Ino™ 8 in. Widespread 2-Handle Bathroom Faucet

I N S TA L L AT I O N MA N UA L
Ino™ 8 in. Widespread 2-Handle
Bathroom Faucet
KEF-15703
www.kraususa.com I toll free: 1.800.775.0703 I © 2016 Kraus USA Inc.
Thank you for purchasing Kraus
We would like to take this opportunity to thank you for your business with Kraus
USA. It is our sincere hope that you are completely satisfied with your experience.
We welcome any questions or comments you may have, and will be glad to assist
you in the future.
For more information about Kraus products, please visit our website at:
www.kraususa.com
Please register your new Kraus product at the following web address in order to
activate the warranty and receive the full benefit of customer support:
www.kraususa.com/registration
Sincerely,
Kraus Customer Service Department
2
10 1/8”
(257mm)
8 5/16”
(21mm)
∅ 1 15/16”
(∅ 50mm)
1 3/8”
(35mm)
∅ 1 3/4”
(∅ 45mm)
∅ 1 15/16”
(∅ 50mm)
Prior to Installation:
•
Make sure you have all necessary parts by checking the diagram and parts list. If
any part is missing or damaged, please contact Kraus Customer Service at 800775-0703 for a replacement.
•
9/16”-18UNEF
•
Turn off the hot and cold water supply at the angle stops and turn on the old
1 1/4-18UNF-2A
faucet to release any built up pressure. Remove existing faucet. Clean sink or
countertop to remove any debris, plumber’s putty, or silicone
Place bucket under angle stops. Turn on to flush any debris prior to installing new
plumbing. Shut off angle stops
•
Pre-drilled hole size requirement: 1-1/4” x 3
•
Max countertop thickness: 1-1/4”
Tools you will need:
Adjustable Wrench
Phillips Screwdriver
Safety Goggles
Bucket
3
Diagram and Parts List
E1
E2
E3
E4
A. Faucet Body
B. Hot Water Valve
C. Cold Water Valve
D. Base O-Ring
F
G
E. Mounting Hardware
Assembly
E1. Rubber O-Washer
E2. Metal O-Washer
E3. Mounting Nut
E4. Mounting Screws
F. Waterlines
G. Three Way Connector
4
Faucet Dimensions
(5”)
128mm
(1-3/8”)
Ø35mm
(1-3/8”)
Ø35mm
(1-3/8”)
Ø35mm
(1-1/4”)
MAX 30
(2 -1/8")
55mm
(5 -1/8”)
130mm
(8”)
203mm
(6-3/4”)
171mm
2-M10X1
(4")
100mm
(4”)
100mm
5
Step 1
Remove three way connector
(G). Remove mounting hardware
assembly (E)
B
E
E
G
Step 2
E
G
Place faucet
body (A) through
B
1-1/4” hole in countertop orCsink
with base o-ring attached (D)
Installer Tip: Base o-ring (D) is
embedded
at base
G of faucet
E
E
body (A)
E
Step 3
G
B
C
E
6
G
Install hot and cold water
valves (B & C). Attach & secure
mounting hardware assembly (E)
and three way connector (G)
Attach to Hot
Angle Stop
E
F
Atta
Ang
G
F
Step 4
B
D
Hot
Cold
Attach to Hot
Angle Stop
F
Attach to Cold
Angle Stop
G
F
Installer Tip: Make sure grid
washers are installed at end of
E
waterlines prior to installation
E D
F
* Grid Washer
Attach waterlines (F). HANDTIGHTEN ONLY. Thread other
end of waterlines (F) to three
way connector (G). Connect
2nd supply line to angle stop
and tighten until snug. Turn on
angle stops and check for leaks
(DO NOT TURN FAUCET ON)
G
G
Step 5
Turn faucet on for one minute to
remove any debris
E1
E2
E3
E4
F
7
G
Replacement Part List - KEF-15703
1
2B
2A
3
14
15
4
5
13
6
7
8
9
10
11
12
8
Parts
Part Number
Parts
Part Number
1. Faucet Body
KP1012
8. Rubber O-Washer
KP1007
2A. Handle Cap Hot
KP1013
9. Metal O-Washer
KP1016
2B. Handle Cap Cold
KP1014
10. Mounting Nut
KP1017
3. Rubber Flow Guide
KP1005
11.Mounting Screws KP1010
4. Screw
KP1015
12. Three Way
Connector
KP1018
5. Washer
KP1002
13. O-Ring
KP1003
6. Plastic Sleeve
KP1004
14. Waterlines
KP1019
7. Base O-Ring
KP1006
15. Waterlines
KP1020
Trouble - Shooting
If you have followed the instructions carefully and your faucet still does not work
properly, take the following corrective steps:
PROBLEM
Leakage from base of
faucet or angle stop
CAUSE
O-rings on waterlines (14 &
15) may be compromised
ACTION
Make sure waterlines (14 &
15) are securely fastened
on angle stops, three way
connector (12), & base of
faucet
Make sure o-rings are
secure at either end of
waterlines (14 & 15)
Make sure waterlines (14
& 15) are not frayed or
cracked
9
Certifications:
NSF/ANSI 372
GREEN
LEAD FREE
IA
P
MO
R
&T
NSF/ANSI 61
ASME A112.18.1M
1.2 gpm 4.5L/min maximum
TM
Water Efficiency
KRAUS LIMITED LIFETIME WARRANTY
This product has been manufactured and tested to the highest quality standards by
Kraus USA Inc. (“Kraus”). We offer our customers thoughtfully crafted fixtures & accessories, engineered for enduring performance over years of use.
WHO IS COVERED BY THE WARRANTY
This warranty extends to the original purchaser only. This warranty is not transferable,
between homes or owners and is only applicable to residential use.
WHAT IS COVERED BY THE WARRANTY
Kraus warranties this product against defects due to material or craftsmanship error
during the warranty period: Kraus will provide replacement parts at no charge, or at
its option, replace any product or part of the product that is deemed defective, under
normal installation, use, service and maintenance. If Kraus is unable to provide a replacement and repair is not practical or cannot be made in timely fashion, Kraus may elect to
refund the purchase price in exchange for the return of the product.
CONDITIONS AND EXCLUSIONS
Like other home fixtures, Kraus products will require light maintenance to ensure proper
function. We provide you with complete knowledge to perform this maintenance and
can also recommend resources if you are unable to fulfill this service.
A. Kraus will not be responsible for product failures due to lack of maintenance or proper
use. Please read your care and maintenance documentation to determine the limits of
proper use.
B. The original sales receipt, order number, and/or proof of purchase must be presented
at the time of the warranty claim, without exception, for this warranty to be applied to all
Kraus products.
C. Kraus recommends installing all Kraus products with a licensed, professional plumber.
Kraus will not be held responsible for any damage or product failure due to improper
installation, misuse, or failure to use a licensed professional. Please read your care and
maintenance documentation to determine the limits of proper use.
D. Commercial use will automatically void this warranty.
E. This warranty is not applicable to Kraus products purchased from an unauthorized
seller. For a complete list of authorized sellers please visit http://www.kraususa.com/
where-to-buy.html
10
NON-APPLICABILITY OF THIS WARRANTY
By the purchase and use of our products, you agree that Kraus is not liable for incidental,
consequential or special damages associated with the return, replacement, installation or
use of your product. This includes freight costs, cartridge replacement, labor, travel time,
lost profit, home damages and other contingent liabilities and costs (including, without
limitation, costs associated with experts, investigations, analyses, attorneys and other
professionals and services). The Kraus warranty is a comprehensive and explicit limit of
liability, and all items outside of it are not addressable by or the responsibility of Kraus.
Certain states have variances regarding implied warranties and in those situations we
remain fully compliant.
KRAUS USA Inc. makes no implication that products comply with any or all local building
or plumbing codes. It is the consumer’s responsibility to determine local code compliance. This warranty extends to the original purchaser and first consumer.
HELP LINE
Our customer service hours are Monday – Friday, 9am – 8pm EST.
Be sure to visit our website at www.kraususa.com
If you are a homeowner please contact a Kraus Customer Service Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
Toll-free 800-775-0703
Customerservice@kraususa.com
If you are a plumbing contractor or trade professional please contact a Kraus Pro
Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8955
Proservice@kraususa.com
If you are an Authorized Partner please contact a Partner Support Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8954
Partnersupport@kraususa.com
In requesting warranty service, please be ready to provide:
1. Proof of purchase.
2. A description of the problem.
11
www.kraususa.com
Download PDF
Similar pages