HP ProLiant BL660c Gen9 Server Blade

QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Overview
HP ProLiant BL660c Gen9 Server Blade
HP ProLiant BL660c Gen9 Server Blade – Internal View
1. Four hot-plug drive bays
2. M.2 Option Connector
3. HP BLc 12W Smart Storage Battery connector
4. HP Smart Array P246br Controller with 1GB FBWC
5. iLO Management Engine
6. Mezzanine Slots (x16 PCI 3.0)
7.
8.
9.
10.
11.
12.
Micro-SD slot
FlexibleLOM adapters
Two or Four Intel® Xeon® E5-4600 v3 family processors
Thirty two DDR4 DIMM slots (8 per processor)
USB 3.0 and TPM
Embedded SATA Connectors
What's New





Flexible Controller Options
Support for 2133MHz DDR4 memory
Support for 12Gb SAS internal hard drives and 12Gb SAS storage controller offerings
4 SFF drive bays
Support for the Intel E5-4600 v3 Product Family
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 1
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Standard Features
NOTE: This document covers the HP ProLiant BL660c Gen9 server blade only. For information on HP BladeSystems c-Class
Enclosures and HP BladeSystem c-Class Interconnect and Mezzanine Components, please see the following:
HP BladeSystem c-Class Enclosures QuickSpecs:



HP BladeSystem c3000 Enclosure QuickSpecs at
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04128340
NOTE: The c3000 HP c-Class enclosures have full backwards and forwards compatibility, existing server blades are
supported in the new enclosures and any future c-Class server blades will be supported in the existing enclosures.
HP BladeSystem c7000 Enclosure QuickSpecs at
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04128339
NOTE: The c7000 HP c-Class enclosures have full backwards and forwards compatibility, existing server blades are
supported in the new enclosures and any future server blades will be supported in the existing enclosures.
HP BladeSystem c-Class Interconnect and Mezzanine Components at
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
NOTE: For optimal cooling and system performance the BL660c Gen9 Server Blade requires the c7000 enclosure to be configured
with 10 fans and the c3000 enclosure to be configured with 6 fans.
NOTE: For proper BladeSystem operation, the minimum required versions of HP Onboard Administrator and HP Virtual Connect are
required and available via the HP Service Pack for ProLiant, please see http://www.hp.com/go/spp/download.
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
Processor
E5-4600 v3 series Processors
Two or four of the
HP BL660c Gen9 Intel® Xeon® E5-4610v3 (1.7GHz/10-core/25MB/105W
following depending on
HP BL660c Gen9 Intel® Xeon® E5-4620v3 (2.0GHz/10-core/25MB/105W
Model
HP BL660c Gen9 Intel® Xeon® E5-4640v3 (1.7GHz/12-core/30MB/105W
HP BL660c Gen9 Intel® Xeon® E5-4650v3 (2.1GHz/12-core/30MB/105W
HP BL660c Gen9 Intel® Xeon® E5-4660v3 (2.1Hz/14-core/35MB/120W
HP BL660c Gen9 Intel® Xeon® E5-4669v3 (2.1GHz/18-core/45MB/135W
HP BL660c Gen9 Intel® Xeon® E5-4667v3 (2.0GHz/16-core/40MB/135W
HP BL660c Gen9 Intel® Xeon® E5-4627v3 (2.6GHz/10-core/45MB/135W
HP BL660c Gen9 Intel® Xeon® E5-4655v3 (2.9GHz/6-core/30MB/135W
NOTE: For the maximum supported memory speeds for each processor listed above, please reference the
'Memory Speed by Processor Model' table in the Memory section of the QuickSpecs.
NOTE: DDR4 speed is the maximum memory speed of the processor. Actual memory speed may depend on
the quantity and type of DIMMs installed.
NOTE: Supports 1to 4 processors. Mixing different processor models is not supported.
NOTE: For the Intel® C610 Chipset E5-4600 v3 Series, the letter preceding the model number indicates the
Product Line (E3, E5, E7); 4600x, 4 = number of CPUs in a Node, 6 is socket/segment designation, 00 =
Processor SKU, and x = L for low power SKUs.
NOTE: All processors within the server must be identical.
NOTE: The processor model as well as the memory configuration determines the maximum speed memory
can operate. Please see the see the "Memory" section later in this document.
Cache Memory
One of the following
depending on Model
45MB (1x45MB) L3 cache
NOTE: E5-4627v3 and E5-2669v3 processors
40MB (1x40MB) L3 cache
NOTE: E5-4667v3 processor
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 2
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Standard Features
35MB (1x35MB) L3 cache
NOTE: E5-4660v3 processor
30MB (1x30MB) L3 cache
NOTE: E5-4640v3, E5-4650v3, and E5-4655v3 processors
25MB (1x25MB) L3 cache
NOTE: E5-4610v3 and E5-4620v3 processors
Chipset
Intel® C610 Series Chipset
Intel® E5-4600v3 Processor Family
NOTE: For more information regarding Intel chipsets, please see the following:
http://www.intel.com/products/server/chipsets/.
Upgradeability
Upgradeable to four (4) processors
On System
Management Chipset
HP iLO (Firmware HP iLO4 2.0), 4GB NAND with 1GB USB user space configurable via UEFI and accessible via
iLO. Read and learn more in the iLO QuickSpecs.
NOTE: For more information, visit: http://www.hp.com/go/ilo
Memory Protection
Advanced ECC
Memory Online Spare Mode (Rank Spare Mode)
Memory
One of the following
depending on Model
Type
Network Controller
One of the following
depending on Model
One (1) 20Gb 2-port FlexFabric FLB, 10Gb 2-port HP FlexFabric FLB, or 10Gb 2-port Ethernet FLB
NOTE: Supports FCoE, TCP/IP offload engine, hardware-based accelerated iSCSI, iSCSI boot, and
autosensing 10Gb/1Gb Ethernet.
NOTE: Each port is autosensing the speed, and can interoperate with 1Gb HP BladeSystem c-Class
interconnect components. Both ports will operate at the same speed.
NOTE: FlexFabric capabilities require the use of an HP Virtual Connect FlexFabric or Flex10/10D module
module.
Fibre Channel over Ethernet (FCoE) is supported with HP interconnects. Learn more at:
http://www.hp.com/go/bladesystem/interconnects
HP SmartMemory
DDR4 Load Reduced (LRDIMM), or Registered (RDIMM)
Standard (Pre-configured Models)
128GB (4 x 32GB) DDR4 2133MHz RDIMMs at 1.2V
128GB (8 x 16GB) DDR4 2133MHz RDIMMs at 1.2V
64GB (4 x 16GB) DDR4 2133MHz RDIMMs at 1.2V
Maximum (LRDIMM)
2TB (32 x 64GB) up to 2133MHz at 1.2V
Maximum (RDIMM)
1TB (32 x 32GB) up to 2133MHz at 1.2V
NOTE: HP memory from previous generation servers (DDR3) is not compatible with this server. HP
SmartMemory is required to realize the memory performance improvements and enhanced functionality
listed in this document for Gen9. For additional information, please see the HP SmartMemory QuickSpecs
at:
http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04111535
NOTE: LRDIMM and RDIMM are distinct memory technologies and cannot be mixed within a server.
NOTE: Depending on the memory configuration and processor model, the memory speed may run at
2133MHz, 1866MHz, or 1600MHz. Please see Memory Population Table or the Online Memory
Configuration Tool at: http://h22195.www2.hp.com/MemoryTool/Home/Legal
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 3
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Standard Features
One (1) HP FlexFabric 10Gb 2-port 536FLB FlexibleLOM
One (1) HP FlexFabric 20Gb 2-port 650FLB FlexibleLOM
NOTE: FlexibleLOMs are not compatible with prior generation c-Class server blades
Standard iLO Network Controller:
One (1) 10/100 Mbps port for the HP iLO 4 to Onboard Administrator link. The Onboard Administrator (with
10/100/1000 Mbps) to BladeSystem link is 1Gbps
Expansion Slots
Three (3) I/O expansion mezzanine slots:
 x16 PCIe 3.0 Type A (supports Type A mezzanine cards) (expansion slot 1).
NOTE: This expansion slot supports dual-port mezzanine cards: one port is routed to interconnect
module bay 3 and the other to bay 4.
 x16 PCIe 3.0 Type B (supports Type A and Type B mezzanine cards (expansion slots 2 and 3).
NOTE: This expansion slot supports dual-port and quad-port mezzanine cards. For dual-port
cards, one port is routed to interconnect module bay 5 and the other to bay 6 (or interconnect
module bays 5 and 6 for mezz slot 3. For quad-port cards, one port is routed to interconnect
module bay 5, one to bay 6, one to bay 7, and one to bay 8.
NOTE: Four processors must be installed to have access to the second expansion slot (expansion
slot 2).
Mezzanine card options include:
 Dual-port 20Gb FlexFabric, Dual-port 10Gb FlexFabric, 10GbE options, and quad-port 1Gb
Ethernet server adapter mezzanine options for additional network ports.
 Dual-port 16Gb Fibre Channel HBA for SAN connectivity.
 QDR and FDR InfiniBand for low latency and high bandwidth server interconnectivity.
 I/O accelerator mezzanine options for high transaction rate local storage
HP Server ROM
HP ROM (read only memory) is now digitally signed using HP's Corporate Signing Service. This signature is
verified before the flash process starts, reducing accidental programming and preventing malicious efforts
to corrupt system ROM.
HP ROM provides for essential initialization and validation of hardware components before control is
passed to the customer-installed operating system. The ROM also provides the capability of booting from
various fixed media (HDD, CD-ROM) and removable media (USB), to continue operation to the operating
system.
HP ROM performs very early configuration of the video controller, to allow monitoring of initialization
progress via an attached monitor. If configuration or hardware errors are discovered during this early phase
of hardware initialization, suitable messages are now displayed on the connected monitor. Additionally,
these configuration or hardware errors are logged to the Integrated Management Log (IML) to assist in
diagnosis.
HP's ProLiant ROM is used to configure the following:
 Processor and chipset status registers
 System memory, memory map, and memory initialization
 System hardware configuration (integrated PCI devices and optional PCIe cards).
 Customer-specific BIOS configuration using the HP ROM-Based Setup Utility (RBSU).
NOTE: For further information, please refer to HP's RBSU (ROM based setup utility) user guide:
http://www.hp.com/support/rbsu
HP Server UEFI
/Legacy ROM
Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and
more secured configuration while interacting with your server at boot time. HP ProLiant Gen9 platform
defaults to UEFI and can be factory or field configured for Legacy BIOS Boot Mode.
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 4
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Standard Features
NOTE: The UEFI System Utilities function is analogous to the HP ROM-Based Setup Utility (RBSU) of legacy
BIOS. For more information, please visit http://www.hp.com/go/proliantuefi/docs
UEFI enables numerous new capabilities specific to HP ProLiant servers such as:
 Secure Boot
 Operating system specific functionality
 Support for > 2.2 TB (using GPT) boot drives
 USB 3.0 Stack
 Embedded UEFI Shell
 Mass Configuration Deployment Tool using HP RESTful API
 PXE boot support for IPv6 networks
 Boot support for option cards that only support a UEFI option ROM
NOTE: For more information please visit http://www.hp.com/go/proliant/uefi
NOTE: For UEFI Boot Mode, boot environment and OS image installations should be configured properly to
support UEFI.
NOTE: HP UEFI FIO Setting (758959-B22) can be selected to configure the system in Legacy mode in the
factory.
Storage Controller
All Preconfigured Models
One (1) HP Smart Array P246br Controller with 1GB Flash-Backed
Write Cache (FBWC) supporting RAID 0, 1, and 5.
NOTE: The HP Smart Array P246br and the HP B140i (chipset SATA).
Support four (4) small form factor (SFF) hot plug drive bays.
Maximum Internal
Storage
One of the following
depending on Model
Hot Plug SFF SAS
4.8TB
4 x 1.2TB
Hot Plug SFF SATA
8.0TB
4 x 2.0TB
Hot Plug SFF SAS SSD
6.4TB
4 x 1.6TB
Hot Plug SFF SATA SSD
7.68TB
4 x 1.92TB
NOTE: The ProLiant BL660c Gen9 server includes the HP hot plug small form factor (SFF) SmartDrive carrier
for enhanced management and reduced maintenance errors. HP drives from previous generation servers
(prior to Gen8) are not compatible with the ProLiant BL660c Gen9 drive bays.
Interfaces
Micro SDHC Slot
Industry Standard
Compliance
ACPI 2.0
Microsoft® Logo certifications
USB 3.0 Support
IPMI 2.0
Secure Digital 2.0
TPM 1.2 Support
IEEE (specific IEEE standards depending on Ethernet adapter card(s) installed)
Advanced Encryption Standard (AES)
Triple Data Encryption Standard (3DES)
SNMP
SSL 2.0
One (1) internal Micro Secure Digital High Capacity (Micro SDHC) card
slot
USB 3.0 Port
Two (2) internal USB 3.0 connectors for USB flash media drive keys
NOTE: The above options are intended for integrated hypervisor virtualization environments.
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 5
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Standard Features
DMTF Systems Management Architecture for Server Hardware Command Line Protocol (SMASH CLP)
Active Directory v1.0
PCIe 3.0
ASHRAE A3
FIPS 140-2 Level-2 certification pending
Operating Systems
and Virtualization
Software Support for
ProLiant Servers
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
VMware
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization
Software and latest listing of software drivers available for your server, please visit our Support Matrix at:
http://www.hp.com/go/ossupport and our driver download page:
http://www.hp.com/servers/BL660cGen9
Enclosures
HP offers two different c-Class server blade enclosures to meet your individual needs:
 The HP BladeSystem c7000 rack enclosure is 10U high and holds up to eight (8) ProLiant BL660c
Gen9 servers plugged vertically.
 The HP BladeSystem c3000 rack enclosure is 6U high and holds up to eight (4) HP ProLiant BL660c
Gen9 servers plugged horizontally.
Server blades, interconnect modules, power supplies, fans, and redundant Onboard Administrator modules
are all designed to fit into the c3000 and c7000 enclosures.
NOTE: For additional enclosure information, please see:
http://h18004.www1.hp.com/products/blades/components/enclosures/c-class/index.html
Graphics
Integrated Matrox G200eh video controller
 1600 x 1200 (32 bpp)
 1920 x 1200 (16 bpp)
HP iLO Management On System Management Memory
 16 MB Flash Video Memory
 256 MB DDR 3 with ECC (112 MB after ECC and video)
Form Factor
HP ProLiant BL660c Gen9 is a full-height server blade that plugs into the HP BladeSystem c3000 and c7000
enclosures.
Embedded
Management
HP Integrated Lights Out
UEFI
HP RESTful API
Intelligent Provisioning
Monitor your servers for ongoing management, service alerting, reporting
and remote management with iLO. Learn more at
http://www.hp.com/go/ilo
Configure and boot your servers securely with industry standard Unified
Extensible Firmware Interface (UEFI). Learn more at
http://www.hp.com/go/ProLiant/uefi.
RESTful API is an application programming interface. RESTful Web Service
API served by iLO’s web server.
http://www.hp.com/go/restfulapi .
Provision servers by discovering and deploying 1 to few servers with
Intelligent Provisioning. Learn more at
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 6
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Standard Features
http://www.hp.com/go/intelligentprovisioning.
Server Utilities
HP Smart Update
Optimize firmware and driver updates with HP Smart Update solutions.
Learn more at http://www.hp.com/go/smartupdate.
HP OneView Standard
HP OneView Standard can inventory, monitor, alert, and report on your G6
thru Gen9 servers, with use of the REST API and HP OneView user
interface. Annual support is optionally available. Learn more at
http://www.hp.com/go/oneview.
HP Systems Insight Manager
HP SIM allows you to monitor the health of your HP ProLiant Servers and
(HP SIM)
HP Integrity Servers, and also provides you with basic support for non-HP
servers. HP SIM also integrates with HP SUM to provide quick and
seemless firmware updates. Learn more at http://www.hp.com/go/sim.
Scripting Tool Kit and Windows Provision 1 to many servers using your own scripts to discover and deploy
PowerShell
them with HP Scripting Tool Kit for Windows and Linux or HP Scripting
Tools for Windows PowerShell. Learn more at
http://www.hp.com/go/ProLiantSTK or
http://www.hp.com/go/powershell.
HP RESTful Interface Tool
HP RESTful API tool is a scripting tool to provision servers using RESTful
API Interface to discover and deploy servers at scale. Learn more at
http://www.hp.com/go/restfulapi.
HP iLO Mobile Application
Enables the ability to access, deploy, and manage your server anytime
from anywhere from select smartphones and mobile devices. For
additional information please visit: http://www.hp.com/go/ilo/mobileapp.
HP Insight Online
HP Insight Online, available at no additional cost as part of your HP
warranty, Care Pack or contractual support agreement with HP, is a
personalized dashboard for simplified tracking of IT operations and
support information from anywhere, anytime. Learn more at
http://www.hp.com/go/insightonline/info.
Security











Availability
Power-on password
Administrator's password
Keyboard password (QuickLock)
HP iLO Management On System Management Chipset with:
o SSL encryption
o Secure Shell version 2
o Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) on
browser, CLP and XML scripting interface
o AES and RC4 encryption of video
External USB port enable/disable
Network server mode
Serial interface control
TPM (Trusted Platform Module) 1.2 option
Advanced Encryption Standard (AES)
Intel® Advanced Encryption Standard-New Instructions (AES-NI)
FIPS 140-2 Level-2 certification pending
Memory
 Advanced ECC uses single device data correction (SDDC) to detect and correct single and all multibit error that occurs within a single DRAM chip. Both x4 and x8 SDDC are supported (x8 requires
lockstep mode).
 Memory online spare mode (also known as rank spare mode) detects a rank that is degrading and
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 7
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Standard Features



switches operation to the spare rank.
Memory demand and patrol scrubbing to prevent accumulation of correctable errors and reducing
the likelihood of unplanned downtime.
Failed DIMM isolation improves the service time thus improving the overall system availability.
Address parity protection available on RDIMMs and LRDIMMs detects address bit errors to improve
service time and overall system availability.
Mezzanine options and I/O
 Support for one (2) FlexibleLOMs, providing four (4) (i.e. redundant) Ethernet ports
 Multiple mezzanine I/O expansion slots that support a wide variety of mezzanine cards each
supporting multiple data paths routed to redundant interconnect modules.
 Network Adapter Teaming (bonding) provides network fault tolerance, transmit load balancing,
and switch-assisted load balancing.
Storage
 Four (4) Small Form Factor hot-plug SAS/SATA HDD or SSD drive bays.
 Choice of the HP Smart Array P246br Controller with 1GB FBWC/HP or the HP B140i (chipset SATA).
RAID 0 and 1 support for both storage controller offerings.,
 Optional dual-port Fibre Channel mezzanine card(s) for redundant SAN connections.
Processor/Chipset
 Processor internal sensors & thermal control protection against over-temperature conditions.
 Cache parity/ECC protects cache data from accidental data corruption.
 Machine Check Architecture (MCA) detects and captures hardware errors such as system bus,
memory ECC, parity, and cache, and improves service time.
 Intel® QPI Protocol Protection allows detection of data errors using a checksum of 8-bits.
 Core Disable for FRB (fault resilient boot) allows a system to power-on despite a failing core-pair.
It uses BIST (built-in self test) results to detect a failure and disables the target core-pair upon
subsequent boot.
Server Blade Enclosure Infrastructure
 Pooled power for true N+N power redundancy through up to six (6) hot-plug, high-efficiency,
common slot enclosure-based power supplies (configuration dependent).
 Up to ten (10) enclosure-based hot-plug HP Active Cool fans that scale to meet future demands,
optimize airflow, reduce power draw, and improve acoustic performance.
 Dual grid power providing redundant rack enclosure power feeds to the server blade enclosure.
 HP Dynamic Power Saver Mode monitors the total enclosure power consumption in real time and
automatically adjusts with change in demand for improved efficiency and reliability.HP Dynamic
Power Capping safely limits power usage without impacting performance by capping peak usage
instead of average power usage, removes risk to electrical infrastructure with a fast-acting,
hardware-based capping algorithm, and reclaims more power by dynamically controlling power
limits based on workload demand.
 Up to eight interconnect modules per server blade enclosure providing four simultaneous
redundant fabrics for FlexFabric, Virtual Connect Ethernet, Fibre Channel, InfiniBand, Pass Thru
Ethernet, etc.
 Enclosure crosslinks between adjacent enclosures to provide interconnect module-to-module
connections or as Virtual Connect module stacking links.
 Optional enclosure redundant Onboard Administrator system management module.
Warranty
This product is covered by a global limited warranty and supported by HP Services and a worldwide network
of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for three years
from date of purchase. Support for software and initial setup is available for 90 days from date of purchase.
Enhancements to warranty services are available through HP Care Pack services or customized service
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 8
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Standard Features
agreements. Certain restrictions and exclusions apply. Hard drives have either a one year or three year
warranty; refer to specific hard drive QuickSpecs for details.
NOTE: Server warranty includes 3-year Parts, 3-year Labor, 3-year on-site support. Warranty repairs may
be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories:
1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when
customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy
replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR
parts at no charge. Additional information regarding worldwide limited warranty and technical support is
available at http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html.
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 9
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Optional Features
Fibre Channel Support Up to three (3) optional Fibre Channel mezzanine HBAs are supported on the HP ProLiant BL660c Gen9.
Compatible SAN
HP ProLiant BL660c Gen9 server blades are optimized for HP MSA, EVA, 3PAR and XP.
HP ProLiant BL660c Gen9 server blades are compatible with select 3rd party SANs. Please see blade
storage page for more details at
http://h18004.www1.hp.com/products/blades/components/c-class-sans.html.
HP Virtual Connect
HP Virtual Connect is an interconnect option for c-Class BladeSystem that simplifies server connectivity to
data and storage networks, and reduces costs. Unique HP Flex-10 technology makes maximum use of
network bandwidths, provide dynamic tuning and enable extreme flexibility to meet individual server and
infrastructure requirements by allocating up to 4 network connections per server port. Virtual Connect
FlexFabric modules extend those capabilities to allocate one function per port to storage connections
(FCoE).
HP OneView’s software-defined approach to infrastructure management enables central console to
administer network connections and workloads for thousands of servers, see hp.com/go/oneview
For more information on Virtual Connect Ethernet, Fibre Channel, Converged Network and management
options, see http://www.hp.com/go/virtualconnect.
Embedded
Management
iLO Advanced for
BladeSystem
HP iLO Advanced for BladeSystem licenses offer smart remote functionality
without compromise, for all HP ProLiant servers. The license includes the
full integrated remote console, virtual keyboard, video, and mouse (KVM),
multi-user collaboration, console record and replay, and GUI-based and
scripted virtual media and virtual folders. You can also activate the
enhanced security and power management functionality. Learn more about
HP iLO Advanced at http://www.hp.com/go/iloadvanced
Server Management
HP Insight Control
HP Insight Control, lets you deploy, migrate, monitor, remote control, and
optimize your IT infrastructure through a single, simple management
console. For more information, see http://www.hp.com/go/insightcontrol.
HP OneView Advanced is converged management that reduces
infrastructure complexity with automation simplicity. This modern
architecture accelerates your IT operations across servers, storage, and
network resources using software-defined approaches and automation.
Learn more at http://www.hp.com/go/oneview.
The HP Matrix Operating Environment (Matrix OE) for ProLiant and Integrity
servers is an integrated command center that helps you instantly adjust to
dynamic business demands. This advanced infrastructure management
software lets you reduce the cost of common data center tasks by up to 40
percent while keeping pace with your changing business. The HP Matrix OE
includes the automated provisioning, optimization, and recovery
management capabilities for HP CloudSystem Matrix, the ideal platform for
private cloud and Infrastructure as a Service (IaaS).
NOTE: For more information, visit: HP CloudSystem Matrix
HP Insight Cluster Management Utility is a Hyperscale management
framework that includes software for the centralized provisioning,
management and monitoring of nodes and infrastructure. Learn more
at http://www.hp.com/go/cmu.
HP OneView Advanced
HP Matrix Operating
Environment
HP Insight Cluster
Management Utility (CMU)
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 10
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Optional Features
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 11
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Optional Features
High Performance
Clusters
HP Cluster Platforms
HP HPC Interconnects
Storage Software
HP Cluster Platforms are specifically engineered, factory-integrated largescale ProLiant clusters optimized for High Performance Computing, with a
choice of servers, networks and software. Operating system options include
specially priced offerings for Red Hat Enterprise Linux and SUSE Linux
Enterprise Server, as well as Microsoft Windows HPC Server. A Cluster
Platform Configurator simplifies ordering.
http://www.hp.com/go/clusters
High Performance Computing (HPC) interconnect technologies are available
for this server as part of the HP Cluster Platform portfolio. These high-speed
InfiniBand and Gigabit interconnects are fully supported by HP when
integrated within an HP cluster. Flexible, validated solutions can be defined
with the help of configuration tools.
http://www.hp.com/techservers/clusters/ucp/index.html
Whether you need to solve a specific data protection, archiving, or storage command and control challenge,
or deliver on strategic consolidation, compliance, or continuity initiatives, look no further than HP storage
software. Our storage software helps you reduce costs, simplify storage infrastructure, protect vital assets
and respond faster to business opportunities.
Storage software that gets the job done:
 Data Protection and Recovery Software
Whether you're a large enterprise or a smaller business, HP data protection and recovery software
will cost-effectively protect you against disaster and ensure business continuity.
 Data Archive and Migration Software
HP's storage software enables you to comply with data retention and retrieval requirements,
improve application performance, and reduce costs by efficiently migrating infrequently accessed
or less valuable data to lower cost storage.
 Storage Resource Management Software (SRM)
HP's storage resource management software reduces operational costs and provides the
command and control foundation you need to efficiently manage and visualize your physical and
virtual environments.
 Data Replication Software
HP offers array-based and host-based replication software for use in disaster recovery, testing,
application development and reporting.
 Storage Device Management Software
Maximize your investment in HP storage and networking with software that enables hardwarespecific configuration, performance tuning and connectivity management.
 HP StoreVirtual VSA
HP StoreVirtual VSA allows you to create fully featured shared storage on a VMware vSphere or
Microsoft Hyper-V virtualized server. This server model starting November 2013, includes a limited
license for HP StoreVirtual VSA software with 1TB of capacity. To download the license key and
StoreVirtual VSA software, visit: http://www.hp.com/go/unlockVSA.
NOTE: You will need your server serial number in order to complete the registration form. Fully
functional, capacity-based licenses are available in 4TB, 10T and 50TB sizes. For more information
and access to the 60-day free trial, visit: http://www.hp.com/go/tryVSA
NOTE: For more information available Storage Software including QuickSpecs, please see:
http://www.hp.com/go/storage/software.
Expansion Blade
Support
Supports one (1) optional D2220sb storage or PCI expansion blade
NOTE: Expansion blade support requires the use of either the HP Dynamic Smart Array B140i or the HP
Smart Array P246br controller.
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 12
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Optional Features
NOTE: Expansion blade support requires server firmware versions from SPP 2015.04 or later
HP Insight Online
HP Insight Online is part of the HP Support Center for one stop, secure access to product and HP support
information personalized to your IT environment. Insight Online can automatically display devices remotely
monitored by HP Remote Support tools. With Insight Online's easy navigation you can efficiently track your
IT support contracts and device status from anywhere and at anytime.
http://www.hp.com/go/insightonline
Get connected to HP
To get the most from your investment in HP Servers, get connected to HP using our innovative remote
support technology which provides system health monitoring, pre-failure alert notification and more. For
details, visit http://www.hp.com/services/getconnected
Factory Express
Portfolio for Servers
and Storage
HP Factory Express offers configuration, customization, integration and deployment services for HP servers
and storage products. Customers can choose how their factory solutions are built, tested, integrated,
shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading, asset
tagging, and custom packaging. HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000
servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network
switches.
For more information on Factory Express services on your specific server model please contact your sales
representative or go to: http://www.hp.com/go/factory-express.html
HP Simple
Configurator
SCE is a guided self-service tool to help sales and non-technical people provide customers with initial
configurations in 3 to 5 minutes. You may then send the configuration on for configuration help, or use in
your existing ordering processes. If you require "custom" rack configuration or configuration for products
not available in SCE, please contact HP's Customer Business Center or an Authorized Partner for assistance.
http://www.hp.com/products/configurator
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 13
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Pre-configured Models
Service and Support
HP Technology Services for BladeSystem
HP Technology Services delivers confidence, reduces risk and helps customers realize agility and stability.
Connect to HP to help prevent problems and solve issues faster. Our support technology lets you to tap
into the knowledge of millions of devices and thousands of experts to stay informed and in control,
anywhere, any time.
Protect your business beyond warranty with HP Care Pack Services
HP Care Pack Services enable you to order the right service level, length of coverage and response time as
you purchase your new server, giving you full entitlement for the term you select.
Optimized Support
recommendation
HP Proactive Care Advanced - 24x7 coverage, three year Care Pack Service
Achieve a higher return on your product investment with the personal attention from a locally assigned
Account Support Manager who delivers recommendations designed to improve availability and
performance. Leverage your system’s ability to connect to HP for automated problem detection and rapid
critical event management to increase stability and reduce unplanned downtime. This recommendation
provides 24x7 coverage with four-hour response for hardware and two-hour callback for supported
software. Collaborative call management comes with Proactive Care Advanced or you may choose full
support from HP where we own all cases through to resolution. HP is a leading provider of support
services for most operating systems used on HP BladeSystem with long, successful partnerships with
vendors such as Microsoft, Red Hat, VMware, SUSE and others. Purchasing software support from HP
simplifies troubleshooting and shortens time to resolution with one call for hardware or software
questions.
http://h20195.www2.hp.com/V2/GetDocument.aspx?docname=4AA5-3259ENW&cc=us&lc=en
Standard Support
recommendation
HP Proactive Care - 24x7 coverage, three year Care Pack Service
This service helps prevent problems and stabilize IT by utilizing secure, real-time, predictive analytics and
proactive consultations when your products are connected to HP. It combines three years’ proactive
reporting and advice with 24x7 four hour response coverage and enhanced escalation management. It
also includes collaborative call management with two hour call back on software questions to reduce
troubleshooting on hardware and industry leading software.
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-8855ENW.pdf
Related Services
Data Center Platform Consulting Services
Choose HP Technology Services Consulting to modernize and migrate your key systems. These services
help fine tune your data center to improve security, management and efficiency across IT infrastructure,
operations, and facilities and prepare you for the new style of IT. HP understands the needs of the data
center of the future and will serve as your guide for the journey.
http://www.hp.com/services/consulting
Data Privacy Services
Protect your data through better media management. HP Data privacy services help manage and protect
sensitive data to reduce the risk of unauthorized access to private information and help meet compliance
requirements. Our retention services allow you to keep drives and other devices upon failure with
Defective Media Retention and Comprehensive Defective Material Retention, our removal services provide
convenient data sanitization and our recovery services allow you to safely retire IT assets and capture any
remaining value from the hardware.
http://www.hp.com/services/dataprivacy
Factory Express for Servers and storage
HP Factory Express offers configuration, customization, integration and deployment services for HP
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 14
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Pre-configured Models
servers and storage products. Choose how your factory solutions are built, tested, integrated, shipped
and deployed.
http://www.hp.com/go/factory-express
HP ProLiant Blade Server Hardware Installation
This easy-to-buy, easy-to-use HP Care Pack service helps ensure your new HP BladeSystem hardware is
installed smoothly, efficiently and with minimal disruption to your IT and business operations.
http://www.hp.com/services/bladesystemservices
Additional hardware Installation services for HP BladeSystem
In addition to hardware installation of your Blade server, HP offers installation and startup services for
your BladeSystem and Network infrastructure.
http://www.hp.com/services/bladesystemservices
Connect your
devices to HP
Unlock all of the benefits of your technology investment by connecting your products to HP. Achieve up
to 77% reduction in down time, near 100% diagnostic accuracy and a single consolidated view of your
environment. By connecting, you will receive 24x7monitoring, pre-failure alerts, automatic call logging,
and automatic parts dispatch. HP Proactive Care Service and HP Datacenter Care Service customers will
also benefit from proactive activities to help prevent issues and increase optimization. All of these
benefits are already available to you with your server storage and networking products, securely
connected to HP support.
Parts and Materials
HP will provide HP-supported replacement parts and materials necessary to maintain the covered
hardware product in operating condition, including parts and materials for available and recommended
engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the maximum usage
limitations as set forth in the manufacturer's operating manual, product quick-specs, or the technical
product data sheet will not be provided, repaired, or replaced as part of these services.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
replaced by HP due to malfunction.
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
NOTE: Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional options
section of this QuickSpecs.
NOTE: HP does not allow factory integration of options into pre-configured models. Any additional options purchased will be
shipped separately.
NOTE: If you desire a custom configuration please see "Configuration Information - Factory Integrated Models" section of this
QuickSpecs.
NOTE: All Pre-configured Models come populated with some hard drive blanks installed.
E5-4600 v3 series Processors
HP ProLiant BL660c
Processor(s)
Gen9 E5-4650v3
128GB-R 4P Server
Cache Memory
Blade
Memory
728349-B21
Network Controller
(4) Intel® Xeon® E5-4650 v3 (2.1GHz/12-core/30MB/9.6GT-s
QPI/105W, DDR4-2133, HT, Turbo)
30MB (1x30MB) Level 3 cache
128GB (4x 32GB) PC4-2133P-R (DDR4-2133) Load Reduced
DIMMS at 1.2V)
NOTE: Total of 32 DIMM slots.
(2) HP FlexFabric 20Gb 2-port 630FLB FlexibleLOM
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 15
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Pre-configured Models
Storage Controller
Hard Drive
Internal Storage
Optical Drive Bay
Expansion Slots
Management
Form Factor
Warranty
HP ProLiant BL660c
Gen9 E5-4620v3
128GB-R 4P Server
Blade
728350-B21
Processor(s)
Cache Memory
Memory
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive Bay
Expansion Slots
Management
Form Factor
Warranty
HP ProLiant BL660c
Gen9 E5-4610v3
64GB-R 2P Server
Blade
728351-B21
Processor(s)
Cache Memory
Memory
Network Controller
Storage Controller
HP Smart Array P246br Controller with 1GB FBWC RAID 0,1,5
None ship standard
Supports up to four (4) HP hot-plug SFF SAS/SATA/SDD drives
SAS: 8TB; SATA: 8TB; SAS SSD: 7.68TB; SATA SSD: 6.4TB
None
3 standard - Slot 1 supports Type A mezzanine Cards. Slots 2
and 3 support Type A and Type B mezzanine cards.
HP iLO Management (standard)
Optional: HP OneView or HP Insight Control
Up to four (4) full-height blades supported in the HP
BladeSystem c3000 Enclosure
Up to eight (8) full-height blades supported in HP BladeSystem
c7000 Enclosure
Server warranty includes 3-year Parts, 3-year Labor, 3-year onsite support.
(4) Intel® Xeon® E5-4620 v3 (2.0GHz/10-core/25MB/8.0GT-s
QPI/105W, DDR4-1866, HT, Turbo)
25MB (1x25MB) Level 3 cache
128GB (8x 16GB) PC4-2133P-R (DDR4-2133) Registered DIMMS
at 1.2V)
NOTE: Total of 32 DIMM slots.
(2) HP FlexFabric 10Gb 2-port 536FLB FlexibleLOM
HP Smart Array P246br Controller with 1GB FBWC RAID 0,1,5
None ship standard
Supports up to four (4) HP hot-plug SFF SAS/SATA/SDD drives
SAS: 8TB; SATA: 8TB; SAS SSD: 7.68TB; SATA SSD: 6.4TB
None
3 standard - Slot 1 supports Type A mezzanine Cards. Slots 2
and 3 support Type A and Type B mezzanine cards.
HP iLO Management (standard)
Optional: HP OneView or HP Insight Control
Up to four (4) full-height blades supported in the HP
BladeSystem c3000 Enclosure
Up to eight (8) full-height blades supported in HP BladeSystem
c7000 Enclosure
Server warranty includes 3-year Parts, 3-year Labor, 3-year onsite support.
(2) Intel® Xeon® E5-4610 v3 (1.7GHz/10-core/25MB/6.4GT-s
QPI/105W, DDR4-1600, HT, Turbo)
25MB (1x25MB) Level 3 cache
64GB (4x 16GB) PC4-2133P-R (DDR4-2133 Registered DIMMs at
1.2V)
NOTE: Total of 32 DIMM slots.
(2) HP FlexFabric 10Gb 2-port 536FLB FlexibleLOM
HP Smart ArrayP246br Controller with 1GB FBWC RAID 0,1,5
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 16
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Pre-configured Models
Hard Drive
Internal Storage
Optical Drive Bay
Expansion Slots
Management
Form Factor
Warranty
None ship standard
Supports up to four (4) HP hot-plug SFF SAS/SATA/SDD drives
SAS: 8TB; SATA: 8TB; SAS SSD: 7.68TB; SATA SSD: 6.4TB
None
3 standard - Slot 1 supports Type A mezzanine Cards. Slots 2
and 3 support Type A and Type B mezzanine cards.
HP iLO Management (standard)
Optional: HP OneView or HP Insight Control
Up to four (4) full-height blades supported in the HP
BladeSystem c3000 Enclosure
Up to eight (8) full-height blades supported in HP BladeSystem
c7000 Enclosure
Server warranty includes 3-year Parts, 3-year Labor, 3-year onsite support.
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 17
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model (configure-to-order or CTO server). To
ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on CTO product offerings and requirements.
NOTE: Configure-to-order server blades must start with a CTO Server Blade.
NOTE: FIO indicates that this option is only available as a factory installable option.
NOTE: All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives
ordered with the server.
Step 1: Base Server Blade Configuration (Select a configurable Blade)
Models
HP ProLiant BL660c Gen9 10/20GB FlexibleLOM Configure-to-Order Server
Configurable Models ship with:
Two (2) FlexibleLOM connectors providing a choice for one or two of the supported
10Gb/20Gb FlexibleLOMs (see Step 2)
Four (4) HP small form factor hot-plug SAS/SATA/ HDD or SSD hard drive bays
Three (3) x16 PCIe I/O expansion slots (one Type A, two Type A/B)
Two (2) integrated USB connector and one (1) MicroSDHC connector
One (1) TPM connector
HP iLO Management (standard)
728352-B21
Step 2: Choose Required Options (one of the following from each list unless otherwise noted)
HP Processors
NOTE: All configure-to-order processor kits (i.e. xxxxxx-L21) contain two (2) processors.
NOTE: If four processors are desired, select one xxxxxx-L21 here in Step 2 and one
xxxxxx-B21 in Step 4.
NOTE: The BL660c Gen9 supports two or four processors; one and three processor
configurations are not supported.
E5-4600 v3 series Processors
HP BL660c Gen9 Intel® Xeon® E5-4610v3 (1.7GHz/10-core/25MB/105W) FIO 2processor Kit
HP BL660c Gen9 Intel® Xeon® E5-4620v3 (2.0GHz/10-core/25MB/105W) FIO 2processor Kit
HP BL660c Gen9 Intel® Xeon® E5-4640v3 (1.9GHz/12-core/30MB/105W) FIO 2processor Kit
HP BL660c Gen9 Intel® Xeon® E5-4650v3 (2.1GHz/12-core/30MB/105W) FIO 2processor Kit
HP BL660c Gen9 Intel® Xeon® E5-4660v3 (2.1GHz/14-core/35MB/120W) FIO 2processor Kit
HP BL660c Gen9 Intel® Xeon® E5-4669v3 (2.1GHz/18-core/45MB/135W) FIO 2processor Kit
HP BL660c Gen9 Intel® Xeon® E5-4667v3 (2.0GHz/16-core/40MB/135W) FIO 2processor Kit
HP BL660c Gen9 Intel® Xeon® E5-4627v3 (2.6GHz/10-core/45MB/135W) FIO 2processor Kit
HP BL660c Gen9 Intel® Xeon® E5-4655v3 (2.9GHz/6-core/30MB/135W) FIO 2-processor
Kit
NOTE: For the maximum supported memory speeds for each processor listed above,
please reference the 'Memory Speed by Processor Model' table in the Memory section of
the QuickSpecs.
NOTE: Supports 2 or 4 processors. Mixing different processor models is not supported.
NOTE: For the Intel® C610 Chipset E5-6600 v3 Series, the letter preceding the model
number indicates the Product Line (E3, E5, E7); 4600x, 4 = number of CPUs in a Node, 6 is
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
728378-L21
728376-L21
728374-L21
728372-L21
728370-L21
728380-L21
728382-L21
728384-L21
792028-L21
Page 18
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Configuration Information - Factory Integrated Models
socket/segment designation, 00 = Processor SKU, and x = L for low power SKUs.
NOTE: All processors within the server must be identical.
HP Memory
NOTE: HP memory from previous generation servers (DDR3) is not compatible with this
server. HP SmartMemory is required to realize the memory performance improvements
and enhanced functionality listed in this document for Gen9. For additional information,
please see the HP SmartMemory QuickSpecs at:
http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04111165
NOTE: LRDIMM and RDIMM are distinct memory technologies and cannot be mixed within
a server.
NOTE: Depending on the memory configuration and processor model, the memory
speed may run at 2133MHz, 1866MHz, or 1600MHz. Please see Memory Population
Table or the Online Memory Configuration Tool at:
http://h22195.www2.hp.com/MemoryTool/Home/Legal
HP SmartMemory
Registered DIMMs (RDIMMs) - E5-4600 v3 series Processors
HP 8GB (1x8GB) Dual Rank x8 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 8GB (1x8GB) Single Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 32GB (1x32GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
Load Reduced DIMMs (LRDIMMs) - E5-4600 v3 series Processors
HP 32GB (1x32GB) Quad Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit
HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit
HP 48GB (1x16GB +1x32GB) DDR4-2133 CAS-15-15-15 Load Reduced Memory FIO Kit
HP 64GB 4Rx4 PC4-2133P-L Kit
NOTE: For additional memory rules and guidelines, see the "Memory" section later in
this document.
NOTE: For more information on ProLiant Energy Efficient Features, see:
http://www.hp.com/go/proliant-energy-efficient
HP Networking
759934-B21
726718-B21
726719-B21
728629-B21
726722-B21
726720-B21
792278-B21
726724-B21
FlexibleLOM Adapters
NOTE: The server requires one (1) FlexibleLOM that is installed in the FlexibleLOM
connectors. All FlexibleLOMs are dual port: One port is routed to interconnect module
bay 1 and the other to bay 2.
20Gb FlexibleLOM Adapters
HP FlexFabric 20Gb 2-port 630FLB FIO Adapter
HP FlexFabric 20Gb 2-port 650FLB FIO Adapter
10Gb FlexibleLOM Adapters
HP FlexFabric 10Gb 2-port 536FLB FIO Adapter
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information: http://www.hp.com/go/ProLiantNICs
700066-B21
700764-B21
766491-B21
Step 3: Choose Additional Factory Integration Options
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 19
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Configuration Information - Factory Integrated Models
HP Insight Software
HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle Single Server
FIO License
C6N36A
HP OneView Software HP OneView Advanced with HP iLO Advanced & with rights-to-use HP Insight Control
for Converged Mgmt (Server hardware required on the same purchase order)
HP OneView for Blade Server incl 3yr 24x7 Supp FIO Bundle Physical 1 Svr Lic
HP Storage Controllers HP Smart Array P246br/1GB FBWC 12Gb 4-ports Int FIO SAS Controller
HP FIO Enable Smart Array B140i Setting
NOTE: The HP Smart Array B140i Controller (chipset SATA) comes standard with the HP
BL660c Gen9 10Gb/20Gb FLB CTO Blade. If the HP Smart Array P246br controller is not
chosen, SATA cables will be provided to support SATA devices for the four internal
drives. If RAID is required when using the B140i, please choose ‘HP FIO B140i RAID
Enable Kit - BIOS Setting’ (784308-B21).
F6Q89A
749975-B21
784308-B21
Step 4: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "Core Options" and "Additional Options" section below. For additional options,
including server blade enclosures interconnect, mezzanine options and power subsystem options; please see the Core Options and
Additional sections below; or the following:



HP BladeSystem c3000 Enclosure QuickSpecs:
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname= c04128340
NOTE: The c3000 HP c-Class enclosures have full backwards and forwards compatibility, existing server blades are
supported in the new enclosures and any future server blades will be supported in the existing enclosures.
HP BladeSystem c7000 Enclosure QuickSpecs:
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04228339
NOTE: The c7000 HP c-Class enclosures have full backwards and forwards compatibility, existing server blades are
supported in the new enclosures and any future server blades will be supported in the existing enclosures.
HP BladeSystem c-Class Interconnect and Mezzanine Components:
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html and
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
NOTE: For optimal cooling and system performance the BL660c Gen9 Server Blade requires the c7000 enclosure to be configured
with 10 fans and the c3000 enclosure to be configured with 6 fans.
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 20
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Core Options
HP Networking
NOTE: A 10 Gigabit Ethernet adapter supports linking at 1Gbps or 10Gbps when
connected to an interconnect module with 10Gb Ethernet downlinks.
NOTE: A 10 Gigabit Ethernet adapter supports linking at only 1Gbps when connected to
an interconnect module with 1Gb Ethernet downlinks.
NOTE: The 10 Gigabit Ethernet adapters on each server blade connect to a 10Gb
interconnect in bays 3-6 (HP BladeSystem c7000 Enclosure) or bays 2-4 (HP BladeSystem
c3000 Enclosure).
20 Gigabit Ethernet Mezzanine Cards
HP FlexFabric 20Gb 2-port 630M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04330587
HP FlexFabric 20Gb 2-port 650M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04380277
700076-B21
700767-B21
10 Gigabit Ethernet Mezzanine Cards
HP FlexFabric 10Gb 2-port 534M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at:
http://h18000.www1.hp.com/products/quickspecs/14619_na/14619_na.html
700748-B21
1 Gigabit Ethernet Mezzanine Cards
HP Ethernet 1Gb 4-port 366M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at:
http://h18000.www1.hp.com/products/quickspecs/14335_na/14335_na.html
615729-B21
FlexibleLOM Adapters
NOTE: The server supports a maximum of two FlexibleLOMs that are installed in the
FlexibleLOM connectors.
NOTE: For a single FlexibleLOM Factory Integrated Model configuration, select the
option here in the "Step 2" HP Networking section.
NOTE: For a two FlexibleLOM Factory Integrated Model configuration, the second
FlexibleLOM is a different part number. When two FlexibleLOMs are needed you must
select the first FlexibleLOM in the "Step 2" HP Networking section and the second
FlexibleLOM from here in "Step 4" HP Networking section.
20Gb FlexibleLOM Adapters
HP FlexFabric 20Gb 2-port 630FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04330585
HP FlexFabric 20Gb 2-port 650FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04380276
10Gb FlexibleLOM Adapters
HP FlexFabric 10Gb 2-port 536FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04380266
700065-B21
700763-B21
766490-B21
HP Infiniband Mezzanine Adapters
NOTE: When an InfiniBand adapter is installed in mezzanine slot 1, only one port is active
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 21
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Core Options
(regardless of operating mode). When installed in mezzanine slot 2, both ports are
active.
NOTE: InfiniBand QDR and FDR speeds are only supported on the HP BladeSystem c7000
Enclosure. For additional information, please see the HP BladeSystem c7000 Enclosure
and InfiniBand QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12586_na/12586_na.html
http://h18000.www1.hp.com/products/quickspecs/13078_na/13078_na.html
HP InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter
NOTE: The QDR InfiniBand adapter may be installed in either mezzanine slot of the
server.
HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter
NOTE: The FDR InfiniBand adapter must be installed in mezzanine slot 1 for FDR mode
and may be installed in either mezzanine slot if operated in any other mode.
HP InfiniBand FDR 2-port 545M Adapter
HP Fibre Channel
HP Processors
HP Memory
HP LPe1605 16Gb Fibre Channel HBA for BladeSystem c-Class
NOTE: Please see QuickSpecs for technical specifications and additional information at
http://h18000.www1.hp.com/products/quickspecs/ 14742_na/ 14742_na.html
HP QMH2672 16Gb Fibre Channel Host Bus Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04126962
HP LPe1205A 8Gb Fibre Channel Host Bus Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04163733
HP QMH2572 8Gb Fibre Channel Host Bus Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04126040
E5-4600 v3 series Processors
NOTE: The BL660c Gen9 supports two or four processors; one and three processor
configurations are not supported.
HP BL660c Gen9 Intel® Xeon® E5-4610v3 (1.7GHz/10-core/25MB/105W) 2-processor Kit
HP BL660c Gen9 Intel® Xeon® E5-4620v3 (2.0GHz/10-core/25MB/105W) 2-processor Kit
HP BL660c Gen9 Intel® Xeon® E5-4640v3 (1.9GHz/12-core/30MB/105W) 2-processor Kit
HP BL660c Gen9 Intel® Xeon® E5-4650v3 (2.1GHz/12-core/30MB/105W) 2-processor Kit
HP BL660c Gen9 Intel® Xeon® E5-4660v3 (2.1GHz/14-core/35MB/120W) 2-processor Kit
HP BL660c Gen9 Intel® Xeon® E5-4669v3 (2.1GHz/18-core/45MB/135W) 2-processor Kit
HP BL660c Gen9 Intel® Xeon® E5-4667v3 (2.0GHz/16-core/40MB/135W) 2-processor Kit
HP BL660c Gen9 Intel® Xeon® E5-4627v3 (2.6GHz/10-core/45MB/135W) 2-processor Kit
HP BL660c Gen9 Intel® Xeon® E5-4655v3 (2.9GHz/6-core/30MB/135W) 2-processor Kit
NOTE: For the maximum supported memory speeds for each processor listed above,
please reference the 'Memory Speed by Processor Model' table in the Memory section of
the QuickSpecs.
NOTE: Supports 2 or 4 processors. Mixing different processor models is not supported.
NOTE: For the Intel® C610 Chipset E5-6600 v3 Series, the letter preceding the model
number indicates the Product Line (E3, E5, E7); 4600x, 4 = number of CPUs in a Node, 6 is
socket/segment designation, 00 = Processor SKU, and x = L for low power SKUs.
NOTE: All processors within the server must be identical.
764282-B21
764283-B21
702213-B21
718203-B21
710608-B21
659818-B21
651281-B21
728378-B21
728376-B21
728374-B21
728372-B21
728370-B21
728380-B21
728382-B21
728384-B21
792028-B21
NOTE: HP memory from previous generation servers (DDR3) is not compatible with this
server. HP SmartMemory is required to realize the memory performance improvements
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 22
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Core Options
and enhanced functionality listed in this document for Gen9. For additional information,
please see the HP SmartMemory QuickSpecs at:
http://www8.hp.com/h20195/v2/GetHTML.aspx?docname= c04111165
NOTE: LRDIMM and RDIMM are distinct memory technologies and cannot be mixed within
a server.
NOTE: Depending on the memory configuration and processor model, the memory speed
may run at 2133MHz, 1866MHz, or 1600MHz. Please see Memory Population Table or the
Online Memory Configuration Tool at:
http://h22195.www2.hp.com/MemoryTool/Home/Legal
HP SmartMemory
Registered DIMMs (RDIMMs) - E5-4600 v3 series Processors
HP 8GB (1x8GB) Dual Rank x8 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 8GB (1x8GB) Single Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
Load Reduced DIMMs (LRDIMMs) - E5-4600 v3 series Processors
HP 64GB (1x 64GB) Quad Rank x4 DDR4-2133 CAS 15-15-15 Load Reduced Memory Kit
HP 32GB (1x32GB) Quad Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit
HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit
HP 48GB (1x16GB +1x32GB) DDR4-2133 CAS-15-15-15 Load Reduced Memory FIO Kit
HP 64GB 4Rx4 PC4-2133P-L Kit
NOTE: For additional memory rules and guidelines, see the "Memory" section later in this
document.
NOTE: For more information on ProLiant Energy Efficient Features, see:
http://www.hp.com/go/proliant-energy-efficient
HP Hard Drives
759934-B21
726718-B21
726719-B21
726724-B21
726722-B21
726720-B21
792278-B21
726724-B21
NOTE: The ProLiant BL660c Gen9 server includes the HP hot-plug small form factor (SFF)
SmartDrive carrier for enhanced management and reduced maintenance errors. HP
drives from generation G7 servers and before are not compatible with the BL660c Gen9
drive bays.
NOTE: The mixing of standard SAS drives with SAS SSD is supported within the server, but
limits the RAID configuration to two separate RAID 0 volumes. Mixing of other drives
types is not supported.
NOTE: HP hard drives have either a one year or three year warranty; refer to the specific
hard drive QuickSpecs for details.
NOTE: The hard drive options are not required when configuring a drive-less model.
Solid State M.2 SATA Drives
HP Dual 64GB Value Endurance Solid State M.2 Enablement Kit for ProLiant Blades
HP 64GB Value Endurance Solid State M.2 Enablement Kit for ProLiant Blades
6G SATA LE Hot Plug SFF (2.5-inch) SC EL G1 Solid State Drives
HP 960GB 6G SATA Light Endurance SFF 2.5-in SC Enterprise Light 3yr Wty G1 Solid State
Drive
SATA Hot Plug with SmartDrive SFF (2.5-inch) Midline (MDL) Drives
HP 2TB 6G SATA 7.2K rpm SFF (2.5-inch) SC 512e 1yr Warranty Hard Drive
HP 1TB 6G SATA 7.2K rpm SFF (2.5-inch) SC 512e 1yr Warranty Hard Drive
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
775588-B21
785233-B21
756601-B21
765455-B21
765453-B21
Page 23
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Core Options
HP 1TB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
HP 500GB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
NOTE: Please see the QuickSpecs for technical specifications and additional information
at
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04111725.
SAS Hot Plug with SmartDrive SFF (2.5-inch) Enterprise Drives
HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) SC Dual Port Enterprise 3yr Warranty Hard Drive
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 300GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
SAS Hot Plug SmartDrive SFF (2.5-inch) Midline Drives
HP 2TB 12G SAS 7.2K rpm SFF (2.5-inch) SC 512e 1yr Warranty Hard Drive
HP 1TB 12G SAS 7.2K rpm SFF (2.5-inch) SC 512e 1yr Warranty Hard Drive
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
NOTE: Please see QuickSpecs for technical specifications and additional information at
http://h18000.www1.hp.com/products/quickspecs/12244_na/12244_na.html.
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Value Solid State Drives
HP 1.6TB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State
Drive
HP 480GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State
Drive
HP 300GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State
Drive
6G SATA Value Endurance SFF (2.5-inch) SC Enterprise Value M1 Solid State Drives
HP 120GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty M1 Solid
State Drive
HP 240GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty M1 Solid
State Drive
HP 480GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty M1 Solid
State Drive
HP 800GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty M1 Solid
State Drive
6G SATA 2.5in WI-PLP SC SSD
HP 1.2TB 6Gb SATA 2.5in WI-PLP SC SSD
HP 800GB 6Gb SATA 2.5in WI-PLP SC SSD
HP 400GB 6Gb SATA 2.5in WI-PLP SC SSD
HP 200GB 6Gb SATA 2.5in WI-PLP SC SSD
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
655710-B21
655708-B21
718162-B21
652589-B21
652583-B21
652572-B21
652564-B21
652611-B21
652605-B21
765466-B21
765464-B21
652749-B21
652745-B21
757339-B21
717971-B21
739888-B21
764923-B21
764925-B21
764927-B21
764929-B21
804677-B21
804671-B21
804665-B21
804639-B21
Page 24
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Core Options
6G SATA 2.5in MU-PLP SC SSD
HP 1.6TB 6Gb SATA 2.5in MU-PLP SC SSD
HP 800GB 6Gb SATA 2.5in MU-PLP SC SSD
HP 480GB 6Gb SATA 2.5in MU-PLP SC SSD
HP 200GB 6Gb SATA 2.5in MU-PLP SC SSD
804631-B21
804625-B21
832414-B21
804613-B21
6G SATA 2.5in RI-PLP SC SSD
HP 1.6TB 6Gb SATA 2.5in RI-PLP SC SSD
HP 800GB 6Gb SATA 2.5in RI-PLP SC SSD
HP 480GB 6Gb SATA 2.5in RI-PLP SC SSD
HP 240GB 6Gb SATA 2.5in RI-PLP SC SSD
HP 120GB 6Gb SATA 2.5in RI-PLP SC SSD
HP 80GB 6Gb SATA 2.5in RI-PLP SC SSD
804605-B21
804599-B21
804593-B21
804587-B21
804581-B21
804575-B21
6G SATA Hot Plug MU-3 SFF (2.5-inch) SC Solid State Drives
HP 1.92TB 6G SATA MU-3 SFF SC SSD
HP 960GB 6G SATA MU-3 SFF SC SSD
HP 480GB 6G SATA MU-3 SFF SC SSD
HP 240GB 6G SATA MU-3 SFF SC SSD
HP 120GB 6Gb SATA 2.5 MU-PLP SC S2 SSD
817011-B21
816995-B21
816985-B21
816975-B21
816965-B21
6G SATA Hot Plug RI-3 SFF (2.5-inch) SC Solid State Drives
HP 3.84TB 6G SATA RI-3 SFF SC SSD
HP 1.92TB 6G SATA RI-3 SFF SC SSD
HP 960GB 6G SATA RI-3 SFF SC SSD
HP 480GB 6G SATA RI-3 SFF SC SSD
HP 240GB 6G SATA RI-3 SFF SC SSD
HP 120GB 6G SATA RI-3 SFF SC SSD
816929-B21
816919-B21
816909-B21
816899-B21
816889-B21
816879-B21
6G SATA Hot Plug RI SFF (2.5-inch) SC Solid State Drives
HP 960GB 6G SATA RI 2.5in SC SSD
HP 480GB 6G SATA RI 2.5in SC SSD
HP 240GB 6G SATA RI 2.5in SC SSD
789155-B21
789145-B21
789135-B21
12G SAS 10K SFF (2.5in) SC HDD
HP 1.8TB 12G SAS 10K 2.5in SC 512e HDD
HP 1.2TB 12G SAS 10K 2.5in SC ENT HDD
HP 900GB 12G SAS 10K 2.5in SC ENT HDD
HP 600GB 12G SAS 10K 2.5in SC ENT HDD
HP 300GB 12G SAS 10K 2.5in SC ENT HDD
791034-B21
781518-B21
785069-B21
781516-B21
785067-B21
12G SAS SFF (2.5in) SC SSD
HP 1.92TB 12G SAS RI 2.5in SC SSD
HP 800GB 12G SAS WI 2.5in SC SSD
HP 400GB 12G SAS WI 2.5in SC SSD
802891-B21
802586-B21
802582-B21
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 25
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Core Options
HP 200GB 12G SAS WI 2.5in SC SSD
802578-B21
12G SAS 15K SFF (2.5in) SC 512e HDD
HP 600GB 12G SAS 15K 2.5in SC 512e HDD
748387-B21
12G SAS ME SFF (2.5-inch) SC Enterprise Mainstream H2 Solid State Drives
HP 200GB 12G SAS Mainstream Endurance SFF 2.5-in ENT Mainstream SC 3yr Wty H2
Solid State Drive
HP 400GB 12G SAS Mainstream Endurance SFF 2.5-in ENT Mainstream SC 3yr Wty H2
Solid State Drive
HP 800GB 12G SAS Mainstream Endurance SFF 2.5-in ENT Mainstream SC 3yr Wty H2
Solid State Drive
HP 1.6TB 12G SAS Mainstream Endurance SFF 2.5-in ENT Mainstream SC 3yr Wty H2 Solid
State Drive
779164-B21
779168-B21
779172-B21
779176-B21
12G SAS VE SFF (2.5-inch) SC EV Solid State Drives
HP 1.6TB 12G SAS Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State
Drive
HP 800GB 12G SAS Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State
Drive
762263-B21
762261-B21
SAS Hot Plug with SmartDrive SFF (2.5-inch) Enterprise Drives
HP 300GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
759208-B21
HP 450GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
759210-B21
HP 600GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
759212-B21
NOTE: Please see the QuickSpecs for technical specifications and information at
http://h18000.www1.hp.com/products/quickspecs/14038_na/14038_na.html.
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 26
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Additional Options
HP Insight software
HP Insight Control
HP Insight Control including 1yr 24x7 Technical Support and Updates Single Server
License
HP Insight Control including 1yr 24x7 Technical Support and Updates Electronic License
HP Insight Control Server Provisioning Media Kit
HP Insight Management Media Kit
C6N27A
C6N28ABE
BD883A
C6N31A
NOTE: HP Insight Management Media Kit contains DVDs without licenses. Contains HP
Systems Insight Manager, HP Insight Control, HP Matrix Operating Environment, and
Virtual Connect Enterprise Manager software. Uses an integrated installer to perform
quick and accurate software installation and updates.
NOTE: Electronic and Flexible-Quantity licenses can be used to purchase multiple
licenses with a single activation key.
NOTE: Customer will receive a license entitlement certificate, which must be redeemed
online or via fax in order to obtain the license activation key(s). Includes one year of 24 x
7 HP Software Technical Support Service.
NOTE: Licenses ship without media. The HP Insight Management Media Kit can be
ordered separately, or can be downloaded at http://www.hp.com/go/insightupdates
NOTE: For additional license kits, please see the QuickSpecs at:
http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04128216
HP iLO Advanced
License
HP Integrated Lights-Out (iLO) Advanced for ProLiant BladeSystem Remote
Management
HP iLO Advanced for BladeSystem including 3yr 24x7 Technical Support and Updates ELTU
HP iLO Advanced Blade 1 Server License with 3yr 24x7 Tech Support and Updates
HP iLO Advanced for BladeSystem including 1yr 24x7 Technical Support and Updates ELTU
HP iLO Advanced for BladeSystem including 1yr 24x7 Support Single Server License
E6U63ABE
BD502A
E6U60ABE
512488-B21
NOTE: Customer will receive a license entitlement certificate, which must be redeemed
online or via fax in order to obtain the license activation key(s). Includes one or three
years of 24 x 7 HP Software Technical Support Service.
NOTE: For additional license kits, including electronic delivery options, please see the iLO
QuickSpecs at http://www.hp.com/go/iLO
NOTE: Customer will receive a license entitlement certificate, which must be redeemed
online or via fax in order to obtain the license activation key(s). Includes one or three
year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional license kits, please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/14276_na/14276_na.html
HP OneView Software HP OneView Advanced (with HP iLO Advanced and with rights-to-use HP Insight
for Converged Mgmt Control)
HP OneView incl 3yr 24x7 Supp Phys 1 Svr Lic
HP OneView incl 3yr 24x7 Supp Flex Qty E-LTU
HP OneView Media Kit Phys No Lic
E5Y34A
E5Y35AAE
E5Y37A
NOTE: Full licenses of HP OneView Advanced also provide the right-to-use HP Insight
Control without additional charge.
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 27
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Additional Options
NOTE: Server provisioning (via 'HP Insight Control server provisioning') is licensed as part
of HP OneView Advanced and provides multi-server OS and driver provisioning. Media kit
#BD883A can be ordered for a physical copy of this software (USB flash drive).
NOTE: Licenses ship without media. The HP OneView Media Kit can be ordered
separately, or can be downloaded at: http://www.hp.com/go/oneview
NOTE: Electronic and Flexible-Quantity licenses can be used to purchase multiple
licenses with a single activation key.
NOTE: For additional license kits please see the QuickSpecs at
http://h18004.www1.hp.com/products/quickspecs/14621_na/14621_na.html.
High Performance
Clusters
HP Cluster Management Utility
HP Insight Cluster Management Utility 1yr 24x7 Flexible License
HP Insight Cluster Management Utility 3yr 24x7 Flexible License
NOTE: These part numbers can be used to purchase one certificate for multiple licenses
and support with a single activation key. Each license is for one node (server). Customer
will receive a printed end user license agreement and license entitlement certificate via
physical shipment. The license entitlement certificate must be redeemed online in order
to obtain a license key. Customer also will receive a support agreement.
HP Insight Cluster Management Utility Media
NOTE: For additional license kits please see the QuickSpecs at
http://h18004.www1.hp.com/products/quickspecs/12612_na/12612_na.html.
QL803B
BD476A
BD477A
HP I/O Accelerator
Options
HP 1.2TB Read Intensive Mezzanine PCIe Workload Accelerator for BladeSystem c-Class
794603-B21
HP 1.6TB Read Intensive Mezzanine PCIe Workload Accelerator for BladeSystem c-Class
794605-B21
HP Security
HP Trusted Platform Module Option
HP TPM Module 2.0 Kit
NOTE: The TPM (Trusted Platform Module) is a microcontroller chip that can securely
store artifacts used to authenticate the server platform. These artifacts can include
passwords, certificates and encryption keys. Windows® BitLocker™ Drive Encryption
(BitLocker) is a data protection feature available in Windows Server® 2008 R2. BitLocker
leverages the enhanced security capabilities of a Trusted Platform Module (TPM) version
1.2. The TPM works with BitLocker to help protect user data and to ensure that a server
running Windows Server 2008 R2 has not been tampered with while the system was
offline.
NOTE: For more information about TPM, including a white paper, go to
http://h20195.www2.hp.com/v2/GetDocument.aspx?docname=4AA5-4782ENW.
NOTE: ProLiant OS pre-installed units will come with the partition required for TPM
deployment.
NOTE: The TPM key is unique to every TPM deployed server and must be retained.
Misplacing or losing the key could result in data loss.
488069-B21
745823-B21
HP Secure Encryption HP Secure Encryption No Media E-LTU per Drive
HP Secure Encryption No Media Flexible License per Drive
NOTE: HP Secure Encryption is supported on the HP Smart Array P246br as an option. HP
Secure Encryption licensing is based on the number of physical drives requiring
encryption.
NOTE: For more information about HP Secure Encryption, go to
http://www.hp.com/go/hpsecureencryption.
D8S85AAE
D8S84A
HP InfiniBand
Mezzanine Adapters
NOTE: When an InfiniBand adapter is installed in mezzanine slot 1, only one port is active
(regardless of operating mode). When installed in any other mezzanine slot, both ports
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 28
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Additional Options
are active.
NOTE: InfiniBand QDR and FDR speeds are only supported on the HP BladeSystem c7000
Enclosure. For additional information, please see the HP BladeSystem c7000 Enclosure
and InfiniBand QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12586_na/12586_na.html
http://h18000.www1.hp.com/products/quickspecs/13078_na/13078_na.html
HP InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter
NOTE: The QDR InfiniBand adapter may be installed in any mezzanine slot of the server.
HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter
NOTE: The FDR InfiniBand adapter must be installed in mezzanine slot 1 for FDR mode
and may be installed in any mezzanine slot if operated in any other mode.
HP InfiniBand FDR 2-port 545M Adapter
HP Flash Media Kits
for USB Drives
764283-B21
702213-B21
HP Flash Media Kits for USB Drives
HP Enterprise Mainstream Flash Media Kits for Memory Cards
HP 8GB USB Enterprise Mainstream Flash Media Drive Key Kit
HP 8GB microSD Enterprise Mainstream Flash Media Kit
HP 32GB microSD Enterprise Mainstream Flash Media Kit
HP Dual 8GB microSD EM USB Kit
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/13971_na/13971_na.html
HP Care Pack
Services
764282-B21
Proactive Care Services
HP 3 year 24x7 BL4xxc Gen9 Proactive Care Service
HP 3 year 24x7 with Defective Media Retention BL4xxc Gen9 Proactive Care Service
HP 3 year 24x7 BL4xxc Gen9 Proactive Care Advanced Service
HP 3 year 24x7 with Defective Media Retention BL4xxc Gen9 Proactive Care Advanced
Service
HP 3 year 24x7 BL660c Gen9 Proactive Care Service
HP 3 year 24x7 with Defective Media Retention BL660c Gen9 Proactive Care Service
HP 3 year 24x7 BL660c Gen9 Proactive Care Advanced Service
HP 3 year 24x7 with Defective Media Retention BL660c Gen9 Proactive Care Advanced
Service
Installation Services
HP Install c-Class Server Blade Service
737953-B21
726116-B21
700139-B21
741279-B21
U7BN8E
U7BN9E
U7BT6E
U7CF8E
U8LQ2E
U8LQ3E
U8LQ5E
U8LQ6E
UE493E
NOTE: Additional HP Care Pack services can be found at: http://www.hp.com/go/cpc
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 29
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Memory
For detailed memory configuration rules and guidelines, please use the Online DDR4 Memory Configuration Tool:
http://h22195.www2.hp.com/MemoryTool/Home/Legal
Memory Subsystem Architecture
Each Intel® Xeon® E5-4600 v3 family or Intel® Xeon® E5-4600 v3 family processor socket contains four memory channels that
support two DIMMs each for a total of eight (8) DIMM per installed processor or a grand total of thirty two DIMMs for the server. Up
to 64GB capacity DIMMs are supported for 2TB of memory (32 DIMM slots x 64GB per DIMM).
Memory Population Rules and Guidelines:
 A minimum of one DIMM is required per processor.
 Install DIMMs only if the corresponding processor is installed.
 If only two processors are installed in a four processor system, only half of the DIMM slots are available.
 DIMM sizes can be mixed in channel. To maximize performance, it is recommended to balance the total memory capacity
between all installed processors and to load the channels similarly whenever possible.
 LRDIMM and RDIMMs are all distinct memory technologies and cannot be mixed within a server. The majority of ProLiant
Gen9 servers support RDIMM and LRDIMM.
 DIMMs of different speeds may be mixed in any order; the server will select a common optimal speed.
 The maximum memory speed is a function of the memory type, memory configuration, and processor model.
 The maximum memory capacity is a function of the memory type and number of installed processors.
 HP memory from previous generation servers is not compatible with the BL660c Gen9 Server Blade.
 To realize the performance memory capabilities listed in this document, HP SmartMemory is required. For additional
information, please see the HP SmartMemory QuickSpecs at:
http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04111165
 For memory population rules and additional memory guidelines, please see the BL660c Gen9 user guide at
http://www.hp.com/support.
Supported Memory Bandwidth on Intel® Xeon® E5-4600 v3 series Processors
DIMM
Rank
Register DIMM (RDIMM)
Load Reduced (LRDIMM)
Single Rank (1R)
8GB
16GB
8GB
Std Voltage 1.2V
Std Voltage 1.2V
Std Voltage 1.2V
16 slot
servers
32 slot
servers
16
16
32
32
16 slot
servers
32 slot
servers
128
256
256
512
1 DIMM
Per
Channel
2133
2133
DIMM
Capacity
Voltage
Dual Rank (2R)
Dual Rank (2R)
16GB
Std Voltage
1.2V
Quad Rank (4R)
32GB
64GB
Std Voltage 1.2V
Std Voltage
1.2V
16
16
32
32
32
256
512
1024
512
1024
2048
POPULATED DIMM SPEED (MT/s)
2133
2133
2133
2133
SLOTS THAT CAN BE POPULATED
16
16
32
MAXIMUM CAPACITY (GB)*
128
256
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 30
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Memory
2 DIMM
Per
Channel
2133
2133
2133
2133
2133
2133
*Maximum Capacity will vary based on individual serve platform qualification schedule
Memory Speed by E5-4600 v3 Series Processor Model
Processor Models
E5-4627 v3, E5-4655 v3, E5-4650 v3, E5-4660 v3, E5-4667 v3, E5-4669 v3
E5-4620 v3, E5-4640 v3
E5-4610 v3
Supported Memory Speeds
2133MHz
1866MHz
1600MHz
Standard and Maximum Memory Capacity (Pre-configured Models) for E5-4600 v3 Series
Pre Configured Models
Standard Memory
Intel Xeon E5-4650 v3
128GB
(4x 32GB)
64GB
(4x 16GB)
32GB
(2x 16GB)
16GB
(2x 8GB)
Intel Xeon E5-2660 v3
Intel Xeon E5-2650 v3, E5-2640
v3
Intel Xeon E5-2620 v3, E5-2609
v3
Maximum Memory Plus
Optional Memory
1TB
(4x 32GB + 12x 64GB)
256GB
(4x 16GB + 12x 16GB)
256GB
(2x 16GB + 14x 16GB)
240GB
(2x 8GB + 14x 16GB)
Standard Memory Replaced
with Optional Memory
1TB
(16x 64GB)
1TB
(16x 64GB)
1TB
(16x 64GB)
1TB
(16x 64GB)
NOTE: Support for 64GB LRDIMMs and 32GB RDIMMs to be available by early 2015.
NOTE: Capacity references are rounded to the common gigabyte (GB) values.
 2GB = 2,048MB
 4GB = 4,096MB
 8GB = 8,192MB
 16GB = 16,384MB
 32GB = 32,768MB
Memory options part number decoder
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 31
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Memory
Item
Description
Definition
1
Capacity
8 GByte
16 GByte
32 GByte
2
Rank
1R = Single-rank
2R = Dual-rank
4R = Quad-rank
3
Data width
x4 = 4-bit
x8 = 8-bit
4
Memory generation
DDR4
5
Max. Memory speed 2133MT/s
6
6
CasLatency
DIMM type
P = 15
R = RDIMM (registered)
L = LRDIMM (load reduced)
Following are memory options available from HP:
HP Memory
NOTE: HP memory from previous generation servers (DDR3) is not compatible with
this server. HP SmartMemory is required to realize the memory performance
improvements and enhanced functionality listed in this document for Gen9. For
additional information, please see the HP SmartMemory QuickSpecs at:
http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04111165
NOTE: LRDIMM and RDIMM are distinct memory technologies and cannot be mixed
within a server.
NOTE: Depending on the memory configuration and processor model, the memory
speed may run at 2133MHz, 1866MHz, or 1600MHz. Please see Memory Population
Table or the Online Memory Configuration Tool at:
http://h22195.www2.hp.com/MemoryTool/Home/Legal
HP SmartMemory
Registered DIMMs (RDIMMs)
Registered DIMMs (RDIMMs) - E5-4600 v3 series Processors
HP 8GB (1x8GB) Dual Rank x8 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 8GB (1x8GB) Single Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 32GB (1x32GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
Load Reduced DIMMs (LRDIMMs) - E5-4600 v3 series Processors
HP 64GB (1x 64GB) Quad Rank x4 DDR4-2133 CAS 15-15-15 Load Reduced Memory
Kit
HP 48GB (1x16GB +1x32GB) DDR4-2133 CAS-15-15-15 Load Reduced Memory FIO Kit
HP 32GB (1x32GB) Quad Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory
Kit
HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit
HP 64GB 4Rx4 PC4-2133P-L Kit
NOTE: For additional memory rules and guidelines, see the "Memory" section later in
this document.
NOTE: For more information on ProLiant Energy Efficient Features, see:
http://www.hp.com/go/proliant-energy-efficient
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
759934-B21
726718-B21
726719-B21
728629-B21
726724-B21
792278-B21
726722-B21
726720-B21
726724-B21
Page 32
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Storage
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 33
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Technical Specifications
System Unit
Dimensions (H x W x D)
(with bezel)
Weight
(approximate)
Power Specifications
366.27mm (14.42") x 56.54mm (2.23") x 516.67mm (20.34")
Maximum: 4 processors,
2 FlexibleLOMs, 32
DIMMs, 4 hard drives, 3
14.00 lb (6.33 kg)
mezzanine cards, and 1
flash cache batteries
installed
Minimum: 2 processors, 1
FlexibleLOM, and 2
10.50 lb (4.75 kg)
DIMMs installed
For power specifications including input requirements, BTU rating, and power
supply output, please see the:


System Inlet
Temperature
HP BladeSystem c3000 Enclosure QuickSpecs at
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c0412
8340
HP BladeSystem c7000 Enclosure QuickSpecs at
http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c0412833
9
To review typical system power ratings use the HP Power Advisor which is
available via the online tool located at http://www.hp.com/go/hppoweradvisor.
NOTE: For optimal cooling and system performance the BL660c Gen9 Server
Blade requires the c7000 enclosure to be configured with 10 fans and the
c3000 enclosure to be configured with 6 fans.
Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m (1.8°F
per every 1,000 ft) above sea level to a maximum
of 3,050 m (10,000 ft), no direct sustained
sunlight.
Maximum rate of change is 10°C/hr (18°F/hr). The
upper limit may be limited by the type and
number of options installed.
Extended Ambient
Operating Support
Relative Humidity
(non-condensing)
System performance may be reduced if operating
with a fan fault or above 30°C (86°F).
Non-operating
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
For Approved hardware configurations, the supported system inlet range is
extended to be:
5° to 10°C (41° to 50°F) and 35° to 40°C (95° to 104°F) at sea level with an
altitude derating of 1.0°C per every 175 m (1.8°F per every 574 ft) above 900 m
(2953 ft) to a maximum of 3050 m (10,000 ft)
NOTE: Qualifications for extended ambient configurations are detailed at:
https://www.hp.com/servers/ASHRAE
Operating
10 to 90% relative humidity (Rh), 28°C (82.4°F)
maximum wet bulb temperature, noncondensing.
Non-operating
5 to 95% relative humidity (Rh), 38.7°C (101.7°F)
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 34
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Technical Specifications
Altitude
Acoustic Noise
HP Smart Array P246br
Controller
Disk Drive Interface
Server Interface
Cache Memory
Logical Drives
Supported
Host Memory
Addressing
RAID Support
Other
HP Dynamic Smart Array Disk Drive Interface
B140i Controller
Server Interface
SAS Connectors
Cache Memory
SAS Speed
Logical Drives
Supported
Host Memory
Addressing
Hot Plug Support
RAID Support
Other
HP FlexFabric 10Gb
2-port 536FLB
FlexibleLOM
Type
maximum wet bulb temperature, noncondensing.
Operating
3,050 m (10,000 ft). This value may be limited by
the type and number of options installed.
Maximum allowable altitude change rate is 457
m/min (1,500 ft/min).
Non-operating
9,144 m (30,000 ft). Maximum allowable altitude
change rate is 457 m/min (1,500 ft/min).
For acoustic noise specifications, please see the HP BladeSystem c-Class
Enclosures QuickSpecs located at:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_na/
12790_na.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_na/
12810_na.html
12Gb/s SAS (Serial Attached SCSI)
6Gb/s SATA (Serial ATA)
x8 5G PCIe 3.0 provides 8GB/s maximum bandwidth
1GB flash backed write cache (FBWC) cache standard
64 (with included 1GB cache)
64-bit, supporting servers memory space greater than 4GB
RAID 1 (mirroring), RAID 0 (striping), RAID 5, RAID 10
Upgradeable firmware with recovery ROM
Online drive flash (with SAS drives)
6Gb/s SATA (Serial ATA)
Embedded x4 PCIe 2.0
4 internal SATA ports
None
6Gb/s SATA links
Up to 10 logical volumes (4 physical drives)
64-bit, supporting greater than 4GB server memory space
Yes
RAID 1 (Mirroring)
RAID 0 (Striping)
RAID 5
Upgradeable firmware with recovery ROM
Integrated dual-port KR 10Gb FlexibleLOM with FlexFabric (Flex-10, FCoE,
hardware-based iSCSI, iSCSI boot, TCP/IP offload engine, and autosencing
1Gb/10Gb Ethernet capability)
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 35
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Technical Specifications
Network Processor
QLogic 57840S with integrated MAC/PHY
Data Transfer Method
x8 PCI Express 3.0
Network Transfer Rate Two ports, each at 20Gbps full duplex; 40Gbps aggregate full duplex
theoretical bandwidth
NOTE: Each port is autosensing 1Gb/10Gb, and can interoperate with 1Gb or
10Gb HP BladeSystem c-Class interconnect components. Both ports will
operate at the same speed.
NOTE: Each port on the 554FLB adapter transmits from the server at 20Gbps
(theoretical) full duplex.
IEEE Compliance
802.1p, 802.1q, 802.1qau, 802.3ad, 802.3ae, 802.3ap (10GBase-KX4) and
802.3x
HP FlexFabric 20Gb
2-port 650FLB
FlexibleLOM
Standard Features
Full hardware offload of iSCSI and FCoE storage protocol processing for highest
performance
converged Ethernet data and storage networks.
Dual-port 10GbE Flex-10 FlexibleLOM network adapter that provides the
flexibility to choose the
type of LOM to meet growing infrastructure needs
Industry-leading throughput and latency performance
Supports HP's Flex-10 blade interconnect technology
User configurable bandwidth settings when combined with the 10Gb Flex-10
Virtual Connect
module. From 100Mb/s to10Gb/s on up to four "Physical Function" NICs per
port, in increments of
100Mb/s for NIC. The combined bandwidth of NICs cannot exceed port
bandwidth i.e. 10 Gb.
Up to 40Gb/s bi-directional near line rate throughput
Hardware acceleration and offloads for stateless TCP/IP, TCP Offload Engine
(TOE)
Improved small packet performance
Support for Preboot eXecution Environment (PXE)
Integrated PHY and MAC
Supports for SR-IOV
Support for Network Partitioning (NPAR)
Type
Integrated dual-port KR2 20Gb FlexibleLOM with FlexFabric (Flex-20, FCoE,
RoCE, Tunnel Offload with VXLAN/NVGRE, hardware-based iSCSI, iSCSI boot,
TCP/IP offload engine, and autosencing Ethernet speed capability)
Network Processor
Emulex XE-104
Data Transfer Method
x8 PCI Express 3.0
Network Transfer Rate Two ports, each at 40 Gbps bi-directional; 80 Gbps aggregate bi-directional
theoretical bandwidth
IEEE Compliance
802.3ae, 802.1Q, 802.3x, 802.1p, 802.3ad/LACP, 802.1AB(LLDP), 802.1Qbg,
802.1Qbb, 802.1Qaz, 802.3ap
Standard Features
Dual 20Gb ports provide up to 80Gb bi-directional per adapter
Multi-speed adapter operates at either 20GbE or 10GbE
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 36
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Technical Specifications
Converges FCoE or RoCE with LAN traffic on a single Ethernet wire
Tunnel Offload support for VXLAN and NVGRE
RDMA over Converged Ethernet (RoCE) for greater server efficiency and lower
latency (6125XLG only)
Advanced storage offload processing freeing up valuable CPU cycles
Supports UEFI and legacy boot options
Mixed Storage – supports NIC + FCoE on one port, and NIC + iSCSI on the other
Concurrent Storage – concurrently supports NIC, FCoE, and iSCSI storage
functions on the same port (NIC + FCoE + iSCSI)
Industry-leading throughput and latency performance
Supports HP's Flex-20 blade interconnect technology
Over eight million small packets/s, ideal for web/mobile applications, mobile
messaging, and social media
User configurable bandwidth settings when combined with the 20Gb Flex-20
Virtual Connect module. From 100Mb/s to10Gb/s on up to four "Physical
Function" NICs per port, in increments of 100Mb/s for NIC. The combined
bandwidth of NICs cannot exceed port bandwidth i.e. 20 Gb/s.
Greater bandwidth with PCIe 3.0
Jumbo Frames support
Supports Wake On LAN (WOL)
Support for Preboot eXecution Environment (PXE)
Support for Microsoft Windows SMB Direct
Optimized host virtualization density with SR-IOV support
Environment-friendly
Products and Approach
End-of-life
Management and
Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to:
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office. Products
returned to HP will be recycled, recovered or disposed of in a responsible
manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green. These instructions may be
used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 37
QuickSpecs
HP ProLiant BL660c Gen9 Server Blade
Summary of Changes
Date
28-Sep-2015
Version History
From Version 4 to 5
Action
Added
Description of Change:
SKU added:


28-Aug-2015
10-Jul-2015
From Version 3 to 4
From Version 2 to 3
Changed
Changed
Changed
Removed
Added
19-Jun-2015
From Version 1 to 2
Changed
Removed
Added
726724-B21
745823-B21
HP Hard Drives updated
Information in Core Options section was updated.
Standard Features and Optional Features sections were
updated.
Skus removed from Core Options section:
 741155-B21  741151-B21  741146-B21
 717965-B21  734360-B21  717973-B21
 739898-B21  717971-B21  739888-B21
 717969-B21  691868-B21  691868-B21
 691866-B21  691862-B21  756636-B21
 756621-B21  748387-B21  791034-B21
 781518-B21  785069-B21  781516-B21
 785067-B21  684214-B21  665246-B21
 665639-B21  684214-B21
Sku added in Core Options Section.
 779176-B21
Information in Additional Options and Configuration
information - Factory Integrated Models section were
updated.
Obsolete Sku removed:
 741146-B21
Skus were added in Additional Options Section:
 U8LQ2E
 U8LQ3E
 U8LQ5E
 U8LQ6E
 659818-B21
 651281-B21
© Copyright 2015 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon Inside are
trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products
and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or
editorial errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
c04543744 — DA – 15185 North America — Version 5 — September 28, 2015
Page 38
Download PDF
Similar pages