AS-i Slave Simulator, PCI Board
AS-i Slave Simulator for PCs with PCI slots
Increased functionality:
• Simulation of 62 slaves with selectable profiles
• Simulation of 31 safety slaves with selectable code sequences
• Support of most common AS-i profiles
• Possibility to operate "simulated" and "real" slaves at the same time
• Graphical user interface
• Serial interface for firmware updates
• Inputs and outputs can be linked at will
• Monitoring inputs and setting outputs possible
Art. No. BW2550: AS-i Slave Simulator, PCI Board
The AS-i slaves are simulated at connections AS-i 1.
Art. No.
Connections AS-i 2 are disabled.
BW2550
General data
Device type
PCI board
Software requirements
Windows XP or higher
Serial interface for firmware updates
yes
Interface
PCI bus interface
32 Bit PCI bus interface, 3,3V / 5V
galvanic isolation to AS-i
Serial interface
RS 232
Power supply
3,3V / 5V DC and AS-i voltage
Max. current consumption
approx. 300mA (out of 5V power supply)
approx. 100mA (out of 3,3V power supply)
approx. 70mA (out of AS-i)
AS-i
AS-i specification
3.0
Voltage
18 ... 31,6V
Environment
Applied standards
EN 61000-6-2
EN 61000-6-4
Operating temperature
0°C ... +55°C
Storage temperature
-25°C ... +70°C
Voltage of insulation
≥ 500V
RS232
Connections
+ AS-i1 -
+ PWR1 -
+ AS-i2 -
nc
+ PWR2 -
nc
Accessories:
• AS-i Power Supply 4A (Art. No. BW1649)
Bihl+Wiedemann GmbH · Floßwörthstr. 41 · D-68199 Mannheim · Phone: (+49) 621/33996-0 · Fax: (+49) 621/3392239 · eMail: mail@bihl-wiedemann.de
www.bihl-wiedemann.de
We reserve the right to change any data
Mannheim, 24.1.14
page 1
Download PDF
Similar pages