OWNER’S MANUAL
PLASMA TV
Please read this manual carefully before operating
your TV and retain it for future reference.
50PB6600
60PB6600
50PB6650
60PB6650
*MFL68040815*
60PB6900
www.lg.com
P/NO : MFL68040815 (1404-REV00)
2
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Always comply with the following precautions to avoid dangerous situations and ensure peak
performance of your product.
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the presence
of uninsulated dangerous voltage within the
product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not allow the television to become wet.
yy
Clean only with a dry cloth.
yy
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ENGLISH
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying
the appliance.
WARNING/CAUTION
- TO REDUCE THE RISK OF FIRE AND
ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
WARNING
If you ignore the warning message, you
may be seriously injured or there is a
possibility of accident or death.
CAUTION
If you ignore the caution message, you may
be slightly injured or the product may be
damaged.
NOTE
The note helps you understand and use
the product safely. Please read the note
carefully before using the product.
WARNING: This product contains chemicals
known to the State of California to cause cancer
and birth defects or other reproductive harm.
Wash hands after handling.
Do not block any ventilation openings. Install
yy
in accordance with the manufacturer’s
instructions.
Do not install near any heat sources such
yy
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
Do not defeat the safety purpose of the
yy
polarized or grounding-type plug. A polarized
plug has two blades with one wider than
the other. A grounding type plug has two
blades and a third grounding prong. The
wide blade or the third prong are provided
for your safety. If the provided plug does not
fit into your outlet, consult an electrician for
replacement of the obsolete outlet (Can differ
by country).
Do not press strongly upon the panel with a
yy
hand or a sharp object such as a nail, pencil
or pen, or make a scratch on it.
IMPORTANT SAFETY INSTRUCTIONS
Protect the power cord from being walked on
yy
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
Only use attachments/accessories specified
yy
by the manufacturer.
Use only with a cart, stand, tripod, bracket,
yy
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Refer all servicing to qualified service
yy
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
Do not stick metal objects or any other
yy
conductive material into the power cord. Do
not touch the end of the power cord while it
is plugged in.
Keep the packing anti-moisture material or
yy
vinyl packing out of the reach of children. Antimoisture material is harmful if swallowed. If
swallowed by mistake, induce vomiting and
go the nearest hospital. Additionally, vinyl
packing can cause suffocation. Keep it out of
the reach of children.
CAUTION concerning the Power Cord
yy
(Can differ by country):
It is recommended that appliances be
placed upon a dedicated circuit; that is, a
single outlet circuit which powers only that
appliance and has no additional outlets or
branch circuits. Check the specification page
of this owner’s manual to be certain. Do not
connect too many appliances to the same
AC power outlet as this could result in fire or
electric shock. Do not overload wall outlets.
Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could
result in electric shock or fire. Periodically
examine the cord of your appliance, and
if its appearance indicates damage or
deterioration, unplug it, discontinue use of
the appliance, and have the cord replaced
with an exact replacement part by an
authorized service. Protect the power cord
from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a
door, or walked upon. Pay particular attention
to plugs, wall outlets, and the point where
the cord exits the appliance. Do not move
the TV with the power cord plugged in. Do
not use a damaged or loose power cord. Be
sure do grasp the plug when unplugging the
power cord. Do not pull on the power cord to
unplug the TV.
Warning - To reduce the risk of fire or
yy
electrical shock, do not expose this product
to rain, moisture or other liquids. Do not
touch the TV with wet hands. Do not install
this product near flammable objects such
as gasoline or candles, or expose the TV to
direct air conditioning.
Do not expose to dripping or splashing and
yy
do not place objects filled with liquids, such
as vases, cups, etc. on or over the apparatus
(e.g. on shelves above the unit).
ENGLISH
Unplug this apparatus during lightning storms
yy
or when unused for long periods of time.
3
4
IMPORTANT SAFETY INSTRUCTIONS
Grounding
yy
(Except for devices which are not grounded.)
Ensure that you connect the earth ground
wire to prevent possible electric shock
(i.e. a TV with a three-prong grounded AC
plug must be connected to a three-prong
grounded AC outlet). If grounding methods
are not possible, have a qualified electrician
install a separate circuit breaker. Do not try to
ground the unit by connecting it to telephone
wires, lightning rods, or gas pipes.
Short-circuit
Breaker
Power
Supply
ENGLISH
As long as this unit is connected to the AC
yy
wall outlet, it is not disconnected from the
AC power source even if the unit is turned
off.
Do not attempt to modify this product in
yy
any way without written authorization from
LG Electronics. Unauthorized modification
could void the user’s authority to operate this
product.
Outdoor Antenna Grounding (Can differ by
yy
country):
If an outdoor antenna is installed, follow
the precautions below. An outdoor antenna
system should not be located in the vicinity
of overhead power lines or other electric light
or power circuits, or where it can come in
contact with such power lines or circuits as
death or serious injury can occur. Be sure the
antenna system is grounded so as to provide
some protection against voltage surges
and built-up static charges. Section 810 of
the National Electrical Code (NEC) in the
U.S.A. provides information with respect to
proper grounding of the mast and supporting
structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding
conductors, location of antenna discharge
unit, connection to grounding electrodes and
requirements for the grounding electrode.
Antenna grounding according to the National
Electrical Code, ANSI/NFPA 70
Antenna Lead in Wire
Antenna Discharge Unit
(NEC Section 810-20)
Ground Clamp
Electric Service
Equipment
Grounding Conductor
(NEC Section 810-21)
Ground Clamp
NEC: National Electrical Code
Power Service Grounding
Electrode System
(NEC Art 250, Part H)
Cleaning
yy
When cleaning, unplug the power cord and
wipe gently with a soft cloth to prevent
scratching. Do not spray water or other
liquids directly on the TV as electric shock
may occur. Do not clean with chemicals such
as alcohol, thinners, or benzine.
Moving
yy
Make sure the product is turned off,
unplugged, and all cables have been
removed. It may take 2 or more people to
carry larger TVs. Do not press or put stress
on the front panel of the TV.
Ventilation
yy
Install your TV where there is proper
ventilation. Do not install in a confined space
such as a bookcase. Do not cover the product
with cloth or other materials while plugged.
Do not install in excessively dusty places.
If you smell smoke or other odors coming
yy
from the TV, unplug the power cord and
contact an authorized service center.
Keep the product away from direct sunlight.
yy
Never touch this apparatus or antenna during
yy
a lightning storm.
When mounting a TV on the wall, make sure
yy
not to install the TV by hanging the power
and signal cables on the back of the TV.
Do not allow an impact shock, any objects to
yy
fall into the product, and do not drop anything
onto the screen.
Disconnecting the Main Power
yy
The power outlet used with this device must
remain easily accessible.
Store the accessories (battery, etc.) in a safe
yy
location out of the reach of children.
This apparatus uses batteries. In your
yy
community there might be regulations that
require you to dispose of these batteries
properly due to environmental considerations.
Please contact your local authorities for
disposal or recycling information.
Do not dispose of batteries in a fire.
yy
Do not short circuit, disassemble, or allow
yy
the batteries to overheat.
IMPORTANT SAFETY INSTRUCTIONS
Preventing image burn or burn-in on your
TV screen
If a fixed image displays on the TV screen for
yy
a long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is image burn or burn-in and not
covered by the warranty.
If the aspect ratio of the TV is set to 4:3 for a
yy
long period of time, image burn may occur on
the letterboxed area of the screen.
Avoid displaying a fixed image on the TV
yy
screen for a long period of time (2 or more
hours for LCD, 1 or more hours for the
Plasma TV) to prevent image burn.
For USA and Canada
FCC NOTICE
This equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the
equipment and the receiver.
- Connect the equipment to an outlet on
a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced
radio/TV technician for help.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference and (2) this device must
accept any interference received, including
interference that may cause undesired
operation of the device.
Any changes or modifications in construction
of this device which are not expressly
approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
NOTE TO CABLE/TV INSTALLER
This reminder is provided to call the CATV
system installer’s attention to Article 82040 of the National Electric Code (U.S.A.).
The code provides guidelines for proper
grounding and, in particular, specifies that
the cable ground shall be connected to the
grounding system of the building, as close to
the point of the cable entry as practical.
ENGLISH
Dot Defect
yy
The panel is a high technology product with
resolution of two million to six million pixels.
In a very few cases, you could see fine dots
on the screen while you’re viewing the TV.
Those dots are deactivated pixels and do not
affect the performance and reliability of the
TV.
Generated Sound
yy
Cracking noise A cracking noise that occurs
when watching or turning off the TV is
generated by plastic thermal contraction
due to temperature and humidity. This noise
is common for products where thermal
deformation is required.
Electrical circuit humming/panel buzzing
A low level noise is generated from a highspeed switching circuit, which supplies a
large amount of current to operate a product.
It varies depending upon the product.
This generated sound does not affect the
performance and reliability of the product.
Take care not to touch the ventilation
yy
openings. When watching the TV for a long
period, the ventilation openings may become
hot. This does not affect the performance of
the product or cause defects in the product.
Do not install this product on a wall if it
yy
could be exposed to oil or oil mist. This may
damage the product and cause it to fall.
5
6
IMPORTANT SAFETY INSTRUCTIONS
Viewing 3D Imaging (For 3D models)
WARNING
Viewing Environment
Viewing Time
yy
- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a
long period of time may cause headache, dizziness, fatigue or eye strain.
Those that have a photosensitive seizure or chronic illness
Some users may experience a seizure or other abnormal symptoms when they are exposed to a
yy
flashing light or particular pattern from 3D content.
Do not watch 3D videos if you feel nauseous, are pregnant and/ or have a chronic illness such as
yy
epilepsy, cardiac disorder, or blood pressure disease, etc.
3D content is not recommended for those who suffer from stereo blindness or stereo anomaly.
yy
Double images or discomfort in viewing may be experienced.
If you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble
yy
sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks.
If your eyesight varies between your right and left eye, you may experience eye strain.
yy
ENGLISH
Symptoms which require discontinuation or refraining from watching 3D contents
Do not watch 3D content when you feel fatigue from lack of sleep, overwork or intoxication.
yy
When these symptoms are experienced, stop using/watching 3D content and get enough rest until
yy
the symptom subsides.
- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball
pain, dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or
fatigue.
IMPORTANT SAFETY INSTRUCTIONS
7
CAUTION
Viewing Environment
Viewing Distance
yy
- Maintain a distance of at least twice the screen diagonal length when watching 3D content. If you
feel discomfort in viewing 3D content, move further away from the TV.
Viewing Position (Only for SG Mode)
yy
- Face the center of the screen at eye level with the head looking straight ahead. Otherwise, you
maynot be able to view 3D contents properly.
Cautions when using the 3D glasses
Only use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.
yy
Do not use 3D glasses instead of your normal glasses, sunglasses or protective goggles.
yy
Using modified 3D glasses may cause eye strain or image distortion.
yy
Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.
yy
The 3D glasses are fragile and are easy to scratch. Use a soft, clean piece of cloth when wiping the
yy
lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with
chemicals.
ENGLISH
Viewing Age
Infants / Children
yy
- Usage/ Viewing 3D content for children under the age of 5 is prohibited.
- Children under the age of 10 may overreact and become overly excited because their vision is in
development (for example: trying to touch the screen or trying to jump into it. Special monitoring
and extra attention is required for children watching 3D content.)
- Children have greater binocular disparity of 3D presentations than adults because the distance
between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic
depth compared to adults for the same 3D image.
Teenagers
yy
- Advise teenagers under the age of 19 not to watch 3D videos for a long time when they are tired.
Elderly
yy
- The elderly may perceive less of a 3D effect than the youth. Do not sit closer to the TV than the
recommended distance.
8
LICENSES / OPEN SOURCE SOFTWARE NOTICE
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com .
OPEN SOURCE SOFTWARE NOTICE
ENGLISH
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in
this product, please visit http://opensource.lge.com .
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping and handling) upon email request to
opensource@lge.com . This offer is valid for three (3) years from the date on which you purchased the
product.
NOTE
Image shown may differ from your TV.
yy
Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yy
The available menus and options may differ from the input source or product model that you are
yy
using.
New features may be added to this TV in the future.
yy
9
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
CAUTION
Do not use any unapproved items to ensure the safety and product life span.
yy
Any damages or injuries by using unapproved items are not covered by the warranty.
yy
Some models appear to have a thin film on the screen. It is actually part of the screen; do not
yy
remove it.
Owner’s
Manual
Ferrite core
(Depending upon
model)
Stand Body,
Stand Base
Stand Screws
3 EA, M5 x L25
Stand Screws
4 EA, M4 x L14
Power Cord
Stand Sticker
(Depending upon
model)
AN-WF500
WiFi/Bluetooth
Dongle
(For 50/60PB6600)
NOTE
The items supplied with your product may vary depending upon the
yy
model.
Product specifications or contents of this manual may be changed
yy
B
B
without prior notice due to upgrade of product functions.
For an optimal connection, HDMI cables and USB devices should
yy
A
have bezels less than 10 mm (0.39 inches) thick and 18 mm
(0.7 inches) width.
*A 10 mm (0.39 inches)
Use an extension cable that supports USB 2.0 if the USB cable or *B 18 mm (0.7 inches)
yy
USB flash drive does not fit into your TV’s USB port.
A
ENGLISH
Remote
Control,
Batteries
(AAA)
10
ASSEMBLING AND PREPARING
NOTE
yyHow to use the ferrite core (Depending upon model)
- If there are three ferrite cores, follow as shown in Figure 1 and Figure 2.
- If there are four ferrite cores, follow as shown in Figure 1, Figure 2 and Figure 3.
1 Use the ferrite core to reduce the electromagnetic interference in the power cable.
Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a
wall plug.
[to a wall plug]
[to the TV]
[Figure 1]
(Black)
[Cross Section of
Ferrite Core]
2 Use the ferrite core to reduce the electromagnetic interference in the LAN cable.
Wind the LAN cable once on the ferrite core. Place the ferrite core close to the TV.
ENGLISH
10 mm(+ / - 5 mm)
[to the TV]
[to an External device]
[Figure 2]
(Gray)
[Cross Section of
Ferrite Core]
3 Use the ferrite core to reduce the electromagnetic interference in the cable.
Wind the component cable on the ferrite core once. Place the ferrite core close to the TV.
[to the TV]
[to an External device]
[Figure 3]
10 mm(+ / - 5 mm)
(Black)
[Cross Section of
Ferrite Core]
ASSEMBLING AND PREPARING
11
Optional Extras
Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items.
These devices only work with certain models.
The model name or design may be changed manufacturer’s circumstances or policies.
AG-S3**
3D Glasses
AN-MR500
Magic Remote
LG Audio Device
AN-VC5**
Video Call Camera
AN-TP300
Touch Pen, Cradle
AN-TD200
Touch Pen Dongle
AN-WF500
WiFi/Bluetooth
Dongle
(For 50/60PB6600)
With the Touch Pen, you can use the TV as a touch
monitor with or without connecting it to your PC.
You need to purchase the Touch Pen (including the
cradle) together with the dongle.
PB6600
PB6650
PB6900
•
AG-S3** 3D Glasses
AN-MR500 Magic Remote
•
•
•
LG Audio Device
•
•
•
AN-WF500 WiFi/Bluetooth Dongle
(For 50/60PB6600)
•
AN-VC5** Video Call Camera
•
•
•
AN-TP300 Touch Pen, Cradle
AN-TD200 Touch Pen Dongle
•
•
•
»»
With the AN-WF500, you can use the Magic Remote and LG Audio Device (Wireless).
You need to purchase the AN-WF500. (For 50/60PB6600)
ENGLISH
Compatibility
12
ASSEMBLING AND PREPARING
Lifting and moving the TV
Parts and Buttons
When moving or lifting the TV, read the
following to prevent the TV from being
scratched or damaged and for safe
transportation regardless of its type and size.
Screen
CAUTION
Avoid touching the screen at all times, as
yy
this may result in damage to the screen.
Do not place the product on the floor with
yy
its front facing down. Failure to do so may
result in damage to the screen.
It is recommended to move the TV in the
yy
box or packing material that the TV originally
came in.
Before moving or lifting the TV, disconnect
yy
the power cord and all cables.
When holding the TV, the screen should face
yy
away from you to avoid damage.
Speakers
Power Indicator
Remote Control Sensor
Intelligent Sensor1
ENGLISH
Hold the top and bottom of the TV frame
yy
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
Joystick Button
NOTE
Joystick button is located below the
yy
screen of TV.
1 Intelligent Sensor - Adjusts the image quality
and brightness based on the surrounding
environment.
Use at least two people to move a large TV.
yy
When transporting the TV by hand, hold the
yy
TV as shown in the following illustration.
When transporting the TV, do not expose the
yy
TV to jolts or excessive vibration.
When transporting the TV, keep the TV
yy
upright; never turn the TV on its side or tilt
towards the left or right
ASSEMBLING AND PREPARING
13
Using the joystick button
You can operate the TV by pressing the button or moving the joystick left, right, up, or down.
Basic Functions
Power On
When the TV is turned off, place your finger on the joystick button,
press it once and release it.
Power Off
When the TV is turned on, place your finger on the joystick button,
press it once for a few seconds and release it.
(However, if the Menu button is on the screen, pressing and holding
the joystick button will let you exit the Menu.)
Volume Control
If you place your finger over the joystick button and move it left or
right, you can adjust the volume level you want.
Channels Control
If you place your finger over the joystick button and move it up or
down, you can scroll through the saved channels you want.
Adjusting the Menu
When the TV is turned on, press the joystick button one time.
You can adjust the Menu items ( , , , ) moving the joystick button up, down, left, or right.
TV Off
Turns the power off.
Settings
Accesses the main menu.
Close
Clears on-screen displays and returns to TV viewing.
Input List
Changes the input source.
ENGLISH
NOTE
When your finger over the joystick button and push it to the up, down, left, or right, be careful not to
yy
press the joystick button. If you press the joystick button first, you can not adjust the volume level
and saved channels.
14
ASSEMBLING AND PREPARING
Setting up the TV
You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment
center or other furniture.
Attaching the stand
If you are not mounting the TV to a wall, use the following instructions to attach the stand.
1
Before assembling, attach the stand
sticker under the stand body to reduce
the electromagnetic interference as
shown below. (Depending upon model)
2
3 EA
M5 x L25
ENGLISH
CAUTION
Tighten the screw fully, otherwise the set
yy
may lean or fall.
Stand Sticker
Stand Body
Front
3
4 EA
M4 x L14
Stand Base
CAUTION
When assembling the stand base and the
yy
stand body, press the stand body until you
can hear a clicking sound in the hook.
CAUTION
When attaching the stand to the TV
yy
set, place the screen facing down on a
cushioned table or flat surface to protect the
screen from scratches.
ASSEMBLING AND PREPARING
Mounting on a table
1
15
Securing the TV to a wall (optional)
Lift and tilt the TV into its upright position on
a table.
- Leave a 10 cm (4 inches) (minimum) space
from the wall for proper ventilation.
(Depending upon model)
10 cm (4 inches)
10 cm
10 cm
10 cm
1
CAUTION
Do not place the TV near or on sources
yy
of heat, as this may result in fire or other
damage.
3 Connect the eye-bolts and wall brackets
tightly with a sturdy rope or cable.
Make sure to keep the rope parallel to the
flat surface.
CAUTION
Make sure that children do not climb on or
yy
hang on the TV.
NOTE
Use a platform or cabinet that is strong and
yy
large enough to support the TV securely.
Brackets, bolts and ropes, are optional. You
yy
can obtain additional accessories from your
local dealer.
ENGLISH
2 Connect the power cord to a wall outlet.
Insert and tighten the eye-bolts, or TV
brackets and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to
the wall.
Match the location of the wall bracket and
the eye-bolts on the rear of the TV.
16
ASSEMBLING AND PREPARING
Mounting on a wall
CAUTION
An optional wall mount can be used with your
LG Television. Consult with your local dealer for
a wall mount that supports the VESA standard
used by your TV model. Carefully attach the
wall mount bracket at the rear of the TV.
Install the wall mount bracket on a solid wall
perpendicular to the floor. If you are attaching
the TV to other building materials, please
contact qualified personnel to install the wall
mount. Detailed instructions will be included
with the wall mount. We recommend that you
use an LG brand wall mount. When you do not
use LG’s wall mount bracket, please use a wall
mount bracket where the device is adequately
secured to the wall with enough space to allow
connectivity to external devices.
Disconnect the power before moving or
yy
installing the TV. Otherwise electric shock
may occur.
If you install the TV on a ceiling or slanted
yy
wall, it may fall and result in severe
injury. Use an authorized LG wall mount
and contact the local dealer or qualified
personnel. When using a third-party wall
mount, it is not covered by the warranty.
Do not over tighten the screws as this may
yy
cause damage to the TV and void your
warranty.
Use the screws and wall mounts that meet
yy
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the warranty.
NOTE
ENGLISH
10 cm (4 inches)
10 cm
10 cm
10 cm
Make sure to use screws and wall mounts that
meet the VESA standard. Standard dimensions
for the wall mount kits are described in the
following table.
Model
50PB6600
60PB6600
50PB6650
60PB6650
60PB6900
VESA (A x B)
400 x 400
A
B
Standard screw
M6
Number of screws
4
Wall mount bracket PSW420BX
(optional)
Use the screws that are listed in the VESA
yy
standard screw specifications.
The wall mount kit includes an installation
yy
manual and necessary parts.
The wall mount bracket is optional. You can
yy
obtain additional accessories from your local
dealer.
The length of screws may differ depending
yy
upon the wall mount. Make sure to use the
proper length.
For more information, refer to the manual
yy
supplied with the wall mount.
MAKING CONNECTIONS
17
MAKING CONNECTIONS
You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD
players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.
For more information on external device’s connection, refer to the manual provided with each device.
NOTE
If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input
yy
cable to the TV through a DVD recorder or VCR. For more information about recording, refer to the
manual provided with the connected device.
The external device connections shown may differ slightly from illustrations in this manual.
yy
Connect external devices to the TV regardless about the order of the TV port.
yy
If you connect a gaming device to the TV, use the cable supplied with the gaming device.
yy
Refer to the external equipment’s manual for operating instructions.
yy
Connecting to an antenna or cable
Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations
may differ from the actual items and an RF cable is optional.
UHF Antenna
Antenna
ANTENNA/
CABLE IN
Coaxial (75Ω)
(*Not Provided)
Terminal
CAUTION
Make sure not to bend the copper wire of
yy
the RF cable.
Copper wire
Complete all connections between devices,
yy
and then connect the power cord to the
power outlet to prevent damage to your TV.
NOTE
yyUse a signal splitter to use more than
2 TVs.
yyDTV Audio Supported Codec: MPEG,
Dolby Digital
ENGLISH
VHF Antenna
18
MAKING CONNECTIONS
Other connections
Connect your TV to external devices. For the best picture and audio quality, connect the external device
and the TV with the HDMI cable as shown. Depending upon the model, a cable may be provided.
DVD / Blu-Ray / HD Cable Box / HD STB / PC
HDMI
OPTICAL
DIGITAL
AUDIO OUT
ENGLISH
COMPONENT IN
/ AV IN
LAN
1
(PC)
L/MONO-AUDIO- R
VIDEO
Y
2
(ARC)
PB
PC-AUDIO IN
PR
AUDIO OUT
ANTENNA/
CABLE IN
AUDIO
VIDEO
L (MONO) AUDIO R
USB IN 2
USB IN 3
VCR / DVD / Blu-Ray / HD Cable Box
RED
WHITE
YELLOW
R
RED
WHITE
YELLOW
L
RED
PR
RED
WHITE
VIDEO
WHITE
PB
RED
Digital Audio
System
BLUE
GREEN
OPTICAL AUDIO IN
RED
BLUE
GREEN
Y
DVI OUT
R
AUDIO
VIDEO
L (MONO) AUDIO R
MAKING CONNECTIONS
19
USB / USB Hub / HDD
USB IN 3
L
USB IN 2
VIDEO
PR
USB IN 1
PB
MHL passive cable
Mobile phone
ENGLISH
IN 3 (MHL)
PTICAL AUDIO IN
Y
20
REMOTE CONTROL
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly. To install batteries,
and
open the battery cover, replace batteries (1.5 V AAA) matching the
ends to the label inside the compartment, and close the battery cover. Failure to match the correct
polarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or
ambient pollution. To remove the batteries, perform the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this may damage the remote control.
yy
This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote
sensor.
(For PB6600/PB6650 series)
ENGLISH
(POWER) Turns the TV on or off.
TV Returns to the last TV channel.
CAPTION Activates or deactivates the subtitles.
AV MODE Selects an AV mode.
RATIO Resizes an image.
INPUT Changes the input source. Turns the TV on if it is off.
FLASHBK
SMART
SLEEP
VD/
MY APPS
Number button Enters numbers.
- (Dash) Inserts a dash between numbers such as 2-1 and 2-2.
LIST Accesses the saved channel list.
FLASHBK Alternates between the two last channels selected (pressing repeatedly).
Adjusts the volume level.
VOL
FAV Accesses your favorite channel list; Selects a menu or option.
INFO Shows information on the current program.
Mutes all sounds.
MUTE
Scrolls through the saved channels.
CH
Moves to the previous or next screen.
PAGE
Accesses the AV devices connected to the TV; Opens the SIMPLINK
menu.
Accesses the Home menu.
SMART
MY APPS Shows the list of Apps.
SETTINGS Accesses the main menu.
Q.MENU Accesses the quick menu.
Navigation buttons Scrolls through menus or options. (up/down/left/right)
OK Selects menus or options and confirms your input.
BACK Returns to the previous screen.
EXIT Clears all on-screen displays and returns to TV viewing.
SLEEP Sets the length of time until the TV to turns off.
VD/ Enables VD function. SAP (Secondary Audio Program) feature can also be
enabled by pressing the VD key.
Control buttons ( , , , , ) Controls the SIMPLINK compatible devices
(USB,SIMPLINK).
(Freeze) Freezes the current frame (Not supported when using USB Mode and
Simplink).
Color buttons These access special functions in some menus.
( : Red, : Green, : Yellow, : Blue)
REMOTE CONTROL
21
(For PB6900 series)
(POWER) Turns the TV on or off.
TV Returns to the last TV channel.
CAPTION Activates or deactivates the subtitles.
AV MODE Selects an AV mode.
RATIO Resizes an image.
INPUT Changes the input source. Turns the TV on if it is off.
FLASHBK
Number button Enters numbers.
- (Dash) Inserts a dash between numbers such as 2-1 and 2-2.
LIST Accesses the saved channel list.
FLASHBK Alternates between the two last channels selected (pressing repeatedly).
Adjusts the volume level.
VOL
FAV Accesses your favorite channel list; Selects a menu or option.
Used for viewing 3D video.
Mutes all sounds.
MUTE
Scrolls through the saved channels.
CH
Moves to the previous or next screen.
PAGE
INFO
SMART
Shows information on the current program.
Accesses the Home menu.
SMART
MY APPS Shows the list of Apps.
SETTINGS Accesses the main menu.
Q.MENU Accesses the quick menu.
Navigation buttons Scrolls through menus or options. (up/down/left/right)
OK Selects menus or options and confirms your input.
BACK Returns to the previous screen.
EXIT Clears all on-screen displays and returns to TV viewing.
Accesses the AV devices connected to the TV; Opens the SIMPLINK
menu.
VD/ Enables VD function. SAP (Secondary Audio Program) Feature can also be
enabled by pressing the VD key.
Control buttons ( , , , , ) Controls the SIMPLINK compatible devices
(USB,SIMPLINK).
(Freeze) Freezes the current frame (Not supported when using USB Mode and
Simplink).
Color buttons These access special functions in some menus.
( : Red, : Green, : Yellow, : Blue)
ENGLISH
VD/
MY APPS
22
USING THE USER GUIDE
USING THE USER GUIDE
User Guide allows you to more easily access
the detailed TV information.
1
Press SMART
menu.
2
3
Select SETTINGS → SUPPORT.
button to access the Home
Select User Guide and press the
Wheel (OK ) button.
SUPPORT
ENGLISH
User Guide
SPECIFICATIONS
23
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrade of product functions.
Power requirement
AC 110 - 240 V ~ 50 / 60 Hz
Television System
NTSC-M, ATSC, 64 & 256 QAM
Program Coverage
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135
75 Ω
Operating Temperature 0°C ~ 40 °C (32 °F ~ 104 °F)
External Antenna Impedance
Environment
condition
Operating Humidity
Less than 80 %
Storage Temperature
-20°C ~ 60 °C (-4 °F ~ 140 °F)
Storage Humidity
Less than 85 %
50PB6600
(50PB6600-UA)
MODELS
Weight
With stand
Without stand
46.1 x 29.7 x 12.4 (inch)
54.7 x 34.6 x 13.3 (inch)
1172 x 700.9 x 56 (mm)
1390.8 x 823.7 x 56 (mm)
46.1 x 27.5 x 2.2 (inch)
54.7 x 32.4 x 2.2 (inch)
With stand
24.9 Kg (54.8 lbs)
35.7 Kg (78.7 lbs)
Without stand
23.3 Kg (51.3 lbs)
33 Kg (72.7 lbs)
2.3 A / 250 W
3.3 A / 360 W
Current Value / Power consumption
(For 50/60PB6650, 60PB6900)
Wireless module (LGSBW41) Specifications
Wireless LAN
Bluetooth
Standard
IEEE 802.11a/b/g/n
Standard
Bluetooth Version 3.0
Frequency Range
2400 to 2483.5 MHz
5150 to 5250 MHz
5725 to 5850 MHz
Frequency Range
2400 ~ 2483.5 MHz
Output Power (Max.)
802.11a: 11.5 dBm
802.11b: 11 dBm
802.11g: 10.5 dBm
802.11n - 2.4 GHz: 11 dBm
802.11n - 5 GHz: 12.5 dBm
Output Power (Max.)
10 dBm or lower
yyBecause band channel used by the country could be different, the user can not change or adjust the operating
frequency and this product is set for the regional frequency table.
yyThis device should be installed and operated with minimum distance 20 cm (7.8 inch) between the device and your
body. And this phrase is for the general statement for consideration of user environment.
yyContains FCC ID: BEJLGSBW41 / Contains IC: 2703H-LGSBW41
ENGLISH
Dimensions
(W x H x D)
50PB6650
(50PB6650-UA)
1172 x 756.7 x 315 (mm)
60PB6600
(60PB6600-UA)
60PB6650
(60PB6650-UA)
60PB6900
(60PB6900-UA)
1390.8 x 880.9 x 340 (mm)
24
MAINTENANCE
MAINTENANCE
Cleaning your TV
Clean your TV regularly to keep it at peak performance and to extend the product lifespan.
CAUTION
Before cleaning, turn the power off and disconnect the power cord and all other cables.
yy
When the TV is left unattended or unused for a long time, disconnect the power cord from the wall
yy
outlet to prevent possible damage from lightning or power surges.
Screen, frame, cabinet, and stand
To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
ENGLISH
CAUTION
Do not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in
yy
scratches on the screen and image distortions.
Do not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air fresheners,
yy
or lubricants, as these may damage the screen’s finish and cause discoloration.
Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or
yy
malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING / EXTERNAL CONTROL DEVICE SETUP
25
TROUBLESHOOTING
Problem
Solution
Cannot control the TV with
the remote control.
yyCheck the remote control sensor on the product and try again.
yyCheck if there is any obstacle between the product and the remote control.
to
yyCheck if the batteries are still working and properly installed ( to ,
No image display and no
sound is produced.
yyCheck if the product is turned on.
yyCheck if the power cord is connected to a wall outlet.
yyCheck if there is a problem in the wall outlet by connecting other products.
The TV turns off suddenly.
yyCheck the power control settings. The power supply may be interrupted.
yyCheck if the Off Time / Sleep Timer feature is activated in the Time settings.
yyIf there is no signal while the TV is on, the TV will turn off automatically after
15 minutes of inactivity.
).
EXTERNAL CONTROL DEVICE SETUP
To obtain the external control device setup information, please visit www.lg.com .
ENGLISH
CHILD SAFETY:
PROPER TELEVISION PLACEMENT MATTERS
THE CONSUMER ELECTRONICS INDUSTRY CARES
• Manufacturers, retailers and the rest of the consumer electronics industry are committed to
making home entertainment safe and enjoyable.
• As you enjoy your television, please note that all televisions – new and old- must be supported on
proper stands or installed according to the manufacturer’s recommendations. Televisions that
are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, carts, etc.,
may fall over, resulting in injury.
TUNE IN TO SAFETY
• ALWAYS follow the manufacturer’s recommendations for the safe installation of your television.
• ALWAYS read and follow all instructions for proper use of your television.
• NEVER allow children to climb on or play on the television or the furniture on which the television
is placed.
• NEVER place the television on furniture that can easily be used as steps, such as a chest of
drawers.
• ALWAYS install the television where it cannot be pushed, pulled over or knocked down.
• ALWAYS route cords and cables connected to the television so that they cannot be tripped
over, pulled or grabbed.
WALL OR CEILING MOUNT YOUR TELEVISION
• ALWAYS contact your retailer about professional installation if you have any doubts about your
ability to safely mount your television.
• ALWAYS use a mount that has been recommended by the television manufacturer and has a
safety certification by an independent laboratory (such as UL, CSA, ETL).
• ALWAYS follow all instructions supplied by the television and mount manufacturers.
• ALWAYS make sure that the wall or ceiling where you are mounting the television is appropriate.
Some mounts are not designed to be mounted to walls and ceilings with steel studs or cinder
block construction. If you are unsure, contact a professional installer.
• Televisions can be heavy. A minimum of two people is required for a wall or ceiling mount
installation.
MOVING AN OLDER TELEVISION TO A NEW PLACE IN
YOUR HOME
• Many new television buyers move their older CRT televisions into a secondary room after the
purchase of a flat-panel television. Special care should be made in the placement of older CRT
televisions.
• ALWAYS place your older CRT television on furniture that is sturdy and appropriate for its size
and weight.
• NEVER place your older CRT television on a dresser where children may be tempted to use the
drawers to climb.
• ALWAYS make sure your older CRT television does not hang over the edge of your furniture.
CE.org/safety
Declaration of Conformity
Trade Name: LG
Model : 5
0PB6600-UA, 60PB6600-UA, 50PB6650-UA,
60PB6650-UA, 60PB6900-UA
Responsible Party: LG Electronics Inc.
Address: 1 000 Sylvan Ave.
Englewood Cliffs NJ 07632
U.S.A
TEL: 201-266-2534
LG Customer Information Center
For inquires or comments, visit www.lg.com or call;
The model and serial numbers of the TV are
located on the back and one side of the TV.
Record them below should you ever need service.
MODEL
SERIAL
1-800-243-0000 USA, Consumer User
1-888-865-3026 USA, Commercial User
1-888-542-2623 CANADA
Register your product Online!
www.lg.com