PowerLite® 975W/2055/2065/2155W/2165W/2245U/2250U/2255U

PowerLite® 975W/2055/2065/2155W/2165W/2245U/2250U/2255U/2265U
Quick Setup
Mobile media device
Connect tablets, smartphones, and other devices that support the MHL™
standard to the HDMI1/MHL port.
4 Press the
power button on the projector or remote control. The
projector beeps, the Status light flashes blue, and then stays on.
Install the batteries as shown (two AA batteries).
Before using the projector, make sure you read the safety instructions in the
online User’s Guide.
Note: Your product may differ from the illustrations on this sheet, but the
instructions are the same.
Using the remote control
MHL cable
Streaming device
Connect the projector
Choose from the following connections. See the sections below or the online
User’s Guide for details.
Some devices may require an adapter or may not require an MHL cable. Not
all features or functions may be supported. Check your device’s documentation
for more information.
Note: To shut down the projector, press the
5 U se the arrow buttons on the remote control to highlight any of the
Turn projector
on and off
options on the Home screen that appears, then press
to select it.
You can display a QR code, switch between projection sources, and
quickly access various adjustment options from this screen.
HDBaseT™ transmitter (PowerLite 2165W/2265U)
Computer
power button twice.
Connect an HDBaseT transmitter to the HDBaseT port.
Choose which source
to display
USB cable
Ethernet cable
HDMI cable
Access projector
menus
3.5 mm stereo mini cable
VGA cable
Note: Make sure the projector and HDBaseT transmitter are turned off when
connecting or disconnecting the network cable between them.
Computer port
Camera, USB device, or document camera
Connect one end of a VGA cable to the projector’s Computer1 or
Computer2/Monitor Out port, and the other end to your laptop or
computer’s
monitor port. Make sure to switch your laptop to external
display (see “Troubleshooting” on the back of this sheet). You can also
connect an audio cable.
Connect a digital camera, USB flash drive, USB storage device, or Epson DC-07
document camera to the projector’s USB-A (flat) port.
HDMI port
USB cable
Connect one end of an HDMI cable to the projector’s HDMI1/MHL or HDMI2
ports and the other end to an HDMI port on your computer.
USB port
Connect the square end of a USB cable to the projector’s USB-B (square) port.
Connect the flat end of the cable to any USB port on your computer.
Windows Vista® or later: After turning on the projector, follow the on-screen
instructions to install the Epson® USB Display software (EMP_UDSE.EXE; only
on first connection). If the software screen does not display automatically, open
My Computer or Computer, then double-click EPSON_PJ_UD.
OS X 10.7.x or higher: After turning on the projector, the setup folder for
USB Display appears in the Finder. Double-click USB Display Installer and
follow the on-screen instructions to install the Epson USB Display software
(only on first connection).
Video device
Connect multiple video devices and use the Source Search button on the
projector or the remote control to switch between them.
6 The default language of the menu system is English. To select another
language, press the Menu button on the projector or remote control.
Select Extended and press
. Select Language and press
. Select
your language and press
. Press the Menu button to exit the menu
system.
Adjust the image
1
If you connect a digital camera, USB flash drive, or USB storage device, you
can use the projector’s PC Free feature. You can also connect other Epson
document cameras to the projector. See the online User’s Guide for details.
External monitor and external speakers
Turn off projector
display
2
You can also connect an external monitor and external speakers to your
projector to enhance your presentations. See the online User’s Guide for
details.
Access the Home
screen
For more information on using the remote control, see the online User’s Guide.
Project wirelessly
If you don’t see an image, press the Source Search button on the
projector or the remote control to select the image source.
Follow the steps here to install the included wireless LAN module and connect
the projector over a wireless network. With the PowerLite 2250U, you will
need the optional wireless LAN module (part number V12H731P02).
Note: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
If you’re projecting from a computer, it must have a wireless card or built‑in
wireless interface.
o raise the image, press the foot release button and lift the front of the
T
projector. Release the button to lock the foot in position.
1
2
Turn off the projector and unplug the power cord.
3
emove the screw securing the wireless LAN module stopper and
R
remove the stopper.
4
Insert the wireless LAN module into the port.
Slide the air filter cover latch and open the air filter cover.
Turn on your equipment
1
2
Turn on your computer or video source.
Plug in the projector. The On/Standby light on the projector turns blue.
3
To reduce or enlarge the image, turn the zoom ring.
4
To sharpen the image, turn the focus ring.
RCA video cable
(composite video)
HDMI cable
RCA audio cable
Component video to VGA cable
Navigate projector
menus
3
Open the A/V Mute slide all the way.
Note: You can also press the
button on the projector to
fine-tune your adjustments. See the online User’s Guide for details.
5
our projector automatically adjusts images that are unevenly rectangular
Y
on the sides (
,
,
, or
), but if necessary you can correct
the image shape using the projector’s Screen Fit feature or keystone
correction buttons (
or
). See the online User’s Guide for details.
PowerLite® 975W/2055/2065/2155W/2165W/2245U/2250U/2255U/2265U
Quick Setup
Mobile media device
Connect tablets, smartphones, and other devices that support the MHL™
standard to the HDMI1/MHL port.
4 Press the
power button on the projector or remote control. The
projector beeps, the Status light flashes blue, and then stays on.
Install the batteries as shown (two AA batteries).
Before using the projector, make sure you read the safety instructions in the
online User’s Guide.
Note: Your product may differ from the illustrations on this sheet, but the
instructions are the same.
Using the remote control
MHL cable
Streaming device
Connect the projector
Choose from the following connections. See the sections below or the online
User’s Guide for details.
Some devices may require an adapter or may not require an MHL cable. Not
all features or functions may be supported. Check your device’s documentation
for more information.
Note: To shut down the projector, press the
5 U se the arrow buttons on the remote control to highlight any of the
Turn projector
on and off
options on the Home screen that appears, then press
to select it.
You can display a QR code, switch between projection sources, and
quickly access various adjustment options from this screen.
HDBaseT™ transmitter (PowerLite 2165W/2265U)
Computer
power button twice.
Connect an HDBaseT transmitter to the HDBaseT port.
Choose which source
to display
USB cable
Ethernet cable
HDMI cable
Access projector
menus
3.5 mm stereo mini cable
VGA cable
Note: Make sure the projector and HDBaseT transmitter are turned off when
connecting or disconnecting the network cable between them.
Computer port
Camera, USB device, or document camera
Connect one end of a VGA cable to the projector’s Computer1 or
Computer2/Monitor Out port, and the other end to your laptop or
computer’s
monitor port. Make sure to switch your laptop to external
display (see “Troubleshooting” on the back of this sheet). You can also
connect an audio cable.
Connect a digital camera, USB flash drive, USB storage device, or Epson DC-07
document camera to the projector’s USB-A (flat) port.
HDMI port
USB cable
Connect one end of an HDMI cable to the projector’s HDMI1/MHL or HDMI2
ports and the other end to an HDMI port on your computer.
USB port
Connect the square end of a USB cable to the projector’s USB-B (square) port.
Connect the flat end of the cable to any USB port on your computer.
Windows Vista® or later: After turning on the projector, follow the on-screen
instructions to install the Epson® USB Display software (EMP_UDSE.EXE; only
on first connection). If the software screen does not display automatically, open
My Computer or Computer, then double-click EPSON_PJ_UD.
OS X 10.7.x or higher: After turning on the projector, the setup folder for
USB Display appears in the Finder. Double-click USB Display Installer and
follow the on-screen instructions to install the Epson USB Display software
(only on first connection).
Video device
Connect multiple video devices and use the Source Search button on the
projector or the remote control to switch between them.
6 The default language of the menu system is English. To select another
language, press the Menu button on the projector or remote control.
Select Extended and press
. Select Language and press
. Select
your language and press
. Press the Menu button to exit the menu
system.
Adjust the image
1
If you connect a digital camera, USB flash drive, or USB storage device, you
can use the projector’s PC Free feature. You can also connect other Epson
document cameras to the projector. See the online User’s Guide for details.
External monitor and external speakers
Turn off projector
display
2
You can also connect an external monitor and external speakers to your
projector to enhance your presentations. See the online User’s Guide for
details.
Access the Home
screen
For more information on using the remote control, see the online User’s Guide.
Project wirelessly
If you don’t see an image, press the Source Search button on the
projector or the remote control to select the image source.
Follow the steps here to install the included wireless LAN module and connect
the projector over a wireless network. With the PowerLite 2250U, you will
need the optional wireless LAN module (part number V12H731P02).
Note: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
If you’re projecting from a computer, it must have a wireless card or built‑in
wireless interface.
o raise the image, press the foot release button and lift the front of the
T
projector. Release the button to lock the foot in position.
1
2
Turn off the projector and unplug the power cord.
3
emove the screw securing the wireless LAN module stopper and
R
remove the stopper.
4
Insert the wireless LAN module into the port.
Slide the air filter cover latch and open the air filter cover.
Turn on your equipment
1
2
Turn on your computer or video source.
Plug in the projector. The On/Standby light on the projector turns blue.
3
To reduce or enlarge the image, turn the zoom ring.
4
To sharpen the image, turn the focus ring.
RCA video cable
(composite video)
HDMI cable
RCA audio cable
Component video to VGA cable
Navigate projector
menus
3
Open the A/V Mute slide all the way.
Note: You can also press the
button on the projector to
fine-tune your adjustments. See the online User’s Guide for details.
5
our projector automatically adjusts images that are unevenly rectangular
Y
on the sides (
,
,
, or
), but if necessary you can correct
the image shape using the projector’s Screen Fit feature or keystone
correction buttons (
or
). See the online User’s Guide for details.
5
eplace the wireless LAN module stopper and secure it using the screw
R
you removed.
14If you chose the Advanced connection mode, select IP Settings and
press
.
If your network assigns addresses automatically, make sure DHCP is
turned on. If not, turn off DHCP and enter the projector’s IP Address,
Subnet Mask, and Gateway Address, as needed.
15To prevent the SSID and IP address from appearing on the network
standby screen, set the SSID Display and IP Address Display settings
to Off.
6 Close the air filter cover.
7 Plug in the power cord and turn on the projector.
8 Press the Menu button on the remote control, select the Network
menu, and press
.
9
10Select the Wireless LAN menu and press
.
17Select Complete and press
, then select Yes and press
12If you chose the Advanced connection mode, select Search Access
Point and press
. Use the arrow buttons to highlight your network
name (SSID) in the list of available connections.
13If your network has security enabled, enter your network password on
the screen that appears. Make sure to enter any uppercase or lowercase
letters in the correct case.
2
3
Select Display the QR Code and press
4
5
Tap Read QR code.
Tap
.
You can purchase screens or other accessories from an Epson authorized
reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you
can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca
(Canadian sales).
iProjection on your device’s Home screen.
save your settings.
Install network software
Click the icons on your desktop to view the software manuals. See the manuals
for instructions on installing and using the software.
Project wirelessly from a
mobile device
Install the Epson iProjection app
, select Quick (for a direct
connection to a computer, tablet, or smartphone) or Advanced (for
a connection to a router or access point), then press
again. When
you’re finished, press Esc to return to the Wireless LAN menu.
Press the Home button on the projector or remote control to bring up
the Home screen.
For a list of optional accessories, see the online User’s Guide.
again to
You can connect your mobile device and projector using Epson iProjection™
and a QR code. Make sure the latest version of Epson iProjection is installed
on your device.
11Choose Connection Mode, press
1
Optional accessories
press Esc.
To monitor and control your projector over the network, install the EasyMP®
Monitor software (Windows® only). To project from multiple PCs over the
network, install the EasyMP Multi PC Projection software. To update your
projector’s firmware over a wired LAN, install the EasyMP Network Updater
software.
.
Make sure your projector and mobile device are connected to the same
wireless network.
16When you’re finished selecting settings in the Wireless LAN menu,
Links to download the network software and to the manuals are available
from the projector CD. Downloads require an Internet connection. You can
also download the software and manuals from the Epson website, as described
in “Where to get help.”
Choose Network Configuration and press
Wireless network connection
To project from an iOS or Android™ device, download and install the Epson iProjection app.
Visit www.epson.com/projectorapp (U.S.) or
www.epson.ca/projectorapp (Canada) for more information.
Direct wireless connection
Make sure your device and Epson projector are not connected to a network
and your Epson projector’s Connection Mode is set to Quick.
1
Press the Home button on the projector or remote control to bring up
the Home screen.
2
3
Select Display the QR Code and press
Tap
.
iProjection on your device’s Home screen.
oint your device’s camera at the QR code your projector displays; the
P
QR code is read automatically.
Your device and Epson projector are now connected.
Troubleshooting
If you see a blank screen or the No signal message after turning on your
computer or video device, check the following:
•• Make sure the Status light on the projector is blue and not flashing, and
the A/V Mute slide is open.
•• Press the Source Search button on the projector or the remote control
to switch to the correct image source, if necessary.
••
Press the Home button on the projector or remote control to verify the
source input and settings.
•• O n Windows 7 or later, hold down the Windows key and press P at the
same time, then click Duplicate.
••
If you’re using a Windows laptop, press the function key on your
keyboard that lets you display on an external monitor. It may be labeled
CRT/LCD or have an icon such as
. You may have to hold down the
Fn key while pressing it (such as Fn + F7). Wait a moment for the display
to appear.
•• If you’re using a Mac laptop, open System Preferences and select
Displays. Click the Arrangement tab and select the Mirror Displays
checkbox.
Where to get help
Manuals
For more information about using the projector, click the icons on your
desktop to access the online manuals (requires an Internet connection). If you
don’t see icons to the manuals, you can install them from the projector CD or
go to the Epson website, as described below.
Telephone support services
••
••
••
o select a number or character, use the arrow buttons on the
T
remote control to highlight it, then press
.
o switch between uppercase and lowercase letters, select CAPS
T
and press
.
o change the displayed symbols, select SYM1 or SYM2 and
T
press
.
When you’re finished entering the network password, select Finish
and press
.
To use the Epson PrivateLine® Support service, call (800) 637-7661. This service
is available for the duration of your warranty period. You may also speak with
a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).
4
5
Tap Read QR code.
oint your device’s camera at the QR code your projector displays; the
P
QR code is read automatically.
Support hours are 6 AM to 8 PM, Pacific Time, Monday through Friday, and
7 AM to 4 PM, Pacific Time, Saturday. Days and hours of support are subject to
change without notice. Toll or long distance charges may apply.
6
If you are using an iOS device, follow the on-screen prompts to register
your projector’s Wi-Fi profile.
Internet support
Your device and Epson projector are now connected.
Visit www.epson.com/support (U.S.) or www.epson.ca/support
(Canada) for solutions to common problems. You can download utilities and
documentation, get FAQs and troubleshooting advice, or e-mail Epson.
Registration
Register today to get product updates and exclusive offers. You can use the CD
included with your projector or register online at www.epson.com/webreg.
EPSON, EasyMP, and PowerLite are registered trademarks, Epson iProjection is a trademark, and EPSON Exceed
Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark of Epson
America, Inc.
Mac and OS X are trademarks of Apple Inc., registered in the U.S. and other countries.
Android is a trademark of Google Inc.
HDBaseT and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.
General Notice: Other product names used herein are for identification purposes only and may be trademarks
of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2016 Epson America, Inc., 10/16
Printed in XXXXXX CPD-52404R1
5
eplace the wireless LAN module stopper and secure it using the screw
R
you removed.
14If you chose the Advanced connection mode, select IP Settings and
press
.
If your network assigns addresses automatically, make sure DHCP is
turned on. If not, turn off DHCP and enter the projector’s IP Address,
Subnet Mask, and Gateway Address, as needed.
15To prevent the SSID and IP address from appearing on the network
standby screen, set the SSID Display and IP Address Display settings
to Off.
6 Close the air filter cover.
7 Plug in the power cord and turn on the projector.
8 Press the Menu button on the remote control, select the Network
menu, and press
.
9
10Select the Wireless LAN menu and press
.
17Select Complete and press
, then select Yes and press
12If you chose the Advanced connection mode, select Search Access
Point and press
. Use the arrow buttons to highlight your network
name (SSID) in the list of available connections.
13If your network has security enabled, enter your network password on
the screen that appears. Make sure to enter any uppercase or lowercase
letters in the correct case.
2
3
Select Display the QR Code and press
4
5
Tap Read QR code.
Tap
.
You can purchase screens or other accessories from an Epson authorized
reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you
can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca
(Canadian sales).
iProjection on your device’s Home screen.
save your settings.
Install network software
Click the icons on your desktop to view the software manuals. See the manuals
for instructions on installing and using the software.
Project wirelessly from a
mobile device
Install the Epson iProjection app
, select Quick (for a direct
connection to a computer, tablet, or smartphone) or Advanced (for
a connection to a router or access point), then press
again. When
you’re finished, press Esc to return to the Wireless LAN menu.
Press the Home button on the projector or remote control to bring up
the Home screen.
For a list of optional accessories, see the online User’s Guide.
again to
You can connect your mobile device and projector using Epson iProjection™
and a QR code. Make sure the latest version of Epson iProjection is installed
on your device.
11Choose Connection Mode, press
1
Optional accessories
press Esc.
To monitor and control your projector over the network, install the EasyMP®
Monitor software (Windows® only). To project from multiple PCs over the
network, install the EasyMP Multi PC Projection software. To update your
projector’s firmware over a wired LAN, install the EasyMP Network Updater
software.
.
Make sure your projector and mobile device are connected to the same
wireless network.
16When you’re finished selecting settings in the Wireless LAN menu,
Links to download the network software and to the manuals are available
from the projector CD. Downloads require an Internet connection. You can
also download the software and manuals from the Epson website, as described
in “Where to get help.”
Choose Network Configuration and press
Wireless network connection
To project from an iOS or Android™ device, download and install the Epson iProjection app.
Visit www.epson.com/projectorapp (U.S.) or
www.epson.ca/projectorapp (Canada) for more information.
Direct wireless connection
Make sure your device and Epson projector are not connected to a network
and your Epson projector’s Connection Mode is set to Quick.
1
Press the Home button on the projector or remote control to bring up
the Home screen.
2
3
Select Display the QR Code and press
Tap
.
iProjection on your device’s Home screen.
oint your device’s camera at the QR code your projector displays; the
P
QR code is read automatically.
Your device and Epson projector are now connected.
Troubleshooting
If you see a blank screen or the No signal message after turning on your
computer or video device, check the following:
•• Make sure the Status light on the projector is blue and not flashing, and
the A/V Mute slide is open.
•• Press the Source Search button on the projector or the remote control
to switch to the correct image source, if necessary.
••
Press the Home button on the projector or remote control to verify the
source input and settings.
•• O n Windows 7 or later, hold down the Windows key and press P at the
same time, then click Duplicate.
••
If you’re using a Windows laptop, press the function key on your
keyboard that lets you display on an external monitor. It may be labeled
CRT/LCD or have an icon such as
. You may have to hold down the
Fn key while pressing it (such as Fn + F7). Wait a moment for the display
to appear.
•• If you’re using a Mac laptop, open System Preferences and select
Displays. Click the Arrangement tab and select the Mirror Displays
checkbox.
Where to get help
Manuals
For more information about using the projector, click the icons on your
desktop to access the online manuals (requires an Internet connection). If you
don’t see icons to the manuals, you can install them from the projector CD or
go to the Epson website, as described below.
Telephone support services
••
••
••
o select a number or character, use the arrow buttons on the
T
remote control to highlight it, then press
.
o switch between uppercase and lowercase letters, select CAPS
T
and press
.
o change the displayed symbols, select SYM1 or SYM2 and
T
press
.
When you’re finished entering the network password, select Finish
and press
.
To use the Epson PrivateLine® Support service, call (800) 637-7661. This service
is available for the duration of your warranty period. You may also speak with
a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).
4
5
Tap Read QR code.
oint your device’s camera at the QR code your projector displays; the
P
QR code is read automatically.
Support hours are 6 AM to 8 PM, Pacific Time, Monday through Friday, and
7 AM to 4 PM, Pacific Time, Saturday. Days and hours of support are subject to
change without notice. Toll or long distance charges may apply.
6
If you are using an iOS device, follow the on-screen prompts to register
your projector’s Wi-Fi profile.
Internet support
Your device and Epson projector are now connected.
Visit www.epson.com/support (U.S.) or www.epson.ca/support
(Canada) for solutions to common problems. You can download utilities and
documentation, get FAQs and troubleshooting advice, or e-mail Epson.
Registration
Register today to get product updates and exclusive offers. You can use the CD
included with your projector or register online at www.epson.com/webreg.
EPSON, EasyMP, and PowerLite are registered trademarks, Epson iProjection is a trademark, and EPSON Exceed
Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark of Epson
America, Inc.
Mac and OS X are trademarks of Apple Inc., registered in the U.S. and other countries.
Android is a trademark of Google Inc.
HDBaseT and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.
General Notice: Other product names used herein are for identification purposes only and may be trademarks
of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2016 Epson America, Inc., 10/16
Printed in XXXXXX CPD-52404R1
Download PDF
Similar pages