “VIERA Link” function when
connected via HDMI cable to a device that
supports “VIERA Link”.
≥ Select “Off” when you do not want to use
“VIERA Link”.
∫ Restore Default Settings
This returns all values in the Setup menu and the
Option menu to the default settings, except for
some settings of network, ratings, remote control
code, on-screen language, etc.
∫ Quick Start
Speed of start-up from standby mode is
increased.
≥ When set to “On”, the internal control unit will be
powered. The idle power consumption will
increase so compared to when set to “Off”.
∫ Remote Control Code
Change the remote control code if other
Panasonic products react to this remote control.
- 34 -
Reference
Troubleshooting guide
General operation
Before requesting service, please perform the
following checks.
Do you have the latest firmware installed?
Panasonic is constantly improving the unit’s
firmware to ensure that our customers are
enjoying the latest technology. (> 18)
4
Make the following checks and visit our
website for more information.
www.panasonic.ca/english/support
4
Or visit our website to find a service center.
You can find a service center near you easily
on our website.
Other support information:
“Limited Warranty” (> 45)
To return to the factory default.
¾ Select “Yes” in “Restore Default Settings” in
the Setup menu. (> 34)
To return all settings to the factory preset.
¾ Reset the unit as follows:
1 While the unit is on
Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
– POWER LED starts to flash, and “00 RET”
is displayed on the screen.
2 Press [1] (right) repeatedly on the remote
control until “08 FIN” is displayed on the
screen.
3 Press and hold [OK] for more than 5 seconds.
This unit is turned off when the input for the
TV is switched.
¾ This is a normal phenomenon when using
VIERA Link. For details please read the
owner’s manuals for the TV.
The following do not indicate a problem with
this unit:
– Regular disc rotating sounds.
– Image disturbance during search.
– Image disturbance when replacing 3D discs.
∫ Unit does not respond to remote
control or unit’s buttons.
Press and hold [Í/I] on the main unit for
3 seconds.
– If still unable to turn the unit off, disconnect the
AC power supply cord, wait 1 minute, then
reconnect the AC power supply cord.
∫ Cannot eject disc.
1 While the unit is on
Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
– POWER LED starts to flash, and “00 RET”
is displayed on the screen.
2 Press [1] (right) repeatedly on the remote
control until “06 FTO” is displayed on the
screen.
3 Press [OK].
The remote control doesn’t work properly.
¾ Change the batteries in the remote control.
(> 5)
¾ The remote control and this unit are using
different codes.
Turn on this unit by using [Í/I] on the main
unit, and check “Remote Control ”, which is
displayed on the screen when you press a
button on the remote control.
Press and hold [OK] and the displayed
number (“”) for more than 5 seconds.
This unit is turned off automatically.
¾ To save on electricity, this unit is turned off
automatically depending on the media if there
is no button operation for about 20 minutes
when not playing back (such as when paused
or displaying the menu, displaying still
pictures, etc.).
- 35 -
Reference
You have forgotten your ratings password.
You want to cancel the ratings level.
¾ The ratings level returns to the factory
defaults.
1 While the unit is on
Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
– POWER LED starts to flash, and “00 RET”
is displayed on the screen.
2 Press [1] (right) repeatedly on the remote
control until “03 VL” is displayed on the
screen.
3 Press [OK].
The TV screen turns black.
¾ In the following cases, HDMI authentication
takes place and a black screen is displayed:
– When “24p Output” is set to “Auto”.
– When the display is switched between 2D
and 3D images.
– When you quit the 4K playback by
displaying another screen, including the
HOME menu.
– [UB400] When “HDMI Output Settings of
Music Playback” is set to “Sound Quality
Priority”.
This unit does not recognize the USB
connection correctly.
¾ Disconnect and re-connect the USB cable. If
it still does not recognize the connection, turn
this unit off and on again.
¾ USB devices may not be recognized by this
unit when connected using the following :
– a USB hub
– a USB extension cable
¾ If you connect USB HDD to this unit, use the
USB cable that is supplied with the HDD.
¾ If the USB HDD is not recognized, the power
to the USB HDD may not be supplied. Supply
power from an external source.
¾ If you connect a second USB device while a
screen other than the Home screen is
displayed, it will not be detected. Display the
Home screen and reconnect the USB device
you want to use.
Picture
Images from this unit do not appear on the TV
screen, or they are distorted.
¾ An incorrect resolution is selected in
“Resolution”. Reset the setting as follows:
¾ The connected devices are changed. Reset
the setting as follows:
1 While the unit is on
Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
– POWER LED starts to flash.
2 Press [8] and the blue button on the remote
control at the same time for more than
5 seconds.
– When Dolby Digital Plus, Dolby TrueHD,
and DTS-HD® audio are not output properly,
select “Yes” in “Restore Default Settings”
(> 34) and make proper settings.
– “4K60p Output” will be set to “Off”. Make
the correct setting again. (> 29)
¾ When “3D BD-Video Playback” in the Setup
menu is set to “Auto”, images may not be
output depending on the connection method.
After removing the disc from this unit, select
“Set before play” in the Setup menu, and
select “2D Playback” in the setup screen
displayed when playing 3D discs. (> 31)
¾ When outputting in 4K, images may be
distorted depending on the HDMI cable. Use
an HDMI cable that supports 18 Gbps.
- 36 -
Reference
[UB400]
Video is not output.
¾ Video is not output when the “High Clarity
Sound” is set to “On (Video Off)”. (> 28)
¾ Video from the HDMI AUDIO OUT terminal is
not output when the “HDMI(AUDIO) Output
Mode” is set to “Audio Only”. (> 29)
Video is not output in 4K or high-definition.
¾ Confirm that “Resolution” in the Setup menu
is set properly. (> 29)
¾ Confirm the HDMI cable, related connections
and the compatibility of TV video input.
To output images in 4K, connect the HDMI
cable to a 4K compatible terminal of the
connected device. (> 10)
¾ [UB400] Set “HDMI(AUDIO) Output Mode” to
“Audio Only”. (> 29)
¾ To enjoy image in 4K/60p, set “4K60p Output”
to “4K/60p(4:4:4)” or “4K/60p(4:2:0)”. (> 29)
¾ If “4K60p Output” is set to “4K/60p(4:4:4)”,
check to see if the connected HDMI cable
supports 18 Gbps. (> 10, 29)
¾ If 4K images are not output from the
connected 4K-compatible TV, set “4K60p
Output” to “4K/60p(4:4:4)” or “4K/60p(4:2:0)”.
(> 29)
Cannot output video in HDR quality even
when connected to an HDR-compatible TV.
¾ When connected to a device or terminal that
does not support HDR, this unit applies
Dynamic Range Conversion to HDR signals
to output them. In addition, depending on the
disc, it may not be possible to output content
in 2K resolution or perform playback correctly.
(> 21)
¾ Video may not be output from your TV in HDR
quality, depending on the content. Set “HDR
(High Dynamic Range) Output” and “HLG /
PQ Conversion” to “Auto”. (> 30)
3D video is not output.
¾ Connect to a 3D compatible device (e.g., TV
and amplifier/receiver).
¾ When a non-3D compatible amplifier/receiver
is connected between this unit and a TV, 3D
video is not output. (> 12)
¾ [UB400] If there is a non-3D compatible
amplifier/receiver connected to the HDMI
AUDIO OUT terminal, set the “HDMI(AUDIO)
Output Mode” to “Audio Only”. (> 29)
¾ Confirm the settings on this unit and the TV
for 3D. (> 21)
3D video is not output correctly as 2D.
¾ Select “Set before play” in the Setup menu,
and select “2D Playback” in the setup screen
displayed when playing 3D discs. (> 31, “3D
BD-Video Playback”)
¾ Discs that have recorded titles with Side by
side (2 screen structure) and that can be
enjoyed in 3D are played back in accordance
with the settings of the TV.
No subtitles.
¾ When progressive output is on, closed
captions/subtitles cannot be displayed.
The subtitles overlap closed captions
recorded on discs.
¾ Turn off the subtitles or the closed caption
setting on the TV. (> 26)
Cannot play back videos on the USB device
smoothly.
¾ Use the port on the rear side of this unit,
which supports USB 3.0.
A black band is displayed around the edge of
the screen.
The aspect ratio of the screen is abnormal.
¾ Adjust the aspect setting on the TV.
There is a lot of image lag when playing video.
¾ Set “0” all items in the “Noise Reduction”.
(> 27)
¾ Set “Audio Delay”. (> 31)
Audio
Cannot hear the desired audio.
¾ Check the connections and the “Digital Audio
Output” settings. (> 11, 30)
¾ [UB400] To output audio from a device
connected with an HDMI cable, set “Audio
Output” to “On” in the Setup menu. (> 30)
¾ [UB400] When connecting this unit to a TV via
an HDMI VIDEO OUT and to an amplifier/
receiver via an HDMI AUDIO OUT, set
“HDMI(VIDEO) Output Mode” to “Auto ( Video
Only / Video+Audio )”. (> 11, 29)
- 37 -
Reference
There is no sound coming out.
¾ [UB400] To output audio using OPTICAL
terminal, set “OPTICAL Down Sampling”
properly. (> 31)
¾ Refer to “Connecting to an amplifier/receiver”
(> 11 - 15) to check the audio output settings
suited to the connections of your device.
[UB400] In the following cases, audio is not
output from the terminals listed below:
≥HDMI VIDEO OUT terminal
– When a device is connected to the HDMI
AUDIO OUT terminal and “HDMI(VIDEO)
Output Mode” is set to “Auto ( Video Only /
Video+Audio )” (> 29)
– When “Audio Output” in “Advanced
Settings” is set to “Off” (> 30)
– While playback is being performed with
“Audio Output” in “Settings for High Clarity
Sound” set to “OPTICAL Only” (> 31)
≥HDMI AUDIO OUT terminal
– When “Audio Output” in “Advanced
Settings” is set to “Off” (> 30)
– While playback is being performed with
“Audio Output” in “Settings for High Clarity
Sound” set to “OPTICAL Only” (> 31)
≥OPTICAL terminal
– When a device is connected to the HDMI
AUDIO OUT terminal and “Audio Output” in
“Advanced Settings” is set to “On” (> 30)
– While playback is being performed with
“Audio Output” in “Settings for High Clarity
Sound” set to “HDMI Only” (> 31)
Playback
Disc cannot be played.
¾ The disc is dirty. (> 5)
¾ The disc is not finalized. (> 7)
¾ Depending on the Ultra HD Blu-ray disc, it
may not be possible to perform playback
unless this unit is connected to the Internet.
Still pictures (JPEG) do not play back
normally.
¾ The images that were edited on the PC, such
as Progressive JPEG, etc., may not be played
back.
I can’t play back BD-Live.
¾ Confirm that this unit is connected to the
broadband Internet. (> 16)
¾ Confirm the “BD-Live Internet Access”
settings. (> 33)
¾ Confirm a USB device is connected to the
USB port. (> 9)
Network
I can’t connect to the network.
¾ Confirm the network connection and settings.
(> 16, 17, 32)
¾ [UB400] There may be interference that
prevents the unit from detecting your home
network. Place the unit and the wireless
router closer to each other. This unit may be
able to detect your network name (> 18,
“SSID”).
¾ Check the owner’s manuals for each device
and connect accordingly.
- 38 -
Reference
[UB400]
When using wireless LAN connection, video
from the Network Contents server* is not
played back or video frames are dropped
during playback.
¾ Higher transfer rate router such as 802.11n
(2.4 GHz or 5 GHz) wireless router may solve
the problem. If you use 802.11n (2.4 GHz or
5 GHz) wireless router, it is necessary to set the
encryption type to “AES”.
Simultaneous use with a microwave, cordless
telephone etc. at 2.4 GHz may result in
connection interruptions or other problems.
¾ On the “Wireless Settings” screen (> 32), the
continuous lighting of at least 4 “Reception”
indicators is the target for a stable connection.
If 3 or fewer indicators are lit or the
connection is being interrupted, change the
position or angle of your wireless router and
see if the connection state improves. If there
is no improvement, connect to a wired
network and perform the “Easy Network
Setting” (> 17) again.
* DLNA compatible server, etc.
Messages on the screen
POWER LED
When the POWER LED is flashing other than
during power up or down of this unit, check the
message on the TV screen. If a message is not
displayed on the TV screen, determine the type of
the error by checking the way the POWER LED is
flashing.
Symbols indicate the following states:
Flash
No illumination
Repetition
(Flashes 6 times)
¾ The remote control and this unit are using
different codes.
Turn on this unit by using [Í/I] on the main
unit, and check “Remote Control ” which is
displayed on the screen when you press a
button on the remote control.
Press and hold [OK] and the displayed
number (“”) for at least 5 seconds.
(Flashes 4 times)
¾ The unit fails to operate properly. Press [Í/I]
on the main unit for 3 seconds to switch the
unit to standby, then switch back on.
Cannot read. Please check the disc.
¾ You inserted an incompatible disc.
Cannot play this file.
¾ You tried to play a non-compatible video.
No disc inserted.
¾ The disc may be upside down.
$ This operation cannot be performed now.
¾ Some operations are unsupported by the unit.
(For example, reverse slow motion, etc.)
IP address is not set.
¾ The “IP Address” in “IP Address/DNS
Settings” is “---. ---. ---. ---”. Set the “IP
Address”, “Subnet Mask”, and “Default
Gateway”. (Select the automatic address
acquisition if necessary.)
[UB400]
The current wireless network security setting
is weak. It is recommended to change to a
stronger security setting.
¾ Set a stronger network security level referring
to the wireless router owner’s manuals.
(Flashes)
¾ The copyright protected disc cannot be
played back.
One of the devices connected to this unit (TV,
amplifier, etc.) does not support copyright
protection.
¾ Temperature of this unit is hot and the unit
switches to standby for safety reasons.
Wait for about 30 minutes.
Install or place this unit with good ventilation.
¾ A firmware update is in progress.
(Flashes 3 times)
¾ The disc in use cannot be played back since
the copyright information is invalid.
¾ A firmware update using a USB device is
complete.
- 39 -
Reference
Specifications
File format
General
File format
Signal system
NTSC
Operating
temperature range
i5 oC to i35 oC
(i41 oF to i95 oF)
Operating humidity
range
10 % to 80 % RH
(no condensation)
[UB400]
DIGITAL AUDIO OUT
(OPTICAL)
1 pc.
Output format : PCM, Dolby
Digital, DTS®
HDMI OUT
(19 pin type A)
[UB400]
2 pcs.
[UB300]
1 pc.
Output Audio format : PCM, Dolby
Digital, Dolby Digital Plus, Dolby
TrueHD, DTS®, DTS-HD High
Resolution AudioTM, DTS-HD
Master AudioTM
USB port (Type A)
MKV
(Compression
methods
Video: H.264/HEVC
Audio: AAC, PCM,
Vorbis, FLAC)
Front : 1 pc.,
DC 5 V, Max. 500 mA
[High-Speed USB (USB 2.0)]
Rear : 1 pc.,
DC 5 V, Max. 900 mA
[Super-Speed USB (USB 3.0)]
LAN (Ethernet) Port
1 pc.
10BASE-T/100BASE-TX
[UB400]
Wireless LAN
Standard Compliance:
IEEE802.11 a/b/g/n
mp4
(Compression
methods
Video: H.264/HEVC
Audio: AAC)
MPEG
(TS/PS)
(Compression
methods
Video: MPEG2
/H.264*1/HEVC*1
Audio: AAC*1
/Dolby Digital
/LPCM*2)
Frequency Range:
2.4 GHz/5 GHz band
Security:
Encryption type: TKIP/AES,
Authentication type: PSK, WEP
(64 bit/128 bit)
LASER Specification
Class I LASER Product
Wave length: 777-800 nm (CDs)/
650-665 nm (DVDs)/400-410 nm (BDs)
Laser power: No hazardous radiation is
emitted with the safety protection
Power supply
AC 120 V, 60 Hz
Power consumption
[UB400]
Approx. 26 W
[UB300]
Approx. 25 W
Extension
“.MKV”,
“.mkv”
Power consumption in
Approx. 7 W
quick start standby mode (Quick Start: On)
Power consumption
in standby mode
Approx. 0.2 W
(Quick Start: Off, Networked Standby: Off)
Dimensions
(WkHkD)
Including the
projecting parts
[UB400]
320 mmk45 mmk199 mm
(Approx. 12 5/8zk1 13/16zk7 7/8z)
[UB300]
320 mmk45 mmk193 mm
(Approx. 12 5/8zk1 13/16zk7 5/8z)
Mass (Weight)
[UB400]
Approx. 1.5 kg (3.3 lbs)
[UB300]
Approx. 1.3 kg (2.9 lbs)
≥ Specifications are subject to change without notice.
- 40 -
Subtitles
text file
“.SRT”,
“.srt”,
“.SSA”,
“.ssa”,
“.ASS”,
“.ass”
“.MP4”,
“.mp4”,
“.MOV”,
“.mov”
“.MPG”,
“.mpg”,
“.MPEG”,
“.mpeg”,
“.M2TS”,
“.m2ts”,
“.MTS”,
“.mts”,
“.TS”,
“.ts”
Reference
≥ Resolution up to
3840x2160 30p,
4096x2160 24p.
≥ The video file and
subtitles text file are
inside the same folder,
and the file names are
the same except for the
file extensions.
≥ Some MKV files may not
be played back correctly,
depending on the video
resolution, frame rate
condition, subtitle format
and so on.
≥ MOTION JPEG is not
supported.
≥ Resolution up to
3840×2160 30p,
4096×2160 24p. (except
MPEG2)
≥ Some mp4/MPEG files
may not be played back
correctly, depending on
the video resolution,
frame rate condition and
so on.
≥ MOTION JPEG is not
supported.
≥ Depending on the audio
compression method,
only images may be
played back and it may
not be possible to output
audio.
JPEG
“.JPG”,
“.jpg”
≥ MOTION JPEG and
Progressive JPEG are
not supported.
≥ You may not be able to
play back the file if you
have edited the folder
structure or the file name
on a PC or other device.
MPO
“.MPO”,
“.mpo”
3D still picture
MP3
“.MP3”,
“.mp3”
This unit supports ID3 tags,
but only titles, artist names
and album names can be
displayed.
FLAC
“.FLAC”,
“.flac”
This unit supports tags, but
only titles, artist names and
album names can be
displayed. Maximum
sampling rate: 192 kHz/
24 bit
WAV
“.WAV”,
“.wav”
Maximum sampling rate:
192 kHz/32 bit
AAC
“.M4A”,
“.m4a”
Maximum sampling rate:
48 kHz/320 kbps
Reference
File format
*2
Reference
WMA
“.WMA”,
“.wma”
This unit supports tags, but
only titles, artist names and
album names can be
displayed. Maximum
sampling rate:
48 kHz/385 kbps
DSD
(DFF, DSF)
“.DSF”,
“.dsf”,
“.DFF”,
“.dff”
2.8 MHz (2 ch/5.1 ch),
5.6 MHz (2 ch only)
“.M4A”,
“.m4a”
96 kHz/32 bit (Max.7.1 ch),
176.4/192 kHz/32 bit
(Max.5.1 ch)
ALAC
*1
Extension
Supported format for Network
Contents Playback
When this unit works as a Network Contents
client, following contents are playable.
≥ File formats that are not supported by your
Network Contents server* cannot be played.
* DLNA compatible server, etc.
Video
Container
TS only
PS only
Video codec Audio codec
MKV
≥ With certain recording states and folder structures, the play
order may differ or playback may not be possible.
≥ A combined total of up to 10,000 files and folders can be
displayed as playable data in each folder regardless of
their format.
(Even when the picture playback menu is displayed, for
example, if a folder in the menu contains playable videos
and music files, they are also counted as playable data.)
AVCHD
MP4
Dolby Digital
.mpg, .mpeg
Linear PCM
TS
MPEG2
H.264
HEVC
AAC
Dolby Digital
Output
channel
Audio codec
MP3
FLAC
WAV
AAC
WMA
ALAC
DSD
Linear PCM
*1
*2
*3
“Digital Audio Output”
[UB400]
Dolby Digital/
DIGITAL
DTS Digital
AUDIO OUT
SurroundTM
(OPTICAL)
.m2ts, .ts
Example of file extension
.jpg
Audio
HDMI OUT/
[UB400] DIGITAL AUDIO OUT (OPTICAL)
Outputs using
original audio*2
.mts
.mp4, .mov
MPEG2
Format
JPEG
≥ The number of channels listed is the maximum possible
number of output channels when connected to amplifier/
receiver compatible with the respective audio format.
HDMI OUT
AAC
.mkv
Photo
The audio output differs depending on the
settings on the unit [UB400] and which terminals
are connected to the amplifier/receiver. (> 30,
“Digital Audio Output”)
“Bitstream”
H.264
H.264
HEVC
AAC
PCM
Vorbis
FLAC
Dolby Digital
PS
Audio information
Terminal
H.264
HEVC
Example of
file extension
“PCM”*1
BD-Video :
7.1ch PCM*2*3
DVD-Video :
5.1ch PCM
Example of file extension
.mp3
.flac
.wav
.m4a, .adts
.wma
.m4a
.dsf, .dff
—
≥ Depending on the server, the contents other than stated
above can be played back.
Down-mixed
2ch PCM
[UB300] The maximum possible number of Dolby sound is
2ch PCM.
When “BD-Video Secondary Audio” is set to “On”, the
audio will be output as Dolby Digital, DTS Digital
SurroundTM or 5.1ch PCM. However, when playing
BD-Video without secondary audio or navigation sounds,
the audio is output as the original format.
The audio output is amplified from 5.1ch or 6.1ch to 7.1ch
depending on the DTS, Inc. specifications.
- 41 -
Reference
Language code list
Language
Code Language
Abkhazian:
6566
Afar:
6565
Afrikaans:
6570
Albanian:
8381
Amharic:
6577
Arabic:
6582
Armenian:
7289
Assamese:
6583
Aymara:
6589
Azerbaijani: 6590
Bashkir:
6665
Basque:
6985
Bengali; Bangla:
6678
Bhutani:
6890
Bihari:
6672
Breton:
6682
Bulgarian:
6671
Burmese:
7789
Byelorussian: 6669
Cambodian: 7577
Catalan:
6765
Chinese:
9072
Corsican:
6779
Croatian:
7282
Czech:
6783
Danish:
6865
Dutch:
7876
English:
6978
Esperanto:
6979
Estonian:
6984
Faroese:
7079
Fiji:
7074
Finnish:
7073
French:
7082
Frisian:
7089
Galician:
7176
Georgian:
7565
German:
6869
Greek:
6976
Greenlandic: 7576
Guarani:
7178
Display languages list
Code Language
Gujarati:
7185
Hausa:
7265
Hebrew:
7387
Hindi:
7273
Hungarian:
7285
Icelandic:
7383
Indonesian: 7378
Interlingua:
7365
Irish:
7165
Italian:
7384
Japanese:
7465
Javanese:
7487
Kannada:
7578
Kashmiri:
7583
Kazakh:
7575
Kirghiz:
7589
Korean:
7579
Kurdish:
7585
Laotian:
7679
Latin:
7665
Latvian, Lettish: 7686
Lingala:
7678
Lithuanian:
7684
Macedonian: 7775
Malagasy:
7771
Malay:
7783
Malayalam: 7776
Maltese:
7784
Maori:
7773
Marathi:
7782
Moldavian:
7779
Mongolian:
7778
Nauru:
7865
Nepali:
7869
Norwegian: 7879
Oriya:
7982
Pashto, Pushto: 8083
Persian:
7065
Polish:
8076
Portuguese: 8084
Punjabi:
8065
Quechua:
8185
Code
Rhaeto-Romance:
8277
Romanian:
8279
Russian:
8285
Samoan:
8377
Sanskrit:
8365
Scots Gaelic: 7168
Serbian:
8382
Serbo-Croatian: 8372
Shona:
8378
Sindhi:
8368
Singhalese: 8373
Slovak:
8375
Slovenian:
8376
Somali:
8379
Spanish:
6983
Sundanese: 8385
Swahili:
8387
Swedish:
8386
Tagalog:
8476
Tajik:
8471
Tamil:
8465
Tatar:
8484
Telugu:
8469
Thai:
8472
Tibetan:
6679
Tigrinya:
8473
Tonga:
8479
Turkish:
8482
Turkmen:
8475
Twi:
8487
Ukrainian:
8575
Urdu:
8582
Uzbek:
8590
Vietnamese: 8673
Volapük:
8679
Welsh:
6789
Wolof:
8779
Xhosa:
8872
Yiddish:
7473
Yoruba:
8979
Zulu:
9085
Display Language Display Language Display Language
ENG
FRA
DEU
ITA
ESP
NLD
SVE
NOR
DAN
POR
RUS
- 42 -
English
French
German
Italian
Spanish
Dutch
Swedish
Norwegian
Danish
Portuguese
Russian
JPN
CHI
KOR
MAL
VIE
THA
POL
CES
SLK
HUN
FIN
Japanese
Chinese
Korean
Malay
Vietnamese
Thai
Polish
Czech
Slovak
Hungarian
Finnish
ARA
HIN
PER
IND
MRI
BUL
RUM
GRE
TUR
Arabic
Hindi
Persian
Indonesian
Maori
Bulgarian
Romanian
Greek
Turkish
Others
Reference
Licenses
“AVCHD”, “AVCHD 3D”, “AVCHD Progressive” and “AVCHD 3D/
Progressive” are trademarks of Panasonic Corporation and Sony
Corporation.
Java is a registered trademark of Oracle and/or its affiliates.
Dolby, Dolby Audio, and the double-D symbol are trademarks of
Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under
license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, &
DTS and the Symbol together are registered trademarks, and
DTS-HD Master Audio | Essential is a trademark of DTS, Inc.
© DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing, LLC in the United States and other countries.
<AVC>
This product is licensed under the AVC Patent Portfolio License for
the personal use of a consumer or other uses in which it does not
receive remuneration to (i) encode video in compliance with the
AVC Standard ("AVC Video") and/or (ii) decode AVC Video that
was encoded by a consumer engaged in a personal activity and/or
was obtained from a video provider licensed to provide AVC
Video. No license is granted or shall be implied for any other use.
Additional information may be obtained from MPEG LA, L.L.C.
See http://www.mpegla.com
<VC-1>
This product is licensed under the VC-1 Patent Portfolio License
for the personal and non-commercial use of a consumer to (i)
encode video in compliance with the VC-1 Standard ("VC-1
Video") and/or (ii) decode VC-1 Video that was encoded by a
consumer engaged in a personal and non-commercial activity
and/or was obtained from a video provider licensed to provide
VC-1 Video. No license is granted or shall be implied for any other
use. Additional information may be obtained from MPEG LA,
L.L.C.
See http://www.mpegla.com
Copyright 2004-2014 Verance Corporation. CinaviaTM is a Verance
Corporation trademark. Protected by U.S. Patent 7,369,677 and
worldwide patents issued and pending under license from Verance
Corporation. All rights reserved.
This product incorporates the following software:
(1) the software developed independently by or for Panasonic
Corporation,
(2) the software owned by third party and licensed to Panasonic
Corporation,
(3) the software licensed under the GNU General Public License,
Version 2.0 (GPL V2.0),
(4) the software licensed under the GNU LESSER General Public
License, Version 2.1 (LGPL V2.1), and/or
(5) open source software other than the software licensed under
the GPL V2.0 and/or LGPL V2.1.
The software categorized as (3) - (5) are distributed in the hope
that it will be useful, but WITHOUT ANY WARRANTY, without
even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE.
Please refer to the detailed terms and conditions thereof shown in
the Player Settings menu.
At least three (3) years from delivery of this product, Panasonic
will give to any third party who contacts us at the contact
information provided below, for a charge no more than our cost of
physically performing source code distribution, a complete
machine-readable copy of the corresponding source code covered
under GPL V2.0, LGPL V2.1 or the other licenses with the
obligation to do so, as well as the respective copyright notice
thereof.
Contact Information: oss-cd-request@gg.jp.panasonic.com
The source code and the copyright notice are also available for
free in our website below.
http://panasonic.net/avc/oss/
MPEG Layer-3 audio coding technology licensed from Fraunhofer
IIS and Thomson.
“DVD Logo” is a trademark of DVD Format/Logo Licensing
Corporation.
“Wi-Fi®”, “Miracast®”, and “Wi-Fi Direct®” are registered
trademarks of Wi-Fi Alliance®.
“Wi-Fi Protected SetupTM” and “WPATM” are trademarks of Wi-Fi
Alliance®.
Windows is a trademark or a registered trademark of Microsoft
Corporation in the United States and other countries.
Android is a trademark of Google Inc.
- 43 -
Reference
(1) MS/WMA
This product is protected by certain intellectual property rights
of Microsoft Corporation and third parties. Use or distribution of
such technology outside of this product is prohibited without a
license from Microsoft or an authorized Microsoft subsidiary
and third parties.
(2) MS/PlayReady/Final Product Labeling
This product contains technology subject to certain intellectual
property rights of Microsoft. Use or distribution of this
technology outside of this product is prohibited without the
appropriate license(s) from Microsoft.
(3) MS/PlayReady/End User Notices
Content owners use Microsoft PlayReady™ content access
technology to protect their intellectual property, including
copyrighted content. This device uses PlayReady technology
to access PlayReady-protected content and/or
WMDRM-protected content. If the device fails to properly
enforce restrictions on content usage, content owners may
require Microsoft to revoke the device’s ability to consume
PlayReady-protected content. Revocation should not affect
unprotected content or content protected by other content
access technologies. Content owners may require you to
upgrade PlayReady to access their content. If you decline an
upgrade, you will not be able to access content that requires
the upgrade.
(4) Vorbis, FLAC, [UB400] WPA Supplicant
The software licenses are displayed when “License” in the
Setup menu is selected. (> 34)
- 44 -
Reference
Limited Warranty
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC PRODUCT - LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use
and for a period as stated below from the date of original purchase agrees to, at its option either (a) repair your product
with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your
purchase price. The decision to repair, replace or refund will be made by Panasonic Canada Inc.
Panasonic BD/DVD Product - One (1) year, parts and labour
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic
brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in
Canada, which product was not sold “as is”, and which product was delivered to you in new condition in the original
packaging.
IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR
OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS
REQUIRED.
LIMITATIONS AND EXCLUSIONS
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal
wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or
failures which are caused by products not supplied by Panasonic Canada Inc., or failures which result from accidents,
misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment
of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand,
humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or
service by anyone other than an Authorized Servicer, or damage that is attributable to acts of God.
Dry cell batteries are also excluded from coverage under this warranty.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time,
travel to and from the Authorized Servicer, loss of or damage to media or images, data or other memory or recorded
content. This list of items is not exhaustive, but for illustration only.)
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages,
or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty
gives you specific legal rights and you may have other rights which vary depending on your province or territory.
WARRANTY SERVICE
For product operation, repairs and information assistance, please visit our Support page on:
www.panasonic.ca/english/support
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in the original carton.
Include details of the defect claimed, and proof of date of original purchase.
User memo:
The model number and serial number of this product can be
found on either the back or the bottom of the unit.
Please note them in the space provided below and keep for
future reference.
MODEL NUMBER
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
TELEPHONE NUMBER
SERIAL NUMBER
- 45 -
Index
A Audio
Changing audio . . . . . .20
Language . . . . . . . . . . .32
B BD-Live . . . . . . . . . . . . . .21
D DMC . . . . . . . . . . . . . . . . .24
F File format. . . . . . . . . . . .40
Firmware update . . . . . . .18
H HDR . . . . . . . . . . . . . . .4, 21
L LAN . . . . . . . . . . . . . . . . .16
Language
Audio . . . . . . . . . . . . . .32
Code list . . . . . . . . . . . .42
Menu . . . . . . . . . . . . . .32
On-screen. . . . . . . . . . .32
Soundtrack . . . . . . . . . .26
Subtitle . . . . . . . . . .26, 32
M Media Renderer . . . . . . 24
Mirroring . . . . . . . . . . . . 23
N Network
Connection . . . . . . . . . 16
Setting . . . . . . . . . 17, 32
Network Service . . . . . . .22
P Pop-up menu . . . . . . . . . .20
POWER LED. . . . . . . . .9, 39
Q Quick Start . . . . . . . . . . 34
R Repeat play . . . . . . . . . . 26
Restore Default
Settings . . . . . . . . . . . . . . .34
Resume play function . . .19
S Subtitle . . . . . . . . . . 26, 32
U Ultra HD Blu-ray . . . . . . 21
USB device. . . . . . . . . . . . . 7
V VIERA Link . . . . . . . . . . 25
W Wireless LAN . . . . . . . . 16
24p . . . . . . . . . . . . . . . . . . 29
4K . . . . . . . . . . . . . . . . 17, 29
(Inside of product)
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario,
L4W 2T3
www.panasonic.com
C Panasonic Corporation 2017
p
TQBS0106
F0417SK0
Download PDF
Similar pages