AW-IHT-1270 - A1 Security Cameras

AW-IHT-1270
Industrial Managed PoE Switch
L2 Managed Function • Gigabit Interface • -40°C to 75°C •
Redundant Ring • Redundant Power
The AW-IHT-1270 Industrial Managed Switch is equipped with
8 port 10/100/1000Base-T and 4 Gigabit SFP slots that are
PoE compliant. Engineered with hardened components and
enclosed in a rugged case, the switch can operate in wide
temperatures from -40°C to 75°C and excellent tolerance
capability to high vibration and shock. As an Industrial switch,
the AW-IHT-1270 suits your heavy industrial environments and
yet contains all the standard features of other switches.
PoE function on 8 ports 10/100/1000 Base-T complies with IEEE
802.3at standards and allows to supply up to 30W per port for
network attached devices such as WLAN Access Points, VoIP
phones and IP surveillance cameras that can be powered by
Ethernet connectivity. The AW-IHT-1270 eliminates the need for
installing additional power outlets or adapters, thus network
power planning is simplified and overall installation and
maintenance costs are reduced. In addition, the Layer 2 switch
offers a full complement of management functions to allow
easy-to-use configuration and monitoring.
Key Features
•Robust Switch Performance
•Intelligent PoE for Powered Devices
•Redundant Power System
Alive!
•Efficient Network Monitoring and Proactive Capability
•Bandwidth Management to Prevent Unpredictable Network
Status
•Redundant Ring and Fast Recovery for Surveillance System
PoE Camera
PoE Camera is "No Response!"
PoE Camera
"Restart" the PoE Device
PoE Alive-Checking
Power On
Power Off
AM06:00 ~ PM06:00
PoE Scheduling
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
PM06:00 ~ AM06:00
Applications
Redundant Ring: It incorporates, advanced Redundant Ring
technologies, into customer’s industrial automation and
surveillance network to enhance system reliability and uptime
in harsh factory environments.
LAN
Fiber
PoE
Control Center
Ring
Factory A
Factory B
Factory C
Technical Specifications
Standards
IEEE 802.3
10BASE-T
IEEE 802.3u
100BASE-TX
IEEE 802.3ab
1000BASE-T
IEEE 802.3z
1000BASE-SX/LX
IEEE 802.3x
Flow Control
IEEE 802.3ad
Link Aggregation
IEEE 802.1d
STP
IEEE 802.1w
RSTP
IEEE 802.1p
Diagnostics
LED status, SNMP trap, E-mail alarm, SFP
DDMI, Port Mirroring, Port Statistic, SNTP,
RMON, Syslog
L3 Function
Static Routing
Power
Input Voltage
Primary Inputs: 48V (48~57VDC)
Redundant Inputs: 48V (48~57VDC)
Power Consumption
260W (with 8 PoE fully loaded)
Alarm Relay
One relay output with current carrying
capacity of 1 A @ 24V DC
CoS Prioritization
PoE Function
Per port up to 30W
IEEE 802.1q
VLAN Tagging
Interface
IEEE 802.1x
Port Authentication
IEEE 802.3af
Power over Ethernet
IEEE 802.3at
Power over Ethernet Plus
Network Management
Ports
8 x 10/100/1000Base-T
4 x Gigabit SFP Slots
1 x Console Port (RJ-45 to RS-232)
Mechanical and Environment
Housing
IP30 Protection
Mounting
DIN-Rail
Configuration
Command Line Interface, Telnet, Web
GUI, SNMP v1/v2c/v3, Management
VLAN, System log, Firmware Upgradable,
Configuration Upload/Download
Operating Temperature
-40°C ~ 75°C (-40°F ~ 167°F)
VLAN
IEEE 802.1Q, GARP/GVRP support, Portbased VLAN, 4K active VLAN support,
Q-in-Q
Storage Temperature
-40°C ~ 85°C (-40°F ~ 185°F)
Operating Humidity
10 to 95% RH (non-condensing)
Redundancy
Xpress Ring, Dual Homing, ERPS, STP/
RSTP, LACP
Storage Humidity
5 to 95% RH (non-condensing)
Access Control List, SSH, Port Security,
802.1x Port Authentication, DHCP
snooping, MAC limitation
Weight
860g
Security
Dimension (WxHxD)
50x161.5x122.2mm (1.97x6.36x4.81inch)
DIP Switch
Ports/PWR/RPS Alarm setting
Traffic control
IGMP snooping/Querier, QoS, Flow
Control, Abnormal Traffic Detection, Rate
Limitation, Storm Control, Port Isolation,
Loop Detection
LED Panel
PWR, RPS, ALM, POST, PoE ports, 1000,
10/100
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
Technical Specifications
Standards and Certifications
EMI
FCC Part 15 Subpart B Class A
EN55022 : class A
EN 55011 : 2009 class A
EN 61000-6-4
Industrial SFP
Transceiver
Dimensions
EMS
EN 55024
EN 61000-6-2
IEC/EN 61000-4-2 (ESD) : Level 4
IEC/EN 61000-4-3 (RS) : Level 3
IEC/EN 61000-4-4 (Burst) : Level 3
IEC/EN 61000-4-5 (Surge) : Level 3
IEC/EN 61000-4-6 (CS) : Level 3
SFP-1000-MM85-x5I
1000Base-SX 1.25G, Multi-mode SFP, 500M
SFP-1000-MM13-02I
1000Base-SX 1.25G, Multi-mode, 3.3V, 1310nm, 2KM
SFP-1000-SM13-10I
1000Base-LX 1.25G, Single mode SFP, 10KM
SFP-1000-SM13-40I
1000Base-LX 1.25G, Single Mode SFP Module, 40KM
50 mm
131 mm
Approval & Test
IEC 60068-2-27
IEC 60068-2-32
Vibration
IEC 60068-2-6
162 mm
Shock Freefall
Optional Accessories
Power Supply
NDR-240-48 : 240W 48V DC Supply, -25°C~70°C
NDR-480-48 : 480W 48V DC Supply, -25°C~70°C
All specifications are subject to change without notice. Copyright © VIVOTEK INC. All rights reserved. Ver. 4
6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C. | T: +886-2-82455282 | F: +886-2-82455532 | E: sales@vivotek.com | W: www.vivotek.com
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
Download PDF
Similar pages